Contract Name:
WickedSundayClubSeasonOne
Contract Source Code:
File 1 of 1 : WickedSundayClubSeasonOne
/**
Author: BlockRocket.tech.
*/
pragma solidity ^0.5.14;
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*
* _Available since v2.4.0._
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*
* _Available since v2.4.0._
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*
* _Available since v2.4.0._
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
contract Context {
// Empty internal constructor, to prevent people from mistakenly deploying
// an instance of this contract, which should be used via inheritance.
constructor () internal { }
// solhint-disable-previous-line no-empty-blocks
function _msgSender() internal view returns (address payable) {
return msg.sender;
}
function _msgData() internal view returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
contract IERC721 is IERC165 {
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of NFTs in `owner`'s account.
*/
function balanceOf(address owner) public view returns (uint256 balance);
/**
* @dev Returns the owner of the NFT specified by `tokenId`.
*/
function ownerOf(uint256 tokenId) public view returns (address owner);
/**
* @dev Transfers a specific NFT (`tokenId`) from one account (`from`) to
* another (`to`).
*
*
*
* Requirements:
* - `from`, `to` cannot be zero.
* - `tokenId` must be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this
* NFT by either {approve} or {setApprovalForAll}.
*/
function safeTransferFrom(address from, address to, uint256 tokenId) public;
/**
* @dev Transfers a specific NFT (`tokenId`) from one account (`from`) to
* another (`to`).
*
* Requirements:
* - If the caller is not `from`, it must be approved to move this NFT by
* either {approve} or {setApprovalForAll}.
*/
function transferFrom(address from, address to, uint256 tokenId) public;
function approve(address to, uint256 tokenId) public;
function getApproved(uint256 tokenId) public view returns (address operator);
function setApprovalForAll(address operator, bool _approved) public;
function isApprovedForAll(address owner, address operator) public view returns (bool);
function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory data) public;
}
contract IERC721Receiver {
/**
* @notice Handle the receipt of an NFT
* @dev The ERC721 smart contract calls this function on the recipient
* after a {IERC721-safeTransferFrom}. This function MUST return the function selector,
* otherwise the caller will revert the transaction. The selector to be
* returned can be obtained as `this.onERC721Received.selector`. This
* function MAY throw to revert and reject the transfer.
* Note: the ERC721 contract address is always the message sender.
* @param operator The address which called `safeTransferFrom` function
* @param from The address which previously owned the token
* @param tokenId The NFT identifier which is being transferred
* @param data Additional data with no specified format
* @return bytes4 `bytes4(keccak256("onERC721Received(address,address,uint256,bytes)"))`
*/
function onERC721Received(address operator, address from, uint256 tokenId, bytes memory data)
public returns (bytes4);
}
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Converts an `address` into `address payable`. Note that this is
* simply a type cast: the actual underlying value is not changed.
*
* _Available since v2.4.0._
*/
function toPayable(address account) internal pure returns (address payable) {
return address(uint160(account));
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*
* _Available since v2.4.0._
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-call-value
(bool success, ) = recipient.call.value(amount)("");
require(success, "Address: unable to send value, recipient may have reverted");
}
}
library Counters {
using SafeMath for uint256;
struct Counter {
// This variable should never be directly accessed by users of the library: interactions must be restricted to
// the library's function. As of Solidity v0.5.2, this cannot be enforced, though there is a proposal to add
// this feature: see https://github.com/ethereum/solidity/issues/4637
uint256 _value; // default: 0
}
function current(Counter storage counter) internal view returns (uint256) {
return counter._value;
}
function increment(Counter storage counter) internal {
// The {SafeMath} overflow check can be skipped here, see the comment at the top
counter._value += 1;
}
function decrement(Counter storage counter) internal {
counter._value = counter._value.sub(1);
}
}
contract ERC165 is IERC165 {
/*
* bytes4(keccak256('supportsInterface(bytes4)')) == 0x01ffc9a7
*/
bytes4 private constant _INTERFACE_ID_ERC165 = 0x01ffc9a7;
/**
* @dev Mapping of interface ids to whether or not it's supported.
*/
mapping(bytes4 => bool) private _supportedInterfaces;
constructor () internal {
// Derived contracts need only register support for their own interfaces,
// we register support for ERC165 itself here
_registerInterface(_INTERFACE_ID_ERC165);
}
/**
* @dev See {IERC165-supportsInterface}.
*
* Time complexity O(1), guaranteed to always use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool) {
return _supportedInterfaces[interfaceId];
}
/**
* @dev Registers the contract as an implementer of the interface defined by
* `interfaceId`. Support of the actual ERC165 interface is automatic and
* registering its interface id is not required.
*
* See {IERC165-supportsInterface}.
*
* Requirements:
*
* - `interfaceId` cannot be the ERC165 invalid interface (`0xffffffff`).
*/
function _registerInterface(bytes4 interfaceId) internal {
require(interfaceId != 0xffffffff, "ERC165: invalid interface id");
_supportedInterfaces[interfaceId] = true;
}
}
contract ERC721 is Context, ERC165, IERC721 {
using SafeMath for uint256;
using Address for address;
using Counters for Counters.Counter;
// Equals to `bytes4(keccak256("onERC721Received(address,address,uint256,bytes)"))`
// which can be also obtained as `IERC721Receiver(0).onERC721Received.selector`
bytes4 private constant _ERC721_RECEIVED = 0x150b7a02;
// Mapping from token ID to owner
mapping (uint256 => address) private _tokenOwner;
// Mapping from token ID to approved address
mapping (uint256 => address) private _tokenApprovals;
// Mapping from owner to number of owned token
mapping (address => Counters.Counter) private _ownedTokensCount;
// Mapping from owner to operator approvals
mapping (address => mapping (address => bool)) private _operatorApprovals;
/*
* bytes4(keccak256('balanceOf(address)')) == 0x70a08231
* bytes4(keccak256('ownerOf(uint256)')) == 0x6352211e
* bytes4(keccak256('approve(address,uint256)')) == 0x095ea7b3
* bytes4(keccak256('getApproved(uint256)')) == 0x081812fc
* bytes4(keccak256('setApprovalForAll(address,bool)')) == 0xa22cb465
* bytes4(keccak256('isApprovedForAll(address,address)')) == 0xe985e9c5
* bytes4(keccak256('transferFrom(address,address,uint256)')) == 0x23b872dd
* bytes4(keccak256('safeTransferFrom(address,address,uint256)')) == 0x42842e0e
* bytes4(keccak256('safeTransferFrom(address,address,uint256,bytes)')) == 0xb88d4fde
*
* => 0x70a08231 ^ 0x6352211e ^ 0x095ea7b3 ^ 0x081812fc ^
* 0xa22cb465 ^ 0xe985e9c ^ 0x23b872dd ^ 0x42842e0e ^ 0xb88d4fde == 0x80ac58cd
*/
bytes4 private constant _INTERFACE_ID_ERC721 = 0x80ac58cd;
constructor () public {
// register the supported interfaces to conform to ERC721 via ERC165
_registerInterface(_INTERFACE_ID_ERC721);
}
/**
* @dev Gets the balance of the specified address.
* @param owner address to query the balance of
* @return uint256 representing the amount owned by the passed address
*/
function balanceOf(address owner) public view returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _ownedTokensCount[owner].current();
}
/**
* @dev Gets the owner of the specified token ID.
* @param tokenId uint256 ID of the token to query the owner of
* @return address currently marked as the owner of the given token ID
*/
function ownerOf(uint256 tokenId) public view returns (address) {
address owner = _tokenOwner[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
/**
* @dev Approves another address to transfer the given token ID
* The zero address indicates there is no approved address.
* There can only be one approved address per token at a given time.
* Can only be called by the token owner or an approved operator.
* @param to address to be approved for the given token ID
* @param tokenId uint256 ID of the token to be approved
*/
function approve(address to, uint256 tokenId) public {
address owner = ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_tokenApprovals[tokenId] = to;
emit Approval(owner, to, tokenId);
}
/**
* @dev Gets the approved address for a token ID, or zero if no address set
* Reverts if the token ID does not exist.
* @param tokenId uint256 ID of the token to query the approval of
* @return address currently approved for the given token ID
*/
function getApproved(uint256 tokenId) public view returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev Sets or unsets the approval of a given operator
* An operator is allowed to transfer all tokens of the sender on their behalf.
* @param to operator address to set the approval
* @param approved representing the status of the approval to be set
*/
function setApprovalForAll(address to, bool approved) public {
require(to != _msgSender(), "ERC721: approve to caller");
_operatorApprovals[_msgSender()][to] = approved;
emit ApprovalForAll(_msgSender(), to, approved);
}
/**
* @dev Tells whether an operator is approved by a given owner.
* @param owner owner address which you want to query the approval of
* @param operator operator address which you want to query the approval of
* @return bool whether the given operator is approved by the given owner
*/
function isApprovedForAll(address owner, address operator) public view returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev Transfers the ownership of a given token ID to another address.
* Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
* Requires the msg.sender to be the owner, approved, or operator.
* @param from current owner of the token
* @param to address to receive the ownership of the given token ID
* @param tokenId uint256 ID of the token to be transferred
*/
function transferFrom(address from, address to, uint256 tokenId) public {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transferFrom(from, to, tokenId);
}
/**
* @dev Safely transfers the ownership of a given token ID to another address
* If the target address is a contract, it must implement {IERC721Receiver-onERC721Received},
* which is called upon a safe transfer, and return the magic value
* `bytes4(keccak256("onERC721Received(address,address,uint256,bytes)"))`; otherwise,
* the transfer is reverted.
* Requires the msg.sender to be the owner, approved, or operator
* @param from current owner of the token
* @param to address to receive the ownership of the given token ID
* @param tokenId uint256 ID of the token to be transferred
*/
function safeTransferFrom(address from, address to, uint256 tokenId) public {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev Safely transfers the ownership of a given token ID to another address
* If the target address is a contract, it must implement {IERC721Receiver-onERC721Received},
* which is called upon a safe transfer, and return the magic value
* `bytes4(keccak256("onERC721Received(address,address,uint256,bytes)"))`; otherwise,
* the transfer is reverted.
* Requires the _msgSender() to be the owner, approved, or operator
* @param from current owner of the token
* @param to address to receive the ownership of the given token ID
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes data to send along with a safe transfer check
*/
function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory _data) public {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransferFrom(from, to, tokenId, _data);
}
/**
* @dev Safely transfers the ownership of a given token ID to another address
* If the target address is a contract, it must implement `onERC721Received`,
* which is called upon a safe transfer, and return the magic value
* `bytes4(keccak256("onERC721Received(address,address,uint256,bytes)"))`; otherwise,
* the transfer is reverted.
* Requires the msg.sender to be the owner, approved, or operator
* @param from current owner of the token
* @param to address to receive the ownership of the given token ID
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes data to send along with a safe transfer check
*/
function _safeTransferFrom(address from, address to, uint256 tokenId, bytes memory _data) internal {
_transferFrom(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether the specified token exists.
* @param tokenId uint256 ID of the token to query the existence of
* @return bool whether the token exists
*/
function _exists(uint256 tokenId) internal view returns (bool) {
address owner = _tokenOwner[tokenId];
return owner != address(0);
}
/**
* @dev Returns whether the given spender can transfer a given token ID.
* @param spender address of the spender to query
* @param tokenId uint256 ID of the token to be transferred
* @return bool whether the msg.sender is approved for the given token ID,
* is an operator of the owner, or is the owner of the token
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Internal function to safely mint a new token.
* Reverts if the given token ID already exists.
* If the target address is a contract, it must implement `onERC721Received`,
* which is called upon a safe transfer, and return the magic value
* `bytes4(keccak256("onERC721Received(address,address,uint256,bytes)"))`; otherwise,
* the transfer is reverted.
* @param to The address that will own the minted token
* @param tokenId uint256 ID of the token to be minted
*/
function _safeMint(address to, uint256 tokenId) internal {
_safeMint(to, tokenId, "");
}
/**
* @dev Internal function to safely mint a new token.
* Reverts if the given token ID already exists.
* If the target address is a contract, it must implement `onERC721Received`,
* which is called upon a safe transfer, and return the magic value
* `bytes4(keccak256("onERC721Received(address,address,uint256,bytes)"))`; otherwise,
* the transfer is reverted.
* @param to The address that will own the minted token
* @param tokenId uint256 ID of the token to be minted
* @param _data bytes data to send along with a safe transfer check
*/
function _safeMint(address to, uint256 tokenId, bytes memory _data) internal {
_mint(to, tokenId);
require(_checkOnERC721Received(address(0), to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Internal function to mint a new token.
* Reverts if the given token ID already exists.
* @param to The address that will own the minted token
* @param tokenId uint256 ID of the token to be minted
*/
function _mint(address to, uint256 tokenId) internal {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_tokenOwner[tokenId] = to;
_ownedTokensCount[to].increment();
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Internal function to burn a specific token.
* Reverts if the token does not exist.
* Deprecated, use {_burn} instead.
* @param owner owner of the token to burn
* @param tokenId uint256 ID of the token being burned
*/
function _burn(address owner, uint256 tokenId) internal {
require(ownerOf(tokenId) == owner, "ERC721: burn of token that is not own");
_clearApproval(tokenId);
_ownedTokensCount[owner].decrement();
_tokenOwner[tokenId] = address(0);
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Internal function to burn a specific token.
* Reverts if the token does not exist.
* @param tokenId uint256 ID of the token being burned
*/
function _burn(uint256 tokenId) internal {
_burn(ownerOf(tokenId), tokenId);
}
/**
* @dev Internal function to transfer ownership of a given token ID to another address.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
* @param from current owner of the token
* @param to address to receive the ownership of the given token ID
* @param tokenId uint256 ID of the token to be transferred
*/
function _transferFrom(address from, address to, uint256 tokenId) internal {
require(ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
require(to != address(0), "ERC721: transfer to the zero address");
_clearApproval(tokenId);
_ownedTokensCount[from].decrement();
_ownedTokensCount[to].increment();
_tokenOwner[tokenId] = to;
emit Transfer(from, to, tokenId);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* This is an internal detail of the `ERC721` contract and its use is deprecated.
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(address from, address to, uint256 tokenId, bytes memory _data)
internal returns (bool)
{
if (!to.isContract()) {
return true;
}
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = to.call(abi.encodeWithSelector(
IERC721Receiver(to).onERC721Received.selector,
_msgSender(),
from,
tokenId,
_data
));
if (!success) {
if (returndata.length > 0) {
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert("ERC721: transfer to non ERC721Receiver implementer");
}
} else {
bytes4 retval = abi.decode(returndata, (bytes4));
return (retval == _ERC721_RECEIVED);
}
}
/**
* @dev Private function to clear current approval of a given token ID.
* @param tokenId uint256 ID of the token to be transferred
*/
function _clearApproval(uint256 tokenId) private {
if (_tokenApprovals[tokenId] != address(0)) {
_tokenApprovals[tokenId] = address(0);
}
}
}
contract IERC721Enumerable is IERC721 {
function totalSupply() public view returns (uint256);
function tokenOfOwnerByIndex(address owner, uint256 index) public view returns (uint256 tokenId);
function tokenByIndex(uint256 index) public view returns (uint256);
}
contract ERC721Enumerable is Context, ERC165, ERC721, IERC721Enumerable {
// Mapping from owner to list of owned token IDs
mapping(address => uint256[]) private _ownedTokens;
// Mapping from token ID to index of the owner tokens list
mapping(uint256 => uint256) private _ownedTokensIndex;
// Array with all token ids, used for enumeration
uint256[] private _allTokens;
// Mapping from token id to position in the allTokens array
mapping(uint256 => uint256) private _allTokensIndex;
/*
* bytes4(keccak256('totalSupply()')) == 0x18160ddd
* bytes4(keccak256('tokenOfOwnerByIndex(address,uint256)')) == 0x2f745c59
* bytes4(keccak256('tokenByIndex(uint256)')) == 0x4f6ccce7
*
* => 0x18160ddd ^ 0x2f745c59 ^ 0x4f6ccce7 == 0x780e9d63
*/
bytes4 private constant _INTERFACE_ID_ERC721_ENUMERABLE = 0x780e9d63;
/**
* @dev Constructor function.
*/
constructor () public {
// register the supported interface to conform to ERC721Enumerable via ERC165
_registerInterface(_INTERFACE_ID_ERC721_ENUMERABLE);
}
/**
* @dev Gets the token ID at a given index of the tokens list of the requested owner.
* @param owner address owning the tokens list to be accessed
* @param index uint256 representing the index to be accessed of the requested tokens list
* @return uint256 token ID at the given index of the tokens list owned by the requested address
*/
function tokenOfOwnerByIndex(address owner, uint256 index) public view returns (uint256) {
require(index < balanceOf(owner), "ERC721Enumerable: owner index out of bounds");
return _ownedTokens[owner][index];
}
/**
* @dev Gets the total amount of tokens stored by the contract.
* @return uint256 representing the total amount of tokens
*/
function totalSupply() public view returns (uint256) {
return _allTokens.length;
}
/**
* @dev Gets the token ID at a given index of all the tokens in this contract
* Reverts if the index is greater or equal to the total number of tokens.
* @param index uint256 representing the index to be accessed of the tokens list
* @return uint256 token ID at the given index of the tokens list
*/
function tokenByIndex(uint256 index) public view returns (uint256) {
require(index < totalSupply(), "ERC721Enumerable: global index out of bounds");
return _allTokens[index];
}
/**
* @dev Internal function to transfer ownership of a given token ID to another address.
* As opposed to transferFrom, this imposes no restrictions on msg.sender.
* @param from current owner of the token
* @param to address to receive the ownership of the given token ID
* @param tokenId uint256 ID of the token to be transferred
*/
function _transferFrom(address from, address to, uint256 tokenId) internal {
super._transferFrom(from, to, tokenId);
_removeTokenFromOwnerEnumeration(from, tokenId);
_addTokenToOwnerEnumeration(to, tokenId);
}
/**
* @dev Internal function to mint a new token.
* Reverts if the given token ID already exists.
* @param to address the beneficiary that will own the minted token
* @param tokenId uint256 ID of the token to be minted
*/
function _mint(address to, uint256 tokenId) internal {
super._mint(to, tokenId);
_addTokenToOwnerEnumeration(to, tokenId);
_addTokenToAllTokensEnumeration(tokenId);
}
/**
* @dev Internal function to burn a specific token.
* Reverts if the token does not exist.
* Deprecated, use {ERC721-_burn} instead.
* @param owner owner of the token to burn
* @param tokenId uint256 ID of the token being burned
*/
function _burn(address owner, uint256 tokenId) internal {
super._burn(owner, tokenId);
_removeTokenFromOwnerEnumeration(owner, tokenId);
// Since tokenId will be deleted, we can clear its slot in _ownedTokensIndex to trigger a gas refund
_ownedTokensIndex[tokenId] = 0;
_removeTokenFromAllTokensEnumeration(tokenId);
}
/**
* @dev Gets the list of token IDs of the requested owner.
* @param owner address owning the tokens
* @return uint256[] List of token IDs owned by the requested address
*/
function _tokensOfOwner(address owner) internal view returns (uint256[] storage) {
return _ownedTokens[owner];
}
/**
* @dev Private function to add a token to this extension's ownership-tracking data structures.
* @param to address representing the new owner of the given token ID
* @param tokenId uint256 ID of the token to be added to the tokens list of the given address
*/
function _addTokenToOwnerEnumeration(address to, uint256 tokenId) private {
_ownedTokensIndex[tokenId] = _ownedTokens[to].length;
_ownedTokens[to].push(tokenId);
}
/**
* @dev Private function to add a token to this extension's token tracking data structures.
* @param tokenId uint256 ID of the token to be added to the tokens list
*/
function _addTokenToAllTokensEnumeration(uint256 tokenId) private {
_allTokensIndex[tokenId] = _allTokens.length;
_allTokens.push(tokenId);
}
/**
* @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
* while the token is not assigned a new owner, the `_ownedTokensIndex` mapping is _not_ updated: this allows for
* gas optimizations e.g. when performing a transfer operation (avoiding double writes).
* This has O(1) time complexity, but alters the order of the _ownedTokens array.
* @param from address representing the previous owner of the given token ID
* @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
*/
function _removeTokenFromOwnerEnumeration(address from, uint256 tokenId) private {
// To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = _ownedTokens[from].length.sub(1);
uint256 tokenIndex = _ownedTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary
if (tokenIndex != lastTokenIndex) {
uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];
_ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
}
// This also deletes the contents at the last position of the array
_ownedTokens[from].length--;
// Note that _ownedTokensIndex[tokenId] hasn't been cleared: it still points to the old slot (now occupied by
// lastTokenId, or just over the end of the array if the token was the last one).
}
/**
* @dev Private function to remove a token from this extension's token tracking data structures.
* This has O(1) time complexity, but alters the order of the _allTokens array.
* @param tokenId uint256 ID of the token to be removed from the tokens list
*/
function _removeTokenFromAllTokensEnumeration(uint256 tokenId) private {
// To prevent a gap in the tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = _allTokens.length.sub(1);
uint256 tokenIndex = _allTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary. However, since this occurs so
// rarely (when the last minted token is burnt) that we still do the swap here to avoid the gas cost of adding
// an 'if' statement (like in _removeTokenFromOwnerEnumeration)
uint256 lastTokenId = _allTokens[lastTokenIndex];
_allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
// This also deletes the contents at the last position of the array
_allTokens.length--;
_allTokensIndex[tokenId] = 0;
}
}
contract IERC721Metadata is IERC721 {
function name() external view returns (string memory);
function symbol() external view returns (string memory);
function tokenURI(uint256 tokenId) external view returns (string memory);
}
contract ERC721Metadata is Context, ERC165, ERC721, IERC721Metadata {
// Token name
string private _name;
// Token symbol
string private _symbol;
// Base URI
string private _baseURI;
// Optional mapping for token URIs
mapping(uint256 => string) private _tokenURIs;
/*
* bytes4(keccak256('name()')) == 0x06fdde03
* bytes4(keccak256('symbol()')) == 0x95d89b41
* bytes4(keccak256('tokenURI(uint256)')) == 0xc87b56dd
*
* => 0x06fdde03 ^ 0x95d89b41 ^ 0xc87b56dd == 0x5b5e139f
*/
bytes4 private constant _INTERFACE_ID_ERC721_METADATA = 0x5b5e139f;
/**
* @dev Constructor function
*/
constructor (string memory name, string memory symbol) public {
_name = name;
_symbol = symbol;
// register the supported interfaces to conform to ERC721 via ERC165
_registerInterface(_INTERFACE_ID_ERC721_METADATA);
}
/**
* @dev Gets the token name.
* @return string representing the token name
*/
function name() external view returns (string memory) {
return _name;
}
/**
* @dev Gets the token symbol.
* @return string representing the token symbol
*/
function symbol() external view returns (string memory) {
return _symbol;
}
/**
* @dev Returns the URI for a given token ID. May return an empty string.
*
* If the token's URI is non-empty and a base URI was set (via
* {_setBaseURI}), it will be added to the token ID's URI as a prefix.
*
* Reverts if the token ID does not exist.
*/
function tokenURI(uint256 tokenId) external view returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory _tokenURI = _tokenURIs[tokenId];
// Even if there is a base URI, it is only appended to non-empty token-specific URIs
if (bytes(_tokenURI).length == 0) {
return "";
} else {
// abi.encodePacked is being used to concatenate strings
return string(abi.encodePacked(_baseURI, _tokenURI));
}
}
/**
* @dev Internal function to set the token URI for a given token.
*
* Reverts if the token ID does not exist.
*
* TIP: if all token IDs share a prefix (e.g. if your URIs look like
* `http://api.myproject.com/token/<id>`), use {_setBaseURI} to store
* it and save gas.
*/
function _setTokenURI(uint256 tokenId, string memory _tokenURI) internal {
require(_exists(tokenId), "ERC721Metadata: URI set of nonexistent token");
_tokenURIs[tokenId] = _tokenURI;
}
/**
* @dev Internal function to set the base URI for all token IDs. It is
* automatically added as a prefix to the value returned in {tokenURI}.
*
* _Available since v2.5.0._
*/
function _setBaseURI(string memory baseURI) internal {
_baseURI = baseURI;
}
/**
* @dev Returns the base URI set via {_setBaseURI}. This will be
* automatically added as a preffix in {tokenURI} to each token's URI, when
* they are non-empty.
*
* _Available since v2.5.0._
*/
function baseURI() external view returns (string memory) {
return _baseURI;
}
/**
* @dev Internal function to burn a specific token.
* Reverts if the token does not exist.
* Deprecated, use _burn(uint256) instead.
* @param owner owner of the token to burn
* @param tokenId uint256 ID of the token being burned by the msg.sender
*/
function _burn(address owner, uint256 tokenId) internal {
super._burn(owner, tokenId);
// Clear metadata (if any)
if (bytes(_tokenURIs[tokenId]).length != 0) {
delete _tokenURIs[tokenId];
}
}
}
contract ERC721Full is ERC721, ERC721Enumerable, ERC721Metadata {
constructor (string memory name, string memory symbol) public ERC721Metadata(name, symbol) {
// solhint-disable-previous-line no-empty-blocks
}
}
contract ReentrancyGuard {
bool private _notEntered;
constructor () internal {
// Storing an initial non-zero value makes deployment a bit more
// expensive, but in exchange the refund on every call to nonReentrant
// will be lower in amount. Since refunds are capped to a percetange of
// the total transaction's gas, it is best to keep them low in cases
// like this one, to increase the likelihood of the full refund coming
// into effect.
_notEntered = true;
}
/**
* @dev Prevents a contract from calling itself, directly or indirectly.
* Calling a `nonReentrant` function from another `nonReentrant`
* function is not supported. It is possible to prevent this from happening
* by making the `nonReentrant` function external, and make it call a
* `private` function that does the actual work.
*/
modifier nonReentrant() {
// On the first call to nonReentrant, _notEntered will be true
require(_notEntered, "ReentrancyGuard: reentrant call");
// Any calls to nonReentrant after this point will fail
_notEntered = false;
_;
// By storing the original value once again, a refund is triggered (see
// https://eips.ethereum.org/EIPS/eip-2200)
_notEntered = true;
}
}
library Roles {
struct Role {
mapping (address => bool) bearer;
}
/**
* @dev Give an account access to this role.
*/
function add(Role storage role, address account) internal {
require(!has(role, account), "Roles: account already has role");
role.bearer[account] = true;
}
/**
* @dev Remove an account's access to this role.
*/
function remove(Role storage role, address account) internal {
require(has(role, account), "Roles: account does not have role");
role.bearer[account] = false;
}
/**
* @dev Check if an account has this role.
* @return bool
*/
function has(Role storage role, address account) internal view returns (bool) {
require(account != address(0), "Roles: account is the zero address");
return role.bearer[account];
}
}
contract WhitelistAdminRole is Context {
using Roles for Roles.Role;
event WhitelistAdminAdded(address indexed account);
event WhitelistAdminRemoved(address indexed account);
Roles.Role private _whitelistAdmins;
constructor () internal {
_addWhitelistAdmin(_msgSender());
}
modifier onlyWhitelistAdmin() {
require(isWhitelistAdmin(_msgSender()), "WhitelistAdminRole: caller does not have the WhitelistAdmin role");
_;
}
function isWhitelistAdmin(address account) public view returns (bool) {
return _whitelistAdmins.has(account);
}
function addWhitelistAdmin(address account) public onlyWhitelistAdmin {
_addWhitelistAdmin(account);
}
function renounceWhitelistAdmin() public {
_removeWhitelistAdmin(_msgSender());
}
function _addWhitelistAdmin(address account) internal {
_whitelistAdmins.add(account);
emit WhitelistAdminAdded(account);
}
function _removeWhitelistAdmin(address account) internal {
_whitelistAdmins.remove(account);
emit WhitelistAdminRemoved(account);
}
}
contract WhitelistedRole is Context, WhitelistAdminRole {
using Roles for Roles.Role;
event WhitelistedAdded(address indexed account);
event WhitelistedRemoved(address indexed account);
Roles.Role private _whitelisteds;
modifier onlyWhitelisted() {
require(isWhitelisted(_msgSender()), "WhitelistedRole: caller does not have the Whitelisted role");
_;
}
function isWhitelisted(address account) public view returns (bool) {
return _whitelisteds.has(account);
}
function addWhitelisted(address account) public onlyWhitelistAdmin {
_addWhitelisted(account);
}
function removeWhitelisted(address account) public onlyWhitelistAdmin {
_removeWhitelisted(account);
}
function renounceWhitelisted() public {
_removeWhitelisted(_msgSender());
}
function _addWhitelisted(address account) internal {
_whitelisteds.add(account);
emit WhitelistedAdded(account);
}
function _removeWhitelisted(address account) internal {
_whitelisteds.remove(account);
emit WhitelistedRemoved(account);
}
}
contract MetaFactoryWhitelist is WhitelistedRole {
constructor() public {
super.addWhitelisted(msg.sender);
}
}
contract WickedSundayClubSeasonOne is ERC721Full, ReentrancyGuard {
using SafeMath for uint256;
event Purchased(
address indexed _owner,
uint256 indexed _tokenId,
uint256 _price,
uint256 _timestamp,
uint8 _size
);
struct Purchase {
address owner;
uint256 tokenId;
uint256 price;
uint256 timestamp;
uint8 size;
string metadata;
}
MetaFactoryWhitelist public whitelist;
uint256 public tokenPointer = 0;
mapping(uint256 => Purchase) public tokenIdToPurchase;
mapping(uint256 => string) public sizeToMetadata;
uint256 public maxSupply;
uint256 public startPriceInWei;
uint256 public stepPriceInWei;
uint256 public startTimeInSecs;
address payable public fundsAccount;
modifier onlyWhenWhitelisted() {
require(whitelist.isWhitelisted(msg.sender), "Caller is not whitelisted");
_;
}
constructor (
MetaFactoryWhitelist _whitelist,
uint256 _maxSupply,
uint256 _startPriceInWei,
uint256 _stepPriceInWei,
uint256 _startTimeInSecs,
address payable _fundsAccount
) public ERC721Full("WSC Season One Pass", "WSCS1P") {
whitelist = _whitelist;
maxSupply = _maxSupply;
startPriceInWei = _startPriceInWei;
stepPriceInWei = _stepPriceInWei;
startTimeInSecs = _startTimeInSecs;
fundsAccount = _fundsAccount;
sizeToMetadata[0] = "https://ipfs.infura.io/ipfs/QmYxLhrchYHussqitGp1pPvVJtzunsmqyo8axhNEeEc3bE"; // S
sizeToMetadata[1] = "https://ipfs.infura.io/ipfs/QmckuS3YfxXFRxj7PRLFz7NcKr3gx4rDvKddihZepbqjXX"; // M
sizeToMetadata[2] = "https://ipfs.infura.io/ipfs/QmPVabCJYS3LSrP4aJQqWKPs7wmAja6BHY8ZtYww9cFMVk"; // L
sizeToMetadata[3] = "https://ipfs.infura.io/ipfs/QmRB8PCn1xYfSSGnbRi9cfocDieg5tuiodtwx73bmwr6zK"; // XL
}
function purchaseItem(uint8 _size) nonReentrant external payable returns (bool) {
require(_size >= 0 && _size <= 3, "Size not valid");
require(now > startTimeInSecs, "Sale not open yet");
// calculate before incrementing pointer
uint256 price = priceOfItem(tokenPointer);
require(msg.value >= price, "Must send at least next price");
tokenPointer = tokenPointer.add(1);
uint256 tokenId = tokenPointer;
require(tokenId <= maxSupply, "Can only mint a limited supply");
_mint(msg.sender, tokenId);
_setTokenURI(tokenId, sizeToMetadata[_size]);
tokenIdToPurchase[tokenId] = Purchase({
owner : msg.sender,
tokenId : tokenId,
price : price,
timestamp : now,
size : _size,
metadata: sizeToMetadata[_size]
});
// refund if sent more than required price
if (msg.value > price) {
(bool success,) = msg.sender.call.value(msg.value.sub(price))("");
require(success, "Refund failed");
}
// send to MF account
(bool success,) = fundsAccount.call.value(price)("");
require(success, "Transfer failed");
emit Purchased(msg.sender, tokenId, price, now, _size);
return true;
}
function priceOfItem(uint256 _index) public view returns (uint256) {
return startPriceInWei.add(_index.mul(stepPriceInWei));
}
// whitelisted access controls
function setStartTimeInSecs(uint256 _startTimeInSecs) onlyWhenWhitelisted external {
startTimeInSecs = _startTimeInSecs;
}
function setStartPriceInWei(uint256 _startPriceInWei) onlyWhenWhitelisted external {
startPriceInWei = _startPriceInWei;
}
function setStepPriceInWei(uint256 _stepPriceInWei) onlyWhenWhitelisted external {
stepPriceInWei = _stepPriceInWei;
}
}