// SPDX-License-Identifier: MIT
pragma solidity ^0.7.0;
/**
 * @dev This abstract contract provides a fallback function that delegates all calls to another contract using the EVM
 * instruction `delegatecall`. We refer to the second contract as the _implementation_ behind the proxy, and it has to
 * be specified by overriding the virtual {_implementation} function.
 * 
 * Additionally, delegation to the implementation can be triggered manually through the {_fallback} function, or to a
 * different contract through the {_delegate} function.
 * 
 * The success and return data of the delegated call will be returned back to the caller of the proxy.
 */
abstract contract Proxy {
    /**
     * @dev Delegates the current call to `implementation`.
     * 
     * This function does not return to its internall call site, it will return directly to the external caller.
     */
    function _delegate(address implementation) internal {
        // solhint-disable-next-line no-inline-assembly
        assembly {
            // Copy msg.data. We take full control of memory in this inline assembly
            // block because it will not return to Solidity code. We overwrite the
            // Solidity scratch pad at memory position 0.
            calldatacopy(0, 0, calldatasize())
            // Call the implementation.
            // out and outsize are 0 because we don't know the size yet.
            let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)
            // Copy the returned data.
            returndatacopy(0, 0, returndatasize())
            switch result
            // delegatecall returns 0 on error.
            case 0 { revert(0, returndatasize()) }
            default { return(0, returndatasize()) }
        }
    }
    /**
     * @dev This is a virtual function that should be overriden so it returns the address to which the fallback function
     * and {_fallback} should delegate.
     */
    function _implementation() internal virtual view returns (address);
    /**
     * @dev Delegates the current call to the address returned by `_implementation()`.
     * 
     * This function does not return to its internall call site, it will return directly to the external caller.
     */
    function _fallback() internal {
        _beforeFallback();
        _delegate(_implementation());
    }
    /**
     * @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if no other
     * function in the contract matches the call data.
     */
    fallback () payable external {
        _fallback();
    }
    /**
     * @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if call data
     * is empty.
     */
    receive () payable external {
        _fallback();
    }
    /**
     * @dev Hook that is called before falling back to the implementation. Can happen as part of a manual `_fallback`
     * call, or as part of the Solidity `fallback` or `receive` functions.
     * 
     * If overriden should call `super._beforeFallback()`.
     */
    function _beforeFallback() internal virtual {
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.7.0;
import "./Proxy.sol";
import "../utils/Address.sol";
/**
 * @dev This contract implements an upgradeable proxy. It is upgradeable because calls are delegated to an
 * implementation address that can be changed. This address is stored in storage in the location specified by
 * https://eips.ethereum.org/EIPS/eip-1967[EIP1967], so that it doesn't conflict with the storage layout of the
 * implementation behind the proxy.
 * 
 * Upgradeability is only provided internally through {_upgradeTo}. For an externally upgradeable proxy see
 * {TransparentUpgradeableProxy}.
 */
contract UpgradeableProxy is Proxy {
    /**
     * @dev Initializes the upgradeable proxy with an initial implementation specified by `_logic`.
     * 
     * If `_data` is nonempty, it's used as data in a delegate call to `_logic`. This will typically be an encoded
     * function call, and allows initializating the storage of the proxy like a Solidity constructor.
     */
    constructor(address _logic, bytes memory _data) payable {
        assert(_IMPLEMENTATION_SLOT == bytes32(uint256(keccak256("eip1967.proxy.implementation")) - 1));
        _setImplementation(_logic);
        if(_data.length > 0) {
            // solhint-disable-next-line avoid-low-level-calls
            (bool success,) = _logic.delegatecall(_data);
            require(success);
        }
    }
    /**
     * @dev Emitted when the implementation is upgraded.
     */
    event Upgraded(address indexed implementation);
    /**
     * @dev Storage slot with the address of the current implementation.
     * This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1, and is
     * validated in the constructor.
     */
    bytes32 private constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
    /**
     * @dev Returns the current implementation address.
     */
    function _implementation() internal override view returns (address impl) {
        bytes32 slot = _IMPLEMENTATION_SLOT;
        // solhint-disable-next-line no-inline-assembly
        assembly {
            impl := sload(slot)
        }
    }
    /**
     * @dev Upgrades the proxy to a new implementation.
     * 
     * Emits an {Upgraded} event.
     */
    function _upgradeTo(address newImplementation) internal {
        _setImplementation(newImplementation);
        emit Upgraded(newImplementation);
    }
    /**
     * @dev Stores a new address in the EIP1967 implementation slot.
     */
    function _setImplementation(address newImplementation) private {
        require(Address.isContract(newImplementation), "UpgradeableProxy: new implementation is not a contract");
        bytes32 slot = _IMPLEMENTATION_SLOT;
        // solhint-disable-next-line no-inline-assembly
        assembly {
            sstore(slot, newImplementation)
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.7.0;
/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // According to EIP-1052, 0x0 is the value returned for not-yet created accounts
        // and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
        // for accounts without code, i.e. `keccak256('')`
        bytes32 codehash;
        bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
        // solhint-disable-next-line no-inline-assembly
        assembly { codehash := extcodehash(account) }
        return (codehash != accountHash && codehash != 0x0);
    }
    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");
        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }
    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return _functionCallWithValue(target, data, 0, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }
    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        return _functionCallWithValue(target, data, value, errorMessage);
    }
    function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
        require(isContract(target), "Address: call to non-contract");
        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly
                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.7.0;
import "../openzeppelin/proxy/UpgradeableProxy.sol";
/**
 * @dev This contract implements a proxy that is upgradeable by an admin.
 *
 * To avoid https://medium.com/nomic-labs-blog/malicious-backdoors-in-ethereum-proxies-62629adf3357[proxy selector
 * clashing], which can potentially be used in an attack, this contract uses the
 * https://blog.openzeppelin.com/the-transparent-proxy-pattern/[transparent proxy pattern]. This pattern implies two
 * things that go hand in hand:
 *
 * 1. If any account other than the admin calls the proxy, the call will be forwarded to the implementation, even if
 * that call matches one of the admin functions exposed by the proxy itself.
 * 2. If the admin calls the proxy, it can access the admin functions, but its calls will never be forwarded to the
 * implementation. If the admin tries to call a function on the implementation it will fail with an error that says
 * "admin cannot fallback to proxy target".
 *
 * These properties mean that the admin account can only be used for admin actions like upgrading the proxy or changing
 * the admin, so it's best if it's a dedicated account that is not used for anything else. This will avoid headaches due
 * to sudden errors when trying to call a function from the proxy implementation.
 *
 * Our recommendation is for the dedicated account to be an instance of the {ProxyAdmin} contract. If set up this way,
 * you should think of the `ProxyAdmin` instance as the real administrative inerface of your proxy.
 */
contract OptimizedTransparentUpgradeableProxy is UpgradeableProxy {
    address internal immutable _ADMIN;
    /**
     * @dev Initializes an upgradeable proxy managed by `_admin`, backed by the implementation at `_logic`, and
     * optionally initialized with `_data` as explained in {UpgradeableProxy-constructor}.
     */
    constructor(
        address initialLogic,
        address initialAdmin,
        bytes memory _data
    ) payable UpgradeableProxy(initialLogic, _data) {
        assert(_ADMIN_SLOT == bytes32(uint256(keccak256("eip1967.proxy.admin")) - 1));
        bytes32 slot = _ADMIN_SLOT;
        _ADMIN = initialAdmin;
        // still store it to work with EIP-1967
        // solhint-disable-next-line no-inline-assembly
        assembly {
            sstore(slot, initialAdmin)
        }
    }
    /**
     * @dev Storage slot with the admin of the contract.
     * This is the keccak-256 hash of "eip1967.proxy.admin" subtracted by 1, and is
     * validated in the constructor.
     */
    bytes32 private constant _ADMIN_SLOT = 0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103;
    /**
     * @dev Modifier used internally that will delegate the call to the implementation unless the sender is the admin.
     */
    modifier ifAdmin() {
        if (msg.sender == _admin()) {
            _;
        } else {
            _fallback();
        }
    }
    /**
     * @dev Returns the current admin.
     *
     * NOTE: Only the admin can call this function. See {ProxyAdmin-getProxyAdmin}.
     *
     * TIP: To get this value clients can read directly from the storage slot shown below (specified by EIP1967) using the
     * https://eth.wiki/json-rpc/API#eth_getstorageat[`eth_getStorageAt`] RPC call.
     * `0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103`
     */
    function admin() external ifAdmin returns (address) {
        return _admin();
    }
    /**
     * @dev Returns the current implementation.
     *
     * NOTE: Only the admin can call this function. See {ProxyAdmin-getProxyImplementation}.
     *
     * TIP: To get this value clients can read directly from the storage slot shown below (specified by EIP1967) using the
     * https://eth.wiki/json-rpc/API#eth_getstorageat[`eth_getStorageAt`] RPC call.
     * `0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc`
     */
    function implementation() external ifAdmin returns (address) {
        return _implementation();
    }
    /**
     * @dev Upgrade the implementation of the proxy.
     *
     * NOTE: Only the admin can call this function. See {ProxyAdmin-upgrade}.
     */
    function upgradeTo(address newImplementation) external ifAdmin {
        _upgradeTo(newImplementation);
    }
    /**
     * @dev Upgrade the implementation of the proxy, and then call a function from the new implementation as specified
     * by `data`, which should be an encoded function call. This is useful to initialize new storage variables in the
     * proxied contract.
     *
     * NOTE: Only the admin can call this function. See {ProxyAdmin-upgradeAndCall}.
     */
    function upgradeToAndCall(address newImplementation, bytes calldata data) external payable ifAdmin {
        _upgradeTo(newImplementation);
        // solhint-disable-next-line avoid-low-level-calls
        (bool success, ) = newImplementation.delegatecall(data);
        require(success);
    }
    /**
     * @dev Returns the current admin.
     */
    function _admin() internal view returns (address adm) {
        return _ADMIN;
    }
    /**
     * @dev Makes sure the admin cannot access the fallback function. See {Proxy-_beforeFallback}.
     */
    function _beforeFallback() internal virtual override {
        require(msg.sender != _admin(), "TransparentUpgradeableProxy: admin cannot fallback to proxy target");
        super._beforeFallback();
    }
}

{"Address.sol":{"content":"// SPDX-License-Identifier: MIT\n\npragma solidity ^0.7.0;\n\n/**\n * @dev Collection of functions related to the address type\n */\nlibrary Address {\n    /**\n     * @dev Returns true if `account` is a contract.\n     *\n     * [IMPORTANT]\n     * ====\n     * It is unsafe to assume that an address for which this function returns\n     * false is an externally-owned account (EOA) and not a contract.\n     *\n     * Among others, `isContract` will return false for the following\n     * types of addresses:\n     *\n     *  - an externally-owned account\n     *  - a contract in construction\n     *  - an address where a contract will be created\n     *  - an address where a contract lived, but was destroyed\n     * ====\n     */\n    function isContract(address account) internal view returns (bool) {\n        // This method relies on extcodesize, which returns 0 for contracts in\n        // construction, since the code is only stored at the end of the\n        // constructor execution.\n\n        uint256 size;\n        // solhint-disable-next-line no-inline-assembly\n        assembly { size := extcodesize(account) }\n        return size \u003e 0;\n    }\n\n    /**\n     * @dev Replacement for Solidity\u0027s `transfer`: sends `amount` wei to\n     * `recipient`, forwarding all available gas and reverting on errors.\n     *\n     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost\n     * of certain opcodes, possibly making contracts go over the 2300 gas limit\n     * imposed by `transfer`, making them unable to receive funds via\n     * `transfer`. {sendValue} removes this limitation.\n     *\n     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].\n     *\n     * IMPORTANT: because control is transferred to `recipient`, care must be\n     * taken to not create reentrancy vulnerabilities. Consider using\n     * {ReentrancyGuard} or the\n     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].\n     */\n    function sendValue(address payable recipient, uint256 amount) internal {\n        require(address(this).balance \u003e= amount, \"Address: insufficient balance\");\n\n        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value\n        (bool success, ) = recipient.call{ value: amount }(\"\");\n        require(success, \"Address: unable to send value, recipient may have reverted\");\n    }\n\n    /**\n     * @dev Performs a Solidity function call using a low level `call`. A\n     * plain`call` is an unsafe replacement for a function call: use this\n     * function instead.\n     *\n     * If `target` reverts with a revert reason, it is bubbled up by this\n     * function (like regular Solidity function calls).\n     *\n     * Returns the raw returned data. To convert to the expected return value,\n     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].\n     *\n     * Requirements:\n     *\n     * - `target` must be a contract.\n     * - calling `target` with `data` must not revert.\n     *\n     * _Available since v3.1._\n     */\n    function functionCall(address target, bytes memory data) internal returns (bytes memory) {\n      return functionCall(target, data, \"Address: low-level call failed\");\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with\n     * `errorMessage` as a fallback revert reason when `target` reverts.\n     *\n     * _Available since v3.1._\n     */\n    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {\n        return functionCallWithValue(target, data, 0, errorMessage);\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n     * but also transferring `value` wei to `target`.\n     *\n     * Requirements:\n     *\n     * - the calling contract must have an ETH balance of at least `value`.\n     * - the called Solidity function must be `payable`.\n     *\n     * _Available since v3.1._\n     */\n    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {\n        return functionCallWithValue(target, data, value, \"Address: low-level call with value failed\");\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but\n     * with `errorMessage` as a fallback revert reason when `target` reverts.\n     *\n     * _Available since v3.1._\n     */\n    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {\n        require(address(this).balance \u003e= value, \"Address: insufficient balance for call\");\n        require(isContract(target), \"Address: call to non-contract\");\n\n        // solhint-disable-next-line avoid-low-level-calls\n        (bool success, bytes memory returndata) = target.call{ value: value }(data);\n        return _verifyCallResult(success, returndata, errorMessage);\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n     * but performing a static call.\n     *\n     * _Available since v3.3._\n     */\n    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {\n        return functionStaticCall(target, data, \"Address: low-level static call failed\");\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],\n     * but performing a static call.\n     *\n     * _Available since v3.3._\n     */\n    function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {\n        require(isContract(target), \"Address: static call to non-contract\");\n\n        // solhint-disable-next-line avoid-low-level-calls\n        (bool success, bytes memory returndata) = target.staticcall(data);\n        return _verifyCallResult(success, returndata, errorMessage);\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n     * but performing a delegate call.\n     *\n     * _Available since v3.4._\n     */\n    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {\n        return functionDelegateCall(target, data, \"Address: low-level delegate call failed\");\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],\n     * but performing a delegate call.\n     *\n     * _Available since v3.4._\n     */\n    function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {\n        require(isContract(target), \"Address: delegate call to non-contract\");\n\n        // solhint-disable-next-line avoid-low-level-calls\n        (bool success, bytes memory returndata) = target.delegatecall(data);\n        return _verifyCallResult(success, returndata, errorMessage);\n    }\n\n    function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {\n        if (success) {\n            return returndata;\n        } else {\n            // Look for revert reason and bubble it up if present\n            if (returndata.length \u003e 0) {\n                // The easiest way to bubble the revert reason is using memory via assembly\n\n                // solhint-disable-next-line no-inline-assembly\n                assembly {\n                    let returndata_size := mload(returndata)\n                    revert(add(32, returndata), returndata_size)\n                }\n            } else {\n                revert(errorMessage);\n            }\n        }\n    }\n}\n"},"Buffer.sol":{"content":"// SPDX-License-Identifier: BUSL-1.1\n\n// https://github.com/ensdomains/buffer\n\npragma solidity ^0.7.0;\n\n/**\n * @dev A library for working with mutable byte buffers in Solidity.\n *\n * Byte buffers are mutable and expandable, and provide a variety of primitives\n * for writing to them. At any time you can fetch a bytes object containing the\n * current contents of the buffer. The bytes object should not be stored between\n * operations, as it may change due to resizing of the buffer.\n */\nlibrary Buffer {\n    /**\n     * @dev Represents a mutable buffer. Buffers have a current value (buf) and\n     *      a capacity. The capacity may be longer than the current value, in\n     *      which case it can be extended without the need to allocate more memory.\n     */\n    struct buffer {\n        bytes buf;\n        uint capacity;\n    }\n\n    /**\n     * @dev Initializes a buffer with an initial capacity.a co\n     * @param buf The buffer to initialize.\n     * @param capacity The number of bytes of space to allocate the buffer.\n     * @return The buffer, for chaining.\n     */\n    function init(buffer memory buf, uint capacity) internal pure returns (buffer memory) {\n        if (capacity % 32 != 0) {\n            capacity += 32 - (capacity % 32);\n        }\n        // Allocate space for the buffer data\n        buf.capacity = capacity;\n        assembly {\n            let ptr := mload(0x40)\n            mstore(buf, ptr)\n            mstore(ptr, 0)\n            mstore(0x40, add(32, add(ptr, capacity)))\n        }\n        return buf;\n    }\n\n\n    /**\n     * @dev Writes a byte string to a buffer. Resizes if doing so would exceed\n     *      the capacity of the buffer.\n     * @param buf The buffer to append to.\n     * @param off The start offset to write to.\n     * @param rawData The data to append.\n     * @param len The number of bytes to copy.\n     * @return The original buffer, for chaining.\n     */\n    function writeRawBytes(\n        buffer memory buf,\n        uint off,\n        bytes memory rawData,\n        uint offData,\n        uint len\n    ) internal pure returns (buffer memory) {\n        if (off + len \u003e buf.capacity) {\n            resize(buf, max(buf.capacity, len + off) * 2);\n        }\n\n        uint dest;\n        uint src;\n        assembly {\n            // Memory address of the buffer data\n            let bufptr := mload(buf)\n            // Length of existing buffer data\n            let buflen := mload(bufptr)\n            // Start address = buffer address + offset + sizeof(buffer length)\n            dest := add(add(bufptr, 32), off)\n            // Update buffer length if we\u0027re extending it\n            if gt(add(len, off), buflen) {\n                mstore(bufptr, add(len, off))\n            }\n            src := add(rawData, offData)\n        }\n\n        // Copy word-length chunks while possible\n        for (; len \u003e= 32; len -= 32) {\n            assembly {\n                mstore(dest, mload(src))\n            }\n            dest += 32;\n            src += 32;\n        }\n\n        // Copy remaining bytes\n        uint mask = 256**(32 - len) - 1;\n        assembly {\n            let srcpart := and(mload(src), not(mask))\n            let destpart := and(mload(dest), mask)\n            mstore(dest, or(destpart, srcpart))\n        }\n\n        return buf;\n    }\n\n    /**\n     * @dev Writes a byte string to a buffer. Resizes if doing so would exceed\n     *      the capacity of the buffer.\n     * @param buf The buffer to append to.\n     * @param off The start offset to write to.\n     * @param data The data to append.\n     * @param len The number of bytes to copy.\n     * @return The original buffer, for chaining.\n     */\n    function write(buffer memory buf, uint off, bytes memory data, uint len) internal pure returns (buffer memory) {\n        require(len \u003c= data.length);\n\n        if (off + len \u003e buf.capacity) {\n            resize(buf, max(buf.capacity, len + off) * 2);\n        }\n\n        uint dest;\n        uint src;\n        assembly {\n        // Memory address of the buffer data\n            let bufptr := mload(buf)\n        // Length of existing buffer data\n            let buflen := mload(bufptr)\n        // Start address = buffer address + offset + sizeof(buffer length)\n            dest := add(add(bufptr, 32), off)\n        // Update buffer length if we\u0027re extending it\n            if gt(add(len, off), buflen) {\n                mstore(bufptr, add(len, off))\n            }\n            src := add(data, 32)\n        }\n\n        // Copy word-length chunks while possible\n        for (; len \u003e= 32; len -= 32) {\n            assembly {\n                mstore(dest, mload(src))\n            }\n            dest += 32;\n            src += 32;\n        }\n\n        // Copy remaining bytes\n        uint mask = 256**(32 - len) - 1;\n        assembly {\n            let srcpart := and(mload(src), not(mask))\n            let destpart := and(mload(dest), mask)\n            mstore(dest, or(destpart, srcpart))\n        }\n\n        return buf;\n    }\n\n    function append(buffer memory buf, bytes memory data) internal pure returns (buffer memory) {\n        return write(buf, buf.buf.length, data, data.length);\n    }\n\n    function resize(buffer memory buf, uint capacity) private pure {\n        bytes memory oldbuf = buf.buf;\n        init(buf, capacity);\n        append(buf, oldbuf);\n    }\n\n    function max(uint a, uint b) private pure returns (uint) {\n        if (a \u003e b) {\n            return a;\n        }\n        return b;\n    }\n}\n"},"Context.sol":{"content":"// SPDX-License-Identifier: MIT\n\npragma solidity \u003e=0.6.0 \u003c0.8.0;\n\n/*\n * @dev Provides information about the current execution context, including the\n * sender of the transaction and its data. While these are generally available\n * via msg.sender and msg.data, they should not be accessed in such a direct\n * manner, since when dealing with GSN meta-transactions the account sending and\n * paying for execution may not be the actual sender (as far as an application\n * is concerned).\n *\n * This contract is only required for intermediate, library-like contracts.\n */\nabstract contract Context {\n    function _msgSender() internal view virtual returns (address payable) {\n        return msg.sender;\n    }\n\n    function _msgData() internal view virtual returns (bytes memory) {\n        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691\n        return msg.data;\n    }\n}\n"},"IERC20.sol":{"content":"// SPDX-License-Identifier: MIT\n\npragma solidity ^0.7.0;\n\n/**\n * @dev Interface of the ERC20 standard as defined in the EIP.\n */\ninterface IERC20 {\n    /**\n     * @dev Returns the amount of tokens in existence.\n     */\n    function totalSupply() external view returns (uint256);\n\n    /**\n     * @dev Returns the amount of tokens owned by `account`.\n     */\n    function balanceOf(address account) external view returns (uint256);\n\n    /**\n     * @dev Moves `amount` tokens from the caller\u0027s account to `recipient`.\n     *\n     * Returns a boolean value indicating whether the operation succeeded.\n     *\n     * Emits a {Transfer} event.\n     */\n    function transfer(address recipient, uint256 amount) external returns (bool);\n\n    /**\n     * @dev Returns the remaining number of tokens that `spender` will be\n     * allowed to spend on behalf of `owner` through {transferFrom}. This is\n     * zero by default.\n     *\n     * This value changes when {approve} or {transferFrom} are called.\n     */\n    function allowance(address owner, address spender) external view returns (uint256);\n\n    /**\n     * @dev Sets `amount` as the allowance of `spender` over the caller\u0027s tokens.\n     *\n     * Returns a boolean value indicating whether the operation succeeded.\n     *\n     * IMPORTANT: Beware that changing an allowance with this method brings the risk\n     * that someone may use both the old and the new allowance by unfortunate\n     * transaction ordering. One possible solution to mitigate this race\n     * condition is to first reduce the spender\u0027s allowance to 0 and set the\n     * desired value afterwards:\n     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729\n     *\n     * Emits an {Approval} event.\n     */\n    function approve(address spender, uint256 amount) external returns (bool);\n\n    /**\n     * @dev Moves `amount` tokens from `sender` to `recipient` using the\n     * allowance mechanism. `amount` is then deducted from the caller\u0027s\n     * allowance.\n     *\n     * Returns a boolean value indicating whether the operation succeeded.\n     *\n     * Emits a {Transfer} event.\n     */\n    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);\n\n    /**\n     * @dev Emitted when `value` tokens are moved from one account (`from`) to\n     * another (`to`).\n     *\n     * Note that `value` may be zero.\n     */\n    event Transfer(address indexed from, address indexed to, uint256 value);\n\n    /**\n     * @dev Emitted when the allowance of a `spender` for an `owner` is set by\n     * a call to {approve}. `value` is the new allowance.\n     */\n    event Approval(address indexed owner, address indexed spender, uint256 value);\n}\n"},"ILayerZeroEndpoint.sol":{"content":"// SPDX-License-Identifier: BUSL-1.1\n\npragma solidity \u003e=0.5.0;\n\nimport \"./ILayerZeroUserApplicationConfig.sol\";\n\ninterface ILayerZeroEndpoint is ILayerZeroUserApplicationConfig {\n    // @notice send a LayerZero message to the specified address at a LayerZero endpoint.\n    // @param _dstChainId - the destination chain identifier\n    // @param _destination - the address on destination chain (in bytes). address length/format may vary by chains\n    // @param _payload - a custom bytes payload to send to the destination contract\n    // @param _refundAddress - if the source transaction is cheaper than the amount of value passed, refund the additional amount to this address\n    // @param _zroPaymentAddress - the address of the ZRO token holder who would pay for the transaction\n    // @param _adapterParams - parameters for custom functionality. e.g. receive airdropped native gas from the relayer on destination\n    function send(uint16 _dstChainId, bytes calldata _destination, bytes calldata _payload, address payable _refundAddress, address _zroPaymentAddress, bytes calldata _adapterParams) external payable;\n\n    // @notice used by the messaging library to publish verified payload\n    // @param _srcChainId - the source chain identifier\n    // @param _srcAddress - the source contract (as bytes) at the source chain\n    // @param _dstAddress - the address on destination chain\n    // @param _nonce - the unbound message ordering nonce\n    // @param _gasLimit - the gas limit for external contract execution\n    // @param _payload - verified payload to send to the destination contract\n    function receivePayload(uint16 _srcChainId, bytes calldata _srcAddress, address _dstAddress, uint64 _nonce, uint _gasLimit, bytes calldata _payload) external;\n\n    // @notice get the inboundNonce of a receiver from a source chain which could be EVM or non-EVM chain\n    // @param _srcChainId - the source chain identifier\n    // @param _srcAddress - the source chain contract address\n    function getInboundNonce(uint16 _srcChainId, bytes calldata _srcAddress) external view returns (uint64);\n\n    // @notice get the outboundNonce from this source chain which, consequently, is always an EVM\n    // @param _srcAddress - the source chain contract address\n    function getOutboundNonce(uint16 _dstChainId, address _srcAddress) external view returns (uint64);\n\n    // @notice gets a quote in source native gas, for the amount that send() requires to pay for message delivery\n    // @param _dstChainId - the destination chain identifier\n    // @param _userApplication - the user app address on this EVM chain\n    // @param _payload - the custom message to send over LayerZero\n    // @param _payInZRO - if false, user app pays the protocol fee in native token\n    // @param _adapterParam - parameters for the adapter service, e.g. send some dust native token to dstChain\n    function estimateFees(uint16 _dstChainId, address _userApplication, bytes calldata _payload, bool _payInZRO, bytes calldata _adapterParam) external view returns (uint nativeFee, uint zroFee);\n\n    // @notice get this Endpoint\u0027s immutable source identifier\n    function getChainId() external view returns (uint16);\n\n    // @notice the interface to retry failed message on this Endpoint destination\n    // @param _srcChainId - the source chain identifier\n    // @param _srcAddress - the source chain contract address\n    // @param _payload - the payload to be retried\n    function retryPayload(uint16 _srcChainId, bytes calldata _srcAddress, bytes calldata _payload) external;\n\n    // @notice query if any STORED payload (message blocking) at the endpoint.\n    // @param _srcChainId - the source chain identifier\n    // @param _srcAddress - the source chain contract address\n    function hasStoredPayload(uint16 _srcChainId, bytes calldata _srcAddress) external view returns (bool);\n\n    // @notice query if the _libraryAddress is valid for sending msgs.\n    // @param _userApplication - the user app address on this EVM chain\n    function getSendLibraryAddress(address _userApplication) external view returns (address);\n\n    // @notice query if the _libraryAddress is valid for receiving msgs.\n    // @param _userApplication - the user app address on this EVM chain\n    function getReceiveLibraryAddress(address _userApplication) external view returns (address);\n\n    // @notice query if the non-reentrancy guard for send() is on\n    // @return true if the guard is on. false otherwise\n    function isSendingPayload() external view returns (bool);\n\n    // @notice query if the non-reentrancy guard for receive() is on\n    // @return true if the guard is on. false otherwise\n    function isReceivingPayload() external view returns (bool);\n\n    // @notice get the configuration of the LayerZero messaging library of the specified version\n    // @param _version - messaging library version\n    // @param _chainId - the chainId for the pending config change\n    // @param _userApplication - the contract address of the user application\n    // @param _configType - type of configuration. every messaging library has its own convention.\n    function getConfig(uint16 _version, uint16 _chainId, address _userApplication, uint _configType) external view returns (bytes memory);\n\n    // @notice get the send() LayerZero messaging library version\n    // @param _userApplication - the contract address of the user application\n    function getSendVersion(address _userApplication) external view returns (uint16);\n\n    // @notice get the lzReceive() LayerZero messaging library version\n    // @param _userApplication - the contract address of the user application\n    function getReceiveVersion(address _userApplication) external view returns (uint16);\n}\n"},"ILayerZeroMessagingLibrary.sol":{"content":"// SPDX-License-Identifier: BUSL-1.1\n\npragma solidity \u003e=0.7.0;\n\nimport \"./ILayerZeroUserApplicationConfig.sol\";\n\ninterface ILayerZeroMessagingLibrary {\n    // send(), messages will be inflight.\n    function send(address _userApplication, uint64 _lastNonce, uint16 _chainId, bytes calldata _destination, bytes calldata _payload, address payable refundAddress, address _zroPaymentAddress, bytes calldata _adapterParams) external payable;\n\n    // estimate native fee at the send side\n    function estimateFees(uint16 _chainId, address _userApplication, bytes calldata _payload, bool _payInZRO, bytes calldata _adapterParam) external view returns (uint nativeFee, uint zroFee);\n\n    //---------------------------------------------------------------------------\n    // setConfig / getConfig are User Application (UA) functions to specify Oracle, Relayer, blockConfirmations, libraryVersion\n    function setConfig(uint16 _chainId, address _userApplication, uint _configType, bytes calldata _config) external;\n\n    function getConfig(uint16 _chainId, address _userApplication, uint _configType) external view returns (bytes memory);\n}\n"},"ILayerZeroMessagingLibraryV2.sol":{"content":"// SPDX-License-Identifier: BUSL-1.1\n\npragma solidity \u003e=0.7.0;\n\nimport \"./ILayerZeroUserApplicationConfig.sol\";\nimport \"./ILayerZeroMessagingLibrary.sol\";\n\ninterface ILayerZeroMessagingLibraryV2 is ILayerZeroMessagingLibrary {\n    function getOutboundNonce(uint16 _chainId, bytes calldata _path) external view returns (uint64);\n}\n"},"ILayerZeroOracleV2.sol":{"content":"// SPDX-License-Identifier: BUSL-1.1\n\npragma solidity \u003e=0.7.0;\n\ninterface ILayerZeroOracleV2 {\n    // @notice query price and assign jobs at the same time\n    // @param _dstChainId - the destination endpoint identifier\n    // @param _outboundProofType - the proof type identifier to specify proof to be relayed\n    // @param _outboundBlockConfirmation - block confirmation delay before relaying blocks\n    // @param _userApplication - the source sending contract address\n    function assignJob(uint16 _dstChainId, uint16 _outboundProofType, uint64 _outboundBlockConfirmation, address _userApplication) external returns (uint price);\n\n    // @notice query the oracle price for relaying block information to the destination chain\n    // @param _dstChainId the destination endpoint identifier\n    // @param _outboundProofType the proof type identifier to specify the data to be relayed\n    // @param _outboundBlockConfirmation - block confirmation delay before relaying blocks\n    // @param _userApplication - the source sending contract address\n    function getFee(uint16 _dstChainId, uint16 _outboundProofType, uint64 _outboundBlockConfirmation, address _userApplication) external view returns (uint price);\n\n    // @notice withdraw the accrued fee in ultra light node\n    // @param _to - the fee receiver\n    // @param _amount - the withdrawal amount\n    function withdrawFee(address payable _to, uint _amount) external;\n}\n"},"ILayerZeroReceiver.sol":{"content":"// SPDX-License-Identifier: BUSL-1.1\n\npragma solidity \u003e=0.5.0;\n\ninterface ILayerZeroReceiver {\n    // @notice LayerZero endpoint will invoke this function to deliver the message on the destination\n    // @param _srcChainId - the source endpoint identifier\n    // @param _srcAddress - the source sending contract address from the source chain\n    // @param _nonce - the ordered message nonce\n    // @param _payload - the signed payload is the UA bytes has encoded to be sent\n    function lzReceive(uint16 _srcChainId, bytes calldata _srcAddress, uint64 _nonce, bytes calldata _payload) external;\n}\n"},"ILayerZeroRelayerV2.sol":{"content":"// SPDX-License-Identifier: BUSL-1.1\n\npragma solidity \u003e=0.7.0;\n\ninterface ILayerZeroRelayerV2 {\n    // @notice query price and assign jobs at the same time\n    // @param _dstChainId - the destination endpoint identifier\n    // @param _outboundProofType - the proof type identifier to specify proof to be relayed\n    // @param _userApplication - the source sending contract address. relayers may apply price discrimination to user apps\n    // @param _payloadSize - the length of the payload. it is an indicator of gas usage for relaying cross-chain messages\n    // @param _adapterParams - optional parameters for extra service plugins, e.g. sending dust tokens at the destination chain\n    function assignJob(uint16 _dstChainId, uint16 _outboundProofType, address _userApplication, uint _payloadSize, bytes calldata _adapterParams) external returns (uint price);\n\n    // @notice query the relayer price for relaying the payload and its proof to the destination chain\n    // @param _dstChainId - the destination endpoint identifier\n    // @param _outboundProofType - the proof type identifier to specify proof to be relayed\n    // @param _userApplication - the source sending contract address. relayers may apply price discrimination to user apps\n    // @param _payloadSize - the length of the payload. it is an indicator of gas usage for relaying cross-chain messages\n    // @param _adapterParams - optional parameters for extra service plugins, e.g. sending dust tokens at the destination chain\n    function getFee(uint16 _dstChainId, uint16 _outboundProofType, address _userApplication, uint _payloadSize, bytes calldata _adapterParams) external view returns (uint price);\n\n    // @notice withdraw the accrued fee in ultra light node\n    // @param _to - the fee receiver\n    // @param _amount - the withdrawal amount\n    function withdrawFee(address payable _to, uint _amount) external;\n}\n"},"ILayerZeroTreasury.sol":{"content":"// SPDX-License-Identifier: BUSL-1.1\n\npragma solidity \u003e=0.5.0;\n\ninterface ILayerZeroTreasury {\n    function getFees(bool payInZro, uint relayerFee, uint oracleFee) external view returns (uint);\n}\n"},"ILayerZeroUltraLightNodeV2.sol":{"content":"// SPDX-License-Identifier: BUSL-1.1\n\npragma solidity \u003e=0.7.0;\npragma abicoder v2;\n\ninterface ILayerZeroUltraLightNodeV2 {\n    // Relayer functions\n    function validateTransactionProof(uint16 _srcChainId, address _dstAddress, uint _gasLimit, bytes32 _lookupHash, bytes32 _blockData, bytes calldata _transactionProof) external;\n\n    // an Oracle delivers the block data using updateHash()\n    function updateHash(uint16 _srcChainId, bytes32 _lookupHash, uint _confirmations, bytes32 _blockData) external;\n\n    // can only withdraw the receivable of the msg.sender\n    function withdrawNative(address payable _to, uint _amount) external;\n\n    function withdrawZRO(address _to, uint _amount) external;\n\n    // view functions\n    function getAppConfig(uint16 _remoteChainId, address _userApplicationAddress) external view returns (ApplicationConfiguration memory);\n\n    function accruedNativeFee(address _address) external view returns (uint);\n\n    struct ApplicationConfiguration {\n        uint16 inboundProofLibraryVersion;\n        uint64 inboundBlockConfirmations;\n        address relayer;\n        uint16 outboundProofType;\n        uint64 outboundBlockConfirmations;\n        address oracle;\n    }\n\n    event HashReceived(uint16 indexed srcChainId, address indexed oracle, bytes32 lookupHash, bytes32 blockData, uint confirmations);\n    event RelayerParams(bytes adapterParams, uint16 outboundProofType);\n    event Packet(bytes payload);\n    event InvalidDst(uint16 indexed srcChainId, bytes srcAddress, address indexed dstAddress, uint64 nonce, bytes32 payloadHash);\n    event PacketReceived(uint16 indexed srcChainId, bytes srcAddress, address indexed dstAddress, uint64 nonce, bytes32 payloadHash);\n    event AppConfigUpdated(address indexed userApplication, uint indexed configType, bytes newConfig);\n    event AddInboundProofLibraryForChain(uint16 indexed chainId, address lib);\n    event EnableSupportedOutboundProof(uint16 indexed chainId, uint16 proofType);\n    event SetChainAddressSize(uint16 indexed chainId, uint size);\n    event SetDefaultConfigForChainId(uint16 indexed chainId, uint16 inboundProofLib, uint64 inboundBlockConfirm, address relayer, uint16 outboundProofType, uint64 outboundBlockConfirm, address oracle);\n    event SetDefaultAdapterParamsForChainId(uint16 indexed chainId, uint16 indexed proofType, bytes adapterParams);\n    event SetLayerZeroToken(address indexed tokenAddress);\n    event SetRemoteUln(uint16 indexed chainId, bytes32 uln);\n    event SetTreasury(address indexed treasuryAddress);\n    event WithdrawZRO(address indexed msgSender, address indexed to, uint amount);\n    event WithdrawNative(address indexed msgSender, address indexed to, uint amount);\n}\n"},"ILayerZeroUserApplicationConfig.sol":{"content":"// SPDX-License-Identifier: BUSL-1.1\n\npragma solidity \u003e=0.5.0;\n\ninterface ILayerZeroUserApplicationConfig {\n    // @notice set the configuration of the LayerZero messaging library of the specified version\n    // @param _version - messaging library version\n    // @param _chainId - the chainId for the pending config change\n    // @param _configType - type of configuration. every messaging library has its own convention.\n    // @param _config - configuration in the bytes. can encode arbitrary content.\n    function setConfig(uint16 _version, uint16 _chainId, uint _configType, bytes calldata _config) external;\n\n    // @notice set the send() LayerZero messaging library version to _version\n    // @param _version - new messaging library version\n    function setSendVersion(uint16 _version) external;\n\n    // @notice set the lzReceive() LayerZero messaging library version to _version\n    // @param _version - new messaging library version\n    function setReceiveVersion(uint16 _version) external;\n\n    // @notice Only when the UA needs to resume the message flow in blocking mode and clear the stored payload\n    // @param _srcChainId - the chainId of the source chain\n    // @param _srcAddress - the contract address of the source contract at the source chain\n    function forceResumeReceive(uint16 _srcChainId, bytes calldata _srcAddress) external;\n}\n"},"ILayerZeroValidationLibrary.sol":{"content":"// SPDX-License-Identifier: BUSL-1.1\n\npragma solidity \u003e=0.7.0;\npragma abicoder v2;\n\nimport \"./LayerZeroPacket.sol\";\n\ninterface ILayerZeroValidationLibrary {\n    function validateProof(bytes32 blockData, bytes calldata _data, uint _remoteAddressSize) external returns (LayerZeroPacket.Packet memory packet);\n}\n"},"LayerZeroPacket.sol":{"content":"// SPDX-License-Identifier: BUSL-1.1\n\npragma solidity 0.7.6;\n\nimport \"./Buffer.sol\";\nimport \"./SafeMath.sol\";\n\nlibrary LayerZeroPacket {\n    using Buffer for Buffer.buffer;\n    using SafeMath for uint;\n\n    struct Packet {\n        uint16 srcChainId;\n        uint16 dstChainId;\n        uint64 nonce;\n        address dstAddress;\n        bytes srcAddress;\n        bytes32 ulnAddress;\n        bytes payload;\n    }\n\n    function getPacket(\n        bytes memory data,\n        uint16 srcChain,\n        uint sizeOfSrcAddress,\n        bytes32 ulnAddress\n    ) internal pure returns (LayerZeroPacket.Packet memory) {\n        uint16 dstChainId;\n        address dstAddress;\n        uint size;\n        uint64 nonce;\n\n        // The log consists of the destination chain id and then a bytes payload\n        //      0--------------------------------------------31\n        // 0   |  total bytes size\n        // 32  |  destination chain id\n        // 64  |  bytes offset\n        // 96  |  bytes array size\n        // 128 |  payload\n        assembly {\n            dstChainId := mload(add(data, 32))\n            size := mload(add(data, 96)) /// size of the byte array\n            nonce := mload(add(data, 104)) // offset to convert to uint64  128  is index -24\n            dstAddress := mload(add(data, sub(add(128, sizeOfSrcAddress), 4))) // offset to convert to address 12 -8\n        }\n\n        Buffer.buffer memory srcAddressBuffer;\n        srcAddressBuffer.init(sizeOfSrcAddress);\n        srcAddressBuffer.writeRawBytes(0, data, 136, sizeOfSrcAddress); // 128 + 8\n\n        uint payloadSize = size.sub(28).sub(sizeOfSrcAddress);\n        Buffer.buffer memory payloadBuffer;\n        payloadBuffer.init(payloadSize);\n        payloadBuffer.writeRawBytes(0, data, sizeOfSrcAddress.add(156), payloadSize); // 148 + 8\n        return LayerZeroPacket.Packet(srcChain, dstChainId, nonce, dstAddress, srcAddressBuffer.buf, ulnAddress, payloadBuffer.buf);\n    }\n\n    function getPacketV2(\n        bytes memory data,\n        uint sizeOfSrcAddress,\n        bytes32 ulnAddress\n    ) internal pure returns (LayerZeroPacket.Packet memory) {\n        // packet def: abi.encodePacked(nonce, srcChain, srcAddress, dstChain, dstAddress, payload);\n        // data def: abi.encode(packet) = offset(32) + length(32) + packet\n        //              if from EVM\n        // 0 - 31       0 - 31          |  total bytes size\n        // 32 - 63      32 - 63         |  location\n        // 64 - 95      64 - 95         |  size of the packet\n        // 96 - 103     96 - 103        |  nonce\n        // 104 - 105    104 - 105       |  srcChainId\n        // 106 - P      106 - 125       |  srcAddress, where P = 106 + sizeOfSrcAddress - 1,\n        // P+1 - P+2    126 - 127       |  dstChainId\n        // P+3 - P+22   128 - 147       |  dstAddress\n        // P+23 - END   148 - END       |  payload\n\n        // decode the packet\n        uint256 realSize;\n        uint64 nonce;\n        uint16 srcChain;\n        uint16 dstChain;\n        address dstAddress;\n        assembly {\n            realSize := mload(add(data, 64))\n            nonce := mload(add(data, 72)) // 104 - 32\n            srcChain := mload(add(data, 74)) // 106 - 32\n            dstChain := mload(add(data, add(76, sizeOfSrcAddress))) // P + 3 - 32 = 105 + size + 3 - 32 = 76 + size\n            dstAddress := mload(add(data, add(96, sizeOfSrcAddress))) // P + 23 - 32 = 105 + size + 23 - 32 = 96 + size\n        }\n\n        require(srcChain != 0, \"LayerZeroPacket: invalid packet\");\n\n        Buffer.buffer memory srcAddressBuffer;\n        srcAddressBuffer.init(sizeOfSrcAddress);\n        srcAddressBuffer.writeRawBytes(0, data, 106, sizeOfSrcAddress);\n\n        uint nonPayloadSize = sizeOfSrcAddress.add(32);// 2 + 2 + 8 + 20, 32 + 20 = 52 if sizeOfSrcAddress == 20\n        uint payloadSize = realSize.sub(nonPayloadSize);\n        Buffer.buffer memory payloadBuffer;\n        payloadBuffer.init(payloadSize);\n        payloadBuffer.writeRawBytes(0, data, nonPayloadSize.add(96), payloadSize);\n\n        return LayerZeroPacket.Packet(srcChain, dstChain, nonce, dstAddress, srcAddressBuffer.buf, ulnAddress, payloadBuffer.buf);\n    }\n\n    function getPacketV3(\n        bytes memory data,\n        uint sizeOfSrcAddress,\n        bytes32 ulnAddress\n    ) internal pure returns (LayerZeroPacket.Packet memory) {\n        // data def: abi.encodePacked(nonce, srcChain, srcAddress, dstChain, dstAddress, payload);\n        //              if from EVM\n        // 0 - 31       0 - 31          |  total bytes size\n        // 32 - 39      32 - 39         |  nonce\n        // 40 - 41      40 - 41         |  srcChainId\n        // 42 - P       42 - 61         |  srcAddress, where P = 41 + sizeOfSrcAddress,\n        // P+1 - P+2    62 - 63         |  dstChainId\n        // P+3 - P+22   64 - 83         |  dstAddress\n        // P+23 - END   84 - END        |  payload\n\n        // decode the packet\n        uint256 realSize = data.length;\n        uint nonPayloadSize = sizeOfSrcAddress.add(32);// 2 + 2 + 8 + 20, 32 + 20 = 52 if sizeOfSrcAddress == 20\n        require(realSize \u003e= nonPayloadSize, \"LayerZeroPacket: invalid packet\");\n        uint payloadSize = realSize - nonPayloadSize;\n\n        uint64 nonce;\n        uint16 srcChain;\n        uint16 dstChain;\n        address dstAddress;\n        assembly {\n            nonce := mload(add(data, 8)) // 40 - 32\n            srcChain := mload(add(data, 10)) // 42 - 32\n            dstChain := mload(add(data, add(12, sizeOfSrcAddress))) // P + 3 - 32 = 41 + size + 3 - 32 = 12 + size\n            dstAddress := mload(add(data, add(32, sizeOfSrcAddress))) // P + 23 - 32 = 41 + size + 23 - 32 = 32 + size\n        }\n\n        require(srcChain != 0, \"LayerZeroPacket: invalid packet\");\n\n        Buffer.buffer memory srcAddressBuffer;\n        srcAddressBuffer.init(sizeOfSrcAddress);\n        srcAddressBuffer.writeRawBytes(0, data, 42, sizeOfSrcAddress);\n\n        Buffer.buffer memory payloadBuffer;\n        if (payloadSize \u003e 0) {\n            payloadBuffer.init(payloadSize);\n            payloadBuffer.writeRawBytes(0, data, nonPayloadSize.add(32), payloadSize);\n        }\n\n        return LayerZeroPacket.Packet(srcChain, dstChain, nonce, dstAddress, srcAddressBuffer.buf, ulnAddress, payloadBuffer.buf);\n    }\n}\n"},"NonceContract.sol":{"content":"// SPDX-License-Identifier: BUSL-1.1\n\npragma solidity 0.7.6;\n\nimport \"./ILayerZeroEndpoint.sol\";\n\ncontract NonceContract {\n    ILayerZeroEndpoint public immutable endpoint;\n    // outboundNonce = [dstChainId][remoteAddress + localAddress]\n    mapping(uint16 =\u003e mapping(bytes =\u003e uint64)) public outboundNonce;\n\n    constructor(address _endpoint) {\n        endpoint = ILayerZeroEndpoint(_endpoint);\n    }\n\n    function increment(uint16 _chainId, address _ua, bytes calldata _path) external returns (uint64) {\n        require(endpoint.getSendLibraryAddress(_ua) == msg.sender, \"NonceContract: msg.sender is not valid sendlibrary\");\n        return ++outboundNonce[_chainId][_path];\n    }\n}\n"},"Ownable.sol":{"content":"// SPDX-License-Identifier: MIT\n\npragma solidity ^0.7.0;\n\nimport \"./Context.sol\";\n/**\n * @dev Contract module which provides a basic access control mechanism, where\n * there is an account (an owner) that can be granted exclusive access to\n * specific functions.\n *\n * By default, the owner account will be the one that deploys the contract. This\n * can later be changed with {transferOwnership}.\n *\n * This module is used through inheritance. It will make available the modifier\n * `onlyOwner`, which can be applied to your functions to restrict their use to\n * the owner.\n */\nabstract contract Ownable is Context {\n    address private _owner;\n\n    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);\n\n    /**\n     * @dev Initializes the contract setting the deployer as the initial owner.\n     */\n    constructor () {\n        address msgSender = _msgSender();\n        _owner = msgSender;\n        emit OwnershipTransferred(address(0), msgSender);\n    }\n\n    /**\n     * @dev Returns the address of the current owner.\n     */\n    function owner() public view virtual returns (address) {\n        return _owner;\n    }\n\n    /**\n     * @dev Throws if called by any account other than the owner.\n     */\n    modifier onlyOwner() {\n        require(owner() == _msgSender(), \"Ownable: caller is not the owner\");\n        _;\n    }\n\n    /**\n     * @dev Leaves the contract without owner. It will not be possible to call\n     * `onlyOwner` functions anymore. Can only be called by the current owner.\n     *\n     * NOTE: Renouncing ownership will leave the contract without an owner,\n     * thereby removing any functionality that is only available to the owner.\n     */\n    function renounceOwnership() public virtual onlyOwner {\n        emit OwnershipTransferred(_owner, address(0));\n        _owner = address(0);\n    }\n\n    /**\n     * @dev Transfers ownership of the contract to a new account (`newOwner`).\n     * Can only be called by the current owner.\n     */\n    function transferOwnership(address newOwner) public virtual onlyOwner {\n        require(newOwner != address(0), \"Ownable: new owner is the zero address\");\n        emit OwnershipTransferred(_owner, newOwner);\n        _owner = newOwner;\n    }\n}\n"},"ReentrancyGuard.sol":{"content":"// SPDX-License-Identifier: MIT\n\npragma solidity ^0.7.0;\n\n/**\n * @dev Contract module that helps prevent reentrant calls to a function.\n *\n * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier\n * available, which can be applied to functions to make sure there are no nested\n * (reentrant) calls to them.\n *\n * Note that because there is a single `nonReentrant` guard, functions marked as\n * `nonReentrant` may not call one another. This can be worked around by making\n * those functions `private`, and then adding `external` `nonReentrant` entry\n * points to them.\n *\n * TIP: If you would like to learn more about reentrancy and alternative ways\n * to protect against it, check out our blog post\n * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].\n */\nabstract contract ReentrancyGuard {\n    // Booleans are more expensive than uint256 or any type that takes up a full\n    // word because each write operation emits an extra SLOAD to first read the\n    // slot\u0027s contents, replace the bits taken up by the boolean, and then write\n    // back. This is the compiler\u0027s defense against contract upgrades and\n    // pointer aliasing, and it cannot be disabled.\n\n    // The values being non-zero value makes deployment a bit more expensive,\n    // but in exchange the refund on every call to nonReentrant will be lower in\n    // amount. Since refunds are capped to a percentage of the total\n    // transaction\u0027s gas, it is best to keep them low in cases like this one, to\n    // increase the likelihood of the full refund coming into effect.\n    uint256 private constant _NOT_ENTERED = 1;\n    uint256 private constant _ENTERED = 2;\n\n    uint256 private _status;\n\n    constructor () {\n        _status = _NOT_ENTERED;\n    }\n\n    /**\n     * @dev Prevents a contract from calling itself, directly or indirectly.\n     * Calling a `nonReentrant` function from another `nonReentrant`\n     * function is not supported. It is possible to prevent this from happening\n     * by making the `nonReentrant` function external, and make it call a\n     * `private` function that does the actual work.\n     */\n    modifier nonReentrant() {\n        // On the first call to nonReentrant, _notEntered will be true\n        require(_status != _ENTERED, \"ReentrancyGuard: reentrant call\");\n\n        // Any calls to nonReentrant after this point will fail\n        _status = _ENTERED;\n\n        _;\n\n        // By storing the original value once again, a refund is triggered (see\n        // https://eips.ethereum.org/EIPS/eip-2200)\n        _status = _NOT_ENTERED;\n    }\n}\n"},"SafeERC20.sol":{"content":"// SPDX-License-Identifier: MIT\n\npragma solidity ^0.7.0;\n\nimport \"./IERC20.sol\";\nimport \"./SafeMath.sol\";\nimport \"./Address.sol\";\n\n/**\n * @title SafeERC20\n * @dev Wrappers around ERC20 operations that throw on failure (when the token\n * contract returns false). Tokens that return no value (and instead revert or\n * throw on failure) are also supported, non-reverting calls are assumed to be\n * successful.\n * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,\n * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.\n */\nlibrary SafeERC20 {\n    using SafeMath for uint256;\n    using Address for address;\n\n    function safeTransfer(IERC20 token, address to, uint256 value) internal {\n        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));\n    }\n\n    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {\n        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));\n    }\n\n    /**\n     * @dev Deprecated. This function has issues similar to the ones found in\n     * {IERC20-approve}, and its usage is discouraged.\n     *\n     * Whenever possible, use {safeIncreaseAllowance} and\n     * {safeDecreaseAllowance} instead.\n     */\n    function safeApprove(IERC20 token, address spender, uint256 value) internal {\n        // safeApprove should only be called when setting an initial allowance,\n        // or when resetting it to zero. To increase and decrease it, use\n        // \u0027safeIncreaseAllowance\u0027 and \u0027safeDecreaseAllowance\u0027\n        // solhint-disable-next-line max-line-length\n        require((value == 0) || (token.allowance(address(this), spender) == 0),\n            \"SafeERC20: approve from non-zero to non-zero allowance\"\n        );\n        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));\n    }\n\n    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {\n        uint256 newAllowance = token.allowance(address(this), spender).add(value);\n        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));\n    }\n\n    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {\n        uint256 newAllowance = token.allowance(address(this), spender).sub(value, \"SafeERC20: decreased allowance below zero\");\n        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));\n    }\n\n    /**\n     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement\n     * on the return value: the return value is optional (but if data is returned, it must not be false).\n     * @param token The token targeted by the call.\n     * @param data The call data (encoded using abi.encode or one of its variants).\n     */\n    function _callOptionalReturn(IERC20 token, bytes memory data) private {\n        // We need to perform a low level call here, to bypass Solidity\u0027s return data size checking mechanism, since\n        // we\u0027re implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that\n        // the target address contains contract code and also asserts for success in the low-level call.\n\n        bytes memory returndata = address(token).functionCall(data, \"SafeERC20: low-level call failed\");\n        if (returndata.length \u003e 0) { // Return data is optional\n            // solhint-disable-next-line max-line-length\n            require(abi.decode(returndata, (bool)), \"SafeERC20: ERC20 operation did not succeed\");\n        }\n    }\n}\n"},"SafeMath.sol":{"content":"// SPDX-License-Identifier: MIT\n\npragma solidity ^0.7.0;\n\n/**\n * @dev Wrappers over Solidity\u0027s arithmetic operations with added overflow\n * checks.\n *\n * Arithmetic operations in Solidity wrap on overflow. This can easily result\n * in bugs, because programmers usually assume that an overflow raises an\n * error, which is the standard behavior in high level programming languages.\n * `SafeMath` restores this intuition by reverting the transaction when an\n * operation overflows.\n *\n * Using this library instead of the unchecked operations eliminates an entire\n * class of bugs, so it\u0027s recommended to use it always.\n */\nlibrary SafeMath {\n    /**\n     * @dev Returns the addition of two unsigned integers, with an overflow flag.\n     *\n     * _Available since v3.4._\n     */\n    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        uint256 c = a + b;\n        if (c \u003c a) return (false, 0);\n        return (true, c);\n    }\n\n    /**\n     * @dev Returns the substraction of two unsigned integers, with an overflow flag.\n     *\n     * _Available since v3.4._\n     */\n    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        if (b \u003e a) return (false, 0);\n        return (true, a - b);\n    }\n\n    /**\n     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.\n     *\n     * _Available since v3.4._\n     */\n    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        // Gas optimization: this is cheaper than requiring \u0027a\u0027 not being zero, but the\n        // benefit is lost if \u0027b\u0027 is also tested.\n        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522\n        if (a == 0) return (true, 0);\n        uint256 c = a * b;\n        if (c / a != b) return (false, 0);\n        return (true, c);\n    }\n\n    /**\n     * @dev Returns the division of two unsigned integers, with a division by zero flag.\n     *\n     * _Available since v3.4._\n     */\n    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        if (b == 0) return (false, 0);\n        return (true, a / b);\n    }\n\n    /**\n     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.\n     *\n     * _Available since v3.4._\n     */\n    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        if (b == 0) return (false, 0);\n        return (true, a % b);\n    }\n\n    /**\n     * @dev Returns the addition of two unsigned integers, reverting on\n     * overflow.\n     *\n     * Counterpart to Solidity\u0027s `+` operator.\n     *\n     * Requirements:\n     *\n     * - Addition cannot overflow.\n     */\n    function add(uint256 a, uint256 b) internal pure returns (uint256) {\n        uint256 c = a + b;\n        require(c \u003e= a, \"SafeMath: addition overflow\");\n        return c;\n    }\n\n    /**\n     * @dev Returns the subtraction of two unsigned integers, reverting on\n     * overflow (when the result is negative).\n     *\n     * Counterpart to Solidity\u0027s `-` operator.\n     *\n     * Requirements:\n     *\n     * - Subtraction cannot overflow.\n     */\n    function sub(uint256 a, uint256 b) internal pure returns (uint256) {\n        require(b \u003c= a, \"SafeMath: subtraction overflow\");\n        return a - b;\n    }\n\n    /**\n     * @dev Returns the multiplication of two unsigned integers, reverting on\n     * overflow.\n     *\n     * Counterpart to Solidity\u0027s `*` operator.\n     *\n     * Requirements:\n     *\n     * - Multiplication cannot overflow.\n     */\n    function mul(uint256 a, uint256 b) internal pure returns (uint256) {\n        if (a == 0) return 0;\n        uint256 c = a * b;\n        require(c / a == b, \"SafeMath: multiplication overflow\");\n        return c;\n    }\n\n    /**\n     * @dev Returns the integer division of two unsigned integers, reverting on\n     * division by zero. The result is rounded towards zero.\n     *\n     * Counterpart to Solidity\u0027s `/` operator. Note: this function uses a\n     * `revert` opcode (which leaves remaining gas untouched) while Solidity\n     * uses an invalid opcode to revert (consuming all remaining gas).\n     *\n     * Requirements:\n     *\n     * - The divisor cannot be zero.\n     */\n    function div(uint256 a, uint256 b) internal pure returns (uint256) {\n        require(b \u003e 0, \"SafeMath: division by zero\");\n        return a / b;\n    }\n\n    /**\n     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),\n     * reverting when dividing by zero.\n     *\n     * Counterpart to Solidity\u0027s `%` operator. This function uses a `revert`\n     * opcode (which leaves remaining gas untouched) while Solidity uses an\n     * invalid opcode to revert (consuming all remaining gas).\n     *\n     * Requirements:\n     *\n     * - The divisor cannot be zero.\n     */\n    function mod(uint256 a, uint256 b) internal pure returns (uint256) {\n        require(b \u003e 0, \"SafeMath: modulo by zero\");\n        return a % b;\n    }\n\n    /**\n     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on\n     * overflow (when the result is negative).\n     *\n     * CAUTION: This function is deprecated because it requires allocating memory for the error\n     * message unnecessarily. For custom revert reasons use {trySub}.\n     *\n     * Counterpart to Solidity\u0027s `-` operator.\n     *\n     * Requirements:\n     *\n     * - Subtraction cannot overflow.\n     */\n    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {\n        require(b \u003c= a, errorMessage);\n        return a - b;\n    }\n\n    /**\n     * @dev Returns the integer division of two unsigned integers, reverting with custom message on\n     * division by zero. The result is rounded towards zero.\n     *\n     * CAUTION: This function is deprecated because it requires allocating memory for the error\n     * message unnecessarily. For custom revert reasons use {tryDiv}.\n     *\n     * Counterpart to Solidity\u0027s `/` operator. Note: this function uses a\n     * `revert` opcode (which leaves remaining gas untouched) while Solidity\n     * uses an invalid opcode to revert (consuming all remaining gas).\n     *\n     * Requirements:\n     *\n     * - The divisor cannot be zero.\n     */\n    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {\n        require(b \u003e 0, errorMessage);\n        return a / b;\n    }\n\n    /**\n     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),\n     * reverting with custom message when dividing by zero.\n     *\n     * CAUTION: This function is deprecated because it requires allocating memory for the error\n     * message unnecessarily. For custom revert reasons use {tryMod}.\n     *\n     * Counterpart to Solidity\u0027s `%` operator. This function uses a `revert`\n     * opcode (which leaves remaining gas untouched) while Solidity uses an\n     * invalid opcode to revert (consuming all remaining gas).\n     *\n     * Requirements:\n     *\n     * - The divisor cannot be zero.\n     */\n    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {\n        require(b \u003e 0, errorMessage);\n        return a % b;\n    }\n}\n"},"UltraLightNodeV2.sol":{"content":"// SPDX-License-Identifier: BUSL-1.1\n\npragma solidity 0.7.6;\npragma abicoder v2;\n\nimport \"./Ownable.sol\";\nimport \"./SafeMath.sol\";\nimport \"./ReentrancyGuard.sol\";\nimport \"./IERC20.sol\";\nimport \"./SafeERC20.sol\";\n\nimport \"./ILayerZeroValidationLibrary.sol\";\nimport \"./ILayerZeroReceiver.sol\";\nimport \"./ILayerZeroTreasury.sol\";\nimport \"./ILayerZeroEndpoint.sol\";\n// v2\nimport \"./ILayerZeroMessagingLibraryV2.sol\";\nimport \"./ILayerZeroOracleV2.sol\";\nimport \"./ILayerZeroUltraLightNodeV2.sol\";\nimport \"./ILayerZeroRelayerV2.sol\";\nimport \"./NonceContract.sol\";\n\ncontract UltraLightNodeV2 is ILayerZeroMessagingLibraryV2, ILayerZeroUltraLightNodeV2, ReentrancyGuard, Ownable {\n    using SafeERC20 for IERC20;\n    using SafeMath for uint;\n\n    // Application config\n    uint public constant CONFIG_TYPE_INBOUND_PROOF_LIBRARY_VERSION = 1;\n    uint public constant CONFIG_TYPE_INBOUND_BLOCK_CONFIRMATIONS = 2;\n    uint public constant CONFIG_TYPE_RELAYER = 3;\n    uint public constant CONFIG_TYPE_OUTBOUND_PROOF_TYPE = 4;\n    uint public constant CONFIG_TYPE_OUTBOUND_BLOCK_CONFIRMATIONS = 5;\n    uint public constant CONFIG_TYPE_ORACLE = 6;\n\n    // Token and Contracts\n    IERC20 public layerZeroToken;\n    ILayerZeroTreasury public treasuryContract;\n\n    mapping(address =\u003e uint) public nativeFees;\n    uint public treasuryZROFees;\n\n    // User Application\n    mapping(address =\u003e mapping(uint16 =\u003e ApplicationConfiguration)) public appConfig; // app address =\u003e chainId =\u003e config\n    mapping(uint16 =\u003e ApplicationConfiguration) public defaultAppConfig; // default UA settings if no version specified\n    mapping(uint16 =\u003e mapping(uint16 =\u003e bytes)) public defaultAdapterParams;\n\n    // Validation\n    mapping(uint16 =\u003e mapping(uint16 =\u003e address)) public inboundProofLibrary; // chainId =\u003e library Id =\u003e inboundProofLibrary contract\n    mapping(uint16 =\u003e uint16) public maxInboundProofLibrary; // chainId =\u003e inboundProofLibrary\n    mapping(uint16 =\u003e mapping(uint16 =\u003e bool)) public supportedOutboundProof; // chainId =\u003e outboundProofType =\u003e enabled\n    mapping(uint16 =\u003e uint) public chainAddressSizeMap;\n    mapping(address =\u003e mapping(uint16 =\u003e mapping(bytes32 =\u003e mapping(bytes32 =\u003e uint)))) public hashLookup; //[oracle][srcChainId][blockhash][datahash] -\u003e confirmation\n    mapping(uint16 =\u003e bytes32) public ulnLookup; // remote ulns\n\n    ILayerZeroEndpoint public immutable endpoint;\n    uint16 public immutable localChainId;\n    NonceContract public immutable nonceContract;\n\n    constructor(address _endpoint, address _nonceContract, uint16 _localChainId) {\n        require(_endpoint != address(0x0), \"LayerZero: endpoint cannot be zero address\");\n        require(_nonceContract != address(0x0), \"LayerZero: nonceContract cannot be zero address\");\n        ILayerZeroEndpoint lzEndpoint = ILayerZeroEndpoint(_endpoint);\n        localChainId = _localChainId;\n        endpoint = lzEndpoint;\n        nonceContract = NonceContract(_nonceContract);\n    }\n\n    // only the endpoint can call SEND() and setConfig()\n    modifier onlyEndpoint() {\n        require(address(endpoint) == msg.sender, \"LayerZero: only endpoint\");\n        _;\n    }\n\n    //----------------------------------------------------------------------------------\n    // PROTOCOL\n    function validateTransactionProof(uint16 _srcChainId, address _dstAddress, uint _gasLimit, bytes32 _lookupHash, bytes32 _blockData, bytes calldata _transactionProof) external override {\n        // retrieve UA\u0027s configuration using the _dstAddress from arguments.\n        ApplicationConfiguration memory uaConfig = _getAppConfig(_srcChainId, _dstAddress);\n\n        // assert that the caller == UA\u0027s relayer\n        require(uaConfig.relayer == msg.sender, \"LayerZero: invalid relayer\");\n\n        LayerZeroPacket.Packet memory _packet;\n        uint remoteAddressSize = chainAddressSizeMap[_srcChainId];\n        require(remoteAddressSize != 0, \"LayerZero: incorrect remote address size\");\n        {\n            // assert that the data submitted by UA\u0027s oracle have no fewer confirmations than UA\u0027s configuration\n            uint storedConfirmations = hashLookup[uaConfig.oracle][_srcChainId][_lookupHash][_blockData];\n            require(storedConfirmations \u003e 0 \u0026\u0026 storedConfirmations \u003e= uaConfig.inboundBlockConfirmations, \"LayerZero: not enough block confirmations\");\n\n            // decode\n            address inboundProofLib = inboundProofLibrary[_srcChainId][uaConfig.inboundProofLibraryVersion];\n            _packet = ILayerZeroValidationLibrary(inboundProofLib).validateProof(_blockData, _transactionProof, remoteAddressSize);\n        }\n\n        // packet content assertion\n        require(ulnLookup[_srcChainId] == _packet.ulnAddress \u0026\u0026 _packet.ulnAddress != bytes32(0), \"LayerZero: invalid _packet.ulnAddress\");\n        require(_packet.srcChainId == _srcChainId, \"LayerZero: invalid srcChain Id\");\n        // failsafe because the remoteAddress size being passed into validateProof trims the address this should not hit\n        require(_packet.srcAddress.length == remoteAddressSize, \"LayerZero: invalid srcAddress size\");\n        require(_packet.dstChainId == localChainId, \"LayerZero: invalid dstChain Id\");\n        require(_packet.dstAddress == _dstAddress, \"LayerZero: invalid dstAddress\");\n\n        // if the dst is not a contract, then emit and return early. This will break inbound nonces, but this particular\n        // path is already broken and wont ever be able to deliver anyways\n        if (!_isContract(_dstAddress)) {\n            emit InvalidDst(_packet.srcChainId, _packet.srcAddress, _packet.dstAddress, _packet.nonce, keccak256(_packet.payload));\n            return;\n        }\n\n        bytes memory pathData = abi.encodePacked(_packet.srcAddress, _packet.dstAddress);\n        emit PacketReceived(_packet.srcChainId, _packet.srcAddress, _packet.dstAddress, _packet.nonce, keccak256(_packet.payload));\n        endpoint.receivePayload(_srcChainId, pathData, _dstAddress, _packet.nonce, _gasLimit, _packet.payload);\n    }\n\n    function send(address _ua, uint64, uint16 _dstChainId, bytes calldata _path, bytes calldata _payload, address payable _refundAddress, address _zroPaymentAddress, bytes calldata _adapterParams) external payable override onlyEndpoint {\n        address ua = _ua;\n        uint16 dstChainId = _dstChainId;\n        require(ulnLookup[dstChainId] != bytes32(0), \"LayerZero: dstChainId does not exist\");\n\n        bytes memory dstAddress;\n        uint64 nonce;\n        // code block for solving \u0027Stack Too Deep\u0027\n        {\n            uint chainAddressSize = chainAddressSizeMap[dstChainId];\n            // path = remoteAddress + localAddress\n            require(chainAddressSize != 0 \u0026\u0026 _path.length == 20 + chainAddressSize, \"LayerZero: incorrect remote address size\");\n            address srcInPath;\n            bytes memory path = _path; // copy to memory\n            assembly {\n                srcInPath := mload(add(add(path, 20), chainAddressSize)) // chainAddressSize + 20\n            }\n            require(ua == srcInPath, \"LayerZero: wrong path data\");\n            dstAddress = _path[0:chainAddressSize];\n            nonce = nonceContract.increment(dstChainId, ua, path);\n        }\n\n        bytes memory payload = _payload;\n        ApplicationConfiguration memory uaConfig = _getAppConfig(dstChainId, ua);\n\n        // compute all the fees\n        uint relayerFee = _handleRelayer(dstChainId, uaConfig, ua, payload.length, _adapterParams);\n        uint oracleFee = _handleOracle(dstChainId, uaConfig, ua);\n        uint nativeProtocolFee = _handleProtocolFee(relayerFee, oracleFee, ua, _zroPaymentAddress);\n\n        // total native fee, does not include ZRO protocol fee\n        uint totalNativeFee = relayerFee.add(oracleFee).add(nativeProtocolFee);\n\n        // assert the user has attached enough native token for this address\n        require(totalNativeFee \u003c= msg.value, \"LayerZero: not enough native for fees\");\n        // refund if they send too much\n        uint amount = msg.value.sub(totalNativeFee);\n        if (amount \u003e 0) {\n            (bool success, ) = _refundAddress.call{value: amount}(\"\");\n            require(success, \"LayerZero: failed to refund\");\n        }\n\n        // emit the data packet\n        bytes memory encodedPayload = abi.encodePacked(nonce, localChainId, ua, dstChainId, dstAddress, payload);\n        emit Packet(encodedPayload);\n    }\n\n    function _handleRelayer(uint16 _dstChainId, ApplicationConfiguration memory _uaConfig, address _ua, uint _payloadSize, bytes memory _adapterParams) internal returns (uint relayerFee) {\n        if (_adapterParams.length == 0) {\n            _adapterParams = defaultAdapterParams[_dstChainId][_uaConfig.outboundProofType];\n        }\n        address relayerAddress = _uaConfig.relayer;\n        ILayerZeroRelayerV2 relayer = ILayerZeroRelayerV2(relayerAddress);\n        relayerFee = relayer.assignJob(_dstChainId, _uaConfig.outboundProofType, _ua, _payloadSize, _adapterParams);\n\n        _creditNativeFee(relayerAddress, relayerFee);\n\n        // emit the param events\n        emit RelayerParams(_adapterParams, _uaConfig.outboundProofType);\n    }\n\n    function _handleOracle(uint16 _dstChainId, ApplicationConfiguration memory _uaConfig, address _ua) internal returns (uint oracleFee) {\n        address oracleAddress = _uaConfig.oracle;\n        oracleFee = ILayerZeroOracleV2(oracleAddress).assignJob(_dstChainId, _uaConfig.outboundProofType, _uaConfig.outboundBlockConfirmations, _ua);\n\n        _creditNativeFee(oracleAddress, oracleFee);\n    }\n\n    function _handleProtocolFee(uint _relayerFee, uint _oracleFee, address _ua, address _zroPaymentAddress) internal returns (uint protocolNativeFee) {\n        // if no ZRO token or not specifying a payment address, pay in native token\n        bool payInNative = _zroPaymentAddress == address(0x0) || address(layerZeroToken) == address(0x0);\n        uint protocolFee = treasuryContract.getFees(!payInNative, _relayerFee, _oracleFee);\n\n        if (protocolFee \u003e 0) {\n            if (payInNative) {\n                address treasuryAddress = address(treasuryContract);\n                _creditNativeFee(treasuryAddress, protocolFee);\n                protocolNativeFee = protocolFee;\n            } else {\n                // zro payment address must equal the ua or the tx.origin otherwise the transaction reverts\n                require(_zroPaymentAddress == _ua || _zroPaymentAddress == tx.origin, \"LayerZero: must be paid by sender or origin\");\n\n                // transfer the LayerZero token to this contract from the payee\n                layerZeroToken.safeTransferFrom(_zroPaymentAddress, address(this), protocolFee);\n\n                treasuryZROFees = treasuryZROFees.add(protocolFee);\n            }\n        }\n    }\n\n    function _creditNativeFee(address _receiver, uint _amount) internal {\n        nativeFees[_receiver] = nativeFees[_receiver].add(_amount);\n    }\n\n    // Can be called by any address to update a block header\n    // can only upload new block data or the same block data with more confirmations\n    function updateHash(uint16 _srcChainId, bytes32 _lookupHash, uint _confirmations, bytes32 _blockData) external override {\n        uint storedConfirmations = hashLookup[msg.sender][_srcChainId][_lookupHash][_blockData];\n\n        // if it has a record, requires a larger confirmation.\n        require(storedConfirmations \u003c _confirmations, \"LayerZero: oracle data can only update if it has more confirmations\");\n\n        // set the new information into storage\n        hashLookup[msg.sender][_srcChainId][_lookupHash][_blockData] = _confirmations;\n\n        emit HashReceived(_srcChainId, msg.sender, _lookupHash, _blockData, _confirmations);\n    }\n\n    //----------------------------------------------------------------------------------\n    // Other Library Interfaces\n\n    // default to DEFAULT setting if ZERO value\n    function getAppConfig(uint16 _remoteChainId, address _ua) external view override returns (ApplicationConfiguration memory) {\n        return _getAppConfig(_remoteChainId, _ua);\n    }\n\n    function _getAppConfig(uint16 _remoteChainId, address _ua) internal view returns (ApplicationConfiguration memory) {\n        ApplicationConfiguration memory config = appConfig[_ua][_remoteChainId];\n        ApplicationConfiguration storage defaultConfig = defaultAppConfig[_remoteChainId];\n\n        if (config.inboundProofLibraryVersion == 0) {\n            config.inboundProofLibraryVersion = defaultConfig.inboundProofLibraryVersion;\n        }\n\n        if (config.inboundBlockConfirmations == 0) {\n            config.inboundBlockConfirmations = defaultConfig.inboundBlockConfirmations;\n        }\n\n        if (config.relayer == address(0x0)) {\n            config.relayer = defaultConfig.relayer;\n        }\n\n        if (config.outboundProofType == 0) {\n            config.outboundProofType = defaultConfig.outboundProofType;\n        }\n\n        if (config.outboundBlockConfirmations == 0) {\n            config.outboundBlockConfirmations = defaultConfig.outboundBlockConfirmations;\n        }\n\n        if (config.oracle == address(0x0)) {\n            config.oracle = defaultConfig.oracle;\n        }\n\n        return config;\n    }\n\n    function setConfig(uint16 _remoteChainId, address _ua, uint _configType, bytes calldata _config) external override onlyEndpoint {\n        ApplicationConfiguration storage uaConfig = appConfig[_ua][_remoteChainId];\n        if (_configType == CONFIG_TYPE_INBOUND_PROOF_LIBRARY_VERSION) {\n            uint16 inboundProofLibraryVersion = abi.decode(_config, (uint16));\n            require(inboundProofLibraryVersion \u003c= maxInboundProofLibrary[_remoteChainId], \"LayerZero: invalid inbound proof library version\");\n            uaConfig.inboundProofLibraryVersion = inboundProofLibraryVersion;\n        } else if (_configType == CONFIG_TYPE_INBOUND_BLOCK_CONFIRMATIONS) {\n            uint64 blockConfirmations = abi.decode(_config, (uint64));\n            uaConfig.inboundBlockConfirmations = blockConfirmations;\n        } else if (_configType == CONFIG_TYPE_RELAYER) {\n            address relayer = abi.decode(_config, (address));\n            uaConfig.relayer = relayer;\n        } else if (_configType == CONFIG_TYPE_OUTBOUND_PROOF_TYPE) {\n            uint16 outboundProofType = abi.decode(_config, (uint16));\n            require(supportedOutboundProof[_remoteChainId][outboundProofType] || outboundProofType == 0, \"LayerZero: invalid outbound proof type\");\n            uaConfig.outboundProofType = outboundProofType;\n        } else if (_configType == CONFIG_TYPE_OUTBOUND_BLOCK_CONFIRMATIONS) {\n            uint64 blockConfirmations = abi.decode(_config, (uint64));\n            uaConfig.outboundBlockConfirmations = blockConfirmations;\n        } else if (_configType == CONFIG_TYPE_ORACLE) {\n            address oracle = abi.decode(_config, (address));\n            uaConfig.oracle = oracle;\n        } else {\n            revert(\"LayerZero: Invalid config type\");\n        }\n\n        emit AppConfigUpdated(_ua, _configType, _config);\n    }\n\n    function getConfig(uint16 _remoteChainId, address _ua, uint _configType) external view override returns (bytes memory) {\n        ApplicationConfiguration storage uaConfig = appConfig[_ua][_remoteChainId];\n\n        if (_configType == CONFIG_TYPE_INBOUND_PROOF_LIBRARY_VERSION) {\n            if (uaConfig.inboundProofLibraryVersion == 0) {\n                return abi.encode(defaultAppConfig[_remoteChainId].inboundProofLibraryVersion);\n            }\n            return abi.encode(uaConfig.inboundProofLibraryVersion);\n        } else if (_configType == CONFIG_TYPE_INBOUND_BLOCK_CONFIRMATIONS) {\n            if (uaConfig.inboundBlockConfirmations == 0) {\n                return abi.encode(defaultAppConfig[_remoteChainId].inboundBlockConfirmations);\n            }\n            return abi.encode(uaConfig.inboundBlockConfirmations);\n        } else if (_configType == CONFIG_TYPE_RELAYER) {\n            if (uaConfig.relayer == address(0x0)) {\n                return abi.encode(defaultAppConfig[_remoteChainId].relayer);\n            }\n            return abi.encode(uaConfig.relayer);\n        } else if (_configType == CONFIG_TYPE_OUTBOUND_PROOF_TYPE) {\n            if (uaConfig.outboundProofType == 0) {\n                return abi.encode(defaultAppConfig[_remoteChainId].outboundProofType);\n            }\n            return abi.encode(uaConfig.outboundProofType);\n        } else if (_configType == CONFIG_TYPE_OUTBOUND_BLOCK_CONFIRMATIONS) {\n            if (uaConfig.outboundBlockConfirmations == 0) {\n                return abi.encode(defaultAppConfig[_remoteChainId].outboundBlockConfirmations);\n            }\n            return abi.encode(uaConfig.outboundBlockConfirmations);\n        } else if (_configType == CONFIG_TYPE_ORACLE) {\n            if (uaConfig.oracle == address(0x0)) {\n                return abi.encode(defaultAppConfig[_remoteChainId].oracle);\n            }\n            return abi.encode(uaConfig.oracle);\n        } else {\n            revert(\"LayerZero: Invalid config type\");\n        }\n    }\n\n    // returns the native fee the UA pays to cover fees\n    function estimateFees(uint16 _dstChainId, address _ua, bytes calldata _payload, bool _payInZRO, bytes calldata _adapterParams) external view override returns (uint nativeFee, uint zroFee) {\n        ApplicationConfiguration memory uaConfig = _getAppConfig(_dstChainId, _ua);\n\n        // Relayer Fee\n        bytes memory adapterParams;\n        if (_adapterParams.length \u003e 0) {\n            adapterParams = _adapterParams;\n        } else {\n            adapterParams = defaultAdapterParams[_dstChainId][uaConfig.outboundProofType];\n        }\n        uint relayerFee = ILayerZeroRelayerV2(uaConfig.relayer).getFee(_dstChainId, uaConfig.outboundProofType, _ua, _payload.length, adapterParams);\n\n        // Oracle Fee\n        address ua = _ua; // stack too deep\n        uint oracleFee = ILayerZeroOracleV2(uaConfig.oracle).getFee(_dstChainId, uaConfig.outboundProofType, uaConfig.outboundBlockConfirmations, ua);\n\n        // LayerZero Fee\n        uint protocolFee = treasuryContract.getFees(_payInZRO, relayerFee, oracleFee);\n        _payInZRO ? zroFee = protocolFee : nativeFee = protocolFee;\n\n        // return the sum of fees\n        nativeFee = nativeFee.add(relayerFee).add(oracleFee);\n    }\n\n    //---------------------------------------------------------------------------\n    // Claim Fees\n\n    // universal withdraw ZRO token function\n    function withdrawZRO(address _to, uint _amount) external override nonReentrant {\n        require(msg.sender == address(treasuryContract), \"LayerZero: only treasury\");\n        treasuryZROFees = treasuryZROFees.sub(_amount);\n        layerZeroToken.safeTransfer(_to, _amount);\n        emit WithdrawZRO(msg.sender, _to, _amount);\n    }\n\n    // universal withdraw native token function.\n    // the source contract should perform all the authentication control\n    function withdrawNative(address payable _to, uint _amount) external override nonReentrant {\n        require(_to != address(0x0), \"LayerZero: _to cannot be zero address\");\n        nativeFees[msg.sender] = nativeFees[msg.sender].sub(_amount);\n\n        (bool success, ) = _to.call{value: _amount}(\"\");\n        require(success, \"LayerZero: withdraw failed\");\n        emit WithdrawNative(msg.sender, _to, _amount);\n    }\n\n    //---------------------------------------------------------------------------\n    // Owner calls, configuration only.\n    function setLayerZeroToken(address _layerZeroToken) external onlyOwner {\n        require(_layerZeroToken != address(0x0), \"LayerZero: _layerZeroToken cannot be zero address\");\n        layerZeroToken = IERC20(_layerZeroToken);\n        emit SetLayerZeroToken(_layerZeroToken);\n    }\n\n    function setTreasury(address _treasury) external onlyOwner {\n        require(_treasury != address(0x0), \"LayerZero: treasury cannot be zero address\");\n        treasuryContract = ILayerZeroTreasury(_treasury);\n        emit SetTreasury(_treasury);\n    }\n\n    function addInboundProofLibraryForChain(uint16 _chainId, address _library) external onlyOwner {\n        require(_library != address(0x0), \"LayerZero: library cannot be zero address\");\n        uint16 libId = maxInboundProofLibrary[_chainId];\n        require(libId \u003c 65535, \"LayerZero: can not add new library\");\n        maxInboundProofLibrary[_chainId] = ++libId;\n        inboundProofLibrary[_chainId][libId] = _library;\n        emit AddInboundProofLibraryForChain(_chainId, _library);\n    }\n\n    function enableSupportedOutboundProof(uint16 _chainId, uint16 _proofType) external onlyOwner {\n        supportedOutboundProof[_chainId][_proofType] = true;\n        emit EnableSupportedOutboundProof(_chainId, _proofType);\n    }\n\n    function setDefaultConfigForChainId(uint16 _chainId, uint16 _inboundProofLibraryVersion, uint64 _inboundBlockConfirmations, address _relayer, uint16 _outboundProofType, uint64 _outboundBlockConfirmations, address _oracle) external onlyOwner {\n        require(_inboundProofLibraryVersion \u003c= maxInboundProofLibrary[_chainId] \u0026\u0026 _inboundProofLibraryVersion \u003e 0, \"LayerZero: invalid inbound proof library version\");\n        require(_inboundBlockConfirmations \u003e 0, \"LayerZero: invalid inbound block confirmation\");\n        require(_relayer != address(0x0), \"LayerZero: invalid relayer address\");\n        require(supportedOutboundProof[_chainId][_outboundProofType], \"LayerZero: invalid outbound proof type\");\n        require(_outboundBlockConfirmations \u003e 0, \"LayerZero: invalid outbound block confirmation\");\n        require(_oracle != address(0x0), \"LayerZero: invalid oracle address\");\n        defaultAppConfig[_chainId] = ApplicationConfiguration(_inboundProofLibraryVersion, _inboundBlockConfirmations, _relayer, _outboundProofType, _outboundBlockConfirmations, _oracle);\n        emit SetDefaultConfigForChainId(_chainId, _inboundProofLibraryVersion, _inboundBlockConfirmations, _relayer, _outboundProofType, _outboundBlockConfirmations, _oracle);\n    }\n\n    function setDefaultAdapterParamsForChainId(uint16 _chainId, uint16 _proofType, bytes calldata _adapterParams) external onlyOwner {\n        defaultAdapterParams[_chainId][_proofType] = _adapterParams;\n        emit SetDefaultAdapterParamsForChainId(_chainId, _proofType, _adapterParams);\n    }\n\n    function setRemoteUln(uint16 _remoteChainId, bytes32 _remoteUln) external onlyOwner {\n        require(ulnLookup[_remoteChainId] == bytes32(0), \"LayerZero: remote uln already set\");\n        ulnLookup[_remoteChainId] = _remoteUln;\n        emit SetRemoteUln(_remoteChainId, _remoteUln);\n    }\n\n    function setChainAddressSize(uint16 _chainId, uint _size) external onlyOwner {\n        require(chainAddressSizeMap[_chainId] == 0, \"LayerZero: remote chain address size already set\");\n        chainAddressSizeMap[_chainId] = _size;\n        emit SetChainAddressSize(_chainId, _size);\n    }\n\n    //----------------------------------------------------------------------------------\n    // view functions\n\n    function accruedNativeFee(address _address) external view override returns (uint) {\n        return nativeFees[_address];\n    }\n\n    function getOutboundNonce(uint16 _chainId, bytes calldata _path) external view override returns (uint64) {\n        return nonceContract.outboundNonce(_chainId, _path);\n    }\n\n    function _isContract(address addr) internal view returns (bool) {\n        uint size;\n        assembly {\n            size := extcodesize(addr)\n        }\n        return size != 0;\n    }\n}\n"}}

// SPDX-License-Identifier: MIT
pragma solidity >=0.5.0;
import "./ILayerZeroUserApplicationConfig.sol";
interface ILayerZeroEndpoint is ILayerZeroUserApplicationConfig {
    // @notice send a LayerZero message to the specified address at a LayerZero endpoint.
    // @param _dstChainId - the destination chain identifier
    // @param _destination - the address on destination chain (in bytes). address length/format may vary by chains
    // @param _payload - a custom bytes payload to send to the destination contract
    // @param _refundAddress - if the source transaction is cheaper than the amount of value passed, refund the additional amount to this address
    // @param _zroPaymentAddress - the address of the ZRO token holder who would pay for the transaction
    // @param _adapterParams - parameters for custom functionality. e.g. receive airdropped native gas from the relayer on destination
    function send(uint16 _dstChainId, bytes calldata _destination, bytes calldata _payload, address payable _refundAddress, address _zroPaymentAddress, bytes calldata _adapterParams) external payable;
    // @notice used by the messaging library to publish verified payload
    // @param _srcChainId - the source chain identifier
    // @param _srcAddress - the source contract (as bytes) at the source chain
    // @param _dstAddress - the address on destination chain
    // @param _nonce - the unbound message ordering nonce
    // @param _gasLimit - the gas limit for external contract execution
    // @param _payload - verified payload to send to the destination contract
    function receivePayload(uint16 _srcChainId, bytes calldata _srcAddress, address _dstAddress, uint64 _nonce, uint _gasLimit, bytes calldata _payload) external;
    // @notice get the inboundNonce of a lzApp from a source chain which could be EVM or non-EVM chain
    // @param _srcChainId - the source chain identifier
    // @param _srcAddress - the source chain contract address
    function getInboundNonce(uint16 _srcChainId, bytes calldata _srcAddress) external view returns (uint64);
    // @notice get the outboundNonce from this source chain which, consequently, is always an EVM
    // @param _srcAddress - the source chain contract address
    function getOutboundNonce(uint16 _dstChainId, address _srcAddress) external view returns (uint64);
    // @notice gets a quote in source native gas, for the amount that send() requires to pay for message delivery
    // @param _dstChainId - the destination chain identifier
    // @param _userApplication - the user app address on this EVM chain
    // @param _payload - the custom message to send over LayerZero
    // @param _payInZRO - if false, user app pays the protocol fee in native token
    // @param _adapterParam - parameters for the adapter service, e.g. send some dust native token to dstChain
    function estimateFees(uint16 _dstChainId, address _userApplication, bytes calldata _payload, bool _payInZRO, bytes calldata _adapterParam) external view returns (uint nativeFee, uint zroFee);
    // @notice get this Endpoint's immutable source identifier
    function getChainId() external view returns (uint16);
    // @notice the interface to retry failed message on this Endpoint destination
    // @param _srcChainId - the source chain identifier
    // @param _srcAddress - the source chain contract address
    // @param _payload - the payload to be retried
    function retryPayload(uint16 _srcChainId, bytes calldata _srcAddress, bytes calldata _payload) external;
    // @notice query if any STORED payload (message blocking) at the endpoint.
    // @param _srcChainId - the source chain identifier
    // @param _srcAddress - the source chain contract address
    function hasStoredPayload(uint16 _srcChainId, bytes calldata _srcAddress) external view returns (bool);
    // @notice query if the _libraryAddress is valid for sending msgs.
    // @param _userApplication - the user app address on this EVM chain
    function getSendLibraryAddress(address _userApplication) external view returns (address);
    // @notice query if the _libraryAddress is valid for receiving msgs.
    // @param _userApplication - the user app address on this EVM chain
    function getReceiveLibraryAddress(address _userApplication) external view returns (address);
    // @notice query if the non-reentrancy guard for send() is on
    // @return true if the guard is on. false otherwise
    function isSendingPayload() external view returns (bool);
    // @notice query if the non-reentrancy guard for receive() is on
    // @return true if the guard is on. false otherwise
    function isReceivingPayload() external view returns (bool);
    // @notice get the configuration of the LayerZero messaging library of the specified version
    // @param _version - messaging library version
    // @param _chainId - the chainId for the pending config change
    // @param _userApplication - the contract address of the user application
    // @param _configType - type of configuration. every messaging library has its own convention.
    function getConfig(uint16 _version, uint16 _chainId, address _userApplication, uint _configType) external view returns (bytes memory);
    // @notice get the send() LayerZero messaging library version
    // @param _userApplication - the contract address of the user application
    function getSendVersion(address _userApplication) external view returns (uint16);
    // @notice get the lzReceive() LayerZero messaging library version
    // @param _userApplication - the contract address of the user application
    function getReceiveVersion(address _userApplication) external view returns (uint16);
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.5.0;
interface ILayerZeroReceiver {
    // @notice LayerZero endpoint will invoke this function to deliver the message on the destination
    // @param _srcChainId - the source endpoint identifier
    // @param _srcAddress - the source sending contract address from the source chain
    // @param _nonce - the ordered message nonce
    // @param _payload - the signed payload is the UA bytes has encoded to be sent
    function lzReceive(uint16 _srcChainId, bytes calldata _srcAddress, uint64 _nonce, bytes calldata _payload) external;
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.5.0;
interface ILayerZeroUserApplicationConfig {
    // @notice set the configuration of the LayerZero messaging library of the specified version
    // @param _version - messaging library version
    // @param _chainId - the chainId for the pending config change
    // @param _configType - type of configuration. every messaging library has its own convention.
    // @param _config - configuration in the bytes. can encode arbitrary content.
    function setConfig(uint16 _version, uint16 _chainId, uint _configType, bytes calldata _config) external;
    // @notice set the send() LayerZero messaging library version to _version
    // @param _version - new messaging library version
    function setSendVersion(uint16 _version) external;
    // @notice set the lzReceive() LayerZero messaging library version to _version
    // @param _version - new messaging library version
    function setReceiveVersion(uint16 _version) external;
    // @notice Only when the UA needs to resume the message flow in blocking mode and clear the stored payload
    // @param _srcChainId - the chainId of the source chain
    // @param _srcAddress - the contract address of the source contract at the source chain
    function forceResumeReceive(uint16 _srcChainId, bytes calldata _srcAddress) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "@openzeppelin/contracts/access/Ownable.sol";
import "../interfaces/ILayerZeroReceiver.sol";
import "../interfaces/ILayerZeroUserApplicationConfig.sol";
import "../interfaces/ILayerZeroEndpoint.sol";
import "../util/BytesLib.sol";
/*
 * a generic LzReceiver implementation
 */
abstract contract LzApp is Ownable, ILayerZeroReceiver, ILayerZeroUserApplicationConfig {
    using BytesLib for bytes;
    // ua can not send payload larger than this by default, but it can be changed by the ua owner
    uint constant public DEFAULT_PAYLOAD_SIZE_LIMIT = 10000;
    ILayerZeroEndpoint public immutable lzEndpoint;
    mapping(uint16 => bytes) public trustedRemoteLookup;
    mapping(uint16 => mapping(uint16 => uint)) public minDstGasLookup;
    mapping(uint16 => uint) public payloadSizeLimitLookup;
    address public precrime;
    event SetPrecrime(address precrime);
    event SetTrustedRemote(uint16 _remoteChainId, bytes _path);
    event SetTrustedRemoteAddress(uint16 _remoteChainId, bytes _remoteAddress);
    event SetMinDstGas(uint16 _dstChainId, uint16 _type, uint _minDstGas);
    constructor(address _endpoint) {
        lzEndpoint = ILayerZeroEndpoint(_endpoint);
    }
    function lzReceive(uint16 _srcChainId, bytes calldata _srcAddress, uint64 _nonce, bytes calldata _payload) public virtual override {
        // lzReceive must be called by the endpoint for security
        require(_msgSender() == address(lzEndpoint), "LzApp: invalid endpoint caller");
        bytes memory trustedRemote = trustedRemoteLookup[_srcChainId];
        // if will still block the message pathway from (srcChainId, srcAddress). should not receive message from untrusted remote.
        require(_srcAddress.length == trustedRemote.length && trustedRemote.length > 0 && keccak256(_srcAddress) == keccak256(trustedRemote), "LzApp: invalid source sending contract");
        _blockingLzReceive(_srcChainId, _srcAddress, _nonce, _payload);
    }
    // abstract function - the default behaviour of LayerZero is blocking. See: NonblockingLzApp if you dont need to enforce ordered messaging
    function _blockingLzReceive(uint16 _srcChainId, bytes memory _srcAddress, uint64 _nonce, bytes memory _payload) internal virtual;
    function _lzSend(uint16 _dstChainId, bytes memory _payload, address payable _refundAddress, address _zroPaymentAddress, bytes memory _adapterParams, uint _nativeFee) internal virtual {
        bytes memory trustedRemote = trustedRemoteLookup[_dstChainId];
        require(trustedRemote.length != 0, "LzApp: destination chain is not a trusted source");
        _checkPayloadSize(_dstChainId, _payload.length);
        lzEndpoint.send{value: _nativeFee}(_dstChainId, trustedRemote, _payload, _refundAddress, _zroPaymentAddress, _adapterParams);
    }
    function _checkGasLimit(uint16 _dstChainId, uint16 _type, bytes memory _adapterParams, uint _extraGas) internal view virtual {
        uint providedGasLimit = _getGasLimit(_adapterParams);
        uint minGasLimit = minDstGasLookup[_dstChainId][_type] + _extraGas;
        require(minGasLimit > 0, "LzApp: minGasLimit not set");
        require(providedGasLimit >= minGasLimit, "LzApp: gas limit is too low");
    }
    function _getGasLimit(bytes memory _adapterParams) internal pure virtual returns (uint gasLimit) {
        require(_adapterParams.length >= 34, "LzApp: invalid adapterParams");
        assembly {
            gasLimit := mload(add(_adapterParams, 34))
        }
    }
    function _checkPayloadSize(uint16 _dstChainId, uint _payloadSize) internal view virtual {
        uint payloadSizeLimit = payloadSizeLimitLookup[_dstChainId];
        if (payloadSizeLimit == 0) { // use default if not set
            payloadSizeLimit = DEFAULT_PAYLOAD_SIZE_LIMIT;
        }
        require(_payloadSize <= payloadSizeLimit, "LzApp: payload size is too large");
    }
    //---------------------------UserApplication config----------------------------------------
    function getConfig(uint16 _version, uint16 _chainId, address, uint _configType) external view returns (bytes memory) {
        return lzEndpoint.getConfig(_version, _chainId, address(this), _configType);
    }
    // generic config for LayerZero user Application
    function setConfig(uint16 _version, uint16 _chainId, uint _configType, bytes calldata _config) external override onlyOwner {
        lzEndpoint.setConfig(_version, _chainId, _configType, _config);
    }
    function setSendVersion(uint16 _version) external override onlyOwner {
        lzEndpoint.setSendVersion(_version);
    }
    function setReceiveVersion(uint16 _version) external override onlyOwner {
        lzEndpoint.setReceiveVersion(_version);
    }
    function forceResumeReceive(uint16 _srcChainId, bytes calldata _srcAddress) external override onlyOwner {
        lzEndpoint.forceResumeReceive(_srcChainId, _srcAddress);
    }
    // _path = abi.encodePacked(remoteAddress, localAddress)
    // this function set the trusted path for the cross-chain communication
    function setTrustedRemote(uint16 _srcChainId, bytes calldata _path) external onlyOwner {
        trustedRemoteLookup[_srcChainId] = _path;
        emit SetTrustedRemote(_srcChainId, _path);
    }
    function setTrustedRemoteAddress(uint16 _remoteChainId, bytes calldata _remoteAddress) external onlyOwner {
        trustedRemoteLookup[_remoteChainId] = abi.encodePacked(_remoteAddress, address(this));
        emit SetTrustedRemoteAddress(_remoteChainId, _remoteAddress);
    }
    function getTrustedRemoteAddress(uint16 _remoteChainId) external view returns (bytes memory) {
        bytes memory path = trustedRemoteLookup[_remoteChainId];
        require(path.length != 0, "LzApp: no trusted path record");
        return path.slice(0, path.length - 20); // the last 20 bytes should be address(this)
    }
    function setPrecrime(address _precrime) external onlyOwner {
        precrime = _precrime;
        emit SetPrecrime(_precrime);
    }
    function setMinDstGas(uint16 _dstChainId, uint16 _packetType, uint _minGas) external onlyOwner {
        require(_minGas > 0, "LzApp: invalid minGas");
        minDstGasLookup[_dstChainId][_packetType] = _minGas;
        emit SetMinDstGas(_dstChainId, _packetType, _minGas);
    }
    // if the size is 0, it means default size limit
    function setPayloadSizeLimit(uint16 _dstChainId, uint _size) external onlyOwner {
        payloadSizeLimitLookup[_dstChainId] = _size;
    }
    //--------------------------- VIEW FUNCTION ----------------------------------------
    function isTrustedRemote(uint16 _srcChainId, bytes calldata _srcAddress) external view returns (bool) {
        bytes memory trustedSource = trustedRemoteLookup[_srcChainId];
        return keccak256(trustedSource) == keccak256(_srcAddress);
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./LzApp.sol";
import "../util/ExcessivelySafeCall.sol";
/*
 * the default LayerZero messaging behaviour is blocking, i.e. any failed message will block the channel
 * this abstract class try-catch all fail messages and store locally for future retry. hence, non-blocking
 * NOTE: if the srcAddress is not configured properly, it will still block the message pathway from (srcChainId, srcAddress)
 */
abstract contract NonblockingLzApp is LzApp {
    using ExcessivelySafeCall for address;
    constructor(address _endpoint) LzApp(_endpoint) {}
    mapping(uint16 => mapping(bytes => mapping(uint64 => bytes32))) public failedMessages;
    event MessageFailed(uint16 _srcChainId, bytes _srcAddress, uint64 _nonce, bytes _payload, bytes _reason);
    event RetryMessageSuccess(uint16 _srcChainId, bytes _srcAddress, uint64 _nonce, bytes32 _payloadHash);
    // overriding the virtual function in LzReceiver
    function _blockingLzReceive(uint16 _srcChainId, bytes memory _srcAddress, uint64 _nonce, bytes memory _payload) internal virtual override {
        (bool success, bytes memory reason) = address(this).excessivelySafeCall(gasleft(), 150, abi.encodeWithSelector(this.nonblockingLzReceive.selector, _srcChainId, _srcAddress, _nonce, _payload));
        // try-catch all errors/exceptions
        if (!success) {
            _storeFailedMessage(_srcChainId, _srcAddress, _nonce, _payload, reason);
        }
    }
    function _storeFailedMessage(uint16 _srcChainId, bytes memory _srcAddress, uint64 _nonce, bytes memory _payload, bytes memory _reason) internal virtual {
        failedMessages[_srcChainId][_srcAddress][_nonce] = keccak256(_payload);
        emit MessageFailed(_srcChainId, _srcAddress, _nonce, _payload, _reason);
    }
    function nonblockingLzReceive(uint16 _srcChainId, bytes calldata _srcAddress, uint64 _nonce, bytes calldata _payload) public virtual {
        // only internal transaction
        require(_msgSender() == address(this), "NonblockingLzApp: caller must be LzApp");
        _nonblockingLzReceive(_srcChainId, _srcAddress, _nonce, _payload);
    }
    //@notice override this function
    function _nonblockingLzReceive(uint16 _srcChainId, bytes memory _srcAddress, uint64 _nonce, bytes memory _payload) internal virtual;
    function retryMessage(uint16 _srcChainId, bytes calldata _srcAddress, uint64 _nonce, bytes calldata _payload) public payable virtual {
        // assert there is message to retry
        bytes32 payloadHash = failedMessages[_srcChainId][_srcAddress][_nonce];
        require(payloadHash != bytes32(0), "NonblockingLzApp: no stored message");
        require(keccak256(_payload) == payloadHash, "NonblockingLzApp: invalid payload");
        // clear the stored message
        failedMessages[_srcChainId][_srcAddress][_nonce] = bytes32(0);
        // execute the message. revert if it fails again
        _nonblockingLzReceive(_srcChainId, _srcAddress, _nonce, _payload);
        emit RetryMessageSuccess(_srcChainId, _srcAddress, _nonce, payloadHash);
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../OFTCoreV2.sol";
import "./IOFTWithFee.sol";
import "./Fee.sol";
import "@openzeppelin/contracts/utils/introspection/ERC165.sol";
abstract contract BaseOFTWithFee is OFTCoreV2, Fee, ERC165, IOFTWithFee {
    constructor(uint8 _sharedDecimals, address _lzEndpoint) OFTCoreV2(_sharedDecimals, _lzEndpoint) {
    }
    /************************************************************************
    * public functions
    ************************************************************************/
    function sendFrom(address _from, uint16 _dstChainId, bytes32 _toAddress, uint _amount, uint _minAmount, LzCallParams calldata _callParams) public payable virtual override {
        (_amount,) = _payOFTFee(_from, _dstChainId, _amount);
        _amount = _send(_from, _dstChainId, _toAddress, _amount, _callParams.refundAddress, _callParams.zroPaymentAddress, _callParams.adapterParams);
        require(_amount >= _minAmount, "BaseOFTWithFee: amount is less than minAmount");
    }
    function sendAndCall(address _from, uint16 _dstChainId, bytes32 _toAddress, uint _amount, uint _minAmount, bytes calldata _payload, uint64 _dstGasForCall, LzCallParams calldata _callParams) public payable virtual override {
        (_amount,) = _payOFTFee(_from, _dstChainId, _amount);
        _amount = _sendAndCall(_from, _dstChainId, _toAddress, _amount, _payload, _dstGasForCall, _callParams.refundAddress, _callParams.zroPaymentAddress, _callParams.adapterParams);
        require(_amount >= _minAmount, "BaseOFTWithFee: amount is less than minAmount");
    }
    /************************************************************************
    * public view functions
    ************************************************************************/
    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
        return interfaceId == type(IOFTWithFee).interfaceId || super.supportsInterface(interfaceId);
    }
    function estimateSendFee(uint16 _dstChainId, bytes32 _toAddress, uint _amount, bool _useZro, bytes calldata _adapterParams) public view virtual override returns (uint nativeFee, uint zroFee) {
        return _estimateSendFee(_dstChainId, _toAddress, _amount, _useZro, _adapterParams);
    }
    function estimateSendAndCallFee(uint16 _dstChainId, bytes32 _toAddress, uint _amount, bytes calldata _payload, uint64 _dstGasForCall, bool _useZro, bytes calldata _adapterParams) public view virtual override returns (uint nativeFee, uint zroFee) {
        return _estimateSendAndCallFee(_dstChainId, _toAddress, _amount, _payload, _dstGasForCall, _useZro, _adapterParams);
    }
    function circulatingSupply() public view virtual override returns (uint);
    function token() public view virtual override returns (address);
    function _transferFrom(address _from, address _to, uint _amount) internal virtual override (Fee, OFTCoreV2) returns (uint);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "@openzeppelin/contracts/access/Ownable.sol";
abstract contract Fee is Ownable {
    uint public constant BP_DENOMINATOR = 10000;
    mapping(uint16 => FeeConfig) public chainIdToFeeBps;
    uint16 public defaultFeeBp;
    address public feeOwner; // defaults to owner
    struct FeeConfig {
        uint16 feeBP;
        bool enabled;
    }
    event SetFeeBp(uint16 dstchainId, bool enabled, uint16 feeBp);
    event SetDefaultFeeBp(uint16 feeBp);
    event SetFeeOwner(address feeOwner);
    constructor(){
        feeOwner = owner();
    }
    function setDefaultFeeBp(uint16 _feeBp) public virtual onlyOwner {
        require(_feeBp <= BP_DENOMINATOR, "Fee: fee bp must be <= BP_DENOMINATOR");
        defaultFeeBp = _feeBp;
        emit SetDefaultFeeBp(defaultFeeBp);
    }
    function setFeeBp(uint16 _dstChainId, bool _enabled, uint16 _feeBp) public virtual onlyOwner {
        require(_feeBp <= BP_DENOMINATOR, "Fee: fee bp must be <= BP_DENOMINATOR");
        chainIdToFeeBps[_dstChainId] = FeeConfig(_feeBp, _enabled);
        emit SetFeeBp(_dstChainId, _enabled, _feeBp);
    }
    function setFeeOwner(address _feeOwner) public virtual onlyOwner {
        require(_feeOwner != address(0x0), "Fee: feeOwner cannot be 0x");
        feeOwner = _feeOwner;
        emit SetFeeOwner(_feeOwner);
    }
    function quoteOFTFee(uint16 _dstChainId, uint _amount) public virtual view returns (uint fee) {
        FeeConfig memory config = chainIdToFeeBps[_dstChainId];
        if (config.enabled) {
            fee = _amount * config.feeBP / BP_DENOMINATOR;
        } else if (defaultFeeBp > 0) {
            fee = _amount * defaultFeeBp / BP_DENOMINATOR;
        } else {
            fee = 0;
        }
    }
    function _payOFTFee(address _from, uint16 _dstChainId, uint _amount) internal virtual returns (uint amount, uint fee) {
        fee = quoteOFTFee(_dstChainId, _amount);
        amount = _amount - fee;
        if (fee > 0) {
            _transferFrom(_from, feeOwner, fee);
        }
    }
    function _transferFrom(address _from, address _to, uint _amount) internal virtual returns (uint);
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.5.0;
import "../ICommonOFT.sol";
/**
 * @dev Interface of the IOFT core standard
 */
interface IOFTWithFee is ICommonOFT {
    /**
     * @dev send `_amount` amount of token to (`_dstChainId`, `_toAddress`) from `_from`
     * `_from` the owner of token
     * `_dstChainId` the destination chain identifier
     * `_toAddress` can be any size depending on the `dstChainId`.
     * `_amount` the quantity of tokens in wei
     * `_minAmount` the minimum amount of tokens to receive on dstChain
     * `_refundAddress` the address LayerZero refunds if too much message fee is sent
     * `_zroPaymentAddress` set to address(0x0) if not paying in ZRO (LayerZero Token)
     * `_adapterParams` is a flexible bytes array to indicate messaging adapter services
     */
    function sendFrom(address _from, uint16 _dstChainId, bytes32 _toAddress, uint _amount, uint _minAmount, LzCallParams calldata _callParams) external payable;
    function sendAndCall(address _from, uint16 _dstChainId, bytes32 _toAddress, uint _amount, uint _minAmount, bytes calldata _payload, uint64 _dstGasForCall, LzCallParams calldata _callParams) external payable;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./BaseOFTWithFee.sol";
import "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
contract ProxyOFTWithFee is BaseOFTWithFee {
    using SafeERC20 for IERC20;
    IERC20 internal immutable innerToken;
    uint internal immutable ld2sdRate;
    // total amount is transferred from this chain to other chains, ensuring the total is less than uint64.max in sd
    uint public outboundAmount;
    constructor(address _token, uint8 _sharedDecimals, address _lzEndpoint) BaseOFTWithFee(_sharedDecimals, _lzEndpoint) {
        innerToken = IERC20(_token);
        (bool success, bytes memory data) = _token.staticcall(
            abi.encodeWithSignature("decimals()")
        );
        require(success, "ProxyOFTWithFee: failed to get token decimals");
        uint8 decimals = abi.decode(data, (uint8));
        require(_sharedDecimals <= decimals, "ProxyOFTWithFee: sharedDecimals must be <= decimals");
        ld2sdRate = 10 ** (decimals - _sharedDecimals);
    }
    /************************************************************************
    * public functions
    ************************************************************************/
    function circulatingSupply() public view virtual override returns (uint) {
        return innerToken.totalSupply() - outboundAmount;
    }
    function token() public view virtual override returns (address) {
        return address(innerToken);
    }
    /************************************************************************
    * internal functions
    ************************************************************************/
    function _debitFrom(address _from, uint16, bytes32, uint _amount) internal virtual override returns (uint) {
        require(_from == _msgSender(), "ProxyOFTWithFee: owner is not send caller");
        _amount = _transferFrom(_from, address(this), _amount);
        // _amount still may have dust if the token has transfer fee, then give the dust back to the sender
        (uint amount, uint dust) = _removeDust(_amount);
        if (dust > 0) innerToken.safeTransfer(_from, dust);
        // check total outbound amount
        outboundAmount += amount;
        uint cap = _sd2ld(type(uint64).max);
        require(cap >= outboundAmount, "ProxyOFTWithFee: outboundAmount overflow");
        return amount;
    }
    function _creditTo(uint16, address _toAddress, uint _amount) internal virtual override returns (uint) {
        outboundAmount -= _amount;
        // tokens are already in this contract, so no need to transfer
        if (_toAddress == address(this)) {
            return _amount;
        }
        return _transferFrom(address(this), _toAddress, _amount);
    }
    function _transferFrom(address _from, address _to, uint _amount) internal virtual override returns (uint) {
        uint before = innerToken.balanceOf(_to);
        if (_from == address(this)) {
            innerToken.safeTransfer(_to, _amount);
        } else {
            innerToken.safeTransferFrom(_from, _to, _amount);
        }
        return innerToken.balanceOf(_to) - before;
    }
    function _ld2sdRate() internal view virtual override returns (uint) {
        return ld2sdRate;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.5.0;
import "@openzeppelin/contracts/utils/introspection/IERC165.sol";
/**
 * @dev Interface of the IOFT core standard
 */
interface ICommonOFT is IERC165 {
    struct LzCallParams {
        address payable refundAddress;
        address zroPaymentAddress;
        bytes adapterParams;
    }
    /**
     * @dev estimate send token `_tokenId` to (`_dstChainId`, `_toAddress`)
     * _dstChainId - L0 defined chain id to send tokens too
     * _toAddress - dynamic bytes array which contains the address to whom you are sending tokens to on the dstChain
     * _amount - amount of the tokens to transfer
     * _useZro - indicates to use zro to pay L0 fees
     * _adapterParam - flexible bytes array to indicate messaging adapter services in L0
     */
    function estimateSendFee(uint16 _dstChainId, bytes32 _toAddress, uint _amount, bool _useZro, bytes calldata _adapterParams) external view returns (uint nativeFee, uint zroFee);
    function estimateSendAndCallFee(uint16 _dstChainId, bytes32 _toAddress, uint _amount, bytes calldata _payload, uint64 _dstGasForCall, bool _useZro, bytes calldata _adapterParams) external view returns (uint nativeFee, uint zroFee);
    /**
     * @dev returns the circulating amount of tokens on current chain
     */
    function circulatingSupply() external view returns (uint);
    /**
     * @dev returns the address of the ERC20 token
     */
    function token() external view returns (address);
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity >=0.5.0;
interface IOFTReceiverV2 {
    /**
     * @dev Called by the OFT contract when tokens are received from source chain.
     * @param _srcChainId The chain id of the source chain.
     * @param _srcAddress The address of the OFT token contract on the source chain.
     * @param _nonce The nonce of the transaction on the source chain.
     * @param _from The address of the account who calls the sendAndCall() on the source chain.
     * @param _amount The amount of tokens to transfer.
     * @param _payload Additional data with no specified format.
     */
    function onOFTReceived(uint16 _srcChainId, bytes calldata _srcAddress, uint64 _nonce, bytes32 _from, uint _amount, bytes calldata _payload) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../../../lzApp/NonblockingLzApp.sol";
import "../../../util/ExcessivelySafeCall.sol";
import "./ICommonOFT.sol";
import "./IOFTReceiverV2.sol";
abstract contract OFTCoreV2 is NonblockingLzApp {
    using BytesLib for bytes;
    using ExcessivelySafeCall for address;
    uint public constant NO_EXTRA_GAS = 0;
    // packet type
    uint8 public constant PT_SEND = 0;
    uint8 public constant PT_SEND_AND_CALL = 1;
    uint8 public immutable sharedDecimals;
    bool public useCustomAdapterParams;
    mapping(uint16 => mapping(bytes => mapping(uint64 => bool))) public creditedPackets;
    /**
     * @dev Emitted when `_amount` tokens are moved from the `_sender` to (`_dstChainId`, `_toAddress`)
     * `_nonce` is the outbound nonce
     */
    event SendToChain(uint16 indexed _dstChainId, address indexed _from, bytes32 indexed _toAddress, uint _amount);
    /**
     * @dev Emitted when `_amount` tokens are received from `_srcChainId` into the `_toAddress` on the local chain.
     * `_nonce` is the inbound nonce.
     */
    event ReceiveFromChain(uint16 indexed _srcChainId, address indexed _to, uint _amount);
    event SetUseCustomAdapterParams(bool _useCustomAdapterParams);
    event CallOFTReceivedSuccess(uint16 indexed _srcChainId, bytes _srcAddress, uint64 _nonce, bytes32 _hash);
    event NonContractAddress(address _address);
    // _sharedDecimals should be the minimum decimals on all chains
    constructor(uint8 _sharedDecimals, address _lzEndpoint) NonblockingLzApp(_lzEndpoint) {
        sharedDecimals = _sharedDecimals;
    }
    /************************************************************************
    * public functions
    ************************************************************************/
    function callOnOFTReceived(uint16 _srcChainId, bytes calldata _srcAddress, uint64 _nonce, bytes32 _from, address _to, uint _amount, bytes calldata _payload, uint _gasForCall) public virtual {
        require(_msgSender() == address(this), "OFTCore: caller must be OFTCore");
        // send
        _amount = _transferFrom(address(this), _to, _amount);
        emit ReceiveFromChain(_srcChainId, _to, _amount);
        // call
        IOFTReceiverV2(_to).onOFTReceived{gas: _gasForCall}(_srcChainId, _srcAddress, _nonce, _from, _amount, _payload);
    }
    function setUseCustomAdapterParams(bool _useCustomAdapterParams) public virtual onlyOwner {
        useCustomAdapterParams = _useCustomAdapterParams;
        emit SetUseCustomAdapterParams(_useCustomAdapterParams);
    }
    /************************************************************************
    * internal functions
    ************************************************************************/
    function _estimateSendFee(uint16 _dstChainId, bytes32 _toAddress, uint _amount, bool _useZro, bytes memory _adapterParams) internal view virtual returns (uint nativeFee, uint zroFee) {
        // mock the payload for sendFrom()
        bytes memory payload = _encodeSendPayload(_toAddress, _ld2sd(_amount));
        return lzEndpoint.estimateFees(_dstChainId, address(this), payload, _useZro, _adapterParams);
    }
    function _estimateSendAndCallFee(uint16 _dstChainId, bytes32 _toAddress, uint _amount, bytes memory _payload, uint64 _dstGasForCall, bool _useZro, bytes memory _adapterParams) internal view virtual returns (uint nativeFee, uint zroFee) {
        // mock the payload for sendAndCall()
        bytes memory payload = _encodeSendAndCallPayload(msg.sender, _toAddress, _ld2sd(_amount), _payload, _dstGasForCall);
        return lzEndpoint.estimateFees(_dstChainId, address(this), payload, _useZro, _adapterParams);
    }
    function _nonblockingLzReceive(uint16 _srcChainId, bytes memory _srcAddress, uint64 _nonce, bytes memory _payload) internal virtual override {
        uint8 packetType = _payload.toUint8(0);
        if (packetType == PT_SEND) {
            _sendAck(_srcChainId, _srcAddress, _nonce, _payload);
        } else if (packetType == PT_SEND_AND_CALL) {
            _sendAndCallAck(_srcChainId, _srcAddress, _nonce, _payload);
        } else {
            revert("OFTCore: unknown packet type");
        }
    }
    function _send(address _from, uint16 _dstChainId, bytes32 _toAddress, uint _amount, address payable _refundAddress, address _zroPaymentAddress, bytes memory _adapterParams) internal virtual returns (uint amount) {
        _checkAdapterParams(_dstChainId, PT_SEND, _adapterParams, NO_EXTRA_GAS);
        (amount,) = _removeDust(_amount);
        amount = _debitFrom(_from, _dstChainId, _toAddress, amount); // amount returned should not have dust
        require(amount > 0, "OFTCore: amount too small");
        bytes memory lzPayload = _encodeSendPayload(_toAddress, _ld2sd(amount));
        _lzSend(_dstChainId, lzPayload, _refundAddress, _zroPaymentAddress, _adapterParams, msg.value);
        emit SendToChain(_dstChainId, _from, _toAddress, amount);
    }
    function _sendAck(uint16 _srcChainId, bytes memory, uint64, bytes memory _payload) internal virtual {
        (address to, uint64 amountSD) = _decodeSendPayload(_payload);
        if (to == address(0)) {
            to = address(0xdead);
        }
        uint amount = _sd2ld(amountSD);
        amount = _creditTo(_srcChainId, to, amount);
        emit ReceiveFromChain(_srcChainId, to, amount);
    }
    function _sendAndCall(address _from, uint16 _dstChainId, bytes32 _toAddress, uint _amount, bytes memory _payload, uint64 _dstGasForCall, address payable _refundAddress, address _zroPaymentAddress, bytes memory _adapterParams) internal virtual returns (uint amount) {
        _checkAdapterParams(_dstChainId, PT_SEND_AND_CALL, _adapterParams, _dstGasForCall);
        (amount,) = _removeDust(_amount);
        amount = _debitFrom(_from, _dstChainId, _toAddress, amount);
        require(amount > 0, "OFTCore: amount too small");
        // encode the msg.sender into the payload instead of _from
        bytes memory lzPayload = _encodeSendAndCallPayload(msg.sender, _toAddress, _ld2sd(amount), _payload, _dstGasForCall);
        _lzSend(_dstChainId, lzPayload, _refundAddress, _zroPaymentAddress, _adapterParams, msg.value);
        emit SendToChain(_dstChainId, _from, _toAddress, amount);
    }
    function _sendAndCallAck(uint16 _srcChainId, bytes memory _srcAddress, uint64 _nonce, bytes memory _payload) internal virtual {
        (bytes32 from, address to, uint64 amountSD, bytes memory payloadForCall, uint64 gasForCall) = _decodeSendAndCallPayload(_payload);
        bool credited = creditedPackets[_srcChainId][_srcAddress][_nonce];
        uint amount = _sd2ld(amountSD);
        // credit to this contract first, and then transfer to receiver only if callOnOFTReceived() succeeds
        if (!credited) {
            amount = _creditTo(_srcChainId, address(this), amount);
            creditedPackets[_srcChainId][_srcAddress][_nonce] = true;
        }
        if (!_isContract(to)) {
            emit NonContractAddress(to);
            return;
        }
        // workaround for stack too deep
        uint16 srcChainId = _srcChainId;
        bytes memory srcAddress = _srcAddress;
        uint64 nonce = _nonce;
        bytes memory payload = _payload;
        bytes32 from_ = from;
        address to_ = to;
        uint amount_ = amount;
        bytes memory payloadForCall_ = payloadForCall;
        // no gas limit for the call if retry
        uint gas = credited ? gasleft() : gasForCall;
        (bool success, bytes memory reason) = address(this).excessivelySafeCall(gasleft(), 150, abi.encodeWithSelector(this.callOnOFTReceived.selector, srcChainId, srcAddress, nonce, from_, to_, amount_, payloadForCall_, gas));
        if (success) {
            bytes32 hash = keccak256(payload);
            emit CallOFTReceivedSuccess(srcChainId, srcAddress, nonce, hash);
        } else {
            // store the failed message into the nonblockingLzApp
            _storeFailedMessage(srcChainId, srcAddress, nonce, payload, reason);
        }
    }
    function _isContract(address _account) internal view returns (bool) {
        return _account.code.length > 0;
    }
    function _checkAdapterParams(uint16 _dstChainId, uint16 _pkType, bytes memory _adapterParams, uint _extraGas) internal virtual {
        if (useCustomAdapterParams) {
            _checkGasLimit(_dstChainId, _pkType, _adapterParams, _extraGas);
        } else {
            require(_adapterParams.length == 0, "OFTCore: _adapterParams must be empty.");
        }
    }
    function _ld2sd(uint _amount) internal virtual view returns (uint64) {
        uint amountSD = _amount / _ld2sdRate();
        require(amountSD <= type(uint64).max, "OFTCore: amountSD overflow");
        return uint64(amountSD);
    }
    function _sd2ld(uint64 _amountSD) internal virtual view returns (uint) {
        return _amountSD * _ld2sdRate();
    }
    function _removeDust(uint _amount) internal virtual view returns (uint amountAfter, uint dust) {
        dust = _amount % _ld2sdRate();
        amountAfter = _amount - dust;
    }
    function _encodeSendPayload(bytes32 _toAddress, uint64 _amountSD) internal virtual view returns (bytes memory) {
        return abi.encodePacked(PT_SEND, _toAddress, _amountSD);
    }
    function _decodeSendPayload(bytes memory _payload) internal virtual view returns (address to, uint64 amountSD) {
        require(_payload.toUint8(0) == PT_SEND && _payload.length == 41, "OFTCore: invalid payload");
        to = _payload.toAddress(13); // drop the first 12 bytes of bytes32
        amountSD = _payload.toUint64(33);
    }
    function _encodeSendAndCallPayload(address _from, bytes32 _toAddress, uint64 _amountSD, bytes memory _payload, uint64 _dstGasForCall) internal virtual view returns (bytes memory) {
        return abi.encodePacked(
            PT_SEND_AND_CALL,
            _toAddress,
            _amountSD,
            _addressToBytes32(_from),
            _dstGasForCall,
            _payload
        );
    }
    function _decodeSendAndCallPayload(bytes memory _payload) internal virtual view returns (bytes32 from, address to, uint64 amountSD, bytes memory payload, uint64 dstGasForCall) {
        require(_payload.toUint8(0) == PT_SEND_AND_CALL, "OFTCore: invalid payload");
        to = _payload.toAddress(13); // drop the first 12 bytes of bytes32
        amountSD = _payload.toUint64(33);
        from = _payload.toBytes32(41);
        dstGasForCall = _payload.toUint64(73);
        payload = _payload.slice(81, _payload.length - 81);
    }
    function _addressToBytes32(address _address) internal pure virtual returns (bytes32) {
        return bytes32(uint(uint160(_address)));
    }
    function _debitFrom(address _from, uint16 _dstChainId, bytes32 _toAddress, uint _amount) internal virtual returns (uint);
    function _creditTo(uint16 _srcChainId, address _toAddress, uint _amount) internal virtual returns (uint);
    function _transferFrom(address _from, address _to, uint _amount) internal virtual returns (uint);
    function _ld2sdRate() internal view virtual returns (uint);
}
// SPDX-License-Identifier: Unlicense
/*
 * @title Solidity Bytes Arrays Utils
 * @author Gonçalo Sá <goncalo.sa@consensys.net>
 *
 * @dev Bytes tightly packed arrays utility library for ethereum contracts written in Solidity.
 *      The library lets you concatenate, slice and type cast bytes arrays both in memory and storage.
 */
pragma solidity >=0.8.0 <0.9.0;
library BytesLib {
    function concat(
        bytes memory _preBytes,
        bytes memory _postBytes
    )
    internal
    pure
    returns (bytes memory)
    {
        bytes memory tempBytes;
        assembly {
        // Get a location of some free memory and store it in tempBytes as
        // Solidity does for memory variables.
            tempBytes := mload(0x40)
        // Store the length of the first bytes array at the beginning of
        // the memory for tempBytes.
            let length := mload(_preBytes)
            mstore(tempBytes, length)
        // Maintain a memory counter for the current write location in the
        // temp bytes array by adding the 32 bytes for the array length to
        // the starting location.
            let mc := add(tempBytes, 0x20)
        // Stop copying when the memory counter reaches the length of the
        // first bytes array.
            let end := add(mc, length)
            for {
            // Initialize a copy counter to the start of the _preBytes data,
            // 32 bytes into its memory.
                let cc := add(_preBytes, 0x20)
            } lt(mc, end) {
            // Increase both counters by 32 bytes each iteration.
                mc := add(mc, 0x20)
                cc := add(cc, 0x20)
            } {
            // Write the _preBytes data into the tempBytes memory 32 bytes
            // at a time.
                mstore(mc, mload(cc))
            }
        // Add the length of _postBytes to the current length of tempBytes
        // and store it as the new length in the first 32 bytes of the
        // tempBytes memory.
            length := mload(_postBytes)
            mstore(tempBytes, add(length, mload(tempBytes)))
        // Move the memory counter back from a multiple of 0x20 to the
        // actual end of the _preBytes data.
            mc := end
        // Stop copying when the memory counter reaches the new combined
        // length of the arrays.
            end := add(mc, length)
            for {
                let cc := add(_postBytes, 0x20)
            } lt(mc, end) {
                mc := add(mc, 0x20)
                cc := add(cc, 0x20)
            } {
                mstore(mc, mload(cc))
            }
        // Update the free-memory pointer by padding our last write location
        // to 32 bytes: add 31 bytes to the end of tempBytes to move to the
        // next 32 byte block, then round down to the nearest multiple of
        // 32. If the sum of the length of the two arrays is zero then add
        // one before rounding down to leave a blank 32 bytes (the length block with 0).
            mstore(0x40, and(
            add(add(end, iszero(add(length, mload(_preBytes)))), 31),
            not(31) // Round down to the nearest 32 bytes.
            ))
        }
        return tempBytes;
    }
    function concatStorage(bytes storage _preBytes, bytes memory _postBytes) internal {
        assembly {
        // Read the first 32 bytes of _preBytes storage, which is the length
        // of the array. (We don't need to use the offset into the slot
        // because arrays use the entire slot.)
            let fslot := sload(_preBytes.slot)
        // Arrays of 31 bytes or less have an even value in their slot,
        // while longer arrays have an odd value. The actual length is
        // the slot divided by two for odd values, and the lowest order
        // byte divided by two for even values.
        // If the slot is even, bitwise and the slot with 255 and divide by
        // two to get the length. If the slot is odd, bitwise and the slot
        // with -1 and divide by two.
            let slength := div(and(fslot, sub(mul(0x100, iszero(and(fslot, 1))), 1)), 2)
            let mlength := mload(_postBytes)
            let newlength := add(slength, mlength)
        // slength can contain both the length and contents of the array
        // if length < 32 bytes so let's prepare for that
        // v. http://solidity.readthedocs.io/en/latest/miscellaneous.html#layout-of-state-variables-in-storage
            switch add(lt(slength, 32), lt(newlength, 32))
            case 2 {
            // Since the new array still fits in the slot, we just need to
            // update the contents of the slot.
            // uint256(bytes_storage) = uint256(bytes_storage) + uint256(bytes_memory) + new_length
                sstore(
                _preBytes.slot,
                // all the modifications to the slot are inside this
                // next block
                add(
                // we can just add to the slot contents because the
                // bytes we want to change are the LSBs
                fslot,
                add(
                mul(
                div(
                // load the bytes from memory
                mload(add(_postBytes, 0x20)),
                // zero all bytes to the right
                exp(0x100, sub(32, mlength))
                ),
                // and now shift left the number of bytes to
                // leave space for the length in the slot
                exp(0x100, sub(32, newlength))
                ),
                // increase length by the double of the memory
                // bytes length
                mul(mlength, 2)
                )
                )
                )
            }
            case 1 {
            // The stored value fits in the slot, but the combined value
            // will exceed it.
            // get the keccak hash to get the contents of the array
                mstore(0x0, _preBytes.slot)
                let sc := add(keccak256(0x0, 0x20), div(slength, 32))
            // save new length
                sstore(_preBytes.slot, add(mul(newlength, 2), 1))
            // The contents of the _postBytes array start 32 bytes into
            // the structure. Our first read should obtain the `submod`
            // bytes that can fit into the unused space in the last word
            // of the stored array. To get this, we read 32 bytes starting
            // from `submod`, so the data we read overlaps with the array
            // contents by `submod` bytes. Masking the lowest-order
            // `submod` bytes allows us to add that value directly to the
            // stored value.
                let submod := sub(32, slength)
                let mc := add(_postBytes, submod)
                let end := add(_postBytes, mlength)
                let mask := sub(exp(0x100, submod), 1)
                sstore(
                sc,
                add(
                and(
                fslot,
                0xffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff00
                ),
                and(mload(mc), mask)
                )
                )
                for {
                    mc := add(mc, 0x20)
                    sc := add(sc, 1)
                } lt(mc, end) {
                    sc := add(sc, 1)
                    mc := add(mc, 0x20)
                } {
                    sstore(sc, mload(mc))
                }
                mask := exp(0x100, sub(mc, end))
                sstore(sc, mul(div(mload(mc), mask), mask))
            }
            default {
            // get the keccak hash to get the contents of the array
                mstore(0x0, _preBytes.slot)
            // Start copying to the last used word of the stored array.
                let sc := add(keccak256(0x0, 0x20), div(slength, 32))
            // save new length
                sstore(_preBytes.slot, add(mul(newlength, 2), 1))
            // Copy over the first `submod` bytes of the new data as in
            // case 1 above.
                let slengthmod := mod(slength, 32)
                let mlengthmod := mod(mlength, 32)
                let submod := sub(32, slengthmod)
                let mc := add(_postBytes, submod)
                let end := add(_postBytes, mlength)
                let mask := sub(exp(0x100, submod), 1)
                sstore(sc, add(sload(sc), and(mload(mc), mask)))
                for {
                    sc := add(sc, 1)
                    mc := add(mc, 0x20)
                } lt(mc, end) {
                    sc := add(sc, 1)
                    mc := add(mc, 0x20)
                } {
                    sstore(sc, mload(mc))
                }
                mask := exp(0x100, sub(mc, end))
                sstore(sc, mul(div(mload(mc), mask), mask))
            }
        }
    }
    function slice(
        bytes memory _bytes,
        uint256 _start,
        uint256 _length
    )
    internal
    pure
    returns (bytes memory)
    {
        require(_length + 31 >= _length, "slice_overflow");
        require(_bytes.length >= _start + _length, "slice_outOfBounds");
        bytes memory tempBytes;
        assembly {
            switch iszero(_length)
            case 0 {
            // Get a location of some free memory and store it in tempBytes as
            // Solidity does for memory variables.
                tempBytes := mload(0x40)
            // The first word of the slice result is potentially a partial
            // word read from the original array. To read it, we calculate
            // the length of that partial word and start copying that many
            // bytes into the array. The first word we copy will start with
            // data we don't care about, but the last `lengthmod` bytes will
            // land at the beginning of the contents of the new array. When
            // we're done copying, we overwrite the full first word with
            // the actual length of the slice.
                let lengthmod := and(_length, 31)
            // The multiplication in the next line is necessary
            // because when slicing multiples of 32 bytes (lengthmod == 0)
            // the following copy loop was copying the origin's length
            // and then ending prematurely not copying everything it should.
                let mc := add(add(tempBytes, lengthmod), mul(0x20, iszero(lengthmod)))
                let end := add(mc, _length)
                for {
                // The multiplication in the next line has the same exact purpose
                // as the one above.
                    let cc := add(add(add(_bytes, lengthmod), mul(0x20, iszero(lengthmod))), _start)
                } lt(mc, end) {
                    mc := add(mc, 0x20)
                    cc := add(cc, 0x20)
                } {
                    mstore(mc, mload(cc))
                }
                mstore(tempBytes, _length)
            //update free-memory pointer
            //allocating the array padded to 32 bytes like the compiler does now
                mstore(0x40, and(add(mc, 31), not(31)))
            }
            //if we want a zero-length slice let's just return a zero-length array
            default {
                tempBytes := mload(0x40)
            //zero out the 32 bytes slice we are about to return
            //we need to do it because Solidity does not garbage collect
                mstore(tempBytes, 0)
                mstore(0x40, add(tempBytes, 0x20))
            }
        }
        return tempBytes;
    }
    function toAddress(bytes memory _bytes, uint256 _start) internal pure returns (address) {
        require(_bytes.length >= _start + 20, "toAddress_outOfBounds");
        address tempAddress;
        assembly {
            tempAddress := div(mload(add(add(_bytes, 0x20), _start)), 0x1000000000000000000000000)
        }
        return tempAddress;
    }
    function toUint8(bytes memory _bytes, uint256 _start) internal pure returns (uint8) {
        require(_bytes.length >= _start + 1 , "toUint8_outOfBounds");
        uint8 tempUint;
        assembly {
            tempUint := mload(add(add(_bytes, 0x1), _start))
        }
        return tempUint;
    }
    function toUint16(bytes memory _bytes, uint256 _start) internal pure returns (uint16) {
        require(_bytes.length >= _start + 2, "toUint16_outOfBounds");
        uint16 tempUint;
        assembly {
            tempUint := mload(add(add(_bytes, 0x2), _start))
        }
        return tempUint;
    }
    function toUint32(bytes memory _bytes, uint256 _start) internal pure returns (uint32) {
        require(_bytes.length >= _start + 4, "toUint32_outOfBounds");
        uint32 tempUint;
        assembly {
            tempUint := mload(add(add(_bytes, 0x4), _start))
        }
        return tempUint;
    }
    function toUint64(bytes memory _bytes, uint256 _start) internal pure returns (uint64) {
        require(_bytes.length >= _start + 8, "toUint64_outOfBounds");
        uint64 tempUint;
        assembly {
            tempUint := mload(add(add(_bytes, 0x8), _start))
        }
        return tempUint;
    }
    function toUint96(bytes memory _bytes, uint256 _start) internal pure returns (uint96) {
        require(_bytes.length >= _start + 12, "toUint96_outOfBounds");
        uint96 tempUint;
        assembly {
            tempUint := mload(add(add(_bytes, 0xc), _start))
        }
        return tempUint;
    }
    function toUint128(bytes memory _bytes, uint256 _start) internal pure returns (uint128) {
        require(_bytes.length >= _start + 16, "toUint128_outOfBounds");
        uint128 tempUint;
        assembly {
            tempUint := mload(add(add(_bytes, 0x10), _start))
        }
        return tempUint;
    }
    function toUint256(bytes memory _bytes, uint256 _start) internal pure returns (uint256) {
        require(_bytes.length >= _start + 32, "toUint256_outOfBounds");
        uint256 tempUint;
        assembly {
            tempUint := mload(add(add(_bytes, 0x20), _start))
        }
        return tempUint;
    }
    function toBytes32(bytes memory _bytes, uint256 _start) internal pure returns (bytes32) {
        require(_bytes.length >= _start + 32, "toBytes32_outOfBounds");
        bytes32 tempBytes32;
        assembly {
            tempBytes32 := mload(add(add(_bytes, 0x20), _start))
        }
        return tempBytes32;
    }
    function equal(bytes memory _preBytes, bytes memory _postBytes) internal pure returns (bool) {
        bool success = true;
        assembly {
            let length := mload(_preBytes)
        // if lengths don't match the arrays are not equal
            switch eq(length, mload(_postBytes))
            case 1 {
            // cb is a circuit breaker in the for loop since there's
            //  no said feature for inline assembly loops
            // cb = 1 - don't breaker
            // cb = 0 - break
                let cb := 1
                let mc := add(_preBytes, 0x20)
                let end := add(mc, length)
                for {
                    let cc := add(_postBytes, 0x20)
                // the next line is the loop condition:
                // while(uint256(mc < end) + cb == 2)
                } eq(add(lt(mc, end), cb), 2) {
                    mc := add(mc, 0x20)
                    cc := add(cc, 0x20)
                } {
                // if any of these checks fails then arrays are not equal
                    if iszero(eq(mload(mc), mload(cc))) {
                    // unsuccess:
                        success := 0
                        cb := 0
                    }
                }
            }
            default {
            // unsuccess:
                success := 0
            }
        }
        return success;
    }
    function equalStorage(
        bytes storage _preBytes,
        bytes memory _postBytes
    )
    internal
    view
    returns (bool)
    {
        bool success = true;
        assembly {
        // we know _preBytes_offset is 0
            let fslot := sload(_preBytes.slot)
        // Decode the length of the stored array like in concatStorage().
            let slength := div(and(fslot, sub(mul(0x100, iszero(and(fslot, 1))), 1)), 2)
            let mlength := mload(_postBytes)
        // if lengths don't match the arrays are not equal
            switch eq(slength, mlength)
            case 1 {
            // slength can contain both the length and contents of the array
            // if length < 32 bytes so let's prepare for that
            // v. http://solidity.readthedocs.io/en/latest/miscellaneous.html#layout-of-state-variables-in-storage
                if iszero(iszero(slength)) {
                    switch lt(slength, 32)
                    case 1 {
                    // blank the last byte which is the length
                        fslot := mul(div(fslot, 0x100), 0x100)
                        if iszero(eq(fslot, mload(add(_postBytes, 0x20)))) {
                        // unsuccess:
                            success := 0
                        }
                    }
                    default {
                    // cb is a circuit breaker in the for loop since there's
                    //  no said feature for inline assembly loops
                    // cb = 1 - don't breaker
                    // cb = 0 - break
                        let cb := 1
                    // get the keccak hash to get the contents of the array
                        mstore(0x0, _preBytes.slot)
                        let sc := keccak256(0x0, 0x20)
                        let mc := add(_postBytes, 0x20)
                        let end := add(mc, mlength)
                    // the next line is the loop condition:
                    // while(uint256(mc < end) + cb == 2)
                        for {} eq(add(lt(mc, end), cb), 2) {
                            sc := add(sc, 1)
                            mc := add(mc, 0x20)
                        } {
                            if iszero(eq(sload(sc), mload(mc))) {
                            // unsuccess:
                                success := 0
                                cb := 0
                            }
                        }
                    }
                }
            }
            default {
            // unsuccess:
                success := 0
            }
        }
        return success;
    }
}
// SPDX-License-Identifier: MIT OR Apache-2.0
pragma solidity >=0.7.6;
library ExcessivelySafeCall {
    uint256 constant LOW_28_MASK =
    0x00000000ffffffffffffffffffffffffffffffffffffffffffffffffffffffff;
    /// @notice Use when you _really_ really _really_ don't trust the called
    /// contract. This prevents the called contract from causing reversion of
    /// the caller in as many ways as we can.
    /// @dev The main difference between this and a solidity low-level call is
    /// that we limit the number of bytes that the callee can cause to be
    /// copied to caller memory. This prevents stupid things like malicious
    /// contracts returning 10,000,000 bytes causing a local OOG when copying
    /// to memory.
    /// @param _target The address to call
    /// @param _gas The amount of gas to forward to the remote contract
    /// @param _maxCopy The maximum number of bytes of returndata to copy
    /// to memory.
    /// @param _calldata The data to send to the remote contract
    /// @return success and returndata, as `.call()`. Returndata is capped to
    /// `_maxCopy` bytes.
    function excessivelySafeCall(
        address _target,
        uint256 _gas,
        uint16 _maxCopy,
        bytes memory _calldata
    ) internal returns (bool, bytes memory) {
        // set up for assembly call
        uint256 _toCopy;
        bool _success;
        bytes memory _returnData = new bytes(_maxCopy);
        // dispatch message to recipient
        // by assembly calling "handle" function
        // we call via assembly to avoid memcopying a very large returndata
        // returned by a malicious contract
        assembly {
            _success := call(
            _gas, // gas
            _target, // recipient
            0, // ether value
            add(_calldata, 0x20), // inloc
            mload(_calldata), // inlen
            0, // outloc
            0 // outlen
            )
        // limit our copy to 256 bytes
            _toCopy := returndatasize()
            if gt(_toCopy, _maxCopy) {
                _toCopy := _maxCopy
            }
        // Store the length of the copied bytes
            mstore(_returnData, _toCopy)
        // copy the bytes from returndata[0:_toCopy]
            returndatacopy(add(_returnData, 0x20), 0, _toCopy)
        }
        return (_success, _returnData);
    }
    /// @notice Use when you _really_ really _really_ don't trust the called
    /// contract. This prevents the called contract from causing reversion of
    /// the caller in as many ways as we can.
    /// @dev The main difference between this and a solidity low-level call is
    /// that we limit the number of bytes that the callee can cause to be
    /// copied to caller memory. This prevents stupid things like malicious
    /// contracts returning 10,000,000 bytes causing a local OOG when copying
    /// to memory.
    /// @param _target The address to call
    /// @param _gas The amount of gas to forward to the remote contract
    /// @param _maxCopy The maximum number of bytes of returndata to copy
    /// to memory.
    /// @param _calldata The data to send to the remote contract
    /// @return success and returndata, as `.call()`. Returndata is capped to
    /// `_maxCopy` bytes.
    function excessivelySafeStaticCall(
        address _target,
        uint256 _gas,
        uint16 _maxCopy,
        bytes memory _calldata
    ) internal view returns (bool, bytes memory) {
        // set up for assembly call
        uint256 _toCopy;
        bool _success;
        bytes memory _returnData = new bytes(_maxCopy);
        // dispatch message to recipient
        // by assembly calling "handle" function
        // we call via assembly to avoid memcopying a very large returndata
        // returned by a malicious contract
        assembly {
            _success := staticcall(
            _gas, // gas
            _target, // recipient
            add(_calldata, 0x20), // inloc
            mload(_calldata), // inlen
            0, // outloc
            0 // outlen
            )
        // limit our copy to 256 bytes
            _toCopy := returndatasize()
            if gt(_toCopy, _maxCopy) {
                _toCopy := _maxCopy
            }
        // Store the length of the copied bytes
            mstore(_returnData, _toCopy)
        // copy the bytes from returndata[0:_toCopy]
            returndatacopy(add(_returnData, 0x20), 0, _toCopy)
        }
        return (_success, _returnData);
    }
    /**
     * @notice Swaps function selectors in encoded contract calls
     * @dev Allows reuse of encoded calldata for functions with identical
     * argument types but different names. It simply swaps out the first 4 bytes
     * for the new selector. This function modifies memory in place, and should
     * only be used with caution.
     * @param _newSelector The new 4-byte selector
     * @param _buf The encoded contract args
     */
    function swapSelector(bytes4 _newSelector, bytes memory _buf)
    internal
    pure
    {
        require(_buf.length >= 4);
        uint256 _mask = LOW_28_MASK;
        assembly {
        // load the first word of
            let _word := mload(add(_buf, 0x20))
        // mask out the top 4 bytes
        // /x
            _word := and(_word, _mask)
            _word := or(_newSelector, _word)
            mstore(add(_buf, 0x20), _word)
        }
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (access/Ownable.sol)
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;
    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }
    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }
    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }
    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }
    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby disabling any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }
    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }
    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/extensions/IERC20Permit.sol)
pragma solidity ^0.8.0;
/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;
    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);
    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/IERC20.sol)
pragma solidity ^0.8.0;
/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);
    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);
    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);
    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);
    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);
    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);
    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 amount) external returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/utils/SafeERC20.sol)
pragma solidity ^0.8.0;
import "../IERC20.sol";
import "../extensions/IERC20Permit.sol";
import "../../../utils/Address.sol";
/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;
    /**
     * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }
    /**
     * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
     * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
     */
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }
    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }
    /**
     * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 oldAllowance = token.allowance(address(this), spender);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance + value));
    }
    /**
     * @dev Decrease the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance - value));
        }
    }
    /**
     * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful. Compatible with tokens that require the approval to be set to
     * 0 before setting it to a non-zero value.
     */
    function forceApprove(IERC20 token, address spender, uint256 value) internal {
        bytes memory approvalCall = abi.encodeWithSelector(token.approve.selector, spender, value);
        if (!_callOptionalReturnBool(token, approvalCall)) {
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, 0));
            _callOptionalReturn(token, approvalCall);
        }
    }
    /**
     * @dev Use a ERC-2612 signature to set the `owner` approval toward `spender` on `token`.
     * Revert on invalid signature.
     */
    function safePermit(
        IERC20Permit token,
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        uint256 nonceBefore = token.nonces(owner);
        token.permit(owner, spender, value, deadline, v, r, s);
        uint256 nonceAfter = token.nonces(owner);
        require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
    }
    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.
        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        require(returndata.length == 0 || abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
    }
    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     *
     * This is a variant of {_callOptionalReturn} that silents catches all reverts and returns a bool instead.
     */
    function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We cannot use {Address-functionCall} here since this should return false
        // and not revert is the subcall reverts.
        (bool success, bytes memory returndata) = address(token).call(data);
        return
            success && (returndata.length == 0 || abi.decode(returndata, (bool))) && Address.isContract(address(token));
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     *
     * Furthermore, `isContract` will also return true if the target contract within
     * the same transaction is already scheduled for destruction by `SELFDESTRUCT`,
     * which only has an effect at the end of a transaction.
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.
        return account.code.length > 0;
    }
    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.0/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");
        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }
    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }
    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }
    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }
    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }
    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }
    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 *
 * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "@layerzerolabs/solidity-examples/contracts/token/oft/v2/fee/ProxyOFTWithFee.sol";
contract WNCGProxyOFT is ProxyOFTWithFee {
  constructor(address _token, uint8 _sharedDecimals, address _lzEndpoint)
    ProxyOFTWithFee(_token, _sharedDecimals, _lzEndpoint) {
  }
}

{"Buffer.sol":{"content":"// SPDX-License-Identifier: BUSL-1.1\n\n// https://github.com/ensdomains/buffer\n\npragma solidity ^0.7.0;\n\n/**\n * @dev A library for working with mutable byte buffers in Solidity.\n *\n * Byte buffers are mutable and expandable, and provide a variety of primitives\n * for writing to them. At any time you can fetch a bytes object containing the\n * current contents of the buffer. The bytes object should not be stored between\n * operations, as it may change due to resizing of the buffer.\n */\nlibrary Buffer {\n    /**\n     * @dev Represents a mutable buffer. Buffers have a current value (buf) and\n     *      a capacity. The capacity may be longer than the current value, in\n     *      which case it can be extended without the need to allocate more memory.\n     */\n    struct buffer {\n        bytes buf;\n        uint capacity;\n    }\n\n    /**\n     * @dev Initializes a buffer with an initial capacity.a co\n     * @param buf The buffer to initialize.\n     * @param capacity The number of bytes of space to allocate the buffer.\n     * @return The buffer, for chaining.\n     */\n    function init(buffer memory buf, uint capacity) internal pure returns (buffer memory) {\n        if (capacity % 32 != 0) {\n            capacity += 32 - (capacity % 32);\n        }\n        // Allocate space for the buffer data\n        buf.capacity = capacity;\n        assembly {\n            let ptr := mload(0x40)\n            mstore(buf, ptr)\n            mstore(ptr, 0)\n            mstore(0x40, add(32, add(ptr, capacity)))\n        }\n        return buf;\n    }\n\n\n    /**\n     * @dev Writes a byte string to a buffer. Resizes if doing so would exceed\n     *      the capacity of the buffer.\n     * @param buf The buffer to append to.\n     * @param off The start offset to write to.\n     * @param rawData The data to append.\n     * @param len The number of bytes to copy.\n     * @return The original buffer, for chaining.\n     */\n    function writeRawBytes(\n        buffer memory buf,\n        uint off,\n        bytes memory rawData,\n        uint offData,\n        uint len\n    ) internal pure returns (buffer memory) {\n        if (off + len \u003e buf.capacity) {\n            resize(buf, max(buf.capacity, len + off) * 2);\n        }\n\n        uint dest;\n        uint src;\n        assembly {\n            // Memory address of the buffer data\n            let bufptr := mload(buf)\n            // Length of existing buffer data\n            let buflen := mload(bufptr)\n            // Start address = buffer address + offset + sizeof(buffer length)\n            dest := add(add(bufptr, 32), off)\n            // Update buffer length if we\u0027re extending it\n            if gt(add(len, off), buflen) {\n                mstore(bufptr, add(len, off))\n            }\n            src := add(rawData, offData)\n        }\n\n        // Copy word-length chunks while possible\n        for (; len \u003e= 32; len -= 32) {\n            assembly {\n                mstore(dest, mload(src))\n            }\n            dest += 32;\n            src += 32;\n        }\n\n        // Copy remaining bytes\n        uint mask = 256**(32 - len) - 1;\n        assembly {\n            let srcpart := and(mload(src), not(mask))\n            let destpart := and(mload(dest), mask)\n            mstore(dest, or(destpart, srcpart))\n        }\n\n        return buf;\n    }\n\n    /**\n     * @dev Writes a byte string to a buffer. Resizes if doing so would exceed\n     *      the capacity of the buffer.\n     * @param buf The buffer to append to.\n     * @param off The start offset to write to.\n     * @param data The data to append.\n     * @param len The number of bytes to copy.\n     * @return The original buffer, for chaining.\n     */\n    function write(buffer memory buf, uint off, bytes memory data, uint len) internal pure returns (buffer memory) {\n        require(len \u003c= data.length);\n\n        if (off + len \u003e buf.capacity) {\n            resize(buf, max(buf.capacity, len + off) * 2);\n        }\n\n        uint dest;\n        uint src;\n        assembly {\n        // Memory address of the buffer data\n            let bufptr := mload(buf)\n        // Length of existing buffer data\n            let buflen := mload(bufptr)\n        // Start address = buffer address + offset + sizeof(buffer length)\n            dest := add(add(bufptr, 32), off)\n        // Update buffer length if we\u0027re extending it\n            if gt(add(len, off), buflen) {\n                mstore(bufptr, add(len, off))\n            }\n            src := add(data, 32)\n        }\n\n        // Copy word-length chunks while possible\n        for (; len \u003e= 32; len -= 32) {\n            assembly {\n                mstore(dest, mload(src))\n            }\n            dest += 32;\n            src += 32;\n        }\n\n        // Copy remaining bytes\n        uint mask = 256**(32 - len) - 1;\n        assembly {\n            let srcpart := and(mload(src), not(mask))\n            let destpart := and(mload(dest), mask)\n            mstore(dest, or(destpart, srcpart))\n        }\n\n        return buf;\n    }\n\n    function append(buffer memory buf, bytes memory data) internal pure returns (buffer memory) {\n        return write(buf, buf.buf.length, data, data.length);\n    }\n\n    function resize(buffer memory buf, uint capacity) private pure {\n        bytes memory oldbuf = buf.buf;\n        init(buf, capacity);\n        append(buf, oldbuf);\n    }\n\n    function max(uint a, uint b) private pure returns (uint) {\n        if (a \u003e b) {\n            return a;\n        }\n        return b;\n    }\n}\n"},"FPValidator.sol":{"content":"// SPDX-License-Identifier: BUSL-1.1\n\npragma solidity 0.7.6;\npragma abicoder v2;\n\nimport \"./LayerZeroPacket.sol\";\nimport \"./ILayerZeroValidationLibrary.sol\";\nimport \"./IValidationLibraryHelperV2.sol\";\n\ninterface IStargate {\n    // Stargate objects for abi encoding / decoding\n    struct SwapObj {\n        uint amount;\n        uint eqFee;\n        uint eqReward;\n        uint lpFee;\n        uint protocolFee;\n        uint lkbRemove;\n    }\n\n    struct CreditObj {\n        uint credits;\n        uint idealBalance;\n    }\n}\n\ncontract FPValidator is ILayerZeroValidationLibrary, IValidationLibraryHelperV2 {\n    uint8 public proofType = 2;\n    uint8 public utilsVersion = 1;\n\n    address public immutable stargateBridgeAddress;\n    address public immutable stargateTokenAddress;\n\n    constructor(address _stargateBridgeAddress, address _stargateTokenAddress) {\n        stargateBridgeAddress = _stargateBridgeAddress;\n        stargateTokenAddress = _stargateTokenAddress;\n    }\n\n    function validateProof(bytes32 _packetHash, bytes calldata _transactionProof, uint _remoteAddressSize) external view override returns (LayerZeroPacket.Packet memory packet) {\n        require(_remoteAddressSize \u003e 0, \"ProofLib: invalid address size\");\n        // _transactionProof = srcUlnAddress (32 bytes) + lzPacket\n        require(_transactionProof.length \u003e 32 \u0026\u0026 keccak256(_transactionProof) == _packetHash, \"ProofLib: invalid transaction proof\");\n\n        bytes memory ulnAddressBytes = bytes(_transactionProof[0:32]);\n        bytes32 ulnAddress;\n        assembly {\n            ulnAddress := mload(add(ulnAddressBytes, 32))\n        }\n        packet = LayerZeroPacket.getPacketV3(_transactionProof[32:], _remoteAddressSize, ulnAddress);\n\n        if (packet.dstAddress == stargateBridgeAddress) packet.payload = _secureStgPayload(packet.payload);\n        if (packet.dstAddress == stargateTokenAddress) packet.payload = _secureStgTokenPayload(packet.payload);\n\n        return packet;\n    }\n\n    function _secureStgTokenPayload(bytes memory _payload) internal pure returns (bytes memory) {\n        (bytes memory toAddressBytes, uint qty) = abi.decode(_payload, (bytes, uint));\n\n        address toAddress = address(0);\n        if (toAddressBytes.length \u003e 0) {\n            assembly {\n                toAddress := mload(add(toAddressBytes, 20))\n            }\n        }\n\n        if (toAddress == address(0)) {\n            address deadAddress = address(0x000000000000000000000000000000000000dEaD);\n            bytes memory newToAddressBytes = abi.encodePacked(deadAddress);\n            return abi.encode(newToAddressBytes, qty);\n        }\n\n        // default to return the original payload\n        return _payload;\n    }\n\n    function _secureStgPayload(bytes memory _payload) internal view returns (bytes memory) {\n        // functionType is uint8 even though the encoding will take up the side of uint256\n        uint8 functionType;\n        assembly {\n            functionType := mload(add(_payload, 32))\n        }\n\n        // TYPE_SWAP_REMOTE == 1 \u0026\u0026 only if the payload has a payload\n        // only swapRemote inside of stargate can call sgReceive on an user supplied to address\n        // thus we do not care about the other type functions even if the toAddress is overly long.\n        if (functionType == 1) {\n            // decode the _payload with its types\n            (, uint srcPoolId, uint dstPoolId, uint dstGasForCall, IStargate.CreditObj memory c, IStargate.SwapObj memory s, bytes memory toAddressBytes, bytes memory contractCallPayload) = abi.decode(_payload, (uint8, uint, uint, uint, IStargate.CreditObj, IStargate.SwapObj, bytes, bytes));\n\n            // if contractCallPayload.length \u003e 0 need to check if the to address is a contract or not\n            if (contractCallPayload.length \u003e 0) {\n                // otherwise, need to check if the payload can be delivered to the toAddress\n                address toAddress = address(0);\n                if (toAddressBytes.length \u003e 0) {\n                    assembly {\n                        toAddress := mload(add(toAddressBytes, 20))\n                    }\n                }\n\n                // check if the toAddress is a contract. We are not concerned about addresses that pretend to be wallets. because worst case we just delete their payload if being malicious\n                // we can guarantee that if a size \u003e 0, then the contract is definitely a contract address in this context\n                uint size;\n                assembly {\n                    size := extcodesize(toAddress)\n                }\n\n                if (size == 0) {\n                    // size == 0 indicates its not a contract, payload wont be delivered\n                    // secure the _payload to make sure funds can be delivered to the toAddress\n                    bytes memory newToAddressBytes = abi.encodePacked(toAddress);\n                    bytes memory securePayload = abi.encode(functionType, srcPoolId, dstPoolId, dstGasForCall, c, s, newToAddressBytes, bytes(\"\"));\n                    return securePayload;\n                }\n            }\n        }\n\n        // default to return the original payload\n        return _payload;\n    }\n\n    function secureStgTokenPayload(bytes memory _payload) external pure returns (bytes memory) {\n        return _secureStgTokenPayload(_payload);\n    }\n\n    function secureStgPayload(bytes memory _payload) external view returns (bytes memory) {\n        return _secureStgPayload(_payload);\n    }\n\n    function getUtilsVersion() external view override returns (uint8) {\n        return utilsVersion;\n    }\n\n    function getProofType() external view override returns (uint8) {\n        return proofType;\n    }\n\n    function getVerifyLog(bytes32, uint[] calldata, uint, bytes[] calldata proof) external pure override returns (ULNLog memory log) {}\n\n    function getPacket(bytes memory data, uint sizeOfSrcAddress, bytes32 ulnAddress) external pure override returns (LayerZeroPacket.Packet memory) {\n        return LayerZeroPacket.getPacketV3(data, sizeOfSrcAddress, ulnAddress);\n    }\n}\n"},"ILayerZeroValidationLibrary.sol":{"content":"// SPDX-License-Identifier: BUSL-1.1\n\npragma solidity \u003e=0.7.0;\npragma abicoder v2;\n\nimport \"./LayerZeroPacket.sol\";\n\ninterface ILayerZeroValidationLibrary {\n    function validateProof(bytes32 blockData, bytes calldata _data, uint _remoteAddressSize) external returns (LayerZeroPacket.Packet memory packet);\n}\n"},"IValidationLibraryHelperV2.sol":{"content":"// SPDX-License-Identifier: BUSL-1.1\n\npragma solidity \u003e=0.7.0;\npragma abicoder v2;\n\nimport \"./LayerZeroPacket.sol\";\n\ninterface IValidationLibraryHelperV2 {\n    struct ULNLog {\n        bytes32 contractAddress;\n        bytes32 topicZeroSig;\n        bytes data;\n    }\n\n    function getVerifyLog(bytes32 hashRoot, uint[] calldata receiptSlotIndex, uint logIndex, bytes[] calldata proof) external pure returns (ULNLog memory);\n\n    function getPacket(bytes calldata data, uint sizeOfSrcAddress, bytes32 ulnAddress) external pure returns (LayerZeroPacket.Packet memory);\n\n    function getUtilsVersion() external view returns (uint8);\n\n    function getProofType() external view returns (uint8);\n}\n"},"LayerZeroPacket.sol":{"content":"// SPDX-License-Identifier: BUSL-1.1\n\npragma solidity 0.7.6;\n\nimport \"./Buffer.sol\";\nimport \"./SafeMath.sol\";\n\nlibrary LayerZeroPacket {\n    using Buffer for Buffer.buffer;\n    using SafeMath for uint;\n\n    struct Packet {\n        uint16 srcChainId;\n        uint16 dstChainId;\n        uint64 nonce;\n        address dstAddress;\n        bytes srcAddress;\n        bytes32 ulnAddress;\n        bytes payload;\n    }\n\n    function getPacket(\n        bytes memory data,\n        uint16 srcChain,\n        uint sizeOfSrcAddress,\n        bytes32 ulnAddress\n    ) internal pure returns (LayerZeroPacket.Packet memory) {\n        uint16 dstChainId;\n        address dstAddress;\n        uint size;\n        uint64 nonce;\n\n        // The log consists of the destination chain id and then a bytes payload\n        //      0--------------------------------------------31\n        // 0   |  total bytes size\n        // 32  |  destination chain id\n        // 64  |  bytes offset\n        // 96  |  bytes array size\n        // 128 |  payload\n        assembly {\n            dstChainId := mload(add(data, 32))\n            size := mload(add(data, 96)) /// size of the byte array\n            nonce := mload(add(data, 104)) // offset to convert to uint64  128  is index -24\n            dstAddress := mload(add(data, sub(add(128, sizeOfSrcAddress), 4))) // offset to convert to address 12 -8\n        }\n\n        Buffer.buffer memory srcAddressBuffer;\n        srcAddressBuffer.init(sizeOfSrcAddress);\n        srcAddressBuffer.writeRawBytes(0, data, 136, sizeOfSrcAddress); // 128 + 8\n\n        uint payloadSize = size.sub(28).sub(sizeOfSrcAddress);\n        Buffer.buffer memory payloadBuffer;\n        payloadBuffer.init(payloadSize);\n        payloadBuffer.writeRawBytes(0, data, sizeOfSrcAddress.add(156), payloadSize); // 148 + 8\n        return LayerZeroPacket.Packet(srcChain, dstChainId, nonce, dstAddress, srcAddressBuffer.buf, ulnAddress, payloadBuffer.buf);\n    }\n\n    function getPacketV2(\n        bytes memory data,\n        uint sizeOfSrcAddress,\n        bytes32 ulnAddress\n    ) internal pure returns (LayerZeroPacket.Packet memory) {\n        // packet def: abi.encodePacked(nonce, srcChain, srcAddress, dstChain, dstAddress, payload);\n        // data def: abi.encode(packet) = offset(32) + length(32) + packet\n        //              if from EVM\n        // 0 - 31       0 - 31          |  total bytes size\n        // 32 - 63      32 - 63         |  location\n        // 64 - 95      64 - 95         |  size of the packet\n        // 96 - 103     96 - 103        |  nonce\n        // 104 - 105    104 - 105       |  srcChainId\n        // 106 - P      106 - 125       |  srcAddress, where P = 106 + sizeOfSrcAddress - 1,\n        // P+1 - P+2    126 - 127       |  dstChainId\n        // P+3 - P+22   128 - 147       |  dstAddress\n        // P+23 - END   148 - END       |  payload\n\n        // decode the packet\n        uint256 realSize;\n        uint64 nonce;\n        uint16 srcChain;\n        uint16 dstChain;\n        address dstAddress;\n        assembly {\n            realSize := mload(add(data, 64))\n            nonce := mload(add(data, 72)) // 104 - 32\n            srcChain := mload(add(data, 74)) // 106 - 32\n            dstChain := mload(add(data, add(76, sizeOfSrcAddress))) // P + 3 - 32 = 105 + size + 3 - 32 = 76 + size\n            dstAddress := mload(add(data, add(96, sizeOfSrcAddress))) // P + 23 - 32 = 105 + size + 23 - 32 = 96 + size\n        }\n\n        require(srcChain != 0, \"LayerZeroPacket: invalid packet\");\n\n        Buffer.buffer memory srcAddressBuffer;\n        srcAddressBuffer.init(sizeOfSrcAddress);\n        srcAddressBuffer.writeRawBytes(0, data, 106, sizeOfSrcAddress);\n\n        uint nonPayloadSize = sizeOfSrcAddress.add(32);// 2 + 2 + 8 + 20, 32 + 20 = 52 if sizeOfSrcAddress == 20\n        uint payloadSize = realSize.sub(nonPayloadSize);\n        Buffer.buffer memory payloadBuffer;\n        payloadBuffer.init(payloadSize);\n        payloadBuffer.writeRawBytes(0, data, nonPayloadSize.add(96), payloadSize);\n\n        return LayerZeroPacket.Packet(srcChain, dstChain, nonce, dstAddress, srcAddressBuffer.buf, ulnAddress, payloadBuffer.buf);\n    }\n\n    function getPacketV3(\n        bytes memory data,\n        uint sizeOfSrcAddress,\n        bytes32 ulnAddress\n    ) internal pure returns (LayerZeroPacket.Packet memory) {\n        // data def: abi.encodePacked(nonce, srcChain, srcAddress, dstChain, dstAddress, payload);\n        //              if from EVM\n        // 0 - 31       0 - 31          |  total bytes size\n        // 32 - 39      32 - 39         |  nonce\n        // 40 - 41      40 - 41         |  srcChainId\n        // 42 - P       42 - 61         |  srcAddress, where P = 41 + sizeOfSrcAddress,\n        // P+1 - P+2    62 - 63         |  dstChainId\n        // P+3 - P+22   64 - 83         |  dstAddress\n        // P+23 - END   84 - END        |  payload\n\n        // decode the packet\n        uint256 realSize = data.length;\n        uint nonPayloadSize = sizeOfSrcAddress.add(32);// 2 + 2 + 8 + 20, 32 + 20 = 52 if sizeOfSrcAddress == 20\n        require(realSize \u003e= nonPayloadSize, \"LayerZeroPacket: invalid packet\");\n        uint payloadSize = realSize - nonPayloadSize;\n\n        uint64 nonce;\n        uint16 srcChain;\n        uint16 dstChain;\n        address dstAddress;\n        assembly {\n            nonce := mload(add(data, 8)) // 40 - 32\n            srcChain := mload(add(data, 10)) // 42 - 32\n            dstChain := mload(add(data, add(12, sizeOfSrcAddress))) // P + 3 - 32 = 41 + size + 3 - 32 = 12 + size\n            dstAddress := mload(add(data, add(32, sizeOfSrcAddress))) // P + 23 - 32 = 41 + size + 23 - 32 = 32 + size\n        }\n\n        require(srcChain != 0, \"LayerZeroPacket: invalid packet\");\n\n        Buffer.buffer memory srcAddressBuffer;\n        srcAddressBuffer.init(sizeOfSrcAddress);\n        srcAddressBuffer.writeRawBytes(0, data, 42, sizeOfSrcAddress);\n\n        Buffer.buffer memory payloadBuffer;\n        if (payloadSize \u003e 0) {\n            payloadBuffer.init(payloadSize);\n            payloadBuffer.writeRawBytes(0, data, nonPayloadSize.add(32), payloadSize);\n        }\n\n        return LayerZeroPacket.Packet(srcChain, dstChain, nonce, dstAddress, srcAddressBuffer.buf, ulnAddress, payloadBuffer.buf);\n    }\n}\n"},"SafeMath.sol":{"content":"// SPDX-License-Identifier: MIT\n\npragma solidity ^0.7.0;\n\n/**\n * @dev Wrappers over Solidity\u0027s arithmetic operations with added overflow\n * checks.\n *\n * Arithmetic operations in Solidity wrap on overflow. This can easily result\n * in bugs, because programmers usually assume that an overflow raises an\n * error, which is the standard behavior in high level programming languages.\n * `SafeMath` restores this intuition by reverting the transaction when an\n * operation overflows.\n *\n * Using this library instead of the unchecked operations eliminates an entire\n * class of bugs, so it\u0027s recommended to use it always.\n */\nlibrary SafeMath {\n    /**\n     * @dev Returns the addition of two unsigned integers, with an overflow flag.\n     *\n     * _Available since v3.4._\n     */\n    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        uint256 c = a + b;\n        if (c \u003c a) return (false, 0);\n        return (true, c);\n    }\n\n    /**\n     * @dev Returns the substraction of two unsigned integers, with an overflow flag.\n     *\n     * _Available since v3.4._\n     */\n    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        if (b \u003e a) return (false, 0);\n        return (true, a - b);\n    }\n\n    /**\n     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.\n     *\n     * _Available since v3.4._\n     */\n    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        // Gas optimization: this is cheaper than requiring \u0027a\u0027 not being zero, but the\n        // benefit is lost if \u0027b\u0027 is also tested.\n        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522\n        if (a == 0) return (true, 0);\n        uint256 c = a * b;\n        if (c / a != b) return (false, 0);\n        return (true, c);\n    }\n\n    /**\n     * @dev Returns the division of two unsigned integers, with a division by zero flag.\n     *\n     * _Available since v3.4._\n     */\n    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        if (b == 0) return (false, 0);\n        return (true, a / b);\n    }\n\n    /**\n     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.\n     *\n     * _Available since v3.4._\n     */\n    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        if (b == 0) return (false, 0);\n        return (true, a % b);\n    }\n\n    /**\n     * @dev Returns the addition of two unsigned integers, reverting on\n     * overflow.\n     *\n     * Counterpart to Solidity\u0027s `+` operator.\n     *\n     * Requirements:\n     *\n     * - Addition cannot overflow.\n     */\n    function add(uint256 a, uint256 b) internal pure returns (uint256) {\n        uint256 c = a + b;\n        require(c \u003e= a, \"SafeMath: addition overflow\");\n        return c;\n    }\n\n    /**\n     * @dev Returns the subtraction of two unsigned integers, reverting on\n     * overflow (when the result is negative).\n     *\n     * Counterpart to Solidity\u0027s `-` operator.\n     *\n     * Requirements:\n     *\n     * - Subtraction cannot overflow.\n     */\n    function sub(uint256 a, uint256 b) internal pure returns (uint256) {\n        require(b \u003c= a, \"SafeMath: subtraction overflow\");\n        return a - b;\n    }\n\n    /**\n     * @dev Returns the multiplication of two unsigned integers, reverting on\n     * overflow.\n     *\n     * Counterpart to Solidity\u0027s `*` operator.\n     *\n     * Requirements:\n     *\n     * - Multiplication cannot overflow.\n     */\n    function mul(uint256 a, uint256 b) internal pure returns (uint256) {\n        if (a == 0) return 0;\n        uint256 c = a * b;\n        require(c / a == b, \"SafeMath: multiplication overflow\");\n        return c;\n    }\n\n    /**\n     * @dev Returns the integer division of two unsigned integers, reverting on\n     * division by zero. The result is rounded towards zero.\n     *\n     * Counterpart to Solidity\u0027s `/` operator. Note: this function uses a\n     * `revert` opcode (which leaves remaining gas untouched) while Solidity\n     * uses an invalid opcode to revert (consuming all remaining gas).\n     *\n     * Requirements:\n     *\n     * - The divisor cannot be zero.\n     */\n    function div(uint256 a, uint256 b) internal pure returns (uint256) {\n        require(b \u003e 0, \"SafeMath: division by zero\");\n        return a / b;\n    }\n\n    /**\n     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),\n     * reverting when dividing by zero.\n     *\n     * Counterpart to Solidity\u0027s `%` operator. This function uses a `revert`\n     * opcode (which leaves remaining gas untouched) while Solidity uses an\n     * invalid opcode to revert (consuming all remaining gas).\n     *\n     * Requirements:\n     *\n     * - The divisor cannot be zero.\n     */\n    function mod(uint256 a, uint256 b) internal pure returns (uint256) {\n        require(b \u003e 0, \"SafeMath: modulo by zero\");\n        return a % b;\n    }\n\n    /**\n     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on\n     * overflow (when the result is negative).\n     *\n     * CAUTION: This function is deprecated because it requires allocating memory for the error\n     * message unnecessarily. For custom revert reasons use {trySub}.\n     *\n     * Counterpart to Solidity\u0027s `-` operator.\n     *\n     * Requirements:\n     *\n     * - Subtraction cannot overflow.\n     */\n    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {\n        require(b \u003c= a, errorMessage);\n        return a - b;\n    }\n\n    /**\n     * @dev Returns the integer division of two unsigned integers, reverting with custom message on\n     * division by zero. The result is rounded towards zero.\n     *\n     * CAUTION: This function is deprecated because it requires allocating memory for the error\n     * message unnecessarily. For custom revert reasons use {tryDiv}.\n     *\n     * Counterpart to Solidity\u0027s `/` operator. Note: this function uses a\n     * `revert` opcode (which leaves remaining gas untouched) while Solidity\n     * uses an invalid opcode to revert (consuming all remaining gas).\n     *\n     * Requirements:\n     *\n     * - The divisor cannot be zero.\n     */\n    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {\n        require(b \u003e 0, errorMessage);\n        return a / b;\n    }\n\n    /**\n     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),\n     * reverting with custom message when dividing by zero.\n     *\n     * CAUTION: This function is deprecated because it requires allocating memory for the error\n     * message unnecessarily. For custom revert reasons use {tryMod}.\n     *\n     * Counterpart to Solidity\u0027s `%` operator. This function uses a `revert`\n     * opcode (which leaves remaining gas untouched) while Solidity uses an\n     * invalid opcode to revert (consuming all remaining gas).\n     *\n     * Requirements:\n     *\n     * - The divisor cannot be zero.\n     */\n    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {\n        require(b \u003e 0, errorMessage);\n        return a % b;\n    }\n}\n"}}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.7.6;
import "./interfaces/ILayerZeroReceiver.sol";
import "./interfaces/ILayerZeroEndpoint.sol";
import "./interfaces/ILayerZeroMessagingLibrary.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
contract Endpoint is Ownable, ILayerZeroEndpoint {
    uint16 public immutable chainId;
    // installed libraries and reserved versions
    uint16 public constant BLOCK_VERSION = 65535;
    uint16 public constant DEFAULT_VERSION = 0;
    uint16 public latestVersion;
    mapping(uint16 => ILayerZeroMessagingLibrary) public libraryLookup; // version -> ILayerZeroEndpointLibrary
    // default send/receive libraries
    uint16 public defaultSendVersion;
    uint16 public defaultReceiveVersion;
    ILayerZeroMessagingLibrary public defaultSendLibrary;
    address public defaultReceiveLibraryAddress;
    struct LibraryConfig {
        uint16 sendVersion;
        uint16 receiveVersion;
        address receiveLibraryAddress;
        ILayerZeroMessagingLibrary sendLibrary;
    }
    struct StoredPayload {
        uint64 payloadLength;
        address dstAddress;
        bytes32 payloadHash;
    }
    // user app config = [uaAddress]
    mapping(address => LibraryConfig) public uaConfigLookup;
    // inboundNonce = [srcChainId][srcAddress].
    mapping(uint16 => mapping(bytes => uint64)) public inboundNonce;
    // outboundNonce = [dstChainId][srcAddress].
    mapping(uint16 => mapping(address => uint64)) public outboundNonce;
    // storedPayload = [srcChainId][srcAddress]
    mapping(uint16 => mapping(bytes => StoredPayload)) public storedPayload;
    // library versioning events
    event NewLibraryVersionAdded(uint16 version);
    event DefaultSendVersionSet(uint16 version);
    event DefaultReceiveVersionSet(uint16 version);
    event UaSendVersionSet(address ua, uint16 version);
    event UaReceiveVersionSet(address ua, uint16 version);
    event UaForceResumeReceive(uint16 chainId, bytes srcAddress);
    // payload events
    event PayloadCleared(uint16 srcChainId, bytes srcAddress, uint64 nonce, address dstAddress);
    event PayloadStored(uint16 srcChainId, bytes srcAddress, address dstAddress, uint64 nonce, bytes payload, bytes reason);
    constructor(uint16 _chainId) {
        chainId = _chainId;
    }
    //---------------------------------------------------------------------------
    // send and receive nonreentrant lock
    uint8 internal constant _NOT_ENTERED = 1;
    uint8 internal constant _ENTERED = 2;
    uint8 internal _send_entered_state = 1;
    uint8 internal _receive_entered_state = 1;
    modifier sendNonReentrant() {
        require(_send_entered_state == _NOT_ENTERED, "LayerZero: no send reentrancy");
        _send_entered_state = _ENTERED;
        _;
        _send_entered_state = _NOT_ENTERED;
    }
    modifier receiveNonReentrant() {
        require(_receive_entered_state == _NOT_ENTERED, "LayerZero: no receive reentrancy");
        _receive_entered_state = _ENTERED;
        _;
        _receive_entered_state = _NOT_ENTERED;
    }
    // BLOCK_VERSION is also a valid version
    modifier validVersion(uint16 _version) {
        require(_version <= latestVersion || _version == BLOCK_VERSION, "LayerZero: invalid messaging library version");
        _;
    }
    //---------------------------------------------------------------------------
    // User Application Calls - Endpoint Interface
    function send(uint16 _dstChainId, bytes calldata _destination, bytes calldata _payload, address payable _refundAddress, address _zroPaymentAddress, bytes calldata _adapterParams) external payable override sendNonReentrant {
        LibraryConfig storage uaConfig = uaConfigLookup[msg.sender];
        uint64 nonce = ++outboundNonce[_dstChainId][msg.sender];
        _getSendLibrary(uaConfig).send{value: msg.value}(msg.sender, nonce, _dstChainId, _destination, _payload, _refundAddress, _zroPaymentAddress, _adapterParams);
    }
    //---------------------------------------------------------------------------
    // authenticated Library (msg.sender) Calls to pass through Endpoint to UA (dstAddress)
    function receivePayload(uint16 _srcChainId, bytes calldata _srcAddress, address _dstAddress, uint64 _nonce, uint _gasLimit, bytes calldata _payload) external override receiveNonReentrant {
        // assert and increment the nonce. no message shuffling
        require(_nonce == ++inboundNonce[_srcChainId][_srcAddress], "LayerZero: wrong nonce");
        LibraryConfig storage uaConfig = uaConfigLookup[_dstAddress];
        // authentication to prevent cross-version message validation
        // protects against a malicious library from passing arbitrary data
        if (uaConfig.receiveVersion == DEFAULT_VERSION) {
            require(defaultReceiveLibraryAddress == msg.sender, "LayerZero: invalid default library");
        } else {
            require(uaConfig.receiveLibraryAddress == msg.sender, "LayerZero: invalid library");
        }
        // block if any message blocking
        StoredPayload storage sp = storedPayload[_srcChainId][_srcAddress];
        require(sp.payloadHash == bytes32(0), "LayerZero: in message blocking");
        try ILayerZeroReceiver(_dstAddress).lzReceive{gas: _gasLimit}(_srcChainId, _srcAddress, _nonce, _payload) {
            // success, do nothing, end of the message delivery
        } catch (bytes memory reason) {
            // revert nonce if any uncaught errors/exceptions if the ua chooses the blocking mode
            storedPayload[_srcChainId][_srcAddress] = StoredPayload(uint64(_payload.length), _dstAddress, keccak256(_payload));
            emit PayloadStored(_srcChainId, _srcAddress, _dstAddress, _nonce, _payload, reason);
        }
    }
    function retryPayload(uint16 _srcChainId, bytes calldata _srcAddress, bytes calldata _payload) external override receiveNonReentrant {
        StoredPayload storage sp = storedPayload[_srcChainId][_srcAddress];
        require(sp.payloadHash != bytes32(0), "LayerZero: no stored payload");
        require(_payload.length == sp.payloadLength && keccak256(_payload) == sp.payloadHash, "LayerZero: invalid payload");
        address dstAddress = sp.dstAddress;
        // empty the storedPayload
        sp.payloadLength = 0;
        sp.dstAddress = address(0);
        sp.payloadHash = bytes32(0);
        uint64 nonce = inboundNonce[_srcChainId][_srcAddress];
        ILayerZeroReceiver(dstAddress).lzReceive(_srcChainId, _srcAddress, nonce, _payload);
        emit PayloadCleared(_srcChainId, _srcAddress, nonce, dstAddress);
    }
    //---------------------------------------------------------------------------
    // Owner Calls, only new library version upgrade (3 steps)
    // note libraryLookup[0] = 0x0, no library implementation
    // LIBRARY UPGRADE step 1: set _newLayerZeroLibraryAddress be the new version
    function newVersion(address _newLayerZeroLibraryAddress) external onlyOwner {
        require(_newLayerZeroLibraryAddress != address(0x0), "LayerZero: new version cannot be zero address");
        require(latestVersion < 65535, "LayerZero: can not add new messaging library");
        latestVersion++;
        libraryLookup[latestVersion] = ILayerZeroMessagingLibrary(_newLayerZeroLibraryAddress);
        emit NewLibraryVersionAdded(latestVersion);
    }
    // LIBRARY UPGRADE step 2: stop sending messages from the old version
    function setDefaultSendVersion(uint16 _newDefaultSendVersion) external onlyOwner validVersion(_newDefaultSendVersion) {
        require(_newDefaultSendVersion != DEFAULT_VERSION, "LayerZero: default send version must > 0");
        defaultSendVersion = _newDefaultSendVersion;
        defaultSendLibrary = libraryLookup[defaultSendVersion];
        emit DefaultSendVersionSet(_newDefaultSendVersion);
    }
    // LIBRARY UPGRADE step 3: stop receiving messages from the old version
    function setDefaultReceiveVersion(uint16 _newDefaultReceiveVersion) external onlyOwner validVersion(_newDefaultReceiveVersion) {
        require(_newDefaultReceiveVersion != DEFAULT_VERSION, "LayerZero: default receive version must > 0");
        defaultReceiveVersion = _newDefaultReceiveVersion;
        defaultReceiveLibraryAddress = address(libraryLookup[defaultReceiveVersion]);
        emit DefaultReceiveVersionSet(_newDefaultReceiveVersion);
    }
    //---------------------------------------------------------------------------
    // User Application Calls - UA set/get Interface
    function setConfig(uint16 _version, uint16 _chainId, uint _configType, bytes calldata _config) external override validVersion(_version) {
        if (_version == DEFAULT_VERSION) {
            require(defaultSendVersion == defaultReceiveVersion, "LayerZero: can not set Config during DEFAULT migration");
            _version = defaultSendVersion;
        }
        require(_version != BLOCK_VERSION, "LayerZero: can not set config for BLOCK_VERSION");
        libraryLookup[_version].setConfig(_chainId, msg.sender, _configType, _config);
    }
    // Migration step 1: set the send version
    // Define what library the UA points too
    function setSendVersion(uint16 _newVersion) external override validVersion(_newVersion) {
        // write into config
        LibraryConfig storage uaConfig = uaConfigLookup[msg.sender];
        uaConfig.sendVersion = _newVersion;
        // the libraryLookup[BLOCK_VERSION || DEFAULT_VERSION] = 0x0
        uaConfig.sendLibrary = libraryLookup[_newVersion];
        emit UaSendVersionSet(msg.sender, _newVersion);
    }
    // Migration step 2: set the receive version
    // after all messages sent from the old version are received
    // the UA can now safely switch to the new receive version
    // it is the UA's responsibility make sure all messages from the old version are processed
    function setReceiveVersion(uint16 _newVersion) external override validVersion(_newVersion) {
        // write into config
        LibraryConfig storage uaConfig = uaConfigLookup[msg.sender];
        uaConfig.receiveVersion = _newVersion;
        // the libraryLookup[BLOCK_VERSION || DEFAULT_VERSION] = 0x0
        uaConfig.receiveLibraryAddress = address(libraryLookup[_newVersion]);
        emit UaReceiveVersionSet(msg.sender, _newVersion);
    }
    function forceResumeReceive(uint16 _srcChainId, bytes calldata _srcAddress) external override {
        StoredPayload storage sp = storedPayload[_srcChainId][_srcAddress];
        // revert if no messages are cached. safeguard malicious UA behaviour
        require(sp.payloadHash != bytes32(0), "LayerZero: no stored payload");
        require(sp.dstAddress == msg.sender, "LayerZero: invalid caller");
        // empty the storedPayload
        sp.payloadLength = 0;
        sp.dstAddress = address(0);
        sp.payloadHash = bytes32(0);
        // emit the event with the new nonce
        emit UaForceResumeReceive(_srcChainId, _srcAddress);
    }
    //---------------------------------------------------------------------------
    // view helper function
    function estimateFees(uint16 _dstChainId, address _userApplication, bytes calldata _payload, bool _payInZRO, bytes calldata _adapterParams) external view override returns (uint nativeFee, uint zroFee) {
        LibraryConfig storage uaConfig = uaConfigLookup[_userApplication];
        ILayerZeroMessagingLibrary lib = uaConfig.sendVersion == DEFAULT_VERSION ? defaultSendLibrary : uaConfig.sendLibrary;
        return lib.estimateFees(_dstChainId, _userApplication, _payload, _payInZRO, _adapterParams);
    }
    function _getSendLibrary(LibraryConfig storage uaConfig) internal view returns (ILayerZeroMessagingLibrary) {
        if (uaConfig.sendVersion == DEFAULT_VERSION) {
            // check if the in send-blocking upgrade
            require(defaultSendVersion != BLOCK_VERSION, "LayerZero: default in BLOCK_VERSION");
            return defaultSendLibrary;
        } else {
            // check if the in send-blocking upgrade
            require(uaConfig.sendVersion != BLOCK_VERSION, "LayerZero: in BLOCK_VERSION");
            return uaConfig.sendLibrary;
        }
    }
    function getSendLibraryAddress(address _userApplication) external view override returns (address sendLibraryAddress) {
        LibraryConfig storage uaConfig = uaConfigLookup[_userApplication];
        uint16 sendVersion = uaConfig.sendVersion;
        require(sendVersion != BLOCK_VERSION, "LayerZero: send version is BLOCK_VERSION");
        if (sendVersion == DEFAULT_VERSION) {
            require(defaultSendVersion != BLOCK_VERSION, "LayerZero: send version (default) is BLOCK_VERSION");
            sendLibraryAddress = address(defaultSendLibrary);
        } else {
            sendLibraryAddress = address(uaConfig.sendLibrary);
        }
    }
    function getReceiveLibraryAddress(address _userApplication) external view override returns (address receiveLibraryAddress) {
        LibraryConfig storage uaConfig = uaConfigLookup[_userApplication];
        uint16 receiveVersion = uaConfig.receiveVersion;
        require(receiveVersion != BLOCK_VERSION, "LayerZero: receive version is BLOCK_VERSION");
        if (receiveVersion == DEFAULT_VERSION) {
            require(defaultReceiveVersion != BLOCK_VERSION, "LayerZero: receive version (default) is BLOCK_VERSION");
            receiveLibraryAddress = defaultReceiveLibraryAddress;
        } else {
            receiveLibraryAddress = uaConfig.receiveLibraryAddress;
        }
    }
    function isSendingPayload() external view override returns (bool) {
        return _send_entered_state == _ENTERED;
    }
    function isReceivingPayload() external view override returns (bool) {
        return _receive_entered_state == _ENTERED;
    }
    function getInboundNonce(uint16 _srcChainId, bytes calldata _srcAddress) external view override returns (uint64) {
        return inboundNonce[_srcChainId][_srcAddress];
    }
    function getOutboundNonce(uint16 _dstChainId, address _srcAddress) external view override returns (uint64) {
        return outboundNonce[_dstChainId][_srcAddress];
    }
    function getChainId() external view override returns (uint16) {
        return chainId;
    }
    function getSendVersion(address _userApplication) external view override returns (uint16) {
        LibraryConfig storage uaConfig = uaConfigLookup[_userApplication];
        return uaConfig.sendVersion == DEFAULT_VERSION ? defaultSendVersion : uaConfig.sendVersion;
    }
    function getReceiveVersion(address _userApplication) external view override returns (uint16) {
        LibraryConfig storage uaConfig = uaConfigLookup[_userApplication];
        return uaConfig.receiveVersion == DEFAULT_VERSION ? defaultReceiveVersion : uaConfig.receiveVersion;
    }
    function getConfig(uint16 _version, uint16 _chainId, address _userApplication, uint _configType) external view override validVersion(_version) returns (bytes memory) {
        if (_version == DEFAULT_VERSION) {
            require(defaultSendVersion == defaultReceiveVersion, "LayerZero: no DEFAULT config while migration");
            _version = defaultSendVersion;
        }
        require(_version != BLOCK_VERSION, "LayerZero: can not get config for BLOCK_VERSION");
        return libraryLookup[_version].getConfig(_chainId, _userApplication, _configType);
    }
    function hasStoredPayload(uint16 _srcChainId, bytes calldata _srcAddress) external view override returns (bool) {
        StoredPayload storage sp = storedPayload[_srcChainId][_srcAddress];
        return sp.payloadHash != bytes32(0);
    }
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity >=0.5.0;
interface ILayerZeroReceiver {
    // @notice LayerZero endpoint will invoke this function to deliver the message on the destination
    // @param _srcChainId - the source endpoint identifier
    // @param _srcAddress - the source sending contract address from the source chain
    // @param _nonce - the ordered message nonce
    // @param _payload - the signed payload is the UA bytes has encoded to be sent
    function lzReceive(uint16 _srcChainId, bytes calldata _srcAddress, uint64 _nonce, bytes calldata _payload) external;
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity >=0.5.0;
import "./ILayerZeroUserApplicationConfig.sol";
interface ILayerZeroEndpoint is ILayerZeroUserApplicationConfig {
    // @notice send a LayerZero message to the specified address at a LayerZero endpoint.
    // @param _dstChainId - the destination chain identifier
    // @param _destination - the address on destination chain (in bytes). address length/format may vary by chains
    // @param _payload - a custom bytes payload to send to the destination contract
    // @param _refundAddress - if the source transaction is cheaper than the amount of value passed, refund the additional amount to this address
    // @param _zroPaymentAddress - the address of the ZRO token holder who would pay for the transaction
    // @param _adapterParams - parameters for custom functionality. e.g. receive airdropped native gas from the relayer on destination
    function send(uint16 _dstChainId, bytes calldata _destination, bytes calldata _payload, address payable _refundAddress, address _zroPaymentAddress, bytes calldata _adapterParams) external payable;
    // @notice used by the messaging library to publish verified payload
    // @param _srcChainId - the source chain identifier
    // @param _srcAddress - the source contract (as bytes) at the source chain
    // @param _dstAddress - the address on destination chain
    // @param _nonce - the unbound message ordering nonce
    // @param _gasLimit - the gas limit for external contract execution
    // @param _payload - verified payload to send to the destination contract
    function receivePayload(uint16 _srcChainId, bytes calldata _srcAddress, address _dstAddress, uint64 _nonce, uint _gasLimit, bytes calldata _payload) external;
    // @notice get the inboundNonce of a receiver from a source chain which could be EVM or non-EVM chain
    // @param _srcChainId - the source chain identifier
    // @param _srcAddress - the source chain contract address
    function getInboundNonce(uint16 _srcChainId, bytes calldata _srcAddress) external view returns (uint64);
    // @notice get the outboundNonce from this source chain which, consequently, is always an EVM
    // @param _srcAddress - the source chain contract address
    function getOutboundNonce(uint16 _dstChainId, address _srcAddress) external view returns (uint64);
    // @notice gets a quote in source native gas, for the amount that send() requires to pay for message delivery
    // @param _dstChainId - the destination chain identifier
    // @param _userApplication - the user app address on this EVM chain
    // @param _payload - the custom message to send over LayerZero
    // @param _payInZRO - if false, user app pays the protocol fee in native token
    // @param _adapterParam - parameters for the adapter service, e.g. send some dust native token to dstChain
    function estimateFees(uint16 _dstChainId, address _userApplication, bytes calldata _payload, bool _payInZRO, bytes calldata _adapterParam) external view returns (uint nativeFee, uint zroFee);
    // @notice get this Endpoint's immutable source identifier
    function getChainId() external view returns (uint16);
    // @notice the interface to retry failed message on this Endpoint destination
    // @param _srcChainId - the source chain identifier
    // @param _srcAddress - the source chain contract address
    // @param _payload - the payload to be retried
    function retryPayload(uint16 _srcChainId, bytes calldata _srcAddress, bytes calldata _payload) external;
    // @notice query if any STORED payload (message blocking) at the endpoint.
    // @param _srcChainId - the source chain identifier
    // @param _srcAddress - the source chain contract address
    function hasStoredPayload(uint16 _srcChainId, bytes calldata _srcAddress) external view returns (bool);
    // @notice query if the _libraryAddress is valid for sending msgs.
    // @param _userApplication - the user app address on this EVM chain
    function getSendLibraryAddress(address _userApplication) external view returns (address);
    // @notice query if the _libraryAddress is valid for receiving msgs.
    // @param _userApplication - the user app address on this EVM chain
    function getReceiveLibraryAddress(address _userApplication) external view returns (address);
    // @notice query if the non-reentrancy guard for send() is on
    // @return true if the guard is on. false otherwise
    function isSendingPayload() external view returns (bool);
    // @notice query if the non-reentrancy guard for receive() is on
    // @return true if the guard is on. false otherwise
    function isReceivingPayload() external view returns (bool);
    // @notice get the configuration of the LayerZero messaging library of the specified version
    // @param _version - messaging library version
    // @param _chainId - the chainId for the pending config change
    // @param _userApplication - the contract address of the user application
    // @param _configType - type of configuration. every messaging library has its own convention.
    function getConfig(uint16 _version, uint16 _chainId, address _userApplication, uint _configType) external view returns (bytes memory);
    // @notice get the send() LayerZero messaging library version
    // @param _userApplication - the contract address of the user application
    function getSendVersion(address _userApplication) external view returns (uint16);
    // @notice get the lzReceive() LayerZero messaging library version
    // @param _userApplication - the contract address of the user application
    function getReceiveVersion(address _userApplication) external view returns (uint16);
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity >=0.7.0;
import "./ILayerZeroUserApplicationConfig.sol";
interface ILayerZeroMessagingLibrary {
    // send(), messages will be inflight.
    function send(address _userApplication, uint64 _lastNonce, uint16 _chainId, bytes calldata _destination, bytes calldata _payload, address payable refundAddress, address _zroPaymentAddress, bytes calldata _adapterParams) external payable;
    // estimate native fee at the send side
    function estimateFees(uint16 _chainId, address _userApplication, bytes calldata _payload, bool _payInZRO, bytes calldata _adapterParam) external view returns (uint nativeFee, uint zroFee);
    //---------------------------------------------------------------------------
    // setConfig / getConfig are User Application (UA) functions to specify Oracle, Relayer, blockConfirmations, libraryVersion
    function setConfig(uint16 _chainId, address _userApplication, uint _configType, bytes calldata _config) external;
    function getConfig(uint16 _chainId, address _userApplication, uint _configType) external view returns (bytes memory);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.7.0;
import "../utils/Context.sol";
/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;
    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor () {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }
    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }
    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }
    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }
    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity >=0.5.0;
interface ILayerZeroUserApplicationConfig {
    // @notice set the configuration of the LayerZero messaging library of the specified version
    // @param _version - messaging library version
    // @param _chainId - the chainId for the pending config change
    // @param _configType - type of configuration. every messaging library has its own convention.
    // @param _config - configuration in the bytes. can encode arbitrary content.
    function setConfig(uint16 _version, uint16 _chainId, uint _configType, bytes calldata _config) external;
    // @notice set the send() LayerZero messaging library version to _version
    // @param _version - new messaging library version
    function setSendVersion(uint16 _version) external;
    // @notice set the lzReceive() LayerZero messaging library version to _version
    // @param _version - new messaging library version
    function setReceiveVersion(uint16 _version) external;
    // @notice Only when the UA needs to resume the message flow in blocking mode and clear the stored payload
    // @param _srcChainId - the chainId of the source chain
    // @param _srcAddress - the contract address of the source contract at the source chain
    function forceResumeReceive(uint16 _srcChainId, bytes calldata _srcAddress) external;
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }
    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}