// File: @openzeppelin/contracts/GSN/Context.sol

// SPDX-License-Identifier: MIT

pragma solidity ^0.6.0;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

// File: @openzeppelin/contracts/access/Ownable.sol


pragma solidity ^0.6.0;

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor () internal {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(_owner == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}

// File: @openzeppelin/contracts/token/ERC20/IERC20.sol


pragma solidity ^0.6.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// File: @openzeppelin/contracts/math/SafeMath.sol


pragma solidity ^0.6.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction overflow");
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, "SafeMath: modulo by zero");
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts with custom message when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }
}

// File: @openzeppelin/contracts/utils/Address.sol


pragma solidity ^0.6.2;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies in extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return _functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        return _functionCallWithValue(target, data, value, errorMessage);
    }

    function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// File: @openzeppelin/contracts/token/ERC20/SafeERC20.sol


pragma solidity ^0.6.0;




/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using SafeMath for uint256;
    using Address for address;

    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        // solhint-disable-next-line max-line-length
        require((value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).add(value);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) { // Return data is optional
            // solhint-disable-next-line max-line-length
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

// File: @openzeppelin/contracts/utils/Pausable.sol


pragma solidity ^0.6.0;


/**
 * @dev Contract module which allows children to implement an emergency stop
 * mechanism that can be triggered by an authorized account.
 *
 * This module is used through inheritance. It will make available the
 * modifiers `whenNotPaused` and `whenPaused`, which can be applied to
 * the functions of your contract. Note that they will not be pausable by
 * simply including this module, only once the modifiers are put in place.
 */
contract Pausable is Context {
    /**
     * @dev Emitted when the pause is triggered by `account`.
     */
    event Paused(address account);

    /**
     * @dev Emitted when the pause is lifted by `account`.
     */
    event Unpaused(address account);

    bool private _paused;

    /**
     * @dev Initializes the contract in unpaused state.
     */
    constructor () internal {
        _paused = false;
    }

    /**
     * @dev Returns true if the contract is paused, and false otherwise.
     */
    function paused() public view returns (bool) {
        return _paused;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is not paused.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    modifier whenNotPaused() {
        require(!_paused, "Pausable: paused");
        _;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is paused.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    modifier whenPaused() {
        require(_paused, "Pausable: not paused");
        _;
    }

    /**
     * @dev Triggers stopped state.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    function _pause() internal virtual whenNotPaused {
        _paused = true;
        emit Paused(_msgSender());
    }

    /**
     * @dev Returns to normal state.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    function _unpause() internal virtual whenPaused {
        _paused = false;
        emit Unpaused(_msgSender());
    }
}

// File: contracts/interfaces/IChi.sol


pragma solidity ^0.6.12;



interface IChi is IERC20 {
    function mint(uint256 value) external;
    function free(uint256 value) external returns (uint256 freed);
    function freeFromUpTo(address from, uint256 value) external returns (uint256 freed);
}

// File: contracts/interfaces/IERC20Permit.sol


pragma solidity ^0.6.12;


interface IERC20Permit {
    function permit(address owner, address spender, uint256 amount, uint256 deadline, uint8 v, bytes32 r, bytes32 s) external;
}

// File: contracts/interfaces/IGasDiscountExtension.sol


pragma solidity ^0.6.12;



interface IGasDiscountExtension {
    function calculateGas(uint256 gasUsed, uint256 flags, uint256 calldataLength) external pure returns (IChi, uint256);
}

// File: contracts/interfaces/ISafeERC20Extension.sol


pragma solidity ^0.6.12;



interface ISafeERC20Extension {
    function safeApprove(IERC20 token, address spender, uint256 amount) external;
    function safeTransfer(IERC20 token, address payable target, uint256 amount) external;
}

// File: contracts/interfaces/IOneInchCaller.sol


pragma solidity ^0.6.12;
pragma experimental ABIEncoderV2;





interface IOneInchCaller is ISafeERC20Extension, IGasDiscountExtension {
    struct CallDescription {
        uint256 targetWithMandatory;
        uint256 gasLimit;
        uint256 value;
        bytes data;
    }

    function makeCall(CallDescription memory desc) external;
    function makeCalls(CallDescription[] memory desc) external payable;
}

// File: contracts/helpers/RevertReasonParser.sol


pragma solidity ^0.6.12;


library RevertReasonParser {
    function parse(bytes memory data, string memory prefix) internal pure returns (string memory) {
        // https://solidity.readthedocs.io/en/latest/control-structures.html#revert
        // We assume that revert reason is abi-encoded as Error(string)

        // 68 = 4-byte selector 0x08c379a0 + 32 bytes offset + 32 bytes length
        if (data.length >= 68 && data[0] == "\x08" && data[1] == "\xc3" && data[2] == "\x79" && data[3] == "\xa0") {
            string memory reason;
            // solhint-disable no-inline-assembly
            assembly {
                // 68 = 32 bytes data length + 4-byte selector + 32 bytes offset
                reason := add(data, 68)
            }
            /*
                revert reason is padded up to 32 bytes with ABI encoder: Error(string)
                also sometimes there is extra 32 bytes of zeros padded in the end:
                https://github.com/ethereum/solidity/issues/10170
                because of that we can't check for equality and instead check
                that string length + extra 68 bytes is less than overall data length
            */
            require(data.length >= 68 + bytes(reason).length, "Invalid revert reason");
            return string(abi.encodePacked(prefix, "Error(", reason, ")"));
        }
        // 36 = 4-byte selector 0x4e487b71 + 32 bytes integer
        else if (data.length == 36 && data[0] == "\x4e" && data[1] == "\x48" && data[2] == "\x7b" && data[3] == "\x71") {
            uint256 code;
            // solhint-disable no-inline-assembly
            assembly {
                // 36 = 32 bytes data length + 4-byte selector
                code := mload(add(data, 36))
            }
            return string(abi.encodePacked(prefix, "Panic(", _toHex(code), ")"));
        }

        return string(abi.encodePacked(prefix, "Unknown()"));
    }

    function _toHex(uint256 value) private pure returns(string memory) {
        return _toHex(abi.encodePacked(value));
    }

    function _toHex(bytes memory data) private pure returns(string memory) {
        bytes memory alphabet = "0123456789abcdef";
        bytes memory str = new bytes(2 + data.length * 2);
        str[0] = "0";
        str[1] = "x";
        for (uint256 i = 0; i < data.length; i++) {
            str[2 * i + 2] = alphabet[uint8(data[i] >> 4)];
            str[2 * i + 3] = alphabet[uint8(data[i] & 0x0f)];
        }
        return string(str);
    }
}

// File: contracts/helpers/UniERC20.sol


pragma solidity ^0.6.12;





library UniERC20 {
    using SafeMath for uint256;
    using SafeERC20 for IERC20;

    IERC20 private constant _ETH_ADDRESS = IERC20(0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE);
    IERC20 private constant _ZERO_ADDRESS = IERC20(0);

    function isETH(IERC20 token) internal pure returns (bool) {
        return (token == _ZERO_ADDRESS || token == _ETH_ADDRESS);
    }

    function uniBalanceOf(IERC20 token, address account) internal view returns (uint256) {
        if (isETH(token)) {
            return account.balance;
        } else {
            return token.balanceOf(account);
        }
    }

    function uniTransfer(IERC20 token, address payable to, uint256 amount) internal {
        if (amount > 0) {
            if (isETH(token)) {
                to.transfer(amount);
            } else {
                token.safeTransfer(to, amount);
            }
        }
    }

    function uniApprove(IERC20 token, address to, uint256 amount) internal {
        require(!isETH(token), "Approve called on ETH");

        if (amount == 0) {
            token.safeApprove(to, 0);
        } else {
            uint256 allowance = token.allowance(address(this), to);
            if (allowance < amount) {
                if (allowance > 0) {
                    token.safeApprove(to, 0);
                }
                token.safeApprove(to, amount);
            }
        }
    }
}

// File: contracts/OneInchExchange.sol


pragma solidity ^0.6.12;










contract OneInchExchange is Ownable, Pausable {
    using SafeMath for uint256;
    using SafeERC20 for IERC20;
    using UniERC20 for IERC20;

    uint256 private constant _PARTIAL_FILL = 0x01;
    uint256 private constant _REQUIRES_EXTRA_ETH = 0x02;
    uint256 private constant _SHOULD_CLAIM = 0x04;
    uint256 private constant _BURN_FROM_MSG_SENDER = 0x08;
    uint256 private constant _BURN_FROM_TX_ORIGIN = 0x10;

    struct SwapDescription {
        IERC20 srcToken;
        IERC20 dstToken;
        address srcReceiver;
        address dstReceiver;
        uint256 amount;
        uint256 minReturnAmount;
        uint256 guaranteedAmount;
        uint256 flags;
        address referrer;
        bytes permit;
    }

    event Swapped(
        address indexed sender,
        IERC20 indexed srcToken,
        IERC20 indexed dstToken,
        address dstReceiver,
        uint256 amount,
        uint256 spentAmount,
        uint256 returnAmount,
        uint256 minReturnAmount,
        uint256 guaranteedAmount,
        address referrer
    );

    event Error(
        string reason
    );

    function discountedSwap(
        IOneInchCaller caller,
        SwapDescription calldata desc,
        IOneInchCaller.CallDescription[] calldata calls
    )
        external
        payable
        returns (uint256 returnAmount)
    {
        uint256 initialGas = gasleft();

        address chiSource = address(0);
        if (desc.flags & _BURN_FROM_MSG_SENDER != 0) {
            chiSource = msg.sender;
        } else if (desc.flags & _BURN_FROM_TX_ORIGIN != 0) {
            chiSource = tx.origin; // solhint-disable-line avoid-tx-origin
        } else {
            revert("Incorrect CHI burn flags");
        }

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory data) = address(this).delegatecall(abi.encodeWithSelector(this.swap.selector, caller, desc, calls));
        if (success) {
            returnAmount = abi.decode(data, (uint256));
        } else {
            if (msg.value > 0) {
                msg.sender.transfer(msg.value);
            }
            emit Error(RevertReasonParser.parse(data, "Swap failed: "));
        }

        (IChi chi, uint256 amount) = caller.calculateGas(initialGas.sub(gasleft()), desc.flags, msg.data.length);
        chi.freeFromUpTo(chiSource, amount);
    }

    function swap(
        IOneInchCaller caller,
        SwapDescription calldata desc,
        IOneInchCaller.CallDescription[] calldata calls
    )
        external
        payable
        whenNotPaused
        returns (uint256 returnAmount)
    {
        require(desc.minReturnAmount > 0, "Min return should not be 0");
        require(calls.length > 0, "Call data should exist");

        uint256 flags = desc.flags;
        IERC20 srcToken = desc.srcToken;
        IERC20 dstToken = desc.dstToken;

        if (flags & _REQUIRES_EXTRA_ETH != 0) {
            require(msg.value > (srcToken.isETH() ? desc.amount : 0), "Invalid msg.value");
        } else {
            require(msg.value == (srcToken.isETH() ? desc.amount : 0), "Invalid msg.value");
        }

        if (flags & _SHOULD_CLAIM != 0) {
            require(!srcToken.isETH(), "Claim token is ETH");
            _claim(srcToken, desc.srcReceiver, desc.amount, desc.permit);
        }

        address dstReceiver = (desc.dstReceiver == address(0)) ? msg.sender : desc.dstReceiver;
        uint256 initialSrcBalance = (flags & _PARTIAL_FILL != 0) ? srcToken.uniBalanceOf(msg.sender) : 0;
        uint256 initialDstBalance = dstToken.uniBalanceOf(dstReceiver);

        caller.makeCalls{value: msg.value}(calls);

        uint256 spentAmount = desc.amount;
        returnAmount = dstToken.uniBalanceOf(dstReceiver).sub(initialDstBalance);

        if (flags & _PARTIAL_FILL != 0) {
            spentAmount = initialSrcBalance.add(desc.amount).sub(srcToken.uniBalanceOf(msg.sender));
            require(returnAmount.mul(desc.amount) >= desc.minReturnAmount.mul(spentAmount), "Return amount is not enough");
        } else {
            require(returnAmount >= desc.minReturnAmount, "Return amount is not enough");
        }

        _emitSwapped(desc, srcToken, dstToken, dstReceiver, spentAmount, returnAmount);
    }

    function _emitSwapped(
        SwapDescription calldata desc,
        IERC20 srcToken,
        IERC20 dstToken,
        address dstReceiver,
        uint256 spentAmount,
        uint256 returnAmount
     ) private {
        emit Swapped(
            msg.sender,
            srcToken,
            dstToken,
            dstReceiver,
            desc.amount,
            spentAmount,
            returnAmount,
            desc.minReturnAmount,
            desc.guaranteedAmount,
            desc.referrer
        );
    }

    function _claim(IERC20 token, address dst, uint256 amount, bytes calldata permit) private {
        // TODO: Is it safe to call permit on tokens without implemented permit? Fallback will be called. Is it bad for proxies?

        if (permit.length == 32 * 7) {
            // solhint-disable-next-line avoid-low-level-calls
            (bool success, bytes memory result) = address(token).call(abi.encodeWithSelector(IERC20Permit.permit.selector, permit));
            if (!success) {
                revert(RevertReasonParser.parse(result, "Permit call failed: "));
            }
        }

        token.safeTransferFrom(msg.sender, dst, amount);
    }

    function rescueFunds(IERC20 token, uint256 amount) external onlyOwner {
        token.uniTransfer(msg.sender, amount);
    }

    function pause() external onlyOwner {
        _pause();
    }
}

pragma solidity ^0.4.10;

/* taking ideas from FirstBlood token */
contract SafeMath {

    /* function assert(bool assertion) internal { */
    /*   if (!assertion) { */
    /*     throw; */
    /*   } */
    /* }      // assert no longer needed once solidity is on 0.4.10 */

    function safeAdd(uint256 x, uint256 y) internal returns(uint256) {
      uint256 z = x + y;
      assert((z >= x) && (z >= y));
      return z;
    }

    function safeSubtract(uint256 x, uint256 y) internal returns(uint256) {
      assert(x >= y);
      uint256 z = x - y;
      return z;
    }

    function safeMult(uint256 x, uint256 y) internal returns(uint256) {
      uint256 z = x * y;
      assert((x == 0)||(z/x == y));
      return z;
    }

}

contract Token {
    uint256 public totalSupply;
    function balanceOf(address _owner) constant returns (uint256 balance);
    function transfer(address _to, uint256 _value) returns (bool success);
    function transferFrom(address _from, address _to, uint256 _value) returns (bool success);
    function approve(address _spender, uint256 _value) returns (bool success);
    function allowance(address _owner, address _spender) constant returns (uint256 remaining);
    event Transfer(address indexed _from, address indexed _to, uint256 _value);
    event Approval(address indexed _owner, address indexed _spender, uint256 _value);
}


/*  ERC 20 token */
contract StandardToken is Token {

    function transfer(address _to, uint256 _value) returns (bool success) {
      if (balances[msg.sender] >= _value && _value > 0) {
        balances[msg.sender] -= _value;
        balances[_to] += _value;
        Transfer(msg.sender, _to, _value);
        return true;
      } else {
        return false;
      }
    }

    function transferFrom(address _from, address _to, uint256 _value) returns (bool success) {
      if (balances[_from] >= _value && allowed[_from][msg.sender] >= _value && _value > 0) {
        balances[_to] += _value;
        balances[_from] -= _value;
        allowed[_from][msg.sender] -= _value;
        Transfer(_from, _to, _value);
        return true;
      } else {
        return false;
      }
    }

    function balanceOf(address _owner) constant returns (uint256 balance) {
        return balances[_owner];
    }

    function approve(address _spender, uint256 _value) returns (bool success) {
        allowed[msg.sender][_spender] = _value;
        Approval(msg.sender, _spender, _value);
        return true;
    }

    function allowance(address _owner, address _spender) constant returns (uint256 remaining) {
      return allowed[_owner][_spender];
    }

    mapping (address => uint256) balances;
    mapping (address => mapping (address => uint256)) allowed;
}

contract BAToken is StandardToken, SafeMath {

    // metadata
    string public constant name = "Basic Attention Token";
    string public constant symbol = "BAT";
    uint256 public constant decimals = 18;
    string public version = "1.0";

    // contracts
    address public ethFundDeposit;      // deposit address for ETH for Brave International
    address public batFundDeposit;      // deposit address for Brave International use and BAT User Fund

    // crowdsale parameters
    bool public isFinalized;              // switched to true in operational state
    uint256 public fundingStartBlock;
    uint256 public fundingEndBlock;
    uint256 public constant batFund = 500 * (10**6) * 10**decimals;   // 500m BAT reserved for Brave Intl use
    uint256 public constant tokenExchangeRate = 6400; // 6400 BAT tokens per 1 ETH
    uint256 public constant tokenCreationCap =  1500 * (10**6) * 10**decimals;
    uint256 public constant tokenCreationMin =  675 * (10**6) * 10**decimals;


    // events
    event LogRefund(address indexed _to, uint256 _value);
    event CreateBAT(address indexed _to, uint256 _value);

    // constructor
    function BAToken(
        address _ethFundDeposit,
        address _batFundDeposit,
        uint256 _fundingStartBlock,
        uint256 _fundingEndBlock)
    {
      isFinalized = false;                   //controls pre through crowdsale state
      ethFundDeposit = _ethFundDeposit;
      batFundDeposit = _batFundDeposit;
      fundingStartBlock = _fundingStartBlock;
      fundingEndBlock = _fundingEndBlock;
      totalSupply = batFund;
      balances[batFundDeposit] = batFund;    // Deposit Brave Intl share
      CreateBAT(batFundDeposit, batFund);  // logs Brave Intl fund
    }

    /// @dev Accepts ether and creates new BAT tokens.
    function createTokens() payable external {
      if (isFinalized) throw;
      if (block.number < fundingStartBlock) throw;
      if (block.number > fundingEndBlock) throw;
      if (msg.value == 0) throw;

      uint256 tokens = safeMult(msg.value, tokenExchangeRate); // check that we're not over totals
      uint256 checkedSupply = safeAdd(totalSupply, tokens);

      // return money if something goes wrong
      if (tokenCreationCap < checkedSupply) throw;  // odd fractions won't be found

      totalSupply = checkedSupply;
      balances[msg.sender] += tokens;  // safeAdd not needed; bad semantics to use here
      CreateBAT(msg.sender, tokens);  // logs token creation
    }

    /// @dev Ends the funding period and sends the ETH home
    function finalize() external {
      if (isFinalized) throw;
      if (msg.sender != ethFundDeposit) throw; // locks finalize to the ultimate ETH owner
      if(totalSupply < tokenCreationMin) throw;      // have to sell minimum to move to operational
      if(block.number <= fundingEndBlock && totalSupply != tokenCreationCap) throw;
      // move to operational
      isFinalized = true;
      if(!ethFundDeposit.send(this.balance)) throw;  // send the eth to Brave International
    }

    /// @dev Allows contributors to recover their ether in the case of a failed funding campaign.
    function refund() external {
      if(isFinalized) throw;                       // prevents refund if operational
      if (block.number <= fundingEndBlock) throw; // prevents refund until sale period is over
      if(totalSupply >= tokenCreationMin) throw;  // no refunds if we sold enough
      if(msg.sender == batFundDeposit) throw;    // Brave Intl not entitled to a refund
      uint256 batVal = balances[msg.sender];
      if (batVal == 0) throw;
      balances[msg.sender] = 0;
      totalSupply = safeSubtract(totalSupply, batVal); // extra safe
      uint256 ethVal = batVal / tokenExchangeRate;     // should be safe; previous throws covers edges
      LogRefund(msg.sender, ethVal);               // log it 
      if (!msg.sender.send(ethVal)) throw;       // if you're using a contract; make sure it works with .send gas limits
    }

}

# @title Uniswap Exchange Interface V1
# @notice Source code found at https://github.com/uniswap
# @notice Use at your own risk

contract Factory():
    def getExchange(token_addr: address) -> address: constant

contract Exchange():
    def getEthToTokenOutputPrice(tokens_bought: uint256) -> uint256(wei): constant
    def ethToTokenTransferInput(min_tokens: uint256, deadline: timestamp, recipient: address) -> uint256: modifying
    def ethToTokenTransferOutput(tokens_bought: uint256, deadline: timestamp, recipient: address) -> uint256(wei): modifying

TokenPurchase: event({buyer: indexed(address), eth_sold: indexed(uint256(wei)), tokens_bought: indexed(uint256)})
EthPurchase: event({buyer: indexed(address), tokens_sold: indexed(uint256), eth_bought: indexed(uint256(wei))})
AddLiquidity: event({provider: indexed(address), eth_amount: indexed(uint256(wei)), token_amount: indexed(uint256)})
RemoveLiquidity: event({provider: indexed(address), eth_amount: indexed(uint256(wei)), token_amount: indexed(uint256)})
Transfer: event({_from: indexed(address), _to: indexed(address), _value: uint256})
Approval: event({_owner: indexed(address), _spender: indexed(address), _value: uint256})

name: public(bytes32)                             # Uniswap V1
symbol: public(bytes32)                           # UNI-V1
decimals: public(uint256)                         # 18
totalSupply: public(uint256)                      # total number of UNI in existence
balances: uint256[address]                        # UNI balance of an address
allowances: (uint256[address])[address]           # UNI allowance of one address on another
token: address(ERC20)                             # address of the ERC20 token traded on this contract
factory: Factory                                  # interface for the factory that created this contract

# @dev This function acts as a contract constructor which is not currently supported in contracts deployed
#      using create_with_code_of(). It is called once by the factory during contract creation.
@public
def setup(token_addr: address):
    assert (self.factory == ZERO_ADDRESS and self.token == ZERO_ADDRESS) and token_addr != ZERO_ADDRESS
    self.factory = msg.sender
    self.token = token_addr
    self.name = 0x556e697377617020563100000000000000000000000000000000000000000000
    self.symbol = 0x554e492d56310000000000000000000000000000000000000000000000000000
    self.decimals = 18

# @notice Deposit ETH and Tokens (self.token) at current ratio to mint UNI tokens.
# @dev min_liquidity does nothing when total UNI supply is 0.
# @param min_liquidity Minimum number of UNI sender will mint if total UNI supply is greater than 0.
# @param max_tokens Maximum number of tokens deposited. Deposits max amount if total UNI supply is 0.
# @param deadline Time after which this transaction can no longer be executed.
# @return The amount of UNI minted.
@public
@payable
def addLiquidity(min_liquidity: uint256, max_tokens: uint256, deadline: timestamp) -> uint256:
    assert deadline > block.timestamp and (max_tokens > 0 and msg.value > 0)
    total_liquidity: uint256 = self.totalSupply
    if total_liquidity > 0:
        assert min_liquidity > 0
        eth_reserve: uint256(wei) = self.balance - msg.value
        token_reserve: uint256 = self.token.balanceOf(self)
        token_amount: uint256 = msg.value * token_reserve / eth_reserve + 1
        liquidity_minted: uint256 = msg.value * total_liquidity / eth_reserve
        assert max_tokens >= token_amount and liquidity_minted >= min_liquidity
        self.balances[msg.sender] += liquidity_minted
        self.totalSupply = total_liquidity + liquidity_minted
        assert self.token.transferFrom(msg.sender, self, token_amount)
        log.AddLiquidity(msg.sender, msg.value, token_amount)
        log.Transfer(ZERO_ADDRESS, msg.sender, liquidity_minted)
        return liquidity_minted
    else:
        assert (self.factory != ZERO_ADDRESS and self.token != ZERO_ADDRESS) and msg.value >= 1000000000
        assert self.factory.getExchange(self.token) == self
        token_amount: uint256 = max_tokens
        initial_liquidity: uint256 = as_unitless_number(self.balance)
        self.totalSupply = initial_liquidity
        self.balances[msg.sender] = initial_liquidity
        assert self.token.transferFrom(msg.sender, self, token_amount)
        log.AddLiquidity(msg.sender, msg.value, token_amount)
        log.Transfer(ZERO_ADDRESS, msg.sender, initial_liquidity)
        return initial_liquidity

# @dev Burn UNI tokens to withdraw ETH and Tokens at current ratio.
# @param amount Amount of UNI burned.
# @param min_eth Minimum ETH withdrawn.
# @param min_tokens Minimum Tokens withdrawn.
# @param deadline Time after which this transaction can no longer be executed.
# @return The amount of ETH and Tokens withdrawn.
@public
def removeLiquidity(amount: uint256, min_eth: uint256(wei), min_tokens: uint256, deadline: timestamp) -> (uint256(wei), uint256):
    assert (amount > 0 and deadline > block.timestamp) and (min_eth > 0 and min_tokens > 0)
    total_liquidity: uint256 = self.totalSupply
    assert total_liquidity > 0
    token_reserve: uint256 = self.token.balanceOf(self)
    eth_amount: uint256(wei) = amount * self.balance / total_liquidity
    token_amount: uint256 = amount * token_reserve / total_liquidity
    assert eth_amount >= min_eth and token_amount >= min_tokens
    self.balances[msg.sender] -= amount
    self.totalSupply = total_liquidity - amount
    send(msg.sender, eth_amount)
    assert self.token.transfer(msg.sender, token_amount)
    log.RemoveLiquidity(msg.sender, eth_amount, token_amount)
    log.Transfer(msg.sender, ZERO_ADDRESS, amount)
    return eth_amount, token_amount

# @dev Pricing function for converting between ETH and Tokens.
# @param input_amount Amount of ETH or Tokens being sold.
# @param input_reserve Amount of ETH or Tokens (input type) in exchange reserves.
# @param output_reserve Amount of ETH or Tokens (output type) in exchange reserves.
# @return Amount of ETH or Tokens bought.
@private
@constant
def getInputPrice(input_amount: uint256, input_reserve: uint256, output_reserve: uint256) -> uint256:
    assert input_reserve > 0 and output_reserve > 0
    input_amount_with_fee: uint256 = input_amount * 997
    numerator: uint256 = input_amount_with_fee * output_reserve
    denominator: uint256 = (input_reserve * 1000) + input_amount_with_fee
    return numerator / denominator

# @dev Pricing function for converting between ETH and Tokens.
# @param output_amount Amount of ETH or Tokens being bought.
# @param input_reserve Amount of ETH or Tokens (input type) in exchange reserves.
# @param output_reserve Amount of ETH or Tokens (output type) in exchange reserves.
# @return Amount of ETH or Tokens sold.
@private
@constant
def getOutputPrice(output_amount: uint256, input_reserve: uint256, output_reserve: uint256) -> uint256:
    assert input_reserve > 0 and output_reserve > 0
    numerator: uint256 = input_reserve * output_amount * 1000
    denominator: uint256 = (output_reserve - output_amount) * 997
    return numerator / denominator + 1

@private
def ethToTokenInput(eth_sold: uint256(wei), min_tokens: uint256, deadline: timestamp, buyer: address, recipient: address) -> uint256:
    assert deadline >= block.timestamp and (eth_sold > 0 and min_tokens > 0)
    token_reserve: uint256 = self.token.balanceOf(self)
    tokens_bought: uint256 = self.getInputPrice(as_unitless_number(eth_sold), as_unitless_number(self.balance - eth_sold), token_reserve)
    assert tokens_bought >= min_tokens
    assert self.token.transfer(recipient, tokens_bought)
    log.TokenPurchase(buyer, eth_sold, tokens_bought)
    return tokens_bought

# @notice Convert ETH to Tokens.
# @dev User specifies exact input (msg.value).
# @dev User cannot specify minimum output or deadline.
@public
@payable
def __default__():
    self.ethToTokenInput(msg.value, 1, block.timestamp, msg.sender, msg.sender)

# @notice Convert ETH to Tokens.
# @dev User specifies exact input (msg.value) and minimum output.
# @param min_tokens Minimum Tokens bought.
# @param deadline Time after which this transaction can no longer be executed.
# @return Amount of Tokens bought.
@public
@payable
def ethToTokenSwapInput(min_tokens: uint256, deadline: timestamp) -> uint256:
    return self.ethToTokenInput(msg.value, min_tokens, deadline, msg.sender, msg.sender)

# @notice Convert ETH to Tokens and transfers Tokens to recipient.
# @dev User specifies exact input (msg.value) and minimum output
# @param min_tokens Minimum Tokens bought.
# @param deadline Time after which this transaction can no longer be executed.
# @param recipient The address that receives output Tokens.
# @return Amount of Tokens bought.
@public
@payable
def ethToTokenTransferInput(min_tokens: uint256, deadline: timestamp, recipient: address) -> uint256:
    assert recipient != self and recipient != ZERO_ADDRESS
    return self.ethToTokenInput(msg.value, min_tokens, deadline, msg.sender, recipient)

@private
def ethToTokenOutput(tokens_bought: uint256, max_eth: uint256(wei), deadline: timestamp, buyer: address, recipient: address) -> uint256(wei):
    assert deadline >= block.timestamp and (tokens_bought > 0 and max_eth > 0)
    token_reserve: uint256 = self.token.balanceOf(self)
    eth_sold: uint256 = self.getOutputPrice(tokens_bought, as_unitless_number(self.balance - max_eth), token_reserve)
    # Throws if eth_sold > max_eth
    eth_refund: uint256(wei) = max_eth - as_wei_value(eth_sold, 'wei')
    if eth_refund > 0:
        send(buyer, eth_refund)
    assert self.token.transfer(recipient, tokens_bought)
    log.TokenPurchase(buyer, as_wei_value(eth_sold, 'wei'), tokens_bought)
    return as_wei_value(eth_sold, 'wei')

# @notice Convert ETH to Tokens.
# @dev User specifies maximum input (msg.value) and exact output.
# @param tokens_bought Amount of tokens bought.
# @param deadline Time after which this transaction can no longer be executed.
# @return Amount of ETH sold.
@public
@payable
def ethToTokenSwapOutput(tokens_bought: uint256, deadline: timestamp) -> uint256(wei):
    return self.ethToTokenOutput(tokens_bought, msg.value, deadline, msg.sender, msg.sender)

# @notice Convert ETH to Tokens and transfers Tokens to recipient.
# @dev User specifies maximum input (msg.value) and exact output.
# @param tokens_bought Amount of tokens bought.
# @param deadline Time after which this transaction can no longer be executed.
# @param recipient The address that receives output Tokens.
# @return Amount of ETH sold.
@public
@payable
def ethToTokenTransferOutput(tokens_bought: uint256, deadline: timestamp, recipient: address) -> uint256(wei):
    assert recipient != self and recipient != ZERO_ADDRESS
    return self.ethToTokenOutput(tokens_bought, msg.value, deadline, msg.sender, recipient)

@private
def tokenToEthInput(tokens_sold: uint256, min_eth: uint256(wei), deadline: timestamp, buyer: address, recipient: address) -> uint256(wei):
    assert deadline >= block.timestamp and (tokens_sold > 0 and min_eth > 0)
    token_reserve: uint256 = self.token.balanceOf(self)
    eth_bought: uint256 = self.getInputPrice(tokens_sold, token_reserve, as_unitless_number(self.balance))
    wei_bought: uint256(wei) = as_wei_value(eth_bought, 'wei')
    assert wei_bought >= min_eth
    send(recipient, wei_bought)
    assert self.token.transferFrom(buyer, self, tokens_sold)
    log.EthPurchase(buyer, tokens_sold, wei_bought)
    return wei_bought


# @notice Convert Tokens to ETH.
# @dev User specifies exact input and minimum output.
# @param tokens_sold Amount of Tokens sold.
# @param min_eth Minimum ETH purchased.
# @param deadline Time after which this transaction can no longer be executed.
# @return Amount of ETH bought.
@public
def tokenToEthSwapInput(tokens_sold: uint256, min_eth: uint256(wei), deadline: timestamp) -> uint256(wei):
    return self.tokenToEthInput(tokens_sold, min_eth, deadline, msg.sender, msg.sender)

# @notice Convert Tokens to ETH and transfers ETH to recipient.
# @dev User specifies exact input and minimum output.
# @param tokens_sold Amount of Tokens sold.
# @param min_eth Minimum ETH purchased.
# @param deadline Time after which this transaction can no longer be executed.
# @param recipient The address that receives output ETH.
# @return Amount of ETH bought.
@public
def tokenToEthTransferInput(tokens_sold: uint256, min_eth: uint256(wei), deadline: timestamp, recipient: address) -> uint256(wei):
    assert recipient != self and recipient != ZERO_ADDRESS
    return self.tokenToEthInput(tokens_sold, min_eth, deadline, msg.sender, recipient)

@private
def tokenToEthOutput(eth_bought: uint256(wei), max_tokens: uint256, deadline: timestamp, buyer: address, recipient: address) -> uint256:
    assert deadline >= block.timestamp and eth_bought > 0
    token_reserve: uint256 = self.token.balanceOf(self)
    tokens_sold: uint256 = self.getOutputPrice(as_unitless_number(eth_bought), token_reserve, as_unitless_number(self.balance))
    # tokens sold is always > 0
    assert max_tokens >= tokens_sold
    send(recipient, eth_bought)
    assert self.token.transferFrom(buyer, self, tokens_sold)
    log.EthPurchase(buyer, tokens_sold, eth_bought)
    return tokens_sold

# @notice Convert Tokens to ETH.
# @dev User specifies maximum input and exact output.
# @param eth_bought Amount of ETH purchased.
# @param max_tokens Maximum Tokens sold.
# @param deadline Time after which this transaction can no longer be executed.
# @return Amount of Tokens sold.
@public
def tokenToEthSwapOutput(eth_bought: uint256(wei), max_tokens: uint256, deadline: timestamp) -> uint256:
    return self.tokenToEthOutput(eth_bought, max_tokens, deadline, msg.sender, msg.sender)

# @notice Convert Tokens to ETH and transfers ETH to recipient.
# @dev User specifies maximum input and exact output.
# @param eth_bought Amount of ETH purchased.
# @param max_tokens Maximum Tokens sold.
# @param deadline Time after which this transaction can no longer be executed.
# @param recipient The address that receives output ETH.
# @return Amount of Tokens sold.
@public
def tokenToEthTransferOutput(eth_bought: uint256(wei), max_tokens: uint256, deadline: timestamp, recipient: address) -> uint256:
    assert recipient != self and recipient != ZERO_ADDRESS
    return self.tokenToEthOutput(eth_bought, max_tokens, deadline, msg.sender, recipient)

@private
def tokenToTokenInput(tokens_sold: uint256, min_tokens_bought: uint256, min_eth_bought: uint256(wei), deadline: timestamp, buyer: address, recipient: address, exchange_addr: address) -> uint256:
    assert (deadline >= block.timestamp and tokens_sold > 0) and (min_tokens_bought > 0 and min_eth_bought > 0)
    assert exchange_addr != self and exchange_addr != ZERO_ADDRESS
    token_reserve: uint256 = self.token.balanceOf(self)
    eth_bought: uint256 = self.getInputPrice(tokens_sold, token_reserve, as_unitless_number(self.balance))
    wei_bought: uint256(wei) = as_wei_value(eth_bought, 'wei')
    assert wei_bought >= min_eth_bought
    assert self.token.transferFrom(buyer, self, tokens_sold)
    tokens_bought: uint256 = Exchange(exchange_addr).ethToTokenTransferInput(min_tokens_bought, deadline, recipient, value=wei_bought)
    log.EthPurchase(buyer, tokens_sold, wei_bought)
    return tokens_bought

# @notice Convert Tokens (self.token) to Tokens (token_addr).
# @dev User specifies exact input and minimum output.
# @param tokens_sold Amount of Tokens sold.
# @param min_tokens_bought Minimum Tokens (token_addr) purchased.
# @param min_eth_bought Minimum ETH purchased as intermediary.
# @param deadline Time after which this transaction can no longer be executed.
# @param token_addr The address of the token being purchased.
# @return Amount of Tokens (token_addr) bought.
@public
def tokenToTokenSwapInput(tokens_sold: uint256, min_tokens_bought: uint256, min_eth_bought: uint256(wei), deadline: timestamp, token_addr: address) -> uint256:
    exchange_addr: address = self.factory.getExchange(token_addr)
    return self.tokenToTokenInput(tokens_sold, min_tokens_bought, min_eth_bought, deadline, msg.sender, msg.sender, exchange_addr)

# @notice Convert Tokens (self.token) to Tokens (token_addr) and transfers
#         Tokens (token_addr) to recipient.
# @dev User specifies exact input and minimum output.
# @param tokens_sold Amount of Tokens sold.
# @param min_tokens_bought Minimum Tokens (token_addr) purchased.
# @param min_eth_bought Minimum ETH purchased as intermediary.
# @param deadline Time after which this transaction can no longer be executed.
# @param recipient The address that receives output ETH.
# @param token_addr The address of the token being purchased.
# @return Amount of Tokens (token_addr) bought.
@public
def tokenToTokenTransferInput(tokens_sold: uint256, min_tokens_bought: uint256, min_eth_bought: uint256(wei), deadline: timestamp, recipient: address, token_addr: address) -> uint256:
    exchange_addr: address = self.factory.getExchange(token_addr)
    return self.tokenToTokenInput(tokens_sold, min_tokens_bought, min_eth_bought, deadline, msg.sender, recipient, exchange_addr)

@private
def tokenToTokenOutput(tokens_bought: uint256, max_tokens_sold: uint256, max_eth_sold: uint256(wei), deadline: timestamp, buyer: address, recipient: address, exchange_addr: address) -> uint256:
    assert deadline >= block.timestamp and (tokens_bought > 0 and max_eth_sold > 0)
    assert exchange_addr != self and exchange_addr != ZERO_ADDRESS
    eth_bought: uint256(wei) = Exchange(exchange_addr).getEthToTokenOutputPrice(tokens_bought)
    token_reserve: uint256 = self.token.balanceOf(self)
    tokens_sold: uint256 = self.getOutputPrice(as_unitless_number(eth_bought), token_reserve, as_unitless_number(self.balance))
    # tokens sold is always > 0
    assert max_tokens_sold >= tokens_sold and max_eth_sold >= eth_bought
    assert self.token.transferFrom(buyer, self, tokens_sold)
    eth_sold: uint256(wei) = Exchange(exchange_addr).ethToTokenTransferOutput(tokens_bought, deadline, recipient, value=eth_bought)
    log.EthPurchase(buyer, tokens_sold, eth_bought)
    return tokens_sold

# @notice Convert Tokens (self.token) to Tokens (token_addr).
# @dev User specifies maximum input and exact output.
# @param tokens_bought Amount of Tokens (token_addr) bought.
# @param max_tokens_sold Maximum Tokens (self.token) sold.
# @param max_eth_sold Maximum ETH purchased as intermediary.
# @param deadline Time after which this transaction can no longer be executed.
# @param token_addr The address of the token being purchased.
# @return Amount of Tokens (self.token) sold.
@public
def tokenToTokenSwapOutput(tokens_bought: uint256, max_tokens_sold: uint256, max_eth_sold: uint256(wei), deadline: timestamp, token_addr: address) -> uint256:
    exchange_addr: address = self.factory.getExchange(token_addr)
    return self.tokenToTokenOutput(tokens_bought, max_tokens_sold, max_eth_sold, deadline, msg.sender, msg.sender, exchange_addr)

# @notice Convert Tokens (self.token) to Tokens (token_addr) and transfers
#         Tokens (token_addr) to recipient.
# @dev User specifies maximum input and exact output.
# @param tokens_bought Amount of Tokens (token_addr) bought.
# @param max_tokens_sold Maximum Tokens (self.token) sold.
# @param max_eth_sold Maximum ETH purchased as intermediary.
# @param deadline Time after which this transaction can no longer be executed.
# @param recipient The address that receives output ETH.
# @param token_addr The address of the token being purchased.
# @return Amount of Tokens (self.token) sold.
@public
def tokenToTokenTransferOutput(tokens_bought: uint256, max_tokens_sold: uint256, max_eth_sold: uint256(wei), deadline: timestamp, recipient: address, token_addr: address) -> uint256:
    exchange_addr: address = self.factory.getExchange(token_addr)
    return self.tokenToTokenOutput(tokens_bought, max_tokens_sold, max_eth_sold, deadline, msg.sender, recipient, exchange_addr)

# @notice Convert Tokens (self.token) to Tokens (exchange_addr.token).
# @dev Allows trades through contracts that were not deployed from the same factory.
# @dev User specifies exact input and minimum output.
# @param tokens_sold Amount of Tokens sold.
# @param min_tokens_bought Minimum Tokens (token_addr) purchased.
# @param min_eth_bought Minimum ETH purchased as intermediary.
# @param deadline Time after which this transaction can no longer be executed.
# @param exchange_addr The address of the exchange for the token being purchased.
# @return Amount of Tokens (exchange_addr.token) bought.
@public
def tokenToExchangeSwapInput(tokens_sold: uint256, min_tokens_bought: uint256, min_eth_bought: uint256(wei), deadline: timestamp, exchange_addr: address) -> uint256:
    return self.tokenToTokenInput(tokens_sold, min_tokens_bought, min_eth_bought, deadline, msg.sender, msg.sender, exchange_addr)

# @notice Convert Tokens (self.token) to Tokens (exchange_addr.token) and transfers
#         Tokens (exchange_addr.token) to recipient.
# @dev Allows trades through contracts that were not deployed from the same factory.
# @dev User specifies exact input and minimum output.
# @param tokens_sold Amount of Tokens sold.
# @param min_tokens_bought Minimum Tokens (token_addr) purchased.
# @param min_eth_bought Minimum ETH purchased as intermediary.
# @param deadline Time after which this transaction can no longer be executed.
# @param recipient The address that receives output ETH.
# @param exchange_addr The address of the exchange for the token being purchased.
# @return Amount of Tokens (exchange_addr.token) bought.
@public
def tokenToExchangeTransferInput(tokens_sold: uint256, min_tokens_bought: uint256, min_eth_bought: uint256(wei), deadline: timestamp, recipient: address, exchange_addr: address) -> uint256:
    assert recipient != self
    return self.tokenToTokenInput(tokens_sold, min_tokens_bought, min_eth_bought, deadline, msg.sender, recipient, exchange_addr)

# @notice Convert Tokens (self.token) to Tokens (exchange_addr.token).
# @dev Allows trades through contracts that were not deployed from the same factory.
# @dev User specifies maximum input and exact output.
# @param tokens_bought Amount of Tokens (token_addr) bought.
# @param max_tokens_sold Maximum Tokens (self.token) sold.
# @param max_eth_sold Maximum ETH purchased as intermediary.
# @param deadline Time after which this transaction can no longer be executed.
# @param exchange_addr The address of the exchange for the token being purchased.
# @return Amount of Tokens (self.token) sold.
@public
def tokenToExchangeSwapOutput(tokens_bought: uint256, max_tokens_sold: uint256, max_eth_sold: uint256(wei), deadline: timestamp, exchange_addr: address) -> uint256:
    return self.tokenToTokenOutput(tokens_bought, max_tokens_sold, max_eth_sold, deadline, msg.sender, msg.sender, exchange_addr)

# @notice Convert Tokens (self.token) to Tokens (exchange_addr.token) and transfers
#         Tokens (exchange_addr.token) to recipient.
# @dev Allows trades through contracts that were not deployed from the same factory.
# @dev User specifies maximum input and exact output.
# @param tokens_bought Amount of Tokens (token_addr) bought.
# @param max_tokens_sold Maximum Tokens (self.token) sold.
# @param max_eth_sold Maximum ETH purchased as intermediary.
# @param deadline Time after which this transaction can no longer be executed.
# @param recipient The address that receives output ETH.
# @param token_addr The address of the token being purchased.
# @return Amount of Tokens (self.token) sold.
@public
def tokenToExchangeTransferOutput(tokens_bought: uint256, max_tokens_sold: uint256, max_eth_sold: uint256(wei), deadline: timestamp, recipient: address, exchange_addr: address) -> uint256:
    assert recipient != self
    return self.tokenToTokenOutput(tokens_bought, max_tokens_sold, max_eth_sold, deadline, msg.sender, recipient, exchange_addr)

# @notice Public price function for ETH to Token trades with an exact input.
# @param eth_sold Amount of ETH sold.
# @return Amount of Tokens that can be bought with input ETH.
@public
@constant
def getEthToTokenInputPrice(eth_sold: uint256(wei)) -> uint256:
    assert eth_sold > 0
    token_reserve: uint256 = self.token.balanceOf(self)
    return self.getInputPrice(as_unitless_number(eth_sold), as_unitless_number(self.balance), token_reserve)

# @notice Public price function for ETH to Token trades with an exact output.
# @param tokens_bought Amount of Tokens bought.
# @return Amount of ETH needed to buy output Tokens.
@public
@constant
def getEthToTokenOutputPrice(tokens_bought: uint256) -> uint256(wei):
    assert tokens_bought > 0
    token_reserve: uint256 = self.token.balanceOf(self)
    eth_sold: uint256 = self.getOutputPrice(tokens_bought, as_unitless_number(self.balance), token_reserve)
    return as_wei_value(eth_sold, 'wei')

# @notice Public price function for Token to ETH trades with an exact input.
# @param tokens_sold Amount of Tokens sold.
# @return Amount of ETH that can be bought with input Tokens.
@public
@constant
def getTokenToEthInputPrice(tokens_sold: uint256) -> uint256(wei):
    assert tokens_sold > 0
    token_reserve: uint256 = self.token.balanceOf(self)
    eth_bought: uint256 = self.getInputPrice(tokens_sold, token_reserve, as_unitless_number(self.balance))
    return as_wei_value(eth_bought, 'wei')

# @notice Public price function for Token to ETH trades with an exact output.
# @param eth_bought Amount of output ETH.
# @return Amount of Tokens needed to buy output ETH.
@public
@constant
def getTokenToEthOutputPrice(eth_bought: uint256(wei)) -> uint256:
    assert eth_bought > 0
    token_reserve: uint256 = self.token.balanceOf(self)
    return self.getOutputPrice(as_unitless_number(eth_bought), token_reserve, as_unitless_number(self.balance))

# @return Address of Token that is sold on this exchange.
@public
@constant
def tokenAddress() -> address:
    return self.token

# @return Address of factory that created this exchange.
@public
@constant
def factoryAddress() -> address(Factory):
    return self.factory

# ERC20 compatibility for exchange liquidity modified from
# https://github.com/ethereum/vyper/blob/master/examples/tokens/ERC20.vy
@public
@constant
def balanceOf(_owner : address) -> uint256:
    return self.balances[_owner]

@public
def transfer(_to : address, _value : uint256) -> bool:
    self.balances[msg.sender] -= _value
    self.balances[_to] += _value
    log.Transfer(msg.sender, _to, _value)
    return True

@public
def transferFrom(_from : address, _to : address, _value : uint256) -> bool:
    self.balances[_from] -= _value
    self.balances[_to] += _value
    self.allowances[_from][msg.sender] -= _value
    log.Transfer(_from, _to, _value)
    return True

@public
def approve(_spender : address, _value : uint256) -> bool:
    self.allowances[msg.sender][_spender] = _value
    log.Approval(msg.sender, _spender, _value)
    return True

@public
@constant
def allowance(_owner : address, _spender : address) -> uint256:
    return self.allowances[_owner][_spender]

// Copyright (C) 2015, 2016, 2017 Dapphub

// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.

// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.

// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.

pragma solidity ^0.4.18;

contract WETH9 {
    string public name     = "Wrapped Ether";
    string public symbol   = "WETH";
    uint8  public decimals = 18;

    event  Approval(address indexed src, address indexed guy, uint wad);
    event  Transfer(address indexed src, address indexed dst, uint wad);
    event  Deposit(address indexed dst, uint wad);
    event  Withdrawal(address indexed src, uint wad);

    mapping (address => uint)                       public  balanceOf;
    mapping (address => mapping (address => uint))  public  allowance;

    function() public payable {
        deposit();
    }
    function deposit() public payable {
        balanceOf[msg.sender] += msg.value;
        Deposit(msg.sender, msg.value);
    }
    function withdraw(uint wad) public {
        require(balanceOf[msg.sender] >= wad);
        balanceOf[msg.sender] -= wad;
        msg.sender.transfer(wad);
        Withdrawal(msg.sender, wad);
    }

    function totalSupply() public view returns (uint) {
        return this.balance;
    }

    function approve(address guy, uint wad) public returns (bool) {
        allowance[msg.sender][guy] = wad;
        Approval(msg.sender, guy, wad);
        return true;
    }

    function transfer(address dst, uint wad) public returns (bool) {
        return transferFrom(msg.sender, dst, wad);
    }

    function transferFrom(address src, address dst, uint wad)
        public
        returns (bool)
    {
        require(balanceOf[src] >= wad);

        if (src != msg.sender && allowance[src][msg.sender] != uint(-1)) {
            require(allowance[src][msg.sender] >= wad);
            allowance[src][msg.sender] -= wad;
        }

        balanceOf[src] -= wad;
        balanceOf[dst] += wad;

        Transfer(src, dst, wad);

        return true;
    }
}


/*
                    GNU GENERAL PUBLIC LICENSE
                       Version 3, 29 June 2007

 Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
 Everyone is permitted to copy and distribute verbatim copies
 of this license document, but changing it is not allowed.

                            Preamble

  The GNU General Public License is a free, copyleft license for
software and other kinds of works.

  The licenses for most software and other practical works are designed
to take away your freedom to share and change the works.  By contrast,
the GNU General Public License is intended to guarantee your freedom to
share and change all versions of a program--to make sure it remains free
software for all its users.  We, the Free Software Foundation, use the
GNU General Public License for most of our software; it applies also to
any other work released this way by its authors.  You can apply it to
your programs, too.

  When we speak of free software, we are referring to freedom, not
price.  Our General Public Licenses are designed to make sure that you
have the freedom to distribute copies of free software (and charge for
them if you wish), that you receive source code or can get it if you
want it, that you can change the software or use pieces of it in new
free programs, and that you know you can do these things.

  To protect your rights, we need to prevent others from denying you
these rights or asking you to surrender the rights.  Therefore, you have
certain responsibilities if you distribute copies of the software, or if
you modify it: responsibilities to respect the freedom of others.

  For example, if you distribute copies of such a program, whether
gratis or for a fee, you must pass on to the recipients the same
freedoms that you received.  You must make sure that they, too, receive
or can get the source code.  And you must show them these terms so they
know their rights.

  Developers that use the GNU GPL protect your rights with two steps:
(1) assert copyright on the software, and (2) offer you this License
giving you legal permission to copy, distribute and/or modify it.

  For the developers' and authors' protection, the GPL clearly explains
that there is no warranty for this free software.  For both users' and
authors' sake, the GPL requires that modified versions be marked as
changed, so that their problems will not be attributed erroneously to
authors of previous versions.

  Some devices are designed to deny users access to install or run
modified versions of the software inside them, although the manufacturer
can do so.  This is fundamentally incompatible with the aim of
protecting users' freedom to change the software.  The systematic
pattern of such abuse occurs in the area of products for individuals to
use, which is precisely where it is most unacceptable.  Therefore, we
have designed this version of the GPL to prohibit the practice for those
products.  If such problems arise substantially in other domains, we
stand ready to extend this provision to those domains in future versions
of the GPL, as needed to protect the freedom of users.

  Finally, every program is threatened constantly by software patents.
States should not allow patents to restrict development and use of
software on general-purpose computers, but in those that do, we wish to
avoid the special danger that patents applied to a free program could
make it effectively proprietary.  To prevent this, the GPL assures that
patents cannot be used to render the program non-free.

  The precise terms and conditions for copying, distribution and
modification follow.

                       TERMS AND CONDITIONS

  0. Definitions.

  "This License" refers to version 3 of the GNU General Public License.

  "Copyright" also means copyright-like laws that apply to other kinds of
works, such as semiconductor masks.

  "The Program" refers to any copyrightable work licensed under this
License.  Each licensee is addressed as "you".  "Licensees" and
"recipients" may be individuals or organizations.

  To "modify" a work means to copy from or adapt all or part of the work
in a fashion requiring copyright permission, other than the making of an
exact copy.  The resulting work is called a "modified version" of the
earlier work or a work "based on" the earlier work.

  A "covered work" means either the unmodified Program or a work based
on the Program.

  To "propagate" a work means to do anything with it that, without
permission, would make you directly or secondarily liable for
infringement under applicable copyright law, except executing it on a
computer or modifying a private copy.  Propagation includes copying,
distribution (with or without modification), making available to the
public, and in some countries other activities as well.

  To "convey" a work means any kind of propagation that enables other
parties to make or receive copies.  Mere interaction with a user through
a computer network, with no transfer of a copy, is not conveying.

  An interactive user interface displays "Appropriate Legal Notices"
to the extent that it includes a convenient and prominently visible
feature that (1) displays an appropriate copyright notice, and (2)
tells the user that there is no warranty for the work (except to the
extent that warranties are provided), that licensees may convey the
work under this License, and how to view a copy of this License.  If
the interface presents a list of user commands or options, such as a
menu, a prominent item in the list meets this criterion.

  1. Source Code.

  The "source code" for a work means the preferred form of the work
for making modifications to it.  "Object code" means any non-source
form of a work.

  A "Standard Interface" means an interface that either is an official
standard defined by a recognized standards body, or, in the case of
interfaces specified for a particular programming language, one that
is widely used among developers working in that language.

  The "System Libraries" of an executable work include anything, other
than the work as a whole, that (a) is included in the normal form of
packaging a Major Component, but which is not part of that Major
Component, and (b) serves only to enable use of the work with that
Major Component, or to implement a Standard Interface for which an
implementation is available to the public in source code form.  A
"Major Component", in this context, means a major essential component
(kernel, window system, and so on) of the specific operating system
(if any) on which the executable work runs, or a compiler used to
produce the work, or an object code interpreter used to run it.

  The "Corresponding Source" for a work in object code form means all
the source code needed to generate, install, and (for an executable
work) run the object code and to modify the work, including scripts to
control those activities.  However, it does not include the work's
System Libraries, or general-purpose tools or generally available free
programs which are used unmodified in performing those activities but
which are not part of the work.  For example, Corresponding Source
includes interface definition files associated with source files for
the work, and the source code for shared libraries and dynamically
linked subprograms that the work is specifically designed to require,
such as by intimate data communication or control flow between those
subprograms and other parts of the work.

  The Corresponding Source need not include anything that users
can regenerate automatically from other parts of the Corresponding
Source.

  The Corresponding Source for a work in source code form is that
same work.

  2. Basic Permissions.

  All rights granted under this License are granted for the term of
copyright on the Program, and are irrevocable provided the stated
conditions are met.  This License explicitly affirms your unlimited
permission to run the unmodified Program.  The output from running a
covered work is covered by this License only if the output, given its
content, constitutes a covered work.  This License acknowledges your
rights of fair use or other equivalent, as provided by copyright law.

  You may make, run and propagate covered works that you do not
convey, without conditions so long as your license otherwise remains
in force.  You may convey covered works to others for the sole purpose
of having them make modifications exclusively for you, or provide you
with facilities for running those works, provided that you comply with
the terms of this License in conveying all material for which you do
not control copyright.  Those thus making or running the covered works
for you must do so exclusively on your behalf, under your direction
and control, on terms that prohibit them from making any copies of
your copyrighted material outside their relationship with you.

  Conveying under any other circumstances is permitted solely under
the conditions stated below.  Sublicensing is not allowed; section 10
makes it unnecessary.

  3. Protecting Users' Legal Rights From Anti-Circumvention Law.

  No covered work shall be deemed part of an effective technological
measure under any applicable law fulfilling obligations under article
11 of the WIPO copyright treaty adopted on 20 December 1996, or
similar laws prohibiting or restricting circumvention of such
measures.

  When you convey a covered work, you waive any legal power to forbid
circumvention of technological measures to the extent such circumvention
is effected by exercising rights under this License with respect to
the covered work, and you disclaim any intention to limit operation or
modification of the work as a means of enforcing, against the work's
users, your or third parties' legal rights to forbid circumvention of
technological measures.

  4. Conveying Verbatim Copies.

  You may convey verbatim copies of the Program's source code as you
receive it, in any medium, provided that you conspicuously and
appropriately publish on each copy an appropriate copyright notice;
keep intact all notices stating that this License and any
non-permissive terms added in accord with section 7 apply to the code;
keep intact all notices of the absence of any warranty; and give all
recipients a copy of this License along with the Program.

  You may charge any price or no price for each copy that you convey,
and you may offer support or warranty protection for a fee.

  5. Conveying Modified Source Versions.

  You may convey a work based on the Program, or the modifications to
produce it from the Program, in the form of source code under the
terms of section 4, provided that you also meet all of these conditions:

    a) The work must carry prominent notices stating that you modified
    it, and giving a relevant date.

    b) The work must carry prominent notices stating that it is
    released under this License and any conditions added under section
    7.  This requirement modifies the requirement in section 4 to
    "keep intact all notices".

    c) You must license the entire work, as a whole, under this
    License to anyone who comes into possession of a copy.  This
    License will therefore apply, along with any applicable section 7
    additional terms, to the whole of the work, and all its parts,
    regardless of how they are packaged.  This License gives no
    permission to license the work in any other way, but it does not
    invalidate such permission if you have separately received it.

    d) If the work has interactive user interfaces, each must display
    Appropriate Legal Notices; however, if the Program has interactive
    interfaces that do not display Appropriate Legal Notices, your
    work need not make them do so.

  A compilation of a covered work with other separate and independent
works, which are not by their nature extensions of the covered work,
and which are not combined with it such as to form a larger program,
in or on a volume of a storage or distribution medium, is called an
"aggregate" if the compilation and its resulting copyright are not
used to limit the access or legal rights of the compilation's users
beyond what the individual works permit.  Inclusion of a covered work
in an aggregate does not cause this License to apply to the other
parts of the aggregate.

  6. Conveying Non-Source Forms.

  You may convey a covered work in object code form under the terms
of sections 4 and 5, provided that you also convey the
machine-readable Corresponding Source under the terms of this License,
in one of these ways:

    a) Convey the object code in, or embodied in, a physical product
    (including a physical distribution medium), accompanied by the
    Corresponding Source fixed on a durable physical medium
    customarily used for software interchange.

    b) Convey the object code in, or embodied in, a physical product
    (including a physical distribution medium), accompanied by a
    written offer, valid for at least three years and valid for as
    long as you offer spare parts or customer support for that product
    model, to give anyone who possesses the object code either (1) a
    copy of the Corresponding Source for all the software in the
    product that is covered by this License, on a durable physical
    medium customarily used for software interchange, for a price no
    more than your reasonable cost of physically performing this
    conveying of source, or (2) access to copy the
    Corresponding Source from a network server at no charge.

    c) Convey individual copies of the object code with a copy of the
    written offer to provide the Corresponding Source.  This
    alternative is allowed only occasionally and noncommercially, and
    only if you received the object code with such an offer, in accord
    with subsection 6b.

    d) Convey the object code by offering access from a designated
    place (gratis or for a charge), and offer equivalent access to the
    Corresponding Source in the same way through the same place at no
    further charge.  You need not require recipients to copy the
    Corresponding Source along with the object code.  If the place to
    copy the object code is a network server, the Corresponding Source
    may be on a different server (operated by you or a third party)
    that supports equivalent copying facilities, provided you maintain
    clear directions next to the object code saying where to find the
    Corresponding Source.  Regardless of what server hosts the
    Corresponding Source, you remain obligated to ensure that it is
    available for as long as needed to satisfy these requirements.

    e) Convey the object code using peer-to-peer transmission, provided
    you inform other peers where the object code and Corresponding
    Source of the work are being offered to the general public at no
    charge under subsection 6d.

  A separable portion of the object code, whose source code is excluded
from the Corresponding Source as a System Library, need not be
included in conveying the object code work.

  A "User Product" is either (1) a "consumer product", which means any
tangible personal property which is normally used for personal, family,
or household purposes, or (2) anything designed or sold for incorporation
into a dwelling.  In determining whether a product is a consumer product,
doubtful cases shall be resolved in favor of coverage.  For a particular
product received by a particular user, "normally used" refers to a
typical or common use of that class of product, regardless of the status
of the particular user or of the way in which the particular user
actually uses, or expects or is expected to use, the product.  A product
is a consumer product regardless of whether the product has substantial
commercial, industrial or non-consumer uses, unless such uses represent
the only significant mode of use of the product.

  "Installation Information" for a User Product means any methods,
procedures, authorization keys, or other information required to install
and execute modified versions of a covered work in that User Product from
a modified version of its Corresponding Source.  The information must
suffice to ensure that the continued functioning of the modified object
code is in no case prevented or interfered with solely because
modification has been made.

  If you convey an object code work under this section in, or with, or
specifically for use in, a User Product, and the conveying occurs as
part of a transaction in which the right of possession and use of the
User Product is transferred to the recipient in perpetuity or for a
fixed term (regardless of how the transaction is characterized), the
Corresponding Source conveyed under this section must be accompanied
by the Installation Information.  But this requirement does not apply
if neither you nor any third party retains the ability to install
modified object code on the User Product (for example, the work has
been installed in ROM).

  The requirement to provide Installation Information does not include a
requirement to continue to provide support service, warranty, or updates
for a work that has been modified or installed by the recipient, or for
the User Product in which it has been modified or installed.  Access to a
network may be denied when the modification itself materially and
adversely affects the operation of the network or violates the rules and
protocols for communication across the network.

  Corresponding Source conveyed, and Installation Information provided,
in accord with this section must be in a format that is publicly
documented (and with an implementation available to the public in
source code form), and must require no special password or key for
unpacking, reading or copying.

  7. Additional Terms.

  "Additional permissions" are terms that supplement the terms of this
License by making exceptions from one or more of its conditions.
Additional permissions that are applicable to the entire Program shall
be treated as though they were included in this License, to the extent
that they are valid under applicable law.  If additional permissions
apply only to part of the Program, that part may be used separately
under those permissions, but the entire Program remains governed by
this License without regard to the additional permissions.

  When you convey a copy of a covered work, you may at your option
remove any additional permissions from that copy, or from any part of
it.  (Additional permissions may be written to require their own
removal in certain cases when you modify the work.)  You may place
additional permissions on material, added by you to a covered work,
for which you have or can give appropriate copyright permission.

  Notwithstanding any other provision of this License, for material you
add to a covered work, you may (if authorized by the copyright holders of
that material) supplement the terms of this License with terms:

    a) Disclaiming warranty or limiting liability differently from the
    terms of sections 15 and 16 of this License; or

    b) Requiring preservation of specified reasonable legal notices or
    author attributions in that material or in the Appropriate Legal
    Notices displayed by works containing it; or

    c) Prohibiting misrepresentation of the origin of that material, or
    requiring that modified versions of such material be marked in
    reasonable ways as different from the original version; or

    d) Limiting the use for publicity purposes of names of licensors or
    authors of the material; or

    e) Declining to grant rights under trademark law for use of some
    trade names, trademarks, or service marks; or

    f) Requiring indemnification of licensors and authors of that
    material by anyone who conveys the material (or modified versions of
    it) with contractual assumptions of liability to the recipient, for
    any liability that these contractual assumptions directly impose on
    those licensors and authors.

  All other non-permissive additional terms are considered "further
restrictions" within the meaning of section 10.  If the Program as you
received it, or any part of it, contains a notice stating that it is
governed by this License along with a term that is a further
restriction, you may remove that term.  If a license document contains
a further restriction but permits relicensing or conveying under this
License, you may add to a covered work material governed by the terms
of that license document, provided that the further restriction does
not survive such relicensing or conveying.

  If you add terms to a covered work in accord with this section, you
must place, in the relevant source files, a statement of the
additional terms that apply to those files, or a notice indicating
where to find the applicable terms.

  Additional terms, permissive or non-permissive, may be stated in the
form of a separately written license, or stated as exceptions;
the above requirements apply either way.

  8. Termination.

  You may not propagate or modify a covered work except as expressly
provided under this License.  Any attempt otherwise to propagate or
modify it is void, and will automatically terminate your rights under
this License (including any patent licenses granted under the third
paragraph of section 11).

  However, if you cease all violation of this License, then your
license from a particular copyright holder is reinstated (a)
provisionally, unless and until the copyright holder explicitly and
finally terminates your license, and (b) permanently, if the copyright
holder fails to notify you of the violation by some reasonable means
prior to 60 days after the cessation.

  Moreover, your license from a particular copyright holder is
reinstated permanently if the copyright holder notifies you of the
violation by some reasonable means, this is the first time you have
received notice of violation of this License (for any work) from that
copyright holder, and you cure the violation prior to 30 days after
your receipt of the notice.

  Termination of your rights under this section does not terminate the
licenses of parties who have received copies or rights from you under
this License.  If your rights have been terminated and not permanently
reinstated, you do not qualify to receive new licenses for the same
material under section 10.

  9. Acceptance Not Required for Having Copies.

  You are not required to accept this License in order to receive or
run a copy of the Program.  Ancillary propagation of a covered work
occurring solely as a consequence of using peer-to-peer transmission
to receive a copy likewise does not require acceptance.  However,
nothing other than this License grants you permission to propagate or
modify any covered work.  These actions infringe copyright if you do
not accept this License.  Therefore, by modifying or propagating a
covered work, you indicate your acceptance of this License to do so.

  10. Automatic Licensing of Downstream Recipients.

  Each time you convey a covered work, the recipient automatically
receives a license from the original licensors, to run, modify and
propagate that work, subject to this License.  You are not responsible
for enforcing compliance by third parties with this License.

  An "entity transaction" is a transaction transferring control of an
organization, or substantially all assets of one, or subdividing an
organization, or merging organizations.  If propagation of a covered
work results from an entity transaction, each party to that
transaction who receives a copy of the work also receives whatever
licenses to the work the party's predecessor in interest had or could
give under the previous paragraph, plus a right to possession of the
Corresponding Source of the work from the predecessor in interest, if
the predecessor has it or can get it with reasonable efforts.

  You may not impose any further restrictions on the exercise of the
rights granted or affirmed under this License.  For example, you may
not impose a license fee, royalty, or other charge for exercise of
rights granted under this License, and you may not initiate litigation
(including a cross-claim or counterclaim in a lawsuit) alleging that
any patent claim is infringed by making, using, selling, offering for
sale, or importing the Program or any portion of it.

  11. Patents.

  A "contributor" is a copyright holder who authorizes use under this
License of the Program or a work on which the Program is based.  The
work thus licensed is called the contributor's "contributor version".

  A contributor's "essential patent claims" are all patent claims
owned or controlled by the contributor, whether already acquired or
hereafter acquired, that would be infringed by some manner, permitted
by this License, of making, using, or selling its contributor version,
but do not include claims that would be infringed only as a
consequence of further modification of the contributor version.  For
purposes of this definition, "control" includes the right to grant
patent sublicenses in a manner consistent with the requirements of
this License.

  Each contributor grants you a non-exclusive, worldwide, royalty-free
patent license under the contributor's essential patent claims, to
make, use, sell, offer for sale, import and otherwise run, modify and
propagate the contents of its contributor version.

  In the following three paragraphs, a "patent license" is any express
agreement or commitment, however denominated, not to enforce a patent
(such as an express permission to practice a patent or covenant not to
sue for patent infringement).  To "grant" such a patent license to a
party means to make such an agreement or commitment not to enforce a
patent against the party.

  If you convey a covered work, knowingly relying on a patent license,
and the Corresponding Source of the work is not available for anyone
to copy, free of charge and under the terms of this License, through a
publicly available network server or other readily accessible means,
then you must either (1) cause the Corresponding Source to be so
available, or (2) arrange to deprive yourself of the benefit of the
patent license for this particular work, or (3) arrange, in a manner
consistent with the requirements of this License, to extend the patent
license to downstream recipients.  "Knowingly relying" means you have
actual knowledge that, but for the patent license, your conveying the
covered work in a country, or your recipient's use of the covered work
in a country, would infringe one or more identifiable patents in that
country that you have reason to believe are valid.

  If, pursuant to or in connection with a single transaction or
arrangement, you convey, or propagate by procuring conveyance of, a
covered work, and grant a patent license to some of the parties
receiving the covered work authorizing them to use, propagate, modify
or convey a specific copy of the covered work, then the patent license
you grant is automatically extended to all recipients of the covered
work and works based on it.

  A patent license is "discriminatory" if it does not include within
the scope of its coverage, prohibits the exercise of, or is
conditioned on the non-exercise of one or more of the rights that are
specifically granted under this License.  You may not convey a covered
work if you are a party to an arrangement with a third party that is
in the business of distributing software, under which you make payment
to the third party based on the extent of your activity of conveying
the work, and under which the third party grants, to any of the
parties who would receive the covered work from you, a discriminatory
patent license (a) in connection with copies of the covered work
conveyed by you (or copies made from those copies), or (b) primarily
for and in connection with specific products or compilations that
contain the covered work, unless you entered into that arrangement,
or that patent license was granted, prior to 28 March 2007.

  Nothing in this License shall be construed as excluding or limiting
any implied license or other defenses to infringement that may
otherwise be available to you under applicable patent law.

  12. No Surrender of Others' Freedom.

  If conditions are imposed on you (whether by court order, agreement or
otherwise) that contradict the conditions of this License, they do not
excuse you from the conditions of this License.  If you cannot convey a
covered work so as to satisfy simultaneously your obligations under this
License and any other pertinent obligations, then as a consequence you may
not convey it at all.  For example, if you agree to terms that obligate you
to collect a royalty for further conveying from those to whom you convey
the Program, the only way you could satisfy both those terms and this
License would be to refrain entirely from conveying the Program.

  13. Use with the GNU Affero General Public License.

  Notwithstanding any other provision of this License, you have
permission to link or combine any covered work with a work licensed
under version 3 of the GNU Affero General Public License into a single
combined work, and to convey the resulting work.  The terms of this
License will continue to apply to the part which is the covered work,
but the special requirements of the GNU Affero General Public License,
section 13, concerning interaction through a network will apply to the
combination as such.

  14. Revised Versions of this License.

  The Free Software Foundation may publish revised and/or new versions of
the GNU General Public License from time to time.  Such new versions will
be similar in spirit to the present version, but may differ in detail to
address new problems or concerns.

  Each version is given a distinguishing version number.  If the
Program specifies that a certain numbered version of the GNU General
Public License "or any later version" applies to it, you have the
option of following the terms and conditions either of that numbered
version or of any later version published by the Free Software
Foundation.  If the Program does not specify a version number of the
GNU General Public License, you may choose any version ever published
by the Free Software Foundation.

  If the Program specifies that a proxy can decide which future
versions of the GNU General Public License can be used, that proxy's
public statement of acceptance of a version permanently authorizes you
to choose that version for the Program.

  Later license versions may give you additional or different
permissions.  However, no additional obligations are imposed on any
author or copyright holder as a result of your choosing to follow a
later version.

  15. Disclaimer of Warranty.

  THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
APPLICABLE LAW.  EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
IS WITH YOU.  SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
ALL NECESSARY SERVICING, REPAIR OR CORRECTION.

  16. Limitation of Liability.

  IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.

  17. Interpretation of Sections 15 and 16.

  If the disclaimer of warranty and limitation of liability provided
above cannot be given local legal effect according to their terms,
reviewing courts shall apply local law that most closely approximates
an absolute waiver of all civil liability in connection with the
Program, unless a warranty or assumption of liability accompanies a
copy of the Program in return for a fee.

                     END OF TERMS AND CONDITIONS

            How to Apply These Terms to Your New Programs

  If you develop a new program, and you want it to be of the greatest
possible use to the public, the best way to achieve this is to make it
free software which everyone can redistribute and change under these terms.

  To do so, attach the following notices to the program.  It is safest
to attach them to the start of each source file to most effectively
state the exclusion of warranty; and each file should have at least
the "copyright" line and a pointer to where the full notice is found.

    <one line to give the program's name and a brief idea of what it does.>
    Copyright (C) <year>  <name of author>

    This program is free software: you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation, either version 3 of the License, or
    (at your option) any later version.

    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program.  If not, see <http://www.gnu.org/licenses/>.

Also add information on how to contact you by electronic and paper mail.

  If the program does terminal interaction, make it output a short
notice like this when it starts in an interactive mode:

    <program>  Copyright (C) <year>  <name of author>
    This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
    This is free software, and you are welcome to redistribute it
    under certain conditions; type `show c' for details.

The hypothetical commands `show w' and `show c' should show the appropriate
parts of the General Public License.  Of course, your program's commands
might be different; for a GUI interface, you would use an "about box".

  You should also get your employer (if you work as a programmer) or school,
if any, to sign a "copyright disclaimer" for the program, if necessary.
For more information on this, and how to apply and follow the GNU GPL, see
<http://www.gnu.org/licenses/>.

  The GNU General Public License does not permit incorporating your program
into proprietary programs.  If your program is a subroutine library, you
may consider it more useful to permit linking proprietary applications with
the library.  If this is what you want to do, use the GNU Lesser General
Public License instead of this License.  But first, please read
<http://www.gnu.org/philosophy/why-not-lgpl.html>.

*/

// File: @openzeppelin/upgrades/contracts/upgradeability/Proxy.sol

pragma solidity ^0.5.0;

/**
 * @title Proxy
 * @dev Implements delegation of calls to other contracts, with proper
 * forwarding of return values and bubbling of failures.
 * It defines a fallback function that delegates all calls to the address
 * returned by the abstract _implementation() internal function.
 */
contract Proxy {
  /**
   * @dev Fallback function.
   * Implemented entirely in `_fallback`.
   */
  function () payable external {
    _fallback();
  }

  /**
   * @return The Address of the implementation.
   */
  function _implementation() internal view returns (address);

  /**
   * @dev Delegates execution to an implementation contract.
   * This is a low level function that doesn't return to its internal call site.
   * It will return to the external caller whatever the implementation returns.
   * @param implementation Address to delegate.
   */
  function _delegate(address implementation) internal {
    assembly {
      // Copy msg.data. We take full control of memory in this inline assembly
      // block because it will not return to Solidity code. We overwrite the
      // Solidity scratch pad at memory position 0.
      calldatacopy(0, 0, calldatasize)

      // Call the implementation.
      // out and outsize are 0 because we don't know the size yet.
      let result := delegatecall(gas, implementation, 0, calldatasize, 0, 0)

      // Copy the returned data.
      returndatacopy(0, 0, returndatasize)

      switch result
      // delegatecall returns 0 on error.
      case 0 { revert(0, returndatasize) }
      default { return(0, returndatasize) }
    }
  }

  /**
   * @dev Function that is run as the first thing in the fallback function.
   * Can be redefined in derived contracts to add functionality.
   * Redefinitions must call super._willFallback().
   */
  function _willFallback() internal {
  }

  /**
   * @dev fallback implementation.
   * Extracted to enable manual triggering.
   */
  function _fallback() internal {
    _willFallback();
    _delegate(_implementation());
  }
}

// File: @openzeppelin/upgrades/contracts/utils/Address.sol

pragma solidity ^0.5.0;

/**
 * Utility library of inline functions on addresses
 *
 * Source https://raw.githubusercontent.com/OpenZeppelin/openzeppelin-solidity/v2.1.3/contracts/utils/Address.sol
 * This contract is copied here and renamed from the original to avoid clashes in the compiled artifacts
 * when the user imports a zos-lib contract (that transitively causes this contract to be compiled and added to the
 * build/artifacts folder) as well as the vanilla Address implementation from an openzeppelin version.
 */
library OpenZeppelinUpgradesAddress {
    /**
     * Returns whether the target address is a contract
     * @dev This function will return false if invoked during the constructor of a contract,
     * as the code is not actually created until after the constructor finishes.
     * @param account address of the account to check
     * @return whether the target address is a contract
     */
    function isContract(address account) internal view returns (bool) {
        uint256 size;
        // XXX Currently there is no better way to check if there is a contract in an address
        // than to check the size of the code at that address.
        // See https://ethereum.stackexchange.com/a/14016/36603
        // for more details about how this works.
        // TODO Check this again before the Serenity release, because all addresses will be
        // contracts then.
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }
}

// File: @openzeppelin/upgrades/contracts/upgradeability/BaseUpgradeabilityProxy.sol

pragma solidity ^0.5.0;



/**
 * @title BaseUpgradeabilityProxy
 * @dev This contract implements a proxy that allows to change the
 * implementation address to which it will delegate.
 * Such a change is called an implementation upgrade.
 */
contract BaseUpgradeabilityProxy is Proxy {
  /**
   * @dev Emitted when the implementation is upgraded.
   * @param implementation Address of the new implementation.
   */
  event Upgraded(address indexed implementation);

  /**
   * @dev Storage slot with the address of the current implementation.
   * This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1, and is
   * validated in the constructor.
   */
  bytes32 internal constant IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;

  /**
   * @dev Returns the current implementation.
   * @return Address of the current implementation
   */
  function _implementation() internal view returns (address impl) {
    bytes32 slot = IMPLEMENTATION_SLOT;
    assembly {
      impl := sload(slot)
    }
  }

  /**
   * @dev Upgrades the proxy to a new implementation.
   * @param newImplementation Address of the new implementation.
   */
  function _upgradeTo(address newImplementation) internal {
    _setImplementation(newImplementation);
    emit Upgraded(newImplementation);
  }

  /**
   * @dev Sets the implementation address of the proxy.
   * @param newImplementation Address of the new implementation.
   */
  function _setImplementation(address newImplementation) internal {
    require(OpenZeppelinUpgradesAddress.isContract(newImplementation), "Cannot set a proxy implementation to a non-contract address");

    bytes32 slot = IMPLEMENTATION_SLOT;

    assembly {
      sstore(slot, newImplementation)
    }
  }
}

// File: @openzeppelin/upgrades/contracts/upgradeability/UpgradeabilityProxy.sol

pragma solidity ^0.5.0;


/**
 * @title UpgradeabilityProxy
 * @dev Extends BaseUpgradeabilityProxy with a constructor for initializing
 * implementation and init data.
 */
contract UpgradeabilityProxy is BaseUpgradeabilityProxy {
  /**
   * @dev Contract constructor.
   * @param _logic Address of the initial implementation.
   * @param _data Data to send as msg.data to the implementation to initialize the proxied contract.
   * It should include the signature and the parameters of the function to be called, as described in
   * https://solidity.readthedocs.io/en/v0.4.24/abi-spec.html#function-selector-and-argument-encoding.
   * This parameter is optional, if no data is given the initialization call to proxied contract will be skipped.
   */
  constructor(address _logic, bytes memory _data) public payable {
    assert(IMPLEMENTATION_SLOT == bytes32(uint256(keccak256('eip1967.proxy.implementation')) - 1));
    _setImplementation(_logic);
    if(_data.length > 0) {
      (bool success,) = _logic.delegatecall(_data);
      require(success);
    }
  }  
}

// File: @openzeppelin/upgrades/contracts/upgradeability/BaseAdminUpgradeabilityProxy.sol

pragma solidity ^0.5.0;


/**
 * @title BaseAdminUpgradeabilityProxy
 * @dev This contract combines an upgradeability proxy with an authorization
 * mechanism for administrative tasks.
 * All external functions in this contract must be guarded by the
 * `ifAdmin` modifier. See ethereum/solidity#3864 for a Solidity
 * feature proposal that would enable this to be done automatically.
 */
contract BaseAdminUpgradeabilityProxy is BaseUpgradeabilityProxy {
  /**
   * @dev Emitted when the administration has been transferred.
   * @param previousAdmin Address of the previous admin.
   * @param newAdmin Address of the new admin.
   */
  event AdminChanged(address previousAdmin, address newAdmin);

  /**
   * @dev Storage slot with the admin of the contract.
   * This is the keccak-256 hash of "eip1967.proxy.admin" subtracted by 1, and is
   * validated in the constructor.
   */

  bytes32 internal constant ADMIN_SLOT = 0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103;

  /**
   * @dev Modifier to check whether the `msg.sender` is the admin.
   * If it is, it will run the function. Otherwise, it will delegate the call
   * to the implementation.
   */
  modifier ifAdmin() {
    if (msg.sender == _admin()) {
      _;
    } else {
      _fallback();
    }
  }

  /**
   * @return The address of the proxy admin.
   */
  function admin() external ifAdmin returns (address) {
    return _admin();
  }

  /**
   * @return The address of the implementation.
   */
  function implementation() external ifAdmin returns (address) {
    return _implementation();
  }

  /**
   * @dev Changes the admin of the proxy.
   * Only the current admin can call this function.
   * @param newAdmin Address to transfer proxy administration to.
   */
  function changeAdmin(address newAdmin) external ifAdmin {
    require(newAdmin != address(0), "Cannot change the admin of a proxy to the zero address");
    emit AdminChanged(_admin(), newAdmin);
    _setAdmin(newAdmin);
  }

  /**
   * @dev Upgrade the backing implementation of the proxy.
   * Only the admin can call this function.
   * @param newImplementation Address of the new implementation.
   */
  function upgradeTo(address newImplementation) external ifAdmin {
    _upgradeTo(newImplementation);
  }

  /**
   * @dev Upgrade the backing implementation of the proxy and call a function
   * on the new implementation.
   * This is useful to initialize the proxied contract.
   * @param newImplementation Address of the new implementation.
   * @param data Data to send as msg.data in the low level call.
   * It should include the signature and the parameters of the function to be called, as described in
   * https://solidity.readthedocs.io/en/v0.4.24/abi-spec.html#function-selector-and-argument-encoding.
   */
  function upgradeToAndCall(address newImplementation, bytes calldata data) payable external ifAdmin {
    _upgradeTo(newImplementation);
    (bool success,) = newImplementation.delegatecall(data);
    require(success);
  }

  /**
   * @return The admin slot.
   */
  function _admin() internal view returns (address adm) {
    bytes32 slot = ADMIN_SLOT;
    assembly {
      adm := sload(slot)
    }
  }

  /**
   * @dev Sets the address of the proxy admin.
   * @param newAdmin Address of the new proxy admin.
   */
  function _setAdmin(address newAdmin) internal {
    bytes32 slot = ADMIN_SLOT;

    assembly {
      sstore(slot, newAdmin)
    }
  }

  /**
   * @dev Only fall back when the sender is not the admin.
   */
  function _willFallback() internal {
    require(msg.sender != _admin(), "Cannot call fallback function from the proxy admin");
    super._willFallback();
  }
}

// File: @openzeppelin/upgrades/contracts/upgradeability/AdminUpgradeabilityProxy.sol

pragma solidity ^0.5.0;


/**
 * @title AdminUpgradeabilityProxy
 * @dev Extends from BaseAdminUpgradeabilityProxy with a constructor for 
 * initializing the implementation, admin, and init data.
 */
contract AdminUpgradeabilityProxy is BaseAdminUpgradeabilityProxy, UpgradeabilityProxy {
  /**
   * Contract constructor.
   * @param _logic address of the initial implementation.
   * @param _admin Address of the proxy administrator.
   * @param _data Data to send as msg.data to the implementation to initialize the proxied contract.
   * It should include the signature and the parameters of the function to be called, as described in
   * https://solidity.readthedocs.io/en/v0.4.24/abi-spec.html#function-selector-and-argument-encoding.
   * This parameter is optional, if no data is given the initialization call to proxied contract will be skipped.
   */
  constructor(address _logic, address _admin, bytes memory _data) UpgradeabilityProxy(_logic, _data) public payable {
    assert(ADMIN_SLOT == bytes32(uint256(keccak256('eip1967.proxy.admin')) - 1));
    _setAdmin(_admin);
  }
}

// File: @openzeppelin/contracts-ethereum-package/contracts/utils/EnumerableSet.sol

pragma solidity ^0.6.0;

/**
 * @dev Library for managing
 * https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
 * types.
 *
 * Sets have the following properties:
 *
 * - Elements are added, removed, and checked for existence in constant time
 * (O(1)).
 * - Elements are enumerated in O(n). No guarantees are made on the ordering.
 *
 * ```
 * contract Example {
 *     // Add the library methods
 *     using EnumerableSet for EnumerableSet.AddressSet;
 *
 *     // Declare a set state variable
 *     EnumerableSet.AddressSet private mySet;
 * }
 * ```
 *
 * As of v3.0.0, only sets of type `address` (`AddressSet`) and `uint256`
 * (`UintSet`) are supported.
 */
library EnumerableSet {
    // To implement this library for multiple types with as little code
    // repetition as possible, we write it in terms of a generic Set type with
    // bytes32 values.
    // The Set implementation uses private functions, and user-facing
    // implementations (such as AddressSet) are just wrappers around the
    // underlying Set.
    // This means that we can only create new EnumerableSets for types that fit
    // in bytes32.

    struct Set {
        // Storage of set values
        bytes32[] _values;

        // Position of the value in the `values` array, plus 1 because index 0
        // means a value is not in the set.
        mapping (bytes32 => uint256) _indexes;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function _add(Set storage set, bytes32 value) private returns (bool) {
        if (!_contains(set, value)) {
            set._values.push(value);
            // The value is stored at length-1, but we add 1 to all indexes
            // and use 0 as a sentinel value
            set._indexes[value] = set._values.length;
            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function _remove(Set storage set, bytes32 value) private returns (bool) {
        // We read and store the value's index to prevent multiple reads from the same storage slot
        uint256 valueIndex = set._indexes[value];

        if (valueIndex != 0) { // Equivalent to contains(set, value)
            // To delete an element from the _values array in O(1), we swap the element to delete with the last one in
            // the array, and then remove the last element (sometimes called as 'swap and pop').
            // This modifies the order of the array, as noted in {at}.

            uint256 toDeleteIndex = valueIndex - 1;
            uint256 lastIndex = set._values.length - 1;

            // When the value to delete is the last one, the swap operation is unnecessary. However, since this occurs
            // so rarely, we still do the swap anyway to avoid the gas cost of adding an 'if' statement.

            bytes32 lastvalue = set._values[lastIndex];

            // Move the last value to the index where the value to delete is
            set._values[toDeleteIndex] = lastvalue;
            // Update the index for the moved value
            set._indexes[lastvalue] = toDeleteIndex + 1; // All indexes are 1-based

            // Delete the slot where the moved value was stored
            set._values.pop();

            // Delete the index for the deleted slot
            delete set._indexes[value];

            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function _contains(Set storage set, bytes32 value) private view returns (bool) {
        return set._indexes[value] != 0;
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function _length(Set storage set) private view returns (uint256) {
        return set._values.length;
    }

   /**
    * @dev Returns the value stored at position `index` in the set. O(1).
    *
    * Note that there are no guarantees on the ordering of values inside the
    * array, and it may change when more values are added or removed.
    *
    * Requirements:
    *
    * - `index` must be strictly less than {length}.
    */
    function _at(Set storage set, uint256 index) private view returns (bytes32) {
        require(set._values.length > index, "EnumerableSet: index out of bounds");
        return set._values[index];
    }

    // AddressSet

    struct AddressSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(AddressSet storage set, address value) internal returns (bool) {
        return _add(set._inner, bytes32(uint256(value)));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(AddressSet storage set, address value) internal returns (bool) {
        return _remove(set._inner, bytes32(uint256(value)));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(AddressSet storage set, address value) internal view returns (bool) {
        return _contains(set._inner, bytes32(uint256(value)));
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(AddressSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

   /**
    * @dev Returns the value stored at position `index` in the set. O(1).
    *
    * Note that there are no guarantees on the ordering of values inside the
    * array, and it may change when more values are added or removed.
    *
    * Requirements:
    *
    * - `index` must be strictly less than {length}.
    */
    function at(AddressSet storage set, uint256 index) internal view returns (address) {
        return address(uint256(_at(set._inner, index)));
    }


    // UintSet

    struct UintSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(UintSet storage set, uint256 value) internal returns (bool) {
        return _add(set._inner, bytes32(value));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(UintSet storage set, uint256 value) internal returns (bool) {
        return _remove(set._inner, bytes32(value));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(UintSet storage set, uint256 value) internal view returns (bool) {
        return _contains(set._inner, bytes32(value));
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function length(UintSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

   /**
    * @dev Returns the value stored at position `index` in the set. O(1).
    *
    * Note that there are no guarantees on the ordering of values inside the
    * array, and it may change when more values are added or removed.
    *
    * Requirements:
    *
    * - `index` must be strictly less than {length}.
    */
    function at(UintSet storage set, uint256 index) internal view returns (uint256) {
        return uint256(_at(set._inner, index));
    }
}

// File: @openzeppelin/contracts-ethereum-package/contracts/utils/Address.sol

pragma solidity ^0.6.2;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // According to EIP-1052, 0x0 is the value returned for not-yet created accounts
        // and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
        // for accounts without code, i.e. `keccak256('')`
        bytes32 codehash;
        bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
        // solhint-disable-next-line no-inline-assembly
        assembly { codehash := extcodehash(account) }
        return (codehash != accountHash && codehash != 0x0);
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }
}

// File: @openzeppelin/contracts-ethereum-package/contracts/Initializable.sol

pragma solidity >=0.4.24 <0.7.0;


/**
 * @title Initializable
 *
 * @dev Helper contract to support initializer functions. To use it, replace
 * the constructor with a function that has the `initializer` modifier.
 * WARNING: Unlike constructors, initializer functions must be manually
 * invoked. This applies both to deploying an Initializable contract, as well
 * as extending an Initializable contract via inheritance.
 * WARNING: When used with inheritance, manual care must be taken to not invoke
 * a parent initializer twice, or ensure that all initializers are idempotent,
 * because this is not dealt with automatically as with constructors.
 */
contract Initializable {

  /**
   * @dev Indicates that the contract has been initialized.
   */
  bool private initialized;

  /**
   * @dev Indicates that the contract is in the process of being initialized.
   */
  bool private initializing;

  /**
   * @dev Modifier to use in the initializer function of a contract.
   */
  modifier initializer() {
    require(initializing || isConstructor() || !initialized, "Contract instance has already been initialized");

    bool isTopLevelCall = !initializing;
    if (isTopLevelCall) {
      initializing = true;
      initialized = true;
    }

    _;

    if (isTopLevelCall) {
      initializing = false;
    }
  }

  /// @dev Returns true if and only if the function is running in the constructor
  function isConstructor() private view returns (bool) {
    // extcodesize checks the size of the code stored in an address, and
    // address returns the current address. Since the code is still not
    // deployed when running a constructor, any checks on its code size will
    // yield zero, making it an effective way to detect if a contract is
    // under construction or not.
    address self = address(this);
    uint256 cs;
    assembly { cs := extcodesize(self) }
    return cs == 0;
  }

  // Reserved storage space to allow for layout changes in the future.
  uint256[50] private ______gap;
}

// File: @openzeppelin/contracts-ethereum-package/contracts/GSN/Context.sol

pragma solidity ^0.6.0;


/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
contract ContextUpgradeSafe is Initializable {
    // Empty internal constructor, to prevent people from mistakenly deploying
    // an instance of this contract, which should be used via inheritance.

    function __Context_init() internal initializer {
        __Context_init_unchained();
    }

    function __Context_init_unchained() internal initializer {


    }


    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }

    uint256[50] private __gap;
}

// File: @openzeppelin/contracts-ethereum-package/contracts/access/AccessControl.sol

pragma solidity ^0.6.0;





/**
 * @dev Contract module that allows children to implement role-based access
 * control mechanisms.
 *
 * Roles are referred to by their `bytes32` identifier. These should be exposed
 * in the external API and be unique. The best way to achieve this is by
 * using `public constant` hash digests:
 *
 * ```
 * bytes32 public constant MY_ROLE = keccak256("MY_ROLE");
 * ```
 *
 * Roles can be used to represent a set of permissions. To restrict access to a
 * function call, use {hasRole}:
 *
 * ```
 * function foo() public {
 *     require(hasRole(MY_ROLE, _msgSender()));
 *     ...
 * }
 * ```
 *
 * Roles can be granted and revoked dynamically via the {grantRole} and
 * {revokeRole} functions. Each role has an associated admin role, and only
 * accounts that have a role's admin role can call {grantRole} and {revokeRole}.
 *
 * By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means
 * that only accounts with this role will be able to grant or revoke other
 * roles. More complex role relationships can be created by using
 * {_setRoleAdmin}.
 */
abstract contract AccessControlUpgradeSafe is Initializable, ContextUpgradeSafe {
    function __AccessControl_init() internal initializer {
        __Context_init_unchained();
        __AccessControl_init_unchained();
    }

    function __AccessControl_init_unchained() internal initializer {


    }

    using EnumerableSet for EnumerableSet.AddressSet;
    using Address for address;

    struct RoleData {
        EnumerableSet.AddressSet members;
        bytes32 adminRole;
    }

    mapping (bytes32 => RoleData) private _roles;

    bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;

    /**
     * @dev Emitted when `account` is granted `role`.
     *
     * `sender` is the account that originated the contract call, an admin role
     * bearer except when using {_setupRole}.
     */
    event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);

    /**
     * @dev Emitted when `account` is revoked `role`.
     *
     * `sender` is the account that originated the contract call:
     *   - if using `revokeRole`, it is the admin role bearer
     *   - if using `renounceRole`, it is the role bearer (i.e. `account`)
     */
    event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);

    /**
     * @dev Returns `true` if `account` has been granted `role`.
     */
    function hasRole(bytes32 role, address account) public view returns (bool) {
        return _roles[role].members.contains(account);
    }

    /**
     * @dev Returns the number of accounts that have `role`. Can be used
     * together with {getRoleMember} to enumerate all bearers of a role.
     */
    function getRoleMemberCount(bytes32 role) public view returns (uint256) {
        return _roles[role].members.length();
    }

    /**
     * @dev Returns one of the accounts that have `role`. `index` must be a
     * value between 0 and {getRoleMemberCount}, non-inclusive.
     *
     * Role bearers are not sorted in any particular way, and their ordering may
     * change at any point.
     *
     * WARNING: When using {getRoleMember} and {getRoleMemberCount}, make sure
     * you perform all queries on the same block. See the following
     * https://forum.openzeppelin.com/t/iterating-over-elements-on-enumerableset-in-openzeppelin-contracts/2296[forum post]
     * for more information.
     */
    function getRoleMember(bytes32 role, uint256 index) public view returns (address) {
        return _roles[role].members.at(index);
    }

    /**
     * @dev Returns the admin role that controls `role`. See {grantRole} and
     * {revokeRole}.
     *
     * To change a role's admin, use {_setRoleAdmin}.
     */
    function getRoleAdmin(bytes32 role) public view returns (bytes32) {
        return _roles[role].adminRole;
    }

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function grantRole(bytes32 role, address account) public virtual {
        require(hasRole(_roles[role].adminRole, _msgSender()), "AccessControl: sender must be an admin to grant");

        _grantRole(role, account);
    }

    /**
     * @dev Revokes `role` from `account`.
     *
     * If `account` had been granted `role`, emits a {RoleRevoked} event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function revokeRole(bytes32 role, address account) public virtual {
        require(hasRole(_roles[role].adminRole, _msgSender()), "AccessControl: sender must be an admin to revoke");

        _revokeRole(role, account);
    }

    /**
     * @dev Revokes `role` from the calling account.
     *
     * Roles are often managed via {grantRole} and {revokeRole}: this function's
     * purpose is to provide a mechanism for accounts to lose their privileges
     * if they are compromised (such as when a trusted device is misplaced).
     *
     * If the calling account had been granted `role`, emits a {RoleRevoked}
     * event.
     *
     * Requirements:
     *
     * - the caller must be `account`.
     */
    function renounceRole(bytes32 role, address account) public virtual {
        require(account == _msgSender(), "AccessControl: can only renounce roles for self");

        _revokeRole(role, account);
    }

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event. Note that unlike {grantRole}, this function doesn't perform any
     * checks on the calling account.
     *
     * [WARNING]
     * ====
     * This function should only be called from the constructor when setting
     * up the initial roles for the system.
     *
     * Using this function in any other way is effectively circumventing the admin
     * system imposed by {AccessControl}.
     * ====
     */
    function _setupRole(bytes32 role, address account) internal virtual {
        _grantRole(role, account);
    }

    /**
     * @dev Sets `adminRole` as ``role``'s admin role.
     */
    function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {
        _roles[role].adminRole = adminRole;
    }

    function _grantRole(bytes32 role, address account) private {
        if (_roles[role].members.add(account)) {
            emit RoleGranted(role, account, _msgSender());
        }
    }

    function _revokeRole(bytes32 role, address account) private {
        if (_roles[role].members.remove(account)) {
            emit RoleRevoked(role, account, _msgSender());
        }
    }

    uint256[49] private __gap;
}

// File: @openzeppelin/contracts-ethereum-package/contracts/token/ERC20/IERC20.sol

pragma solidity ^0.6.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// File: @openzeppelin/contracts-ethereum-package/contracts/math/SafeMath.sol

pragma solidity ^0.6.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction overflow");
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        // Solidity only automatically asserts when dividing by 0
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, "SafeMath: modulo by zero");
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts with custom message when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }
}

// File: @openzeppelin/contracts-ethereum-package/contracts/token/ERC20/ERC20.sol

pragma solidity ^0.6.0;






/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20MinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin guidelines: functions revert instead
 * of returning `false` on failure. This behavior is nonetheless conventional
 * and does not conflict with the expectations of ERC20 applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20UpgradeSafe is Initializable, ContextUpgradeSafe, IERC20 {
    using SafeMath for uint256;
    using Address for address;

    mapping (address => uint256) private _balances;

    mapping (address => mapping (address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;
    uint8 private _decimals;

    /**
     * @dev Sets the values for {name} and {symbol}, initializes {decimals} with
     * a default value of 18.
     *
     * To select a different value for {decimals}, use {_setupDecimals}.
     *
     * All three of these values are immutable: they can only be set once during
     * construction.
     */

    function __ERC20_init(string memory name, string memory symbol) internal initializer {
        __Context_init_unchained();
        __ERC20_init_unchained(name, symbol);
    }

    function __ERC20_init_unchained(string memory name, string memory symbol) internal initializer {


        _name = name;
        _symbol = symbol;
        _decimals = 18;

    }


    /**
     * @dev Returns the name of the token.
     */
    function name() public view returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5,05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
     * called.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view returns (uint8) {
        return _decimals;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20};
     *
     * Requirements:
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for ``sender``'s tokens of at least
     * `amount`.
     */
    function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
        return true;
    }

    /**
     * @dev Moves tokens `amount` from `sender` to `recipient`.
     *
     * This is internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(address sender, address recipient, uint256 amount) internal virtual {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(sender, recipient, amount);

        _balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
        _balances[recipient] = _balances[recipient].add(amount);
        emit Transfer(sender, recipient, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements
     *
     * - `to` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply = _totalSupply.add(amount);
        _balances[account] = _balances[account].add(amount);
        emit Transfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        _balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
        _totalSupply = _totalSupply.sub(amount);
        emit Transfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
     *
     * This is internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(address owner, address spender, uint256 amount) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Sets {decimals} to a value other than the default one of 18.
     *
     * WARNING: This function should only be called from the constructor. Most
     * applications that interact with token contracts will not expect
     * {decimals} to ever change, and may work incorrectly if it does.
     */
    function _setupDecimals(uint8 decimals_) internal {
        _decimals = decimals_;
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be to transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }

    uint256[44] private __gap;
}

// File: @openzeppelin/contracts-ethereum-package/contracts/utils/Pausable.sol

pragma solidity ^0.6.0;



/**
 * @dev Contract module which allows children to implement an emergency stop
 * mechanism that can be triggered by an authorized account.
 *
 * This module is used through inheritance. It will make available the
 * modifiers `whenNotPaused` and `whenPaused`, which can be applied to
 * the functions of your contract. Note that they will not be pausable by
 * simply including this module, only once the modifiers are put in place.
 */
contract PausableUpgradeSafe is Initializable, ContextUpgradeSafe {
    /**
     * @dev Emitted when the pause is triggered by `account`.
     */
    event Paused(address account);

    /**
     * @dev Emitted when the pause is lifted by `account`.
     */
    event Unpaused(address account);

    bool private _paused;

    /**
     * @dev Initializes the contract in unpaused state.
     */

    function __Pausable_init() internal initializer {
        __Context_init_unchained();
        __Pausable_init_unchained();
    }

    function __Pausable_init_unchained() internal initializer {


        _paused = false;

    }


    /**
     * @dev Returns true if the contract is paused, and false otherwise.
     */
    function paused() public view returns (bool) {
        return _paused;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is not paused.
     */
    modifier whenNotPaused() {
        require(!_paused, "Pausable: paused");
        _;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is paused.
     */
    modifier whenPaused() {
        require(_paused, "Pausable: not paused");
        _;
    }

    /**
     * @dev Triggers stopped state.
     */
    function _pause() internal virtual whenNotPaused {
        _paused = true;
        emit Paused(_msgSender());
    }

    /**
     * @dev Returns to normal state.
     */
    function _unpause() internal virtual whenPaused {
        _paused = false;
        emit Unpaused(_msgSender());
    }

    uint256[49] private __gap;
}

// File: @openzeppelin/contracts-ethereum-package/contracts/token/ERC20/ERC20Pausable.sol

pragma solidity ^0.6.0;




/**
 * @dev ERC20 token with pausable token transfers, minting and burning.
 *
 * Useful for scenarios such as preventing trades until the end of an evaluation
 * period, or having an emergency switch for freezing all token transfers in the
 * event of a large bug.
 */
abstract contract ERC20PausableUpgradeSafe is Initializable, ERC20UpgradeSafe, PausableUpgradeSafe {
    function __ERC20Pausable_init() internal initializer {
        __Context_init_unchained();
        __Pausable_init_unchained();
        __ERC20Pausable_init_unchained();
    }

    function __ERC20Pausable_init_unchained() internal initializer {


    }

    /**
     * @dev See {ERC20-_beforeTokenTransfer}.
     *
     * Requirements:
     *
     * - the contract must not be paused.
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual override {
        super._beforeTokenTransfer(from, to, amount);

        require(!paused(), "ERC20Pausable: token transfer while paused");
    }

    uint256[50] private __gap;
}

// File: @openzeppelin/contracts-ethereum-package/contracts/token/ERC20/ERC20Burnable.sol

pragma solidity ^0.6.0;




/**
 * @dev Extension of {ERC20} that allows token holders to destroy both their own
 * tokens and those that they have an allowance for, in a way that can be
 * recognized off-chain (via event analysis).
 */
abstract contract ERC20BurnableUpgradeSafe is Initializable, ContextUpgradeSafe, ERC20UpgradeSafe {
    function __ERC20Burnable_init() internal initializer {
        __Context_init_unchained();
        __ERC20Burnable_init_unchained();
    }

    function __ERC20Burnable_init_unchained() internal initializer {


    }

    /**
     * @dev Destroys `amount` tokens from the caller.
     *
     * See {ERC20-_burn}.
     */
    function burn(uint256 amount) public virtual {
        _burn(_msgSender(), amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, deducting from the caller's
     * allowance.
     *
     * See {ERC20-_burn} and {ERC20-allowance}.
     *
     * Requirements:
     *
     * - the caller must have allowance for ``accounts``'s tokens of at least
     * `amount`.
     */
    function burnFrom(address account, uint256 amount) public virtual {
        uint256 decreasedAllowance = allowance(account, _msgSender()).sub(amount, "ERC20: burn amount exceeds allowance");

        _approve(account, _msgSender(), decreasedAllowance);
        _burn(account, amount);
    }

    uint256[50] private __gap;
}

// File: contracts/SwapToken.sol

pragma solidity ^0.6.0;




/**
 * @dev {ERC20} token, including:
 *
 *  - ability for holders to burn (destroy) their tokens
 *  - a minter role that allows for token minting (creation)
 *  - a pauser role that allows to stop all token transfers
 *
 * This contract uses {AccessControl} to lock permissioned functions using the
 * different roles - head to its documentation for details.
 *
 * The account that deploys the contract will be granted the minter and pauser
 * roles, as well as the default admin role, which will let it grant both minter
 * and pauser roles to aother accounts
 */
contract SwapToken is Initializable, ContextUpgradeSafe, AccessControlUpgradeSafe, ERC20BurnableUpgradeSafe, ERC20PausableUpgradeSafe {
    bytes32 public constant PAUSER_ROLE = keccak256("PAUSER_ROLE");

    /**
     * @dev Grants `DEFAULT_ADMIN_ROLE` and `PAUSER_ROLE` to the
     * account that deploys the contract.
     *
     * See {ERC20-constructor}.
     */

    function initialize(string memory name, string memory symbol, uint8 decimals, uint256 totalSupply) public {
        __SwapToken_init(name, symbol, decimals, totalSupply);
    }

    function __SwapToken_init(string memory name, string memory symbol, uint8 decimals, uint256 totalSupply) internal initializer {
        __Context_init_unchained();
        __AccessControl_init_unchained();
        __ERC20_init_unchained(name, symbol);
        __ERC20Burnable_init_unchained();
        __Pausable_init_unchained();
        __ERC20Pausable_init_unchained();
        __SwapToken_init_unchained();
        _mint(_msgSender(), totalSupply * (10 ** uint256(decimals)));
    }

    function __SwapToken_init_unchained() internal initializer {
        _setupRole(DEFAULT_ADMIN_ROLE, _msgSender());
        _setupRole(PAUSER_ROLE, _msgSender());
    }

    /**
     * @dev Pauses all token transfers.
     *
     * See {ERC20Pausable} and {Pausable-_pause}.
     *
     * Requirements:
     *
     * - the caller must have the `PAUSER_ROLE`.
     */
    function pause() public {
        require(hasRole(PAUSER_ROLE, _msgSender()), "SwapToken: must have pauser role to pause");
        _pause();
    }

    /**
     * @dev Unpauses all token transfers.
     *
     * See {ERC20Pausable} and {Pausable-_unpause}.
     *
     * Requirements:
     *
     * - the caller must have the `PAUSER_ROLE`.
     */
    function unpause() public {
        require(hasRole(PAUSER_ROLE, _msgSender()), "SwapToken: must have pauser role to unpause");
        _unpause();
    }

    function _beforeTokenTransfer(address from, address to, uint256 amount)
    internal 
    override(ERC20UpgradeSafe, ERC20PausableUpgradeSafe)
    notBlacklisted(to)
    notBlacklisted(from)
    {
        require(to != address(this), "SwapToken: can't transfer to contract address itself");
        super._beforeTokenTransfer(from, to, amount);
    }

    function _approve(address owner, address spender, uint256 amount)
    internal 
    override(ERC20UpgradeSafe)
    notBlacklisted(owner)
    notBlacklisted(spender)
    {
        super._approve(owner, spender, amount);
    }

    function withdrawTokens(address tokenContract) external {
        require(hasRole(DEFAULT_ADMIN_ROLE, _msgSender()), "SwapToken [withdrawTokens]: must have admin role to withdraw");
        IERC20 tc = IERC20(tokenContract);
        require(tc.transfer(_msgSender(), tc.balanceOf(address(this))), "SwapToken [withdrawTokens] Something went wrong while transferring");
    }

    function version() public pure returns (string memory) {
        return "v3";
    }

    uint256[50] private __gap;

    //BlackListing
    mapping(address => bool) internal blacklisted;
    event Blacklisted(address indexed _account);
    event UnBlacklisted(address indexed _account);

    /**
     * @dev Throws if argument account is blacklisted
     * @param _account The address to check
    */
    modifier notBlacklisted(address _account) {
        require(blacklisted[_account] == false);
        _;
    }

    /**
     * @dev Checks if account is blacklisted
     * @param _account The address to check    
    */
    function isBlacklisted(address _account) public view returns (bool) {
        return blacklisted[_account];
    }

    /**
     * @dev Adds account to blacklist
     * @param _account The address to blacklist
    */
    function blacklist(address _account) external {
        require(hasRole(DEFAULT_ADMIN_ROLE, _msgSender()), "SwapToken [blacklist]: must have admin role to blacklist");
        blacklisted[_account] = true;
        emit Blacklisted(_account);
    }

    /**
     * @dev Removes account from blacklist
     * @param _account The address to remove from the blacklist
    */
    function unBlacklist(address _account) external {
        require(hasRole(DEFAULT_ADMIN_ROLE, _msgSender()), "SwapToken [unBlacklist]: must have admin role to unBlacklist");
        blacklisted[_account] = false;
        emit UnBlacklisted(_account);
    }
}

# @title Uniswap Exchange Interface V1
# @notice Source code found at https://github.com/uniswap
# @notice Use at your own risk

contract Factory():
    def getExchange(token_addr: address) -> address: constant

contract Exchange():
    def getEthToTokenOutputPrice(tokens_bought: uint256) -> uint256(wei): constant
    def ethToTokenTransferInput(min_tokens: uint256, deadline: timestamp, recipient: address) -> uint256: modifying
    def ethToTokenTransferOutput(tokens_bought: uint256, deadline: timestamp, recipient: address) -> uint256(wei): modifying

TokenPurchase: event({buyer: indexed(address), eth_sold: indexed(uint256(wei)), tokens_bought: indexed(uint256)})
EthPurchase: event({buyer: indexed(address), tokens_sold: indexed(uint256), eth_bought: indexed(uint256(wei))})
AddLiquidity: event({provider: indexed(address), eth_amount: indexed(uint256(wei)), token_amount: indexed(uint256)})
RemoveLiquidity: event({provider: indexed(address), eth_amount: indexed(uint256(wei)), token_amount: indexed(uint256)})
Transfer: event({_from: indexed(address), _to: indexed(address), _value: uint256})
Approval: event({_owner: indexed(address), _spender: indexed(address), _value: uint256})

name: public(bytes32)                             # Uniswap V1
symbol: public(bytes32)                           # UNI-V1
decimals: public(uint256)                         # 18
totalSupply: public(uint256)                      # total number of UNI in existence
balances: uint256[address]                        # UNI balance of an address
allowances: (uint256[address])[address]           # UNI allowance of one address on another
token: address(ERC20)                             # address of the ERC20 token traded on this contract
factory: Factory                                  # interface for the factory that created this contract

# @dev This function acts as a contract constructor which is not currently supported in contracts deployed
#      using create_with_code_of(). It is called once by the factory during contract creation.
@public
def setup(token_addr: address):
    assert (self.factory == ZERO_ADDRESS and self.token == ZERO_ADDRESS) and token_addr != ZERO_ADDRESS
    self.factory = msg.sender
    self.token = token_addr
    self.name = 0x556e697377617020563100000000000000000000000000000000000000000000
    self.symbol = 0x554e492d56310000000000000000000000000000000000000000000000000000
    self.decimals = 18

# @notice Deposit ETH and Tokens (self.token) at current ratio to mint UNI tokens.
# @dev min_liquidity does nothing when total UNI supply is 0.
# @param min_liquidity Minimum number of UNI sender will mint if total UNI supply is greater than 0.
# @param max_tokens Maximum number of tokens deposited. Deposits max amount if total UNI supply is 0.
# @param deadline Time after which this transaction can no longer be executed.
# @return The amount of UNI minted.
@public
@payable
def addLiquidity(min_liquidity: uint256, max_tokens: uint256, deadline: timestamp) -> uint256:
    assert deadline > block.timestamp and (max_tokens > 0 and msg.value > 0)
    total_liquidity: uint256 = self.totalSupply
    if total_liquidity > 0:
        assert min_liquidity > 0
        eth_reserve: uint256(wei) = self.balance - msg.value
        token_reserve: uint256 = self.token.balanceOf(self)
        token_amount: uint256 = msg.value * token_reserve / eth_reserve + 1
        liquidity_minted: uint256 = msg.value * total_liquidity / eth_reserve
        assert max_tokens >= token_amount and liquidity_minted >= min_liquidity
        self.balances[msg.sender] += liquidity_minted
        self.totalSupply = total_liquidity + liquidity_minted
        assert self.token.transferFrom(msg.sender, self, token_amount)
        log.AddLiquidity(msg.sender, msg.value, token_amount)
        log.Transfer(ZERO_ADDRESS, msg.sender, liquidity_minted)
        return liquidity_minted
    else:
        assert (self.factory != ZERO_ADDRESS and self.token != ZERO_ADDRESS) and msg.value >= 1000000000
        assert self.factory.getExchange(self.token) == self
        token_amount: uint256 = max_tokens
        initial_liquidity: uint256 = as_unitless_number(self.balance)
        self.totalSupply = initial_liquidity
        self.balances[msg.sender] = initial_liquidity
        assert self.token.transferFrom(msg.sender, self, token_amount)
        log.AddLiquidity(msg.sender, msg.value, token_amount)
        log.Transfer(ZERO_ADDRESS, msg.sender, initial_liquidity)
        return initial_liquidity

# @dev Burn UNI tokens to withdraw ETH and Tokens at current ratio.
# @param amount Amount of UNI burned.
# @param min_eth Minimum ETH withdrawn.
# @param min_tokens Minimum Tokens withdrawn.
# @param deadline Time after which this transaction can no longer be executed.
# @return The amount of ETH and Tokens withdrawn.
@public
def removeLiquidity(amount: uint256, min_eth: uint256(wei), min_tokens: uint256, deadline: timestamp) -> (uint256(wei), uint256):
    assert (amount > 0 and deadline > block.timestamp) and (min_eth > 0 and min_tokens > 0)
    total_liquidity: uint256 = self.totalSupply
    assert total_liquidity > 0
    token_reserve: uint256 = self.token.balanceOf(self)
    eth_amount: uint256(wei) = amount * self.balance / total_liquidity
    token_amount: uint256 = amount * token_reserve / total_liquidity
    assert eth_amount >= min_eth and token_amount >= min_tokens
    self.balances[msg.sender] -= amount
    self.totalSupply = total_liquidity - amount
    send(msg.sender, eth_amount)
    assert self.token.transfer(msg.sender, token_amount)
    log.RemoveLiquidity(msg.sender, eth_amount, token_amount)
    log.Transfer(msg.sender, ZERO_ADDRESS, amount)
    return eth_amount, token_amount

# @dev Pricing function for converting between ETH and Tokens.
# @param input_amount Amount of ETH or Tokens being sold.
# @param input_reserve Amount of ETH or Tokens (input type) in exchange reserves.
# @param output_reserve Amount of ETH or Tokens (output type) in exchange reserves.
# @return Amount of ETH or Tokens bought.
@private
@constant
def getInputPrice(input_amount: uint256, input_reserve: uint256, output_reserve: uint256) -> uint256:
    assert input_reserve > 0 and output_reserve > 0
    input_amount_with_fee: uint256 = input_amount * 997
    numerator: uint256 = input_amount_with_fee * output_reserve
    denominator: uint256 = (input_reserve * 1000) + input_amount_with_fee
    return numerator / denominator

# @dev Pricing function for converting between ETH and Tokens.
# @param output_amount Amount of ETH or Tokens being bought.
# @param input_reserve Amount of ETH or Tokens (input type) in exchange reserves.
# @param output_reserve Amount of ETH or Tokens (output type) in exchange reserves.
# @return Amount of ETH or Tokens sold.
@private
@constant
def getOutputPrice(output_amount: uint256, input_reserve: uint256, output_reserve: uint256) -> uint256:
    assert input_reserve > 0 and output_reserve > 0
    numerator: uint256 = input_reserve * output_amount * 1000
    denominator: uint256 = (output_reserve - output_amount) * 997
    return numerator / denominator + 1

@private
def ethToTokenInput(eth_sold: uint256(wei), min_tokens: uint256, deadline: timestamp, buyer: address, recipient: address) -> uint256:
    assert deadline >= block.timestamp and (eth_sold > 0 and min_tokens > 0)
    token_reserve: uint256 = self.token.balanceOf(self)
    tokens_bought: uint256 = self.getInputPrice(as_unitless_number(eth_sold), as_unitless_number(self.balance - eth_sold), token_reserve)
    assert tokens_bought >= min_tokens
    assert self.token.transfer(recipient, tokens_bought)
    log.TokenPurchase(buyer, eth_sold, tokens_bought)
    return tokens_bought

# @notice Convert ETH to Tokens.
# @dev User specifies exact input (msg.value).
# @dev User cannot specify minimum output or deadline.
@public
@payable
def __default__():
    self.ethToTokenInput(msg.value, 1, block.timestamp, msg.sender, msg.sender)

# @notice Convert ETH to Tokens.
# @dev User specifies exact input (msg.value) and minimum output.
# @param min_tokens Minimum Tokens bought.
# @param deadline Time after which this transaction can no longer be executed.
# @return Amount of Tokens bought.
@public
@payable
def ethToTokenSwapInput(min_tokens: uint256, deadline: timestamp) -> uint256:
    return self.ethToTokenInput(msg.value, min_tokens, deadline, msg.sender, msg.sender)

# @notice Convert ETH to Tokens and transfers Tokens to recipient.
# @dev User specifies exact input (msg.value) and minimum output
# @param min_tokens Minimum Tokens bought.
# @param deadline Time after which this transaction can no longer be executed.
# @param recipient The address that receives output Tokens.
# @return Amount of Tokens bought.
@public
@payable
def ethToTokenTransferInput(min_tokens: uint256, deadline: timestamp, recipient: address) -> uint256:
    assert recipient != self and recipient != ZERO_ADDRESS
    return self.ethToTokenInput(msg.value, min_tokens, deadline, msg.sender, recipient)

@private
def ethToTokenOutput(tokens_bought: uint256, max_eth: uint256(wei), deadline: timestamp, buyer: address, recipient: address) -> uint256(wei):
    assert deadline >= block.timestamp and (tokens_bought > 0 and max_eth > 0)
    token_reserve: uint256 = self.token.balanceOf(self)
    eth_sold: uint256 = self.getOutputPrice(tokens_bought, as_unitless_number(self.balance - max_eth), token_reserve)
    # Throws if eth_sold > max_eth
    eth_refund: uint256(wei) = max_eth - as_wei_value(eth_sold, 'wei')
    if eth_refund > 0:
        send(buyer, eth_refund)
    assert self.token.transfer(recipient, tokens_bought)
    log.TokenPurchase(buyer, as_wei_value(eth_sold, 'wei'), tokens_bought)
    return as_wei_value(eth_sold, 'wei')

# @notice Convert ETH to Tokens.
# @dev User specifies maximum input (msg.value) and exact output.
# @param tokens_bought Amount of tokens bought.
# @param deadline Time after which this transaction can no longer be executed.
# @return Amount of ETH sold.
@public
@payable
def ethToTokenSwapOutput(tokens_bought: uint256, deadline: timestamp) -> uint256(wei):
    return self.ethToTokenOutput(tokens_bought, msg.value, deadline, msg.sender, msg.sender)

# @notice Convert ETH to Tokens and transfers Tokens to recipient.
# @dev User specifies maximum input (msg.value) and exact output.
# @param tokens_bought Amount of tokens bought.
# @param deadline Time after which this transaction can no longer be executed.
# @param recipient The address that receives output Tokens.
# @return Amount of ETH sold.
@public
@payable
def ethToTokenTransferOutput(tokens_bought: uint256, deadline: timestamp, recipient: address) -> uint256(wei):
    assert recipient != self and recipient != ZERO_ADDRESS
    return self.ethToTokenOutput(tokens_bought, msg.value, deadline, msg.sender, recipient)

@private
def tokenToEthInput(tokens_sold: uint256, min_eth: uint256(wei), deadline: timestamp, buyer: address, recipient: address) -> uint256(wei):
    assert deadline >= block.timestamp and (tokens_sold > 0 and min_eth > 0)
    token_reserve: uint256 = self.token.balanceOf(self)
    eth_bought: uint256 = self.getInputPrice(tokens_sold, token_reserve, as_unitless_number(self.balance))
    wei_bought: uint256(wei) = as_wei_value(eth_bought, 'wei')
    assert wei_bought >= min_eth
    send(recipient, wei_bought)
    assert self.token.transferFrom(buyer, self, tokens_sold)
    log.EthPurchase(buyer, tokens_sold, wei_bought)
    return wei_bought


# @notice Convert Tokens to ETH.
# @dev User specifies exact input and minimum output.
# @param tokens_sold Amount of Tokens sold.
# @param min_eth Minimum ETH purchased.
# @param deadline Time after which this transaction can no longer be executed.
# @return Amount of ETH bought.
@public
def tokenToEthSwapInput(tokens_sold: uint256, min_eth: uint256(wei), deadline: timestamp) -> uint256(wei):
    return self.tokenToEthInput(tokens_sold, min_eth, deadline, msg.sender, msg.sender)

# @notice Convert Tokens to ETH and transfers ETH to recipient.
# @dev User specifies exact input and minimum output.
# @param tokens_sold Amount of Tokens sold.
# @param min_eth Minimum ETH purchased.
# @param deadline Time after which this transaction can no longer be executed.
# @param recipient The address that receives output ETH.
# @return Amount of ETH bought.
@public
def tokenToEthTransferInput(tokens_sold: uint256, min_eth: uint256(wei), deadline: timestamp, recipient: address) -> uint256(wei):
    assert recipient != self and recipient != ZERO_ADDRESS
    return self.tokenToEthInput(tokens_sold, min_eth, deadline, msg.sender, recipient)

@private
def tokenToEthOutput(eth_bought: uint256(wei), max_tokens: uint256, deadline: timestamp, buyer: address, recipient: address) -> uint256:
    assert deadline >= block.timestamp and eth_bought > 0
    token_reserve: uint256 = self.token.balanceOf(self)
    tokens_sold: uint256 = self.getOutputPrice(as_unitless_number(eth_bought), token_reserve, as_unitless_number(self.balance))
    # tokens sold is always > 0
    assert max_tokens >= tokens_sold
    send(recipient, eth_bought)
    assert self.token.transferFrom(buyer, self, tokens_sold)
    log.EthPurchase(buyer, tokens_sold, eth_bought)
    return tokens_sold

# @notice Convert Tokens to ETH.
# @dev User specifies maximum input and exact output.
# @param eth_bought Amount of ETH purchased.
# @param max_tokens Maximum Tokens sold.
# @param deadline Time after which this transaction can no longer be executed.
# @return Amount of Tokens sold.
@public
def tokenToEthSwapOutput(eth_bought: uint256(wei), max_tokens: uint256, deadline: timestamp) -> uint256:
    return self.tokenToEthOutput(eth_bought, max_tokens, deadline, msg.sender, msg.sender)

# @notice Convert Tokens to ETH and transfers ETH to recipient.
# @dev User specifies maximum input and exact output.
# @param eth_bought Amount of ETH purchased.
# @param max_tokens Maximum Tokens sold.
# @param deadline Time after which this transaction can no longer be executed.
# @param recipient The address that receives output ETH.
# @return Amount of Tokens sold.
@public
def tokenToEthTransferOutput(eth_bought: uint256(wei), max_tokens: uint256, deadline: timestamp, recipient: address) -> uint256:
    assert recipient != self and recipient != ZERO_ADDRESS
    return self.tokenToEthOutput(eth_bought, max_tokens, deadline, msg.sender, recipient)

@private
def tokenToTokenInput(tokens_sold: uint256, min_tokens_bought: uint256, min_eth_bought: uint256(wei), deadline: timestamp, buyer: address, recipient: address, exchange_addr: address) -> uint256:
    assert (deadline >= block.timestamp and tokens_sold > 0) and (min_tokens_bought > 0 and min_eth_bought > 0)
    assert exchange_addr != self and exchange_addr != ZERO_ADDRESS
    token_reserve: uint256 = self.token.balanceOf(self)
    eth_bought: uint256 = self.getInputPrice(tokens_sold, token_reserve, as_unitless_number(self.balance))
    wei_bought: uint256(wei) = as_wei_value(eth_bought, 'wei')
    assert wei_bought >= min_eth_bought
    assert self.token.transferFrom(buyer, self, tokens_sold)
    tokens_bought: uint256 = Exchange(exchange_addr).ethToTokenTransferInput(min_tokens_bought, deadline, recipient, value=wei_bought)
    log.EthPurchase(buyer, tokens_sold, wei_bought)
    return tokens_bought

# @notice Convert Tokens (self.token) to Tokens (token_addr).
# @dev User specifies exact input and minimum output.
# @param tokens_sold Amount of Tokens sold.
# @param min_tokens_bought Minimum Tokens (token_addr) purchased.
# @param min_eth_bought Minimum ETH purchased as intermediary.
# @param deadline Time after which this transaction can no longer be executed.
# @param token_addr The address of the token being purchased.
# @return Amount of Tokens (token_addr) bought.
@public
def tokenToTokenSwapInput(tokens_sold: uint256, min_tokens_bought: uint256, min_eth_bought: uint256(wei), deadline: timestamp, token_addr: address) -> uint256:
    exchange_addr: address = self.factory.getExchange(token_addr)
    return self.tokenToTokenInput(tokens_sold, min_tokens_bought, min_eth_bought, deadline, msg.sender, msg.sender, exchange_addr)

# @notice Convert Tokens (self.token) to Tokens (token_addr) and transfers
#         Tokens (token_addr) to recipient.
# @dev User specifies exact input and minimum output.
# @param tokens_sold Amount of Tokens sold.
# @param min_tokens_bought Minimum Tokens (token_addr) purchased.
# @param min_eth_bought Minimum ETH purchased as intermediary.
# @param deadline Time after which this transaction can no longer be executed.
# @param recipient The address that receives output ETH.
# @param token_addr The address of the token being purchased.
# @return Amount of Tokens (token_addr) bought.
@public
def tokenToTokenTransferInput(tokens_sold: uint256, min_tokens_bought: uint256, min_eth_bought: uint256(wei), deadline: timestamp, recipient: address, token_addr: address) -> uint256:
    exchange_addr: address = self.factory.getExchange(token_addr)
    return self.tokenToTokenInput(tokens_sold, min_tokens_bought, min_eth_bought, deadline, msg.sender, recipient, exchange_addr)

@private
def tokenToTokenOutput(tokens_bought: uint256, max_tokens_sold: uint256, max_eth_sold: uint256(wei), deadline: timestamp, buyer: address, recipient: address, exchange_addr: address) -> uint256:
    assert deadline >= block.timestamp and (tokens_bought > 0 and max_eth_sold > 0)
    assert exchange_addr != self and exchange_addr != ZERO_ADDRESS
    eth_bought: uint256(wei) = Exchange(exchange_addr).getEthToTokenOutputPrice(tokens_bought)
    token_reserve: uint256 = self.token.balanceOf(self)
    tokens_sold: uint256 = self.getOutputPrice(as_unitless_number(eth_bought), token_reserve, as_unitless_number(self.balance))
    # tokens sold is always > 0
    assert max_tokens_sold >= tokens_sold and max_eth_sold >= eth_bought
    assert self.token.transferFrom(buyer, self, tokens_sold)
    eth_sold: uint256(wei) = Exchange(exchange_addr).ethToTokenTransferOutput(tokens_bought, deadline, recipient, value=eth_bought)
    log.EthPurchase(buyer, tokens_sold, eth_bought)
    return tokens_sold

# @notice Convert Tokens (self.token) to Tokens (token_addr).
# @dev User specifies maximum input and exact output.
# @param tokens_bought Amount of Tokens (token_addr) bought.
# @param max_tokens_sold Maximum Tokens (self.token) sold.
# @param max_eth_sold Maximum ETH purchased as intermediary.
# @param deadline Time after which this transaction can no longer be executed.
# @param token_addr The address of the token being purchased.
# @return Amount of Tokens (self.token) sold.
@public
def tokenToTokenSwapOutput(tokens_bought: uint256, max_tokens_sold: uint256, max_eth_sold: uint256(wei), deadline: timestamp, token_addr: address) -> uint256:
    exchange_addr: address = self.factory.getExchange(token_addr)
    return self.tokenToTokenOutput(tokens_bought, max_tokens_sold, max_eth_sold, deadline, msg.sender, msg.sender, exchange_addr)

# @notice Convert Tokens (self.token) to Tokens (token_addr) and transfers
#         Tokens (token_addr) to recipient.
# @dev User specifies maximum input and exact output.
# @param tokens_bought Amount of Tokens (token_addr) bought.
# @param max_tokens_sold Maximum Tokens (self.token) sold.
# @param max_eth_sold Maximum ETH purchased as intermediary.
# @param deadline Time after which this transaction can no longer be executed.
# @param recipient The address that receives output ETH.
# @param token_addr The address of the token being purchased.
# @return Amount of Tokens (self.token) sold.
@public
def tokenToTokenTransferOutput(tokens_bought: uint256, max_tokens_sold: uint256, max_eth_sold: uint256(wei), deadline: timestamp, recipient: address, token_addr: address) -> uint256:
    exchange_addr: address = self.factory.getExchange(token_addr)
    return self.tokenToTokenOutput(tokens_bought, max_tokens_sold, max_eth_sold, deadline, msg.sender, recipient, exchange_addr)

# @notice Convert Tokens (self.token) to Tokens (exchange_addr.token).
# @dev Allows trades through contracts that were not deployed from the same factory.
# @dev User specifies exact input and minimum output.
# @param tokens_sold Amount of Tokens sold.
# @param min_tokens_bought Minimum Tokens (token_addr) purchased.
# @param min_eth_bought Minimum ETH purchased as intermediary.
# @param deadline Time after which this transaction can no longer be executed.
# @param exchange_addr The address of the exchange for the token being purchased.
# @return Amount of Tokens (exchange_addr.token) bought.
@public
def tokenToExchangeSwapInput(tokens_sold: uint256, min_tokens_bought: uint256, min_eth_bought: uint256(wei), deadline: timestamp, exchange_addr: address) -> uint256:
    return self.tokenToTokenInput(tokens_sold, min_tokens_bought, min_eth_bought, deadline, msg.sender, msg.sender, exchange_addr)

# @notice Convert Tokens (self.token) to Tokens (exchange_addr.token) and transfers
#         Tokens (exchange_addr.token) to recipient.
# @dev Allows trades through contracts that were not deployed from the same factory.
# @dev User specifies exact input and minimum output.
# @param tokens_sold Amount of Tokens sold.
# @param min_tokens_bought Minimum Tokens (token_addr) purchased.
# @param min_eth_bought Minimum ETH purchased as intermediary.
# @param deadline Time after which this transaction can no longer be executed.
# @param recipient The address that receives output ETH.
# @param exchange_addr The address of the exchange for the token being purchased.
# @return Amount of Tokens (exchange_addr.token) bought.
@public
def tokenToExchangeTransferInput(tokens_sold: uint256, min_tokens_bought: uint256, min_eth_bought: uint256(wei), deadline: timestamp, recipient: address, exchange_addr: address) -> uint256:
    assert recipient != self
    return self.tokenToTokenInput(tokens_sold, min_tokens_bought, min_eth_bought, deadline, msg.sender, recipient, exchange_addr)

# @notice Convert Tokens (self.token) to Tokens (exchange_addr.token).
# @dev Allows trades through contracts that were not deployed from the same factory.
# @dev User specifies maximum input and exact output.
# @param tokens_bought Amount of Tokens (token_addr) bought.
# @param max_tokens_sold Maximum Tokens (self.token) sold.
# @param max_eth_sold Maximum ETH purchased as intermediary.
# @param deadline Time after which this transaction can no longer be executed.
# @param exchange_addr The address of the exchange for the token being purchased.
# @return Amount of Tokens (self.token) sold.
@public
def tokenToExchangeSwapOutput(tokens_bought: uint256, max_tokens_sold: uint256, max_eth_sold: uint256(wei), deadline: timestamp, exchange_addr: address) -> uint256:
    return self.tokenToTokenOutput(tokens_bought, max_tokens_sold, max_eth_sold, deadline, msg.sender, msg.sender, exchange_addr)

# @notice Convert Tokens (self.token) to Tokens (exchange_addr.token) and transfers
#         Tokens (exchange_addr.token) to recipient.
# @dev Allows trades through contracts that were not deployed from the same factory.
# @dev User specifies maximum input and exact output.
# @param tokens_bought Amount of Tokens (token_addr) bought.
# @param max_tokens_sold Maximum Tokens (self.token) sold.
# @param max_eth_sold Maximum ETH purchased as intermediary.
# @param deadline Time after which this transaction can no longer be executed.
# @param recipient The address that receives output ETH.
# @param token_addr The address of the token being purchased.
# @return Amount of Tokens (self.token) sold.
@public
def tokenToExchangeTransferOutput(tokens_bought: uint256, max_tokens_sold: uint256, max_eth_sold: uint256(wei), deadline: timestamp, recipient: address, exchange_addr: address) -> uint256:
    assert recipient != self
    return self.tokenToTokenOutput(tokens_bought, max_tokens_sold, max_eth_sold, deadline, msg.sender, recipient, exchange_addr)

# @notice Public price function for ETH to Token trades with an exact input.
# @param eth_sold Amount of ETH sold.
# @return Amount of Tokens that can be bought with input ETH.
@public
@constant
def getEthToTokenInputPrice(eth_sold: uint256(wei)) -> uint256:
    assert eth_sold > 0
    token_reserve: uint256 = self.token.balanceOf(self)
    return self.getInputPrice(as_unitless_number(eth_sold), as_unitless_number(self.balance), token_reserve)

# @notice Public price function for ETH to Token trades with an exact output.
# @param tokens_bought Amount of Tokens bought.
# @return Amount of ETH needed to buy output Tokens.
@public
@constant
def getEthToTokenOutputPrice(tokens_bought: uint256) -> uint256(wei):
    assert tokens_bought > 0
    token_reserve: uint256 = self.token.balanceOf(self)
    eth_sold: uint256 = self.getOutputPrice(tokens_bought, as_unitless_number(self.balance), token_reserve)
    return as_wei_value(eth_sold, 'wei')

# @notice Public price function for Token to ETH trades with an exact input.
# @param tokens_sold Amount of Tokens sold.
# @return Amount of ETH that can be bought with input Tokens.
@public
@constant
def getTokenToEthInputPrice(tokens_sold: uint256) -> uint256(wei):
    assert tokens_sold > 0
    token_reserve: uint256 = self.token.balanceOf(self)
    eth_bought: uint256 = self.getInputPrice(tokens_sold, token_reserve, as_unitless_number(self.balance))
    return as_wei_value(eth_bought, 'wei')

# @notice Public price function for Token to ETH trades with an exact output.
# @param eth_bought Amount of output ETH.
# @return Amount of Tokens needed to buy output ETH.
@public
@constant
def getTokenToEthOutputPrice(eth_bought: uint256(wei)) -> uint256:
    assert eth_bought > 0
    token_reserve: uint256 = self.token.balanceOf(self)
    return self.getOutputPrice(as_unitless_number(eth_bought), token_reserve, as_unitless_number(self.balance))

# @return Address of Token that is sold on this exchange.
@public
@constant
def tokenAddress() -> address:
    return self.token

# @return Address of factory that created this exchange.
@public
@constant
def factoryAddress() -> address(Factory):
    return self.factory

# ERC20 compatibility for exchange liquidity modified from
# https://github.com/ethereum/vyper/blob/master/examples/tokens/ERC20.vy
@public
@constant
def balanceOf(_owner : address) -> uint256:
    return self.balances[_owner]

@public
def transfer(_to : address, _value : uint256) -> bool:
    self.balances[msg.sender] -= _value
    self.balances[_to] += _value
    log.Transfer(msg.sender, _to, _value)
    return True

@public
def transferFrom(_from : address, _to : address, _value : uint256) -> bool:
    self.balances[_from] -= _value
    self.balances[_to] += _value
    self.allowances[_from][msg.sender] -= _value
    log.Transfer(_from, _to, _value)
    return True

@public
def approve(_spender : address, _value : uint256) -> bool:
    self.allowances[msg.sender][_spender] = _value
    log.Approval(msg.sender, _spender, _value)
    return True

@public
@constant
def allowance(_owner : address, _spender : address) -> uint256:
    return self.allowances[_owner][_spender]