Contract Source Code:

/* --------
 Token Deployed using Saintbot
 Contract Renounced automatically
 Liquidity Locked on UNCX, 0 Owner Tokens, Anti-Rug by default
 Deploy and manage fair launch anti-rug tokens seamlessly and lightning-fast with low gas on our free-to-use Telegram bot.
 --------
 Website:
 Twitter: https://twitter.com/https://twitter.com/RESTINPEACECZ
 Telegram: https://t.me/https://t.me/restinpeacecz
 Gitbook:
*/

// SPDX-License-Identifier: UNLICENSED
pragma solidity 0.8.21;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
  function _msgSender() internal view virtual returns (address) {
    return msg.sender;
  }

  function _msgData() internal view virtual returns (bytes calldata) {
    return msg.data;
  }
}

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
  address private _owner;

  event OwnershipTransferred(
    address indexed previousOwner,
    address indexed newOwner
  );

  /**
   * @dev Initializes the contract setting the deployer as the initial owner.
   */
  constructor() {
    _transferOwnership(_msgSender());
  }

  /**
   * @dev Returns the address of the current owner.
   */
  function owner() public view virtual returns (address) {
    return _owner;
  }

  /**
   * @dev Throws if called by any account other than the owner.
   */
  modifier onlyOwner() {
    require(owner() == _msgSender(), "Ownable: caller is not the owner");
    _;
  }

  /**
   * @dev Leaves the contract without owner. It will not be possible to call
   * `onlyOwner` functions anymore. Can only be called by the current owner.
   *
   * NOTE: Renouncing ownership will leave the contract without an owner,
   * thereby removing any functionality that is only available to the owner.
   */
  function renounceOwnership() public virtual onlyOwner {
    _transferOwnership(address(0));
  }

  /**
   * @dev Transfers ownership of the contract to a new account (`newOwner`).
   * Can only be called by the current owner.
   */
  function transferOwnership(address newOwner) public virtual onlyOwner {
    require(newOwner != address(0), "Ownable: new owner is the zero address");
    _transferOwnership(newOwner);
  }

  /**
   * @dev Transfers ownership of the contract to a new account (`newOwner`).
   * Internal function without access restriction.
   */
  function _transferOwnership(address newOwner) internal virtual {
    address oldOwner = _owner;
    _owner = newOwner;
    emit OwnershipTransferred(oldOwner, newOwner);
  }
}

////// lib/openzeppelin-contracts/contracts/token/ERC20/IERC20.sol
// OpenZeppelin Contracts v4.4.0 (token/ERC20/IERC20.sol)

/* pragma solidity ^0.8.0; */

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
  /**
   * @dev Returns the amount of tokens in existence.
   */
  function totalSupply() external view returns (uint256);

  /**
   * @dev Returns the amount of tokens owned by `account`.
   */
  function balanceOf(address account) external view returns (uint256);

  /**
   * @dev Moves `amount` tokens from the caller's account to `recipient`.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * Emits a {Transfer} event.
   */
  function transfer(address recipient, uint256 amount) external returns (bool);

  /**
   * @dev Returns the remaining number of tokens that `spender` will be
   * allowed to spend on behalf of `owner` through {transferFrom}. This is
   * zero by default.
   *
   * This value changes when {approve} or {transferFrom} are called.
   */
  function allowance(
    address owner,
    address spender
  ) external view returns (uint256);

  /**
   * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * IMPORTANT: Beware that changing an allowance with this method brings the risk
   * that someone may use both the old and the new allowance by unfortunate
   * transaction ordering. One possible solution to mitigate this race
   * condition is to first reduce the spender's allowance to 0 and set the
   * desired value afterwards:
   * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
   *
   * Emits an {Approval} event.
   */
  function approve(address spender, uint256 amount) external returns (bool);

  /**
   * @dev Moves `amount` tokens from `sender` to `recipient` using the
   * allowance mechanism. `amount` is then deducted from the caller's
   * allowance.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * Emits a {Transfer} event.
   */
  function transferFrom(
    address sender,
    address recipient,
    uint256 amount
  ) external returns (bool);

  /**
   * @dev Emitted when `value` tokens are moved from one account (`from`) to
   * another (`to`).
   *
   * Note that `value` may be zero.
   */
  event Transfer(address indexed from, address indexed to, uint256 value);

  /**
   * @dev Emitted when the allowance of a `spender` for an `owner` is set by
   * a call to {approve}. `value` is the new allowance.
   */
  event Approval(address indexed owner, address indexed spender, uint256 value);
}

////// lib/openzeppelin-contracts/contracts/token/ERC20/extensions/IERC20Metadata.sol
// OpenZeppelin Contracts v4.4.0 (token/ERC20/extensions/IERC20Metadata.sol)

/* pragma solidity ^0.8.0; */

/* import "../IERC20.sol"; */

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 *
 * _Available since v4.1._
 */
interface IERC20Metadata is IERC20 {
  /**
   * @dev Returns the name of the token.
   */
  function name() external view returns (string memory);

  /**
   * @dev Returns the symbol of the token.
   */
  function symbol() external view returns (string memory);

  /**
   * @dev Returns the decimals places of the token.
   */
  function decimals() external view returns (uint8);
}

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC20
 * applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20, IERC20Metadata {
  mapping(address => uint256) private _balances;

  mapping(address => mapping(address => uint256)) private _allowances;

  uint256 private _totalSupply;

  string private _name;
  string private _symbol;

  /**
   * @dev Sets the values for {name} and {symbol}.
   *
   * The default value of {decimals} is 18. To select a different value for
   * {decimals} you should overload it.
   *
   * All two of these values are immutable: they can only be set once during
   * construction.
   */
  constructor(string memory name_, string memory symbol_) {
    _name = name_;
    _symbol = symbol_;
  }

  /**
   * @dev Returns the name of the token.
   */
  function name() public view virtual override returns (string memory) {
    return _name;
  }

  /**
   * @dev Returns the symbol of the token, usually a shorter version of the
   * name.
   */
  function symbol() public view virtual override returns (string memory) {
    return _symbol;
  }

  /**
   * @dev Returns the number of decimals used to get its user representation.
   * For example, if `decimals` equals `2`, a balance of `505` tokens should
   * be displayed to a user as `5.05` (`505 / 10 ** 2`).
   *
   * Tokens usually opt for a value of 18, imitating the relationship between
   * Ether and Wei. This is the value {ERC20} uses, unless this function is
   * overridden;
   *
   * NOTE: This information is only used for _display_ purposes: it in
   * no way affects any of the arithmetic of the contract, including
   * {IERC20-balanceOf} and {IERC20-transfer}.
   */
  function decimals() public view virtual override returns (uint8) {
    return 18;
  }

  /**
   * @dev See {IERC20-totalSupply}.
   */
  function totalSupply() public view virtual override returns (uint256) {
    return _totalSupply;
  }

  /**
   * @dev See {IERC20-balanceOf}.
   */
  function balanceOf(
    address account
  ) public view virtual override returns (uint256) {
    return _balances[account];
  }

  /**
   * @dev See {IERC20-transfer}.
   *
   * Requirements:
   *
   * - `recipient` cannot be the zero address.
   * - the caller must have a balance of at least `amount`.
   */
  function transfer(
    address recipient,
    uint256 amount
  ) public virtual override returns (bool) {
    _transfer(_msgSender(), recipient, amount);
    return true;
  }

  /**
   * @dev See {IERC20-allowance}.
   */
  function allowance(
    address owner,
    address spender
  ) public view virtual override returns (uint256) {
    return _allowances[owner][spender];
  }

  /**
   * @dev See {IERC20-approve}.
   *
   * Requirements:
   *
   * - `spender` cannot be the zero address.
   */
  function approve(
    address spender,
    uint256 amount
  ) public virtual override returns (bool) {
    _approve(_msgSender(), spender, amount);
    return true;
  }

  /**
   * @dev See {IERC20-transferFrom}.
   *
   * Emits an {Approval} event indicating the updated allowance. This is not
   * required by the EIP. See the note at the beginning of {ERC20}.
   *
   * Requirements:
   *
   * - `sender` and `recipient` cannot be the zero address.
   * - `sender` must have a balance of at least `amount`.
   * - the caller must have allowance for ``sender``'s tokens of at least
   * `amount`.
   */
  function transferFrom(
    address sender,
    address recipient,
    uint256 amount
  ) public virtual override returns (bool) {
    _transfer(sender, recipient, amount);

    uint256 currentAllowance = _allowances[sender][_msgSender()];
    require(
      currentAllowance >= amount,
      "ERC20: transfer amount exceeds allowance"
    );
    unchecked {
      _approve(sender, _msgSender(), currentAllowance - amount);
    }

    return true;
  }

  /**
   * @dev Atomically increases the allowance granted to `spender` by the caller.
   *
   * This is an alternative to {approve} that can be used as a mitigation for
   * problems described in {IERC20-approve}.
   *
   * Emits an {Approval} event indicating the updated allowance.
   *
   * Requirements:
   *
   * - `spender` cannot be the zero address.
   */
  function increaseAllowance(
    address spender,
    uint256 addedValue
  ) public virtual returns (bool) {
    _approve(
      _msgSender(),
      spender,
      _allowances[_msgSender()][spender] + addedValue
    );
    return true;
  }

  /**
   * @dev Atomically decreases the allowance granted to `spender` by the caller.
   *
   * This is an alternative to {approve} that can be used as a mitigation for
   * problems described in {IERC20-approve}.
   *
   * Emits an {Approval} event indicating the updated allowance.
   *
   * Requirements:
   *
   * - `spender` cannot be the zero address.
   * - `spender` must have allowance for the caller of at least
   * `subtractedValue`.
   */
  function decreaseAllowance(
    address spender,
    uint256 subtractedValue
  ) public virtual returns (bool) {
    uint256 currentAllowance = _allowances[_msgSender()][spender];
    require(
      currentAllowance >= subtractedValue,
      "ERC20: decreased allowance below zero"
    );
    unchecked {
      _approve(_msgSender(), spender, currentAllowance - subtractedValue);
    }

    return true;
  }

  /**
   * @dev Moves `amount` of tokens from `sender` to `recipient`.
   *
   * This internal function is equivalent to {transfer}, and can be used to
   * e.g. implement automatic token fees, slashing mechanisms, etc.
   *
   * Emits a {Transfer} event.
   *
   * Requirements:
   *
   * - `sender` cannot be the zero address.
   * - `recipient` cannot be the zero address.
   * - `sender` must have a balance of at least `amount`.
   */
  function _transfer(
    address sender,
    address recipient,
    uint256 amount
  ) internal virtual {
    require(sender != address(0), "ERC20: transfer from the zero address");
    require(recipient != address(0), "ERC20: transfer to the zero address");

    _beforeTokenTransfer(sender, recipient, amount);

    uint256 senderBalance = _balances[sender];
    require(senderBalance >= amount, "ERC20: transfer amount exceeds balance");
    unchecked {
      _balances[sender] = senderBalance - amount;
    }
    _balances[recipient] += amount;

    emit Transfer(sender, recipient, amount);

    _afterTokenTransfer(sender, recipient, amount);
  }

  /**
   * @dev Creates `amount` tokens and assigns them to `account`, increasing
   * the total supply.
   *
   * Emits a {Transfer} event with `from` set to the zero address.
   *
   * Requirements:
   *
   * - `account` cannot be the zero address.
   */
  function _mint(address account, uint256 amount) internal virtual {
    require(account != address(0), "ERC20: mint to the zero address");

    _beforeTokenTransfer(address(0), account, amount);

    _totalSupply += amount;
    _balances[account] += amount;
    emit Transfer(address(0), account, amount);

    _afterTokenTransfer(address(0), account, amount);
  }

  /**
   * @dev Destroys `amount` tokens from `account`, reducing the
   * total supply.
   *
   * Emits a {Transfer} event with `to` set to the zero address.
   *
   * Requirements:
   *
   * - `account` cannot be the zero address.
   * - `account` must have at least `amount` tokens.
   */
  function _burn(address account, uint256 amount) internal virtual {
    require(account != address(0), "ERC20: burn from the zero address");

    _beforeTokenTransfer(account, address(0), amount);

    uint256 accountBalance = _balances[account];
    require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
    unchecked {
      _balances[account] = accountBalance - amount;
    }
    _totalSupply -= amount;

    emit Transfer(account, address(0), amount);

    _afterTokenTransfer(account, address(0), amount);
  }

  /**
   * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
   *
   * This internal function is equivalent to `approve`, and can be used to
   * e.g. set automatic allowances for certain subsystems, etc.
   *
   * Emits an {Approval} event.
   *
   * Requirements:
   *
   * - `owner` cannot be the zero address.
   * - `spender` cannot be the zero address.
   */
  function _approve(
    address owner,
    address spender,
    uint256 amount
  ) internal virtual {
    require(owner != address(0), "ERC20: approve from the zero address");
    require(spender != address(0), "ERC20: approve to the zero address");

    _allowances[owner][spender] = amount;
    emit Approval(owner, spender, amount);
  }

  /**
   * @dev Hook that is called before any transfer of tokens. This includes
   * minting and burning.
   *
   * Calling conditions:
   *
   * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
   * will be transferred to `to`.
   * - when `from` is zero, `amount` tokens will be minted for `to`.
   * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
   * - `from` and `to` are never both zero.
   *
   * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
   */
  function _beforeTokenTransfer(
    address from,
    address to,
    uint256 amount
  ) internal virtual {}

  /**
   * @dev Hook that is called after any transfer of tokens. This includes
   * minting and burning.
   *
   * Calling conditions:
   *
   * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
   * has been transferred to `to`.
   * - when `from` is zero, `amount` tokens have been minted for `to`.
   * - when `to` is zero, `amount` of ``from``'s tokens have been burned.
   * - `from` and `to` are never both zero.
   *
   * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
   */
  function _afterTokenTransfer(
    address from,
    address to,
    uint256 amount
  ) internal virtual {}
}

/**
 * @dev Wrappers over Solidity's arithmetic operations.
 *
 * NOTE: `SafeMath` is generally not needed starting with Solidity 0.8, since the compiler
 * now has built in overflow checking.
 */
library SafeMath {
  /**
   * @dev Returns the addition of two unsigned integers, reverting on
   * overflow.
   *
   * Counterpart to Solidity's `+` operator.
   *
   * Requirements:
   *
   * - Addition cannot overflow.
   */
  function add(uint256 a, uint256 b) internal pure returns (uint256) {
    return a + b;
  }

  /**
   * @dev Returns the subtraction of two unsigned integers, reverting on
   * overflow (when the result is negative).
   *
   * Counterpart to Solidity's `-` operator.
   *
   * Requirements:
   *
   * - Subtraction cannot overflow.
   */
  function sub(uint256 a, uint256 b) internal pure returns (uint256) {
    return a - b;
  }

  /**
   * @dev Returns the multiplication of two unsigned integers, reverting on
   * overflow.
   *
   * Counterpart to Solidity's `*` operator.
   *
   * Requirements:
   *
   * - Multiplication cannot overflow.
   */
  function mul(uint256 a, uint256 b) internal pure returns (uint256) {
    return a * b;
  }

  /**
   * @dev Returns the integer division of two unsigned integers, reverting on
   * division by zero. The result is rounded towards zero.
   *
   * Counterpart to Solidity's `/` operator.
   *
   * Requirements:
   *
   * - The divisor cannot be zero.
   */
  function div(uint256 a, uint256 b) internal pure returns (uint256) {
    return a / b;
  }

  /**
   * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
   * overflow (when the result is negative).
   *
   * CAUTION: This function is deprecated because it requires allocating memory for the error
   * message unnecessarily. For custom revert reasons use {trySub}.
   *
   * Counterpart to Solidity's `-` operator.
   *
   * Requirements:
   *
   * - Subtraction cannot overflow.
   */
  function sub(
    uint256 a,
    uint256 b,
    string memory errorMessage
  ) internal pure returns (uint256) {
    unchecked {
      require(b <= a, errorMessage);
      return a - b;
    }
  }

  /**
   * @dev Returns the integer division of two unsigned integers, reverting with custom message on
   * division by zero. The result is rounded towards zero.
   *
   * Counterpart to Solidity's `/` operator. Note: this function uses a
   * `revert` opcode (which leaves remaining gas untouched) while Solidity
   * uses an invalid opcode to revert (consuming all remaining gas).
   *
   * Requirements:
   *
   * - The divisor cannot be zero.
   */
  function div(
    uint256 a,
    uint256 b,
    string memory errorMessage
  ) internal pure returns (uint256) {
    unchecked {
      require(b > 0, errorMessage);
      return a / b;
    }
  }
}

interface IUniswapV2Factory {
  function createPair(
    address tokenA,
    address tokenB
  ) external returns (address pair);
}

interface IUniswapV2Pair {
  event Approval(address indexed owner, address indexed spender, uint256 value);
  event Transfer(address indexed from, address indexed to, uint256 value);

  function name() external pure returns (string memory);

  function symbol() external pure returns (string memory);

  function decimals() external pure returns (uint8);

  function totalSupply() external view returns (uint256);

  function balanceOf(address owner) external view returns (uint256);

  function allowance(
    address owner,
    address spender
  ) external view returns (uint256);

  function approve(address spender, uint256 value) external returns (bool);

  function transfer(address to, uint256 value) external returns (bool);

  function transferFrom(
    address from,
    address to,
    uint256 value
  ) external returns (bool);

  function factory() external view returns (address);

  function token0() external view returns (address);

  function token1() external view returns (address);

  function mint(address to) external returns (uint256 liquidity);

  function burn(address to) external returns (uint256 amount0, uint256 amount1);

  function swap(
    uint256 amount0Out,
    uint256 amount1Out,
    address to,
    bytes calldata data
  ) external;
}

interface IUniswapV2Router02 {
  function factory() external pure returns (address);

  function WETH() external pure returns (address);

  function addLiquidity(
    address tokenA,
    address tokenB,
    uint256 amountADesired,
    uint256 amountBDesired,
    uint256 amountAMin,
    uint256 amountBMin,
    address to,
    uint256 deadline
  ) external returns (uint256 amountA, uint256 amountB, uint256 liquidity);

  function addLiquidityETH(
    address token,
    uint256 amountTokenDesired,
    uint256 amountTokenMin,
    uint256 amountETHMin,
    address to,
    uint256 deadline
  )
    external
    payable
    returns (uint256 amountToken, uint256 amountETH, uint256 liquidity);

  function swapExactTokensForTokensSupportingFeeOnTransferTokens(
    uint256 amountIn,
    uint256 amountOutMin,
    address[] calldata path,
    address to,
    uint256 deadline
  ) external;

  function swapExactETHForTokensSupportingFeeOnTransferTokens(
    uint256 amountOutMin,
    address[] calldata path,
    address to,
    uint256 deadline
  ) external payable;

  function swapExactTokensForETHSupportingFeeOnTransferTokens(
    uint256 amountIn,
    uint256 amountOutMin,
    address[] calldata path,
    address to,
    uint256 deadline
  ) external;
}

interface IERCBurn {
  function burn(uint256 _amount) external;

  function approve(address spender, uint256 amount) external returns (bool);

  function allowance(address owner, address spender) external returns (uint256);

  function balanceOf(address account) external view returns (uint256);

  function transfer(address to, uint256 value) external returns (bool);
}

interface IUNCX {
  function lockLPToken(
    address _lpToken,
    uint256 _amount,
    uint256 _unlock_date,
    address payable _referral,
    bool _fee_in_eth,
    address payable _withdrawer
  ) external payable;

  struct FeeStruct {
    uint256 ethFee; // Small eth fee to prevent spam on the platform
    IERCBurn secondaryFeeToken; // UNCX or UNCL
    uint256 secondaryTokenFee; // optional, UNCX or UNCL
    uint256 secondaryTokenDiscount; // discount on liquidity fee for burning secondaryToken
    uint256 liquidityFee; // fee on univ2 liquidity tokens
    uint256 referralPercent; // fee for referrals
    IERCBurn referralToken; // token the refferer must hold to qualify as a referrer
    uint256 referralHold; // balance the referrer must hold to qualify as a referrer
    uint256 referralDiscount; // discount on flatrate fees for using a valid referral address
  }

  function gFees() external returns (FeeStruct memory);
}

interface IRefSys {
  function getRefReceiver(
    bytes memory _refCode
  ) external view returns (address receiverWallet);
}

contract V3SaintbotToken is ERC20, Ownable {
  using SafeMath for uint256;

  IUNCX public constant LOCKER =
    IUNCX(0x663A5C229c09b049E36dCc11a9B0d4a8Eb9db214);

  IUniswapV2Router02 public immutable uniswapV2Router;
  address public immutable uniswapV2Pair;
  address public constant deadAddress = address(0xdead);

  bool private swapping;

  address public teamWallet;

  uint256 public maxTransactionAmount;
  uint256 public swapTokensAtAmount;
  uint256 public maxWallet;

  bool public tradingActive = false;
  bool public swapEnabled = false;

  uint256 public immutable buyTotalFees;
  uint256 public immutable sellTotalFees;
  uint256 public immutable maxSell;

  // exclude from fees and max transaction amount
  mapping(address => bool) private _isExcludedFromFees;
  mapping(address => bool) public _isExcludedMaxTransactionAmount;

  // store addresses that a automatic market maker pairs. Any transfer *to* these addresses
  // could be subject to a maximum transfer amount
  mapping(address => bool) public automatedMarketMakerPairs;

  event ExcludeFromFees(address indexed account, bool isExcluded);

  event SetAutomatedMarketMakerPair(address indexed pair, bool indexed value);

  event teamWalletUpdated(address indexed newWallet, address indexed oldWallet);

  address public immutable REF;
  uint256 public immutable NONCE;

  IRefSys public constant REF_SYS =
    IRefSys(0x8A99c005C7B425ce999441afeE22D4987F7a9869);
  address public constant MAINNET_BOT_TRADING_RECEIVER =
    0xD5E2E43e30b706de8A0e01e72a6aBa2b8930af44;

  constructor(
    string memory _name,
    string memory _symbol,
    uint256 _totalSupply,
    uint256 _buyTaxes,
    uint256 _sellTaxes,
    address _lockOwnerAndTaxReceiver,
    bytes memory _ref
  ) payable ERC20(_name, _symbol) {
    require(
      msg.value >= 0.4 ether,
      "weth liquidity need to be bigger than 0.4"
    );
    require(
      _totalSupply >= 10 && _totalSupply <= 1_000_000_000_000_000,
      "InvalidSupply()"
    );
    require(_buyTaxes >= 1 && _buyTaxes <= 7, "InvalidTaxes()");
    require(_sellTaxes >= 1 && _sellTaxes <= 7, "InvalidTaxes()");

    IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(
      0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D
    );

    excludeFromMaxTransaction(address(_uniswapV2Router), true);

    uniswapV2Router = _uniswapV2Router;

    uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(
      address(this),
      _uniswapV2Router.WETH()
    );

    excludeFromMaxTransaction(address(uniswapV2Pair), true);
    _setAutomatedMarketMakerPair(address(uniswapV2Pair), true);

    uint256 totalSupply_ = _totalSupply * 1e18;

    maxTransactionAmount = (totalSupply_ * 3) / 100;
    maxWallet = (totalSupply_ * 6) / 100;
    swapTokensAtAmount = (totalSupply_ * 5) / 10000; // 0.05%
    maxSell = (totalSupply_ * 5) / 1_000;

    buyTotalFees = _buyTaxes;
    sellTotalFees = _sellTaxes;

    teamWallet = _lockOwnerAndTaxReceiver; // set as team wallet

    // exclude from paying fees or having max transaction amount
    excludeFromFees(address(this), true);
    excludeFromFees(address(0xdead), true);

    excludeFromMaxTransaction(address(this), true);
    excludeFromMaxTransaction(address(0xdead), true);
    excludeFromMaxTransaction(_lockOwnerAndTaxReceiver, true);
    excludeFromMaxTransaction(address(uniswapV2Router), true);

    REF = REF_SYS.getRefReceiver(_ref);

    /*
            _mint is an internal function in ERC20.sol that is only called here,
            and CANNOT be called ever again
        */
    _mint(address(this), totalSupply_);
  }

  function addLiquidity(uint256 _multiplier) external {
    require(msg.sender == owner(), "auth");

    _approve(address(this), address(uniswapV2Router), totalSupply());
    tradingActive = true;
    swapEnabled = true;

    uint256 minLock = 30 days;
    uint256 uncxExpenses = LOCKER.gFees().ethFee;
    address _pair = address(uniswapV2Pair);

    uniswapV2Router.addLiquidityETH{
      value: address(this).balance - uncxExpenses
    }(
      address(this),
      balanceOf(address(this)),
      0,
      0,
      address(this),
      block.timestamp
    );

    IERCBurn(_pair).approve(
      address(LOCKER),
      IERC20(_pair).balanceOf(address(this))
    );

    LOCKER.lockLPToken{value: uncxExpenses}(
      address(_pair),
      IERC20(_pair).balanceOf(address(this)),
      block.timestamp + (minLock * _multiplier),
      payable(address(0)),
      true,
      payable(owner())
    );

    renounceOwnership();
  }

  receive() external payable {}

  function excludeFromMaxTransaction(address updAds, bool isEx) internal {
    _isExcludedMaxTransactionAmount[updAds] = isEx;
  }

  function excludeFromFees(address account, bool excluded) internal {
    _isExcludedFromFees[account] = excluded;
    emit ExcludeFromFees(account, excluded);
  }

  function setAutomatedMarketMakerPair(address pair, bool value) internal {
    require(
      pair != uniswapV2Pair,
      "The pair cannot be removed from automatedMarketMakerPairs"
    );

    _setAutomatedMarketMakerPair(pair, value);
  }

  function _setAutomatedMarketMakerPair(address pair, bool value) private {
    automatedMarketMakerPairs[pair] = value;

    emit SetAutomatedMarketMakerPair(pair, value);
  }

  function updateTeamWallet(address newWallet) external {
    require(msg.sender == teamWallet, "auth");

    emit teamWalletUpdated(newWallet, teamWallet);

    teamWallet = newWallet;
  }

  function isExcludedFromFees(address account) public view returns (bool) {
    return _isExcludedFromFees[account];
  }

  function _transfer(
    address from,
    address to,
    uint256 amount
  ) internal override {
    require(from != address(0), "ERC20: transfer from the zero address");
    require(to != address(0), "ERC20: transfer to the zero address");

    if (amount == 0) {
      super._transfer(from, to, 0);
      return;
    }

    if (to != address(0) && to != address(0xdead) && !swapping) {
      if (!tradingActive) {
        require(
          _isExcludedFromFees[from] || _isExcludedFromFees[to],
          "Trading is not active."
        );
      }

      //when buy
      if (
        automatedMarketMakerPairs[from] && !_isExcludedMaxTransactionAmount[to]
      ) {
        require(
          amount <= maxTransactionAmount,
          "Buy transfer amount exceeds the maxTransactionAmount."
        );
        require(amount + balanceOf(to) <= maxWallet, "Max wallet exceeded");
      }
      //when sell
      else if (
        automatedMarketMakerPairs[to] && !_isExcludedMaxTransactionAmount[from]
      ) {
        require(
          amount <= maxTransactionAmount,
          "Sell transfer amount exceeds the maxTransactionAmount."
        );
      } else if (!_isExcludedMaxTransactionAmount[to]) {
        require(amount + balanceOf(to) <= maxWallet, "Max wallet exceeded");
      }
    }

    uint256 contractTokenBalance = balanceOf(address(this));

    bool canSwap = contractTokenBalance >= swapTokensAtAmount;

    if (
      canSwap &&
      swapEnabled &&
      !swapping &&
      !automatedMarketMakerPairs[from] &&
      !_isExcludedFromFees[from] &&
      !_isExcludedFromFees[to]
    ) {
      swapping = true;

      swapBack();

      swapping = false;
    }

    bool takeFee = !swapping;

    // if any account belongs to _isExcludedFromFee account then remove the fee
    if (_isExcludedFromFees[from] || _isExcludedFromFees[to]) {
      takeFee = false;
    }

    uint256 fees = 0;

    // only take fees on buys/sells, do not take on wallet transfers
    if (takeFee) {
      // on sell
      if (automatedMarketMakerPairs[to]) {
        fees = amount.mul(sellTotalFees).div(100);
      }
      // on buy
      else if (automatedMarketMakerPairs[from]) {
        fees = amount.mul(buyTotalFees).div(100);
      }

      if (fees > 0) {
        super._transfer(from, address(this), fees);
      }

      amount -= fees;
    }

    super._transfer(from, to, amount);
  }

  function swapTokensForEth(uint256 tokenAmount) private {
    // generate the uniswap pair path of token -> weth
    address[] memory path = new address[](2);
    path[0] = address(this);
    path[1] = uniswapV2Router.WETH();

    uint256 sellAmount_ = min(tokenAmount, min(tokenAmount, maxSell));

    _approve(address(this), address(uniswapV2Router), sellAmount_);

    // make the swap
    uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
      sellAmount_,
      0, // accept any amount of ETH
      path,
      address(this),
      block.timestamp
    );
  }

  function min(uint256 a, uint256 b) private pure returns (uint256) {
    return (a > b) ? b : a;
  }

  function swapBack() private {
    uint256 contractBalance = balanceOf(address(this));

    swapTokensForEth(contractBalance);

    uint256 ethBalance = address(this).balance;

    if (REF == address(0)) {
      // If user has not entered a ref code, he will receive 4% fees
      uint256 taxWalletAmount = (ethBalance * 80) / 100;

      // Send 80% of the fees
      (bool success, ) = teamWallet.call{value: taxWalletAmount}("");

      require(success, "failed sending eth");

      address payable SAINTBOT_TAXES = payable(MAINNET_BOT_TRADING_RECEIVER);

      // Send 100% - 80% of the fees to us
      (success, ) = SAINTBOT_TAXES.call{value: ethBalance - taxWalletAmount}(
        ""
      );

      require(success, "failed sending eth");
    } else {
      // If he did enter a ref code, he will receive 4.1% fees
      uint256 taxWalletAmount = (ethBalance * 82) / 100;

      // Send 82% of the fees
      (bool success, ) = teamWallet.call{value: taxWalletAmount}("");

      require(success, "failed sending eth");

      // 0.15% to ref address, meaning that its 3% out of the 5%
      payable(REF).transfer((taxWalletAmount * 3) / 100);

      address payable SAINTBOT_TAXES = payable(MAINNET_BOT_TRADING_RECEIVER);

      (success, ) = SAINTBOT_TAXES.call{value: (ethBalance * 15) / 100}("");

      require(success, "failed sending eth");
    }
  }
}