// SPDX-License-Identifier: MIT
pragma solidity 0.8.8;

// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/draft-IERC20Permit.sol)

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}

// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC20/utils/SafeERC20.sol)

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    function safeTransfer(
        IERC20 token,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(
        IERC20 token,
        address from,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender) + value;
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            uint256 newAllowance = oldAllowance - value;
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
        }
    }

    function safePermit(
        IERC20Permit token,
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        uint256 nonceBefore = token.nonces(owner);
        token.permit(owner, spender, value, deadline, v, r, s);
        uint256 nonceAfter = token.nonces(owner);
        require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) {
            // Return data is optional
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) external returns (bool);
}

// https://github.com/Uniswap/permit2

/// @title SignatureTransfer
/// @notice Handles ERC20 token transfers through signature based actions
/// @dev Requires user's token approval on the Permit2 contract
interface ISignatureTransfer {

    /// @notice The token and amount details for a transfer signed in the permit transfer signature
    struct TokenPermissions {
        // ERC20 token address
        address token;
        // the maximum amount that can be spent
        uint256 amount;
    }

    /// @notice The signed permit message for a single token transfer
    struct PermitTransferFrom {
        TokenPermissions permitted;
        // a unique value for every token owner's signature to prevent signature replays
        uint256 nonce;
        // deadline on the permit signature
        uint256 deadline;
    }

    /// @notice Specifies the recipient address and amount for batched transfers.
    /// @dev Recipients and amounts correspond to the index of the signed token permissions array.
    /// @dev Reverts if the requested amount is greater than the permitted signed amount.
    struct SignatureTransferDetails {
        // recipient address
        address to;
        // spender requested amount
        uint256 requestedAmount;
    }

    /// @notice Used to reconstruct the signed permit message for multiple token transfers
    /// @dev Do not need to pass in spender address as it is required that it is msg.sender
    /// @dev Note that a user still signs over a spender address
    struct PermitBatchTransferFrom {
        // the tokens and corresponding amounts permitted for a transfer
        TokenPermissions[] permitted;
        // a unique value for every token owner's signature to prevent signature replays
        uint256 nonce;
        // deadline on the permit signature
        uint256 deadline;
    }
    /// @notice Transfers a token using a signed permit message
    /// @dev Reverts if the requested amount is greater than the permitted signed amount
    /// @param permit The permit data signed over by the owner
    /// @param owner The owner of the tokens to transfer
    /// @param transferDetails The spender's requested transfer details for the permitted token
    /// @param signature The signature to verify
    function permitTransferFrom(
        PermitTransferFrom memory permit,
        SignatureTransferDetails calldata transferDetails,
        address owner,
        bytes calldata signature
    ) external;

    /// @notice Transfers multiple tokens using a signed permit message
    /// @param permit The permit data signed over by the owner
    /// @param owner The owner of the tokens to transfer
    /// @param transferDetails Specifies the recipient and requested amount for the token transfer
    /// @param signature The signature to verify
    function permitTransferFrom(
        PermitBatchTransferFrom memory permit,
        SignatureTransferDetails[] calldata transferDetails,
        address owner,
        bytes calldata signature
    ) external;
}

// @dev interface for interacting with an Odos executor
interface IOdosExecutor {
  function executePath (
    bytes calldata bytecode,
    uint256[] memory inputAmount,
    address msgSender
  ) external payable;
}

/// @title Routing contract for Odos SOR
/// @author Semiotic AI
/// @notice Wrapper with security gaurentees around execution of arbitrary operations on user tokens
contract OdosRouterV2 is Ownable {
  using SafeERC20 for IERC20;

  /// @dev The zero address is uniquely used to represent eth since it is already
  /// recognized as an invalid ERC20, and due to its gas efficiency
  address constant _ETH = address(0);

  /// @dev Address list where addresses can be cached for use when reading from storage is cheaper
  // than reading from calldata. addressListStart is the storage slot of the first dynamic array element
  uint256 private constant addressListStart = 
    80084422859880547211683076133703299733277748156566366325829078699459944778998;
  address[] public addressList;

  // @dev constants for managing referrals and fees
  uint256 public constant REFERRAL_WITH_FEE_THRESHOLD = 1 << 31;
  uint256 public constant FEE_DENOM = 1e18;

  // @dev fee taken on multi-input and multi-output swaps instead of positive slippage
  uint256 public swapMultiFee;

  /// @dev Contains all information needed to describe the input and output for a swap
  struct permit2Info {
    address contractAddress;
    uint256 nonce;
    uint256 deadline;
    bytes signature;
  }
  /// @dev Contains all information needed to describe the input and output for a swap
  struct swapTokenInfo {
    address inputToken;
    uint256 inputAmount;
    address inputReceiver;
    address outputToken;
    uint256 outputQuote;
    uint256 outputMin;
    address outputReceiver;
  }
  /// @dev Contains all information needed to describe an intput token for swapMulti
  struct inputTokenInfo {
    address tokenAddress;
    uint256 amountIn;
    address receiver;
  }
  /// @dev Contains all information needed to describe an output token for swapMulti
  struct outputTokenInfo {
    address tokenAddress;
    uint256 relativeValue;
    address receiver;
  }
  // @dev event for swapping one token for another
  event Swap(
    address sender,
    uint256 inputAmount,
    address inputToken,
    uint256 amountOut,
    address outputToken,
    int256 slippage,
    uint32 referralCode
  );
  /// @dev event for swapping multiple input and/or output tokens
  event SwapMulti(
    address sender,
    uint256[] amountsIn,
    address[] tokensIn,
    uint256[] amountsOut,
    address[] tokensOut,
    uint32 referralCode
  );
  /// @dev Holds all information for a given referral
  struct referralInfo {
    uint64 referralFee;
    address beneficiary;
    bool registered;
  }
  /// @dev Register referral fee and information
  mapping(uint32 => referralInfo) public referralLookup;

  /// @dev Set the null referralCode as "Unregistered" with no additional fee
  constructor() {
    referralLookup[0].referralFee = 0;
    referralLookup[0].beneficiary = address(0);
    referralLookup[0].registered = true;

    swapMultiFee = 5e14;
  }
  /// @dev Must exist in order for contract to receive eth
  receive() external payable { }

  /// @notice Custom decoder to swap with compact calldata for efficient execution on L2s
  function swapCompact() 
    external
    payable
    returns (uint256)
  {
    swapTokenInfo memory tokenInfo;

    address executor;
    uint32 referralCode;
    bytes calldata pathDefinition;
    {
      address msgSender = msg.sender;

      assembly {
        // Define function to load in token address, either from calldata or from storage
        function getAddress(currPos) -> result, newPos {
          let inputPos := shr(240, calldataload(currPos))

          switch inputPos
          // Reserve the null address as a special case that can be specified with 2 null bytes
          case 0x0000 {
            newPos := add(currPos, 2)
          }
          // This case means that the address is encoded in the calldata directly following the code
          case 0x0001 {
            result := and(shr(80, calldataload(currPos)), 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF)
            newPos := add(currPos, 22)
          }
          // Otherwise we use the case to load in from the cached address list
          default {
            result := sload(add(addressListStart, sub(inputPos, 2)))
            newPos := add(currPos, 2)
          }
        }
        let result := 0
        let pos := 4

        // Load in the input and output token addresses
        result, pos := getAddress(pos)
        mstore(tokenInfo, result)

        result, pos := getAddress(pos)
        mstore(add(tokenInfo, 0x60), result)

        // Load in the input amount - a 0 byte means the full balance is to be used
        let inputAmountLength := shr(248, calldataload(pos))
        pos := add(pos, 1)

        if inputAmountLength {
          mstore(add(tokenInfo, 0x20), shr(mul(sub(32, inputAmountLength), 8), calldataload(pos)))
          pos := add(pos, inputAmountLength)
        }

        // Load in the quoted output amount
        let quoteAmountLength := shr(248, calldataload(pos))
        pos := add(pos, 1)

        let outputQuote := shr(mul(sub(32, quoteAmountLength), 8), calldataload(pos))
        mstore(add(tokenInfo, 0x80), outputQuote)
        pos := add(pos, quoteAmountLength)

        // Load the slippage tolerance and use to get the minimum output amount
        {
          let slippageTolerance := shr(232, calldataload(pos))
          mstore(add(tokenInfo, 0xA0), div(mul(outputQuote, sub(0xFFFFFF, slippageTolerance)), 0xFFFFFF))
        }
        pos := add(pos, 3)

        // Load in the executor address
        executor, pos := getAddress(pos)

        // Load in the destination to send the input to - Zero denotes the executor
        result, pos := getAddress(pos)
        if eq(result, 0) { result := executor }
        mstore(add(tokenInfo, 0x40), result)

        // Load in the destination to send the output to - Zero denotes msg.sender
        result, pos := getAddress(pos)
        if eq(result, 0) { result := msgSender }
        mstore(add(tokenInfo, 0xC0), result)

        // Load in the referralCode
        referralCode := shr(224, calldataload(pos))
        pos := add(pos, 4)

        // Set the offset and size for the pathDefinition portion of the msg.data
        pathDefinition.length := mul(shr(248, calldataload(pos)), 32)
        pathDefinition.offset := add(pos, 1)
      }
    }
    return _swapApproval(
      tokenInfo,
      pathDefinition,
      executor,
      referralCode
    );
  }
  /// @notice Externally facing interface for swapping two tokens
  /// @param tokenInfo All information about the tokens being swapped
  /// @param pathDefinition Encoded path definition for executor
  /// @param executor Address of contract that will execute the path
  /// @param referralCode referral code to specify the source of the swap
  function swap(
    swapTokenInfo memory tokenInfo,
    bytes calldata pathDefinition,
    address executor,
    uint32 referralCode
  )
    external
    payable
    returns (uint256 amountOut)
  {
    return _swapApproval(
      tokenInfo,
      pathDefinition,
      executor,
      referralCode
    );
  }

  /// @notice Internal function for initiating approval transfers
  /// @param tokenInfo All information about the tokens being swapped
  /// @param pathDefinition Encoded path definition for executor
  /// @param executor Address of contract that will execute the path
  /// @param referralCode referral code to specify the source of the swap
  function _swapApproval(
    swapTokenInfo memory tokenInfo,
    bytes calldata pathDefinition,
    address executor,
    uint32 referralCode
  )
    internal
    returns (uint256 amountOut)
  {
    if (tokenInfo.inputToken == _ETH) {
      // Support rebasing tokens by allowing the user to trade the entire balance
      if (tokenInfo.inputAmount == 0) {
        tokenInfo.inputAmount = msg.value;
      } else {
        require(msg.value == tokenInfo.inputAmount, "Wrong msg.value");
      }
    }
    else {
      // Support rebasing tokens by allowing the user to trade the entire balance
      if (tokenInfo.inputAmount == 0) {
        tokenInfo.inputAmount = IERC20(tokenInfo.inputToken).balanceOf(msg.sender);
      }
      IERC20(tokenInfo.inputToken).safeTransferFrom(
        msg.sender,
        tokenInfo.inputReceiver,
        tokenInfo.inputAmount
      );
    }
    return _swap(
      tokenInfo,
      pathDefinition,
      executor,
      referralCode
    );
  }

  /// @notice Externally facing interface for swapping two tokens
  /// @param permit2 All additional info for Permit2 transfers
  /// @param tokenInfo All information about the tokens being swapped
  /// @param pathDefinition Encoded path definition for executor
  /// @param executor Address of contract that will execute the path
  /// @param referralCode referral code to specify the source of the swap
  function swapPermit2(
    permit2Info memory permit2,
    swapTokenInfo memory tokenInfo,
    bytes calldata pathDefinition,
    address executor,
    uint32 referralCode
  )
    external
    returns (uint256 amountOut)
  {
    ISignatureTransfer(permit2.contractAddress).permitTransferFrom(
      ISignatureTransfer.PermitTransferFrom(
        ISignatureTransfer.TokenPermissions(
          tokenInfo.inputToken,
          tokenInfo.inputAmount
        ),
        permit2.nonce,
        permit2.deadline
      ),
      ISignatureTransfer.SignatureTransferDetails(
        tokenInfo.inputReceiver,
        tokenInfo.inputAmount
      ),
      msg.sender,
      permit2.signature
    );
    return _swap(
      tokenInfo,
      pathDefinition,
      executor,
      referralCode
    );
  }

  /// @notice contains the main logic for swapping one token for another
  /// Assumes input tokens have already been sent to their destinations and
  /// that msg.value is set to expected ETH input value, or 0 for ERC20 input
  /// @param tokenInfo All information about the tokens being swapped
  /// @param pathDefinition Encoded path definition for executor
  /// @param executor Address of contract that will execute the path
  /// @param referralCode referral code to specify the source of the swap
  function _swap(
    swapTokenInfo memory tokenInfo,
    bytes calldata pathDefinition,
    address executor,
    uint32 referralCode
  )
    internal
    returns (uint256 amountOut)
  {
    // Check for valid output specifications
    require(tokenInfo.outputMin <= tokenInfo.outputQuote, "Minimum greater than quote");
    require(tokenInfo.outputMin > 0, "Slippage limit too low");
    require(tokenInfo.inputToken != tokenInfo.outputToken, "Arbitrage not supported");

    uint256 balanceBefore = _universalBalance(tokenInfo.outputToken);

    // Delegate the execution of the path to the specified Odos Executor
    uint256[] memory amountsIn = new uint256[](1);
    amountsIn[0] = tokenInfo.inputAmount;

    IOdosExecutor(executor).executePath{value: msg.value}(pathDefinition, amountsIn, msg.sender);

    amountOut = _universalBalance(tokenInfo.outputToken) - balanceBefore;

    if (referralCode > REFERRAL_WITH_FEE_THRESHOLD) {
      referralInfo memory thisReferralInfo = referralLookup[referralCode];

      _universalTransfer(
        tokenInfo.outputToken,
        thisReferralInfo.beneficiary,
        amountOut * thisReferralInfo.referralFee * 8 / (FEE_DENOM * 10)
      );
      amountOut = amountOut * (FEE_DENOM - thisReferralInfo.referralFee) / FEE_DENOM;
    }
    int256 slippage = int256(amountOut) - int256(tokenInfo.outputQuote);
    if (slippage > 0) {
      amountOut = tokenInfo.outputQuote;
    }
    require(amountOut >= tokenInfo.outputMin, "Slippage Limit Exceeded");

    // Transfer out the final output to the end user
    _universalTransfer(tokenInfo.outputToken, tokenInfo.outputReceiver, amountOut);

    emit Swap(
      msg.sender,
      tokenInfo.inputAmount,
      tokenInfo.inputToken,
      amountOut,
      tokenInfo.outputToken,
      slippage,
      referralCode
    );
  }

  /// @notice Custom decoder to swapMulti with compact calldata for efficient execution on L2s
  function swapMultiCompact() 
    external
    payable
    returns (uint256[] memory amountsOut)
  {
    address executor;
    uint256 valueOutMin;

    inputTokenInfo[] memory inputs;
    outputTokenInfo[] memory outputs;

    uint256 pos = 6;
    {
      address msgSender = msg.sender;

      uint256 numInputs;
      uint256 numOutputs;

      assembly {
        numInputs := shr(248, calldataload(4))
        numOutputs := shr(248, calldataload(5))
      }
      inputs = new inputTokenInfo[](numInputs);
      outputs = new outputTokenInfo[](numOutputs);

      assembly {
        // Define function to load in token address, either from calldata or from storage
        function getAddress(currPos) -> result, newPos {
          let inputPos := shr(240, calldataload(currPos))

          switch inputPos
          // Reserve the null address as a special case that can be specified with 2 null bytes
          case 0x0000 {
            newPos := add(currPos, 2)
          }
          // This case means that the address is encoded in the calldata directly following the code
          case 0x0001 {
            result := and(shr(80, calldataload(currPos)), 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF)
            newPos := add(currPos, 22)
          }
          // Otherwise we use the case to load in from the cached address list
          default {
            result := sload(add(addressListStart, sub(inputPos, 2)))
            newPos := add(currPos, 2)
          }
        }
        executor, pos := getAddress(pos)

        // Load in the quoted output amount
        let outputMinAmountLength := shr(248, calldataload(pos))
        pos := add(pos, 1)

        valueOutMin := shr(mul(sub(32, outputMinAmountLength), 8), calldataload(pos))
        pos := add(pos, outputMinAmountLength)

        let result := 0
        let memPos := 0

        for { let element := 0 } lt(element, numInputs) { element := add(element, 1) }
        {
          memPos := mload(add(inputs, add(mul(element, 0x20), 0x20)))

          // Load in the token address
          result, pos := getAddress(pos)
          mstore(memPos, result)

          // Load in the input amount - a 0 byte means the full balance is to be used
          let inputAmountLength := shr(248, calldataload(pos))
          pos := add(pos, 1)

          if inputAmountLength {
             mstore(add(memPos, 0x20), shr(mul(sub(32, inputAmountLength), 8), calldataload(pos)))
            pos := add(pos, inputAmountLength)
          }
          result, pos := getAddress(pos)
          if eq(result, 0) { result := executor }

          mstore(add(memPos, 0x40), result)
        }
        for { let element := 0 } lt(element, numOutputs) { element := add(element, 1) }
        {
          memPos := mload(add(outputs, add(mul(element, 0x20), 0x20)))

          // Load in the token address
          result, pos := getAddress(pos)
          mstore(memPos, result)

          // Load in the quoted output amount
          let outputAmountLength := shr(248, calldataload(pos))
          pos := add(pos, 1)

          mstore(add(memPos, 0x20), shr(mul(sub(32, outputAmountLength), 8), calldataload(pos)))
          pos := add(pos, outputAmountLength)

          result, pos := getAddress(pos)
          if eq(result, 0) { result := msgSender }

          mstore(add(memPos, 0x40), result)
        }
      }
    }
    uint32 referralCode;
    bytes calldata pathDefinition;

    assembly {
      // Load in the referralCode
      referralCode := shr(224, calldataload(pos))
      pos := add(pos, 4)

      // Set the offset and size for the pathDefinition portion of the msg.data
      pathDefinition.length := mul(shr(248, calldataload(pos)), 32)
      pathDefinition.offset := add(pos, 1)
    }
    return _swapMultiApproval(
      inputs,
      outputs,
      valueOutMin,
      pathDefinition,
      executor,
      referralCode
    );
  }

  /// @notice Externally facing interface for swapping between two sets of tokens
  /// @param inputs list of input token structs for the path being executed
  /// @param outputs list of output token structs for the path being executed
  /// @param valueOutMin minimum amount of value out the user will accept
  /// @param pathDefinition Encoded path definition for executor
  /// @param executor Address of contract that will execute the path
  /// @param referralCode referral code to specify the source of the swap
  function swapMulti(
    inputTokenInfo[] memory inputs,
    outputTokenInfo[] memory outputs,
    uint256 valueOutMin,
    bytes calldata pathDefinition,
    address executor,
    uint32 referralCode
  )
    external
    payable
    returns (uint256[] memory amountsOut)
  {
    return _swapMultiApproval(
      inputs,
      outputs,
      valueOutMin,
      pathDefinition,
      executor,
      referralCode
    );
  }

  /// @notice Internal logic for swapping between two sets of tokens with approvals
  /// @param inputs list of input token structs for the path being executed
  /// @param outputs list of output token structs for the path being executed
  /// @param valueOutMin minimum amount of value out the user will accept
  /// @param pathDefinition Encoded path definition for executor
  /// @param executor Address of contract that will execute the path
  /// @param referralCode referral code to specify the source of the swap
  function _swapMultiApproval(
    inputTokenInfo[] memory inputs,
    outputTokenInfo[] memory outputs,
    uint256 valueOutMin,
    bytes calldata pathDefinition,
    address executor,
    uint32 referralCode
  )
    internal
    returns (uint256[] memory amountsOut)
  {
    // If input amount is still 0 then that means the maximum possible input is to be used
    uint256 expected_msg_value = 0;

    for (uint256 i = 0; i < inputs.length; i++) {
      if (inputs[i].tokenAddress == _ETH) {
        if (inputs[i].amountIn == 0) {
          inputs[i].amountIn = msg.value;
        }
        expected_msg_value = inputs[i].amountIn;
      } 
      else {
        if (inputs[i].amountIn == 0) {
          inputs[i].amountIn = IERC20(inputs[i].tokenAddress).balanceOf(msg.sender);
        }
        IERC20(inputs[i].tokenAddress).safeTransferFrom(
          msg.sender,
          inputs[i].receiver,
          inputs[i].amountIn
        );
      }
    }
    require(msg.value == expected_msg_value, "Wrong msg.value");

    return _swapMulti(
      inputs,
      outputs,
      valueOutMin,
      pathDefinition,
      executor,
      referralCode
    );
  }

  /// @notice Externally facing interface for swapping between two sets of tokens with Permit2
  /// @param permit2 All additional info for Permit2 transfers
  /// @param inputs list of input token structs for the path being executed
  /// @param outputs list of output token structs for the path being executed
  /// @param valueOutMin minimum amount of value out the user will accept
  /// @param pathDefinition Encoded path definition for executor
  /// @param executor Address of contract that will execute the path
  /// @param referralCode referral code to specify the source of the swap
  function swapMultiPermit2(
    permit2Info memory permit2,
    inputTokenInfo[] memory inputs,
    outputTokenInfo[] memory outputs,
    uint256 valueOutMin,
    bytes calldata pathDefinition,
    address executor,
    uint32 referralCode
  )
    external
    payable
    returns (uint256[] memory amountsOut)
  {
    ISignatureTransfer.PermitBatchTransferFrom memory permit;
    ISignatureTransfer.SignatureTransferDetails[] memory transferDetails;
    {
      uint256 permit_length = msg.value > 0 ? inputs.length - 1 : inputs.length;

      permit = ISignatureTransfer.PermitBatchTransferFrom(
        new ISignatureTransfer.TokenPermissions[](permit_length),
        permit2.nonce,
        permit2.deadline
      );
      transferDetails = 
        new ISignatureTransfer.SignatureTransferDetails[](permit_length);
    }
    {
      uint256 expected_msg_value = 0;
      for (uint256 i = 0; i < inputs.length; i++) {

        if (inputs[i].tokenAddress == _ETH) {
          if (inputs[i].amountIn == 0) {
            inputs[i].amountIn = msg.value;
          }
          expected_msg_value = inputs[i].amountIn;
        }
        else {
          if (inputs[i].amountIn == 0) {
            inputs[i].amountIn = IERC20(inputs[i].tokenAddress).balanceOf(msg.sender);
          }
          uint256 permit_index = expected_msg_value == 0 ? i : i - 1;

          permit.permitted[permit_index].token = inputs[i].tokenAddress;
          permit.permitted[permit_index].amount = inputs[i].amountIn;

          transferDetails[permit_index].to = inputs[i].receiver;
          transferDetails[permit_index].requestedAmount = inputs[i].amountIn;
        }
      }
      require(msg.value == expected_msg_value, "Wrong msg.value");
    }
    ISignatureTransfer(permit2.contractAddress).permitTransferFrom(
      permit,
      transferDetails,
      msg.sender,
      permit2.signature
    );
    return _swapMulti(
      inputs,
      outputs,
      valueOutMin,
      pathDefinition,
      executor,
      referralCode
    );
  }

  /// @notice contains the main logic for swapping between two sets of tokens
  /// assumes that inputs have already been sent to the right location and msg.value
  /// is set correctly to be 0 for no native input and match native inpuit otherwise
  /// @param inputs list of input token structs for the path being executed
  /// @param outputs list of output token structs for the path being executed
  /// @param valueOutMin minimum amount of value out the user will accept
  /// @param pathDefinition Encoded path definition for executor
  /// @param executor Address of contract that will execute the path
  /// @param referralCode referral code to specify the source of the swap
  function _swapMulti(
    inputTokenInfo[] memory inputs,
    outputTokenInfo[] memory outputs,
    uint256 valueOutMin,
    bytes calldata pathDefinition,
    address executor,
    uint32 referralCode
  )
    internal
    returns (uint256[] memory amountsOut)
  {
    // Check for valid output specifications
    require(valueOutMin > 0, "Slippage limit too low");

    // Extract arrays of input amount values and tokens from the inputs struct list
    uint256[] memory amountsIn = new uint256[](inputs.length);
    address[] memory tokensIn = new address[](inputs.length);

    // Check input specification validity and transfer input tokens to executor
    {
      for (uint256 i = 0; i < inputs.length; i++) {

        amountsIn[i] = inputs[i].amountIn;
        tokensIn[i] = inputs[i].tokenAddress;

        for (uint256 j = 0; j < i; j++) {
          require(
            inputs[i].tokenAddress != inputs[j].tokenAddress,
            "Duplicate source tokens"
          );
        }
        for (uint256 j = 0; j < outputs.length; j++) {
          require(
            inputs[i].tokenAddress != outputs[j].tokenAddress,
            "Arbitrage not supported"
          );
        }
      }
    }
    // Check outputs for duplicates and record balances before swap
    uint256[] memory balancesBefore = new uint256[](outputs.length);
    for (uint256 i = 0; i < outputs.length; i++) {
      for (uint256 j = 0; j < i; j++) {
        require(
          outputs[i].tokenAddress != outputs[j].tokenAddress,
          "Duplicate destination tokens"
        );
      }
      balancesBefore[i] = _universalBalance(outputs[i].tokenAddress);
    }
    // Delegate the execution of the path to the specified Odos Executor
    IOdosExecutor(executor).executePath{value: msg.value}(pathDefinition, amountsIn, msg.sender);

    referralInfo memory thisReferralInfo;
    if (referralCode > REFERRAL_WITH_FEE_THRESHOLD) {
      thisReferralInfo = referralLookup[referralCode];
    }

    {
      uint256 valueOut;
      uint256 _swapMultiFee = swapMultiFee;
      amountsOut = new uint256[](outputs.length);

      for (uint256 i = 0; i < outputs.length; i++) {
        // Record the destination token balance before the path is executed
        amountsOut[i] = _universalBalance(outputs[i].tokenAddress) - balancesBefore[i];

        // Remove the swapMulti Fee (taken instead of positive slippage)
        amountsOut[i] = amountsOut[i] * (FEE_DENOM - _swapMultiFee) / FEE_DENOM;

        if (referralCode > REFERRAL_WITH_FEE_THRESHOLD) {
          _universalTransfer(
            outputs[i].tokenAddress,
            thisReferralInfo.beneficiary,
            amountsOut[i] * thisReferralInfo.referralFee * 8 / (FEE_DENOM * 10)
          );
          amountsOut[i] = amountsOut[i] * (FEE_DENOM - thisReferralInfo.referralFee) / FEE_DENOM;
        }
        _universalTransfer(
          outputs[i].tokenAddress,
          outputs[i].receiver,
          amountsOut[i]
        );
        // Add the amount out sent to the user to the total value of output
        valueOut += amountsOut[i] * outputs[i].relativeValue;
      }
      require(valueOut >= valueOutMin, "Slippage Limit Exceeded");
    }
    address[] memory tokensOut = new address[](outputs.length);
    for (uint256 i = 0; i < outputs.length; i++) {
        tokensOut[i] = outputs[i].tokenAddress;
    }
    emit SwapMulti(
      msg.sender,
      amountsIn,
      tokensIn,
      amountsOut,
      tokensOut,
      referralCode
    );
  }

  /// @notice Register a new referrer, optionally with an additional swap fee
  /// @param _referralCode the referral code to use for the new referral
  /// @param _referralFee the additional fee to add to each swap using this code
  /// @param _beneficiary the address to send the referral's share of fees to
  function registerReferralCode(
    uint32 _referralCode,
    uint64 _referralFee,
    address _beneficiary
  )
    external
  {
    // Do not allow for any overwriting of referral codes
    require(!referralLookup[_referralCode].registered, "Code in use");

    // Maximum additional fee a referral can set is 2%
    require(_referralFee <= FEE_DENOM / 50, "Fee too high");

    // Reserve the lower half of referral codes to be informative only
    if (_referralCode <= REFERRAL_WITH_FEE_THRESHOLD) {
      require(_referralFee == 0, "Invalid fee for code");
    } else {
      require(_referralFee > 0, "Invalid fee for code");

      // Make sure the beneficiary is not the null address if there is a fee
      require(_beneficiary != address(0), "Null beneficiary");
    }
    referralLookup[_referralCode].referralFee = _referralFee;
    referralLookup[_referralCode].beneficiary = _beneficiary;
    referralLookup[_referralCode].registered = true;
  }

  /// @notice Set the fee used for swapMulti
  /// @param _swapMultiFee the new fee for swapMulti
  function setSwapMultiFee(
    uint256 _swapMultiFee
  ) 
    external
    onlyOwner
  {
    // Maximum swapMultiFee that can be set is 0.5%
    require(_swapMultiFee <= FEE_DENOM / 200, "Fee too high");
    swapMultiFee = _swapMultiFee;
  }

  /// @notice Push new addresses to the cached address list for when storage is cheaper than calldata
  /// @param addresses list of addresses to be added to the cached address list
  function writeAddressList(
    address[] calldata addresses
  ) 
    external
    onlyOwner
  {
    for (uint256 i = 0; i < addresses.length; i++) {
      addressList.push(addresses[i]);
    }
  }

  /// @notice Allows the owner to transfer funds held by the router contract
  /// @param tokens List of token address to be transferred
  /// @param amounts List of amounts of each token to be transferred
  /// @param dest Address to which the funds should be sent
  function transferRouterFunds(
    address[] calldata tokens,
    uint256[] calldata amounts,
    address dest
  )
    external
    onlyOwner
  {
    require(tokens.length == amounts.length, "Invalid funds transfer");
    for (uint256 i = 0; i < tokens.length; i++) {
      _universalTransfer(
        tokens[i], 
        dest, 
        amounts[i] == 0 ? _universalBalance(tokens[i]) : amounts[i]
      );
    }
  }
  /// @notice Directly swap funds held in router 
  /// @param inputs list of input token structs for the path being executed
  /// @param outputs list of output token structs for the path being executed
  /// @param valueOutMin minimum amount of value out the user will accept
  /// @param pathDefinition Encoded path definition for executor
  /// @param executor Address of contract that will execute the path
  function swapRouterFunds(
    inputTokenInfo[] memory inputs,
    outputTokenInfo[] memory outputs,
    uint256 valueOutMin,
    bytes calldata pathDefinition,
    address executor
  )
    external
    onlyOwner
    returns (uint256[] memory amountsOut)
  {
    uint256[] memory amountsIn = new uint256[](inputs.length);
    address[] memory tokensIn = new address[](inputs.length);

    for (uint256 i = 0; i < inputs.length; i++) {
      tokensIn[i] = inputs[i].tokenAddress;

      amountsIn[i] = inputs[i].amountIn == 0 ? 
        _universalBalance(tokensIn[i]) : inputs[i].amountIn;

      _universalTransfer(
        tokensIn[i],
        inputs[i].receiver,
        amountsIn[i]
      );
    }
    // Check outputs for duplicates and record balances before swap
    uint256[] memory balancesBefore = new uint256[](outputs.length);
    address[] memory tokensOut = new address[](outputs.length);
    for (uint256 i = 0; i < outputs.length; i++) {
      tokensOut[i] = outputs[i].tokenAddress;
      balancesBefore[i] = _universalBalance(tokensOut[i]);
    }
    // Delegate the execution of the path to the specified Odos Executor
    IOdosExecutor(executor).executePath{value: 0}(pathDefinition, amountsIn, msg.sender);

    uint256 valueOut;
    amountsOut = new uint256[](outputs.length);
    for (uint256 i = 0; i < outputs.length; i++) {

      // Record the destination token balance before the path is executed
      amountsOut[i] = _universalBalance(tokensOut[i]) - balancesBefore[i];

      _universalTransfer(
        outputs[i].tokenAddress,
        outputs[i].receiver,
        amountsOut[i]
      );
      // Add the amount out sent to the user to the total value of output
      valueOut += amountsOut[i] * outputs[i].relativeValue;
    }
    require(valueOut >= valueOutMin, "Slippage Limit Exceeded");

    emit SwapMulti(
      msg.sender,
      amountsIn,
      tokensIn,
      amountsOut,
      tokensOut,
      0
    );
  }
  /// @notice helper function to get balance of ERC20 or native coin for this contract
  /// @param token address of the token to check, null for native coin
  /// @return balance of specified coin or token
  function _universalBalance(address token) private view returns(uint256) {
    if (token == _ETH) {
      return address(this).balance;
    } else {
      return IERC20(token).balanceOf(address(this));
    }
  }
  /// @notice helper function to transfer ERC20 or native coin
  /// @param token address of the token being transferred, null for native coin
  /// @param to address to transfer to
  /// @param amount to transfer
  function _universalTransfer(address token, address to, uint256 amount) private {
    if (token == _ETH) {
      (bool success,) = payable(to).call{value: amount}("");
      require(success, "ETH transfer failed");
    } else {
      IERC20(token).safeTransfer(to, amount);
    }
  }
}

// File: contracts/common/UnstructuredStorage.sol

/*
 * SPDX-License-Identitifer:    MIT
 */

pragma solidity ^0.4.24;


library UnstructuredStorage {
    function getStorageBool(bytes32 position) internal view returns (bool data) {
        assembly { data := sload(position) }
    }

    function getStorageAddress(bytes32 position) internal view returns (address data) {
        assembly { data := sload(position) }
    }

    function getStorageBytes32(bytes32 position) internal view returns (bytes32 data) {
        assembly { data := sload(position) }
    }

    function getStorageUint256(bytes32 position) internal view returns (uint256 data) {
        assembly { data := sload(position) }
    }

    function setStorageBool(bytes32 position, bool data) internal {
        assembly { sstore(position, data) }
    }

    function setStorageAddress(bytes32 position, address data) internal {
        assembly { sstore(position, data) }
    }

    function setStorageBytes32(bytes32 position, bytes32 data) internal {
        assembly { sstore(position, data) }
    }

    function setStorageUint256(bytes32 position, uint256 data) internal {
        assembly { sstore(position, data) }
    }
}

// File: contracts/acl/IACL.sol

/*
 * SPDX-License-Identitifer:    MIT
 */

pragma solidity ^0.4.24;


interface IACL {
    function initialize(address permissionsCreator) external;

    // TODO: this should be external
    // See https://github.com/ethereum/solidity/issues/4832
    function hasPermission(address who, address where, bytes32 what, bytes how) public view returns (bool);
}

// File: contracts/common/IVaultRecoverable.sol

/*
 * SPDX-License-Identitifer:    MIT
 */

pragma solidity ^0.4.24;


interface IVaultRecoverable {
    event RecoverToVault(address indexed vault, address indexed token, uint256 amount);

    function transferToVault(address token) external;

    function allowRecoverability(address token) external view returns (bool);
    function getRecoveryVault() external view returns (address);
}

// File: contracts/kernel/IKernel.sol

/*
 * SPDX-License-Identitifer:    MIT
 */

pragma solidity ^0.4.24;




interface IKernelEvents {
    event SetApp(bytes32 indexed namespace, bytes32 indexed appId, address app);
}


// This should be an interface, but interfaces can't inherit yet :(
contract IKernel is IKernelEvents, IVaultRecoverable {
    function acl() public view returns (IACL);
    function hasPermission(address who, address where, bytes32 what, bytes how) public view returns (bool);

    function setApp(bytes32 namespace, bytes32 appId, address app) public;
    function getApp(bytes32 namespace, bytes32 appId) public view returns (address);
}

// File: contracts/apps/AppStorage.sol

/*
 * SPDX-License-Identitifer:    MIT
 */

pragma solidity ^0.4.24;




contract AppStorage {
    using UnstructuredStorage for bytes32;

    /* Hardcoded constants to save gas
    bytes32 internal constant KERNEL_POSITION = keccak256("aragonOS.appStorage.kernel");
    bytes32 internal constant APP_ID_POSITION = keccak256("aragonOS.appStorage.appId");
    */
    bytes32 internal constant KERNEL_POSITION = 0x4172f0f7d2289153072b0a6ca36959e0cbe2efc3afe50fc81636caa96338137b;
    bytes32 internal constant APP_ID_POSITION = 0xd625496217aa6a3453eecb9c3489dc5a53e6c67b444329ea2b2cbc9ff547639b;

    function kernel() public view returns (IKernel) {
        return IKernel(KERNEL_POSITION.getStorageAddress());
    }

    function appId() public view returns (bytes32) {
        return APP_ID_POSITION.getStorageBytes32();
    }

    function setKernel(IKernel _kernel) internal {
        KERNEL_POSITION.setStorageAddress(address(_kernel));
    }

    function setAppId(bytes32 _appId) internal {
        APP_ID_POSITION.setStorageBytes32(_appId);
    }
}

// File: contracts/common/IsContract.sol

/*
 * SPDX-License-Identitifer:    MIT
 */

pragma solidity ^0.4.24;


contract IsContract {
    /*
    * NOTE: this should NEVER be used for authentication
    * (see pitfalls: https://github.com/fergarrui/ethereum-security/tree/master/contracts/extcodesize).
    *
    * This is only intended to be used as a sanity check that an address is actually a contract,
    * RATHER THAN an address not being a contract.
    */
    function isContract(address _target) internal view returns (bool) {
        if (_target == address(0)) {
            return false;
        }

        uint256 size;
        assembly { size := extcodesize(_target) }
        return size > 0;
    }
}

// File: contracts/lib/misc/ERCProxy.sol

/*
 * SPDX-License-Identitifer:    MIT
 */

pragma solidity ^0.4.24;


contract ERCProxy {
    uint256 internal constant FORWARDING = 1;
    uint256 internal constant UPGRADEABLE = 2;

    function proxyType() public pure returns (uint256 proxyTypeId);
    function implementation() public view returns (address codeAddr);
}

// File: contracts/common/DelegateProxy.sol

pragma solidity 0.4.24;




contract DelegateProxy is ERCProxy, IsContract {
    uint256 internal constant FWD_GAS_LIMIT = 10000;

    /**
    * @dev Performs a delegatecall and returns whatever the delegatecall returned (entire context execution will return!)
    * @param _dst Destination address to perform the delegatecall
    * @param _calldata Calldata for the delegatecall
    */
    function delegatedFwd(address _dst, bytes _calldata) internal {
        require(isContract(_dst));
        uint256 fwdGasLimit = FWD_GAS_LIMIT;

        assembly {
            let result := delegatecall(sub(gas, fwdGasLimit), _dst, add(_calldata, 0x20), mload(_calldata), 0, 0)
            let size := returndatasize
            let ptr := mload(0x40)
            returndatacopy(ptr, 0, size)

            // revert instead of invalid() bc if the underlying call failed with invalid() it already wasted gas.
            // if the call returned error data, forward it
            switch result case 0 { revert(ptr, size) }
            default { return(ptr, size) }
        }
    }
}

// File: contracts/common/DepositableStorage.sol

pragma solidity 0.4.24;



contract DepositableStorage {
    using UnstructuredStorage for bytes32;

    // keccak256("aragonOS.depositableStorage.depositable")
    bytes32 internal constant DEPOSITABLE_POSITION = 0x665fd576fbbe6f247aff98f5c94a561e3f71ec2d3c988d56f12d342396c50cea;

    function isDepositable() public view returns (bool) {
        return DEPOSITABLE_POSITION.getStorageBool();
    }

    function setDepositable(bool _depositable) internal {
        DEPOSITABLE_POSITION.setStorageBool(_depositable);
    }
}

// File: contracts/common/DepositableDelegateProxy.sol

pragma solidity 0.4.24;




contract DepositableDelegateProxy is DepositableStorage, DelegateProxy {
    event ProxyDeposit(address sender, uint256 value);

    function () external payable {
        uint256 forwardGasThreshold = FWD_GAS_LIMIT;
        bytes32 isDepositablePosition = DEPOSITABLE_POSITION;

        // Optimized assembly implementation to prevent EIP-1884 from breaking deposits, reference code in Solidity:
        // https://github.com/aragon/aragonOS/blob/v4.2.1/contracts/common/DepositableDelegateProxy.sol#L10-L20
        assembly {
            // Continue only if the gas left is lower than the threshold for forwarding to the implementation code,
            // otherwise continue outside of the assembly block.
            if lt(gas, forwardGasThreshold) {
                // Only accept the deposit and emit an event if all of the following are true:
                // the proxy accepts deposits (isDepositable), msg.data.length == 0, and msg.value > 0
                if and(and(sload(isDepositablePosition), iszero(calldatasize)), gt(callvalue, 0)) {
                    // Equivalent Solidity code for emitting the event:
                    // emit ProxyDeposit(msg.sender, msg.value);

                    let logData := mload(0x40) // free memory pointer
                    mstore(logData, caller) // add 'msg.sender' to the log data (first event param)
                    mstore(add(logData, 0x20), callvalue) // add 'msg.value' to the log data (second event param)

                    // Emit an event with one topic to identify the event: keccak256('ProxyDeposit(address,uint256)') = 0x15ee...dee1
                    log1(logData, 0x40, 0x15eeaa57c7bd188c1388020bcadc2c436ec60d647d36ef5b9eb3c742217ddee1)

                    stop() // Stop. Exits execution context
                }

                // If any of above checks failed, revert the execution (if ETH was sent, it is returned to the sender)
                revert(0, 0)
            }
        }

        address target = implementation();
        delegatedFwd(target, msg.data);
    }
}

// File: contracts/kernel/KernelConstants.sol

/*
 * SPDX-License-Identitifer:    MIT
 */

pragma solidity ^0.4.24;


contract KernelAppIds {
    /* Hardcoded constants to save gas
    bytes32 internal constant KERNEL_CORE_APP_ID = apmNamehash("kernel");
    bytes32 internal constant KERNEL_DEFAULT_ACL_APP_ID = apmNamehash("acl");
    bytes32 internal constant KERNEL_DEFAULT_VAULT_APP_ID = apmNamehash("vault");
    */
    bytes32 internal constant KERNEL_CORE_APP_ID = 0x3b4bf6bf3ad5000ecf0f989d5befde585c6860fea3e574a4fab4c49d1c177d9c;
    bytes32 internal constant KERNEL_DEFAULT_ACL_APP_ID = 0xe3262375f45a6e2026b7e7b18c2b807434f2508fe1a2a3dfb493c7df8f4aad6a;
    bytes32 internal constant KERNEL_DEFAULT_VAULT_APP_ID = 0x7e852e0fcfce6551c13800f1e7476f982525c2b5277ba14b24339c68416336d1;
}


contract KernelNamespaceConstants {
    /* Hardcoded constants to save gas
    bytes32 internal constant KERNEL_CORE_NAMESPACE = keccak256("core");
    bytes32 internal constant KERNEL_APP_BASES_NAMESPACE = keccak256("base");
    bytes32 internal constant KERNEL_APP_ADDR_NAMESPACE = keccak256("app");
    */
    bytes32 internal constant KERNEL_CORE_NAMESPACE = 0xc681a85306374a5ab27f0bbc385296a54bcd314a1948b6cf61c4ea1bc44bb9f8;
    bytes32 internal constant KERNEL_APP_BASES_NAMESPACE = 0xf1f3eb40f5bc1ad1344716ced8b8a0431d840b5783aea1fd01786bc26f35ac0f;
    bytes32 internal constant KERNEL_APP_ADDR_NAMESPACE = 0xd6f028ca0e8edb4a8c9757ca4fdccab25fa1e0317da1188108f7d2dee14902fb;
}

// File: contracts/apps/AppProxyBase.sol

pragma solidity 0.4.24;






contract AppProxyBase is AppStorage, DepositableDelegateProxy, KernelNamespaceConstants {
    /**
    * @dev Initialize AppProxy
    * @param _kernel Reference to organization kernel for the app
    * @param _appId Identifier for app
    * @param _initializePayload Payload for call to be made after setup to initialize
    */
    constructor(IKernel _kernel, bytes32 _appId, bytes _initializePayload) public {
        setKernel(_kernel);
        setAppId(_appId);

        // Implicit check that kernel is actually a Kernel
        // The EVM doesn't actually provide a way for us to make sure, but we can force a revert to
        // occur if the kernel is set to 0x0 or a non-code address when we try to call a method on
        // it.
        address appCode = getAppBase(_appId);

        // If initialize payload is provided, it will be executed
        if (_initializePayload.length > 0) {
            require(isContract(appCode));
            // Cannot make delegatecall as a delegateproxy.delegatedFwd as it
            // returns ending execution context and halts contract deployment
            require(appCode.delegatecall(_initializePayload));
        }
    }

    function getAppBase(bytes32 _appId) internal view returns (address) {
        return kernel().getApp(KERNEL_APP_BASES_NAMESPACE, _appId);
    }
}

// File: contracts/apps/AppProxyUpgradeable.sol

pragma solidity 0.4.24;



contract AppProxyUpgradeable is AppProxyBase {
    /**
    * @dev Initialize AppProxyUpgradeable (makes it an upgradeable Aragon app)
    * @param _kernel Reference to organization kernel for the app
    * @param _appId Identifier for app
    * @param _initializePayload Payload for call to be made after setup to initialize
    */
    constructor(IKernel _kernel, bytes32 _appId, bytes _initializePayload)
        AppProxyBase(_kernel, _appId, _initializePayload)
        public // solium-disable-line visibility-first
    {
        // solium-disable-previous-line no-empty-blocks
    }

    /**
     * @dev ERC897, the address the proxy would delegate calls to
     */
    function implementation() public view returns (address) {
        return getAppBase(appId());
    }

    /**
     * @dev ERC897, whether it is a forwarding (1) or an upgradeable (2) proxy
     */
    function proxyType() public pure returns (uint256 proxyTypeId) {
        return UPGRADEABLE;
    }
}

/**
 *Submitted for verification at Etherscan.io on 2020-02-06
*/

// File: contracts/acl/IACL.sol

/*
 * SPDX-License-Identifier:    MIT
 */

pragma solidity ^0.4.24;


interface IACL {
    function initialize(address permissionsCreator) external;

    // TODO: this should be external
    // See https://github.com/ethereum/solidity/issues/4832
    function hasPermission(address who, address where, bytes32 what, bytes how) public view returns (bool);
}

// File: contracts/common/IVaultRecoverable.sol

/*
 * SPDX-License-Identifier:    MIT
 */

pragma solidity ^0.4.24;


interface IVaultRecoverable {
    event RecoverToVault(address indexed vault, address indexed token, uint256 amount);

    function transferToVault(address token) external;

    function allowRecoverability(address token) external view returns (bool);
    function getRecoveryVault() external view returns (address);
}

// File: contracts/kernel/IKernel.sol

/*
 * SPDX-License-Identifier:    MIT
 */

pragma solidity ^0.4.24;




interface IKernelEvents {
    event SetApp(bytes32 indexed namespace, bytes32 indexed appId, address app);
}


// This should be an interface, but interfaces can't inherit yet :(
contract IKernel is IKernelEvents, IVaultRecoverable {
    function acl() public view returns (IACL);
    function hasPermission(address who, address where, bytes32 what, bytes how) public view returns (bool);

    function setApp(bytes32 namespace, bytes32 appId, address app) public;
    function getApp(bytes32 namespace, bytes32 appId) public view returns (address);
}

// File: contracts/kernel/KernelConstants.sol

/*
 * SPDX-License-Identifier:    MIT
 */

pragma solidity ^0.4.24;


contract KernelAppIds {
    /* Hardcoded constants to save gas
    bytes32 internal constant KERNEL_CORE_APP_ID = apmNamehash("kernel");
    bytes32 internal constant KERNEL_DEFAULT_ACL_APP_ID = apmNamehash("acl");
    bytes32 internal constant KERNEL_DEFAULT_VAULT_APP_ID = apmNamehash("vault");
    */
    bytes32 internal constant KERNEL_CORE_APP_ID = 0x3b4bf6bf3ad5000ecf0f989d5befde585c6860fea3e574a4fab4c49d1c177d9c;
    bytes32 internal constant KERNEL_DEFAULT_ACL_APP_ID = 0xe3262375f45a6e2026b7e7b18c2b807434f2508fe1a2a3dfb493c7df8f4aad6a;
    bytes32 internal constant KERNEL_DEFAULT_VAULT_APP_ID = 0x7e852e0fcfce6551c13800f1e7476f982525c2b5277ba14b24339c68416336d1;
}


contract KernelNamespaceConstants {
    /* Hardcoded constants to save gas
    bytes32 internal constant KERNEL_CORE_NAMESPACE = keccak256("core");
    bytes32 internal constant KERNEL_APP_BASES_NAMESPACE = keccak256("base");
    bytes32 internal constant KERNEL_APP_ADDR_NAMESPACE = keccak256("app");
    */
    bytes32 internal constant KERNEL_CORE_NAMESPACE = 0xc681a85306374a5ab27f0bbc385296a54bcd314a1948b6cf61c4ea1bc44bb9f8;
    bytes32 internal constant KERNEL_APP_BASES_NAMESPACE = 0xf1f3eb40f5bc1ad1344716ced8b8a0431d840b5783aea1fd01786bc26f35ac0f;
    bytes32 internal constant KERNEL_APP_ADDR_NAMESPACE = 0xd6f028ca0e8edb4a8c9757ca4fdccab25fa1e0317da1188108f7d2dee14902fb;
}

// File: contracts/kernel/KernelStorage.sol

pragma solidity 0.4.24;


contract KernelStorage {
    // namespace => app id => address
    mapping (bytes32 => mapping (bytes32 => address)) public apps;
    bytes32 public recoveryVaultAppId;
}

// File: contracts/acl/ACLSyntaxSugar.sol

/*
 * SPDX-License-Identifier:    MIT
 */

pragma solidity ^0.4.24;


contract ACLSyntaxSugar {
    function arr() internal pure returns (uint256[]) {
        return new uint256[](0);
    }

    function arr(bytes32 _a) internal pure returns (uint256[] r) {
        return arr(uint256(_a));
    }

    function arr(bytes32 _a, bytes32 _b) internal pure returns (uint256[] r) {
        return arr(uint256(_a), uint256(_b));
    }

    function arr(address _a) internal pure returns (uint256[] r) {
        return arr(uint256(_a));
    }

    function arr(address _a, address _b) internal pure returns (uint256[] r) {
        return arr(uint256(_a), uint256(_b));
    }

    function arr(address _a, uint256 _b, uint256 _c) internal pure returns (uint256[] r) {
        return arr(uint256(_a), _b, _c);
    }

    function arr(address _a, uint256 _b, uint256 _c, uint256 _d) internal pure returns (uint256[] r) {
        return arr(uint256(_a), _b, _c, _d);
    }

    function arr(address _a, uint256 _b) internal pure returns (uint256[] r) {
        return arr(uint256(_a), uint256(_b));
    }

    function arr(address _a, address _b, uint256 _c, uint256 _d, uint256 _e) internal pure returns (uint256[] r) {
        return arr(uint256(_a), uint256(_b), _c, _d, _e);
    }

    function arr(address _a, address _b, address _c) internal pure returns (uint256[] r) {
        return arr(uint256(_a), uint256(_b), uint256(_c));
    }

    function arr(address _a, address _b, uint256 _c) internal pure returns (uint256[] r) {
        return arr(uint256(_a), uint256(_b), uint256(_c));
    }

    function arr(uint256 _a) internal pure returns (uint256[] r) {
        r = new uint256[](1);
        r[0] = _a;
    }

    function arr(uint256 _a, uint256 _b) internal pure returns (uint256[] r) {
        r = new uint256[](2);
        r[0] = _a;
        r[1] = _b;
    }

    function arr(uint256 _a, uint256 _b, uint256 _c) internal pure returns (uint256[] r) {
        r = new uint256[](3);
        r[0] = _a;
        r[1] = _b;
        r[2] = _c;
    }

    function arr(uint256 _a, uint256 _b, uint256 _c, uint256 _d) internal pure returns (uint256[] r) {
        r = new uint256[](4);
        r[0] = _a;
        r[1] = _b;
        r[2] = _c;
        r[3] = _d;
    }

    function arr(uint256 _a, uint256 _b, uint256 _c, uint256 _d, uint256 _e) internal pure returns (uint256[] r) {
        r = new uint256[](5);
        r[0] = _a;
        r[1] = _b;
        r[2] = _c;
        r[3] = _d;
        r[4] = _e;
    }
}


contract ACLHelpers {
    function decodeParamOp(uint256 _x) internal pure returns (uint8 b) {
        return uint8(_x >> (8 * 30));
    }

    function decodeParamId(uint256 _x) internal pure returns (uint8 b) {
        return uint8(_x >> (8 * 31));
    }

    function decodeParamsList(uint256 _x) internal pure returns (uint32 a, uint32 b, uint32 c) {
        a = uint32(_x);
        b = uint32(_x >> (8 * 4));
        c = uint32(_x >> (8 * 8));
    }
}

// File: contracts/common/ConversionHelpers.sol

pragma solidity ^0.4.24;


library ConversionHelpers {
    string private constant ERROR_IMPROPER_LENGTH = "CONVERSION_IMPROPER_LENGTH";

    function dangerouslyCastUintArrayToBytes(uint256[] memory _input) internal pure returns (bytes memory output) {
        // Force cast the uint256[] into a bytes array, by overwriting its length
        // Note that the bytes array doesn't need to be initialized as we immediately overwrite it
        // with the input and a new length. The input becomes invalid from this point forward.
        uint256 byteLength = _input.length * 32;
        assembly {
            output := _input
            mstore(output, byteLength)
        }
    }

    function dangerouslyCastBytesToUintArray(bytes memory _input) internal pure returns (uint256[] memory output) {
        // Force cast the bytes array into a uint256[], by overwriting its length
        // Note that the uint256[] doesn't need to be initialized as we immediately overwrite it
        // with the input and a new length. The input becomes invalid from this point forward.
        uint256 intsLength = _input.length / 32;
        require(_input.length == intsLength * 32, ERROR_IMPROPER_LENGTH);

        assembly {
            output := _input
            mstore(output, intsLength)
        }
    }
}

// File: contracts/common/IsContract.sol

/*
 * SPDX-License-Identifier:    MIT
 */

pragma solidity ^0.4.24;


contract IsContract {
    /*
    * NOTE: this should NEVER be used for authentication
    * (see pitfalls: https://github.com/fergarrui/ethereum-security/tree/master/contracts/extcodesize).
    *
    * This is only intended to be used as a sanity check that an address is actually a contract,
    * RATHER THAN an address not being a contract.
    */
    function isContract(address _target) internal view returns (bool) {
        if (_target == address(0)) {
            return false;
        }

        uint256 size;
        assembly { size := extcodesize(_target) }
        return size > 0;
    }
}

// File: contracts/common/Uint256Helpers.sol

pragma solidity ^0.4.24;


library Uint256Helpers {
    uint256 private constant MAX_UINT64 = uint64(-1);

    string private constant ERROR_NUMBER_TOO_BIG = "UINT64_NUMBER_TOO_BIG";

    function toUint64(uint256 a) internal pure returns (uint64) {
        require(a <= MAX_UINT64, ERROR_NUMBER_TOO_BIG);
        return uint64(a);
    }
}

// File: contracts/common/TimeHelpers.sol

/*
 * SPDX-License-Identifier:    MIT
 */

pragma solidity ^0.4.24;



contract TimeHelpers {
    using Uint256Helpers for uint256;

    /**
    * @dev Returns the current block number.
    *      Using a function rather than `block.number` allows us to easily mock the block number in
    *      tests.
    */
    function getBlockNumber() internal view returns (uint256) {
        return block.number;
    }

    /**
    * @dev Returns the current block number, converted to uint64.
    *      Using a function rather than `block.number` allows us to easily mock the block number in
    *      tests.
    */
    function getBlockNumber64() internal view returns (uint64) {
        return getBlockNumber().toUint64();
    }

    /**
    * @dev Returns the current timestamp.
    *      Using a function rather than `block.timestamp` allows us to easily mock it in
    *      tests.
    */
    function getTimestamp() internal view returns (uint256) {
        return block.timestamp; // solium-disable-line security/no-block-members
    }

    /**
    * @dev Returns the current timestamp, converted to uint64.
    *      Using a function rather than `block.timestamp` allows us to easily mock it in
    *      tests.
    */
    function getTimestamp64() internal view returns (uint64) {
        return getTimestamp().toUint64();
    }
}

// File: contracts/common/UnstructuredStorage.sol

/*
 * SPDX-License-Identifier:    MIT
 */

pragma solidity ^0.4.24;


library UnstructuredStorage {
    function getStorageBool(bytes32 position) internal view returns (bool data) {
        assembly { data := sload(position) }
    }

    function getStorageAddress(bytes32 position) internal view returns (address data) {
        assembly { data := sload(position) }
    }

    function getStorageBytes32(bytes32 position) internal view returns (bytes32 data) {
        assembly { data := sload(position) }
    }

    function getStorageUint256(bytes32 position) internal view returns (uint256 data) {
        assembly { data := sload(position) }
    }

    function setStorageBool(bytes32 position, bool data) internal {
        assembly { sstore(position, data) }
    }

    function setStorageAddress(bytes32 position, address data) internal {
        assembly { sstore(position, data) }
    }

    function setStorageBytes32(bytes32 position, bytes32 data) internal {
        assembly { sstore(position, data) }
    }

    function setStorageUint256(bytes32 position, uint256 data) internal {
        assembly { sstore(position, data) }
    }
}

// File: contracts/common/Initializable.sol

/*
 * SPDX-License-Identifier:    MIT
 */

pragma solidity ^0.4.24;




contract Initializable is TimeHelpers {
    using UnstructuredStorage for bytes32;

    // keccak256("aragonOS.initializable.initializationBlock")
    bytes32 internal constant INITIALIZATION_BLOCK_POSITION = 0xebb05b386a8d34882b8711d156f463690983dc47815980fb82aeeff1aa43579e;

    string private constant ERROR_ALREADY_INITIALIZED = "INIT_ALREADY_INITIALIZED";
    string private constant ERROR_NOT_INITIALIZED = "INIT_NOT_INITIALIZED";

    modifier onlyInit {
        require(getInitializationBlock() == 0, ERROR_ALREADY_INITIALIZED);
        _;
    }

    modifier isInitialized {
        require(hasInitialized(), ERROR_NOT_INITIALIZED);
        _;
    }

    /**
    * @return Block number in which the contract was initialized
    */
    function getInitializationBlock() public view returns (uint256) {
        return INITIALIZATION_BLOCK_POSITION.getStorageUint256();
    }

    /**
    * @return Whether the contract has been initialized by the time of the current block
    */
    function hasInitialized() public view returns (bool) {
        uint256 initializationBlock = getInitializationBlock();
        return initializationBlock != 0 && getBlockNumber() >= initializationBlock;
    }

    /**
    * @dev Function to be called by top level contract after initialization has finished.
    */
    function initialized() internal onlyInit {
        INITIALIZATION_BLOCK_POSITION.setStorageUint256(getBlockNumber());
    }

    /**
    * @dev Function to be called by top level contract after initialization to enable the contract
    *      at a future block number rather than immediately.
    */
    function initializedAt(uint256 _blockNumber) internal onlyInit {
        INITIALIZATION_BLOCK_POSITION.setStorageUint256(_blockNumber);
    }
}

// File: contracts/common/Petrifiable.sol

/*
 * SPDX-License-Identifier:    MIT
 */

pragma solidity ^0.4.24;



contract Petrifiable is Initializable {
    // Use block UINT256_MAX (which should be never) as the initializable date
    uint256 internal constant PETRIFIED_BLOCK = uint256(-1);

    function isPetrified() public view returns (bool) {
        return getInitializationBlock() == PETRIFIED_BLOCK;
    }

    /**
    * @dev Function to be called by top level contract to prevent being initialized.
    *      Useful for freezing base contracts when they're used behind proxies.
    */
    function petrify() internal onlyInit {
        initializedAt(PETRIFIED_BLOCK);
    }
}

// File: contracts/lib/token/ERC20.sol

// See https://github.com/OpenZeppelin/openzeppelin-solidity/blob/a9f910d34f0ab33a1ae5e714f69f9596a02b4d91/contracts/token/ERC20/ERC20.sol

pragma solidity ^0.4.24;


/**
 * @title ERC20 interface
 * @dev see https://github.com/ethereum/EIPs/issues/20
 */
contract ERC20 {
    function totalSupply() public view returns (uint256);

    function balanceOf(address _who) public view returns (uint256);

    function allowance(address _owner, address _spender)
        public view returns (uint256);

    function transfer(address _to, uint256 _value) public returns (bool);

    function approve(address _spender, uint256 _value)
        public returns (bool);

    function transferFrom(address _from, address _to, uint256 _value)
        public returns (bool);

    event Transfer(
        address indexed from,
        address indexed to,
        uint256 value
    );

    event Approval(
        address indexed owner,
        address indexed spender,
        uint256 value
    );
}

// File: contracts/common/EtherTokenConstant.sol

/*
 * SPDX-License-Identifier:    MIT
 */

pragma solidity ^0.4.24;


// aragonOS and aragon-apps rely on address(0) to denote native ETH, in
// contracts where both tokens and ETH are accepted
contract EtherTokenConstant {
    address internal constant ETH = address(0);
}

// File: contracts/common/SafeERC20.sol

// Inspired by AdEx (https://github.com/AdExNetwork/adex-protocol-eth/blob/b9df617829661a7518ee10f4cb6c4108659dd6d5/contracts/libs/SafeERC20.sol)
// and 0x (https://github.com/0xProject/0x-monorepo/blob/737d1dc54d72872e24abce5a1dbe1b66d35fa21a/contracts/protocol/contracts/protocol/AssetProxy/ERC20Proxy.sol#L143)

pragma solidity ^0.4.24;



library SafeERC20 {
    // Before 0.5, solidity has a mismatch between `address.transfer()` and `token.transfer()`:
    // https://github.com/ethereum/solidity/issues/3544
    bytes4 private constant TRANSFER_SELECTOR = 0xa9059cbb;

    string private constant ERROR_TOKEN_BALANCE_REVERTED = "SAFE_ERC_20_BALANCE_REVERTED";
    string private constant ERROR_TOKEN_ALLOWANCE_REVERTED = "SAFE_ERC_20_ALLOWANCE_REVERTED";

    function invokeAndCheckSuccess(address _addr, bytes memory _calldata)
        private
        returns (bool)
    {
        bool ret;
        assembly {
            let ptr := mload(0x40)    // free memory pointer

            let success := call(
                gas,                  // forward all gas
                _addr,                // address
                0,                    // no value
                add(_calldata, 0x20), // calldata start
                mload(_calldata),     // calldata length
                ptr,                  // write output over free memory
                0x20                  // uint256 return
            )

            if gt(success, 0) {
                // Check number of bytes returned from last function call
                switch returndatasize

                // No bytes returned: assume success
                case 0 {
                    ret := 1
                }

                // 32 bytes returned: check if non-zero
                case 0x20 {
                    // Only return success if returned data was true
                    // Already have output in ptr
                    ret := eq(mload(ptr), 1)
                }

                // Not sure what was returned: don't mark as success
                default { }
            }
        }
        return ret;
    }

    function staticInvoke(address _addr, bytes memory _calldata)
        private
        view
        returns (bool, uint256)
    {
        bool success;
        uint256 ret;
        assembly {
            let ptr := mload(0x40)    // free memory pointer

            success := staticcall(
                gas,                  // forward all gas
                _addr,                // address
                add(_calldata, 0x20), // calldata start
                mload(_calldata),     // calldata length
                ptr,                  // write output over free memory
                0x20                  // uint256 return
            )

            if gt(success, 0) {
                ret := mload(ptr)
            }
        }
        return (success, ret);
    }

    /**
    * @dev Same as a standards-compliant ERC20.transfer() that never reverts (returns false).
    *      Note that this makes an external call to the token.
    */
    function safeTransfer(ERC20 _token, address _to, uint256 _amount) internal returns (bool) {
        bytes memory transferCallData = abi.encodeWithSelector(
            TRANSFER_SELECTOR,
            _to,
            _amount
        );
        return invokeAndCheckSuccess(_token, transferCallData);
    }

    /**
    * @dev Same as a standards-compliant ERC20.transferFrom() that never reverts (returns false).
    *      Note that this makes an external call to the token.
    */
    function safeTransferFrom(ERC20 _token, address _from, address _to, uint256 _amount) internal returns (bool) {
        bytes memory transferFromCallData = abi.encodeWithSelector(
            _token.transferFrom.selector,
            _from,
            _to,
            _amount
        );
        return invokeAndCheckSuccess(_token, transferFromCallData);
    }

    /**
    * @dev Same as a standards-compliant ERC20.approve() that never reverts (returns false).
    *      Note that this makes an external call to the token.
    */
    function safeApprove(ERC20 _token, address _spender, uint256 _amount) internal returns (bool) {
        bytes memory approveCallData = abi.encodeWithSelector(
            _token.approve.selector,
            _spender,
            _amount
        );
        return invokeAndCheckSuccess(_token, approveCallData);
    }

    /**
    * @dev Static call into ERC20.balanceOf().
    * Reverts if the call fails for some reason (should never fail).
    */
    function staticBalanceOf(ERC20 _token, address _owner) internal view returns (uint256) {
        bytes memory balanceOfCallData = abi.encodeWithSelector(
            _token.balanceOf.selector,
            _owner
        );

        (bool success, uint256 tokenBalance) = staticInvoke(_token, balanceOfCallData);
        require(success, ERROR_TOKEN_BALANCE_REVERTED);

        return tokenBalance;
    }

    /**
    * @dev Static call into ERC20.allowance().
    * Reverts if the call fails for some reason (should never fail).
    */
    function staticAllowance(ERC20 _token, address _owner, address _spender) internal view returns (uint256) {
        bytes memory allowanceCallData = abi.encodeWithSelector(
            _token.allowance.selector,
            _owner,
            _spender
        );

        (bool success, uint256 allowance) = staticInvoke(_token, allowanceCallData);
        require(success, ERROR_TOKEN_ALLOWANCE_REVERTED);

        return allowance;
    }

    /**
    * @dev Static call into ERC20.totalSupply().
    * Reverts if the call fails for some reason (should never fail).
    */
    function staticTotalSupply(ERC20 _token) internal view returns (uint256) {
        bytes memory totalSupplyCallData = abi.encodeWithSelector(_token.totalSupply.selector);

        (bool success, uint256 totalSupply) = staticInvoke(_token, totalSupplyCallData);
        require(success, ERROR_TOKEN_ALLOWANCE_REVERTED);

        return totalSupply;
    }
}

// File: contracts/common/VaultRecoverable.sol

/*
 * SPDX-License-Identifier:    MIT
 */

pragma solidity ^0.4.24;







contract VaultRecoverable is IVaultRecoverable, EtherTokenConstant, IsContract {
    using SafeERC20 for ERC20;

    string private constant ERROR_DISALLOWED = "RECOVER_DISALLOWED";
    string private constant ERROR_VAULT_NOT_CONTRACT = "RECOVER_VAULT_NOT_CONTRACT";
    string private constant ERROR_TOKEN_TRANSFER_FAILED = "RECOVER_TOKEN_TRANSFER_FAILED";

    /**
     * @notice Send funds to recovery Vault. This contract should never receive funds,
     *         but in case it does, this function allows one to recover them.
     * @param _token Token balance to be sent to recovery vault.
     */
    function transferToVault(address _token) external {
        require(allowRecoverability(_token), ERROR_DISALLOWED);
        address vault = getRecoveryVault();
        require(isContract(vault), ERROR_VAULT_NOT_CONTRACT);

        uint256 balance;
        if (_token == ETH) {
            balance = address(this).balance;
            vault.transfer(balance);
        } else {
            ERC20 token = ERC20(_token);
            balance = token.staticBalanceOf(this);
            require(token.safeTransfer(vault, balance), ERROR_TOKEN_TRANSFER_FAILED);
        }

        emit RecoverToVault(vault, _token, balance);
    }

    /**
    * @dev By default deriving from AragonApp makes it recoverable
    * @param token Token address that would be recovered
    * @return bool whether the app allows the recovery
    */
    function allowRecoverability(address token) public view returns (bool) {
        return true;
    }

    // Cast non-implemented interface to be public so we can use it internally
    function getRecoveryVault() public view returns (address);
}

// File: contracts/apps/AppStorage.sol

/*
 * SPDX-License-Identifier:    MIT
 */

pragma solidity ^0.4.24;




contract AppStorage {
    using UnstructuredStorage for bytes32;

    /* Hardcoded constants to save gas
    bytes32 internal constant KERNEL_POSITION = keccak256("aragonOS.appStorage.kernel");
    bytes32 internal constant APP_ID_POSITION = keccak256("aragonOS.appStorage.appId");
    */
    bytes32 internal constant KERNEL_POSITION = 0x4172f0f7d2289153072b0a6ca36959e0cbe2efc3afe50fc81636caa96338137b;
    bytes32 internal constant APP_ID_POSITION = 0xd625496217aa6a3453eecb9c3489dc5a53e6c67b444329ea2b2cbc9ff547639b;

    function kernel() public view returns (IKernel) {
        return IKernel(KERNEL_POSITION.getStorageAddress());
    }

    function appId() public view returns (bytes32) {
        return APP_ID_POSITION.getStorageBytes32();
    }

    function setKernel(IKernel _kernel) internal {
        KERNEL_POSITION.setStorageAddress(address(_kernel));
    }

    function setAppId(bytes32 _appId) internal {
        APP_ID_POSITION.setStorageBytes32(_appId);
    }
}

// File: contracts/lib/misc/ERCProxy.sol

/*
 * SPDX-License-Identifier:    MIT
 */

pragma solidity ^0.4.24;


contract ERCProxy {
    uint256 internal constant FORWARDING = 1;
    uint256 internal constant UPGRADEABLE = 2;

    function proxyType() public pure returns (uint256 proxyTypeId);
    function implementation() public view returns (address codeAddr);
}

// File: contracts/common/DelegateProxy.sol

pragma solidity 0.4.24;




contract DelegateProxy is ERCProxy, IsContract {
    uint256 internal constant FWD_GAS_LIMIT = 10000;

    /**
    * @dev Performs a delegatecall and returns whatever the delegatecall returned (entire context execution will return!)
    * @param _dst Destination address to perform the delegatecall
    * @param _calldata Calldata for the delegatecall
    */
    function delegatedFwd(address _dst, bytes _calldata) internal {
        require(isContract(_dst));
        uint256 fwdGasLimit = FWD_GAS_LIMIT;

        assembly {
            let result := delegatecall(sub(gas, fwdGasLimit), _dst, add(_calldata, 0x20), mload(_calldata), 0, 0)
            let size := returndatasize
            let ptr := mload(0x40)
            returndatacopy(ptr, 0, size)

            // revert instead of invalid() bc if the underlying call failed with invalid() it already wasted gas.
            // if the call returned error data, forward it
            switch result case 0 { revert(ptr, size) }
            default { return(ptr, size) }
        }
    }
}

// File: contracts/common/DepositableStorage.sol

pragma solidity 0.4.24;



contract DepositableStorage {
    using UnstructuredStorage for bytes32;

    // keccak256("aragonOS.depositableStorage.depositable")
    bytes32 internal constant DEPOSITABLE_POSITION = 0x665fd576fbbe6f247aff98f5c94a561e3f71ec2d3c988d56f12d342396c50cea;

    function isDepositable() public view returns (bool) {
        return DEPOSITABLE_POSITION.getStorageBool();
    }

    function setDepositable(bool _depositable) internal {
        DEPOSITABLE_POSITION.setStorageBool(_depositable);
    }
}

// File: contracts/common/DepositableDelegateProxy.sol

pragma solidity 0.4.24;




contract DepositableDelegateProxy is DepositableStorage, DelegateProxy {
    event ProxyDeposit(address sender, uint256 value);

    function () external payable {
        uint256 forwardGasThreshold = FWD_GAS_LIMIT;
        bytes32 isDepositablePosition = DEPOSITABLE_POSITION;

        // Optimized assembly implementation to prevent EIP-1884 from breaking deposits, reference code in Solidity:
        // https://github.com/aragon/aragonOS/blob/v4.2.1/contracts/common/DepositableDelegateProxy.sol#L10-L20
        assembly {
            // Continue only if the gas left is lower than the threshold for forwarding to the implementation code,
            // otherwise continue outside of the assembly block.
            if lt(gas, forwardGasThreshold) {
                // Only accept the deposit and emit an event if all of the following are true:
                // the proxy accepts deposits (isDepositable), msg.data.length == 0, and msg.value > 0
                if and(and(sload(isDepositablePosition), iszero(calldatasize)), gt(callvalue, 0)) {
                    // Equivalent Solidity code for emitting the event:
                    // emit ProxyDeposit(msg.sender, msg.value);

                    let logData := mload(0x40) // free memory pointer
                    mstore(logData, caller) // add 'msg.sender' to the log data (first event param)
                    mstore(add(logData, 0x20), callvalue) // add 'msg.value' to the log data (second event param)

                    // Emit an event with one topic to identify the event: keccak256('ProxyDeposit(address,uint256)') = 0x15ee...dee1
                    log1(logData, 0x40, 0x15eeaa57c7bd188c1388020bcadc2c436ec60d647d36ef5b9eb3c742217ddee1)

                    stop() // Stop. Exits execution context
                }

                // If any of above checks failed, revert the execution (if ETH was sent, it is returned to the sender)
                revert(0, 0)
            }
        }

        address target = implementation();
        delegatedFwd(target, msg.data);
    }
}

// File: contracts/apps/AppProxyBase.sol

pragma solidity 0.4.24;






contract AppProxyBase is AppStorage, DepositableDelegateProxy, KernelNamespaceConstants {
    /**
    * @dev Initialize AppProxy
    * @param _kernel Reference to organization kernel for the app
    * @param _appId Identifier for app
    * @param _initializePayload Payload for call to be made after setup to initialize
    */
    constructor(IKernel _kernel, bytes32 _appId, bytes _initializePayload) public {
        setKernel(_kernel);
        setAppId(_appId);

        // Implicit check that kernel is actually a Kernel
        // The EVM doesn't actually provide a way for us to make sure, but we can force a revert to
        // occur if the kernel is set to 0x0 or a non-code address when we try to call a method on
        // it.
        address appCode = getAppBase(_appId);

        // If initialize payload is provided, it will be executed
        if (_initializePayload.length > 0) {
            require(isContract(appCode));
            // Cannot make delegatecall as a delegateproxy.delegatedFwd as it
            // returns ending execution context and halts contract deployment
            require(appCode.delegatecall(_initializePayload));
        }
    }

    function getAppBase(bytes32 _appId) internal view returns (address) {
        return kernel().getApp(KERNEL_APP_BASES_NAMESPACE, _appId);
    }
}

// File: contracts/apps/AppProxyUpgradeable.sol

pragma solidity 0.4.24;



contract AppProxyUpgradeable is AppProxyBase {
    /**
    * @dev Initialize AppProxyUpgradeable (makes it an upgradeable Aragon app)
    * @param _kernel Reference to organization kernel for the app
    * @param _appId Identifier for app
    * @param _initializePayload Payload for call to be made after setup to initialize
    */
    constructor(IKernel _kernel, bytes32 _appId, bytes _initializePayload)
        AppProxyBase(_kernel, _appId, _initializePayload)
        public // solium-disable-line visibility-first
    {
        // solium-disable-previous-line no-empty-blocks
    }

    /**
     * @dev ERC897, the address the proxy would delegate calls to
     */
    function implementation() public view returns (address) {
        return getAppBase(appId());
    }

    /**
     * @dev ERC897, whether it is a forwarding (1) or an upgradeable (2) proxy
     */
    function proxyType() public pure returns (uint256 proxyTypeId) {
        return UPGRADEABLE;
    }
}

// File: contracts/apps/AppProxyPinned.sol

pragma solidity 0.4.24;





contract AppProxyPinned is IsContract, AppProxyBase {
    using UnstructuredStorage for bytes32;

    // keccak256("aragonOS.appStorage.pinnedCode")
    bytes32 internal constant PINNED_CODE_POSITION = 0xdee64df20d65e53d7f51cb6ab6d921a0a6a638a91e942e1d8d02df28e31c038e;

    /**
    * @dev Initialize AppProxyPinned (makes it an un-upgradeable Aragon app)
    * @param _kernel Reference to organization kernel for the app
    * @param _appId Identifier for app
    * @param _initializePayload Payload for call to be made after setup to initialize
    */
    constructor(IKernel _kernel, bytes32 _appId, bytes _initializePayload)
        AppProxyBase(_kernel, _appId, _initializePayload)
        public // solium-disable-line visibility-first
    {
        setPinnedCode(getAppBase(_appId));
        require(isContract(pinnedCode()));
    }

    /**
     * @dev ERC897, the address the proxy would delegate calls to
     */
    function implementation() public view returns (address) {
        return pinnedCode();
    }

    /**
     * @dev ERC897, whether it is a forwarding (1) or an upgradeable (2) proxy
     */
    function proxyType() public pure returns (uint256 proxyTypeId) {
        return FORWARDING;
    }

    function setPinnedCode(address _pinnedCode) internal {
        PINNED_CODE_POSITION.setStorageAddress(_pinnedCode);
    }

    function pinnedCode() internal view returns (address) {
        return PINNED_CODE_POSITION.getStorageAddress();
    }
}

// File: contracts/factory/AppProxyFactory.sol

pragma solidity 0.4.24;




contract AppProxyFactory {
    event NewAppProxy(address proxy, bool isUpgradeable, bytes32 appId);

    /**
    * @notice Create a new upgradeable app instance on `_kernel` with identifier `_appId`
    * @param _kernel App's Kernel reference
    * @param _appId Identifier for app
    * @return AppProxyUpgradeable
    */
    function newAppProxy(IKernel _kernel, bytes32 _appId) public returns (AppProxyUpgradeable) {
        return newAppProxy(_kernel, _appId, new bytes(0));
    }

    /**
    * @notice Create a new upgradeable app instance on `_kernel` with identifier `_appId` and initialization payload `_initializePayload`
    * @param _kernel App's Kernel reference
    * @param _appId Identifier for app
    * @return AppProxyUpgradeable
    */
    function newAppProxy(IKernel _kernel, bytes32 _appId, bytes _initializePayload) public returns (AppProxyUpgradeable) {
        AppProxyUpgradeable proxy = new AppProxyUpgradeable(_kernel, _appId, _initializePayload);
        emit NewAppProxy(address(proxy), true, _appId);
        return proxy;
    }

    /**
    * @notice Create a new pinned app instance on `_kernel` with identifier `_appId`
    * @param _kernel App's Kernel reference
    * @param _appId Identifier for app
    * @return AppProxyPinned
    */
    function newAppProxyPinned(IKernel _kernel, bytes32 _appId) public returns (AppProxyPinned) {
        return newAppProxyPinned(_kernel, _appId, new bytes(0));
    }

    /**
    * @notice Create a new pinned app instance on `_kernel` with identifier `_appId` and initialization payload `_initializePayload`
    * @param _kernel App's Kernel reference
    * @param _appId Identifier for app
    * @param _initializePayload Proxy initialization payload
    * @return AppProxyPinned
    */
    function newAppProxyPinned(IKernel _kernel, bytes32 _appId, bytes _initializePayload) public returns (AppProxyPinned) {
        AppProxyPinned proxy = new AppProxyPinned(_kernel, _appId, _initializePayload);
        emit NewAppProxy(address(proxy), false, _appId);
        return proxy;
    }
}

// File: contracts/kernel/Kernel.sol

pragma solidity 0.4.24;













// solium-disable-next-line max-len
contract Kernel is IKernel, KernelStorage, KernelAppIds, KernelNamespaceConstants, Petrifiable, IsContract, VaultRecoverable, AppProxyFactory, ACLSyntaxSugar {
    /* Hardcoded constants to save gas
    bytes32 public constant APP_MANAGER_ROLE = keccak256("APP_MANAGER_ROLE");
    */
    bytes32 public constant APP_MANAGER_ROLE = 0xb6d92708f3d4817afc106147d969e229ced5c46e65e0a5002a0d391287762bd0;

    string private constant ERROR_APP_NOT_CONTRACT = "KERNEL_APP_NOT_CONTRACT";
    string private constant ERROR_INVALID_APP_CHANGE = "KERNEL_INVALID_APP_CHANGE";
    string private constant ERROR_AUTH_FAILED = "KERNEL_AUTH_FAILED";

    /**
    * @dev Constructor that allows the deployer to choose if the base instance should be petrified immediately.
    * @param _shouldPetrify Immediately petrify this instance so that it can never be initialized
    */
    constructor(bool _shouldPetrify) public {
        if (_shouldPetrify) {
            petrify();
        }
    }

    /**
    * @dev Initialize can only be called once. It saves the block number in which it was initialized.
    * @notice Initialize this kernel instance along with its ACL and set `_permissionsCreator` as the entity that can create other permissions
    * @param _baseAcl Address of base ACL app
    * @param _permissionsCreator Entity that will be given permission over createPermission
    */
    function initialize(IACL _baseAcl, address _permissionsCreator) public onlyInit {
        initialized();

        // Set ACL base
        _setApp(KERNEL_APP_BASES_NAMESPACE, KERNEL_DEFAULT_ACL_APP_ID, _baseAcl);

        // Create ACL instance and attach it as the default ACL app
        IACL acl = IACL(newAppProxy(this, KERNEL_DEFAULT_ACL_APP_ID));
        acl.initialize(_permissionsCreator);
        _setApp(KERNEL_APP_ADDR_NAMESPACE, KERNEL_DEFAULT_ACL_APP_ID, acl);

        recoveryVaultAppId = KERNEL_DEFAULT_VAULT_APP_ID;
    }

    /**
    * @dev Create a new instance of an app linked to this kernel
    * @notice Create a new upgradeable instance of `_appId` app linked to the Kernel, setting its code to `_appBase`
    * @param _appId Identifier for app
    * @param _appBase Address of the app's base implementation
    * @return AppProxy instance
    */
    function newAppInstance(bytes32 _appId, address _appBase)
        public
        auth(APP_MANAGER_ROLE, arr(KERNEL_APP_BASES_NAMESPACE, _appId))
        returns (ERCProxy appProxy)
    {
        return newAppInstance(_appId, _appBase, new bytes(0), false);
    }

    /**
    * @dev Create a new instance of an app linked to this kernel and set its base
    *      implementation if it was not already set
    * @notice Create a new upgradeable instance of `_appId` app linked to the Kernel, setting its code to `_appBase`. `_setDefault ? 'Also sets it as the default app instance.':''`
    * @param _appId Identifier for app
    * @param _appBase Address of the app's base implementation
    * @param _initializePayload Payload for call made by the proxy during its construction to initialize
    * @param _setDefault Whether the app proxy app is the default one.
    *        Useful when the Kernel needs to know of an instance of a particular app,
    *        like Vault for escape hatch mechanism.
    * @return AppProxy instance
    */
    function newAppInstance(bytes32 _appId, address _appBase, bytes _initializePayload, bool _setDefault)
        public
        auth(APP_MANAGER_ROLE, arr(KERNEL_APP_BASES_NAMESPACE, _appId))
        returns (ERCProxy appProxy)
    {
        _setAppIfNew(KERNEL_APP_BASES_NAMESPACE, _appId, _appBase);
        appProxy = newAppProxy(this, _appId, _initializePayload);
        // By calling setApp directly and not the internal functions, we make sure the params are checked
        // and it will only succeed if sender has permissions to set something to the namespace.
        if (_setDefault) {
            setApp(KERNEL_APP_ADDR_NAMESPACE, _appId, appProxy);
        }
    }

    /**
    * @dev Create a new pinned instance of an app linked to this kernel
    * @notice Create a new non-upgradeable instance of `_appId` app linked to the Kernel, setting its code to `_appBase`.
    * @param _appId Identifier for app
    * @param _appBase Address of the app's base implementation
    * @return AppProxy instance
    */
    function newPinnedAppInstance(bytes32 _appId, address _appBase)
        public
        auth(APP_MANAGER_ROLE, arr(KERNEL_APP_BASES_NAMESPACE, _appId))
        returns (ERCProxy appProxy)
    {
        return newPinnedAppInstance(_appId, _appBase, new bytes(0), false);
    }

    /**
    * @dev Create a new pinned instance of an app linked to this kernel and set
    *      its base implementation if it was not already set
    * @notice Create a new non-upgradeable instance of `_appId` app linked to the Kernel, setting its code to `_appBase`. `_setDefault ? 'Also sets it as the default app instance.':''`
    * @param _appId Identifier for app
    * @param _appBase Address of the app's base implementation
    * @param _initializePayload Payload for call made by the proxy during its construction to initialize
    * @param _setDefault Whether the app proxy app is the default one.
    *        Useful when the Kernel needs to know of an instance of a particular app,
    *        like Vault for escape hatch mechanism.
    * @return AppProxy instance
    */
    function newPinnedAppInstance(bytes32 _appId, address _appBase, bytes _initializePayload, bool _setDefault)
        public
        auth(APP_MANAGER_ROLE, arr(KERNEL_APP_BASES_NAMESPACE, _appId))
        returns (ERCProxy appProxy)
    {
        _setAppIfNew(KERNEL_APP_BASES_NAMESPACE, _appId, _appBase);
        appProxy = newAppProxyPinned(this, _appId, _initializePayload);
        // By calling setApp directly and not the internal functions, we make sure the params are checked
        // and it will only succeed if sender has permissions to set something to the namespace.
        if (_setDefault) {
            setApp(KERNEL_APP_ADDR_NAMESPACE, _appId, appProxy);
        }
    }

    /**
    * @dev Set the resolving address of an app instance or base implementation
    * @notice Set the resolving address of `_appId` in namespace `_namespace` to `_app`
    * @param _namespace App namespace to use
    * @param _appId Identifier for app
    * @param _app Address of the app instance or base implementation
    * @return ID of app
    */
    function setApp(bytes32 _namespace, bytes32 _appId, address _app)
        public
        auth(APP_MANAGER_ROLE, arr(_namespace, _appId))
    {
        _setApp(_namespace, _appId, _app);
    }

    /**
    * @dev Set the default vault id for the escape hatch mechanism
    * @param _recoveryVaultAppId Identifier of the recovery vault app
    */
    function setRecoveryVaultAppId(bytes32 _recoveryVaultAppId)
        public
        auth(APP_MANAGER_ROLE, arr(KERNEL_APP_ADDR_NAMESPACE, _recoveryVaultAppId))
    {
        recoveryVaultAppId = _recoveryVaultAppId;
    }

    // External access to default app id and namespace constants to mimic default getters for constants
    /* solium-disable function-order, mixedcase */
    function CORE_NAMESPACE() external pure returns (bytes32) { return KERNEL_CORE_NAMESPACE; }
    function APP_BASES_NAMESPACE() external pure returns (bytes32) { return KERNEL_APP_BASES_NAMESPACE; }
    function APP_ADDR_NAMESPACE() external pure returns (bytes32) { return KERNEL_APP_ADDR_NAMESPACE; }
    function KERNEL_APP_ID() external pure returns (bytes32) { return KERNEL_CORE_APP_ID; }
    function DEFAULT_ACL_APP_ID() external pure returns (bytes32) { return KERNEL_DEFAULT_ACL_APP_ID; }
    /* solium-enable function-order, mixedcase */

    /**
    * @dev Get the address of an app instance or base implementation
    * @param _namespace App namespace to use
    * @param _appId Identifier for app
    * @return Address of the app
    */
    function getApp(bytes32 _namespace, bytes32 _appId) public view returns (address) {
        return apps[_namespace][_appId];
    }

    /**
    * @dev Get the address of the recovery Vault instance (to recover funds)
    * @return Address of the Vault
    */
    function getRecoveryVault() public view returns (address) {
        return apps[KERNEL_APP_ADDR_NAMESPACE][recoveryVaultAppId];
    }

    /**
    * @dev Get the installed ACL app
    * @return ACL app
    */
    function acl() public view returns (IACL) {
        return IACL(getApp(KERNEL_APP_ADDR_NAMESPACE, KERNEL_DEFAULT_ACL_APP_ID));
    }

    /**
    * @dev Function called by apps to check ACL on kernel or to check permission status
    * @param _who Sender of the original call
    * @param _where Address of the app
    * @param _what Identifier for a group of actions in app
    * @param _how Extra data for ACL auth
    * @return Boolean indicating whether the ACL allows the role or not.
    *         Always returns false if the kernel hasn't been initialized yet.
    */
    function hasPermission(address _who, address _where, bytes32 _what, bytes _how) public view returns (bool) {
        IACL defaultAcl = acl();
        return address(defaultAcl) != address(0) && // Poor man's initialization check (saves gas)
            defaultAcl.hasPermission(_who, _where, _what, _how);
    }

    function _setApp(bytes32 _namespace, bytes32 _appId, address _app) internal {
        require(isContract(_app), ERROR_APP_NOT_CONTRACT);
        apps[_namespace][_appId] = _app;
        emit SetApp(_namespace, _appId, _app);
    }

    function _setAppIfNew(bytes32 _namespace, bytes32 _appId, address _app) internal {
        address app = getApp(_namespace, _appId);
        if (app != address(0)) {
            // The only way to set an app is if it passes the isContract check, so no need to check it again
            require(app == _app, ERROR_INVALID_APP_CHANGE);
        } else {
            _setApp(_namespace, _appId, _app);
        }
    }

    modifier auth(bytes32 _role, uint256[] memory _params) {
        require(
            hasPermission(msg.sender, address(this), _role, ConversionHelpers.dangerouslyCastUintArrayToBytes(_params)),
            ERROR_AUTH_FAILED
        );
        _;
    }
}

// File: contracts/kernel/KernelProxy.sol

pragma solidity 0.4.24;







contract KernelProxy is IKernelEvents, KernelStorage, KernelAppIds, KernelNamespaceConstants, IsContract, DepositableDelegateProxy {
    /**
    * @dev KernelProxy is a proxy contract to a kernel implementation. The implementation
    *      can update the reference, which effectively upgrades the contract
    * @param _kernelImpl Address of the contract used as implementation for kernel
    */
    constructor(IKernel _kernelImpl) public {
        require(isContract(address(_kernelImpl)));
        apps[KERNEL_CORE_NAMESPACE][KERNEL_CORE_APP_ID] = _kernelImpl;

        // Note that emitting this event is important for verifying that a KernelProxy instance
        // was never upgraded to a malicious Kernel logic contract over its lifespan.
        // This starts the "chain of trust", that can be followed through later SetApp() events
        // emitted during kernel upgrades.
        emit SetApp(KERNEL_CORE_NAMESPACE, KERNEL_CORE_APP_ID, _kernelImpl);
    }

    /**
     * @dev ERC897, whether it is a forwarding (1) or an upgradeable (2) proxy
     */
    function proxyType() public pure returns (uint256 proxyTypeId) {
        return UPGRADEABLE;
    }

    /**
    * @dev ERC897, the address the proxy would delegate calls to
    */
    function implementation() public view returns (address) {
        return apps[KERNEL_CORE_NAMESPACE][KERNEL_CORE_APP_ID];
    }
}

// File: contracts/common/Autopetrified.sol

/*
 * SPDX-License-Identifier:    MIT
 */

pragma solidity ^0.4.24;



contract Autopetrified is Petrifiable {
    constructor() public {
        // Immediately petrify base (non-proxy) instances of inherited contracts on deploy.
        // This renders them uninitializable (and unusable without a proxy).
        petrify();
    }
}

// File: contracts/common/ReentrancyGuard.sol

/*
 * SPDX-License-Identifier:    MIT
 */

pragma solidity ^0.4.24;



contract ReentrancyGuard {
    using UnstructuredStorage for bytes32;

    /* Hardcoded constants to save gas
    bytes32 internal constant REENTRANCY_MUTEX_POSITION = keccak256("aragonOS.reentrancyGuard.mutex");
    */
    bytes32 private constant REENTRANCY_MUTEX_POSITION = 0xe855346402235fdd185c890e68d2c4ecad599b88587635ee285bce2fda58dacb;

    string private constant ERROR_REENTRANT = "REENTRANCY_REENTRANT_CALL";

    modifier nonReentrant() {
        // Ensure mutex is unlocked
        require(!REENTRANCY_MUTEX_POSITION.getStorageBool(), ERROR_REENTRANT);

        // Lock mutex before function call
        REENTRANCY_MUTEX_POSITION.setStorageBool(true);

        // Perform function call
        _;

        // Unlock mutex after function call
        REENTRANCY_MUTEX_POSITION.setStorageBool(false);
    }
}

// File: contracts/evmscript/IEVMScriptExecutor.sol

/*
 * SPDX-License-Identifier:    MIT
 */

pragma solidity ^0.4.24;


interface IEVMScriptExecutor {
    function execScript(bytes script, bytes input, address[] blacklist) external returns (bytes);
    function executorType() external pure returns (bytes32);
}

// File: contracts/evmscript/IEVMScriptRegistry.sol

/*
 * SPDX-License-Identifier:    MIT
 */

pragma solidity ^0.4.24;



contract EVMScriptRegistryConstants {
    /* Hardcoded constants to save gas
    bytes32 internal constant EVMSCRIPT_REGISTRY_APP_ID = apmNamehash("evmreg");
    */
    bytes32 internal constant EVMSCRIPT_REGISTRY_APP_ID = 0xddbcfd564f642ab5627cf68b9b7d374fb4f8a36e941a75d89c87998cef03bd61;
}


interface IEVMScriptRegistry {
    function addScriptExecutor(IEVMScriptExecutor executor) external returns (uint id);
    function disableScriptExecutor(uint256 executorId) external;

    // TODO: this should be external
    // See https://github.com/ethereum/solidity/issues/4832
    function getScriptExecutor(bytes script) public view returns (IEVMScriptExecutor);
}

// File: contracts/evmscript/EVMScriptRunner.sol

/*
 * SPDX-License-Identifier:    MIT
 */

pragma solidity ^0.4.24;







contract EVMScriptRunner is AppStorage, Initializable, EVMScriptRegistryConstants, KernelNamespaceConstants {
    string private constant ERROR_EXECUTOR_UNAVAILABLE = "EVMRUN_EXECUTOR_UNAVAILABLE";
    string private constant ERROR_PROTECTED_STATE_MODIFIED = "EVMRUN_PROTECTED_STATE_MODIFIED";

    /* This is manually crafted in assembly
    string private constant ERROR_EXECUTOR_INVALID_RETURN = "EVMRUN_EXECUTOR_INVALID_RETURN";
    */

    event ScriptResult(address indexed executor, bytes script, bytes input, bytes returnData);

    function getEVMScriptExecutor(bytes _script) public view returns (IEVMScriptExecutor) {
        return IEVMScriptExecutor(getEVMScriptRegistry().getScriptExecutor(_script));
    }

    function getEVMScriptRegistry() public view returns (IEVMScriptRegistry) {
        address registryAddr = kernel().getApp(KERNEL_APP_ADDR_NAMESPACE, EVMSCRIPT_REGISTRY_APP_ID);
        return IEVMScriptRegistry(registryAddr);
    }

    function runScript(bytes _script, bytes _input, address[] _blacklist)
        internal
        isInitialized
        protectState
        returns (bytes)
    {
        IEVMScriptExecutor executor = getEVMScriptExecutor(_script);
        require(address(executor) != address(0), ERROR_EXECUTOR_UNAVAILABLE);

        bytes4 sig = executor.execScript.selector;
        bytes memory data = abi.encodeWithSelector(sig, _script, _input, _blacklist);

        bytes memory output;
        assembly {
            let success := delegatecall(
                gas,                // forward all gas
                executor,           // address
                add(data, 0x20),    // calldata start
                mload(data),        // calldata length
                0,                  // don't write output (we'll handle this ourselves)
                0                   // don't write output
            )

            output := mload(0x40) // free mem ptr get

            switch success
            case 0 {
                // If the call errored, forward its full error data
                returndatacopy(output, 0, returndatasize)
                revert(output, returndatasize)
            }
            default {
                switch gt(returndatasize, 0x3f)
                case 0 {
                    // Need at least 0x40 bytes returned for properly ABI-encoded bytes values,
                    // revert with "EVMRUN_EXECUTOR_INVALID_RETURN"
                    // See remix: doing a `revert("EVMRUN_EXECUTOR_INVALID_RETURN")` always results in
                    // this memory layout
                    mstore(output, 0x08c379a000000000000000000000000000000000000000000000000000000000)         // error identifier
                    mstore(add(output, 0x04), 0x0000000000000000000000000000000000000000000000000000000000000020) // starting offset
                    mstore(add(output, 0x24), 0x000000000000000000000000000000000000000000000000000000000000001e) // reason length
                    mstore(add(output, 0x44), 0x45564d52554e5f4558454355544f525f494e56414c49445f52455455524e0000) // reason

                    revert(output, 100) // 100 = 4 + 3 * 32 (error identifier + 3 words for the ABI encoded error)
                }
                default {
                    // Copy result
                    //
                    // Needs to perform an ABI decode for the expected `bytes` return type of
                    // `executor.execScript()` as solidity will automatically ABI encode the returned bytes as:
                    //    [ position of the first dynamic length return value = 0x20 (32 bytes) ]
                    //    [ output length (32 bytes) ]
                    //    [ output content (N bytes) ]
                    //
                    // Perform the ABI decode by ignoring the first 32 bytes of the return data
                    let copysize := sub(returndatasize, 0x20)
                    returndatacopy(output, 0x20, copysize)

                    mstore(0x40, add(output, copysize)) // free mem ptr set
                }
            }
        }

        emit ScriptResult(address(executor), _script, _input, output);

        return output;
    }

    modifier protectState {
        address preKernel = address(kernel());
        bytes32 preAppId = appId();
        _; // exec
        require(address(kernel()) == preKernel, ERROR_PROTECTED_STATE_MODIFIED);
        require(appId() == preAppId, ERROR_PROTECTED_STATE_MODIFIED);
    }
}

// File: contracts/apps/AragonApp.sol

/*
 * SPDX-License-Identifier:    MIT
 */

pragma solidity ^0.4.24;









// Contracts inheriting from AragonApp are, by default, immediately petrified upon deployment so
// that they can never be initialized.
// Unless overriden, this behaviour enforces those contracts to be usable only behind an AppProxy.
// ReentrancyGuard, EVMScriptRunner, and ACLSyntaxSugar are not directly used by this contract, but
// are included so that they are automatically usable by subclassing contracts
contract AragonApp is AppStorage, Autopetrified, VaultRecoverable, ReentrancyGuard, EVMScriptRunner, ACLSyntaxSugar {
    string private constant ERROR_AUTH_FAILED = "APP_AUTH_FAILED";

    modifier auth(bytes32 _role) {
        require(canPerform(msg.sender, _role, new uint256[](0)), ERROR_AUTH_FAILED);
        _;
    }

    modifier authP(bytes32 _role, uint256[] _params) {
        require(canPerform(msg.sender, _role, _params), ERROR_AUTH_FAILED);
        _;
    }

    /**
    * @dev Check whether an action can be performed by a sender for a particular role on this app
    * @param _sender Sender of the call
    * @param _role Role on this app
    * @param _params Permission params for the role
    * @return Boolean indicating whether the sender has the permissions to perform the action.
    *         Always returns false if the app hasn't been initialized yet.
    */
    function canPerform(address _sender, bytes32 _role, uint256[] _params) public view returns (bool) {
        if (!hasInitialized()) {
            return false;
        }

        IKernel linkedKernel = kernel();
        if (address(linkedKernel) == address(0)) {
            return false;
        }

        return linkedKernel.hasPermission(
            _sender,
            address(this),
            _role,
            ConversionHelpers.dangerouslyCastUintArrayToBytes(_params)
        );
    }

    /**
    * @dev Get the recovery vault for the app
    * @return Recovery vault address for the app
    */
    function getRecoveryVault() public view returns (address) {
        // Funds recovery via a vault is only available when used with a kernel
        return kernel().getRecoveryVault(); // if kernel is not set, it will revert
    }
}

// File: contracts/acl/IACLOracle.sol

/*
 * SPDX-License-Identifier:    MIT
 */

pragma solidity ^0.4.24;


interface IACLOracle {
    function canPerform(address who, address where, bytes32 what, uint256[] how) external view returns (bool);
}

// File: contracts/acl/ACL.sol

pragma solidity 0.4.24;








/* solium-disable function-order */
// Allow public initialize() to be first
contract ACL is IACL, TimeHelpers, AragonApp, ACLHelpers {
    /* Hardcoded constants to save gas
    bytes32 public constant CREATE_PERMISSIONS_ROLE = keccak256("CREATE_PERMISSIONS_ROLE");
    */
    bytes32 public constant CREATE_PERMISSIONS_ROLE = 0x0b719b33c83b8e5d300c521cb8b54ae9bd933996a14bef8c2f4e0285d2d2400a;

    enum Op { NONE, EQ, NEQ, GT, LT, GTE, LTE, RET, NOT, AND, OR, XOR, IF_ELSE } // op types

    struct Param {
        uint8 id;
        uint8 op;
        uint240 value; // even though value is an uint240 it can store addresses
        // in the case of 32 byte hashes losing 2 bytes precision isn't a huge deal
        // op and id take less than 1 byte each so it can be kept in 1 sstore
    }

    uint8 internal constant BLOCK_NUMBER_PARAM_ID = 200;
    uint8 internal constant TIMESTAMP_PARAM_ID    = 201;
    // 202 is unused
    uint8 internal constant ORACLE_PARAM_ID       = 203;
    uint8 internal constant LOGIC_OP_PARAM_ID     = 204;
    uint8 internal constant PARAM_VALUE_PARAM_ID  = 205;
    // TODO: Add execution times param type?

    /* Hardcoded constant to save gas
    bytes32 public constant EMPTY_PARAM_HASH = keccak256(uint256(0));
    */
    bytes32 public constant EMPTY_PARAM_HASH = 0x290decd9548b62a8d60345a988386fc84ba6bc95484008f6362f93160ef3e563;
    bytes32 public constant NO_PERMISSION = bytes32(0);
    address public constant ANY_ENTITY = address(-1);
    address public constant BURN_ENTITY = address(1); // address(0) is already used as "no permission manager"

    string private constant ERROR_AUTH_INIT_KERNEL = "ACL_AUTH_INIT_KERNEL";
    string private constant ERROR_AUTH_NO_MANAGER = "ACL_AUTH_NO_MANAGER";
    string private constant ERROR_EXISTENT_MANAGER = "ACL_EXISTENT_MANAGER";

    // Whether someone has a permission
    mapping (bytes32 => bytes32) internal permissions; // permissions hash => params hash
    mapping (bytes32 => Param[]) internal permissionParams; // params hash => params

    // Who is the manager of a permission
    mapping (bytes32 => address) internal permissionManager;

    event SetPermission(address indexed entity, address indexed app, bytes32 indexed role, bool allowed);
    event SetPermissionParams(address indexed entity, address indexed app, bytes32 indexed role, bytes32 paramsHash);
    event ChangePermissionManager(address indexed app, bytes32 indexed role, address indexed manager);

    modifier onlyPermissionManager(address _app, bytes32 _role) {
        require(msg.sender == getPermissionManager(_app, _role), ERROR_AUTH_NO_MANAGER);
        _;
    }

    modifier noPermissionManager(address _app, bytes32 _role) {
        // only allow permission creation (or re-creation) when there is no manager
        require(getPermissionManager(_app, _role) == address(0), ERROR_EXISTENT_MANAGER);
        _;
    }

    /**
    * @dev Initialize can only be called once. It saves the block number in which it was initialized.
    * @notice Initialize an ACL instance and set `_permissionsCreator` as the entity that can create other permissions
    * @param _permissionsCreator Entity that will be given permission over createPermission
    */
    function initialize(address _permissionsCreator) public onlyInit {
        initialized();
        require(msg.sender == address(kernel()), ERROR_AUTH_INIT_KERNEL);

        _createPermission(_permissionsCreator, this, CREATE_PERMISSIONS_ROLE, _permissionsCreator);
    }

    /**
    * @dev Creates a permission that wasn't previously set and managed.
    *      If a created permission is removed it is possible to reset it with createPermission.
    *      This is the **ONLY** way to create permissions and set managers to permissions that don't
    *      have a manager.
    *      In terms of the ACL being initialized, this function implicitly protects all the other
    *      state-changing external functions, as they all require the sender to be a manager.
    * @notice Create a new permission granting `_entity` the ability to perform actions requiring `_role` on `_app`, setting `_manager` as the permission's manager
    * @param _entity Address of the whitelisted entity that will be able to perform the role
    * @param _app Address of the app in which the role will be allowed (requires app to depend on kernel for ACL)
    * @param _role Identifier for the group of actions in app given access to perform
    * @param _manager Address of the entity that will be able to grant and revoke the permission further.
    */
    function createPermission(address _entity, address _app, bytes32 _role, address _manager)
        external
        auth(CREATE_PERMISSIONS_ROLE)
        noPermissionManager(_app, _role)
    {
        _createPermission(_entity, _app, _role, _manager);
    }

    /**
    * @dev Grants permission if allowed. This requires `msg.sender` to be the permission manager
    * @notice Grant `_entity` the ability to perform actions requiring `_role` on `_app`
    * @param _entity Address of the whitelisted entity that will be able to perform the role
    * @param _app Address of the app in which the role will be allowed (requires app to depend on kernel for ACL)
    * @param _role Identifier for the group of actions in app given access to perform
    */
    function grantPermission(address _entity, address _app, bytes32 _role)
        external
    {
        grantPermissionP(_entity, _app, _role, new uint256[](0));
    }

    /**
    * @dev Grants a permission with parameters if allowed. This requires `msg.sender` to be the permission manager
    * @notice Grant `_entity` the ability to perform actions requiring `_role` on `_app`
    * @param _entity Address of the whitelisted entity that will be able to perform the role
    * @param _app Address of the app in which the role will be allowed (requires app to depend on kernel for ACL)
    * @param _role Identifier for the group of actions in app given access to perform
    * @param _params Permission parameters
    */
    function grantPermissionP(address _entity, address _app, bytes32 _role, uint256[] _params)
        public
        onlyPermissionManager(_app, _role)
    {
        bytes32 paramsHash = _params.length > 0 ? _saveParams(_params) : EMPTY_PARAM_HASH;
        _setPermission(_entity, _app, _role, paramsHash);
    }

    /**
    * @dev Revokes permission if allowed. This requires `msg.sender` to be the the permission manager
    * @notice Revoke from `_entity` the ability to perform actions requiring `_role` on `_app`
    * @param _entity Address of the whitelisted entity to revoke access from
    * @param _app Address of the app in which the role will be revoked
    * @param _role Identifier for the group of actions in app being revoked
    */
    function revokePermission(address _entity, address _app, bytes32 _role)
        external
        onlyPermissionManager(_app, _role)
    {
        _setPermission(_entity, _app, _role, NO_PERMISSION);
    }

    /**
    * @notice Set `_newManager` as the manager of `_role` in `_app`
    * @param _newManager Address for the new manager
    * @param _app Address of the app in which the permission management is being transferred
    * @param _role Identifier for the group of actions being transferred
    */
    function setPermissionManager(address _newManager, address _app, bytes32 _role)
        external
        onlyPermissionManager(_app, _role)
    {
        _setPermissionManager(_newManager, _app, _role);
    }

    /**
    * @notice Remove the manager of `_role` in `_app`
    * @param _app Address of the app in which the permission is being unmanaged
    * @param _role Identifier for the group of actions being unmanaged
    */
    function removePermissionManager(address _app, bytes32 _role)
        external
        onlyPermissionManager(_app, _role)
    {
        _setPermissionManager(address(0), _app, _role);
    }

    /**
    * @notice Burn non-existent `_role` in `_app`, so no modification can be made to it (grant, revoke, permission manager)
    * @param _app Address of the app in which the permission is being burned
    * @param _role Identifier for the group of actions being burned
    */
    function createBurnedPermission(address _app, bytes32 _role)
        external
        auth(CREATE_PERMISSIONS_ROLE)
        noPermissionManager(_app, _role)
    {
        _setPermissionManager(BURN_ENTITY, _app, _role);
    }

    /**
    * @notice Burn `_role` in `_app`, so no modification can be made to it (grant, revoke, permission manager)
    * @param _app Address of the app in which the permission is being burned
    * @param _role Identifier for the group of actions being burned
    */
    function burnPermissionManager(address _app, bytes32 _role)
        external
        onlyPermissionManager(_app, _role)
    {
        _setPermissionManager(BURN_ENTITY, _app, _role);
    }

    /**
     * @notice Get parameters for permission array length
     * @param _entity Address of the whitelisted entity that will be able to perform the role
     * @param _app Address of the app
     * @param _role Identifier for a group of actions in app
     * @return Length of the array
     */
    function getPermissionParamsLength(address _entity, address _app, bytes32 _role) external view returns (uint) {
        return permissionParams[permissions[permissionHash(_entity, _app, _role)]].length;
    }

    /**
    * @notice Get parameter for permission
    * @param _entity Address of the whitelisted entity that will be able to perform the role
    * @param _app Address of the app
    * @param _role Identifier for a group of actions in app
    * @param _index Index of parameter in the array
    * @return Parameter (id, op, value)
    */
    function getPermissionParam(address _entity, address _app, bytes32 _role, uint _index)
        external
        view
        returns (uint8, uint8, uint240)
    {
        Param storage param = permissionParams[permissions[permissionHash(_entity, _app, _role)]][_index];
        return (param.id, param.op, param.value);
    }

    /**
    * @dev Get manager for permission
    * @param _app Address of the app
    * @param _role Identifier for a group of actions in app
    * @return address of the manager for the permission
    */
    function getPermissionManager(address _app, bytes32 _role) public view returns (address) {
        return permissionManager[roleHash(_app, _role)];
    }

    /**
    * @dev Function called by apps to check ACL on kernel or to check permission statu
    * @param _who Sender of the original call
    * @param _where Address of the app
    * @param _where Identifier for a group of actions in app
    * @param _how Permission parameters
    * @return boolean indicating whether the ACL allows the role or not
    */
    function hasPermission(address _who, address _where, bytes32 _what, bytes memory _how) public view returns (bool) {
        return hasPermission(_who, _where, _what, ConversionHelpers.dangerouslyCastBytesToUintArray(_how));
    }

    function hasPermission(address _who, address _where, bytes32 _what, uint256[] memory _how) public view returns (bool) {
        bytes32 whoParams = permissions[permissionHash(_who, _where, _what)];
        if (whoParams != NO_PERMISSION && evalParams(whoParams, _who, _where, _what, _how)) {
            return true;
        }

        bytes32 anyParams = permissions[permissionHash(ANY_ENTITY, _where, _what)];
        if (anyParams != NO_PERMISSION && evalParams(anyParams, ANY_ENTITY, _where, _what, _how)) {
            return true;
        }

        return false;
    }

    function hasPermission(address _who, address _where, bytes32 _what) public view returns (bool) {
        uint256[] memory empty = new uint256[](0);
        return hasPermission(_who, _where, _what, empty);
    }

    function evalParams(
        bytes32 _paramsHash,
        address _who,
        address _where,
        bytes32 _what,
        uint256[] _how
    ) public view returns (bool)
    {
        if (_paramsHash == EMPTY_PARAM_HASH) {
            return true;
        }

        return _evalParam(_paramsHash, 0, _who, _where, _what, _how);
    }

    /**
    * @dev Internal createPermission for access inside the kernel (on instantiation)
    */
    function _createPermission(address _entity, address _app, bytes32 _role, address _manager) internal {
        _setPermission(_entity, _app, _role, EMPTY_PARAM_HASH);
        _setPermissionManager(_manager, _app, _role);
    }

    /**
    * @dev Internal function called to actually save the permission
    */
    function _setPermission(address _entity, address _app, bytes32 _role, bytes32 _paramsHash) internal {
        permissions[permissionHash(_entity, _app, _role)] = _paramsHash;
        bool entityHasPermission = _paramsHash != NO_PERMISSION;
        bool permissionHasParams = entityHasPermission && _paramsHash != EMPTY_PARAM_HASH;

        emit SetPermission(_entity, _app, _role, entityHasPermission);
        if (permissionHasParams) {
            emit SetPermissionParams(_entity, _app, _role, _paramsHash);
        }
    }

    function _saveParams(uint256[] _encodedParams) internal returns (bytes32) {
        bytes32 paramHash = keccak256(abi.encodePacked(_encodedParams));
        Param[] storage params = permissionParams[paramHash];

        if (params.length == 0) { // params not saved before
            for (uint256 i = 0; i < _encodedParams.length; i++) {
                uint256 encodedParam = _encodedParams[i];
                Param memory param = Param(decodeParamId(encodedParam), decodeParamOp(encodedParam), uint240(encodedParam));
                params.push(param);
            }
        }

        return paramHash;
    }

    function _evalParam(
        bytes32 _paramsHash,
        uint32 _paramId,
        address _who,
        address _where,
        bytes32 _what,
        uint256[] _how
    ) internal view returns (bool)
    {
        if (_paramId >= permissionParams[_paramsHash].length) {
            return false; // out of bounds
        }

        Param memory param = permissionParams[_paramsHash][_paramId];

        if (param.id == LOGIC_OP_PARAM_ID) {
            return _evalLogic(param, _paramsHash, _who, _where, _what, _how);
        }

        uint256 value;
        uint256 comparedTo = uint256(param.value);

        // get value
        if (param.id == ORACLE_PARAM_ID) {
            value = checkOracle(IACLOracle(param.value), _who, _where, _what, _how) ? 1 : 0;
            comparedTo = 1;
        } else if (param.id == BLOCK_NUMBER_PARAM_ID) {
            value = getBlockNumber();
        } else if (param.id == TIMESTAMP_PARAM_ID) {
            value = getTimestamp();
        } else if (param.id == PARAM_VALUE_PARAM_ID) {
            value = uint256(param.value);
        } else {
            if (param.id >= _how.length) {
                return false;
            }
            value = uint256(uint240(_how[param.id])); // force lost precision
        }

        if (Op(param.op) == Op.RET) {
            return uint256(value) > 0;
        }

        return compare(value, Op(param.op), comparedTo);
    }

    function _evalLogic(Param _param, bytes32 _paramsHash, address _who, address _where, bytes32 _what, uint256[] _how)
        internal
        view
        returns (bool)
    {
        if (Op(_param.op) == Op.IF_ELSE) {
            uint32 conditionParam;
            uint32 successParam;
            uint32 failureParam;

            (conditionParam, successParam, failureParam) = decodeParamsList(uint256(_param.value));
            bool result = _evalParam(_paramsHash, conditionParam, _who, _where, _what, _how);

            return _evalParam(_paramsHash, result ? successParam : failureParam, _who, _where, _what, _how);
        }

        uint32 param1;
        uint32 param2;

        (param1, param2,) = decodeParamsList(uint256(_param.value));
        bool r1 = _evalParam(_paramsHash, param1, _who, _where, _what, _how);

        if (Op(_param.op) == Op.NOT) {
            return !r1;
        }

        if (r1 && Op(_param.op) == Op.OR) {
            return true;
        }

        if (!r1 && Op(_param.op) == Op.AND) {
            return false;
        }

        bool r2 = _evalParam(_paramsHash, param2, _who, _where, _what, _how);

        if (Op(_param.op) == Op.XOR) {
            return r1 != r2;
        }

        return r2; // both or and and depend on result of r2 after checks
    }

    function compare(uint256 _a, Op _op, uint256 _b) internal pure returns (bool) {
        if (_op == Op.EQ)  return _a == _b;                              // solium-disable-line lbrace
        if (_op == Op.NEQ) return _a != _b;                              // solium-disable-line lbrace
        if (_op == Op.GT)  return _a > _b;                               // solium-disable-line lbrace
        if (_op == Op.LT)  return _a < _b;                               // solium-disable-line lbrace
        if (_op == Op.GTE) return _a >= _b;                              // solium-disable-line lbrace
        if (_op == Op.LTE) return _a <= _b;                              // solium-disable-line lbrace
        return false;
    }

    function checkOracle(IACLOracle _oracleAddr, address _who, address _where, bytes32 _what, uint256[] _how) internal view returns (bool) {
        bytes4 sig = _oracleAddr.canPerform.selector;

        // a raw call is required so we can return false if the call reverts, rather than reverting
        bytes memory checkCalldata = abi.encodeWithSelector(sig, _who, _where, _what, _how);

        bool ok;
        assembly {
            // send all available gas; if the oracle eats up all the gas, we will eventually revert
            // note that we are currently guaranteed to still have some gas after the call from
            // EIP-150's 63/64 gas forward rule
            ok := staticcall(gas, _oracleAddr, add(checkCalldata, 0x20), mload(checkCalldata), 0, 0)
        }

        if (!ok) {
            return false;
        }

        uint256 size;
        assembly { size := returndatasize }
        if (size != 32) {
            return false;
        }

        bool result;
        assembly {
            let ptr := mload(0x40)       // get next free memory ptr
            returndatacopy(ptr, 0, size) // copy return from above `staticcall`
            result := mload(ptr)         // read data at ptr and set it to result
            mstore(ptr, 0)               // set pointer memory to 0 so it still is the next free ptr
        }

        return result;
    }

    /**
    * @dev Internal function that sets management
    */
    function _setPermissionManager(address _newManager, address _app, bytes32 _role) internal {
        permissionManager[roleHash(_app, _role)] = _newManager;
        emit ChangePermissionManager(_app, _role, _newManager);
    }

    function roleHash(address _where, bytes32 _what) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked("ROLE", _where, _what));
    }

    function permissionHash(address _who, address _where, bytes32 _what) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked("PERMISSION", _who, _where, _what));
    }
}

// File: contracts/evmscript/ScriptHelpers.sol

/*
 * SPDX-License-Identifier:    MIT
 */

pragma solidity ^0.4.24;


library ScriptHelpers {
    function getSpecId(bytes _script) internal pure returns (uint32) {
        return uint32At(_script, 0);
    }

    function uint256At(bytes _data, uint256 _location) internal pure returns (uint256 result) {
        assembly {
            result := mload(add(_data, add(0x20, _location)))
        }
    }

    function addressAt(bytes _data, uint256 _location) internal pure returns (address result) {
        uint256 word = uint256At(_data, _location);

        assembly {
            result := div(and(word, 0xffffffffffffffffffffffffffffffffffffffff000000000000000000000000),
            0x1000000000000000000000000)
        }
    }

    function uint32At(bytes _data, uint256 _location) internal pure returns (uint32 result) {
        uint256 word = uint256At(_data, _location);

        assembly {
            result := div(and(word, 0xffffffff00000000000000000000000000000000000000000000000000000000),
            0x100000000000000000000000000000000000000000000000000000000)
        }
    }

    function locationOf(bytes _data, uint256 _location) internal pure returns (uint256 result) {
        assembly {
            result := add(_data, add(0x20, _location))
        }
    }

    function toBytes(bytes4 _sig) internal pure returns (bytes) {
        bytes memory payload = new bytes(4);
        assembly { mstore(add(payload, 0x20), _sig) }
        return payload;
    }
}

// File: contracts/evmscript/EVMScriptRegistry.sol

pragma solidity 0.4.24;






/* solium-disable function-order */
// Allow public initialize() to be first
contract EVMScriptRegistry is IEVMScriptRegistry, EVMScriptRegistryConstants, AragonApp {
    using ScriptHelpers for bytes;

    /* Hardcoded constants to save gas
    bytes32 public constant REGISTRY_ADD_EXECUTOR_ROLE = keccak256("REGISTRY_ADD_EXECUTOR_ROLE");
    bytes32 public constant REGISTRY_MANAGER_ROLE = keccak256("REGISTRY_MANAGER_ROLE");
    */
    bytes32 public constant REGISTRY_ADD_EXECUTOR_ROLE = 0xc4e90f38eea8c4212a009ca7b8947943ba4d4a58d19b683417f65291d1cd9ed2;
    // WARN: Manager can censor all votes and the like happening in an org
    bytes32 public constant REGISTRY_MANAGER_ROLE = 0xf7a450ef335e1892cb42c8ca72e7242359d7711924b75db5717410da3f614aa3;

    uint256 internal constant SCRIPT_START_LOCATION = 4;

    string private constant ERROR_INEXISTENT_EXECUTOR = "EVMREG_INEXISTENT_EXECUTOR";
    string private constant ERROR_EXECUTOR_ENABLED = "EVMREG_EXECUTOR_ENABLED";
    string private constant ERROR_EXECUTOR_DISABLED = "EVMREG_EXECUTOR_DISABLED";
    string private constant ERROR_SCRIPT_LENGTH_TOO_SHORT = "EVMREG_SCRIPT_LENGTH_TOO_SHORT";

    struct ExecutorEntry {
        IEVMScriptExecutor executor;
        bool enabled;
    }

    uint256 private executorsNextIndex;
    mapping (uint256 => ExecutorEntry) public executors;

    event EnableExecutor(uint256 indexed executorId, address indexed executorAddress);
    event DisableExecutor(uint256 indexed executorId, address indexed executorAddress);

    modifier executorExists(uint256 _executorId) {
        require(_executorId > 0 && _executorId < executorsNextIndex, ERROR_INEXISTENT_EXECUTOR);
        _;
    }

    /**
    * @notice Initialize the registry
    */
    function initialize() public onlyInit {
        initialized();
        // Create empty record to begin executor IDs at 1
        executorsNextIndex = 1;
    }

    /**
    * @notice Add a new script executor with address `_executor` to the registry
    * @param _executor Address of the IEVMScriptExecutor that will be added to the registry
    * @return id Identifier of the executor in the registry
    */
    function addScriptExecutor(IEVMScriptExecutor _executor) external auth(REGISTRY_ADD_EXECUTOR_ROLE) returns (uint256 id) {
        uint256 executorId = executorsNextIndex++;
        executors[executorId] = ExecutorEntry(_executor, true);
        emit EnableExecutor(executorId, _executor);
        return executorId;
    }

    /**
    * @notice Disable script executor with ID `_executorId`
    * @param _executorId Identifier of the executor in the registry
    */
    function disableScriptExecutor(uint256 _executorId)
        external
        authP(REGISTRY_MANAGER_ROLE, arr(_executorId))
    {
        // Note that we don't need to check for an executor's existence in this case, as only
        // existing executors can be enabled
        ExecutorEntry storage executorEntry = executors[_executorId];
        require(executorEntry.enabled, ERROR_EXECUTOR_DISABLED);
        executorEntry.enabled = false;
        emit DisableExecutor(_executorId, executorEntry.executor);
    }

    /**
    * @notice Enable script executor with ID `_executorId`
    * @param _executorId Identifier of the executor in the registry
    */
    function enableScriptExecutor(uint256 _executorId)
        external
        authP(REGISTRY_MANAGER_ROLE, arr(_executorId))
        executorExists(_executorId)
    {
        ExecutorEntry storage executorEntry = executors[_executorId];
        require(!executorEntry.enabled, ERROR_EXECUTOR_ENABLED);
        executorEntry.enabled = true;
        emit EnableExecutor(_executorId, executorEntry.executor);
    }

    /**
    * @dev Get the script executor that can execute a particular script based on its first 4 bytes
    * @param _script EVMScript being inspected
    */
    function getScriptExecutor(bytes _script) public view returns (IEVMScriptExecutor) {
        require(_script.length >= SCRIPT_START_LOCATION, ERROR_SCRIPT_LENGTH_TOO_SHORT);
        uint256 id = _script.getSpecId();

        // Note that we don't need to check for an executor's existence in this case, as only
        // existing executors can be enabled
        ExecutorEntry storage entry = executors[id];
        return entry.enabled ? entry.executor : IEVMScriptExecutor(0);
    }
}

// File: contracts/evmscript/executors/BaseEVMScriptExecutor.sol

/*
 * SPDX-License-Identifier:    MIT
 */

pragma solidity ^0.4.24;




contract BaseEVMScriptExecutor is IEVMScriptExecutor, Autopetrified {
    uint256 internal constant SCRIPT_START_LOCATION = 4;
}

// File: contracts/evmscript/executors/CallsScript.sol

pragma solidity 0.4.24;

// Inspired by https://github.com/reverendus/tx-manager




contract CallsScript is BaseEVMScriptExecutor {
    using ScriptHelpers for bytes;

    /* Hardcoded constants to save gas
    bytes32 internal constant EXECUTOR_TYPE = keccak256("CALLS_SCRIPT");
    */
    bytes32 internal constant EXECUTOR_TYPE = 0x2dc858a00f3e417be1394b87c07158e989ec681ce8cc68a9093680ac1a870302;

    string private constant ERROR_BLACKLISTED_CALL = "EVMCALLS_BLACKLISTED_CALL";
    string private constant ERROR_INVALID_LENGTH = "EVMCALLS_INVALID_LENGTH";

    /* This is manually crafted in assembly
    string private constant ERROR_CALL_REVERTED = "EVMCALLS_CALL_REVERTED";
    */

    event LogScriptCall(address indexed sender, address indexed src, address indexed dst);

    /**
    * @notice Executes a number of call scripts
    * @param _script [ specId (uint32) ] many calls with this structure ->
    *    [ to (address: 20 bytes) ] [ calldataLength (uint32: 4 bytes) ] [ calldata (calldataLength bytes) ]
    * @param _blacklist Addresses the script cannot call to, or will revert.
    * @return Always returns empty byte array
    */
    function execScript(bytes _script, bytes, address[] _blacklist) external isInitialized returns (bytes) {
        uint256 location = SCRIPT_START_LOCATION; // first 32 bits are spec id
        while (location < _script.length) {
            // Check there's at least address + calldataLength available
            require(_script.length - location >= 0x18, ERROR_INVALID_LENGTH);

            address contractAddress = _script.addressAt(location);
            // Check address being called is not blacklist
            for (uint256 i = 0; i < _blacklist.length; i++) {
                require(contractAddress != _blacklist[i], ERROR_BLACKLISTED_CALL);
            }

            // logged before execution to ensure event ordering in receipt
            // if failed entire execution is reverted regardless
            emit LogScriptCall(msg.sender, address(this), contractAddress);

            uint256 calldataLength = uint256(_script.uint32At(location + 0x14));
            uint256 startOffset = location + 0x14 + 0x04;
            uint256 calldataStart = _script.locationOf(startOffset);

            // compute end of script / next location
            location = startOffset + calldataLength;
            require(location <= _script.length, ERROR_INVALID_LENGTH);

            bool success;
            assembly {
                success := call(
                    sub(gas, 5000),       // forward gas left - 5000
                    contractAddress,      // address
                    0,                    // no value
                    calldataStart,        // calldata start
                    calldataLength,       // calldata length
                    0,                    // don't write output
                    0                     // don't write output
                )

                switch success
                case 0 {
                    let ptr := mload(0x40)

                    switch returndatasize
                    case 0 {
                        // No error data was returned, revert with "EVMCALLS_CALL_REVERTED"
                        // See remix: doing a `revert("EVMCALLS_CALL_REVERTED")` always results in
                        // this memory layout
                        mstore(ptr, 0x08c379a000000000000000000000000000000000000000000000000000000000)         // error identifier
                        mstore(add(ptr, 0x04), 0x0000000000000000000000000000000000000000000000000000000000000020) // starting offset
                        mstore(add(ptr, 0x24), 0x0000000000000000000000000000000000000000000000000000000000000016) // reason length
                        mstore(add(ptr, 0x44), 0x45564d43414c4c535f43414c4c5f524556455254454400000000000000000000) // reason

                        revert(ptr, 100) // 100 = 4 + 3 * 32 (error identifier + 3 words for the ABI encoded error)
                    }
                    default {
                        // Forward the full error data
                        returndatacopy(ptr, 0, returndatasize)
                        revert(ptr, returndatasize)
                    }
                }
                default { }
            }
        }
        // No need to allocate empty bytes for the return as this can only be called via an delegatecall
        // (due to the isInitialized modifier)
    }

    function executorType() external pure returns (bytes32) {
        return EXECUTOR_TYPE;
    }
}

// File: contracts/factory/EVMScriptRegistryFactory.sol

pragma solidity 0.4.24;







contract EVMScriptRegistryFactory is EVMScriptRegistryConstants {
    EVMScriptRegistry public baseReg;
    IEVMScriptExecutor public baseCallScript;

    /**
    * @notice Create a new EVMScriptRegistryFactory.
    */
    constructor() public {
        baseReg = new EVMScriptRegistry();
        baseCallScript = IEVMScriptExecutor(new CallsScript());
    }

    /**
    * @notice Install a new pinned instance of EVMScriptRegistry on `_dao`.
    * @param _dao Kernel
    * @return Installed EVMScriptRegistry
    */
    function newEVMScriptRegistry(Kernel _dao) public returns (EVMScriptRegistry reg) {
        bytes memory initPayload = abi.encodeWithSelector(reg.initialize.selector);
        reg = EVMScriptRegistry(_dao.newPinnedAppInstance(EVMSCRIPT_REGISTRY_APP_ID, baseReg, initPayload, true));

        ACL acl = ACL(_dao.acl());

        acl.createPermission(this, reg, reg.REGISTRY_ADD_EXECUTOR_ROLE(), this);

        reg.addScriptExecutor(baseCallScript);     // spec 1 = CallsScript

        // Clean up the permissions
        acl.revokePermission(this, reg, reg.REGISTRY_ADD_EXECUTOR_ROLE());
        acl.removePermissionManager(reg, reg.REGISTRY_ADD_EXECUTOR_ROLE());

        return reg;
    }
}

// File: contracts/factory/DAOFactory.sol

pragma solidity 0.4.24;








contract DAOFactory {
    IKernel public baseKernel;
    IACL public baseACL;
    EVMScriptRegistryFactory public regFactory;

    event DeployDAO(address dao);
    event DeployEVMScriptRegistry(address reg);

    /**
    * @notice Create a new DAOFactory, creating DAOs with Kernels proxied to `_baseKernel`, ACLs proxied to `_baseACL`, and new EVMScriptRegistries created from `_regFactory`.
    * @param _baseKernel Base Kernel
    * @param _baseACL Base ACL
    * @param _regFactory EVMScriptRegistry factory
    */
    constructor(IKernel _baseKernel, IACL _baseACL, EVMScriptRegistryFactory _regFactory) public {
        // No need to init as it cannot be killed by devops199
        if (address(_regFactory) != address(0)) {
            regFactory = _regFactory;
        }

        baseKernel = _baseKernel;
        baseACL = _baseACL;
    }

    /**
    * @notice Create a new DAO with `_root` set as the initial admin
    * @param _root Address that will be granted control to setup DAO permissions
    * @return Newly created DAO
    */
    function newDAO(address _root) public returns (Kernel) {
        Kernel dao = Kernel(new KernelProxy(baseKernel));

        if (address(regFactory) == address(0)) {
            dao.initialize(baseACL, _root);
        } else {
            dao.initialize(baseACL, this);

            ACL acl = ACL(dao.acl());
            bytes32 permRole = acl.CREATE_PERMISSIONS_ROLE();
            bytes32 appManagerRole = dao.APP_MANAGER_ROLE();

            acl.grantPermission(regFactory, acl, permRole);

            acl.createPermission(regFactory, dao, appManagerRole, this);

            EVMScriptRegistry reg = regFactory.newEVMScriptRegistry(dao);
            emit DeployEVMScriptRegistry(address(reg));

            // Clean up permissions
            // First, completely reset the APP_MANAGER_ROLE
            acl.revokePermission(regFactory, dao, appManagerRole);
            acl.removePermissionManager(dao, appManagerRole);

            // Then, make root the only holder and manager of CREATE_PERMISSIONS_ROLE
            acl.revokePermission(regFactory, acl, permRole);
            acl.revokePermission(this, acl, permRole);
            acl.grantPermission(_root, acl, permRole);
            acl.setPermissionManager(_root, acl, permRole);
        }

        emit DeployDAO(address(dao));

        return dao;
    }
}

// File: contracts/acl/IACL.sol

/*
 * SPDX-License-Identitifer:    MIT
 */

pragma solidity ^0.4.24;


interface IACL {
    function initialize(address permissionsCreator) external;

    // TODO: this should be external
    // See https://github.com/ethereum/solidity/issues/4832
    function hasPermission(address who, address where, bytes32 what, bytes how) public view returns (bool);
}

// File: contracts/common/IVaultRecoverable.sol

/*
 * SPDX-License-Identitifer:    MIT
 */

pragma solidity ^0.4.24;


interface IVaultRecoverable {
    event RecoverToVault(address indexed vault, address indexed token, uint256 amount);

    function transferToVault(address token) external;

    function allowRecoverability(address token) external view returns (bool);
    function getRecoveryVault() external view returns (address);
}

// File: contracts/kernel/IKernel.sol

/*
 * SPDX-License-Identitifer:    MIT
 */

pragma solidity ^0.4.24;




interface IKernelEvents {
    event SetApp(bytes32 indexed namespace, bytes32 indexed appId, address app);
}


// This should be an interface, but interfaces can't inherit yet :(
contract IKernel is IKernelEvents, IVaultRecoverable {
    function acl() public view returns (IACL);
    function hasPermission(address who, address where, bytes32 what, bytes how) public view returns (bool);

    function setApp(bytes32 namespace, bytes32 appId, address app) public;
    function getApp(bytes32 namespace, bytes32 appId) public view returns (address);
}

// File: contracts/kernel/KernelConstants.sol

/*
 * SPDX-License-Identitifer:    MIT
 */

pragma solidity ^0.4.24;


contract KernelAppIds {
    /* Hardcoded constants to save gas
    bytes32 internal constant KERNEL_CORE_APP_ID = apmNamehash("kernel");
    bytes32 internal constant KERNEL_DEFAULT_ACL_APP_ID = apmNamehash("acl");
    bytes32 internal constant KERNEL_DEFAULT_VAULT_APP_ID = apmNamehash("vault");
    */
    bytes32 internal constant KERNEL_CORE_APP_ID = 0x3b4bf6bf3ad5000ecf0f989d5befde585c6860fea3e574a4fab4c49d1c177d9c;
    bytes32 internal constant KERNEL_DEFAULT_ACL_APP_ID = 0xe3262375f45a6e2026b7e7b18c2b807434f2508fe1a2a3dfb493c7df8f4aad6a;
    bytes32 internal constant KERNEL_DEFAULT_VAULT_APP_ID = 0x7e852e0fcfce6551c13800f1e7476f982525c2b5277ba14b24339c68416336d1;
}


contract KernelNamespaceConstants {
    /* Hardcoded constants to save gas
    bytes32 internal constant KERNEL_CORE_NAMESPACE = keccak256("core");
    bytes32 internal constant KERNEL_APP_BASES_NAMESPACE = keccak256("base");
    bytes32 internal constant KERNEL_APP_ADDR_NAMESPACE = keccak256("app");
    */
    bytes32 internal constant KERNEL_CORE_NAMESPACE = 0xc681a85306374a5ab27f0bbc385296a54bcd314a1948b6cf61c4ea1bc44bb9f8;
    bytes32 internal constant KERNEL_APP_BASES_NAMESPACE = 0xf1f3eb40f5bc1ad1344716ced8b8a0431d840b5783aea1fd01786bc26f35ac0f;
    bytes32 internal constant KERNEL_APP_ADDR_NAMESPACE = 0xd6f028ca0e8edb4a8c9757ca4fdccab25fa1e0317da1188108f7d2dee14902fb;
}

// File: contracts/kernel/KernelStorage.sol

pragma solidity 0.4.24;


contract KernelStorage {
    // namespace => app id => address
    mapping (bytes32 => mapping (bytes32 => address)) public apps;
    bytes32 public recoveryVaultAppId;
}

// File: contracts/acl/ACLSyntaxSugar.sol

/*
 * SPDX-License-Identitifer:    MIT
 */

pragma solidity ^0.4.24;


contract ACLSyntaxSugar {
    function arr() internal pure returns (uint256[]) {
        return new uint256[](0);
    }

    function arr(bytes32 _a) internal pure returns (uint256[] r) {
        return arr(uint256(_a));
    }

    function arr(bytes32 _a, bytes32 _b) internal pure returns (uint256[] r) {
        return arr(uint256(_a), uint256(_b));
    }

    function arr(address _a) internal pure returns (uint256[] r) {
        return arr(uint256(_a));
    }

    function arr(address _a, address _b) internal pure returns (uint256[] r) {
        return arr(uint256(_a), uint256(_b));
    }

    function arr(address _a, uint256 _b, uint256 _c) internal pure returns (uint256[] r) {
        return arr(uint256(_a), _b, _c);
    }

    function arr(address _a, uint256 _b, uint256 _c, uint256 _d) internal pure returns (uint256[] r) {
        return arr(uint256(_a), _b, _c, _d);
    }

    function arr(address _a, uint256 _b) internal pure returns (uint256[] r) {
        return arr(uint256(_a), uint256(_b));
    }

    function arr(address _a, address _b, uint256 _c, uint256 _d, uint256 _e) internal pure returns (uint256[] r) {
        return arr(uint256(_a), uint256(_b), _c, _d, _e);
    }

    function arr(address _a, address _b, address _c) internal pure returns (uint256[] r) {
        return arr(uint256(_a), uint256(_b), uint256(_c));
    }

    function arr(address _a, address _b, uint256 _c) internal pure returns (uint256[] r) {
        return arr(uint256(_a), uint256(_b), uint256(_c));
    }

    function arr(uint256 _a) internal pure returns (uint256[] r) {
        r = new uint256[](1);
        r[0] = _a;
    }

    function arr(uint256 _a, uint256 _b) internal pure returns (uint256[] r) {
        r = new uint256[](2);
        r[0] = _a;
        r[1] = _b;
    }

    function arr(uint256 _a, uint256 _b, uint256 _c) internal pure returns (uint256[] r) {
        r = new uint256[](3);
        r[0] = _a;
        r[1] = _b;
        r[2] = _c;
    }

    function arr(uint256 _a, uint256 _b, uint256 _c, uint256 _d) internal pure returns (uint256[] r) {
        r = new uint256[](4);
        r[0] = _a;
        r[1] = _b;
        r[2] = _c;
        r[3] = _d;
    }

    function arr(uint256 _a, uint256 _b, uint256 _c, uint256 _d, uint256 _e) internal pure returns (uint256[] r) {
        r = new uint256[](5);
        r[0] = _a;
        r[1] = _b;
        r[2] = _c;
        r[3] = _d;
        r[4] = _e;
    }
}


contract ACLHelpers {
    function decodeParamOp(uint256 _x) internal pure returns (uint8 b) {
        return uint8(_x >> (8 * 30));
    }

    function decodeParamId(uint256 _x) internal pure returns (uint8 b) {
        return uint8(_x >> (8 * 31));
    }

    function decodeParamsList(uint256 _x) internal pure returns (uint32 a, uint32 b, uint32 c) {
        a = uint32(_x);
        b = uint32(_x >> (8 * 4));
        c = uint32(_x >> (8 * 8));
    }
}

// File: contracts/common/ConversionHelpers.sol

pragma solidity ^0.4.24;


library ConversionHelpers {
    string private constant ERROR_IMPROPER_LENGTH = "CONVERSION_IMPROPER_LENGTH";

    function dangerouslyCastUintArrayToBytes(uint256[] memory _input) internal pure returns (bytes memory output) {
        // Force cast the uint256[] into a bytes array, by overwriting its length
        // Note that the bytes array doesn't need to be initialized as we immediately overwrite it
        // with the input and a new length. The input becomes invalid from this point forward.
        uint256 byteLength = _input.length * 32;
        assembly {
            output := _input
            mstore(output, byteLength)
        }
    }

    function dangerouslyCastBytesToUintArray(bytes memory _input) internal pure returns (uint256[] memory output) {
        // Force cast the bytes array into a uint256[], by overwriting its length
        // Note that the uint256[] doesn't need to be initialized as we immediately overwrite it
        // with the input and a new length. The input becomes invalid from this point forward.
        uint256 intsLength = _input.length / 32;
        require(_input.length == intsLength * 32, ERROR_IMPROPER_LENGTH);

        assembly {
            output := _input
            mstore(output, intsLength)
        }
    }
}

// File: contracts/common/IsContract.sol

/*
 * SPDX-License-Identitifer:    MIT
 */

pragma solidity ^0.4.24;


contract IsContract {
    /*
    * NOTE: this should NEVER be used for authentication
    * (see pitfalls: https://github.com/fergarrui/ethereum-security/tree/master/contracts/extcodesize).
    *
    * This is only intended to be used as a sanity check that an address is actually a contract,
    * RATHER THAN an address not being a contract.
    */
    function isContract(address _target) internal view returns (bool) {
        if (_target == address(0)) {
            return false;
        }

        uint256 size;
        assembly { size := extcodesize(_target) }
        return size > 0;
    }
}

// File: contracts/common/Uint256Helpers.sol

pragma solidity ^0.4.24;


library Uint256Helpers {
    uint256 private constant MAX_UINT64 = uint64(-1);

    string private constant ERROR_NUMBER_TOO_BIG = "UINT64_NUMBER_TOO_BIG";

    function toUint64(uint256 a) internal pure returns (uint64) {
        require(a <= MAX_UINT64, ERROR_NUMBER_TOO_BIG);
        return uint64(a);
    }
}

// File: contracts/common/TimeHelpers.sol

/*
 * SPDX-License-Identitifer:    MIT
 */

pragma solidity ^0.4.24;



contract TimeHelpers {
    using Uint256Helpers for uint256;

    /**
    * @dev Returns the current block number.
    *      Using a function rather than `block.number` allows us to easily mock the block number in
    *      tests.
    */
    function getBlockNumber() internal view returns (uint256) {
        return block.number;
    }

    /**
    * @dev Returns the current block number, converted to uint64.
    *      Using a function rather than `block.number` allows us to easily mock the block number in
    *      tests.
    */
    function getBlockNumber64() internal view returns (uint64) {
        return getBlockNumber().toUint64();
    }

    /**
    * @dev Returns the current timestamp.
    *      Using a function rather than `block.timestamp` allows us to easily mock it in
    *      tests.
    */
    function getTimestamp() internal view returns (uint256) {
        return block.timestamp; // solium-disable-line security/no-block-members
    }

    /**
    * @dev Returns the current timestamp, converted to uint64.
    *      Using a function rather than `block.timestamp` allows us to easily mock it in
    *      tests.
    */
    function getTimestamp64() internal view returns (uint64) {
        return getTimestamp().toUint64();
    }
}

// File: contracts/common/UnstructuredStorage.sol

/*
 * SPDX-License-Identitifer:    MIT
 */

pragma solidity ^0.4.24;


library UnstructuredStorage {
    function getStorageBool(bytes32 position) internal view returns (bool data) {
        assembly { data := sload(position) }
    }

    function getStorageAddress(bytes32 position) internal view returns (address data) {
        assembly { data := sload(position) }
    }

    function getStorageBytes32(bytes32 position) internal view returns (bytes32 data) {
        assembly { data := sload(position) }
    }

    function getStorageUint256(bytes32 position) internal view returns (uint256 data) {
        assembly { data := sload(position) }
    }

    function setStorageBool(bytes32 position, bool data) internal {
        assembly { sstore(position, data) }
    }

    function setStorageAddress(bytes32 position, address data) internal {
        assembly { sstore(position, data) }
    }

    function setStorageBytes32(bytes32 position, bytes32 data) internal {
        assembly { sstore(position, data) }
    }

    function setStorageUint256(bytes32 position, uint256 data) internal {
        assembly { sstore(position, data) }
    }
}

// File: contracts/common/Initializable.sol

/*
 * SPDX-License-Identitifer:    MIT
 */

pragma solidity ^0.4.24;




contract Initializable is TimeHelpers {
    using UnstructuredStorage for bytes32;

    // keccak256("aragonOS.initializable.initializationBlock")
    bytes32 internal constant INITIALIZATION_BLOCK_POSITION = 0xebb05b386a8d34882b8711d156f463690983dc47815980fb82aeeff1aa43579e;

    string private constant ERROR_ALREADY_INITIALIZED = "INIT_ALREADY_INITIALIZED";
    string private constant ERROR_NOT_INITIALIZED = "INIT_NOT_INITIALIZED";

    modifier onlyInit {
        require(getInitializationBlock() == 0, ERROR_ALREADY_INITIALIZED);
        _;
    }

    modifier isInitialized {
        require(hasInitialized(), ERROR_NOT_INITIALIZED);
        _;
    }

    /**
    * @return Block number in which the contract was initialized
    */
    function getInitializationBlock() public view returns (uint256) {
        return INITIALIZATION_BLOCK_POSITION.getStorageUint256();
    }

    /**
    * @return Whether the contract has been initialized by the time of the current block
    */
    function hasInitialized() public view returns (bool) {
        uint256 initializationBlock = getInitializationBlock();
        return initializationBlock != 0 && getBlockNumber() >= initializationBlock;
    }

    /**
    * @dev Function to be called by top level contract after initialization has finished.
    */
    function initialized() internal onlyInit {
        INITIALIZATION_BLOCK_POSITION.setStorageUint256(getBlockNumber());
    }

    /**
    * @dev Function to be called by top level contract after initialization to enable the contract
    *      at a future block number rather than immediately.
    */
    function initializedAt(uint256 _blockNumber) internal onlyInit {
        INITIALIZATION_BLOCK_POSITION.setStorageUint256(_blockNumber);
    }
}

// File: contracts/common/Petrifiable.sol

/*
 * SPDX-License-Identitifer:    MIT
 */

pragma solidity ^0.4.24;



contract Petrifiable is Initializable {
    // Use block UINT256_MAX (which should be never) as the initializable date
    uint256 internal constant PETRIFIED_BLOCK = uint256(-1);

    function isPetrified() public view returns (bool) {
        return getInitializationBlock() == PETRIFIED_BLOCK;
    }

    /**
    * @dev Function to be called by top level contract to prevent being initialized.
    *      Useful for freezing base contracts when they're used behind proxies.
    */
    function petrify() internal onlyInit {
        initializedAt(PETRIFIED_BLOCK);
    }
}

// File: contracts/lib/token/ERC20.sol

// See https://github.com/OpenZeppelin/openzeppelin-solidity/blob/a9f910d34f0ab33a1ae5e714f69f9596a02b4d91/contracts/token/ERC20/ERC20.sol

pragma solidity ^0.4.24;


/**
 * @title ERC20 interface
 * @dev see https://github.com/ethereum/EIPs/issues/20
 */
contract ERC20 {
    function totalSupply() public view returns (uint256);

    function balanceOf(address _who) public view returns (uint256);

    function allowance(address _owner, address _spender)
        public view returns (uint256);

    function transfer(address _to, uint256 _value) public returns (bool);

    function approve(address _spender, uint256 _value)
        public returns (bool);

    function transferFrom(address _from, address _to, uint256 _value)
        public returns (bool);

    event Transfer(
        address indexed from,
        address indexed to,
        uint256 value
    );

    event Approval(
        address indexed owner,
        address indexed spender,
        uint256 value
    );
}

// File: contracts/common/EtherTokenConstant.sol

/*
 * SPDX-License-Identitifer:    MIT
 */

pragma solidity ^0.4.24;


// aragonOS and aragon-apps rely on address(0) to denote native ETH, in
// contracts where both tokens and ETH are accepted
contract EtherTokenConstant {
    address internal constant ETH = address(0);
}

// File: contracts/common/SafeERC20.sol

// Inspired by AdEx (https://github.com/AdExNetwork/adex-protocol-eth/blob/b9df617829661a7518ee10f4cb6c4108659dd6d5/contracts/libs/SafeERC20.sol)
// and 0x (https://github.com/0xProject/0x-monorepo/blob/737d1dc54d72872e24abce5a1dbe1b66d35fa21a/contracts/protocol/contracts/protocol/AssetProxy/ERC20Proxy.sol#L143)

pragma solidity ^0.4.24;



library SafeERC20 {
    // Before 0.5, solidity has a mismatch between `address.transfer()` and `token.transfer()`:
    // https://github.com/ethereum/solidity/issues/3544
    bytes4 private constant TRANSFER_SELECTOR = 0xa9059cbb;

    string private constant ERROR_TOKEN_BALANCE_REVERTED = "SAFE_ERC_20_BALANCE_REVERTED";
    string private constant ERROR_TOKEN_ALLOWANCE_REVERTED = "SAFE_ERC_20_ALLOWANCE_REVERTED";

    function invokeAndCheckSuccess(address _addr, bytes memory _calldata)
        private
        returns (bool)
    {
        bool ret;
        assembly {
            let ptr := mload(0x40)    // free memory pointer

            let success := call(
                gas,                  // forward all gas
                _addr,                // address
                0,                    // no value
                add(_calldata, 0x20), // calldata start
                mload(_calldata),     // calldata length
                ptr,                  // write output over free memory
                0x20                  // uint256 return
            )

            if gt(success, 0) {
                // Check number of bytes returned from last function call
                switch returndatasize

                // No bytes returned: assume success
                case 0 {
                    ret := 1
                }

                // 32 bytes returned: check if non-zero
                case 0x20 {
                    // Only return success if returned data was true
                    // Already have output in ptr
                    ret := eq(mload(ptr), 1)
                }

                // Not sure what was returned: don't mark as success
                default { }
            }
        }
        return ret;
    }

    function staticInvoke(address _addr, bytes memory _calldata)
        private
        view
        returns (bool, uint256)
    {
        bool success;
        uint256 ret;
        assembly {
            let ptr := mload(0x40)    // free memory pointer

            success := staticcall(
                gas,                  // forward all gas
                _addr,                // address
                add(_calldata, 0x20), // calldata start
                mload(_calldata),     // calldata length
                ptr,                  // write output over free memory
                0x20                  // uint256 return
            )

            if gt(success, 0) {
                ret := mload(ptr)
            }
        }
        return (success, ret);
    }

    /**
    * @dev Same as a standards-compliant ERC20.transfer() that never reverts (returns false).
    *      Note that this makes an external call to the token.
    */
    function safeTransfer(ERC20 _token, address _to, uint256 _amount) internal returns (bool) {
        bytes memory transferCallData = abi.encodeWithSelector(
            TRANSFER_SELECTOR,
            _to,
            _amount
        );
        return invokeAndCheckSuccess(_token, transferCallData);
    }

    /**
    * @dev Same as a standards-compliant ERC20.transferFrom() that never reverts (returns false).
    *      Note that this makes an external call to the token.
    */
    function safeTransferFrom(ERC20 _token, address _from, address _to, uint256 _amount) internal returns (bool) {
        bytes memory transferFromCallData = abi.encodeWithSelector(
            _token.transferFrom.selector,
            _from,
            _to,
            _amount
        );
        return invokeAndCheckSuccess(_token, transferFromCallData);
    }

    /**
    * @dev Same as a standards-compliant ERC20.approve() that never reverts (returns false).
    *      Note that this makes an external call to the token.
    */
    function safeApprove(ERC20 _token, address _spender, uint256 _amount) internal returns (bool) {
        bytes memory approveCallData = abi.encodeWithSelector(
            _token.approve.selector,
            _spender,
            _amount
        );
        return invokeAndCheckSuccess(_token, approveCallData);
    }

    /**
    * @dev Static call into ERC20.balanceOf().
    * Reverts if the call fails for some reason (should never fail).
    */
    function staticBalanceOf(ERC20 _token, address _owner) internal view returns (uint256) {
        bytes memory balanceOfCallData = abi.encodeWithSelector(
            _token.balanceOf.selector,
            _owner
        );

        (bool success, uint256 tokenBalance) = staticInvoke(_token, balanceOfCallData);
        require(success, ERROR_TOKEN_BALANCE_REVERTED);

        return tokenBalance;
    }

    /**
    * @dev Static call into ERC20.allowance().
    * Reverts if the call fails for some reason (should never fail).
    */
    function staticAllowance(ERC20 _token, address _owner, address _spender) internal view returns (uint256) {
        bytes memory allowanceCallData = abi.encodeWithSelector(
            _token.allowance.selector,
            _owner,
            _spender
        );

        (bool success, uint256 allowance) = staticInvoke(_token, allowanceCallData);
        require(success, ERROR_TOKEN_ALLOWANCE_REVERTED);

        return allowance;
    }

    /**
    * @dev Static call into ERC20.totalSupply().
    * Reverts if the call fails for some reason (should never fail).
    */
    function staticTotalSupply(ERC20 _token) internal view returns (uint256) {
        bytes memory totalSupplyCallData = abi.encodeWithSelector(_token.totalSupply.selector);

        (bool success, uint256 totalSupply) = staticInvoke(_token, totalSupplyCallData);
        require(success, ERROR_TOKEN_ALLOWANCE_REVERTED);

        return totalSupply;
    }
}

// File: contracts/common/VaultRecoverable.sol

/*
 * SPDX-License-Identitifer:    MIT
 */

pragma solidity ^0.4.24;







contract VaultRecoverable is IVaultRecoverable, EtherTokenConstant, IsContract {
    using SafeERC20 for ERC20;

    string private constant ERROR_DISALLOWED = "RECOVER_DISALLOWED";
    string private constant ERROR_VAULT_NOT_CONTRACT = "RECOVER_VAULT_NOT_CONTRACT";
    string private constant ERROR_TOKEN_TRANSFER_FAILED = "RECOVER_TOKEN_TRANSFER_FAILED";

    /**
     * @notice Send funds to recovery Vault. This contract should never receive funds,
     *         but in case it does, this function allows one to recover them.
     * @param _token Token balance to be sent to recovery vault.
     */
    function transferToVault(address _token) external {
        require(allowRecoverability(_token), ERROR_DISALLOWED);
        address vault = getRecoveryVault();
        require(isContract(vault), ERROR_VAULT_NOT_CONTRACT);

        uint256 balance;
        if (_token == ETH) {
            balance = address(this).balance;
            vault.transfer(balance);
        } else {
            ERC20 token = ERC20(_token);
            balance = token.staticBalanceOf(this);
            require(token.safeTransfer(vault, balance), ERROR_TOKEN_TRANSFER_FAILED);
        }

        emit RecoverToVault(vault, _token, balance);
    }

    /**
    * @dev By default deriving from AragonApp makes it recoverable
    * @param token Token address that would be recovered
    * @return bool whether the app allows the recovery
    */
    function allowRecoverability(address token) public view returns (bool) {
        return true;
    }

    // Cast non-implemented interface to be public so we can use it internally
    function getRecoveryVault() public view returns (address);
}

// File: contracts/apps/AppStorage.sol

/*
 * SPDX-License-Identitifer:    MIT
 */

pragma solidity ^0.4.24;




contract AppStorage {
    using UnstructuredStorage for bytes32;

    /* Hardcoded constants to save gas
    bytes32 internal constant KERNEL_POSITION = keccak256("aragonOS.appStorage.kernel");
    bytes32 internal constant APP_ID_POSITION = keccak256("aragonOS.appStorage.appId");
    */
    bytes32 internal constant KERNEL_POSITION = 0x4172f0f7d2289153072b0a6ca36959e0cbe2efc3afe50fc81636caa96338137b;
    bytes32 internal constant APP_ID_POSITION = 0xd625496217aa6a3453eecb9c3489dc5a53e6c67b444329ea2b2cbc9ff547639b;

    function kernel() public view returns (IKernel) {
        return IKernel(KERNEL_POSITION.getStorageAddress());
    }

    function appId() public view returns (bytes32) {
        return APP_ID_POSITION.getStorageBytes32();
    }

    function setKernel(IKernel _kernel) internal {
        KERNEL_POSITION.setStorageAddress(address(_kernel));
    }

    function setAppId(bytes32 _appId) internal {
        APP_ID_POSITION.setStorageBytes32(_appId);
    }
}

// File: contracts/lib/misc/ERCProxy.sol

/*
 * SPDX-License-Identitifer:    MIT
 */

pragma solidity ^0.4.24;


contract ERCProxy {
    uint256 internal constant FORWARDING = 1;
    uint256 internal constant UPGRADEABLE = 2;

    function proxyType() public pure returns (uint256 proxyTypeId);
    function implementation() public view returns (address codeAddr);
}

// File: contracts/common/DelegateProxy.sol

pragma solidity 0.4.24;




contract DelegateProxy is ERCProxy, IsContract {
    uint256 internal constant FWD_GAS_LIMIT = 10000;

    /**
    * @dev Performs a delegatecall and returns whatever the delegatecall returned (entire context execution will return!)
    * @param _dst Destination address to perform the delegatecall
    * @param _calldata Calldata for the delegatecall
    */
    function delegatedFwd(address _dst, bytes _calldata) internal {
        require(isContract(_dst));
        uint256 fwdGasLimit = FWD_GAS_LIMIT;

        assembly {
            let result := delegatecall(sub(gas, fwdGasLimit), _dst, add(_calldata, 0x20), mload(_calldata), 0, 0)
            let size := returndatasize
            let ptr := mload(0x40)
            returndatacopy(ptr, 0, size)

            // revert instead of invalid() bc if the underlying call failed with invalid() it already wasted gas.
            // if the call returned error data, forward it
            switch result case 0 { revert(ptr, size) }
            default { return(ptr, size) }
        }
    }
}

// File: contracts/common/DepositableStorage.sol

pragma solidity 0.4.24;



contract DepositableStorage {
    using UnstructuredStorage for bytes32;

    // keccak256("aragonOS.depositableStorage.depositable")
    bytes32 internal constant DEPOSITABLE_POSITION = 0x665fd576fbbe6f247aff98f5c94a561e3f71ec2d3c988d56f12d342396c50cea;

    function isDepositable() public view returns (bool) {
        return DEPOSITABLE_POSITION.getStorageBool();
    }

    function setDepositable(bool _depositable) internal {
        DEPOSITABLE_POSITION.setStorageBool(_depositable);
    }
}

// File: contracts/common/DepositableDelegateProxy.sol

pragma solidity 0.4.24;




contract DepositableDelegateProxy is DepositableStorage, DelegateProxy {
    event ProxyDeposit(address sender, uint256 value);

    function () external payable {
        uint256 forwardGasThreshold = FWD_GAS_LIMIT;
        bytes32 isDepositablePosition = DEPOSITABLE_POSITION;

        // Optimized assembly implementation to prevent EIP-1884 from breaking deposits, reference code in Solidity:
        // https://github.com/aragon/aragonOS/blob/v4.2.1/contracts/common/DepositableDelegateProxy.sol#L10-L20
        assembly {
            // Continue only if the gas left is lower than the threshold for forwarding to the implementation code,
            // otherwise continue outside of the assembly block.
            if lt(gas, forwardGasThreshold) {
                // Only accept the deposit and emit an event if all of the following are true:
                // the proxy accepts deposits (isDepositable), msg.data.length == 0, and msg.value > 0
                if and(and(sload(isDepositablePosition), iszero(calldatasize)), gt(callvalue, 0)) {
                    // Equivalent Solidity code for emitting the event:
                    // emit ProxyDeposit(msg.sender, msg.value);

                    let logData := mload(0x40) // free memory pointer
                    mstore(logData, caller) // add 'msg.sender' to the log data (first event param)
                    mstore(add(logData, 0x20), callvalue) // add 'msg.value' to the log data (second event param)

                    // Emit an event with one topic to identify the event: keccak256('ProxyDeposit(address,uint256)') = 0x15ee...dee1
                    log1(logData, 0x40, 0x15eeaa57c7bd188c1388020bcadc2c436ec60d647d36ef5b9eb3c742217ddee1)

                    stop() // Stop. Exits execution context
                }

                // If any of above checks failed, revert the execution (if ETH was sent, it is returned to the sender)
                revert(0, 0)
            }
        }

        address target = implementation();
        delegatedFwd(target, msg.data);
    }
}

// File: contracts/apps/AppProxyBase.sol

pragma solidity 0.4.24;






contract AppProxyBase is AppStorage, DepositableDelegateProxy, KernelNamespaceConstants {
    /**
    * @dev Initialize AppProxy
    * @param _kernel Reference to organization kernel for the app
    * @param _appId Identifier for app
    * @param _initializePayload Payload for call to be made after setup to initialize
    */
    constructor(IKernel _kernel, bytes32 _appId, bytes _initializePayload) public {
        setKernel(_kernel);
        setAppId(_appId);

        // Implicit check that kernel is actually a Kernel
        // The EVM doesn't actually provide a way for us to make sure, but we can force a revert to
        // occur if the kernel is set to 0x0 or a non-code address when we try to call a method on
        // it.
        address appCode = getAppBase(_appId);

        // If initialize payload is provided, it will be executed
        if (_initializePayload.length > 0) {
            require(isContract(appCode));
            // Cannot make delegatecall as a delegateproxy.delegatedFwd as it
            // returns ending execution context and halts contract deployment
            require(appCode.delegatecall(_initializePayload));
        }
    }

    function getAppBase(bytes32 _appId) internal view returns (address) {
        return kernel().getApp(KERNEL_APP_BASES_NAMESPACE, _appId);
    }
}

// File: contracts/apps/AppProxyUpgradeable.sol

pragma solidity 0.4.24;



contract AppProxyUpgradeable is AppProxyBase {
    /**
    * @dev Initialize AppProxyUpgradeable (makes it an upgradeable Aragon app)
    * @param _kernel Reference to organization kernel for the app
    * @param _appId Identifier for app
    * @param _initializePayload Payload for call to be made after setup to initialize
    */
    constructor(IKernel _kernel, bytes32 _appId, bytes _initializePayload)
        AppProxyBase(_kernel, _appId, _initializePayload)
        public // solium-disable-line visibility-first
    {
        // solium-disable-previous-line no-empty-blocks
    }

    /**
     * @dev ERC897, the address the proxy would delegate calls to
     */
    function implementation() public view returns (address) {
        return getAppBase(appId());
    }

    /**
     * @dev ERC897, whether it is a forwarding (1) or an upgradeable (2) proxy
     */
    function proxyType() public pure returns (uint256 proxyTypeId) {
        return UPGRADEABLE;
    }
}

// File: contracts/apps/AppProxyPinned.sol

pragma solidity 0.4.24;





contract AppProxyPinned is IsContract, AppProxyBase {
    using UnstructuredStorage for bytes32;

    // keccak256("aragonOS.appStorage.pinnedCode")
    bytes32 internal constant PINNED_CODE_POSITION = 0xdee64df20d65e53d7f51cb6ab6d921a0a6a638a91e942e1d8d02df28e31c038e;

    /**
    * @dev Initialize AppProxyPinned (makes it an un-upgradeable Aragon app)
    * @param _kernel Reference to organization kernel for the app
    * @param _appId Identifier for app
    * @param _initializePayload Payload for call to be made after setup to initialize
    */
    constructor(IKernel _kernel, bytes32 _appId, bytes _initializePayload)
        AppProxyBase(_kernel, _appId, _initializePayload)
        public // solium-disable-line visibility-first
    {
        setPinnedCode(getAppBase(_appId));
        require(isContract(pinnedCode()));
    }

    /**
     * @dev ERC897, the address the proxy would delegate calls to
     */
    function implementation() public view returns (address) {
        return pinnedCode();
    }

    /**
     * @dev ERC897, whether it is a forwarding (1) or an upgradeable (2) proxy
     */
    function proxyType() public pure returns (uint256 proxyTypeId) {
        return FORWARDING;
    }

    function setPinnedCode(address _pinnedCode) internal {
        PINNED_CODE_POSITION.setStorageAddress(_pinnedCode);
    }

    function pinnedCode() internal view returns (address) {
        return PINNED_CODE_POSITION.getStorageAddress();
    }
}

// File: contracts/factory/AppProxyFactory.sol

pragma solidity 0.4.24;




contract AppProxyFactory {
    event NewAppProxy(address proxy, bool isUpgradeable, bytes32 appId);

    /**
    * @notice Create a new upgradeable app instance on `_kernel` with identifier `_appId`
    * @param _kernel App's Kernel reference
    * @param _appId Identifier for app
    * @return AppProxyUpgradeable
    */
    function newAppProxy(IKernel _kernel, bytes32 _appId) public returns (AppProxyUpgradeable) {
        return newAppProxy(_kernel, _appId, new bytes(0));
    }

    /**
    * @notice Create a new upgradeable app instance on `_kernel` with identifier `_appId` and initialization payload `_initializePayload`
    * @param _kernel App's Kernel reference
    * @param _appId Identifier for app
    * @return AppProxyUpgradeable
    */
    function newAppProxy(IKernel _kernel, bytes32 _appId, bytes _initializePayload) public returns (AppProxyUpgradeable) {
        AppProxyUpgradeable proxy = new AppProxyUpgradeable(_kernel, _appId, _initializePayload);
        emit NewAppProxy(address(proxy), true, _appId);
        return proxy;
    }

    /**
    * @notice Create a new pinned app instance on `_kernel` with identifier `_appId`
    * @param _kernel App's Kernel reference
    * @param _appId Identifier for app
    * @return AppProxyPinned
    */
    function newAppProxyPinned(IKernel _kernel, bytes32 _appId) public returns (AppProxyPinned) {
        return newAppProxyPinned(_kernel, _appId, new bytes(0));
    }

    /**
    * @notice Create a new pinned app instance on `_kernel` with identifier `_appId` and initialization payload `_initializePayload`
    * @param _kernel App's Kernel reference
    * @param _appId Identifier for app
    * @param _initializePayload Proxy initialization payload
    * @return AppProxyPinned
    */
    function newAppProxyPinned(IKernel _kernel, bytes32 _appId, bytes _initializePayload) public returns (AppProxyPinned) {
        AppProxyPinned proxy = new AppProxyPinned(_kernel, _appId, _initializePayload);
        emit NewAppProxy(address(proxy), false, _appId);
        return proxy;
    }
}

// File: contracts/kernel/Kernel.sol

pragma solidity 0.4.24;













// solium-disable-next-line max-len
contract Kernel is IKernel, KernelStorage, KernelAppIds, KernelNamespaceConstants, Petrifiable, IsContract, VaultRecoverable, AppProxyFactory, ACLSyntaxSugar {
    /* Hardcoded constants to save gas
    bytes32 public constant APP_MANAGER_ROLE = keccak256("APP_MANAGER_ROLE");
    */
    bytes32 public constant APP_MANAGER_ROLE = 0xb6d92708f3d4817afc106147d969e229ced5c46e65e0a5002a0d391287762bd0;

    string private constant ERROR_APP_NOT_CONTRACT = "KERNEL_APP_NOT_CONTRACT";
    string private constant ERROR_INVALID_APP_CHANGE = "KERNEL_INVALID_APP_CHANGE";
    string private constant ERROR_AUTH_FAILED = "KERNEL_AUTH_FAILED";

    /**
    * @dev Constructor that allows the deployer to choose if the base instance should be petrified immediately.
    * @param _shouldPetrify Immediately petrify this instance so that it can never be initialized
    */
    constructor(bool _shouldPetrify) public {
        if (_shouldPetrify) {
            petrify();
        }
    }

    /**
    * @dev Initialize can only be called once. It saves the block number in which it was initialized.
    * @notice Initialize this kernel instance along with its ACL and set `_permissionsCreator` as the entity that can create other permissions
    * @param _baseAcl Address of base ACL app
    * @param _permissionsCreator Entity that will be given permission over createPermission
    */
    function initialize(IACL _baseAcl, address _permissionsCreator) public onlyInit {
        initialized();

        // Set ACL base
        _setApp(KERNEL_APP_BASES_NAMESPACE, KERNEL_DEFAULT_ACL_APP_ID, _baseAcl);

        // Create ACL instance and attach it as the default ACL app
        IACL acl = IACL(newAppProxy(this, KERNEL_DEFAULT_ACL_APP_ID));
        acl.initialize(_permissionsCreator);
        _setApp(KERNEL_APP_ADDR_NAMESPACE, KERNEL_DEFAULT_ACL_APP_ID, acl);

        recoveryVaultAppId = KERNEL_DEFAULT_VAULT_APP_ID;
    }

    /**
    * @dev Create a new instance of an app linked to this kernel
    * @notice Create a new upgradeable instance of `_appId` app linked to the Kernel, setting its code to `_appBase`
    * @param _appId Identifier for app
    * @param _appBase Address of the app's base implementation
    * @return AppProxy instance
    */
    function newAppInstance(bytes32 _appId, address _appBase)
        public
        auth(APP_MANAGER_ROLE, arr(KERNEL_APP_BASES_NAMESPACE, _appId))
        returns (ERCProxy appProxy)
    {
        return newAppInstance(_appId, _appBase, new bytes(0), false);
    }

    /**
    * @dev Create a new instance of an app linked to this kernel and set its base
    *      implementation if it was not already set
    * @notice Create a new upgradeable instance of `_appId` app linked to the Kernel, setting its code to `_appBase`. `_setDefault ? 'Also sets it as the default app instance.':''`
    * @param _appId Identifier for app
    * @param _appBase Address of the app's base implementation
    * @param _initializePayload Payload for call made by the proxy during its construction to initialize
    * @param _setDefault Whether the app proxy app is the default one.
    *        Useful when the Kernel needs to know of an instance of a particular app,
    *        like Vault for escape hatch mechanism.
    * @return AppProxy instance
    */
    function newAppInstance(bytes32 _appId, address _appBase, bytes _initializePayload, bool _setDefault)
        public
        auth(APP_MANAGER_ROLE, arr(KERNEL_APP_BASES_NAMESPACE, _appId))
        returns (ERCProxy appProxy)
    {
        _setAppIfNew(KERNEL_APP_BASES_NAMESPACE, _appId, _appBase);
        appProxy = newAppProxy(this, _appId, _initializePayload);
        // By calling setApp directly and not the internal functions, we make sure the params are checked
        // and it will only succeed if sender has permissions to set something to the namespace.
        if (_setDefault) {
            setApp(KERNEL_APP_ADDR_NAMESPACE, _appId, appProxy);
        }
    }

    /**
    * @dev Create a new pinned instance of an app linked to this kernel
    * @notice Create a new non-upgradeable instance of `_appId` app linked to the Kernel, setting its code to `_appBase`.
    * @param _appId Identifier for app
    * @param _appBase Address of the app's base implementation
    * @return AppProxy instance
    */
    function newPinnedAppInstance(bytes32 _appId, address _appBase)
        public
        auth(APP_MANAGER_ROLE, arr(KERNEL_APP_BASES_NAMESPACE, _appId))
        returns (ERCProxy appProxy)
    {
        return newPinnedAppInstance(_appId, _appBase, new bytes(0), false);
    }

    /**
    * @dev Create a new pinned instance of an app linked to this kernel and set
    *      its base implementation if it was not already set
    * @notice Create a new non-upgradeable instance of `_appId` app linked to the Kernel, setting its code to `_appBase`. `_setDefault ? 'Also sets it as the default app instance.':''`
    * @param _appId Identifier for app
    * @param _appBase Address of the app's base implementation
    * @param _initializePayload Payload for call made by the proxy during its construction to initialize
    * @param _setDefault Whether the app proxy app is the default one.
    *        Useful when the Kernel needs to know of an instance of a particular app,
    *        like Vault for escape hatch mechanism.
    * @return AppProxy instance
    */
    function newPinnedAppInstance(bytes32 _appId, address _appBase, bytes _initializePayload, bool _setDefault)
        public
        auth(APP_MANAGER_ROLE, arr(KERNEL_APP_BASES_NAMESPACE, _appId))
        returns (ERCProxy appProxy)
    {
        _setAppIfNew(KERNEL_APP_BASES_NAMESPACE, _appId, _appBase);
        appProxy = newAppProxyPinned(this, _appId, _initializePayload);
        // By calling setApp directly and not the internal functions, we make sure the params are checked
        // and it will only succeed if sender has permissions to set something to the namespace.
        if (_setDefault) {
            setApp(KERNEL_APP_ADDR_NAMESPACE, _appId, appProxy);
        }
    }

    /**
    * @dev Set the resolving address of an app instance or base implementation
    * @notice Set the resolving address of `_appId` in namespace `_namespace` to `_app`
    * @param _namespace App namespace to use
    * @param _appId Identifier for app
    * @param _app Address of the app instance or base implementation
    * @return ID of app
    */
    function setApp(bytes32 _namespace, bytes32 _appId, address _app)
        public
        auth(APP_MANAGER_ROLE, arr(_namespace, _appId))
    {
        _setApp(_namespace, _appId, _app);
    }

    /**
    * @dev Set the default vault id for the escape hatch mechanism
    * @param _recoveryVaultAppId Identifier of the recovery vault app
    */
    function setRecoveryVaultAppId(bytes32 _recoveryVaultAppId)
        public
        auth(APP_MANAGER_ROLE, arr(KERNEL_APP_ADDR_NAMESPACE, _recoveryVaultAppId))
    {
        recoveryVaultAppId = _recoveryVaultAppId;
    }

    // External access to default app id and namespace constants to mimic default getters for constants
    /* solium-disable function-order, mixedcase */
    function CORE_NAMESPACE() external pure returns (bytes32) { return KERNEL_CORE_NAMESPACE; }
    function APP_BASES_NAMESPACE() external pure returns (bytes32) { return KERNEL_APP_BASES_NAMESPACE; }
    function APP_ADDR_NAMESPACE() external pure returns (bytes32) { return KERNEL_APP_ADDR_NAMESPACE; }
    function KERNEL_APP_ID() external pure returns (bytes32) { return KERNEL_CORE_APP_ID; }
    function DEFAULT_ACL_APP_ID() external pure returns (bytes32) { return KERNEL_DEFAULT_ACL_APP_ID; }
    /* solium-enable function-order, mixedcase */

    /**
    * @dev Get the address of an app instance or base implementation
    * @param _namespace App namespace to use
    * @param _appId Identifier for app
    * @return Address of the app
    */
    function getApp(bytes32 _namespace, bytes32 _appId) public view returns (address) {
        return apps[_namespace][_appId];
    }

    /**
    * @dev Get the address of the recovery Vault instance (to recover funds)
    * @return Address of the Vault
    */
    function getRecoveryVault() public view returns (address) {
        return apps[KERNEL_APP_ADDR_NAMESPACE][recoveryVaultAppId];
    }

    /**
    * @dev Get the installed ACL app
    * @return ACL app
    */
    function acl() public view returns (IACL) {
        return IACL(getApp(KERNEL_APP_ADDR_NAMESPACE, KERNEL_DEFAULT_ACL_APP_ID));
    }

    /**
    * @dev Function called by apps to check ACL on kernel or to check permission status
    * @param _who Sender of the original call
    * @param _where Address of the app
    * @param _what Identifier for a group of actions in app
    * @param _how Extra data for ACL auth
    * @return Boolean indicating whether the ACL allows the role or not.
    *         Always returns false if the kernel hasn't been initialized yet.
    */
    function hasPermission(address _who, address _where, bytes32 _what, bytes _how) public view returns (bool) {
        IACL defaultAcl = acl();
        return address(defaultAcl) != address(0) && // Poor man's initialization check (saves gas)
            defaultAcl.hasPermission(_who, _where, _what, _how);
    }

    function _setApp(bytes32 _namespace, bytes32 _appId, address _app) internal {
        require(isContract(_app), ERROR_APP_NOT_CONTRACT);
        apps[_namespace][_appId] = _app;
        emit SetApp(_namespace, _appId, _app);
    }

    function _setAppIfNew(bytes32 _namespace, bytes32 _appId, address _app) internal {
        address app = getApp(_namespace, _appId);
        if (app != address(0)) {
            // The only way to set an app is if it passes the isContract check, so no need to check it again
            require(app == _app, ERROR_INVALID_APP_CHANGE);
        } else {
            _setApp(_namespace, _appId, _app);
        }
    }

    modifier auth(bytes32 _role, uint256[] memory _params) {
        require(
            hasPermission(msg.sender, address(this), _role, ConversionHelpers.dangerouslyCastUintArrayToBytes(_params)),
            ERROR_AUTH_FAILED
        );
        _;
    }
}

/*
 * SPDX-License-Identifier:    MIT
 */
pragma solidity ^0.4.24;
contract ACLSyntaxSugar {
    function arr() internal pure returns (uint256[]) {
        return new uint256[](0);
    }
    function arr(bytes32 _a) internal pure returns (uint256[] r) {
        return arr(uint256(_a));
    }
    function arr(bytes32 _a, bytes32 _b) internal pure returns (uint256[] r) {
        return arr(uint256(_a), uint256(_b));
    }
    function arr(address _a) internal pure returns (uint256[] r) {
        return arr(uint256(_a));
    }
    function arr(address _a, address _b) internal pure returns (uint256[] r) {
        return arr(uint256(_a), uint256(_b));
    }
    function arr(address _a, uint256 _b, uint256 _c) internal pure returns (uint256[] r) {
        return arr(uint256(_a), _b, _c);
    }
    function arr(address _a, uint256 _b, uint256 _c, uint256 _d) internal pure returns (uint256[] r) {
        return arr(uint256(_a), _b, _c, _d);
    }
    function arr(address _a, uint256 _b) internal pure returns (uint256[] r) {
        return arr(uint256(_a), uint256(_b));
    }
    function arr(address _a, address _b, uint256 _c, uint256 _d, uint256 _e) internal pure returns (uint256[] r) {
        return arr(uint256(_a), uint256(_b), _c, _d, _e);
    }
    function arr(address _a, address _b, address _c) internal pure returns (uint256[] r) {
        return arr(uint256(_a), uint256(_b), uint256(_c));
    }
    function arr(address _a, address _b, uint256 _c) internal pure returns (uint256[] r) {
        return arr(uint256(_a), uint256(_b), uint256(_c));
    }
    function arr(uint256 _a) internal pure returns (uint256[] r) {
        r = new uint256[](1);
        r[0] = _a;
    }
    function arr(uint256 _a, uint256 _b) internal pure returns (uint256[] r) {
        r = new uint256[](2);
        r[0] = _a;
        r[1] = _b;
    }
    function arr(uint256 _a, uint256 _b, uint256 _c) internal pure returns (uint256[] r) {
        r = new uint256[](3);
        r[0] = _a;
        r[1] = _b;
        r[2] = _c;
    }
    function arr(uint256 _a, uint256 _b, uint256 _c, uint256 _d) internal pure returns (uint256[] r) {
        r = new uint256[](4);
        r[0] = _a;
        r[1] = _b;
        r[2] = _c;
        r[3] = _d;
    }
    function arr(uint256 _a, uint256 _b, uint256 _c, uint256 _d, uint256 _e) internal pure returns (uint256[] r) {
        r = new uint256[](5);
        r[0] = _a;
        r[1] = _b;
        r[2] = _c;
        r[3] = _d;
        r[4] = _e;
    }
}
contract ACLHelpers {
    function decodeParamOp(uint256 _x) internal pure returns (uint8 b) {
        return uint8(_x >> (8 * 30));
    }
    function decodeParamId(uint256 _x) internal pure returns (uint8 b) {
        return uint8(_x >> (8 * 31));
    }
    function decodeParamsList(uint256 _x) internal pure returns (uint32 a, uint32 b, uint32 c) {
        a = uint32(_x);
        b = uint32(_x >> (8 * 4));
        c = uint32(_x >> (8 * 8));
    }
}
/*
 * SPDX-License-Identifier:    MIT
 */
pragma solidity ^0.4.24;
interface IACL {
    function initialize(address permissionsCreator) external;
    // TODO: this should be external
    // See https://github.com/ethereum/solidity/issues/4832
    function hasPermission(address who, address where, bytes32 what, bytes how) public view returns (bool);
}
/*
 * SPDX-License-Identifier:    MIT
 */
pragma solidity ^0.4.24;
import "../common/UnstructuredStorage.sol";
import "../kernel/IKernel.sol";
contract AppStorage {
    using UnstructuredStorage for bytes32;
    /* Hardcoded constants to save gas
    bytes32 internal constant KERNEL_POSITION = keccak256("aragonOS.appStorage.kernel");
    bytes32 internal constant APP_ID_POSITION = keccak256("aragonOS.appStorage.appId");
    */
    bytes32 internal constant KERNEL_POSITION = 0x4172f0f7d2289153072b0a6ca36959e0cbe2efc3afe50fc81636caa96338137b;
    bytes32 internal constant APP_ID_POSITION = 0xd625496217aa6a3453eecb9c3489dc5a53e6c67b444329ea2b2cbc9ff547639b;
    function kernel() public view returns (IKernel) {
        return IKernel(KERNEL_POSITION.getStorageAddress());
    }
    function appId() public view returns (bytes32) {
        return APP_ID_POSITION.getStorageBytes32();
    }
    function setKernel(IKernel _kernel) internal {
        KERNEL_POSITION.setStorageAddress(address(_kernel));
    }
    function setAppId(bytes32 _appId) internal {
        APP_ID_POSITION.setStorageBytes32(_appId);
    }
}
/*
 * SPDX-License-Identifier:    MIT
 */
pragma solidity ^0.4.24;
import "./AppStorage.sol";
import "../acl/ACLSyntaxSugar.sol";
import "../common/Autopetrified.sol";
import "../common/ConversionHelpers.sol";
import "../common/ReentrancyGuard.sol";
import "../common/VaultRecoverable.sol";
import "../evmscript/EVMScriptRunner.sol";
// Contracts inheriting from AragonApp are, by default, immediately petrified upon deployment so
// that they can never be initialized.
// Unless overriden, this behaviour enforces those contracts to be usable only behind an AppProxy.
// ReentrancyGuard, EVMScriptRunner, and ACLSyntaxSugar are not directly used by this contract, but
// are included so that they are automatically usable by subclassing contracts
contract AragonApp is AppStorage, Autopetrified, VaultRecoverable, ReentrancyGuard, EVMScriptRunner, ACLSyntaxSugar {
    string private constant ERROR_AUTH_FAILED = "APP_AUTH_FAILED";
    modifier auth(bytes32 _role) {
        require(canPerform(msg.sender, _role, new uint256[](0)), ERROR_AUTH_FAILED);
        _;
    }
    modifier authP(bytes32 _role, uint256[] _params) {
        require(canPerform(msg.sender, _role, _params), ERROR_AUTH_FAILED);
        _;
    }
    /**
    * @dev Check whether an action can be performed by a sender for a particular role on this app
    * @param _sender Sender of the call
    * @param _role Role on this app
    * @param _params Permission params for the role
    * @return Boolean indicating whether the sender has the permissions to perform the action.
    *         Always returns false if the app hasn't been initialized yet.
    */
    function canPerform(address _sender, bytes32 _role, uint256[] _params) public view returns (bool) {
        if (!hasInitialized()) {
            return false;
        }
        IKernel linkedKernel = kernel();
        if (address(linkedKernel) == address(0)) {
            return false;
        }
        return linkedKernel.hasPermission(
            _sender,
            address(this),
            _role,
            ConversionHelpers.dangerouslyCastUintArrayToBytes(_params)
        );
    }
    /**
    * @dev Get the recovery vault for the app
    * @return Recovery vault address for the app
    */
    function getRecoveryVault() public view returns (address) {
        // Funds recovery via a vault is only available when used with a kernel
        return kernel().getRecoveryVault(); // if kernel is not set, it will revert
    }
}
/*
 * SPDX-License-Identifier:    MIT
 */
pragma solidity ^0.4.24;
import "./Petrifiable.sol";
contract Autopetrified is Petrifiable {
    constructor() public {
        // Immediately petrify base (non-proxy) instances of inherited contracts on deploy.
        // This renders them uninitializable (and unusable without a proxy).
        petrify();
    }
}
pragma solidity ^0.4.24;
library ConversionHelpers {
    string private constant ERROR_IMPROPER_LENGTH = "CONVERSION_IMPROPER_LENGTH";
    function dangerouslyCastUintArrayToBytes(uint256[] memory _input) internal pure returns (bytes memory output) {
        // Force cast the uint256[] into a bytes array, by overwriting its length
        // Note that the bytes array doesn't need to be initialized as we immediately overwrite it
        // with the input and a new length. The input becomes invalid from this point forward.
        uint256 byteLength = _input.length * 32;
        assembly {
            output := _input
            mstore(output, byteLength)
        }
    }
    function dangerouslyCastBytesToUintArray(bytes memory _input) internal pure returns (uint256[] memory output) {
        // Force cast the bytes array into a uint256[], by overwriting its length
        // Note that the uint256[] doesn't need to be initialized as we immediately overwrite it
        // with the input and a new length. The input becomes invalid from this point forward.
        uint256 intsLength = _input.length / 32;
        require(_input.length == intsLength * 32, ERROR_IMPROPER_LENGTH);
        assembly {
            output := _input
            mstore(output, intsLength)
        }
    }
}
/*
 * SPDX-License-Identifier:    MIT
 */
pragma solidity ^0.4.24;
// aragonOS and aragon-apps rely on address(0) to denote native ETH, in
// contracts where both tokens and ETH are accepted
contract EtherTokenConstant {
    address internal constant ETH = address(0);
}
/*
 * SPDX-License-Identifier:    MIT
 */
pragma solidity ^0.4.24;
import "./TimeHelpers.sol";
import "./UnstructuredStorage.sol";
contract Initializable is TimeHelpers {
    using UnstructuredStorage for bytes32;
    // keccak256("aragonOS.initializable.initializationBlock")
    bytes32 internal constant INITIALIZATION_BLOCK_POSITION = 0xebb05b386a8d34882b8711d156f463690983dc47815980fb82aeeff1aa43579e;
    string private constant ERROR_ALREADY_INITIALIZED = "INIT_ALREADY_INITIALIZED";
    string private constant ERROR_NOT_INITIALIZED = "INIT_NOT_INITIALIZED";
    modifier onlyInit {
        require(getInitializationBlock() == 0, ERROR_ALREADY_INITIALIZED);
        _;
    }
    modifier isInitialized {
        require(hasInitialized(), ERROR_NOT_INITIALIZED);
        _;
    }
    /**
    * @return Block number in which the contract was initialized
    */
    function getInitializationBlock() public view returns (uint256) {
        return INITIALIZATION_BLOCK_POSITION.getStorageUint256();
    }
    /**
    * @return Whether the contract has been initialized by the time of the current block
    */
    function hasInitialized() public view returns (bool) {
        uint256 initializationBlock = getInitializationBlock();
        return initializationBlock != 0 && getBlockNumber() >= initializationBlock;
    }
    /**
    * @dev Function to be called by top level contract after initialization has finished.
    */
    function initialized() internal onlyInit {
        INITIALIZATION_BLOCK_POSITION.setStorageUint256(getBlockNumber());
    }
    /**
    * @dev Function to be called by top level contract after initialization to enable the contract
    *      at a future block number rather than immediately.
    */
    function initializedAt(uint256 _blockNumber) internal onlyInit {
        INITIALIZATION_BLOCK_POSITION.setStorageUint256(_blockNumber);
    }
}
/*
 * SPDX-License-Identifier:    MIT
 */
pragma solidity ^0.4.24;
contract IsContract {
    /*
    * NOTE: this should NEVER be used for authentication
    * (see pitfalls: https://github.com/fergarrui/ethereum-security/tree/master/contracts/extcodesize).
    *
    * This is only intended to be used as a sanity check that an address is actually a contract,
    * RATHER THAN an address not being a contract.
    */
    function isContract(address _target) internal view returns (bool) {
        if (_target == address(0)) {
            return false;
        }
        uint256 size;
        assembly { size := extcodesize(_target) }
        return size > 0;
    }
}
/*
 * SPDX-License-Identifier:    MIT
 */
pragma solidity ^0.4.24;
interface IVaultRecoverable {
    event RecoverToVault(address indexed vault, address indexed token, uint256 amount);
    function transferToVault(address token) external;
    function allowRecoverability(address token) external view returns (bool);
    function getRecoveryVault() external view returns (address);
}
/*
 * SPDX-License-Identifier:    MIT
 */
pragma solidity ^0.4.24;
import "./Initializable.sol";
contract Petrifiable is Initializable {
    // Use block UINT256_MAX (which should be never) as the initializable date
    uint256 internal constant PETRIFIED_BLOCK = uint256(-1);
    function isPetrified() public view returns (bool) {
        return getInitializationBlock() == PETRIFIED_BLOCK;
    }
    /**
    * @dev Function to be called by top level contract to prevent being initialized.
    *      Useful for freezing base contracts when they're used behind proxies.
    */
    function petrify() internal onlyInit {
        initializedAt(PETRIFIED_BLOCK);
    }
}
/*
 * SPDX-License-Identifier:    MIT
 */
pragma solidity ^0.4.24;
import "../common/UnstructuredStorage.sol";
contract ReentrancyGuard {
    using UnstructuredStorage for bytes32;
    /* Hardcoded constants to save gas
    bytes32 internal constant REENTRANCY_MUTEX_POSITION = keccak256("aragonOS.reentrancyGuard.mutex");
    */
    bytes32 private constant REENTRANCY_MUTEX_POSITION = 0xe855346402235fdd185c890e68d2c4ecad599b88587635ee285bce2fda58dacb;
    string private constant ERROR_REENTRANT = "REENTRANCY_REENTRANT_CALL";
    modifier nonReentrant() {
        // Ensure mutex is unlocked
        require(!REENTRANCY_MUTEX_POSITION.getStorageBool(), ERROR_REENTRANT);
        // Lock mutex before function call
        REENTRANCY_MUTEX_POSITION.setStorageBool(true);
        // Perform function call
        _;
        // Unlock mutex after function call
        REENTRANCY_MUTEX_POSITION.setStorageBool(false);
    }
}
// Inspired by AdEx (https://github.com/AdExNetwork/adex-protocol-eth/blob/b9df617829661a7518ee10f4cb6c4108659dd6d5/contracts/libs/SafeERC20.sol)
// and 0x (https://github.com/0xProject/0x-monorepo/blob/737d1dc54d72872e24abce5a1dbe1b66d35fa21a/contracts/protocol/contracts/protocol/AssetProxy/ERC20Proxy.sol#L143)
pragma solidity ^0.4.24;
import "../lib/token/ERC20.sol";
library SafeERC20 {
    // Before 0.5, solidity has a mismatch between `address.transfer()` and `token.transfer()`:
    // https://github.com/ethereum/solidity/issues/3544
    bytes4 private constant TRANSFER_SELECTOR = 0xa9059cbb;
    string private constant ERROR_TOKEN_BALANCE_REVERTED = "SAFE_ERC_20_BALANCE_REVERTED";
    string private constant ERROR_TOKEN_ALLOWANCE_REVERTED = "SAFE_ERC_20_ALLOWANCE_REVERTED";
    function invokeAndCheckSuccess(address _addr, bytes memory _calldata)
        private
        returns (bool)
    {
        bool ret;
        assembly {
            let ptr := mload(0x40)    // free memory pointer
            let success := call(
                gas,                  // forward all gas
                _addr,                // address
                0,                    // no value
                add(_calldata, 0x20), // calldata start
                mload(_calldata),     // calldata length
                ptr,                  // write output over free memory
                0x20                  // uint256 return
            )
            if gt(success, 0) {
                // Check number of bytes returned from last function call
                switch returndatasize
                // No bytes returned: assume success
                case 0 {
                    ret := 1
                }
                // 32 bytes returned: check if non-zero
                case 0x20 {
                    // Only return success if returned data was true
                    // Already have output in ptr
                    ret := eq(mload(ptr), 1)
                }
                // Not sure what was returned: don't mark as success
                default { }
            }
        }
        return ret;
    }
    function staticInvoke(address _addr, bytes memory _calldata)
        private
        view
        returns (bool, uint256)
    {
        bool success;
        uint256 ret;
        assembly {
            let ptr := mload(0x40)    // free memory pointer
            success := staticcall(
                gas,                  // forward all gas
                _addr,                // address
                add(_calldata, 0x20), // calldata start
                mload(_calldata),     // calldata length
                ptr,                  // write output over free memory
                0x20                  // uint256 return
            )
            if gt(success, 0) {
                ret := mload(ptr)
            }
        }
        return (success, ret);
    }
    /**
    * @dev Same as a standards-compliant ERC20.transfer() that never reverts (returns false).
    *      Note that this makes an external call to the token.
    */
    function safeTransfer(ERC20 _token, address _to, uint256 _amount) internal returns (bool) {
        bytes memory transferCallData = abi.encodeWithSelector(
            TRANSFER_SELECTOR,
            _to,
            _amount
        );
        return invokeAndCheckSuccess(_token, transferCallData);
    }
    /**
    * @dev Same as a standards-compliant ERC20.transferFrom() that never reverts (returns false).
    *      Note that this makes an external call to the token.
    */
    function safeTransferFrom(ERC20 _token, address _from, address _to, uint256 _amount) internal returns (bool) {
        bytes memory transferFromCallData = abi.encodeWithSelector(
            _token.transferFrom.selector,
            _from,
            _to,
            _amount
        );
        return invokeAndCheckSuccess(_token, transferFromCallData);
    }
    /**
    * @dev Same as a standards-compliant ERC20.approve() that never reverts (returns false).
    *      Note that this makes an external call to the token.
    */
    function safeApprove(ERC20 _token, address _spender, uint256 _amount) internal returns (bool) {
        bytes memory approveCallData = abi.encodeWithSelector(
            _token.approve.selector,
            _spender,
            _amount
        );
        return invokeAndCheckSuccess(_token, approveCallData);
    }
    /**
    * @dev Static call into ERC20.balanceOf().
    * Reverts if the call fails for some reason (should never fail).
    */
    function staticBalanceOf(ERC20 _token, address _owner) internal view returns (uint256) {
        bytes memory balanceOfCallData = abi.encodeWithSelector(
            _token.balanceOf.selector,
            _owner
        );
        (bool success, uint256 tokenBalance) = staticInvoke(_token, balanceOfCallData);
        require(success, ERROR_TOKEN_BALANCE_REVERTED);
        return tokenBalance;
    }
    /**
    * @dev Static call into ERC20.allowance().
    * Reverts if the call fails for some reason (should never fail).
    */
    function staticAllowance(ERC20 _token, address _owner, address _spender) internal view returns (uint256) {
        bytes memory allowanceCallData = abi.encodeWithSelector(
            _token.allowance.selector,
            _owner,
            _spender
        );
        (bool success, uint256 allowance) = staticInvoke(_token, allowanceCallData);
        require(success, ERROR_TOKEN_ALLOWANCE_REVERTED);
        return allowance;
    }
    /**
    * @dev Static call into ERC20.totalSupply().
    * Reverts if the call fails for some reason (should never fail).
    */
    function staticTotalSupply(ERC20 _token) internal view returns (uint256) {
        bytes memory totalSupplyCallData = abi.encodeWithSelector(_token.totalSupply.selector);
        (bool success, uint256 totalSupply) = staticInvoke(_token, totalSupplyCallData);
        require(success, ERROR_TOKEN_ALLOWANCE_REVERTED);
        return totalSupply;
    }
}
/*
 * SPDX-License-Identifier:    MIT
 */
pragma solidity ^0.4.24;
import "./Uint256Helpers.sol";
contract TimeHelpers {
    using Uint256Helpers for uint256;
    /**
    * @dev Returns the current block number.
    *      Using a function rather than `block.number` allows us to easily mock the block number in
    *      tests.
    */
    function getBlockNumber() internal view returns (uint256) {
        return block.number;
    }
    /**
    * @dev Returns the current block number, converted to uint64.
    *      Using a function rather than `block.number` allows us to easily mock the block number in
    *      tests.
    */
    function getBlockNumber64() internal view returns (uint64) {
        return getBlockNumber().toUint64();
    }
    /**
    * @dev Returns the current timestamp.
    *      Using a function rather than `block.timestamp` allows us to easily mock it in
    *      tests.
    */
    function getTimestamp() internal view returns (uint256) {
        return block.timestamp; // solium-disable-line security/no-block-members
    }
    /**
    * @dev Returns the current timestamp, converted to uint64.
    *      Using a function rather than `block.timestamp` allows us to easily mock it in
    *      tests.
    */
    function getTimestamp64() internal view returns (uint64) {
        return getTimestamp().toUint64();
    }
}
pragma solidity ^0.4.24;
library Uint256Helpers {
    uint256 private constant MAX_UINT64 = uint64(-1);
    string private constant ERROR_NUMBER_TOO_BIG = "UINT64_NUMBER_TOO_BIG";
    function toUint64(uint256 a) internal pure returns (uint64) {
        require(a <= MAX_UINT64, ERROR_NUMBER_TOO_BIG);
        return uint64(a);
    }
}
/*
 * SPDX-License-Identifier:    MIT
 */
pragma solidity ^0.4.24;
library UnstructuredStorage {
    function getStorageBool(bytes32 position) internal view returns (bool data) {
        assembly { data := sload(position) }
    }
    function getStorageAddress(bytes32 position) internal view returns (address data) {
        assembly { data := sload(position) }
    }
    function getStorageBytes32(bytes32 position) internal view returns (bytes32 data) {
        assembly { data := sload(position) }
    }
    function getStorageUint256(bytes32 position) internal view returns (uint256 data) {
        assembly { data := sload(position) }
    }
    function setStorageBool(bytes32 position, bool data) internal {
        assembly { sstore(position, data) }
    }
    function setStorageAddress(bytes32 position, address data) internal {
        assembly { sstore(position, data) }
    }
    function setStorageBytes32(bytes32 position, bytes32 data) internal {
        assembly { sstore(position, data) }
    }
    function setStorageUint256(bytes32 position, uint256 data) internal {
        assembly { sstore(position, data) }
    }
}
/*
 * SPDX-License-Identifier:    MIT
 */
pragma solidity ^0.4.24;
import "../lib/token/ERC20.sol";
import "./EtherTokenConstant.sol";
import "./IsContract.sol";
import "./IVaultRecoverable.sol";
import "./SafeERC20.sol";
contract VaultRecoverable is IVaultRecoverable, EtherTokenConstant, IsContract {
    using SafeERC20 for ERC20;
    string private constant ERROR_DISALLOWED = "RECOVER_DISALLOWED";
    string private constant ERROR_VAULT_NOT_CONTRACT = "RECOVER_VAULT_NOT_CONTRACT";
    string private constant ERROR_TOKEN_TRANSFER_FAILED = "RECOVER_TOKEN_TRANSFER_FAILED";
    /**
     * @notice Send funds to recovery Vault. This contract should never receive funds,
     *         but in case it does, this function allows one to recover them.
     * @param _token Token balance to be sent to recovery vault.
     */
    function transferToVault(address _token) external {
        require(allowRecoverability(_token), ERROR_DISALLOWED);
        address vault = getRecoveryVault();
        require(isContract(vault), ERROR_VAULT_NOT_CONTRACT);
        uint256 balance;
        if (_token == ETH) {
            balance = address(this).balance;
            vault.transfer(balance);
        } else {
            ERC20 token = ERC20(_token);
            balance = token.staticBalanceOf(this);
            require(token.safeTransfer(vault, balance), ERROR_TOKEN_TRANSFER_FAILED);
        }
        emit RecoverToVault(vault, _token, balance);
    }
    /**
    * @dev By default deriving from AragonApp makes it recoverable
    * @param token Token address that would be recovered
    * @return bool whether the app allows the recovery
    */
    function allowRecoverability(address token) public view returns (bool) {
        return true;
    }
    // Cast non-implemented interface to be public so we can use it internally
    function getRecoveryVault() public view returns (address);
}
/*
 * SPDX-License-Identifier:    MIT
 */
pragma solidity ^0.4.24;
import "./IEVMScriptExecutor.sol";
import "./IEVMScriptRegistry.sol";
import "../apps/AppStorage.sol";
import "../kernel/KernelConstants.sol";
import "../common/Initializable.sol";
contract EVMScriptRunner is AppStorage, Initializable, EVMScriptRegistryConstants, KernelNamespaceConstants {
    string private constant ERROR_EXECUTOR_UNAVAILABLE = "EVMRUN_EXECUTOR_UNAVAILABLE";
    string private constant ERROR_PROTECTED_STATE_MODIFIED = "EVMRUN_PROTECTED_STATE_MODIFIED";
    /* This is manually crafted in assembly
    string private constant ERROR_EXECUTOR_INVALID_RETURN = "EVMRUN_EXECUTOR_INVALID_RETURN";
    */
    event ScriptResult(address indexed executor, bytes script, bytes input, bytes returnData);
    function getEVMScriptExecutor(bytes _script) public view returns (IEVMScriptExecutor) {
        return IEVMScriptExecutor(getEVMScriptRegistry().getScriptExecutor(_script));
    }
    function getEVMScriptRegistry() public view returns (IEVMScriptRegistry) {
        address registryAddr = kernel().getApp(KERNEL_APP_ADDR_NAMESPACE, EVMSCRIPT_REGISTRY_APP_ID);
        return IEVMScriptRegistry(registryAddr);
    }
    function runScript(bytes _script, bytes _input, address[] _blacklist)
        internal
        isInitialized
        protectState
        returns (bytes)
    {
        IEVMScriptExecutor executor = getEVMScriptExecutor(_script);
        require(address(executor) != address(0), ERROR_EXECUTOR_UNAVAILABLE);
        bytes4 sig = executor.execScript.selector;
        bytes memory data = abi.encodeWithSelector(sig, _script, _input, _blacklist);
        bytes memory output;
        assembly {
            let success := delegatecall(
                gas,                // forward all gas
                executor,           // address
                add(data, 0x20),    // calldata start
                mload(data),        // calldata length
                0,                  // don't write output (we'll handle this ourselves)
                0                   // don't write output
            )
            output := mload(0x40) // free mem ptr get
            switch success
            case 0 {
                // If the call errored, forward its full error data
                returndatacopy(output, 0, returndatasize)
                revert(output, returndatasize)
            }
            default {
                switch gt(returndatasize, 0x3f)
                case 0 {
                    // Need at least 0x40 bytes returned for properly ABI-encoded bytes values,
                    // revert with "EVMRUN_EXECUTOR_INVALID_RETURN"
                    // See remix: doing a `revert("EVMRUN_EXECUTOR_INVALID_RETURN")` always results in
                    // this memory layout
                    mstore(output, 0x08c379a000000000000000000000000000000000000000000000000000000000)         // error identifier
                    mstore(add(output, 0x04), 0x0000000000000000000000000000000000000000000000000000000000000020) // starting offset
                    mstore(add(output, 0x24), 0x000000000000000000000000000000000000000000000000000000000000001e) // reason length
                    mstore(add(output, 0x44), 0x45564d52554e5f4558454355544f525f494e56414c49445f52455455524e0000) // reason
                    revert(output, 100) // 100 = 4 + 3 * 32 (error identifier + 3 words for the ABI encoded error)
                }
                default {
                    // Copy result
                    //
                    // Needs to perform an ABI decode for the expected `bytes` return type of
                    // `executor.execScript()` as solidity will automatically ABI encode the returned bytes as:
                    //    [ position of the first dynamic length return value = 0x20 (32 bytes) ]
                    //    [ output length (32 bytes) ]
                    //    [ output content (N bytes) ]
                    //
                    // Perform the ABI decode by ignoring the first 32 bytes of the return data
                    let copysize := sub(returndatasize, 0x20)
                    returndatacopy(output, 0x20, copysize)
                    mstore(0x40, add(output, copysize)) // free mem ptr set
                }
            }
        }
        emit ScriptResult(address(executor), _script, _input, output);
        return output;
    }
    modifier protectState {
        address preKernel = address(kernel());
        bytes32 preAppId = appId();
        _; // exec
        require(address(kernel()) == preKernel, ERROR_PROTECTED_STATE_MODIFIED);
        require(appId() == preAppId, ERROR_PROTECTED_STATE_MODIFIED);
    }
}
/*
 * SPDX-License-Identifier:    MIT
 */
pragma solidity ^0.4.24;
interface IEVMScriptExecutor {
    function execScript(bytes script, bytes input, address[] blacklist) external returns (bytes);
    function executorType() external pure returns (bytes32);
}
/*
 * SPDX-License-Identifier:    MIT
 */
pragma solidity ^0.4.24;
import "./IEVMScriptExecutor.sol";
contract EVMScriptRegistryConstants {
    /* Hardcoded constants to save gas
    bytes32 internal constant EVMSCRIPT_REGISTRY_APP_ID = apmNamehash("evmreg");
    */
    bytes32 internal constant EVMSCRIPT_REGISTRY_APP_ID = 0xddbcfd564f642ab5627cf68b9b7d374fb4f8a36e941a75d89c87998cef03bd61;
}
interface IEVMScriptRegistry {
    function addScriptExecutor(IEVMScriptExecutor executor) external returns (uint id);
    function disableScriptExecutor(uint256 executorId) external;
    // TODO: this should be external
    // See https://github.com/ethereum/solidity/issues/4832
    function getScriptExecutor(bytes script) public view returns (IEVMScriptExecutor);
}
/*
 * SPDX-License-Identifier:    MIT
 */
pragma solidity ^0.4.24;
import "../acl/IACL.sol";
import "../common/IVaultRecoverable.sol";
interface IKernelEvents {
    event SetApp(bytes32 indexed namespace, bytes32 indexed appId, address app);
}
// This should be an interface, but interfaces can't inherit yet :(
contract IKernel is IKernelEvents, IVaultRecoverable {
    function acl() public view returns (IACL);
    function hasPermission(address who, address where, bytes32 what, bytes how) public view returns (bool);
    function setApp(bytes32 namespace, bytes32 appId, address app) public;
    function getApp(bytes32 namespace, bytes32 appId) public view returns (address);
}
/*
 * SPDX-License-Identifier:    MIT
 */
pragma solidity ^0.4.24;
contract KernelAppIds {
    /* Hardcoded constants to save gas
    bytes32 internal constant KERNEL_CORE_APP_ID = apmNamehash("kernel");
    bytes32 internal constant KERNEL_DEFAULT_ACL_APP_ID = apmNamehash("acl");
    bytes32 internal constant KERNEL_DEFAULT_VAULT_APP_ID = apmNamehash("vault");
    */
    bytes32 internal constant KERNEL_CORE_APP_ID = 0x3b4bf6bf3ad5000ecf0f989d5befde585c6860fea3e574a4fab4c49d1c177d9c;
    bytes32 internal constant KERNEL_DEFAULT_ACL_APP_ID = 0xe3262375f45a6e2026b7e7b18c2b807434f2508fe1a2a3dfb493c7df8f4aad6a;
    bytes32 internal constant KERNEL_DEFAULT_VAULT_APP_ID = 0x7e852e0fcfce6551c13800f1e7476f982525c2b5277ba14b24339c68416336d1;
}
contract KernelNamespaceConstants {
    /* Hardcoded constants to save gas
    bytes32 internal constant KERNEL_CORE_NAMESPACE = keccak256("core");
    bytes32 internal constant KERNEL_APP_BASES_NAMESPACE = keccak256("base");
    bytes32 internal constant KERNEL_APP_ADDR_NAMESPACE = keccak256("app");
    */
    bytes32 internal constant KERNEL_CORE_NAMESPACE = 0xc681a85306374a5ab27f0bbc385296a54bcd314a1948b6cf61c4ea1bc44bb9f8;
    bytes32 internal constant KERNEL_APP_BASES_NAMESPACE = 0xf1f3eb40f5bc1ad1344716ced8b8a0431d840b5783aea1fd01786bc26f35ac0f;
    bytes32 internal constant KERNEL_APP_ADDR_NAMESPACE = 0xd6f028ca0e8edb4a8c9757ca4fdccab25fa1e0317da1188108f7d2dee14902fb;
}
// See https://github.com/OpenZeppelin/openzeppelin-solidity/blob/d51e38758e1d985661534534d5c61e27bece5042/contracts/math/SafeMath.sol
// Adapted to use pragma ^0.4.24 and satisfy our linter rules
pragma solidity ^0.4.24;
/**
 * @title SafeMath
 * @dev Math operations with safety checks that revert on error
 */
library SafeMath {
    string private constant ERROR_ADD_OVERFLOW = "MATH_ADD_OVERFLOW";
    string private constant ERROR_SUB_UNDERFLOW = "MATH_SUB_UNDERFLOW";
    string private constant ERROR_MUL_OVERFLOW = "MATH_MUL_OVERFLOW";
    string private constant ERROR_DIV_ZERO = "MATH_DIV_ZERO";
    /**
    * @dev Multiplies two numbers, reverts on overflow.
    */
    function mul(uint256 _a, uint256 _b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-solidity/pull/522
        if (_a == 0) {
            return 0;
        }
        uint256 c = _a * _b;
        require(c / _a == _b, ERROR_MUL_OVERFLOW);
        return c;
    }
    /**
    * @dev Integer division of two numbers truncating the quotient, reverts on division by zero.
    */
    function div(uint256 _a, uint256 _b) internal pure returns (uint256) {
        require(_b > 0, ERROR_DIV_ZERO); // Solidity only automatically asserts when dividing by 0
        uint256 c = _a / _b;
        // assert(_a == _b * c + _a % _b); // There is no case in which this doesn't hold
        return c;
    }
    /**
    * @dev Subtracts two numbers, reverts on overflow (i.e. if subtrahend is greater than minuend).
    */
    function sub(uint256 _a, uint256 _b) internal pure returns (uint256) {
        require(_b <= _a, ERROR_SUB_UNDERFLOW);
        uint256 c = _a - _b;
        return c;
    }
    /**
    * @dev Adds two numbers, reverts on overflow.
    */
    function add(uint256 _a, uint256 _b) internal pure returns (uint256) {
        uint256 c = _a + _b;
        require(c >= _a, ERROR_ADD_OVERFLOW);
        return c;
    }
    /**
    * @dev Divides two numbers and returns the remainder (unsigned integer modulo),
    * reverts when dividing by zero.
    */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b != 0, ERROR_DIV_ZERO);
        return a % b;
    }
}
// See https://github.com/OpenZeppelin/openzeppelin-solidity/blob/a9f910d34f0ab33a1ae5e714f69f9596a02b4d91/contracts/token/ERC20/ERC20.sol
pragma solidity ^0.4.24;
/**
 * @title ERC20 interface
 * @dev see https://github.com/ethereum/EIPs/issues/20
 */
contract ERC20 {
    function totalSupply() public view returns (uint256);
    function balanceOf(address _who) public view returns (uint256);
    function allowance(address _owner, address _spender)
        public view returns (uint256);
    function transfer(address _to, uint256 _value) public returns (bool);
    function approve(address _spender, uint256 _value)
        public returns (bool);
    function transferFrom(address _from, address _to, uint256 _value)
        public returns (bool);
    event Transfer(
        address indexed from,
        address indexed to,
        uint256 value
    );
    event Approval(
        address indexed owner,
        address indexed spender,
        uint256 value
    );
}
// SPDX-FileCopyrightText: 2023 Lido <info@lido.fi>
// SPDX-License-Identifier: GPL-3.0
/* See contracts/COMPILERS.md */
pragma solidity 0.4.24;
import "@aragon/os/contracts/common/UnstructuredStorage.sol";
//
// We need to pack four variables into the same 256bit-wide storage slot
// to lower the costs per each staking request.
//
// As a result, slot's memory aligned as follows:
//
// MSB ------------------------------------------------------------------------------> LSB
// 256____________160_________________________128_______________32_____________________ 0
// |_______________|___________________________|________________|_______________________|
// | maxStakeLimit | maxStakeLimitGrowthBlocks | prevStakeLimit | prevStakeBlockNumber  |
// |<-- 96 bits -->|<---------- 32 bits ------>|<-- 96 bits --->|<----- 32 bits ------->|
//
//
// NB: Internal representation conventions:
//
// - the `maxStakeLimitGrowthBlocks` field above represented as follows:
// `maxStakeLimitGrowthBlocks` = `maxStakeLimit` / `stakeLimitIncreasePerBlock`
//           32 bits                 96 bits               96 bits
//
//
// - the "staking paused" state is encoded by `prevStakeBlockNumber` being zero,
// - the "staking unlimited" state is encoded by `maxStakeLimit` being zero and `prevStakeBlockNumber` being non-zero.
//
/**
* @notice Library for the internal structs definitions
* @dev solidity <0.6 doesn't support top-level structs
* using the library to have a proper namespace
*/
library StakeLimitState {
    /**
      * @dev Internal representation struct (slot-wide)
      */
    struct Data {
        uint32 prevStakeBlockNumber;      // block number of the previous stake submit
        uint96 prevStakeLimit;            // limit value (<= `maxStakeLimit`) obtained on the previous stake submit
        uint32 maxStakeLimitGrowthBlocks; // limit regeneration speed expressed in blocks
        uint96 maxStakeLimit;             // maximum limit value
    }
}
library StakeLimitUnstructuredStorage {
    using UnstructuredStorage for bytes32;
    /// @dev Storage offset for `maxStakeLimit` (bits)
    uint256 internal constant MAX_STAKE_LIMIT_OFFSET = 160;
    /// @dev Storage offset for `maxStakeLimitGrowthBlocks` (bits)
    uint256 internal constant MAX_STAKE_LIMIT_GROWTH_BLOCKS_OFFSET = 128;
    /// @dev Storage offset for `prevStakeLimit` (bits)
    uint256 internal constant PREV_STAKE_LIMIT_OFFSET = 32;
    /// @dev Storage offset for `prevStakeBlockNumber` (bits)
    uint256 internal constant PREV_STAKE_BLOCK_NUMBER_OFFSET = 0;
    /**
    * @dev Read stake limit state from the unstructured storage position
    * @param _position storage offset
    */
    function getStorageStakeLimitStruct(bytes32 _position) internal view returns (StakeLimitState.Data memory stakeLimit) {
        uint256 slotValue = _position.getStorageUint256();
        stakeLimit.prevStakeBlockNumber = uint32(slotValue >> PREV_STAKE_BLOCK_NUMBER_OFFSET);
        stakeLimit.prevStakeLimit = uint96(slotValue >> PREV_STAKE_LIMIT_OFFSET);
        stakeLimit.maxStakeLimitGrowthBlocks = uint32(slotValue >> MAX_STAKE_LIMIT_GROWTH_BLOCKS_OFFSET);
        stakeLimit.maxStakeLimit = uint96(slotValue >> MAX_STAKE_LIMIT_OFFSET);
    }
     /**
    * @dev Write stake limit state to the unstructured storage position
    * @param _position storage offset
    * @param _data stake limit state structure instance
    */
    function setStorageStakeLimitStruct(bytes32 _position, StakeLimitState.Data memory _data) internal {
        _position.setStorageUint256(
            uint256(_data.prevStakeBlockNumber) << PREV_STAKE_BLOCK_NUMBER_OFFSET
                | uint256(_data.prevStakeLimit) << PREV_STAKE_LIMIT_OFFSET
                | uint256(_data.maxStakeLimitGrowthBlocks) << MAX_STAKE_LIMIT_GROWTH_BLOCKS_OFFSET
                | uint256(_data.maxStakeLimit) << MAX_STAKE_LIMIT_OFFSET
        );
    }
}
/**
* @notice Interface library with helper functions to deal with stake limit struct in a more high-level approach.
*/
library StakeLimitUtils {
    /**
    * @notice Calculate stake limit for the current block.
    * @dev using `_constGasMin` to make gas consumption independent of the current block number
    */
    function calculateCurrentStakeLimit(StakeLimitState.Data memory _data) internal view returns(uint256 limit) {
        uint256 stakeLimitIncPerBlock;
        if (_data.maxStakeLimitGrowthBlocks != 0) {
            stakeLimitIncPerBlock = _data.maxStakeLimit / _data.maxStakeLimitGrowthBlocks;
        }
        uint256 blocksPassed = block.number - _data.prevStakeBlockNumber;
        uint256 projectedLimit = _data.prevStakeLimit + blocksPassed * stakeLimitIncPerBlock;
        limit = _constGasMin(
            projectedLimit,
            _data.maxStakeLimit
        );
    }
    /**
    * @notice check if staking is on pause
    */
    function isStakingPaused(StakeLimitState.Data memory _data) internal pure returns(bool) {
        return _data.prevStakeBlockNumber == 0;
    }
    /**
    * @notice check if staking limit is set (otherwise staking is unlimited)
    */
    function isStakingLimitSet(StakeLimitState.Data memory _data) internal pure returns(bool) {
        return _data.maxStakeLimit != 0;
    }
    /**
    * @notice update stake limit repr with the desired limits
    * @dev input `_data` param is mutated and the func returns effectively the same pointer
    * @param _data stake limit state struct
    * @param _maxStakeLimit stake limit max value
    * @param _stakeLimitIncreasePerBlock stake limit increase (restoration) per block
    */
    function setStakingLimit(
        StakeLimitState.Data memory _data,
        uint256 _maxStakeLimit,
        uint256 _stakeLimitIncreasePerBlock
    ) internal view returns (StakeLimitState.Data memory) {
        require(_maxStakeLimit != 0, "ZERO_MAX_STAKE_LIMIT");
        require(_maxStakeLimit <= uint96(-1), "TOO_LARGE_MAX_STAKE_LIMIT");
        require(_maxStakeLimit >= _stakeLimitIncreasePerBlock, "TOO_LARGE_LIMIT_INCREASE");
        require(
            (_stakeLimitIncreasePerBlock == 0)
            || (_maxStakeLimit / _stakeLimitIncreasePerBlock <= uint32(-1)),
            "TOO_SMALL_LIMIT_INCREASE"
        );
        // reset prev stake limit to the new max stake limit if
        if (
            // staking was paused or
            _data.prevStakeBlockNumber == 0 ||
            // staking was unlimited or
            _data.maxStakeLimit == 0 ||
            // new maximum limit value is lower than the value obtained on the previous stake submit
            _maxStakeLimit < _data.prevStakeLimit
        ) {
            _data.prevStakeLimit = uint96(_maxStakeLimit);
        }
        _data.maxStakeLimitGrowthBlocks =
            _stakeLimitIncreasePerBlock != 0 ? uint32(_maxStakeLimit / _stakeLimitIncreasePerBlock) : 0;
        _data.maxStakeLimit = uint96(_maxStakeLimit);
        if (_data.prevStakeBlockNumber != 0) {
            _data.prevStakeBlockNumber = uint32(block.number);
        }
        return _data;
    }
    /**
    * @notice update stake limit repr to remove the limit
    * @dev input `_data` param is mutated and the func returns effectively the same pointer
    * @param _data stake limit state struct
    */
    function removeStakingLimit(
        StakeLimitState.Data memory _data
    ) internal pure returns (StakeLimitState.Data memory) {
        _data.maxStakeLimit = 0;
        return _data;
    }
    /**
    * @notice update stake limit repr after submitting user's eth
    * @dev input `_data` param is mutated and the func returns effectively the same pointer
    * @param _data stake limit state struct
    * @param _newPrevStakeLimit new value for the `prevStakeLimit` field
    */
    function updatePrevStakeLimit(
        StakeLimitState.Data memory _data,
        uint256 _newPrevStakeLimit
    ) internal view returns (StakeLimitState.Data memory) {
        assert(_newPrevStakeLimit <= uint96(-1));
        assert(_data.prevStakeBlockNumber != 0);
        _data.prevStakeLimit = uint96(_newPrevStakeLimit);
        _data.prevStakeBlockNumber = uint32(block.number);
        return _data;
    }
    /**
    * @notice set stake limit pause state (on or off)
    * @dev input `_data` param is mutated and the func returns effectively the same pointer
    * @param _data stake limit state struct
    * @param _isPaused pause state flag
    */
    function setStakeLimitPauseState(
        StakeLimitState.Data memory _data,
        bool _isPaused
    ) internal view returns (StakeLimitState.Data memory) {
        _data.prevStakeBlockNumber = uint32(_isPaused ? 0 : block.number);
        return _data;
    }
    /**
     * @notice find a minimum of two numbers with a constant gas consumption
     * @dev doesn't use branching logic inside
     * @param _lhs left hand side value
     * @param _rhs right hand side value
     */
    function _constGasMin(uint256 _lhs, uint256 _rhs) internal pure returns (uint256 min) {
        uint256 lhsIsLess;
        assembly {
            lhsIsLess := lt(_lhs, _rhs) // lhsIsLess = (_lhs < _rhs) ? 1 : 0
        }
        min = (_lhs * lhsIsLess) + (_rhs * (1 - lhsIsLess));
    }
}
// SPDX-FileCopyrightText: 2023 Lido <info@lido.fi>
// SPDX-License-Identifier: GPL-3.0
/* See contracts/COMPILERS.md */
pragma solidity 0.4.24;
import "@aragon/os/contracts/apps/AragonApp.sol";
import "@aragon/os/contracts/lib/math/SafeMath.sol";
import "../common/interfaces/ILidoLocator.sol";
import "../common/interfaces/IBurner.sol";
import "./lib/StakeLimitUtils.sol";
import "../common/lib/Math256.sol";
import "./StETHPermit.sol";
import "./utils/Versioned.sol";
interface IPostTokenRebaseReceiver {
    function handlePostTokenRebase(
        uint256 _reportTimestamp,
        uint256 _timeElapsed,
        uint256 _preTotalShares,
        uint256 _preTotalEther,
        uint256 _postTotalShares,
        uint256 _postTotalEther,
        uint256 _sharesMintedAsFees
    ) external;
}
interface IOracleReportSanityChecker {
    function checkAccountingOracleReport(
        uint256 _timeElapsed,
        uint256 _preCLBalance,
        uint256 _postCLBalance,
        uint256 _withdrawalVaultBalance,
        uint256 _elRewardsVaultBalance,
        uint256 _sharesRequestedToBurn,
        uint256 _preCLValidators,
        uint256 _postCLValidators
    ) external view;
    function smoothenTokenRebase(
        uint256 _preTotalPooledEther,
        uint256 _preTotalShares,
        uint256 _preCLBalance,
        uint256 _postCLBalance,
        uint256 _withdrawalVaultBalance,
        uint256 _elRewardsVaultBalance,
        uint256 _sharesRequestedToBurn,
        uint256 _etherToLockForWithdrawals,
        uint256 _newSharesToBurnForWithdrawals
    ) external view returns (
        uint256 withdrawals,
        uint256 elRewards,
        uint256 simulatedSharesToBurn,
        uint256 sharesToBurn
    );
    function checkWithdrawalQueueOracleReport(
        uint256 _lastFinalizableRequestId,
        uint256 _reportTimestamp
    ) external view;
    function checkSimulatedShareRate(
        uint256 _postTotalPooledEther,
        uint256 _postTotalShares,
        uint256 _etherLockedOnWithdrawalQueue,
        uint256 _sharesBurntDueToWithdrawals,
        uint256 _simulatedShareRate
    ) external view;
}
interface ILidoExecutionLayerRewardsVault {
    function withdrawRewards(uint256 _maxAmount) external returns (uint256 amount);
}
interface IWithdrawalVault {
    function withdrawWithdrawals(uint256 _amount) external;
}
interface IStakingRouter {
    function deposit(
        uint256 _depositsCount,
        uint256 _stakingModuleId,
        bytes _depositCalldata
    ) external payable;
    function getStakingRewardsDistribution()
        external
        view
        returns (
            address[] memory recipients,
            uint256[] memory stakingModuleIds,
            uint96[] memory stakingModuleFees,
            uint96 totalFee,
            uint256 precisionPoints
        );
    function getWithdrawalCredentials() external view returns (bytes32);
    function reportRewardsMinted(uint256[] _stakingModuleIds, uint256[] _totalShares) external;
    function getTotalFeeE4Precision() external view returns (uint16 totalFee);
    function getStakingFeeAggregateDistributionE4Precision() external view returns (
        uint16 modulesFee, uint16 treasuryFee
    );
    function getStakingModuleMaxDepositsCount(uint256 _stakingModuleId, uint256 _maxDepositsValue)
        external
        view
        returns (uint256);
    function TOTAL_BASIS_POINTS() external view returns (uint256);
}
interface IWithdrawalQueue {
    function prefinalize(uint256[] _batches, uint256 _maxShareRate)
        external
        view
        returns (uint256 ethToLock, uint256 sharesToBurn);
    function finalize(uint256 _lastIdToFinalize, uint256 _maxShareRate) external payable;
    function isPaused() external view returns (bool);
    function unfinalizedStETH() external view returns (uint256);
    function isBunkerModeActive() external view returns (bool);
}
/**
* @title Liquid staking pool implementation
*
* Lido is an Ethereum liquid staking protocol solving the problem of frozen staked ether on Consensus Layer
* being unavailable for transfers and DeFi on Execution Layer.
*
* Since balances of all token holders change when the amount of total pooled Ether
* changes, this token cannot fully implement ERC20 standard: it only emits `Transfer`
* events upon explicit transfer between holders. In contrast, when Lido oracle reports
* rewards, no Transfer events are generated: doing so would require emitting an event
* for each token holder and thus running an unbounded loop.
*
* ---
* NB: Order of inheritance must preserve the structured storage layout of the previous versions.
*
* @dev Lido is derived from `StETHPermit` that has a structured storage:
* SLOT 0: mapping (address => uint256) private shares (`StETH`)
* SLOT 1: mapping (address => mapping (address => uint256)) private allowances (`StETH`)
* SLOT 2: mapping(address => uint256) internal noncesByAddress (`StETHPermit`)
*
* `Versioned` and `AragonApp` both don't have the pre-allocated structured storage.
*/
contract Lido is Versioned, StETHPermit, AragonApp {
    using SafeMath for uint256;
    using UnstructuredStorage for bytes32;
    using StakeLimitUnstructuredStorage for bytes32;
    using StakeLimitUtils for StakeLimitState.Data;
    /// ACL
    bytes32 public constant PAUSE_ROLE =
        0x139c2898040ef16910dc9f44dc697df79363da767d8bc92f2e310312b816e46d; // keccak256("PAUSE_ROLE");
    bytes32 public constant RESUME_ROLE =
        0x2fc10cc8ae19568712f7a176fb4978616a610650813c9d05326c34abb62749c7; // keccak256("RESUME_ROLE");
    bytes32 public constant STAKING_PAUSE_ROLE =
        0x84ea57490227bc2be925c684e2a367071d69890b629590198f4125a018eb1de8; // keccak256("STAKING_PAUSE_ROLE")
    bytes32 public constant STAKING_CONTROL_ROLE =
        0xa42eee1333c0758ba72be38e728b6dadb32ea767de5b4ddbaea1dae85b1b051f; // keccak256("STAKING_CONTROL_ROLE")
    bytes32 public constant UNSAFE_CHANGE_DEPOSITED_VALIDATORS_ROLE =
        0xe6dc5d79630c61871e99d341ad72c5a052bed2fc8c79e5a4480a7cd31117576c; // keccak256("UNSAFE_CHANGE_DEPOSITED_VALIDATORS_ROLE")
    uint256 private constant DEPOSIT_SIZE = 32 ether;
    /// @dev storage slot position for the Lido protocol contracts locator
    bytes32 internal constant LIDO_LOCATOR_POSITION =
        0x9ef78dff90f100ea94042bd00ccb978430524befc391d3e510b5f55ff3166df7; // keccak256("lido.Lido.lidoLocator")
    /// @dev storage slot position of the staking rate limit structure
    bytes32 internal constant STAKING_STATE_POSITION =
        0xa3678de4a579be090bed1177e0a24f77cc29d181ac22fd7688aca344d8938015; // keccak256("lido.Lido.stakeLimit");
    /// @dev amount of Ether (on the current Ethereum side) buffered on this smart contract balance
    bytes32 internal constant BUFFERED_ETHER_POSITION =
        0xed310af23f61f96daefbcd140b306c0bdbf8c178398299741687b90e794772b0; // keccak256("lido.Lido.bufferedEther");
    /// @dev number of deposited validators (incrementing counter of deposit operations).
    bytes32 internal constant DEPOSITED_VALIDATORS_POSITION =
        0xe6e35175eb53fc006520a2a9c3e9711a7c00de6ff2c32dd31df8c5a24cac1b5c; // keccak256("lido.Lido.depositedValidators");
    /// @dev total amount of ether on Consensus Layer (sum of all the balances of Lido validators)
    // "beacon" in the `keccak256()` parameter is staying here for compatibility reason
    bytes32 internal constant CL_BALANCE_POSITION =
        0xa66d35f054e68143c18f32c990ed5cb972bb68a68f500cd2dd3a16bbf3686483; // keccak256("lido.Lido.beaconBalance");
    /// @dev number of Lido's validators available in the Consensus Layer state
    // "beacon" in the `keccak256()` parameter is staying here for compatibility reason
    bytes32 internal constant CL_VALIDATORS_POSITION =
        0x9f70001d82b6ef54e9d3725b46581c3eb9ee3aa02b941b6aa54d678a9ca35b10; // keccak256("lido.Lido.beaconValidators");
    /// @dev Just a counter of total amount of execution layer rewards received by Lido contract. Not used in the logic.
    bytes32 internal constant TOTAL_EL_REWARDS_COLLECTED_POSITION =
        0xafe016039542d12eec0183bb0b1ffc2ca45b027126a494672fba4154ee77facb; // keccak256("lido.Lido.totalELRewardsCollected");
    // Staking was paused (don't accept user's ether submits)
    event StakingPaused();
    // Staking was resumed (accept user's ether submits)
    event StakingResumed();
    // Staking limit was set (rate limits user's submits)
    event StakingLimitSet(uint256 maxStakeLimit, uint256 stakeLimitIncreasePerBlock);
    // Staking limit was removed
    event StakingLimitRemoved();
    // Emits when validators number delivered by the oracle
    event CLValidatorsUpdated(
        uint256 indexed reportTimestamp,
        uint256 preCLValidators,
        uint256 postCLValidators
    );
    // Emits when var at `DEPOSITED_VALIDATORS_POSITION` changed
    event DepositedValidatorsChanged(
        uint256 depositedValidators
    );
    // Emits when oracle accounting report processed
    event ETHDistributed(
        uint256 indexed reportTimestamp,
        uint256 preCLBalance,
        uint256 postCLBalance,
        uint256 withdrawalsWithdrawn,
        uint256 executionLayerRewardsWithdrawn,
        uint256 postBufferedEther
    );
    // Emits when token rebased (total supply and/or total shares were changed)
    event TokenRebased(
        uint256 indexed reportTimestamp,
        uint256 timeElapsed,
        uint256 preTotalShares,
        uint256 preTotalEther,
        uint256 postTotalShares,
        uint256 postTotalEther,
        uint256 sharesMintedAsFees
    );
    // Lido locator set
    event LidoLocatorSet(address lidoLocator);
    // The amount of ETH withdrawn from LidoExecutionLayerRewardsVault to Lido
    event ELRewardsReceived(uint256 amount);
    // The amount of ETH withdrawn from WithdrawalVault to Lido
    event WithdrawalsReceived(uint256 amount);
    // Records a deposit made by a user
    event Submitted(address indexed sender, uint256 amount, address referral);
    // The `amount` of ether was sent to the deposit_contract.deposit function
    event Unbuffered(uint256 amount);
    /**
    * @dev As AragonApp, Lido contract must be initialized with following variables:
    *      NB: by default, staking and the whole Lido pool are in paused state
    *
    * The contract's balance must be non-zero to allow initial holder bootstrap.
    *
    * @param _lidoLocator lido locator contract
    * @param _eip712StETH eip712 helper contract for StETH
    */
    function initialize(address _lidoLocator, address _eip712StETH)
        public
        payable
        onlyInit
    {
        _bootstrapInitialHolder();
        _initialize_v2(_lidoLocator, _eip712StETH);
        initialized();
    }
    /**
     * initializer for the Lido version "2"
     */
    function _initialize_v2(address _lidoLocator, address _eip712StETH) internal {
        _setContractVersion(2);
        LIDO_LOCATOR_POSITION.setStorageAddress(_lidoLocator);
        _initializeEIP712StETH(_eip712StETH);
        // set infinite allowance for burner from withdrawal queue
        // to burn finalized requests' shares
        _approve(
            ILidoLocator(_lidoLocator).withdrawalQueue(),
            ILidoLocator(_lidoLocator).burner(),
            INFINITE_ALLOWANCE
        );
        emit LidoLocatorSet(_lidoLocator);
    }
    /**
     * @notice A function to finalize upgrade to v2 (from v1). Can be called only once
     * @dev Value "1" in CONTRACT_VERSION_POSITION is skipped due to change in numbering
     *
     * The initial protocol token holder must exist.
     *
     * For more details see https://github.com/lidofinance/lido-improvement-proposals/blob/develop/LIPS/lip-10.md
     */
    function finalizeUpgrade_v2(address _lidoLocator, address _eip712StETH) external {
        _checkContractVersion(0);
        require(hasInitialized(), "NOT_INITIALIZED");
        require(_lidoLocator != address(0), "LIDO_LOCATOR_ZERO_ADDRESS");
        require(_eip712StETH != address(0), "EIP712_STETH_ZERO_ADDRESS");
        require(_sharesOf(INITIAL_TOKEN_HOLDER) != 0, "INITIAL_HOLDER_EXISTS");
        _initialize_v2(_lidoLocator, _eip712StETH);
    }
    /**
     * @notice Stops accepting new Ether to the protocol
     *
     * @dev While accepting new Ether is stopped, calls to the `submit` function,
     * as well as to the default payable function, will revert.
     *
     * Emits `StakingPaused` event.
     */
    function pauseStaking() external {
        _auth(STAKING_PAUSE_ROLE);
        _pauseStaking();
    }
    /**
     * @notice Resumes accepting new Ether to the protocol (if `pauseStaking` was called previously)
     * NB: Staking could be rate-limited by imposing a limit on the stake amount
     * at each moment in time, see `setStakingLimit()` and `removeStakingLimit()`
     *
     * @dev Preserves staking limit if it was set previously
     *
     * Emits `StakingResumed` event
     */
    function resumeStaking() external {
        _auth(STAKING_CONTROL_ROLE);
        require(hasInitialized(), "NOT_INITIALIZED");
        _resumeStaking();
    }
    /**
     * @notice Sets the staking rate limit
     *
     * ▲ Stake limit
     * │.....  .....   ........ ...            ....     ... Stake limit = max
     * │      .       .        .   .   .      .    . . .
     * │     .       .              . .  . . .      . .
     * │            .                .  . . .
     * │──────────────────────────────────────────────────> Time
     * │     ^      ^          ^   ^^^  ^ ^ ^     ^^^ ^     Stake events
     *
     * @dev Reverts if:
     * - `_maxStakeLimit` == 0
     * - `_maxStakeLimit` >= 2^96
     * - `_maxStakeLimit` < `_stakeLimitIncreasePerBlock`
     * - `_maxStakeLimit` / `_stakeLimitIncreasePerBlock` >= 2^32 (only if `_stakeLimitIncreasePerBlock` != 0)
     *
     * Emits `StakingLimitSet` event
     *
     * @param _maxStakeLimit max stake limit value
     * @param _stakeLimitIncreasePerBlock stake limit increase per single block
     */
    function setStakingLimit(uint256 _maxStakeLimit, uint256 _stakeLimitIncreasePerBlock) external {
        _auth(STAKING_CONTROL_ROLE);
        STAKING_STATE_POSITION.setStorageStakeLimitStruct(
            STAKING_STATE_POSITION.getStorageStakeLimitStruct().setStakingLimit(_maxStakeLimit, _stakeLimitIncreasePerBlock)
        );
        emit StakingLimitSet(_maxStakeLimit, _stakeLimitIncreasePerBlock);
    }
    /**
     * @notice Removes the staking rate limit
     *
     * Emits `StakingLimitRemoved` event
     */
    function removeStakingLimit() external {
        _auth(STAKING_CONTROL_ROLE);
        STAKING_STATE_POSITION.setStorageStakeLimitStruct(STAKING_STATE_POSITION.getStorageStakeLimitStruct().removeStakingLimit());
        emit StakingLimitRemoved();
    }
    /**
     * @notice Check staking state: whether it's paused or not
     */
    function isStakingPaused() external view returns (bool) {
        return STAKING_STATE_POSITION.getStorageStakeLimitStruct().isStakingPaused();
    }
    /**
     * @notice Returns how much Ether can be staked in the current block
     * @dev Special return values:
     * - 2^256 - 1 if staking is unlimited;
     * - 0 if staking is paused or if limit is exhausted.
     */
    function getCurrentStakeLimit() external view returns (uint256) {
        return _getCurrentStakeLimit(STAKING_STATE_POSITION.getStorageStakeLimitStruct());
    }
    /**
     * @notice Returns full info about current stake limit params and state
     * @dev Might be used for the advanced integration requests.
     * @return isStakingPaused staking pause state (equivalent to return of isStakingPaused())
     * @return isStakingLimitSet whether the stake limit is set
     * @return currentStakeLimit current stake limit (equivalent to return of getCurrentStakeLimit())
     * @return maxStakeLimit max stake limit
     * @return maxStakeLimitGrowthBlocks blocks needed to restore max stake limit from the fully exhausted state
     * @return prevStakeLimit previously reached stake limit
     * @return prevStakeBlockNumber previously seen block number
     */
    function getStakeLimitFullInfo()
        external
        view
        returns (
            bool isStakingPaused,
            bool isStakingLimitSet,
            uint256 currentStakeLimit,
            uint256 maxStakeLimit,
            uint256 maxStakeLimitGrowthBlocks,
            uint256 prevStakeLimit,
            uint256 prevStakeBlockNumber
        )
    {
        StakeLimitState.Data memory stakeLimitData = STAKING_STATE_POSITION.getStorageStakeLimitStruct();
        isStakingPaused = stakeLimitData.isStakingPaused();
        isStakingLimitSet = stakeLimitData.isStakingLimitSet();
        currentStakeLimit = _getCurrentStakeLimit(stakeLimitData);
        maxStakeLimit = stakeLimitData.maxStakeLimit;
        maxStakeLimitGrowthBlocks = stakeLimitData.maxStakeLimitGrowthBlocks;
        prevStakeLimit = stakeLimitData.prevStakeLimit;
        prevStakeBlockNumber = stakeLimitData.prevStakeBlockNumber;
    }
    /**
    * @notice Send funds to the pool
    * @dev Users are able to submit their funds by transacting to the fallback function.
    * Unlike vanilla Ethereum Deposit contract, accepting only 32-Ether transactions, Lido
    * accepts payments of any size. Submitted Ethers are stored in Buffer until someone calls
    * deposit() and pushes them to the Ethereum Deposit contract.
    */
    // solhint-disable-next-line no-complex-fallback
    function() external payable {
        // protection against accidental submissions by calling non-existent function
        require(msg.data.length == 0, "NON_EMPTY_DATA");
        _submit(0);
    }
    /**
     * @notice Send funds to the pool with optional _referral parameter
     * @dev This function is alternative way to submit funds. Supports optional referral address.
     * @return Amount of StETH shares generated
     */
    function submit(address _referral) external payable returns (uint256) {
        return _submit(_referral);
    }
    /**
     * @notice A payable function for execution layer rewards. Can be called only by `ExecutionLayerRewardsVault`
     * @dev We need a dedicated function because funds received by the default payable function
     * are treated as a user deposit
     */
    function receiveELRewards() external payable {
        require(msg.sender == getLidoLocator().elRewardsVault());
        TOTAL_EL_REWARDS_COLLECTED_POSITION.setStorageUint256(getTotalELRewardsCollected().add(msg.value));
        emit ELRewardsReceived(msg.value);
    }
    /**
    * @notice A payable function for withdrawals acquisition. Can be called only by `WithdrawalVault`
    * @dev We need a dedicated function because funds received by the default payable function
    * are treated as a user deposit
    */
    function receiveWithdrawals() external payable {
        require(msg.sender == getLidoLocator().withdrawalVault());
        emit WithdrawalsReceived(msg.value);
    }
    /**
     * @notice Stop pool routine operations
     */
    function stop() external {
        _auth(PAUSE_ROLE);
        _stop();
        _pauseStaking();
    }
    /**
     * @notice Resume pool routine operations
     * @dev Staking is resumed after this call using the previously set limits (if any)
     */
    function resume() external {
        _auth(RESUME_ROLE);
        _resume();
        _resumeStaking();
    }
    /**
     * The structure is used to aggregate the `handleOracleReport` provided data.
     * @dev Using the in-memory structure addresses `stack too deep` issues.
     */
    struct OracleReportedData {
        // Oracle timings
        uint256 reportTimestamp;
        uint256 timeElapsed;
        // CL values
        uint256 clValidators;
        uint256 postCLBalance;
        // EL values
        uint256 withdrawalVaultBalance;
        uint256 elRewardsVaultBalance;
        uint256 sharesRequestedToBurn;
        // Decision about withdrawals processing
        uint256[] withdrawalFinalizationBatches;
        uint256 simulatedShareRate;
    }
    /**
     * The structure is used to preload the contract using `getLidoLocator()` via single call
     */
    struct OracleReportContracts {
        address accountingOracle;
        address elRewardsVault;
        address oracleReportSanityChecker;
        address burner;
        address withdrawalQueue;
        address withdrawalVault;
        address postTokenRebaseReceiver;
    }
    /**
    * @notice Updates accounting stats, collects EL rewards and distributes collected rewards
    *         if beacon balance increased, performs withdrawal requests finalization
    * @dev periodically called by the AccountingOracle contract
    *
    * @param _reportTimestamp the moment of the oracle report calculation
    * @param _timeElapsed seconds elapsed since the previous report calculation
    * @param _clValidators number of Lido validators on Consensus Layer
    * @param _clBalance sum of all Lido validators' balances on Consensus Layer
    * @param _withdrawalVaultBalance withdrawal vault balance on Execution Layer at `_reportTimestamp`
    * @param _elRewardsVaultBalance elRewards vault balance on Execution Layer at `_reportTimestamp`
    * @param _sharesRequestedToBurn shares requested to burn through Burner at `_reportTimestamp`
    * @param _withdrawalFinalizationBatches the ascendingly-sorted array of withdrawal request IDs obtained by calling
    * WithdrawalQueue.calculateFinalizationBatches. Empty array means that no withdrawal requests should be finalized
    * @param _simulatedShareRate share rate that was simulated by oracle when the report data created (1e27 precision)
    *
    * NB: `_simulatedShareRate` should be calculated off-chain by calling the method with `eth_call` JSON-RPC API
    * while passing empty `_withdrawalFinalizationBatches` and `_simulatedShareRate` == 0, plugging the returned values
    * to the following formula: `_simulatedShareRate = (postTotalPooledEther * 1e27) / postTotalShares`
    *
    * @return postRebaseAmounts[0]: `postTotalPooledEther` amount of ether in the protocol after report
    * @return postRebaseAmounts[1]: `postTotalShares` amount of shares in the protocol after report
    * @return postRebaseAmounts[2]: `withdrawals` withdrawn from the withdrawals vault
    * @return postRebaseAmounts[3]: `elRewards` withdrawn from the execution layer rewards vault
    */
    function handleOracleReport(
        // Oracle timings
        uint256 _reportTimestamp,
        uint256 _timeElapsed,
        // CL values
        uint256 _clValidators,
        uint256 _clBalance,
        // EL values
        uint256 _withdrawalVaultBalance,
        uint256 _elRewardsVaultBalance,
        uint256 _sharesRequestedToBurn,
        // Decision about withdrawals processing
        uint256[] _withdrawalFinalizationBatches,
        uint256 _simulatedShareRate
    ) external returns (uint256[4] postRebaseAmounts) {
        _whenNotStopped();
        return _handleOracleReport(
            OracleReportedData(
                _reportTimestamp,
                _timeElapsed,
                _clValidators,
                _clBalance,
                _withdrawalVaultBalance,
                _elRewardsVaultBalance,
                _sharesRequestedToBurn,
                _withdrawalFinalizationBatches,
                _simulatedShareRate
            )
        );
    }
    /**
     * @notice Unsafely change deposited validators
     *
     * The method unsafely changes deposited validator counter.
     * Can be required when onboarding external validators to Lido
     * (i.e., had deposited before and rotated their type-0x00 withdrawal credentials to Lido)
     *
     * @param _newDepositedValidators new value
     */
    function unsafeChangeDepositedValidators(uint256 _newDepositedValidators) external {
        _auth(UNSAFE_CHANGE_DEPOSITED_VALIDATORS_ROLE);
        DEPOSITED_VALIDATORS_POSITION.setStorageUint256(_newDepositedValidators);
        emit DepositedValidatorsChanged(_newDepositedValidators);
    }
    /**
     * @notice Overrides default AragonApp behaviour to disallow recovery.
     */
    function transferToVault(address /* _token */) external {
        revert("NOT_SUPPORTED");
    }
    /**
    * @notice Get the amount of Ether temporary buffered on this contract balance
    * @dev Buffered balance is kept on the contract from the moment the funds are received from user
    * until the moment they are actually sent to the official Deposit contract.
    * @return amount of buffered funds in wei
    */
    function getBufferedEther() external view returns (uint256) {
        return _getBufferedEther();
    }
    /**
     * @notice Get total amount of execution layer rewards collected to Lido contract
     * @dev Ether got through LidoExecutionLayerRewardsVault is kept on this contract's balance the same way
     * as other buffered Ether is kept (until it gets deposited)
     * @return amount of funds received as execution layer rewards in wei
     */
    function getTotalELRewardsCollected() public view returns (uint256) {
        return TOTAL_EL_REWARDS_COLLECTED_POSITION.getStorageUint256();
    }
    /**
     * @notice Gets authorized oracle address
     * @return address of oracle contract
     */
    function getLidoLocator() public view returns (ILidoLocator) {
        return ILidoLocator(LIDO_LOCATOR_POSITION.getStorageAddress());
    }
    /**
    * @notice Returns the key values related to Consensus Layer side of the contract. It historically contains beacon
    * @return depositedValidators - number of deposited validators from Lido contract side
    * @return beaconValidators - number of Lido validators visible on Consensus Layer, reported by oracle
    * @return beaconBalance - total amount of ether on the Consensus Layer side (sum of all the balances of Lido validators)
    *
    * @dev `beacon` in naming still here for historical reasons
    */
    function getBeaconStat() external view returns (uint256 depositedValidators, uint256 beaconValidators, uint256 beaconBalance) {
        depositedValidators = DEPOSITED_VALIDATORS_POSITION.getStorageUint256();
        beaconValidators = CL_VALIDATORS_POSITION.getStorageUint256();
        beaconBalance = CL_BALANCE_POSITION.getStorageUint256();
    }
    /**
     * @dev Check that Lido allows depositing buffered ether to the consensus layer
     * Depends on the bunker state and protocol's pause state
     */
    function canDeposit() public view returns (bool) {
        return !_withdrawalQueue().isBunkerModeActive() && !isStopped();
    }
    /**
     * @dev Returns depositable ether amount.
     * Takes into account unfinalized stETH required by WithdrawalQueue
     */
    function getDepositableEther() public view returns (uint256) {
        uint256 bufferedEther = _getBufferedEther();
        uint256 withdrawalReserve = _withdrawalQueue().unfinalizedStETH();
        return bufferedEther > withdrawalReserve ? bufferedEther - withdrawalReserve : 0;
    }
    /**
     * @dev Invokes a deposit call to the Staking Router contract and updates buffered counters
     * @param _maxDepositsCount max deposits count
     * @param _stakingModuleId id of the staking module to be deposited
     * @param _depositCalldata module calldata
     */
    function deposit(uint256 _maxDepositsCount, uint256 _stakingModuleId, bytes _depositCalldata) external {
        ILidoLocator locator = getLidoLocator();
        require(msg.sender == locator.depositSecurityModule(), "APP_AUTH_DSM_FAILED");
        require(canDeposit(), "CAN_NOT_DEPOSIT");
        IStakingRouter stakingRouter = _stakingRouter();
        uint256 depositsCount = Math256.min(
            _maxDepositsCount,
            stakingRouter.getStakingModuleMaxDepositsCount(_stakingModuleId, getDepositableEther())
        );
        uint256 depositsValue;
        if (depositsCount > 0) {
            depositsValue = depositsCount.mul(DEPOSIT_SIZE);
            /// @dev firstly update the local state of the contract to prevent a reentrancy attack,
            ///     even if the StakingRouter is a trusted contract.
            BUFFERED_ETHER_POSITION.setStorageUint256(_getBufferedEther().sub(depositsValue));
            emit Unbuffered(depositsValue);
            uint256 newDepositedValidators = DEPOSITED_VALIDATORS_POSITION.getStorageUint256().add(depositsCount);
            DEPOSITED_VALIDATORS_POSITION.setStorageUint256(newDepositedValidators);
            emit DepositedValidatorsChanged(newDepositedValidators);
        }
        /// @dev transfer ether to StakingRouter and make a deposit at the same time. All the ether
        ///     sent to StakingRouter is counted as deposited. If StakingRouter can't deposit all
        ///     passed ether it MUST revert the whole transaction (never happens in normal circumstances)
        stakingRouter.deposit.value(depositsValue)(depositsCount, _stakingModuleId, _depositCalldata);
    }
    /// DEPRECATED PUBLIC METHODS
    /**
     * @notice Returns current withdrawal credentials of deposited validators
     * @dev DEPRECATED: use StakingRouter.getWithdrawalCredentials() instead
     */
    function getWithdrawalCredentials() external view returns (bytes32) {
        return _stakingRouter().getWithdrawalCredentials();
    }
    /**
     * @notice Returns legacy oracle
     * @dev DEPRECATED: the `AccountingOracle` superseded the old one
     */
    function getOracle() external view returns (address) {
        return getLidoLocator().legacyOracle();
    }
    /**
     * @notice Returns the treasury address
     * @dev DEPRECATED: use LidoLocator.treasury()
     */
    function getTreasury() external view returns (address) {
        return _treasury();
    }
    /**
     * @notice Returns current staking rewards fee rate
     * @dev DEPRECATED: Now fees information is stored in StakingRouter and
     * with higher precision. Use StakingRouter.getStakingFeeAggregateDistribution() instead.
     * @return totalFee total rewards fee in 1e4 precision (10000 is 100%). The value might be
     * inaccurate because the actual value is truncated here to 1e4 precision.
     */
    function getFee() external view returns (uint16 totalFee) {
        totalFee = _stakingRouter().getTotalFeeE4Precision();
    }
    /**
     * @notice Returns current fee distribution, values relative to the total fee (getFee())
     * @dev DEPRECATED: Now fees information is stored in StakingRouter and
     * with higher precision. Use StakingRouter.getStakingFeeAggregateDistribution() instead.
     * @return treasuryFeeBasisPoints return treasury fee in TOTAL_BASIS_POINTS (10000 is 100% fee) precision
     * @return insuranceFeeBasisPoints always returns 0 because the capability to send fees to
     * insurance from Lido contract is removed.
     * @return operatorsFeeBasisPoints return total fee for all operators of all staking modules in
     * TOTAL_BASIS_POINTS (10000 is 100% fee) precision.
     * Previously returned total fee of all node operators of NodeOperatorsRegistry (Curated staking module now)
     * The value might be inaccurate because the actual value is truncated here to 1e4 precision.
     */
    function getFeeDistribution()
        external view
        returns (
            uint16 treasuryFeeBasisPoints,
            uint16 insuranceFeeBasisPoints,
            uint16 operatorsFeeBasisPoints
        )
    {
        IStakingRouter stakingRouter = _stakingRouter();
        uint256 totalBasisPoints = stakingRouter.TOTAL_BASIS_POINTS();
        uint256 totalFee = stakingRouter.getTotalFeeE4Precision();
        (uint256 treasuryFeeBasisPointsAbs, uint256 operatorsFeeBasisPointsAbs) = stakingRouter
            .getStakingFeeAggregateDistributionE4Precision();
        insuranceFeeBasisPoints = 0;  // explicitly set to zero
        treasuryFeeBasisPoints = uint16((treasuryFeeBasisPointsAbs * totalBasisPoints) / totalFee);
        operatorsFeeBasisPoints = uint16((operatorsFeeBasisPointsAbs * totalBasisPoints) / totalFee);
    }
    /*
     * @dev updates Consensus Layer state snapshot according to the current report
     *
     * NB: conventions and assumptions
     *
     * `depositedValidators` are total amount of the **ever** deposited Lido validators
     * `_postClValidators` are total amount of the **ever** appeared on the CL side Lido validators
     *
     * i.e., exited Lido validators persist in the state, just with a different status
     */
    function _processClStateUpdate(
        uint256 _reportTimestamp,
        uint256 _preClValidators,
        uint256 _postClValidators,
        uint256 _postClBalance
    ) internal returns (uint256 preCLBalance) {
        uint256 depositedValidators = DEPOSITED_VALIDATORS_POSITION.getStorageUint256();
        require(_postClValidators <= depositedValidators, "REPORTED_MORE_DEPOSITED");
        require(_postClValidators >= _preClValidators, "REPORTED_LESS_VALIDATORS");
        if (_postClValidators > _preClValidators) {
            CL_VALIDATORS_POSITION.setStorageUint256(_postClValidators);
        }
        uint256 appearedValidators = _postClValidators - _preClValidators;
        preCLBalance = CL_BALANCE_POSITION.getStorageUint256();
        // Take into account the balance of the newly appeared validators
        preCLBalance = preCLBalance.add(appearedValidators.mul(DEPOSIT_SIZE));
        // Save the current CL balance and validators to
        // calculate rewards on the next push
        CL_BALANCE_POSITION.setStorageUint256(_postClBalance);
        emit CLValidatorsUpdated(_reportTimestamp, _preClValidators, _postClValidators);
    }
    /**
     * @dev collect ETH from ELRewardsVault and WithdrawalVault, then send to WithdrawalQueue
     */
    function _collectRewardsAndProcessWithdrawals(
        OracleReportContracts memory _contracts,
        uint256 _withdrawalsToWithdraw,
        uint256 _elRewardsToWithdraw,
        uint256[] _withdrawalFinalizationBatches,
        uint256 _simulatedShareRate,
        uint256 _etherToLockOnWithdrawalQueue
    ) internal {
        // withdraw execution layer rewards and put them to the buffer
        if (_elRewardsToWithdraw > 0) {
            ILidoExecutionLayerRewardsVault(_contracts.elRewardsVault).withdrawRewards(_elRewardsToWithdraw);
        }
        // withdraw withdrawals and put them to the buffer
        if (_withdrawalsToWithdraw > 0) {
            IWithdrawalVault(_contracts.withdrawalVault).withdrawWithdrawals(_withdrawalsToWithdraw);
        }
        // finalize withdrawals (send ether, assign shares for burning)
        if (_etherToLockOnWithdrawalQueue > 0) {
            IWithdrawalQueue withdrawalQueue = IWithdrawalQueue(_contracts.withdrawalQueue);
            withdrawalQueue.finalize.value(_etherToLockOnWithdrawalQueue)(
                _withdrawalFinalizationBatches[_withdrawalFinalizationBatches.length - 1],
                _simulatedShareRate
            );
        }
        uint256 postBufferedEther = _getBufferedEther()
            .add(_elRewardsToWithdraw) // Collected from ELVault
            .add(_withdrawalsToWithdraw) // Collected from WithdrawalVault
            .sub(_etherToLockOnWithdrawalQueue); // Sent to WithdrawalQueue
        _setBufferedEther(postBufferedEther);
    }
    /**
     * @dev return amount to lock on withdrawal queue and shares to burn
     * depending on the finalization batch parameters
     */
    function _calculateWithdrawals(
        OracleReportContracts memory _contracts,
        OracleReportedData memory _reportedData
    ) internal view returns (
        uint256 etherToLock, uint256 sharesToBurn
    ) {
        IWithdrawalQueue withdrawalQueue = IWithdrawalQueue(_contracts.withdrawalQueue);
        if (!withdrawalQueue.isPaused()) {
            IOracleReportSanityChecker(_contracts.oracleReportSanityChecker).checkWithdrawalQueueOracleReport(
                _reportedData.withdrawalFinalizationBatches[_reportedData.withdrawalFinalizationBatches.length - 1],
                _reportedData.reportTimestamp
            );
            (etherToLock, sharesToBurn) = withdrawalQueue.prefinalize(
                _reportedData.withdrawalFinalizationBatches,
                _reportedData.simulatedShareRate
            );
        }
    }
    /**
     * @dev calculate the amount of rewards and distribute it
     */
    function _processRewards(
        OracleReportContext memory _reportContext,
        uint256 _postCLBalance,
        uint256 _withdrawnWithdrawals,
        uint256 _withdrawnElRewards
    ) internal returns (uint256 sharesMintedAsFees) {
        uint256 postCLTotalBalance = _postCLBalance.add(_withdrawnWithdrawals);
        // Don’t mint/distribute any protocol fee on the non-profitable Lido oracle report
        // (when consensus layer balance delta is zero or negative).
        // See LIP-12 for details:
        // https://research.lido.fi/t/lip-12-on-chain-part-of-the-rewards-distribution-after-the-merge/1625
        if (postCLTotalBalance > _reportContext.preCLBalance) {
            uint256 consensusLayerRewards = postCLTotalBalance - _reportContext.preCLBalance;
            sharesMintedAsFees = _distributeFee(
                _reportContext.preTotalPooledEther,
                _reportContext.preTotalShares,
                consensusLayerRewards.add(_withdrawnElRewards)
            );
        }
    }
    /**
     * @dev Process user deposit, mints liquid tokens and increase the pool buffer
     * @param _referral address of referral.
     * @return amount of StETH shares generated
     */
    function _submit(address _referral) internal returns (uint256) {
        require(msg.value != 0, "ZERO_DEPOSIT");
        StakeLimitState.Data memory stakeLimitData = STAKING_STATE_POSITION.getStorageStakeLimitStruct();
        // There is an invariant that protocol pause also implies staking pause.
        // Thus, no need to check protocol pause explicitly.
        require(!stakeLimitData.isStakingPaused(), "STAKING_PAUSED");
        if (stakeLimitData.isStakingLimitSet()) {
            uint256 currentStakeLimit = stakeLimitData.calculateCurrentStakeLimit();
            require(msg.value <= currentStakeLimit, "STAKE_LIMIT");
            STAKING_STATE_POSITION.setStorageStakeLimitStruct(stakeLimitData.updatePrevStakeLimit(currentStakeLimit - msg.value));
        }
        uint256 sharesAmount = getSharesByPooledEth(msg.value);
        _mintShares(msg.sender, sharesAmount);
        _setBufferedEther(_getBufferedEther().add(msg.value));
        emit Submitted(msg.sender, msg.value, _referral);
        _emitTransferAfterMintingShares(msg.sender, sharesAmount);
        return sharesAmount;
    }
    /**
     * @dev Staking router rewards distribution.
     *
     * Corresponds to the return value of `IStakingRouter.newTotalPooledEtherForRewards()`
     * Prevents `stack too deep` issue.
     */
    struct StakingRewardsDistribution {
        address[] recipients;
        uint256[] moduleIds;
        uint96[] modulesFees;
        uint96 totalFee;
        uint256 precisionPoints;
    }
    /**
     * @dev Get staking rewards distribution from staking router.
     */
    function _getStakingRewardsDistribution() internal view returns (
        StakingRewardsDistribution memory ret,
        IStakingRouter router
    ) {
        router = _stakingRouter();
        (
            ret.recipients,
            ret.moduleIds,
            ret.modulesFees,
            ret.totalFee,
            ret.precisionPoints
        ) = router.getStakingRewardsDistribution();
        require(ret.recipients.length == ret.modulesFees.length, "WRONG_RECIPIENTS_INPUT");
        require(ret.moduleIds.length == ret.modulesFees.length, "WRONG_MODULE_IDS_INPUT");
    }
    /**
     * @dev Distributes fee portion of the rewards by minting and distributing corresponding amount of liquid tokens.
     * @param _preTotalPooledEther Total supply before report-induced changes applied
     * @param _preTotalShares Total shares before report-induced changes applied
     * @param _totalRewards Total rewards accrued both on the Execution Layer and the Consensus Layer sides in wei.
     */
    function _distributeFee(
        uint256 _preTotalPooledEther,
        uint256 _preTotalShares,
        uint256 _totalRewards
    ) internal returns (uint256 sharesMintedAsFees) {
        // We need to take a defined percentage of the reported reward as a fee, and we do
        // this by minting new token shares and assigning them to the fee recipients (see
        // StETH docs for the explanation of the shares mechanics). The staking rewards fee
        // is defined in basis points (1 basis point is equal to 0.01%, 10000 (TOTAL_BASIS_POINTS) is 100%).
        //
        // Since we are increasing totalPooledEther by _totalRewards (totalPooledEtherWithRewards),
        // the combined cost of all holders' shares has became _totalRewards StETH tokens more,
        // effectively splitting the reward between each token holder proportionally to their token share.
        //
        // Now we want to mint new shares to the fee recipient, so that the total cost of the
        // newly-minted shares exactly corresponds to the fee taken:
        //
        // totalPooledEtherWithRewards = _preTotalPooledEther + _totalRewards
        // shares2mint * newShareCost = (_totalRewards * totalFee) / PRECISION_POINTS
        // newShareCost = totalPooledEtherWithRewards / (_preTotalShares + shares2mint)
        //
        // which follows to:
        //
        //                        _totalRewards * totalFee * _preTotalShares
        // shares2mint = --------------------------------------------------------------
        //                 (totalPooledEtherWithRewards * PRECISION_POINTS) - (_totalRewards * totalFee)
        //
        // The effect is that the given percentage of the reward goes to the fee recipient, and
        // the rest of the reward is distributed between token holders proportionally to their
        // token shares.
        (
            StakingRewardsDistribution memory rewardsDistribution,
            IStakingRouter router
        ) = _getStakingRewardsDistribution();
        if (rewardsDistribution.totalFee > 0) {
            uint256 totalPooledEtherWithRewards = _preTotalPooledEther.add(_totalRewards);
            sharesMintedAsFees =
                _totalRewards.mul(rewardsDistribution.totalFee).mul(_preTotalShares).div(
                    totalPooledEtherWithRewards.mul(
                        rewardsDistribution.precisionPoints
                    ).sub(_totalRewards.mul(rewardsDistribution.totalFee))
                );
            _mintShares(address(this), sharesMintedAsFees);
            (uint256[] memory moduleRewards, uint256 totalModuleRewards) =
                _transferModuleRewards(
                    rewardsDistribution.recipients,
                    rewardsDistribution.modulesFees,
                    rewardsDistribution.totalFee,
                    sharesMintedAsFees
                );
            _transferTreasuryRewards(sharesMintedAsFees.sub(totalModuleRewards));
            router.reportRewardsMinted(
                rewardsDistribution.moduleIds,
                moduleRewards
            );
        }
    }
    function _transferModuleRewards(
        address[] memory recipients,
        uint96[] memory modulesFees,
        uint256 totalFee,
        uint256 totalRewards
    ) internal returns (uint256[] memory moduleRewards, uint256 totalModuleRewards) {
        moduleRewards = new uint256[](recipients.length);
        for (uint256 i; i < recipients.length; ++i) {
            if (modulesFees[i] > 0) {
                uint256 iModuleRewards = totalRewards.mul(modulesFees[i]).div(totalFee);
                moduleRewards[i] = iModuleRewards;
                _transferShares(address(this), recipients[i], iModuleRewards);
                _emitTransferAfterMintingShares(recipients[i], iModuleRewards);
                totalModuleRewards = totalModuleRewards.add(iModuleRewards);
            }
        }
    }
    function _transferTreasuryRewards(uint256 treasuryReward) internal {
        address treasury = _treasury();
        _transferShares(address(this), treasury, treasuryReward);
        _emitTransferAfterMintingShares(treasury, treasuryReward);
    }
    /**
     * @dev Gets the amount of Ether temporary buffered on this contract balance
     */
    function _getBufferedEther() internal view returns (uint256) {
        return BUFFERED_ETHER_POSITION.getStorageUint256();
    }
    function _setBufferedEther(uint256 _newBufferedEther) internal {
        BUFFERED_ETHER_POSITION.setStorageUint256(_newBufferedEther);
    }
    /// @dev Calculates and returns the total base balance (multiple of 32) of validators in transient state,
    ///     i.e. submitted to the official Deposit contract but not yet visible in the CL state.
    /// @return transient balance in wei (1e-18 Ether)
    function _getTransientBalance() internal view returns (uint256) {
        uint256 depositedValidators = DEPOSITED_VALIDATORS_POSITION.getStorageUint256();
        uint256 clValidators = CL_VALIDATORS_POSITION.getStorageUint256();
        // clValidators can never be less than deposited ones.
        assert(depositedValidators >= clValidators);
        return (depositedValidators - clValidators).mul(DEPOSIT_SIZE);
    }
    /**
     * @dev Gets the total amount of Ether controlled by the system
     * @return total balance in wei
     */
    function _getTotalPooledEther() internal view returns (uint256) {
        return _getBufferedEther()
            .add(CL_BALANCE_POSITION.getStorageUint256())
            .add(_getTransientBalance());
    }
    function _pauseStaking() internal {
        STAKING_STATE_POSITION.setStorageStakeLimitStruct(
            STAKING_STATE_POSITION.getStorageStakeLimitStruct().setStakeLimitPauseState(true)
        );
        emit StakingPaused();
    }
    function _resumeStaking() internal {
        STAKING_STATE_POSITION.setStorageStakeLimitStruct(
            STAKING_STATE_POSITION.getStorageStakeLimitStruct().setStakeLimitPauseState(false)
        );
        emit StakingResumed();
    }
    function _getCurrentStakeLimit(StakeLimitState.Data memory _stakeLimitData) internal view returns (uint256) {
        if (_stakeLimitData.isStakingPaused()) {
            return 0;
        }
        if (!_stakeLimitData.isStakingLimitSet()) {
            return uint256(-1);
        }
        return _stakeLimitData.calculateCurrentStakeLimit();
    }
    /**
     * @dev Size-efficient analog of the `auth(_role)` modifier
     * @param _role Permission name
     */
    function _auth(bytes32 _role) internal view {
        require(canPerform(msg.sender, _role, new uint256[](0)), "APP_AUTH_FAILED");
    }
    /**
     * @dev Intermediate data structure for `_handleOracleReport`
     * Helps to overcome `stack too deep` issue.
     */
    struct OracleReportContext {
        uint256 preCLValidators;
        uint256 preCLBalance;
        uint256 preTotalPooledEther;
        uint256 preTotalShares;
        uint256 etherToLockOnWithdrawalQueue;
        uint256 sharesToBurnFromWithdrawalQueue;
        uint256 simulatedSharesToBurn;
        uint256 sharesToBurn;
        uint256 sharesMintedAsFees;
    }
    /**
     * @dev Handle oracle report method operating with the data-packed structs
     * Using structs helps to overcome 'stack too deep' issue.
     *
     * The method updates the protocol's accounting state.
     * Key steps:
     * 1. Take a snapshot of the current (pre-) state
     * 2. Pass the report data to sanity checker (reverts if malformed)
     * 3. Pre-calculate the ether to lock for withdrawal queue and shares to be burnt
     * 4. Pass the accounting values to sanity checker to smoothen positive token rebase
     *    (i.e., postpone the extra rewards to be applied during the next rounds)
     * 5. Invoke finalization of the withdrawal requests
     * 6. Burn excess shares within the allowed limit (can postpone some shares to be burnt later)
     * 7. Distribute protocol fee (treasury & node operators)
     * 8. Complete token rebase by informing observers (emit an event and call the external receivers if any)
     * 9. Sanity check for the provided simulated share rate
     */
    function _handleOracleReport(OracleReportedData memory _reportedData) internal returns (uint256[4]) {
        OracleReportContracts memory contracts = _loadOracleReportContracts();
        require(msg.sender == contracts.accountingOracle, "APP_AUTH_FAILED");
        require(_reportedData.reportTimestamp <= block.timestamp, "INVALID_REPORT_TIMESTAMP");
        OracleReportContext memory reportContext;
        // Step 1.
        // Take a snapshot of the current (pre-) state
        reportContext.preTotalPooledEther = _getTotalPooledEther();
        reportContext.preTotalShares = _getTotalShares();
        reportContext.preCLValidators = CL_VALIDATORS_POSITION.getStorageUint256();
        reportContext.preCLBalance = _processClStateUpdate(
            _reportedData.reportTimestamp,
            reportContext.preCLValidators,
            _reportedData.clValidators,
            _reportedData.postCLBalance
        );
        // Step 2.
        // Pass the report data to sanity checker (reverts if malformed)
        _checkAccountingOracleReport(contracts, _reportedData, reportContext);
        // Step 3.
        // Pre-calculate the ether to lock for withdrawal queue and shares to be burnt
        // due to withdrawal requests to finalize
        if (_reportedData.withdrawalFinalizationBatches.length != 0) {
            (
                reportContext.etherToLockOnWithdrawalQueue,
                reportContext.sharesToBurnFromWithdrawalQueue
            ) = _calculateWithdrawals(contracts, _reportedData);
            if (reportContext.sharesToBurnFromWithdrawalQueue > 0) {
                IBurner(contracts.burner).requestBurnShares(
                    contracts.withdrawalQueue,
                    reportContext.sharesToBurnFromWithdrawalQueue
                );
            }
        }
        // Step 4.
        // Pass the accounting values to sanity checker to smoothen positive token rebase
        uint256 withdrawals;
        uint256 elRewards;
        (
            withdrawals, elRewards, reportContext.simulatedSharesToBurn, reportContext.sharesToBurn
        ) = IOracleReportSanityChecker(contracts.oracleReportSanityChecker).smoothenTokenRebase(
            reportContext.preTotalPooledEther,
            reportContext.preTotalShares,
            reportContext.preCLBalance,
            _reportedData.postCLBalance,
            _reportedData.withdrawalVaultBalance,
            _reportedData.elRewardsVaultBalance,
            _reportedData.sharesRequestedToBurn,
            reportContext.etherToLockOnWithdrawalQueue,
            reportContext.sharesToBurnFromWithdrawalQueue
        );
        // Step 5.
        // Invoke finalization of the withdrawal requests (send ether to withdrawal queue, assign shares to be burnt)
        _collectRewardsAndProcessWithdrawals(
            contracts,
            withdrawals,
            elRewards,
            _reportedData.withdrawalFinalizationBatches,
            _reportedData.simulatedShareRate,
            reportContext.etherToLockOnWithdrawalQueue
        );
        emit ETHDistributed(
            _reportedData.reportTimestamp,
            reportContext.preCLBalance,
            _reportedData.postCLBalance,
            withdrawals,
            elRewards,
            _getBufferedEther()
        );
        // Step 6.
        // Burn the previously requested shares
        if (reportContext.sharesToBurn > 0) {
            IBurner(contracts.burner).commitSharesToBurn(reportContext.sharesToBurn);
            _burnShares(contracts.burner, reportContext.sharesToBurn);
        }
        // Step 7.
        // Distribute protocol fee (treasury & node operators)
        reportContext.sharesMintedAsFees = _processRewards(
            reportContext,
            _reportedData.postCLBalance,
            withdrawals,
            elRewards
        );
        // Step 8.
        // Complete token rebase by informing observers (emit an event and call the external receivers if any)
        (
            uint256 postTotalShares,
            uint256 postTotalPooledEther
        ) = _completeTokenRebase(
            _reportedData,
            reportContext,
            IPostTokenRebaseReceiver(contracts.postTokenRebaseReceiver)
        );
        // Step 9. Sanity check for the provided simulated share rate
        if (_reportedData.withdrawalFinalizationBatches.length != 0) {
            IOracleReportSanityChecker(contracts.oracleReportSanityChecker).checkSimulatedShareRate(
                postTotalPooledEther,
                postTotalShares,
                reportContext.etherToLockOnWithdrawalQueue,
                reportContext.sharesToBurn.sub(reportContext.simulatedSharesToBurn),
                _reportedData.simulatedShareRate
            );
        }
        return [postTotalPooledEther, postTotalShares, withdrawals, elRewards];
    }
    /**
     * @dev Pass the provided oracle data to the sanity checker contract
     * Works with structures to overcome `stack too deep`
     */
    function _checkAccountingOracleReport(
        OracleReportContracts memory _contracts,
        OracleReportedData memory _reportedData,
        OracleReportContext memory _reportContext
    ) internal view {
        IOracleReportSanityChecker(_contracts.oracleReportSanityChecker).checkAccountingOracleReport(
            _reportedData.timeElapsed,
            _reportContext.preCLBalance,
            _reportedData.postCLBalance,
            _reportedData.withdrawalVaultBalance,
            _reportedData.elRewardsVaultBalance,
            _reportedData.sharesRequestedToBurn,
            _reportContext.preCLValidators,
            _reportedData.clValidators
        );
    }
    /**
     * @dev Notify observers about the completed token rebase.
     * Emit events and call external receivers.
     */
    function _completeTokenRebase(
        OracleReportedData memory _reportedData,
        OracleReportContext memory _reportContext,
        IPostTokenRebaseReceiver _postTokenRebaseReceiver
    ) internal returns (uint256 postTotalShares, uint256 postTotalPooledEther) {
        postTotalShares = _getTotalShares();
        postTotalPooledEther = _getTotalPooledEther();
        if (_postTokenRebaseReceiver != address(0)) {
            _postTokenRebaseReceiver.handlePostTokenRebase(
                _reportedData.reportTimestamp,
                _reportedData.timeElapsed,
                _reportContext.preTotalShares,
                _reportContext.preTotalPooledEther,
                postTotalShares,
                postTotalPooledEther,
                _reportContext.sharesMintedAsFees
            );
        }
        emit TokenRebased(
            _reportedData.reportTimestamp,
            _reportedData.timeElapsed,
            _reportContext.preTotalShares,
            _reportContext.preTotalPooledEther,
            postTotalShares,
            postTotalPooledEther,
            _reportContext.sharesMintedAsFees
        );
    }
    /**
     * @dev Load the contracts used for `handleOracleReport` internally.
     */
    function _loadOracleReportContracts() internal view returns (OracleReportContracts memory ret) {
        (
            ret.accountingOracle,
            ret.elRewardsVault,
            ret.oracleReportSanityChecker,
            ret.burner,
            ret.withdrawalQueue,
            ret.withdrawalVault,
            ret.postTokenRebaseReceiver
        ) = getLidoLocator().oracleReportComponentsForLido();
    }
    function _stakingRouter() internal view returns (IStakingRouter) {
        return IStakingRouter(getLidoLocator().stakingRouter());
    }
    function _withdrawalQueue() internal view returns (IWithdrawalQueue) {
        return IWithdrawalQueue(getLidoLocator().withdrawalQueue());
    }
    function _treasury() internal view returns (address) {
        return getLidoLocator().treasury();
    }
    /**
     * @notice Mints shares on behalf of 0xdead address,
     * the shares amount is equal to the contract's balance.     *
     *
     * Allows to get rid of zero checks for `totalShares` and `totalPooledEther`
     * and overcome corner cases.
     *
     * NB: reverts if the current contract's balance is zero.
     *
     * @dev must be invoked before using the token
     */
    function _bootstrapInitialHolder() internal {
        uint256 balance = address(this).balance;
        assert(balance != 0);
        if (_getTotalShares() == 0) {
            // if protocol is empty bootstrap it with the contract's balance
            // address(0xdead) is a holder for initial shares
            _setBufferedEther(balance);
            // emitting `Submitted` before Transfer events to preserver events order in tx
            emit Submitted(INITIAL_TOKEN_HOLDER, balance, 0);
            _mintInitialShares(balance);
        }
    }
}
// SPDX-FileCopyrightText: 2023 Lido <info@lido.fi>
// SPDX-License-Identifier: GPL-3.0
/* See contracts/COMPILERS.md */
pragma solidity 0.4.24;
import "openzeppelin-solidity/contracts/token/ERC20/IERC20.sol";
import "@aragon/os/contracts/common/UnstructuredStorage.sol";
import "@aragon/os/contracts/lib/math/SafeMath.sol";
import "./utils/Pausable.sol";
/**
 * @title Interest-bearing ERC20-like token for Lido Liquid Stacking protocol.
 *
 * This contract is abstract. To make the contract deployable override the
 * `_getTotalPooledEther` function. `Lido.sol` contract inherits StETH and defines
 * the `_getTotalPooledEther` function.
 *
 * StETH balances are dynamic and represent the holder's share in the total amount
 * of Ether controlled by the protocol. Account shares aren't normalized, so the
 * contract also stores the sum of all shares to calculate each account's token balance
 * which equals to:
 *
 *   shares[account] * _getTotalPooledEther() / _getTotalShares()
 *
 * For example, assume that we have:
 *
 *   _getTotalPooledEther() -> 10 ETH
 *   sharesOf(user1) -> 100
 *   sharesOf(user2) -> 400
 *
 * Therefore:
 *
 *   balanceOf(user1) -> 2 tokens which corresponds 2 ETH
 *   balanceOf(user2) -> 8 tokens which corresponds 8 ETH
 *
 * Since balances of all token holders change when the amount of total pooled Ether
 * changes, this token cannot fully implement ERC20 standard: it only emits `Transfer`
 * events upon explicit transfer between holders. In contrast, when total amount of
 * pooled Ether increases, no `Transfer` events are generated: doing so would require
 * emitting an event for each token holder and thus running an unbounded loop.
 *
 * The token inherits from `Pausable` and uses `whenNotStopped` modifier for methods
 * which change `shares` or `allowances`. `_stop` and `_resume` functions are overridden
 * in `Lido.sol` and might be called by an account with the `PAUSE_ROLE` assigned by the
 * DAO. This is useful for emergency scenarios, e.g. a protocol bug, where one might want
 * to freeze all token transfers and approvals until the emergency is resolved.
 */
contract StETH is IERC20, Pausable {
    using SafeMath for uint256;
    using UnstructuredStorage for bytes32;
    address constant internal INITIAL_TOKEN_HOLDER = 0xdead;
    uint256 constant internal INFINITE_ALLOWANCE = ~uint256(0);
    /**
     * @dev StETH balances are dynamic and are calculated based on the accounts' shares
     * and the total amount of Ether controlled by the protocol. Account shares aren't
     * normalized, so the contract also stores the sum of all shares to calculate
     * each account's token balance which equals to:
     *
     *   shares[account] * _getTotalPooledEther() / _getTotalShares()
    */
    mapping (address => uint256) private shares;
    /**
     * @dev Allowances are nominated in tokens, not token shares.
     */
    mapping (address => mapping (address => uint256)) private allowances;
    /**
     * @dev Storage position used for holding the total amount of shares in existence.
     *
     * The Lido protocol is built on top of Aragon and uses the Unstructured Storage pattern
     * for value types:
     *
     * https://blog.openzeppelin.com/upgradeability-using-unstructured-storage
     * https://blog.8bitzen.com/posts/20-02-2020-understanding-how-solidity-upgradeable-unstructured-proxies-work
     *
     * For reference types, conventional storage variables are used since it's non-trivial
     * and error-prone to implement reference-type unstructured storage using Solidity v0.4;
     * see https://github.com/lidofinance/lido-dao/issues/181#issuecomment-736098834
     *
     * keccak256("lido.StETH.totalShares")
     */
    bytes32 internal constant TOTAL_SHARES_POSITION =
        0xe3b4b636e601189b5f4c6742edf2538ac12bb61ed03e6da26949d69838fa447e;
    /**
      * @notice An executed shares transfer from `sender` to `recipient`.
      *
      * @dev emitted in pair with an ERC20-defined `Transfer` event.
      */
    event TransferShares(
        address indexed from,
        address indexed to,
        uint256 sharesValue
    );
    /**
     * @notice An executed `burnShares` request
     *
     * @dev Reports simultaneously burnt shares amount
     * and corresponding stETH amount.
     * The stETH amount is calculated twice: before and after the burning incurred rebase.
     *
     * @param account holder of the burnt shares
     * @param preRebaseTokenAmount amount of stETH the burnt shares corresponded to before the burn
     * @param postRebaseTokenAmount amount of stETH the burnt shares corresponded to after the burn
     * @param sharesAmount amount of burnt shares
     */
    event SharesBurnt(
        address indexed account,
        uint256 preRebaseTokenAmount,
        uint256 postRebaseTokenAmount,
        uint256 sharesAmount
    );
    /**
     * @return the name of the token.
     */
    function name() external pure returns (string) {
        return "Liquid staked Ether 2.0";
    }
    /**
     * @return the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() external pure returns (string) {
        return "stETH";
    }
    /**
     * @return the number of decimals for getting user representation of a token amount.
     */
    function decimals() external pure returns (uint8) {
        return 18;
    }
    /**
     * @return the amount of tokens in existence.
     *
     * @dev Always equals to `_getTotalPooledEther()` since token amount
     * is pegged to the total amount of Ether controlled by the protocol.
     */
    function totalSupply() external view returns (uint256) {
        return _getTotalPooledEther();
    }
    /**
     * @return the entire amount of Ether controlled by the protocol.
     *
     * @dev The sum of all ETH balances in the protocol, equals to the total supply of stETH.
     */
    function getTotalPooledEther() external view returns (uint256) {
        return _getTotalPooledEther();
    }
    /**
     * @return the amount of tokens owned by the `_account`.
     *
     * @dev Balances are dynamic and equal the `_account`'s share in the amount of the
     * total Ether controlled by the protocol. See `sharesOf`.
     */
    function balanceOf(address _account) external view returns (uint256) {
        return getPooledEthByShares(_sharesOf(_account));
    }
    /**
     * @notice Moves `_amount` tokens from the caller's account to the `_recipient` account.
     *
     * @return a boolean value indicating whether the operation succeeded.
     * Emits a `Transfer` event.
     * Emits a `TransferShares` event.
     *
     * Requirements:
     *
     * - `_recipient` cannot be the zero address.
     * - the caller must have a balance of at least `_amount`.
     * - the contract must not be paused.
     *
     * @dev The `_amount` argument is the amount of tokens, not shares.
     */
    function transfer(address _recipient, uint256 _amount) external returns (bool) {
        _transfer(msg.sender, _recipient, _amount);
        return true;
    }
    /**
     * @return the remaining number of tokens that `_spender` is allowed to spend
     * on behalf of `_owner` through `transferFrom`. This is zero by default.
     *
     * @dev This value changes when `approve` or `transferFrom` is called.
     */
    function allowance(address _owner, address _spender) external view returns (uint256) {
        return allowances[_owner][_spender];
    }
    /**
     * @notice Sets `_amount` as the allowance of `_spender` over the caller's tokens.
     *
     * @return a boolean value indicating whether the operation succeeded.
     * Emits an `Approval` event.
     *
     * Requirements:
     *
     * - `_spender` cannot be the zero address.
     *
     * @dev The `_amount` argument is the amount of tokens, not shares.
     */
    function approve(address _spender, uint256 _amount) external returns (bool) {
        _approve(msg.sender, _spender, _amount);
        return true;
    }
    /**
     * @notice Moves `_amount` tokens from `_sender` to `_recipient` using the
     * allowance mechanism. `_amount` is then deducted from the caller's
     * allowance.
     *
     * @return a boolean value indicating whether the operation succeeded.
     *
     * Emits a `Transfer` event.
     * Emits a `TransferShares` event.
     * Emits an `Approval` event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `_sender` and `_recipient` cannot be the zero addresses.
     * - `_sender` must have a balance of at least `_amount`.
     * - the caller must have allowance for `_sender`'s tokens of at least `_amount`.
     * - the contract must not be paused.
     *
     * @dev The `_amount` argument is the amount of tokens, not shares.
     */
    function transferFrom(address _sender, address _recipient, uint256 _amount) external returns (bool) {
        _spendAllowance(_sender, msg.sender, _amount);
        _transfer(_sender, _recipient, _amount);
        return true;
    }
    /**
     * @notice Atomically increases the allowance granted to `_spender` by the caller by `_addedValue`.
     *
     * This is an alternative to `approve` that can be used as a mitigation for
     * problems described in:
     * https://github.com/OpenZeppelin/openzeppelin-contracts/blob/b709eae01d1da91902d06ace340df6b324e6f049/contracts/token/ERC20/IERC20.sol#L57
     * Emits an `Approval` event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `_spender` cannot be the the zero address.
     */
    function increaseAllowance(address _spender, uint256 _addedValue) external returns (bool) {
        _approve(msg.sender, _spender, allowances[msg.sender][_spender].add(_addedValue));
        return true;
    }
    /**
     * @notice Atomically decreases the allowance granted to `_spender` by the caller by `_subtractedValue`.
     *
     * This is an alternative to `approve` that can be used as a mitigation for
     * problems described in:
     * https://github.com/OpenZeppelin/openzeppelin-contracts/blob/b709eae01d1da91902d06ace340df6b324e6f049/contracts/token/ERC20/IERC20.sol#L57
     * Emits an `Approval` event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `_spender` cannot be the zero address.
     * - `_spender` must have allowance for the caller of at least `_subtractedValue`.
     */
    function decreaseAllowance(address _spender, uint256 _subtractedValue) external returns (bool) {
        uint256 currentAllowance = allowances[msg.sender][_spender];
        require(currentAllowance >= _subtractedValue, "ALLOWANCE_BELOW_ZERO");
        _approve(msg.sender, _spender, currentAllowance.sub(_subtractedValue));
        return true;
    }
    /**
     * @return the total amount of shares in existence.
     *
     * @dev The sum of all accounts' shares can be an arbitrary number, therefore
     * it is necessary to store it in order to calculate each account's relative share.
     */
    function getTotalShares() external view returns (uint256) {
        return _getTotalShares();
    }
    /**
     * @return the amount of shares owned by `_account`.
     */
    function sharesOf(address _account) external view returns (uint256) {
        return _sharesOf(_account);
    }
    /**
     * @return the amount of shares that corresponds to `_ethAmount` protocol-controlled Ether.
     */
    function getSharesByPooledEth(uint256 _ethAmount) public view returns (uint256) {
        return _ethAmount
            .mul(_getTotalShares())
            .div(_getTotalPooledEther());
    }
    /**
     * @return the amount of Ether that corresponds to `_sharesAmount` token shares.
     */
    function getPooledEthByShares(uint256 _sharesAmount) public view returns (uint256) {
        return _sharesAmount
            .mul(_getTotalPooledEther())
            .div(_getTotalShares());
    }
    /**
     * @notice Moves `_sharesAmount` token shares from the caller's account to the `_recipient` account.
     *
     * @return amount of transferred tokens.
     * Emits a `TransferShares` event.
     * Emits a `Transfer` event.
     *
     * Requirements:
     *
     * - `_recipient` cannot be the zero address.
     * - the caller must have at least `_sharesAmount` shares.
     * - the contract must not be paused.
     *
     * @dev The `_sharesAmount` argument is the amount of shares, not tokens.
     */
    function transferShares(address _recipient, uint256 _sharesAmount) external returns (uint256) {
        _transferShares(msg.sender, _recipient, _sharesAmount);
        uint256 tokensAmount = getPooledEthByShares(_sharesAmount);
        _emitTransferEvents(msg.sender, _recipient, tokensAmount, _sharesAmount);
        return tokensAmount;
    }
    /**
     * @notice Moves `_sharesAmount` token shares from the `_sender` account to the `_recipient` account.
     *
     * @return amount of transferred tokens.
     * Emits a `TransferShares` event.
     * Emits a `Transfer` event.
     *
     * Requirements:
     *
     * - `_sender` and `_recipient` cannot be the zero addresses.
     * - `_sender` must have at least `_sharesAmount` shares.
     * - the caller must have allowance for `_sender`'s tokens of at least `getPooledEthByShares(_sharesAmount)`.
     * - the contract must not be paused.
     *
     * @dev The `_sharesAmount` argument is the amount of shares, not tokens.
     */
    function transferSharesFrom(
        address _sender, address _recipient, uint256 _sharesAmount
    ) external returns (uint256) {
        uint256 tokensAmount = getPooledEthByShares(_sharesAmount);
        _spendAllowance(_sender, msg.sender, tokensAmount);
        _transferShares(_sender, _recipient, _sharesAmount);
        _emitTransferEvents(_sender, _recipient, tokensAmount, _sharesAmount);
        return tokensAmount;
    }
    /**
     * @return the total amount (in wei) of Ether controlled by the protocol.
     * @dev This is used for calculating tokens from shares and vice versa.
     * @dev This function is required to be implemented in a derived contract.
     */
    function _getTotalPooledEther() internal view returns (uint256);
    /**
     * @notice Moves `_amount` tokens from `_sender` to `_recipient`.
     * Emits a `Transfer` event.
     * Emits a `TransferShares` event.
     */
    function _transfer(address _sender, address _recipient, uint256 _amount) internal {
        uint256 _sharesToTransfer = getSharesByPooledEth(_amount);
        _transferShares(_sender, _recipient, _sharesToTransfer);
        _emitTransferEvents(_sender, _recipient, _amount, _sharesToTransfer);
    }
    /**
     * @notice Sets `_amount` as the allowance of `_spender` over the `_owner` s tokens.
     *
     * Emits an `Approval` event.
     *
     * NB: the method can be invoked even if the protocol paused.
     *
     * Requirements:
     *
     * - `_owner` cannot be the zero address.
     * - `_spender` cannot be the zero address.
     */
    function _approve(address _owner, address _spender, uint256 _amount) internal {
        require(_owner != address(0), "APPROVE_FROM_ZERO_ADDR");
        require(_spender != address(0), "APPROVE_TO_ZERO_ADDR");
        allowances[_owner][_spender] = _amount;
        emit Approval(_owner, _spender, _amount);
    }
    /**
     * @dev Updates `owner` s allowance for `spender` based on spent `amount`.
     *
     * Does not update the allowance amount in case of infinite allowance.
     * Revert if not enough allowance is available.
     *
     * Might emit an {Approval} event.
     */
    function _spendAllowance(address _owner, address _spender, uint256 _amount) internal {
        uint256 currentAllowance = allowances[_owner][_spender];
        if (currentAllowance != INFINITE_ALLOWANCE) {
            require(currentAllowance >= _amount, "ALLOWANCE_EXCEEDED");
            _approve(_owner, _spender, currentAllowance - _amount);
        }
    }
    /**
     * @return the total amount of shares in existence.
     */
    function _getTotalShares() internal view returns (uint256) {
        return TOTAL_SHARES_POSITION.getStorageUint256();
    }
    /**
     * @return the amount of shares owned by `_account`.
     */
    function _sharesOf(address _account) internal view returns (uint256) {
        return shares[_account];
    }
    /**
     * @notice Moves `_sharesAmount` shares from `_sender` to `_recipient`.
     *
     * Requirements:
     *
     * - `_sender` cannot be the zero address.
     * - `_recipient` cannot be the zero address or the `stETH` token contract itself
     * - `_sender` must hold at least `_sharesAmount` shares.
     * - the contract must not be paused.
     */
    function _transferShares(address _sender, address _recipient, uint256 _sharesAmount) internal {
        require(_sender != address(0), "TRANSFER_FROM_ZERO_ADDR");
        require(_recipient != address(0), "TRANSFER_TO_ZERO_ADDR");
        require(_recipient != address(this), "TRANSFER_TO_STETH_CONTRACT");
        _whenNotStopped();
        uint256 currentSenderShares = shares[_sender];
        require(_sharesAmount <= currentSenderShares, "BALANCE_EXCEEDED");
        shares[_sender] = currentSenderShares.sub(_sharesAmount);
        shares[_recipient] = shares[_recipient].add(_sharesAmount);
    }
    /**
     * @notice Creates `_sharesAmount` shares and assigns them to `_recipient`, increasing the total amount of shares.
     * @dev This doesn't increase the token total supply.
     *
     * NB: The method doesn't check protocol pause relying on the external enforcement.
     *
     * Requirements:
     *
     * - `_recipient` cannot be the zero address.
     * - the contract must not be paused.
     */
    function _mintShares(address _recipient, uint256 _sharesAmount) internal returns (uint256 newTotalShares) {
        require(_recipient != address(0), "MINT_TO_ZERO_ADDR");
        newTotalShares = _getTotalShares().add(_sharesAmount);
        TOTAL_SHARES_POSITION.setStorageUint256(newTotalShares);
        shares[_recipient] = shares[_recipient].add(_sharesAmount);
        // Notice: we're not emitting a Transfer event from the zero address here since shares mint
        // works by taking the amount of tokens corresponding to the minted shares from all other
        // token holders, proportionally to their share. The total supply of the token doesn't change
        // as the result. This is equivalent to performing a send from each other token holder's
        // address to `address`, but we cannot reflect this as it would require sending an unbounded
        // number of events.
    }
    /**
     * @notice Destroys `_sharesAmount` shares from `_account`'s holdings, decreasing the total amount of shares.
     * @dev This doesn't decrease the token total supply.
     *
     * Requirements:
     *
     * - `_account` cannot be the zero address.
     * - `_account` must hold at least `_sharesAmount` shares.
     * - the contract must not be paused.
     */
    function _burnShares(address _account, uint256 _sharesAmount) internal returns (uint256 newTotalShares) {
        require(_account != address(0), "BURN_FROM_ZERO_ADDR");
        uint256 accountShares = shares[_account];
        require(_sharesAmount <= accountShares, "BALANCE_EXCEEDED");
        uint256 preRebaseTokenAmount = getPooledEthByShares(_sharesAmount);
        newTotalShares = _getTotalShares().sub(_sharesAmount);
        TOTAL_SHARES_POSITION.setStorageUint256(newTotalShares);
        shares[_account] = accountShares.sub(_sharesAmount);
        uint256 postRebaseTokenAmount = getPooledEthByShares(_sharesAmount);
        emit SharesBurnt(_account, preRebaseTokenAmount, postRebaseTokenAmount, _sharesAmount);
        // Notice: we're not emitting a Transfer event to the zero address here since shares burn
        // works by redistributing the amount of tokens corresponding to the burned shares between
        // all other token holders. The total supply of the token doesn't change as the result.
        // This is equivalent to performing a send from `address` to each other token holder address,
        // but we cannot reflect this as it would require sending an unbounded number of events.
        // We're emitting `SharesBurnt` event to provide an explicit rebase log record nonetheless.
    }
    /**
     * @dev Emits {Transfer} and {TransferShares} events
     */
    function _emitTransferEvents(address _from, address _to, uint _tokenAmount, uint256 _sharesAmount) internal {
        emit Transfer(_from, _to, _tokenAmount);
        emit TransferShares(_from, _to, _sharesAmount);
    }
    /**
     * @dev Emits {Transfer} and {TransferShares} events where `from` is 0 address. Indicates mint events.
     */
    function _emitTransferAfterMintingShares(address _to, uint256 _sharesAmount) internal {
        _emitTransferEvents(address(0), _to, getPooledEthByShares(_sharesAmount), _sharesAmount);
    }
    /**
     * @dev Mints shares to INITIAL_TOKEN_HOLDER
     */
    function _mintInitialShares(uint256 _sharesAmount) internal {
        _mintShares(INITIAL_TOKEN_HOLDER, _sharesAmount);
        _emitTransferAfterMintingShares(INITIAL_TOKEN_HOLDER, _sharesAmount);
    }
}
// SPDX-FileCopyrightText: 2023 OpenZeppelin, Lido <info@lido.fi>
// SPDX-License-Identifier: GPL-3.0
/* See contracts/COMPILERS.md */
pragma solidity 0.4.24;
import {UnstructuredStorage} from "@aragon/os/contracts/common/UnstructuredStorage.sol";
import {SignatureUtils} from "../common/lib/SignatureUtils.sol";
import {IEIP712StETH} from "../common/interfaces/IEIP712StETH.sol";
import {StETH} from "./StETH.sol";
/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 */
interface IERC2612 {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     */
    function permit(
        address owner, address spender, uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s
    ) external;
    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);
    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}
contract StETHPermit is IERC2612, StETH {
    using UnstructuredStorage for bytes32;
    /**
     * @dev Service event for initialization
     */
    event EIP712StETHInitialized(address eip712StETH);
    /**
     * @dev Nonces for ERC-2612 (Permit)
     */
    mapping(address => uint256) internal noncesByAddress;
    /**
     * @dev Storage position used for the EIP712 message utils contract
     *
     * keccak256("lido.StETHPermit.eip712StETH")
     */
    bytes32 internal constant EIP712_STETH_POSITION =
        0x42b2d95e1ce15ce63bf9a8d9f6312cf44b23415c977ffa3b884333422af8941c;
    /**
     * @dev Typehash constant for ERC-2612 (Permit)
     *
     * keccak256("Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)")
     */
    bytes32 internal constant PERMIT_TYPEHASH =
        0x6e71edae12b1b97f4d1f60370fef10105fa2faae0126114a169c64845d6126c9;
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     */
    function permit(
        address _owner, address _spender, uint256 _value, uint256 _deadline, uint8 _v, bytes32 _r, bytes32 _s
    ) external {
        require(block.timestamp <= _deadline, "DEADLINE_EXPIRED");
        bytes32 structHash = keccak256(
            abi.encode(PERMIT_TYPEHASH, _owner, _spender, _value, _useNonce(_owner), _deadline)
        );
        bytes32 hash = IEIP712StETH(getEIP712StETH()).hashTypedDataV4(address(this), structHash);
        require(SignatureUtils.isValidSignature(_owner, hash, _v, _r, _s), "INVALID_SIGNATURE");
        _approve(_owner, _spender, _value);
    }
    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256) {
        return noncesByAddress[owner];
    }
    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32) {
        return IEIP712StETH(getEIP712StETH()).domainSeparatorV4(address(this));
    }
    /**
     * @dev returns the fields and values that describe the domain separator used by this contract for EIP-712
     * signature.
     *
     * NB: compairing to the full-fledged ERC-5267 version:
     * - `salt` and `extensions` are unused
     * - `flags` is hex"0f" or 01111b
     *
     * @dev using shortened returns to reduce a bytecode size
     */
    function eip712Domain() external view returns (
        string memory name,
        string memory version,
        uint256 chainId,
        address verifyingContract
    ) {
        return IEIP712StETH(getEIP712StETH()).eip712Domain(address(this));
    }
    /**
     * @dev "Consume a nonce": return the current value and increment.
     */
    function _useNonce(address _owner) internal returns (uint256 current) {
        current = noncesByAddress[_owner];
        noncesByAddress[_owner] = current.add(1);
    }
    /**
     * @dev Initialize EIP712 message utils contract for stETH
     */
    function _initializeEIP712StETH(address _eip712StETH) internal {
        require(_eip712StETH != address(0), "ZERO_EIP712STETH");
        require(getEIP712StETH() == address(0), "EIP712STETH_ALREADY_SET");
        EIP712_STETH_POSITION.setStorageAddress(_eip712StETH);
        emit EIP712StETHInitialized(_eip712StETH);
    }
    /**
     * @dev Get EIP712 message utils contract
     */
    function getEIP712StETH() public view returns (address) {
        return EIP712_STETH_POSITION.getStorageAddress();
    }
}
// SPDX-FileCopyrightText: 2023 Lido <info@lido.fi>
// SPDX-License-Identifier: GPL-3.0
pragma solidity 0.4.24;
import "@aragon/os/contracts/common/UnstructuredStorage.sol";
contract Pausable {
    using UnstructuredStorage for bytes32;
    event Stopped();
    event Resumed();
    // keccak256("lido.Pausable.activeFlag")
    bytes32 internal constant ACTIVE_FLAG_POSITION =
        0x644132c4ddd5bb6f0655d5fe2870dcec7870e6be4758890f366b83441f9fdece;
    function _whenNotStopped() internal view {
        require(ACTIVE_FLAG_POSITION.getStorageBool(), "CONTRACT_IS_STOPPED");
    }
    function _whenStopped() internal view {
        require(!ACTIVE_FLAG_POSITION.getStorageBool(), "CONTRACT_IS_ACTIVE");
    }
    function isStopped() public view returns (bool) {
        return !ACTIVE_FLAG_POSITION.getStorageBool();
    }
    function _stop() internal {
        _whenNotStopped();
        ACTIVE_FLAG_POSITION.setStorageBool(false);
        emit Stopped();
    }
    function _resume() internal {
        _whenStopped();
        ACTIVE_FLAG_POSITION.setStorageBool(true);
        emit Resumed();
    }
}
// SPDX-FileCopyrightText: 2023 Lido <info@lido.fi>
// SPDX-License-Identifier: GPL-3.0
pragma solidity 0.4.24;
import "@aragon/os/contracts/common/UnstructuredStorage.sol";
/**
 * @title Adapted code of /contracts/0.8.9/utils/Versioned.sol
 *
 * This contract contains only core part of original Versioned.sol
 * to reduce contract size
 */
contract Versioned {
    using UnstructuredStorage for bytes32;
    event ContractVersionSet(uint256 version);
    /// @dev Storage slot: uint256 version
    /// Version of the initialized contract storage.
    /// The version stored in CONTRACT_VERSION_POSITION equals to:
    /// - 0 right after the deployment, before an initializer is invoked (and only at that moment);
    /// - N after calling initialize(), where N is the initially deployed contract version;
    /// - N after upgrading contract by calling finalizeUpgrade_vN().
    bytes32 internal constant CONTRACT_VERSION_POSITION =
        0x4dd0f6662ba1d6b081f08b350f5e9a6a7b15cf586926ba66f753594928fa64a6; // keccak256("lido.Versioned.contractVersion");
    uint256 internal constant PETRIFIED_VERSION_MARK = uint256(-1);
    constructor() public {
        // lock version in the implementation's storage to prevent initialization
        CONTRACT_VERSION_POSITION.setStorageUint256(PETRIFIED_VERSION_MARK);
    }
    /// @notice Returns the current contract version.
    function getContractVersion() public view returns (uint256) {
        return CONTRACT_VERSION_POSITION.getStorageUint256();
    }
    function _checkContractVersion(uint256 version) internal view {
        require(version == getContractVersion(), "UNEXPECTED_CONTRACT_VERSION");
    }
    function _setContractVersion(uint256 version) internal {
        CONTRACT_VERSION_POSITION.setStorageUint256(version);
        emit ContractVersionSet(version);
    }
}
// SPDX-FileCopyrightText: 2023 Lido <info@lido.fi>
// SPDX-License-Identifier: GPL-3.0
// See contracts/COMPILERS.md
// solhint-disable-next-line
pragma solidity >=0.4.24 <0.9.0;
interface IBurner {
    /**
     * Commit cover/non-cover burning requests and logs cover/non-cover shares amount just burnt.
     *
     * NB: The real burn enactment to be invoked after the call (via internal Lido._burnShares())
     */
    function commitSharesToBurn(uint256 _stETHSharesToBurn) external;
    /**
     * Request burn shares
     */
    function requestBurnShares(address _from, uint256 _sharesAmount) external;
    /**
      * Returns the current amount of shares locked on the contract to be burnt.
      */
    function getSharesRequestedToBurn() external view returns (uint256 coverShares, uint256 nonCoverShares);
    /**
      * Returns the total cover shares ever burnt.
      */
    function getCoverSharesBurnt() external view returns (uint256);
    /**
      * Returns the total non-cover shares ever burnt.
      */
    function getNonCoverSharesBurnt() external view returns (uint256);
}
// SPDX-FileCopyrightText: 2023 OpenZeppelin, Lido <info@lido.fi>
// SPDX-License-Identifier: GPL-3.0
// See contracts/COMPILERS.md
// solhint-disable-next-line
pragma solidity >=0.4.24 <0.9.0;
/**
 * @dev Helper interface of EIP712 StETH-dedicated helper.
 *
 * Has an access to the CHAIN_ID opcode and relies on immutables internally
 * Both are unavailable for Solidity 0.4.24.
 */
interface IEIP712StETH {
    /**
     * @dev Returns the domain separator for the current chain.
     */
    function domainSeparatorV4(address _stETH) external view returns (bytes32);
    /**
     * @dev Given an already https://eips.ethereum.org/EIPS/eip-712#definition-of-hashstruct[hashed struct], this
     * function returns the hash of the fully encoded EIP712 message for this domain.
     *
     * This hash can be used together with {ECDSA-recover} to obtain the signer of a message. For example:
     *
     * ```solidity
     * bytes32 digest = hashTypedDataV4(keccak256(abi.encode(
     *     keccak256("Mail(address to,string contents)"),
     *     mailTo,
     *     keccak256(bytes(mailContents))
     * )));
     * address signer = ECDSA.recover(digest, signature);
     * ```
     */
    function hashTypedDataV4(address _stETH, bytes32 _structHash) external view returns (bytes32);
    /**
     * @dev returns the fields and values that describe the domain separator
     * used by stETH for EIP-712 signature.
     */
    function eip712Domain(address _stETH) external view returns (
        string memory name,
        string memory version,
        uint256 chainId,
        address verifyingContract
    );
}
// SPDX-FileCopyrightText: 2023 Lido <info@lido.fi>
// SPDX-License-Identifier: GPL-3.0
// See contracts/COMPILERS.md
// solhint-disable-next-line
pragma solidity >=0.4.24 <0.9.0;
interface ILidoLocator {
    function accountingOracle() external view returns(address);
    function depositSecurityModule() external view returns(address);
    function elRewardsVault() external view returns(address);
    function legacyOracle() external view returns(address);
    function lido() external view returns(address);
    function oracleReportSanityChecker() external view returns(address);
    function burner() external view returns(address);
    function stakingRouter() external view returns(address);
    function treasury() external view returns(address);
    function validatorsExitBusOracle() external view returns(address);
    function withdrawalQueue() external view returns(address);
    function withdrawalVault() external view returns(address);
    function postTokenRebaseReceiver() external view returns(address);
    function oracleDaemonConfig() external view returns(address);
    function coreComponents() external view returns(
        address elRewardsVault,
        address oracleReportSanityChecker,
        address stakingRouter,
        address treasury,
        address withdrawalQueue,
        address withdrawalVault
    );
    function oracleReportComponentsForLido() external view returns(
        address accountingOracle,
        address elRewardsVault,
        address oracleReportSanityChecker,
        address burner,
        address withdrawalQueue,
        address withdrawalVault,
        address postTokenRebaseReceiver
    );
}
// SPDX-License-Identifier: MIT
// Extracted from:
// https://github.com/OpenZeppelin/openzeppelin-contracts/blob/v3.4.0/contracts/cryptography/ECDSA.sol#L53
// https://github.com/OpenZeppelin/openzeppelin-contracts/blob/541e821/contracts/utils/cryptography/ECDSA.sol#L112
/* See contracts/COMPILERS.md */
// solhint-disable-next-line
pragma solidity >=0.4.24 <0.9.0;
library ECDSA {
    /**
     * @dev Returns the address that signed a hashed message (`hash`).
     * This address can then be used for verification purposes.
     * Receives the `v`, `r` and `s` signature fields separately.
     *
     * The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data.
     */
    function recover(bytes32 hash, uint8 v, bytes32 r, bytes32 s) internal pure returns (address)
    {
        // EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
        // unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
        // the valid range for s in (281): 0 < s < secp256k1n ÷ 2 + 1, and for v in (282): v ∈ {27, 28}. Most
        // signatures from current libraries generate a unique signature with an s-value in the lower half order.
        //
        // If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
        // with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
        // vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
        // these malleable signatures as well.
        require(uint256(s) <= 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0, "ECDSA: invalid signature 's' value");
        // If the signature is valid (and not malleable), return the signer address
        address signer = ecrecover(hash, v, r, s);
        require(signer != address(0), "ECDSA: invalid signature");
        return signer;
    }
    /**
     * @dev Overload of `recover` that receives the `r` and `vs` short-signature fields separately.
     * See https://eips.ethereum.org/EIPS/eip-2098[EIP-2098 short signatures]
     */
    function recover(bytes32 hash, bytes32 r, bytes32 vs) internal pure returns (address) {
        bytes32 s;
        uint8 v;
        assembly {
            s := and(vs, 0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff)
            v := add(shr(255, vs), 27)
        }
        return recover(hash, v, r, s);
    }
}
// SPDX-FileCopyrightText: 2023 Lido <info@lido.fi>
// SPDX-License-Identifier: MIT
// Copied from: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/0457042d93d9dfd760dbaa06a4d2f1216fdbe297/contracts/utils/math/Math.sol
// See contracts/COMPILERS.md
// solhint-disable-next-line
pragma solidity >=0.4.24 <0.9.0;
library Math256 {
    /// @dev Returns the largest of two numbers.
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a > b ? a : b;
    }
    /// @dev Returns the smallest of two numbers.
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }
    /// @dev Returns the largest of two numbers.
    function max(int256 a, int256 b) internal pure returns (int256) {
        return a > b ? a : b;
    }
    /// @dev Returns the smallest of two numbers.
    function min(int256 a, int256 b) internal pure returns (int256) {
        return a < b ? a : b;
    }
    /// @dev Returns the ceiling of the division of two numbers.
    ///
    /// This differs from standard division with `/` in that it rounds up instead
    /// of rounding down.
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }
    /// @dev Returns absolute difference of two numbers.
    function absDiff(uint256 a, uint256 b) internal pure returns (uint256) {
        return a > b ? a - b : b - a;
    }
}
// SPDX-FileCopyrightText: 2023 Lido <info@lido.fi>
// SPDX-License-Identifier: MIT
/* See contracts/COMPILERS.md */
// solhint-disable-next-line lido/fixed-compiler-version
pragma solidity >=0.4.24 <0.9.0;
import {ECDSA} from "./ECDSA.sol";
library SignatureUtils {
    /**
     * @dev The selector of the ERC1271's `isValidSignature(bytes32 hash, bytes signature)` function,
     * serving at the same time as the magic value that the function should return upon success.
     *
     * See https://eips.ethereum.org/EIPS/eip-1271.
     *
     * bytes4(keccak256("isValidSignature(bytes32,bytes)")
     */
    bytes4 internal constant ERC1271_IS_VALID_SIGNATURE_SELECTOR = 0x1626ba7e;
    /**
     * @dev Checks signature validity.
     *
     * If the signer address doesn't contain any code, assumes that the address is externally owned
     * and the signature is a ECDSA signature generated using its private key. Otherwise, issues a
     * static call to the signer address to check the signature validity using the ERC-1271 standard.
     */
    function isValidSignature(
        address signer,
        bytes32 msgHash,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal view returns (bool) {
        if (_hasCode(signer)) {
            bytes memory sig = abi.encodePacked(r, s, v);
            // Solidity <0.5 generates a regular CALL instruction even if the function being called
            // is marked as `view`, and the only way to perform a STATICCALL is to use assembly
            bytes memory data = abi.encodeWithSelector(ERC1271_IS_VALID_SIGNATURE_SELECTOR, msgHash, sig);
            bytes32 retval;
            /// @solidity memory-safe-assembly
            assembly {
                // allocate memory for storing the return value
                let outDataOffset := mload(0x40)
                mstore(0x40, add(outDataOffset, 32))
                // issue a static call and load the result if the call succeeded
                let success := staticcall(gas(), signer, add(data, 32), mload(data), outDataOffset, 32)
                if and(eq(success, 1), eq(returndatasize(), 32)) {
                    retval := mload(outDataOffset)
                }
            }
            return retval == bytes32(ERC1271_IS_VALID_SIGNATURE_SELECTOR);
        } else {
            return ECDSA.recover(msgHash, v, r, s) == signer;
        }
    }
    function _hasCode(address addr) internal view returns (bool) {
        uint256 size;
        /// @solidity memory-safe-assembly
        assembly { size := extcodesize(addr) }
        return size > 0;
    }
}
pragma solidity ^0.4.24;
/**
 * @title ERC20 interface
 * @dev see https://github.com/ethereum/EIPs/issues/20
 */
interface IERC20 {
  function totalSupply() external view returns (uint256);
  function balanceOf(address who) external view returns (uint256);
  function allowance(address owner, address spender)
    external view returns (uint256);
  function transfer(address to, uint256 value) external returns (bool);
  function approve(address spender, uint256 value)
    external returns (bool);
  function transferFrom(address from, address to, uint256 value)
    external returns (bool);
  event Transfer(
    address indexed from,
    address indexed to,
    uint256 value
  );
  event Approval(
    address indexed owner,
    address indexed spender,
    uint256 value
  );
}