Contract Source Code:

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {Pool} from "../libraries/Pool.sol";

import {IERC165} from "../../vendor/openzeppelin-solidity/v5.0.2/contracts/utils/introspection/IERC165.sol";

/// @notice Shared public interface for multiple V1 pool types.
/// Each pool type handles a different child token model (lock/unlock, mint/burn.)
interface IPoolV1 is IERC165 {
  /// @notice Lock tokens into the pool or burn the tokens.
  /// @param lockOrBurnIn Encoded data fields for the processing of tokens on the source chain.
  /// @return lockOrBurnOut Encoded data fields for the processing of tokens on the destination chain.
  function lockOrBurn(
    Pool.LockOrBurnInV1 calldata lockOrBurnIn
  ) external returns (Pool.LockOrBurnOutV1 memory lockOrBurnOut);

  /// @notice Releases or mints tokens to the receiver address.
  /// @param releaseOrMintIn All data required to release or mint tokens.
  /// @return releaseOrMintOut The amount of tokens released or minted on the local chain, denominated
  /// in the local token's decimals.
  /// @dev The offramp asserts that the balanceOf of the receiver has been incremented by exactly the number
  /// of tokens that is returned in ReleaseOrMintOutV1.destinationAmount. If the amounts do not match, the tx reverts.
  function releaseOrMint(
    Pool.ReleaseOrMintInV1 calldata releaseOrMintIn
  ) external returns (Pool.ReleaseOrMintOutV1 memory);

  /// @notice Checks whether a remote chain is supported in the token pool.
  /// @param remoteChainSelector The selector of the remote chain.
  /// @return true if the given chain is a permissioned remote chain.
  function isSupportedChain(uint64 remoteChainSelector) external view returns (bool);

  /// @notice Returns if the token pool supports the given token.
  /// @param token The address of the token.
  /// @return true if the token is supported by the pool.
  function isSupportedToken(address token) external view returns (bool);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

/// @notice This interface contains the only RMN-related functions that might be used on-chain by other CCIP contracts.
interface IRMN {
  /// @notice A Merkle root tagged with the address of the commit store contract it is destined for.
  struct TaggedRoot {
    address commitStore;
    bytes32 root;
  }

  /// @notice Callers MUST NOT cache the return value as a blessed tagged root could become unblessed.
  function isBlessed(TaggedRoot calldata taggedRoot) external view returns (bool);

  /// @notice Iff there is an active global or legacy curse, this function returns true.
  function isCursed() external view returns (bool);

  /// @notice Iff there is an active global curse, or an active curse for `subject`, this function returns true.
  /// @param subject To check whether a particular chain is cursed, set to bytes16(uint128(chainSelector)).
  function isCursed(bytes16 subject) external view returns (bool);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {Client} from "../libraries/Client.sol";

interface IRouter {
  error OnlyOffRamp();

  /// @notice Route the message to its intended receiver contract.
  /// @param message Client.Any2EVMMessage struct.
  /// @param gasForCallExactCheck of params for exec
  /// @param gasLimit set of params for exec
  /// @param receiver set of params for exec
  /// @dev if the receiver is a contracts that signals support for CCIP execution through EIP-165.
  /// the contract is called. If not, only tokens are transferred.
  /// @return success A boolean value indicating whether the ccip message was received without errors.
  /// @return retBytes A bytes array containing return data form CCIP receiver.
  /// @return gasUsed the gas used by the external customer call. Does not include any overhead.
  function routeMessage(
    Client.Any2EVMMessage calldata message,
    uint16 gasForCallExactCheck,
    uint256 gasLimit,
    address receiver
  ) external returns (bool success, bytes memory retBytes, uint256 gasUsed);

  /// @notice Returns the configured onramp for a specific destination chain.
  /// @param destChainSelector The destination chain Id to get the onRamp for.
  /// @return onRampAddress The address of the onRamp.
  function getOnRamp(uint64 destChainSelector) external view returns (address onRampAddress);

  /// @notice Return true if the given offRamp is a configured offRamp for the given source chain.
  /// @param sourceChainSelector The source chain selector to check.
  /// @param offRamp The address of the offRamp to check.
  function isOffRamp(uint64 sourceChainSelector, address offRamp) external view returns (bool isOffRamp);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;

import {Client} from "../libraries/Client.sol";

interface IRouterClient {
  error UnsupportedDestinationChain(uint64 destChainSelector);
  error InsufficientFeeTokenAmount();
  error InvalidMsgValue();

  /// @notice Checks if the given chain ID is supported for sending/receiving.
  /// @param destChainSelector The chain to check.
  /// @return supported is true if it is supported, false if not.
  function isChainSupported(uint64 destChainSelector) external view returns (bool supported);

  /// @param destinationChainSelector The destination chainSelector
  /// @param message The cross-chain CCIP message including data and/or tokens
  /// @return fee returns execution fee for the message
  /// delivery to destination chain, denominated in the feeToken specified in the message.
  /// @dev Reverts with appropriate reason upon invalid message.
  function getFee(
    uint64 destinationChainSelector,
    Client.EVM2AnyMessage memory message
  ) external view returns (uint256 fee);

  /// @notice Request a message to be sent to the destination chain
  /// @param destinationChainSelector The destination chain ID
  /// @param message The cross-chain CCIP message including data and/or tokens
  /// @return messageId The message ID
  /// @dev Note if msg.value is larger than the required fee (from getFee) we accept
  /// the overpayment with no refund.
  /// @dev Reverts with appropriate reason upon invalid message.
  function ccipSend(
    uint64 destinationChainSelector,
    Client.EVM2AnyMessage calldata message
  ) external payable returns (bytes32);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

// End consumer library.
library Client {
  /// @dev RMN depends on this struct, if changing, please notify the RMN maintainers.
  struct EVMTokenAmount {
    address token; // token address on the local chain.
    uint256 amount; // Amount of tokens.
  }

  struct Any2EVMMessage {
    bytes32 messageId; // MessageId corresponding to ccipSend on source.
    uint64 sourceChainSelector; // Source chain selector.
    bytes sender; // abi.decode(sender) if coming from an EVM chain.
    bytes data; // payload sent in original message.
    EVMTokenAmount[] destTokenAmounts; // Tokens and their amounts in their destination chain representation.
  }

  // If extraArgs is empty bytes, the default is 200k gas limit.
  struct EVM2AnyMessage {
    bytes receiver; // abi.encode(receiver address) for dest EVM chains
    bytes data; // Data payload
    EVMTokenAmount[] tokenAmounts; // Token transfers
    address feeToken; // Address of feeToken. address(0) means you will send msg.value.
    bytes extraArgs; // Populate this with _argsToBytes(EVMExtraArgsV2)
  }

  // bytes4(keccak256("CCIP EVMExtraArgsV1"));
  bytes4 public constant EVM_EXTRA_ARGS_V1_TAG = 0x97a657c9;

  struct EVMExtraArgsV1 {
    uint256 gasLimit;
  }

  function _argsToBytes(EVMExtraArgsV1 memory extraArgs) internal pure returns (bytes memory bts) {
    return abi.encodeWithSelector(EVM_EXTRA_ARGS_V1_TAG, extraArgs);
  }

  // bytes4(keccak256("CCIP EVMExtraArgsV2"));
  bytes4 public constant EVM_EXTRA_ARGS_V2_TAG = 0x181dcf10;

  /// @param gasLimit: gas limit for the callback on the destination chain.
  /// @param allowOutOfOrderExecution: if true, it indicates that the message can be executed in any order relative to other messages from the same sender.
  /// This value's default varies by chain. On some chains, a particular value is enforced, meaning if the expected value
  /// is not set, the message request will revert.
  struct EVMExtraArgsV2 {
    uint256 gasLimit;
    bool allowOutOfOrderExecution;
  }

  function _argsToBytes(EVMExtraArgsV2 memory extraArgs) internal pure returns (bytes memory bts) {
    return abi.encodeWithSelector(EVM_EXTRA_ARGS_V2_TAG, extraArgs);
  }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

/// @notice This library contains various token pool functions to aid constructing the return data.
library Pool {
  // The tag used to signal support for the pool v1 standard
  // bytes4(keccak256("CCIP_POOL_V1"))
  bytes4 public constant CCIP_POOL_V1 = 0xaff2afbf;

  // The number of bytes in the return data for a pool v1 releaseOrMint call.
  // This should match the size of the ReleaseOrMintOutV1 struct.
  uint16 public constant CCIP_POOL_V1_RET_BYTES = 32;

  // The default max number of bytes in the return data for a pool v1 lockOrBurn call.
  // This data can be used to send information to the destination chain token pool. Can be overwritten
  // in the TokenTransferFeeConfig.destBytesOverhead if more data is required.
  uint32 public constant CCIP_LOCK_OR_BURN_V1_RET_BYTES = 32;

  struct LockOrBurnInV1 {
    bytes receiver; //  The recipient of the tokens on the destination chain, abi encoded
    uint64 remoteChainSelector; // ─╮ The chain ID of the destination chain
    address originalSender; // ─────╯ The original sender of the tx on the source chain
    uint256 amount; //  The amount of tokens to lock or burn, denominated in the source token's decimals
    address localToken; //  The address on this chain of the token to lock or burn
  }

  struct LockOrBurnOutV1 {
    // The address of the destination token, abi encoded in the case of EVM chains
    // This value is UNTRUSTED as any pool owner can return whatever value they want.
    bytes destTokenAddress;
    // Optional pool data to be transferred to the destination chain. Be default this is capped at
    // CCIP_LOCK_OR_BURN_V1_RET_BYTES bytes. If more data is required, the TokenTransferFeeConfig.destBytesOverhead
    // has to be set for the specific token.
    bytes destPoolData;
  }

  struct ReleaseOrMintInV1 {
    bytes originalSender; //          The original sender of the tx on the source chain
    uint64 remoteChainSelector; // ─╮ The chain ID of the source chain
    address receiver; // ───────────╯ The recipient of the tokens on the destination chain.
    uint256 amount; //                The amount of tokens to release or mint, denominated in the source token's decimals
    address localToken; //            The address on this chain of the token to release or mint
    /// @dev WARNING: sourcePoolAddress should be checked prior to any processing of funds. Make sure it matches the
    /// expected pool address for the given remoteChainSelector.
    bytes sourcePoolAddress; //       The address of the source pool, abi encoded in the case of EVM chains
    bytes sourcePoolData; //          The data received from the source pool to process the release or mint
    /// @dev WARNING: offchainTokenData is untrusted data.
    bytes offchainTokenData; //       The offchain data to process the release or mint
  }

  struct ReleaseOrMintOutV1 {
    // The number of tokens released or minted on the destination chain, denominated in the local token's decimals.
    // This value is expected to be equal to the ReleaseOrMintInV1.amount in the case where the source and destination
    // chain have the same number of decimals.
    uint256 destinationAmount;
  }
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.4;

/// @notice Implements Token Bucket rate limiting.
/// @dev uint128 is safe for rate limiter state.
/// For USD value rate limiting, it can adequately store USD value in 18 decimals.
/// For ERC20 token amount rate limiting, all tokens that will be listed will have at most
/// a supply of uint128.max tokens, and it will therefore not overflow the bucket.
/// In exceptional scenarios where tokens consumed may be larger than uint128,
/// e.g. compromised issuer, an enabled RateLimiter will check and revert.
library RateLimiter {
  error BucketOverfilled();
  error OnlyCallableByAdminOrOwner();
  error TokenMaxCapacityExceeded(uint256 capacity, uint256 requested, address tokenAddress);
  error TokenRateLimitReached(uint256 minWaitInSeconds, uint256 available, address tokenAddress);
  error AggregateValueMaxCapacityExceeded(uint256 capacity, uint256 requested);
  error AggregateValueRateLimitReached(uint256 minWaitInSeconds, uint256 available);
  error InvalidRateLimitRate(Config rateLimiterConfig);
  error DisabledNonZeroRateLimit(Config config);
  error RateLimitMustBeDisabled();

  event TokensConsumed(uint256 tokens);
  event ConfigChanged(Config config);

  struct TokenBucket {
    uint128 tokens; // ──────╮ Current number of tokens that are in the bucket.
    uint32 lastUpdated; //   │ Timestamp in seconds of the last token refill, good for 100+ years.
    bool isEnabled; // ──────╯ Indication whether the rate limiting is enabled or not
    uint128 capacity; // ────╮ Maximum number of tokens that can be in the bucket.
    uint128 rate; // ────────╯ Number of tokens per second that the bucket is refilled.
  }

  struct Config {
    bool isEnabled; // Indication whether the rate limiting should be enabled
    uint128 capacity; // ────╮ Specifies the capacity of the rate limiter
    uint128 rate; //  ───────╯ Specifies the rate of the rate limiter
  }

  /// @notice _consume removes the given tokens from the pool, lowering the
  /// rate tokens allowed to be consumed for subsequent calls.
  /// @param requestTokens The total tokens to be consumed from the bucket.
  /// @param tokenAddress The token to consume capacity for, use 0x0 to indicate aggregate value capacity.
  /// @dev Reverts when requestTokens exceeds bucket capacity or available tokens in the bucket
  /// @dev emits removal of requestTokens if requestTokens is > 0
  function _consume(TokenBucket storage s_bucket, uint256 requestTokens, address tokenAddress) internal {
    // If there is no value to remove or rate limiting is turned off, skip this step to reduce gas usage
    if (!s_bucket.isEnabled || requestTokens == 0) {
      return;
    }

    uint256 tokens = s_bucket.tokens;
    uint256 capacity = s_bucket.capacity;
    uint256 timeDiff = block.timestamp - s_bucket.lastUpdated;

    if (timeDiff != 0) {
      if (tokens > capacity) revert BucketOverfilled();

      // Refill tokens when arriving at a new block time
      tokens = _calculateRefill(capacity, tokens, timeDiff, s_bucket.rate);

      s_bucket.lastUpdated = uint32(block.timestamp);
    }

    if (capacity < requestTokens) {
      // Token address 0 indicates consuming aggregate value rate limit capacity.
      if (tokenAddress == address(0)) revert AggregateValueMaxCapacityExceeded(capacity, requestTokens);
      revert TokenMaxCapacityExceeded(capacity, requestTokens, tokenAddress);
    }
    if (tokens < requestTokens) {
      uint256 rate = s_bucket.rate;
      // Wait required until the bucket is refilled enough to accept this value, round up to next higher second
      // Consume is not guaranteed to succeed after wait time passes if there is competing traffic.
      // This acts as a lower bound of wait time.
      uint256 minWaitInSeconds = ((requestTokens - tokens) + (rate - 1)) / rate;

      if (tokenAddress == address(0)) revert AggregateValueRateLimitReached(minWaitInSeconds, tokens);
      revert TokenRateLimitReached(minWaitInSeconds, tokens, tokenAddress);
    }
    tokens -= requestTokens;

    // Downcast is safe here, as tokens is not larger than capacity
    s_bucket.tokens = uint128(tokens);
    emit TokensConsumed(requestTokens);
  }

  /// @notice Gets the token bucket with its values for the block it was requested at.
  /// @return The token bucket.
  function _currentTokenBucketState(TokenBucket memory bucket) internal view returns (TokenBucket memory) {
    // We update the bucket to reflect the status at the exact time of the
    // call. This means we might need to refill a part of the bucket based
    // on the time that has passed since the last update.
    bucket.tokens =
      uint128(_calculateRefill(bucket.capacity, bucket.tokens, block.timestamp - bucket.lastUpdated, bucket.rate));
    bucket.lastUpdated = uint32(block.timestamp);
    return bucket;
  }

  /// @notice Sets the rate limited config.
  /// @param s_bucket The token bucket
  /// @param config The new config
  function _setTokenBucketConfig(TokenBucket storage s_bucket, Config memory config) internal {
    // First update the bucket to make sure the proper rate is used for all the time
    // up until the config change.
    uint256 timeDiff = block.timestamp - s_bucket.lastUpdated;
    if (timeDiff != 0) {
      s_bucket.tokens = uint128(_calculateRefill(s_bucket.capacity, s_bucket.tokens, timeDiff, s_bucket.rate));

      s_bucket.lastUpdated = uint32(block.timestamp);
    }

    s_bucket.tokens = uint128(_min(config.capacity, s_bucket.tokens));
    s_bucket.isEnabled = config.isEnabled;
    s_bucket.capacity = config.capacity;
    s_bucket.rate = config.rate;

    emit ConfigChanged(config);
  }

  /// @notice Validates the token bucket config
  function _validateTokenBucketConfig(Config memory config, bool mustBeDisabled) internal pure {
    if (config.isEnabled) {
      if (config.rate >= config.capacity || config.rate == 0) {
        revert InvalidRateLimitRate(config);
      }
      if (mustBeDisabled) {
        revert RateLimitMustBeDisabled();
      }
    } else {
      if (config.rate != 0 || config.capacity != 0) {
        revert DisabledNonZeroRateLimit(config);
      }
    }
  }

  /// @notice Calculate refilled tokens
  /// @param capacity bucket capacity
  /// @param tokens current bucket tokens
  /// @param timeDiff block time difference since last refill
  /// @param rate bucket refill rate
  /// @return the value of tokens after refill
  function _calculateRefill(
    uint256 capacity,
    uint256 tokens,
    uint256 timeDiff,
    uint256 rate
  ) private pure returns (uint256) {
    return _min(capacity, tokens + timeDiff * rate);
  }

  /// @notice Return the smallest of two integers
  /// @param a first int
  /// @param b second int
  /// @return smallest
  function _min(uint256 a, uint256 b) internal pure returns (uint256) {
    return a < b ? a : b;
  }
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.24;

import {IPoolV1} from "../interfaces/IPool.sol";
import {IRMN} from "../interfaces/IRMN.sol";
import {IRouter} from "../interfaces/IRouter.sol";

import {OwnerIsCreator} from "../../shared/access/OwnerIsCreator.sol";
import {Pool} from "../libraries/Pool.sol";
import {RateLimiter} from "../libraries/RateLimiter.sol";

import {IERC20} from "../../vendor/openzeppelin-solidity/v4.8.3/contracts/token/ERC20/IERC20.sol";
import {IERC165} from "../../vendor/openzeppelin-solidity/v5.0.2/contracts/utils/introspection/IERC165.sol";
import {EnumerableSet} from "../../vendor/openzeppelin-solidity/v5.0.2/contracts/utils/structs/EnumerableSet.sol";

/// @notice Base abstract class with common functions for all token pools.
/// A token pool serves as isolated place for holding tokens and token specific logic
/// that may execute as tokens move across the bridge.
abstract contract TokenPool is IPoolV1, OwnerIsCreator {
  using EnumerableSet for EnumerableSet.AddressSet;
  using EnumerableSet for EnumerableSet.UintSet;
  using RateLimiter for RateLimiter.TokenBucket;

  error CallerIsNotARampOnRouter(address caller);
  error ZeroAddressNotAllowed();
  error SenderNotAllowed(address sender);
  error AllowListNotEnabled();
  error NonExistentChain(uint64 remoteChainSelector);
  error ChainNotAllowed(uint64 remoteChainSelector);
  error CursedByRMN();
  error ChainAlreadyExists(uint64 chainSelector);
  error InvalidSourcePoolAddress(bytes sourcePoolAddress);
  error InvalidToken(address token);
  error Unauthorized(address caller);

  event Locked(address indexed sender, uint256 amount);
  event Burned(address indexed sender, uint256 amount);
  event Released(address indexed sender, address indexed recipient, uint256 amount);
  event Minted(address indexed sender, address indexed recipient, uint256 amount);
  event ChainAdded(
    uint64 remoteChainSelector,
    bytes remoteToken,
    RateLimiter.Config outboundRateLimiterConfig,
    RateLimiter.Config inboundRateLimiterConfig
  );
  event ChainConfigured(
    uint64 remoteChainSelector,
    RateLimiter.Config outboundRateLimiterConfig,
    RateLimiter.Config inboundRateLimiterConfig
  );
  event ChainRemoved(uint64 remoteChainSelector);
  event RemotePoolSet(uint64 indexed remoteChainSelector, bytes previousPoolAddress, bytes remotePoolAddress);
  event AllowListAdd(address sender);
  event AllowListRemove(address sender);
  event RouterUpdated(address oldRouter, address newRouter);

  struct ChainUpdate {
    uint64 remoteChainSelector; // ──╮ Remote chain selector
    bool allowed; // ────────────────╯ Whether the chain should be enabled
    bytes remotePoolAddress; //        Address of the remote pool, ABI encoded in the case of a remote EVM chain.
    bytes remoteTokenAddress; //       Address of the remote token, ABI encoded in the case of a remote EVM chain.
    RateLimiter.Config outboundRateLimiterConfig; // Outbound rate limited config, meaning the rate limits for all of the onRamps for the given chain
    RateLimiter.Config inboundRateLimiterConfig; // Inbound rate limited config, meaning the rate limits for all of the offRamps for the given chain
  }

  struct RemoteChainConfig {
    RateLimiter.TokenBucket outboundRateLimiterConfig; // Outbound rate limited config, meaning the rate limits for all of the onRamps for the given chain
    RateLimiter.TokenBucket inboundRateLimiterConfig; // Inbound rate limited config, meaning the rate limits for all of the offRamps for the given chain
    bytes remotePoolAddress; // Address of the remote pool, ABI encoded in the case of a remote EVM chain.
    bytes remoteTokenAddress; // Address of the remote token, ABI encoded in the case of a remote EVM chain.
  }

  /// @dev The bridgeable token that is managed by this pool.
  IERC20 internal immutable i_token;
  /// @dev The address of the RMN proxy
  address internal immutable i_rmnProxy;
  /// @dev The immutable flag that indicates if the pool is access-controlled.
  bool internal immutable i_allowlistEnabled;
  /// @dev A set of addresses allowed to trigger lockOrBurn as original senders.
  /// Only takes effect if i_allowlistEnabled is true.
  /// This can be used to ensure only token-issuer specified addresses can
  /// move tokens.
  EnumerableSet.AddressSet internal s_allowList;
  /// @dev The address of the router
  IRouter internal s_router;
  /// @dev A set of allowed chain selectors. We want the allowlist to be enumerable to
  /// be able to quickly determine (without parsing logs) who can access the pool.
  /// @dev The chain selectors are in uint256 format because of the EnumerableSet implementation.
  EnumerableSet.UintSet internal s_remoteChainSelectors;
  mapping(uint64 remoteChainSelector => RemoteChainConfig) internal s_remoteChainConfigs;
  /// @notice The address of the rate limiter admin.
  /// @dev Can be address(0) if none is configured.
  address internal s_rateLimitAdmin;

  constructor(IERC20 token, address[] memory allowlist, address rmnProxy, address router) {
    if (address(token) == address(0) || router == address(0) || rmnProxy == address(0)) revert ZeroAddressNotAllowed();
    i_token = token;
    i_rmnProxy = rmnProxy;
    s_router = IRouter(router);

    // Pool can be set as permissioned or permissionless at deployment time only to save hot-path gas.
    i_allowlistEnabled = allowlist.length > 0;
    if (i_allowlistEnabled) {
      _applyAllowListUpdates(new address[](0), allowlist);
    }
  }

  /// @notice Get RMN proxy address
  /// @return rmnProxy Address of RMN proxy
  function getRmnProxy() public view returns (address rmnProxy) {
    return i_rmnProxy;
  }

  /// @inheritdoc IPoolV1
  function isSupportedToken(address token) public view virtual returns (bool) {
    return token == address(i_token);
  }

  /// @notice Gets the IERC20 token that this pool can lock or burn.
  /// @return token The IERC20 token representation.
  function getToken() public view returns (IERC20 token) {
    return i_token;
  }

  /// @notice Gets the pool's Router
  /// @return router The pool's Router
  function getRouter() public view returns (address router) {
    return address(s_router);
  }

  /// @notice Sets the pool's Router
  /// @param newRouter The new Router
  function setRouter(address newRouter) public onlyOwner {
    if (newRouter == address(0)) revert ZeroAddressNotAllowed();
    address oldRouter = address(s_router);
    s_router = IRouter(newRouter);

    emit RouterUpdated(oldRouter, newRouter);
  }

  /// @notice Signals which version of the pool interface is supported
  function supportsInterface(bytes4 interfaceId) public pure virtual override returns (bool) {
    return interfaceId == Pool.CCIP_POOL_V1 || interfaceId == type(IPoolV1).interfaceId
      || interfaceId == type(IERC165).interfaceId;
  }

  // ================================================================
  // │                         Validation                           │
  // ================================================================

  /// @notice Validates the lock or burn input for correctness on
  /// - token to be locked or burned
  /// - RMN curse status
  /// - allowlist status
  /// - if the sender is a valid onRamp
  /// - rate limit status
  /// @param lockOrBurnIn The input to validate.
  /// @dev This function should always be called before executing a lock or burn. Not doing so would allow
  /// for various exploits.
  function _validateLockOrBurn(Pool.LockOrBurnInV1 memory lockOrBurnIn) internal {
    if (!isSupportedToken(lockOrBurnIn.localToken)) revert InvalidToken(lockOrBurnIn.localToken);
    if (IRMN(i_rmnProxy).isCursed(bytes16(uint128(lockOrBurnIn.remoteChainSelector)))) revert CursedByRMN();
    _checkAllowList(lockOrBurnIn.originalSender);

    _onlyOnRamp(lockOrBurnIn.remoteChainSelector);
    _consumeOutboundRateLimit(lockOrBurnIn.remoteChainSelector, lockOrBurnIn.amount);
  }

  /// @notice Validates the release or mint input for correctness on
  /// - token to be released or minted
  /// - RMN curse status
  /// - if the sender is a valid offRamp
  /// - if the source pool is valid
  /// - rate limit status
  /// @param releaseOrMintIn The input to validate.
  /// @dev This function should always be called before executing a release or mint. Not doing so would allow
  /// for various exploits.
  function _validateReleaseOrMint(Pool.ReleaseOrMintInV1 memory releaseOrMintIn) internal {
    if (!isSupportedToken(releaseOrMintIn.localToken)) revert InvalidToken(releaseOrMintIn.localToken);
    if (IRMN(i_rmnProxy).isCursed(bytes16(uint128(releaseOrMintIn.remoteChainSelector)))) revert CursedByRMN();
    _onlyOffRamp(releaseOrMintIn.remoteChainSelector);

    // Validates that the source pool address is configured on this pool.
    bytes memory configuredRemotePool = getRemotePool(releaseOrMintIn.remoteChainSelector);
    if (
      configuredRemotePool.length == 0
        || keccak256(releaseOrMintIn.sourcePoolAddress) != keccak256(configuredRemotePool)
    ) {
      revert InvalidSourcePoolAddress(releaseOrMintIn.sourcePoolAddress);
    }
    _consumeInboundRateLimit(releaseOrMintIn.remoteChainSelector, releaseOrMintIn.amount);
  }

  // ================================================================
  // │                     Chain permissions                        │
  // ================================================================

  /// @notice Gets the pool address on the remote chain.
  /// @param remoteChainSelector Remote chain selector.
  /// @dev To support non-evm chains, this value is encoded into bytes
  function getRemotePool(uint64 remoteChainSelector) public view returns (bytes memory) {
    return s_remoteChainConfigs[remoteChainSelector].remotePoolAddress;
  }

  /// @notice Gets the token address on the remote chain.
  /// @param remoteChainSelector Remote chain selector.
  /// @dev To support non-evm chains, this value is encoded into bytes
  function getRemoteToken(uint64 remoteChainSelector) public view returns (bytes memory) {
    return s_remoteChainConfigs[remoteChainSelector].remoteTokenAddress;
  }

  /// @notice Sets the remote pool address for a given chain selector.
  /// @param remoteChainSelector The remote chain selector for which the remote pool address is being set.
  /// @param remotePoolAddress The address of the remote pool.
  function setRemotePool(uint64 remoteChainSelector, bytes calldata remotePoolAddress) external onlyOwner {
    if (!isSupportedChain(remoteChainSelector)) revert NonExistentChain(remoteChainSelector);

    bytes memory prevAddress = s_remoteChainConfigs[remoteChainSelector].remotePoolAddress;
    s_remoteChainConfigs[remoteChainSelector].remotePoolAddress = remotePoolAddress;

    emit RemotePoolSet(remoteChainSelector, prevAddress, remotePoolAddress);
  }

  /// @inheritdoc IPoolV1
  function isSupportedChain(uint64 remoteChainSelector) public view returns (bool) {
    return s_remoteChainSelectors.contains(remoteChainSelector);
  }

  /// @notice Get list of allowed chains
  /// @return list of chains.
  function getSupportedChains() public view returns (uint64[] memory) {
    uint256[] memory uint256ChainSelectors = s_remoteChainSelectors.values();
    uint64[] memory chainSelectors = new uint64[](uint256ChainSelectors.length);
    for (uint256 i = 0; i < uint256ChainSelectors.length; ++i) {
      chainSelectors[i] = uint64(uint256ChainSelectors[i]);
    }

    return chainSelectors;
  }

  /// @notice Sets the permissions for a list of chains selectors. Actual senders for these chains
  /// need to be allowed on the Router to interact with this pool.
  /// @dev Only callable by the owner
  /// @param chains A list of chains and their new permission status & rate limits. Rate limits
  /// are only used when the chain is being added through `allowed` being true.
  function applyChainUpdates(ChainUpdate[] calldata chains) external virtual onlyOwner {
    for (uint256 i = 0; i < chains.length; ++i) {
      ChainUpdate memory update = chains[i];
      RateLimiter._validateTokenBucketConfig(update.outboundRateLimiterConfig, !update.allowed);
      RateLimiter._validateTokenBucketConfig(update.inboundRateLimiterConfig, !update.allowed);

      if (update.allowed) {
        // If the chain already exists, revert
        if (!s_remoteChainSelectors.add(update.remoteChainSelector)) {
          revert ChainAlreadyExists(update.remoteChainSelector);
        }

        if (update.remotePoolAddress.length == 0 || update.remoteTokenAddress.length == 0) {
          revert ZeroAddressNotAllowed();
        }

        s_remoteChainConfigs[update.remoteChainSelector] = RemoteChainConfig({
          outboundRateLimiterConfig: RateLimiter.TokenBucket({
            rate: update.outboundRateLimiterConfig.rate,
            capacity: update.outboundRateLimiterConfig.capacity,
            tokens: update.outboundRateLimiterConfig.capacity,
            lastUpdated: uint32(block.timestamp),
            isEnabled: update.outboundRateLimiterConfig.isEnabled
          }),
          inboundRateLimiterConfig: RateLimiter.TokenBucket({
            rate: update.inboundRateLimiterConfig.rate,
            capacity: update.inboundRateLimiterConfig.capacity,
            tokens: update.inboundRateLimiterConfig.capacity,
            lastUpdated: uint32(block.timestamp),
            isEnabled: update.inboundRateLimiterConfig.isEnabled
          }),
          remotePoolAddress: update.remotePoolAddress,
          remoteTokenAddress: update.remoteTokenAddress
        });

        emit ChainAdded(
          update.remoteChainSelector,
          update.remoteTokenAddress,
          update.outboundRateLimiterConfig,
          update.inboundRateLimiterConfig
        );
      } else {
        // If the chain doesn't exist, revert
        if (!s_remoteChainSelectors.remove(update.remoteChainSelector)) {
          revert NonExistentChain(update.remoteChainSelector);
        }

        delete s_remoteChainConfigs[update.remoteChainSelector];

        emit ChainRemoved(update.remoteChainSelector);
      }
    }
  }

  // ================================================================
  // │                        Rate limiting                         │
  // ================================================================

  /// @notice Sets the rate limiter admin address.
  /// @dev Only callable by the owner.
  /// @param rateLimitAdmin The new rate limiter admin address.
  function setRateLimitAdmin(address rateLimitAdmin) external onlyOwner {
    s_rateLimitAdmin = rateLimitAdmin;
  }

  /// @notice Gets the rate limiter admin address.
  function getRateLimitAdmin() external view returns (address) {
    return s_rateLimitAdmin;
  }

  /// @notice Consumes outbound rate limiting capacity in this pool
  function _consumeOutboundRateLimit(uint64 remoteChainSelector, uint256 amount) internal {
    s_remoteChainConfigs[remoteChainSelector].outboundRateLimiterConfig._consume(amount, address(i_token));
  }

  /// @notice Consumes inbound rate limiting capacity in this pool
  function _consumeInboundRateLimit(uint64 remoteChainSelector, uint256 amount) internal {
    s_remoteChainConfigs[remoteChainSelector].inboundRateLimiterConfig._consume(amount, address(i_token));
  }

  /// @notice Gets the token bucket with its values for the block it was requested at.
  /// @return The token bucket.
  function getCurrentOutboundRateLimiterState(
    uint64 remoteChainSelector
  ) external view returns (RateLimiter.TokenBucket memory) {
    return s_remoteChainConfigs[remoteChainSelector].outboundRateLimiterConfig._currentTokenBucketState();
  }

  /// @notice Gets the token bucket with its values for the block it was requested at.
  /// @return The token bucket.
  function getCurrentInboundRateLimiterState(
    uint64 remoteChainSelector
  ) external view returns (RateLimiter.TokenBucket memory) {
    return s_remoteChainConfigs[remoteChainSelector].inboundRateLimiterConfig._currentTokenBucketState();
  }

  /// @notice Sets the chain rate limiter config.
  /// @param remoteChainSelector The remote chain selector for which the rate limits apply.
  /// @param outboundConfig The new outbound rate limiter config, meaning the onRamp rate limits for the given chain.
  /// @param inboundConfig The new inbound rate limiter config, meaning the offRamp rate limits for the given chain.
  function setChainRateLimiterConfig(
    uint64 remoteChainSelector,
    RateLimiter.Config memory outboundConfig,
    RateLimiter.Config memory inboundConfig
  ) external {
    if (msg.sender != s_rateLimitAdmin && msg.sender != owner()) revert Unauthorized(msg.sender);

    _setRateLimitConfig(remoteChainSelector, outboundConfig, inboundConfig);
  }

  function _setRateLimitConfig(
    uint64 remoteChainSelector,
    RateLimiter.Config memory outboundConfig,
    RateLimiter.Config memory inboundConfig
  ) internal {
    if (!isSupportedChain(remoteChainSelector)) revert NonExistentChain(remoteChainSelector);
    RateLimiter._validateTokenBucketConfig(outboundConfig, false);
    s_remoteChainConfigs[remoteChainSelector].outboundRateLimiterConfig._setTokenBucketConfig(outboundConfig);
    RateLimiter._validateTokenBucketConfig(inboundConfig, false);
    s_remoteChainConfigs[remoteChainSelector].inboundRateLimiterConfig._setTokenBucketConfig(inboundConfig);
    emit ChainConfigured(remoteChainSelector, outboundConfig, inboundConfig);
  }

  // ================================================================
  // │                           Access                             │
  // ================================================================

  /// @notice Checks whether remote chain selector is configured on this contract, and if the msg.sender
  /// is a permissioned onRamp for the given chain on the Router.
  function _onlyOnRamp(uint64 remoteChainSelector) internal view {
    if (!isSupportedChain(remoteChainSelector)) revert ChainNotAllowed(remoteChainSelector);
    if (!(msg.sender == s_router.getOnRamp(remoteChainSelector))) revert CallerIsNotARampOnRouter(msg.sender);
  }

  /// @notice Checks whether remote chain selector is configured on this contract, and if the msg.sender
  /// is a permissioned offRamp for the given chain on the Router.
  function _onlyOffRamp(uint64 remoteChainSelector) internal view {
    if (!isSupportedChain(remoteChainSelector)) revert ChainNotAllowed(remoteChainSelector);
    if (!s_router.isOffRamp(remoteChainSelector, msg.sender)) revert CallerIsNotARampOnRouter(msg.sender);
  }

  // ================================================================
  // │                          Allowlist                           │
  // ================================================================

  function _checkAllowList(address sender) internal view {
    if (i_allowlistEnabled) {
      if (!s_allowList.contains(sender)) {
        revert SenderNotAllowed(sender);
      }
    }
  }

  /// @notice Gets whether the allowList functionality is enabled.
  /// @return true is enabled, false if not.
  function getAllowListEnabled() external view returns (bool) {
    return i_allowlistEnabled;
  }

  /// @notice Gets the allowed addresses.
  /// @return The allowed addresses.
  function getAllowList() external view returns (address[] memory) {
    return s_allowList.values();
  }

  /// @notice Apply updates to the allow list.
  /// @param removes The addresses to be removed.
  /// @param adds The addresses to be added.
  function applyAllowListUpdates(address[] calldata removes, address[] calldata adds) external onlyOwner {
    _applyAllowListUpdates(removes, adds);
  }

  /// @notice Internal version of applyAllowListUpdates to allow for reuse in the constructor.
  function _applyAllowListUpdates(address[] memory removes, address[] memory adds) internal {
    if (!i_allowlistEnabled) revert AllowListNotEnabled();

    for (uint256 i = 0; i < removes.length; ++i) {
      address toRemove = removes[i];
      if (s_allowList.remove(toRemove)) {
        emit AllowListRemove(toRemove);
      }
    }
    for (uint256 i = 0; i < adds.length; ++i) {
      address toAdd = adds[i];
      if (toAdd == address(0)) {
        continue;
      }
      if (s_allowList.add(toAdd)) {
        emit AllowListAdd(toAdd);
      }
    }
  }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {ConfirmedOwnerWithProposal} from "./ConfirmedOwnerWithProposal.sol";

/// @title The ConfirmedOwner contract
/// @notice A contract with helpers for basic contract ownership.
contract ConfirmedOwner is ConfirmedOwnerWithProposal {
  constructor(address newOwner) ConfirmedOwnerWithProposal(newOwner, address(0)) {}
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {IOwnable} from "../interfaces/IOwnable.sol";

/// @title The ConfirmedOwner contract
/// @notice A contract with helpers for basic contract ownership.
contract ConfirmedOwnerWithProposal is IOwnable {
  address private s_owner;
  address private s_pendingOwner;

  event OwnershipTransferRequested(address indexed from, address indexed to);
  event OwnershipTransferred(address indexed from, address indexed to);

  constructor(address newOwner, address pendingOwner) {
    // solhint-disable-next-line gas-custom-errors
    require(newOwner != address(0), "Cannot set owner to zero");

    s_owner = newOwner;
    if (pendingOwner != address(0)) {
      _transferOwnership(pendingOwner);
    }
  }

  /// @notice Allows an owner to begin transferring ownership to a new address.
  function transferOwnership(address to) public override onlyOwner {
    _transferOwnership(to);
  }

  /// @notice Allows an ownership transfer to be completed by the recipient.
  function acceptOwnership() external override {
    // solhint-disable-next-line gas-custom-errors
    require(msg.sender == s_pendingOwner, "Must be proposed owner");

    address oldOwner = s_owner;
    s_owner = msg.sender;
    s_pendingOwner = address(0);

    emit OwnershipTransferred(oldOwner, msg.sender);
  }

  /// @notice Get the current owner
  function owner() public view override returns (address) {
    return s_owner;
  }

  /// @notice validate, transfer ownership, and emit relevant events
  function _transferOwnership(address to) private {
    // solhint-disable-next-line gas-custom-errors
    require(to != msg.sender, "Cannot transfer to self");

    s_pendingOwner = to;

    emit OwnershipTransferRequested(s_owner, to);
  }

  /// @notice validate access
  function _validateOwnership() internal view {
    // solhint-disable-next-line gas-custom-errors
    require(msg.sender == s_owner, "Only callable by owner");
  }

  /// @notice Reverts if called by anyone other than the contract owner.
  modifier onlyOwner() {
    _validateOwnership();
    _;
  }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {ConfirmedOwner} from "./ConfirmedOwner.sol";

/// @title The OwnerIsCreator contract
/// @notice A contract with helpers for basic contract ownership.
contract OwnerIsCreator is ConfirmedOwner {
  constructor() ConfirmedOwner(msg.sender) {}
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

interface IOwnable {
  function owner() external returns (address);

  function transferOwnership(address recipient) external;

  function acceptOwnership() external;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
  /**
   * @dev Emitted when `value` tokens are moved from one account (`from`) to
   * another (`to`).
   *
   * Note that `value` may be zero.
   */
  event Transfer(address indexed from, address indexed to, uint256 value);

  /**
   * @dev Emitted when the allowance of a `spender` for an `owner` is set by
   * a call to {approve}. `value` is the new allowance.
   */
  event Approval(address indexed owner, address indexed spender, uint256 value);

  /**
   * @dev Returns the amount of tokens in existence.
   */
  function totalSupply() external view returns (uint256);

  /**
   * @dev Returns the amount of tokens owned by `account`.
   */
  function balanceOf(address account) external view returns (uint256);

  /**
   * @dev Moves `amount` tokens from the caller's account to `to`.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * Emits a {Transfer} event.
   */
  function transfer(address to, uint256 amount) external returns (bool);

  /**
   * @dev Returns the remaining number of tokens that `spender` will be
   * allowed to spend on behalf of `owner` through {transferFrom}. This is
   * zero by default.
   *
   * This value changes when {approve} or {transferFrom} are called.
   */
  function allowance(address owner, address spender) external view returns (uint256);

  /**
   * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * IMPORTANT: Beware that changing an allowance with this method brings the risk
   * that someone may use both the old and the new allowance by unfortunate
   * transaction ordering. One possible solution to mitigate this race
   * condition is to first reduce the spender's allowance to 0 and set the
   * desired value afterwards:
   * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
   *
   * Emits an {Approval} event.
   */
  function approve(address spender, uint256 amount) external returns (bool);

  /**
   * @dev Moves `amount` tokens from `from` to `to` using the
   * allowance mechanism. `amount` is then deducted from the caller's
   * allowance.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * Emits a {Transfer} event.
   */
  function transferFrom(address from, address to, uint256 amount) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/IERC165.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/structs/EnumerableSet.sol)
// This file was procedurally generated from scripts/generate/templates/EnumerableSet.js.

pragma solidity ^0.8.20;

/**
 * @dev Library for managing
 * https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
 * types.
 *
 * Sets have the following properties:
 *
 * - Elements are added, removed, and checked for existence in constant time
 * (O(1)).
 * - Elements are enumerated in O(n). No guarantees are made on the ordering.
 *
 * ```solidity
 * contract Example {
 *     // Add the library methods
 *     using EnumerableSet for EnumerableSet.AddressSet;
 *
 *     // Declare a set state variable
 *     EnumerableSet.AddressSet private mySet;
 * }
 * ```
 *
 * As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
 * and `uint256` (`UintSet`) are supported.
 *
 * [WARNING]
 * ====
 * Trying to delete such a structure from storage will likely result in data corruption, rendering the structure
 * unusable.
 * See https://github.com/ethereum/solidity/pull/11843[ethereum/solidity#11843] for more info.
 *
 * In order to clean an EnumerableSet, you can either remove all elements one by one or create a fresh instance using an
 * array of EnumerableSet.
 * ====
 */
library EnumerableSet {
    // To implement this library for multiple types with as little code
    // repetition as possible, we write it in terms of a generic Set type with
    // bytes32 values.
    // The Set implementation uses private functions, and user-facing
    // implementations (such as AddressSet) are just wrappers around the
    // underlying Set.
    // This means that we can only create new EnumerableSets for types that fit
    // in bytes32.

    struct Set {
        // Storage of set values
        bytes32[] _values;
        // Position is the index of the value in the `values` array plus 1.
        // Position 0 is used to mean a value is not in the set.
        mapping(bytes32 value => uint256) _positions;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function _add(Set storage set, bytes32 value) private returns (bool) {
        if (!_contains(set, value)) {
            set._values.push(value);
            // The value is stored at length-1, but we add 1 to all indexes
            // and use 0 as a sentinel value
            set._positions[value] = set._values.length;
            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function _remove(Set storage set, bytes32 value) private returns (bool) {
        // We cache the value's position to prevent multiple reads from the same storage slot
        uint256 position = set._positions[value];

        if (position != 0) {
            // Equivalent to contains(set, value)
            // To delete an element from the _values array in O(1), we swap the element to delete with the last one in
            // the array, and then remove the last element (sometimes called as 'swap and pop').
            // This modifies the order of the array, as noted in {at}.

            uint256 valueIndex = position - 1;
            uint256 lastIndex = set._values.length - 1;

            if (valueIndex != lastIndex) {
                bytes32 lastValue = set._values[lastIndex];

                // Move the lastValue to the index where the value to delete is
                set._values[valueIndex] = lastValue;
                // Update the tracked position of the lastValue (that was just moved)
                set._positions[lastValue] = position;
            }

            // Delete the slot where the moved value was stored
            set._values.pop();

            // Delete the tracked position for the deleted slot
            delete set._positions[value];

            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function _contains(Set storage set, bytes32 value) private view returns (bool) {
        return set._positions[value] != 0;
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function _length(Set storage set) private view returns (uint256) {
        return set._values.length;
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function _at(Set storage set, uint256 index) private view returns (bytes32) {
        return set._values[index];
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function _values(Set storage set) private view returns (bytes32[] memory) {
        return set._values;
    }

    // Bytes32Set

    struct Bytes32Set {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _add(set._inner, value);
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _remove(set._inner, value);
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
        return _contains(set._inner, value);
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(Bytes32Set storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
        return _at(set._inner, index);
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(Bytes32Set storage set) internal view returns (bytes32[] memory) {
        bytes32[] memory store = _values(set._inner);
        bytes32[] memory result;

        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }

        return result;
    }

    // AddressSet

    struct AddressSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(AddressSet storage set, address value) internal returns (bool) {
        return _add(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(AddressSet storage set, address value) internal returns (bool) {
        return _remove(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(AddressSet storage set, address value) internal view returns (bool) {
        return _contains(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(AddressSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(AddressSet storage set, uint256 index) internal view returns (address) {
        return address(uint160(uint256(_at(set._inner, index))));
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(AddressSet storage set) internal view returns (address[] memory) {
        bytes32[] memory store = _values(set._inner);
        address[] memory result;

        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }

        return result;
    }

    // UintSet

    struct UintSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(UintSet storage set, uint256 value) internal returns (bool) {
        return _add(set._inner, bytes32(value));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(UintSet storage set, uint256 value) internal returns (bool) {
        return _remove(set._inner, bytes32(value));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(UintSet storage set, uint256 value) internal view returns (bool) {
        return _contains(set._inner, bytes32(value));
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(UintSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(UintSet storage set, uint256 index) internal view returns (uint256) {
        return uint256(_at(set._inner, index));
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(UintSet storage set) internal view returns (uint256[] memory) {
        bytes32[] memory store = _values(set._inner);
        uint256[] memory result;

        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }

        return result;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol)

pragma solidity ^0.8.20;

import {Context} from "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * The initial owner is set to the address provided by the deployer. This can
 * later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    /**
     * @dev The caller account is not authorized to perform an operation.
     */
    error OwnableUnauthorizedAccount(address account);

    /**
     * @dev The owner is not a valid owner account. (eg. `address(0)`)
     */
    error OwnableInvalidOwner(address owner);

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the address provided by the deployer as the initial owner.
     */
    constructor(address initialOwner) {
        if (initialOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(initialOwner);
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        if (owner() != _msgSender()) {
            revert OwnableUnauthorizedAccount(_msgSender());
        }
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby disabling any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        if (newOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Permit.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 *
 * ==== Security Considerations
 *
 * There are two important considerations concerning the use of `permit`. The first is that a valid permit signature
 * expresses an allowance, and it should not be assumed to convey additional meaning. In particular, it should not be
 * considered as an intention to spend the allowance in any specific way. The second is that because permits have
 * built-in replay protection and can be submitted by anyone, they can be frontrun. A protocol that uses permits should
 * take this into consideration and allow a `permit` call to fail. Combining these two aspects, a pattern that may be
 * generally recommended is:
 *
 * ```solidity
 * function doThingWithPermit(..., uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) public {
 *     try token.permit(msg.sender, address(this), value, deadline, v, r, s) {} catch {}
 *     doThing(..., value);
 * }
 *
 * function doThing(..., uint256 value) public {
 *     token.safeTransferFrom(msg.sender, address(this), value);
 *     ...
 * }
 * ```
 *
 * Observe that: 1) `msg.sender` is used as the owner, leaving no ambiguity as to the signer intent, and 2) the use of
 * `try/catch` allows the permit to fail and makes the code tolerant to frontrunning. (See also
 * {SafeERC20-safeTransferFrom}).
 *
 * Additionally, note that smart contract wallets (such as Argent or Safe) are not able to produce permit signatures, so
 * contracts should have entry points that don't rely on permit.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     *
     * CAUTION: See Security Considerations above.
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the value of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the value of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 value) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 value) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the
     * allowance mechanism. `value` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 value) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.20;

import {IERC20} from "../IERC20.sol";
import {IERC20Permit} from "../extensions/IERC20Permit.sol";
import {Address} from "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    /**
     * @dev An operation with an ERC20 token failed.
     */
    error SafeERC20FailedOperation(address token);

    /**
     * @dev Indicates a failed `decreaseAllowance` request.
     */
    error SafeERC20FailedDecreaseAllowance(address spender, uint256 currentAllowance, uint256 requestedDecrease);

    /**
     * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeCall(token.transfer, (to, value)));
    }

    /**
     * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
     * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
     */
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeCall(token.transferFrom, (from, to, value)));
    }

    /**
     * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 oldAllowance = token.allowance(address(this), spender);
        forceApprove(token, spender, oldAllowance + value);
    }

    /**
     * @dev Decrease the calling contract's allowance toward `spender` by `requestedDecrease`. If `token` returns no
     * value, non-reverting calls are assumed to be successful.
     */
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 requestedDecrease) internal {
        unchecked {
            uint256 currentAllowance = token.allowance(address(this), spender);
            if (currentAllowance < requestedDecrease) {
                revert SafeERC20FailedDecreaseAllowance(spender, currentAllowance, requestedDecrease);
            }
            forceApprove(token, spender, currentAllowance - requestedDecrease);
        }
    }

    /**
     * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval
     * to be set to zero before setting it to a non-zero value, such as USDT.
     */
    function forceApprove(IERC20 token, address spender, uint256 value) internal {
        bytes memory approvalCall = abi.encodeCall(token.approve, (spender, value));

        if (!_callOptionalReturnBool(token, approvalCall)) {
            _callOptionalReturn(token, abi.encodeCall(token.approve, (spender, 0)));
            _callOptionalReturn(token, approvalCall);
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data);
        if (returndata.length != 0 && !abi.decode(returndata, (bool))) {
            revert SafeERC20FailedOperation(address(token));
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     *
     * This is a variant of {_callOptionalReturn} that silents catches all reverts and returns a bool instead.
     */
    function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We cannot use {Address-functionCall} here since this should return false
        // and not revert is the subcall reverts.

        (bool success, bytes memory returndata) = address(token).call(data);
        return success && (returndata.length == 0 || abi.decode(returndata, (bool))) && address(token).code.length > 0;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Address.sol)

pragma solidity ^0.8.20;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev The ETH balance of the account is not enough to perform the operation.
     */
    error AddressInsufficientBalance(address account);

    /**
     * @dev There's no code at `target` (it is not a contract).
     */
    error AddressEmptyCode(address target);

    /**
     * @dev A call to an address target failed. The target may have reverted.
     */
    error FailedInnerCall();

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.20/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        if (address(this).balance < amount) {
            revert AddressInsufficientBalance(address(this));
        }

        (bool success, ) = recipient.call{value: amount}("");
        if (!success) {
            revert FailedInnerCall();
        }
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason or custom error, it is bubbled
     * up by this function (like regular Solidity function calls). However, if
     * the call reverted with no returned reason, this function reverts with a
     * {FailedInnerCall} error.
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        if (address(this).balance < value) {
            revert AddressInsufficientBalance(address(this));
        }
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and reverts if the target
     * was not a contract or bubbling up the revert reason (falling back to {FailedInnerCall}) in case of an
     * unsuccessful call.
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata
    ) internal view returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            // only check if target is a contract if the call was successful and the return data is empty
            // otherwise we already know that it was a contract
            if (returndata.length == 0 && target.code.length == 0) {
                revert AddressEmptyCode(target);
            }
            return returndata;
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and reverts if it wasn't, either by bubbling the
     * revert reason or with a default {FailedInnerCall} error.
     */
    function verifyCallResult(bool success, bytes memory returndata) internal pure returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            return returndata;
        }
    }

    /**
     * @dev Reverts with returndata if present. Otherwise reverts with {FailedInnerCall}.
     */
    function _revert(bytes memory returndata) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert FailedInnerCall();
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)

pragma solidity ^0.8.20;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    function _contextSuffixLength() internal view virtual returns (uint256) {
        return 0;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/cryptography/ECDSA.sol)

pragma solidity ^0.8.20;

/**
 * @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.
 *
 * These functions can be used to verify that a message was signed by the holder
 * of the private keys of a given address.
 */
library ECDSA {
    enum RecoverError {
        NoError,
        InvalidSignature,
        InvalidSignatureLength,
        InvalidSignatureS
    }

    /**
     * @dev The signature derives the `address(0)`.
     */
    error ECDSAInvalidSignature();

    /**
     * @dev The signature has an invalid length.
     */
    error ECDSAInvalidSignatureLength(uint256 length);

    /**
     * @dev The signature has an S value that is in the upper half order.
     */
    error ECDSAInvalidSignatureS(bytes32 s);

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with `signature` or an error. This will not
     * return address(0) without also returning an error description. Errors are documented using an enum (error type)
     * and a bytes32 providing additional information about the error.
     *
     * If no error is returned, then the address can be used for verification purposes.
     *
     * The `ecrecover` EVM precompile allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {MessageHashUtils-toEthSignedMessageHash} on it.
     *
     * Documentation for signature generation:
     * - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]
     * - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]
     */
    function tryRecover(bytes32 hash, bytes memory signature) internal pure returns (address, RecoverError, bytes32) {
        if (signature.length == 65) {
            bytes32 r;
            bytes32 s;
            uint8 v;
            // ecrecover takes the signature parameters, and the only way to get them
            // currently is to use assembly.
            /// @solidity memory-safe-assembly
            assembly {
                r := mload(add(signature, 0x20))
                s := mload(add(signature, 0x40))
                v := byte(0, mload(add(signature, 0x60)))
            }
            return tryRecover(hash, v, r, s);
        } else {
            return (address(0), RecoverError.InvalidSignatureLength, bytes32(signature.length));
        }
    }

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with
     * `signature`. This address can then be used for verification purposes.
     *
     * The `ecrecover` EVM precompile allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {MessageHashUtils-toEthSignedMessageHash} on it.
     */
    function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {
        (address recovered, RecoverError error, bytes32 errorArg) = tryRecover(hash, signature);
        _throwError(error, errorArg);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `r` and `vs` short-signature fields separately.
     *
     * See https://eips.ethereum.org/EIPS/eip-2098[EIP-2098 short signatures]
     */
    function tryRecover(bytes32 hash, bytes32 r, bytes32 vs) internal pure returns (address, RecoverError, bytes32) {
        unchecked {
            bytes32 s = vs & bytes32(0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff);
            // We do not check for an overflow here since the shift operation results in 0 or 1.
            uint8 v = uint8((uint256(vs) >> 255) + 27);
            return tryRecover(hash, v, r, s);
        }
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `r and `vs` short-signature fields separately.
     */
    function recover(bytes32 hash, bytes32 r, bytes32 vs) internal pure returns (address) {
        (address recovered, RecoverError error, bytes32 errorArg) = tryRecover(hash, r, vs);
        _throwError(error, errorArg);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `v`,
     * `r` and `s` signature fields separately.
     */
    function tryRecover(
        bytes32 hash,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal pure returns (address, RecoverError, bytes32) {
        // EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
        // unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
        // the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most
        // signatures from current libraries generate a unique signature with an s-value in the lower half order.
        //
        // If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
        // with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
        // vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
        // these malleable signatures as well.
        if (uint256(s) > 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) {
            return (address(0), RecoverError.InvalidSignatureS, s);
        }

        // If the signature is valid (and not malleable), return the signer address
        address signer = ecrecover(hash, v, r, s);
        if (signer == address(0)) {
            return (address(0), RecoverError.InvalidSignature, bytes32(0));
        }

        return (signer, RecoverError.NoError, bytes32(0));
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `v`,
     * `r` and `s` signature fields separately.
     */
    function recover(bytes32 hash, uint8 v, bytes32 r, bytes32 s) internal pure returns (address) {
        (address recovered, RecoverError error, bytes32 errorArg) = tryRecover(hash, v, r, s);
        _throwError(error, errorArg);
        return recovered;
    }

    /**
     * @dev Optionally reverts with the corresponding custom error according to the `error` argument provided.
     */
    function _throwError(RecoverError error, bytes32 errorArg) private pure {
        if (error == RecoverError.NoError) {
            return; // no error: do nothing
        } else if (error == RecoverError.InvalidSignature) {
            revert ECDSAInvalidSignature();
        } else if (error == RecoverError.InvalidSignatureLength) {
            revert ECDSAInvalidSignatureLength(uint256(errorArg));
        } else if (error == RecoverError.InvalidSignatureS) {
            revert ECDSAInvalidSignatureS(errorArg);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/ReentrancyGuard.sol)

pragma solidity ^0.8.20;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant NOT_ENTERED = 1;
    uint256 private constant ENTERED = 2;

    uint256 private _status;

    /**
     * @dev Unauthorized reentrant call.
     */
    error ReentrancyGuardReentrantCall();

    constructor() {
        _status = NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and making it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        _nonReentrantBefore();
        _;
        _nonReentrantAfter();
    }

    function _nonReentrantBefore() private {
        // On the first call to nonReentrant, _status will be NOT_ENTERED
        if (_status == ENTERED) {
            revert ReentrancyGuardReentrantCall();
        }

        // Any calls to nonReentrant after this point will fail
        _status = ENTERED;
    }

    function _nonReentrantAfter() private {
        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = NOT_ENTERED;
    }

    /**
     * @dev Returns true if the reentrancy guard is currently set to "entered", which indicates there is a
     * `nonReentrant` function in the call stack.
     */
    function _reentrancyGuardEntered() internal view returns (bool) {
        return _status == ENTERED;
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.24;

import {IAdapter} from "./IAdapter.sol";
import {Context} from "@openzeppelin/contracts/utils/Context.sol";
import {IBridge, ILBTC} from "../IBridge.sol";
/**
 * @title Abstract bridge adapter
 * @author Lombard.finance
 * @notice Implements basic communication with Bridge contract.
 * Should be extended with business logic of bridging protocols (e.g. CCIP, LayerZero).
 */
abstract contract AbstractAdapter is IAdapter, Context {
    error Adapter_ZeroAddress();
    error Adapter_AddressIsEOA();

    error NotBridge();

    event BridgeChanged(IBridge indexed oldBridge, IBridge indexed newBridge);

    IBridge public override bridge;

    constructor(IBridge bridge_) {
        _notZero(address(bridge_));
        bridge = bridge_;
    }

    function lbtc() public view returns (ILBTC) {
        return bridge.lbtc();
    }

    /// MODIFIERS ///

    modifier onlyBridge() {
        _onlyBridge();
        _;
    }

    /// ONLY OWNER FUNCTIONS ///

    /**
     * @notice Change the bridge address
     * @param bridge_ New bridge address
     */
    function changeBridge(IBridge bridge_) external {
        _onlyOwner();
        _notZero(address(bridge_));

        IBridge oldBridge = bridge;
        bridge = bridge_;
        emit BridgeChanged(oldBridge, bridge_);
    }

    /// PRIVATE FUNCTIONS ///

    function _onlyOwner() internal view virtual;

    function _onlyBridge() internal view {
        if (_msgSender() != address(bridge)) {
            revert NotBridge();
        }
    }

    function _notZero(address addr) internal pure {
        if (addr == address(0)) {
            revert Adapter_ZeroAddress();
        }
    }

    /**
     * @dev Called when data is received.
     */
    function _receive(bytes32 fromChain, bytes memory payload) internal {
        bridge.receivePayload(fromChain, payload);
    }

    /**
     * @notice Sends a payload from the source to destination chain.
     * @param _toChain Destination chain's.
     * @param _payload The payload to send.
     * @param _refundAddress Address where refund fee
     */
    function _deposit(
        bytes32 _toChain,
        bytes memory _payload,
        address _refundAddress
    ) internal virtual {}

    function deposit(
        address _fromAddress,
        bytes32 _toChain,
        bytes32 /* _toContract */,
        bytes32 /* _toAddress */,
        uint256 /* _amount */,
        bytes memory _payload
    ) external payable virtual override {
        _deposit(_toChain, _payload, _fromAddress);
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.24;

import {IERC20} from "@chainlink/contracts-ccip/src/v0.8/vendor/openzeppelin-solidity/v4.8.3/contracts/token/ERC20/IERC20.sol";
import {IRouterClient} from "@chainlink/contracts-ccip/src/v0.8/ccip/interfaces/IRouterClient.sol";
import {Client} from "@chainlink/contracts-ccip/src/v0.8/ccip/libraries/Client.sol";
import {AbstractAdapter} from "./AbstractAdapter.sol";
import {IBridge} from "../IBridge.sol";
import {Pool} from "@chainlink/contracts-ccip/src/v0.8/ccip/libraries/Pool.sol";
import {LombardTokenPool} from "./TokenPool.sol";
import {Ownable} from "@openzeppelin/contracts/access/Ownable.sol";
import {SafeERC20} from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import {IERC20 as OZIERC20} from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import {ReentrancyGuard} from "@openzeppelin/contracts/utils/ReentrancyGuard.sol";

/**
 * @title CCIP bridge adapter
 * @author Lombard.finance
 * @notice CLAdapter present an intermediary to enforce TokenPool compatibility
 */
contract CLAdapter is AbstractAdapter, Ownable, ReentrancyGuard {
    error CLZeroChain();
    error CLZeroChanSelector();
    error CLAttemptToOverrideChainSelector();
    error CLAttemptToOverrideChain();
    error CLRefundFailed(address, uint256);
    error CLUnauthorizedTokenPool(address);
    error ZeroPayload();
    error ReceiverTooBig();
    error AmountOverflow();
    error CLPayloadMismatch();
    error CLWrongPayloadHashLength();

    event CLChainSelectorSet(bytes32, uint64);
    event CLTokenPoolDeployed(address);

    mapping(bytes32 => uint64) public getRemoteChainSelector;
    mapping(uint64 => bytes32) public getChain;
    uint128 public getExecutionGasLimit;
    LombardTokenPool public tokenPool; // 1-to-1 with adapter

    // store last state
    uint256 internal _lastBurnedAmount;
    bytes internal _lastPayload;

    mapping(address => uint256) public refunds;

    modifier onlyTokenPool() {
        if (address(tokenPool) != _msgSender()) {
            revert CLUnauthorizedTokenPool(_msgSender());
        }
        _;
    }

    /// @notice msg.sender gets the ownership of the contract given
    /// token pool implementation
    constructor(
        IBridge bridge_,
        uint128 executionGasLimit_,
        //
        address ccipRouter_,
        address[] memory allowlist_,
        address rmnProxy_
    ) AbstractAdapter(bridge_) Ownable(_msgSender()) {
        _setExecutionGasLimit(executionGasLimit_);

        tokenPool = new LombardTokenPool(
            IERC20(address(bridge_.lbtc())),
            ccipRouter_,
            allowlist_,
            rmnProxy_,
            CLAdapter(this)
        );
        tokenPool.transferOwnership(_msgSender());
        emit CLTokenPoolDeployed(address(tokenPool));
    }

    /// USER ACTIONS ///

    function withdrawRefund() external nonReentrant {
        uint256 refundAm = refunds[_msgSender()];
        refunds[_msgSender()] = 0;
        (bool success, ) = payable(_msgSender()).call{value: refundAm}("");
        if (!success) {
            revert CLRefundFailed(_msgSender(), refundAm);
        }
    }

    /**
     * @notice Calculate the fee to be paid for CCIP message routing.
     * @dev Ignores _toContract and _payload, because they're not a part of CCIP message.
     * @param _toChain Chain id of destination chain.
     * @param _toAddress Recipient address.
     * @param _amount The amount of LBTC to bridge.
     * @return The fee in native currency for CCIP message routing.
     */
    function getFee(
        bytes32 _toChain,
        bytes32 /* _toContract, */,
        bytes32 _toAddress,
        uint256 _amount,
        bytes memory /* _payload */
    ) public view override returns (uint256) {
        return
            IRouterClient(tokenPool.getRouter()).getFee(
                getRemoteChainSelector[_toChain],
                _buildCCIPMessage(abi.encodePacked(_toAddress), _amount)
            );
    }

    function initiateDeposit(
        uint64 remoteChainSelector,
        bytes calldata receiver,
        uint256 amount
    )
        external
        onlyTokenPool
        returns (uint256 lastBurnedAmount, bytes memory lastPayload)
    {
        SafeERC20.safeTransferFrom(
            OZIERC20(address(lbtc())),
            _msgSender(),
            address(this),
            amount
        );

        if (_lastPayload.length > 0) {
            // just return if already initiated
            lastBurnedAmount = _lastBurnedAmount;
            lastPayload = _lastPayload;
            _lastPayload = new bytes(0);
            _lastBurnedAmount = 0;
        } else {
            if (receiver.length > 32) revert ReceiverTooBig();
            if (amount >= 2 ** 64) revert AmountOverflow();
            IERC20(address(lbtc())).approve(address(bridge), amount);
            (lastBurnedAmount, lastPayload) = bridge.deposit(
                getChain[remoteChainSelector],
                bytes32(receiver),
                uint64(amount)
            );
        }

        bridge.lbtc().burn(lastBurnedAmount);
    }

    function deposit(
        address fromAddress,
        bytes32 _toChain,
        bytes32,
        bytes32 _toAddress,
        uint256 _amount,
        bytes memory _payload
    ) external payable virtual override {
        _onlyBridge();

        // transfer assets from bridge
        SafeERC20.safeTransferFrom(
            OZIERC20(address(lbtc())),
            _msgSender(),
            address(this),
            _amount
        );

        // if deposit was initiated by adapter do nothing
        if (fromAddress == address(this)) {
            return;
        }

        _lastBurnedAmount = _amount;
        _lastPayload = _payload;

        uint64 chainSelector = getRemoteChainSelector[_toChain];

        Client.EVM2AnyMessage memory message = _buildCCIPMessage(
            abi.encodePacked(_toAddress),
            _amount
        );

        address router = tokenPool.getRouter();

        uint256 fee = IRouterClient(router).getFee(chainSelector, message);

        if (msg.value < fee) {
            revert NotEnoughToPayFee(fee);
        }
        if (msg.value > fee) {
            uint256 refundAm = msg.value - fee;
            refunds[fromAddress] += refundAm;
        }

        IERC20(address(lbtc())).approve(router, _amount);
        IRouterClient(router).ccipSend{value: fee}(chainSelector, message);
    }

    /// @dev same as `initiateWithdrawal` but without signatures opted in data
    function initWithdrawalNoSignatures(
        uint64 remoteSelector,
        bytes calldata onChainData
    ) external onlyTokenPool returns (uint64) {
        _receive(getChain[remoteSelector], onChainData);
        return bridge.withdraw(onChainData);
    }

    function initiateWithdrawal(
        uint64 remoteSelector,
        bytes calldata payloadHash,
        bytes calldata offchainData
    ) external onlyTokenPool returns (uint64) {
        if (payloadHash.length != 32) {
            revert CLWrongPayloadHashLength();
        }

        (bytes memory payload, bytes memory proof) = abi.decode(
            offchainData,
            (bytes, bytes)
        );

        /// verify hash, because payload from offchainData is untrusted
        /// and would be replaced during manual execution.
        /// Bypass other payload checks against CCIP message
        /// because payload can only be generated in deposit transaction
        if (bytes32(payloadHash[:32]) != sha256(payload)) {
            revert CLPayloadMismatch();
        }

        _receive(getChain[remoteSelector], payload);
        bridge.authNotary(payload, proof);
        return bridge.withdraw(payload);
    }

    /// ONLY OWNER FUNCTIONS ///

    function setExecutionGasLimit(uint128 newVal) external onlyOwner {
        _setExecutionGasLimit(newVal);
    }

    /// PRIVATE FUNCTIONS ///

    function _buildCCIPMessage(
        bytes memory _receiver,
        uint256 _amount
    ) private view returns (Client.EVM2AnyMessage memory) {
        // Set the token amounts
        Client.EVMTokenAmount[]
            memory tokenAmounts = new Client.EVMTokenAmount[](1);
        tokenAmounts[0] = Client.EVMTokenAmount({
            token: address(bridge.lbtc()),
            amount: _amount
        });

        return
            Client.EVM2AnyMessage({
                receiver: _receiver,
                data: "",
                tokenAmounts: tokenAmounts,
                extraArgs: Client._argsToBytes(
                    Client.EVMExtraArgsV2({
                        gasLimit: getExecutionGasLimit,
                        allowOutOfOrderExecution: true
                    })
                ),
                feeToken: address(0) // let's pay with native tokens
            });
    }

    function _onlyOwner() internal view override onlyOwner {}

    function _setExecutionGasLimit(uint128 newVal) internal {
        emit ExecutionGasLimitSet(getExecutionGasLimit, newVal);
        getExecutionGasLimit = newVal;
    }

    /**
     * @notice Allows owner set chain selector for chain id
     * @param chain ABI encoded chain id
     * @param chainSelector Chain selector of chain id (https://docs.chain.link/ccip/directory/testnet/chain/)
     */
    function setRemoteChainSelector(
        bytes32 chain,
        uint64 chainSelector
    ) external onlyOwner {
        if (chain == bytes32(0)) {
            revert CLZeroChain();
        }
        if (chainSelector == 0) {
            revert CLZeroChain();
        }
        if (getRemoteChainSelector[chain] != 0) {
            revert CLAttemptToOverrideChainSelector();
        }
        if (getChain[chainSelector] != bytes32(0)) {
            revert CLAttemptToOverrideChain();
        }
        getRemoteChainSelector[chain] = chainSelector;
        getChain[chainSelector] = chain;
        emit CLChainSelectorSet(chain, chainSelector);
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.24;

import {IBridge} from "../IBridge.sol";

interface IAdapter {
    /// @notice Thrown when msg.value is not enough to pay CCIP fee.
    error NotEnoughToPayFee(uint256 fee);

    event ExecutionGasLimitSet(uint128 indexed prevVal, uint128 indexed newVal);

    function bridge() external view returns (IBridge);
    function getFee(
        bytes32 _toChain,
        bytes32 _toContract,
        bytes32 _toAddress,
        uint256 _amount,
        bytes memory _payload
    ) external view returns (uint256);
    function deposit(
        address _fromAddress,
        bytes32 _toChain,
        bytes32 _toContract,
        bytes32 _toAddress,
        uint256 _amount,
        bytes memory _payload
    ) external payable;
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.24;

import {IERC20} from "@chainlink/contracts-ccip/src/v0.8/vendor/openzeppelin-solidity/v4.8.3/contracts/token/ERC20/IERC20.sol";
import {IRouterClient} from "@chainlink/contracts-ccip/src/v0.8/ccip/interfaces/IRouterClient.sol";
import {Client} from "@chainlink/contracts-ccip/src/v0.8/ccip/libraries/Client.sol";
import {IBridge} from "../IBridge.sol";
import {Pool} from "@chainlink/contracts-ccip/src/v0.8/ccip/libraries/Pool.sol";
import {TokenPool} from "@chainlink/contracts-ccip/src/v0.8/ccip/pools/TokenPool.sol";
import {CLAdapter} from "./CLAdapter.sol";

contract LombardTokenPool is TokenPool {
    CLAdapter public adapter;

    /// @notice msg.sender gets the ownership of the contract given
    /// token pool implementation
    constructor(
        IERC20 lbtc_,
        address ccipRouter_,
        address[] memory allowlist_,
        address rmnProxy_,
        CLAdapter adapter_
    ) TokenPool(lbtc_, allowlist_, rmnProxy_, ccipRouter_) {
        adapter = adapter_;
    }

    /// @notice Burn the token in the pool
    /// @dev The _validateLockOrBurn check is an essential security check
    function lockOrBurn(
        Pool.LockOrBurnInV1 calldata lockOrBurnIn
    ) external virtual override returns (Pool.LockOrBurnOutV1 memory) {
        _validateLockOrBurn(lockOrBurnIn);

        // send out to burn
        i_token.approve(address(adapter), lockOrBurnIn.amount);
        (uint256 burnedAmount, bytes memory payload) = adapter.initiateDeposit(
            lockOrBurnIn.remoteChainSelector,
            lockOrBurnIn.receiver,
            lockOrBurnIn.amount
        );

        emit Burned(lockOrBurnIn.originalSender, burnedAmount);

        bytes memory destPoolData = abi.encode(sha256(payload));

        return
            Pool.LockOrBurnOutV1({
                destTokenAddress: getRemoteToken(
                    lockOrBurnIn.remoteChainSelector
                ),
                destPoolData: destPoolData
            });
    }

    /// @notice Mint tokens from the pool to the recipient
    /// @dev The _validateReleaseOrMint check is an essential security check
    function releaseOrMint(
        Pool.ReleaseOrMintInV1 calldata releaseOrMintIn
    ) external virtual override returns (Pool.ReleaseOrMintOutV1 memory) {
        _validateReleaseOrMint(releaseOrMintIn);

        uint64 amount = adapter.initiateWithdrawal(
            releaseOrMintIn.remoteChainSelector,
            releaseOrMintIn.sourcePoolData,
            releaseOrMintIn.offchainTokenData
        );

        emit Minted(msg.sender, releaseOrMintIn.receiver, uint256(amount));

        return Pool.ReleaseOrMintOutV1({destinationAmount: uint256(amount)});
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.24;

import {ILBTC} from "../LBTC/ILBTC.sol";
import "./adapters/IAdapter.sol";
import {IConsortiumConsumer, INotaryConsortium} from "../interfaces/IConsortiumConsumer.sol";

interface IBridge is IConsortiumConsumer {
    /// @notice Emitted when the destination is unknown.
    error UnknownDestination();

    /// @notice Emitted when the zero address is used.
    error Bridge_ZeroAddress();

    error Bridge_ZeroAmount();

    /// @notice Emitted adapter is not set for destination without consortium
    error BadConfiguration();

    /// @notice Emitted when the destination is already known.
    error KnownDestination();

    /// @notice Emitted when the zero contract hash is used.
    error ZeroContractHash();

    /// @notice Emitted when the chain id is invalid.
    error ZeroChainId();

    /// @notice Emitted when the destination is not valid.
    error NotValidDestination();

    /// @notice Emitted when amount is below commission
    error AmountLessThanCommission(uint256 commission);

    /// @notice Emitted when the origin contract is unknown.
    error UnknownOriginContract(bytes32 fromChain, bytes32 fromContract);

    /// @notice Emitted when the unexpected action is used.
    error UnexpectedAction(bytes4 action);

    error UnknownAdapter(address);

    error PayloadAlreadyUsed(bytes32);

    /// @notice Emitted no payload submitted by adapter
    error AdapterNotConfirmed();

    /// @notice Emitted no payload submitted by consortium
    error ConsortiumNotConfirmed();

    /// @notice Emitted when the deposit absolute commission is changed.
    event DepositAbsoluteCommissionChanged(
        uint64 newValue,
        bytes32 indexed chain
    );

    /// @notice Emitted when the deposit relative commission is changed.
    event DepositRelativeCommissionChanged(
        uint16 newValue,
        bytes32 indexed chain
    );

    /// @notice Emitted when a bridge destination is added.
    event BridgeDestinationAdded(
        bytes32 indexed chain,
        bytes32 indexed contractAddress
    );

    /// @notice Emitted when a bridge destination is removed.
    event BridgeDestinationRemoved(bytes32 indexed chain);

    /// @notice Emitted when the adapter is changed.
    event AdapterChanged(address previousAdapter, IAdapter newAdapter);

    /// @notice Emitted when the is a deposit in the bridge
    event DepositToBridge(
        address indexed fromAddress,
        bytes32 indexed toAddress,
        bytes32 indexed payloadHash,
        bytes payload
    );

    /// @notice Emitted when a withdraw is made from the bridge
    event WithdrawFromBridge(
        address indexed recipient,
        bytes32 indexed payloadHash,
        bytes payload,
        uint64 amount
    );

    event PayloadReceived(
        address indexed recipient,
        bytes32 indexed payloadHash,
        address indexed adapter
    );

    event PayloadNotarized(
        address indexed recipient,
        bytes32 indexed payloadHash
    );

    event RateLimitsChanged(
        bytes32 indexed chainId,
        uint256 limit,
        uint256 window
    );

    /// @notice Emitted when the treasury is changed.
    event TreasuryChanged(address previousTreasury, address newTreasury);

    function lbtc() external view returns (ILBTC);
    function receivePayload(bytes32 fromChain, bytes calldata payload) external;
    function deposit(
        bytes32 toChain,
        bytes32 toAddress,
        uint64 amount
    ) external payable returns (uint256, bytes memory);
    function authNotary(bytes calldata payload, bytes calldata proof) external;
    function withdraw(bytes calldata payload) external returns (uint64);
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.24;

import {ECDSA} from "@openzeppelin/contracts/utils/cryptography/ECDSA.sol";

interface INotaryConsortium {
    /// @dev Error thrown when signature payload is already used
    error PayloadAlreadyUsed();

    /// @dev Error thrown when signatures length is not equal to signers length
    error LengthMismatch();

    /// @dev Error thrown when there are not enough signatures
    error NotEnoughSignatures();

    /// @dev Error thrown when unexpected action is used
    error UnexpectedAction(bytes4 action);

    /// @dev Event emitted when the validator set is updated
    event ValidatorSetUpdated(
        uint256 indexed epoch,
        address[] validators,
        uint256[] weights,
        uint256 threshold
    );

    /// @dev Error thrown when validator set already set
    error ValSetAlreadySet();

    /// @dev Error thrown when no validator set is set
    error NoValidatorSet();

    /// @dev Error thrown when invalid epoch is provided
    error InvalidEpoch();

    function checkProof(
        bytes32 _payloadHash,
        bytes calldata _proof
    ) external view;
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.24;

import {INotaryConsortium} from "../consortium/INotaryConsortium.sol";

/**
 * @title Consortium Consumer interface
 * @author Lombard.Finance
 * @notice Common interface for contracts who verify signatures with `INotaryConsortium`
 */
interface IConsortiumConsumer {
    event ConsortiumChanged(
        INotaryConsortium indexed prevVal,
        INotaryConsortium indexed newVal
    );

    function changeConsortium(INotaryConsortium newVal) external;
    function consortium() external view returns (INotaryConsortium);
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.24;

interface ILBTC {
    error ZeroAddress();
    error ZeroContractHash();
    error ZeroChainId();
    error WithdrawalsDisabled();
    error KnownDestination();
    error UnknownDestination();
    error ScriptPubkeyUnsupported();
    error AmountLessThanCommission(uint256 fee);
    error AmountBelowDustLimit(uint256 dustLimit);
    error InvalidDustFeeRate();
    error UnauthorizedAccount(address account);
    error UnexpectedAction(bytes4 action);
    error InvalidUserSignature();
    error PayloadAlreadyUsed();
    error InvalidInputLength();
    error InvalidMintAmount();

    event PauserRoleTransferred(
        address indexed previousPauser,
        address indexed newPauser
    );
    event OperatorRoleTransferred(
        address indexed previousOperator,
        address indexed newOperator
    );
    event UnstakeRequest(
        address indexed fromAddress,
        bytes scriptPubKey,
        uint256 amount
    );
    event WithdrawalsEnabled(bool);
    event NameAndSymbolChanged(string name, string symbol);
    event ConsortiumChanged(address indexed prevVal, address indexed newVal);
    event TreasuryAddressChanged(
        address indexed prevValue,
        address indexed newValue
    );
    event BurnCommissionChanged(
        uint64 indexed prevValue,
        uint64 indexed newValue
    );
    event DustFeeRateChanged(uint256 indexed oldRate, uint256 indexed newRate);
    event BasculeChanged(address indexed prevVal, address indexed newVal);
    event MinterUpdated(address indexed minter, bool isMinter);
    event BridgeChanged(address indexed prevVal, address indexed newVal);
    event ClaimerUpdated(address indexed claimer, bool isClaimer);
    event FeeCharged(uint256 indexed fee, bytes userSignature);
    event FeeChanged(uint256 indexed oldFee, uint256 indexed newFee);
    error FeeGreaterThanAmount();

    event MintProofConsumed(
        address indexed recipient,
        bytes32 indexed payloadHash,
        bytes payload
    );

    event BatchMintSkipped(bytes32 indexed payloadHash, bytes payload);

    function burn(uint256 amount) external;
    function burn(address from, uint256 amount) external;
    function mint(address to, uint256 amount) external;
}