Contract Source Code:
File 1 of 1 : EtherToken
pragma solidity 0.4.25;
/// @title provides subject to role checking logic
contract IAccessPolicy {
////////////////////////
// Public functions
////////////////////////
/// @notice We don't make this function constant to allow for state-updating access controls such as rate limiting.
/// @dev checks if subject belongs to requested role for particular object
/// @param subject address to be checked against role, typically msg.sender
/// @param role identifier of required role
/// @param object contract instance context for role checking, typically contract requesting the check
/// @param verb additional data, in current AccessControll implementation msg.sig
/// @return if subject belongs to a role
function allowed(
address subject,
bytes32 role,
address object,
bytes4 verb
)
public
returns (bool);
}
/// @title enables access control in implementing contract
/// @dev see AccessControlled for implementation
contract IAccessControlled {
////////////////////////
// Events
////////////////////////
/// @dev must log on access policy change
event LogAccessPolicyChanged(
address controller,
IAccessPolicy oldPolicy,
IAccessPolicy newPolicy
);
////////////////////////
// Public functions
////////////////////////
/// @dev allows to change access control mechanism for this contract
/// this method must be itself access controlled, see AccessControlled implementation and notice below
/// @notice it is a huge issue for Solidity that modifiers are not part of function signature
/// then interfaces could be used for example to control access semantics
/// @param newPolicy new access policy to controll this contract
/// @param newAccessController address of ROLE_ACCESS_CONTROLLER of new policy that can set access to this contract
function setAccessPolicy(IAccessPolicy newPolicy, address newAccessController)
public;
function accessPolicy()
public
constant
returns (IAccessPolicy);
}
contract StandardRoles {
////////////////////////
// Constants
////////////////////////
// @notice Soldity somehow doesn't evaluate this compile time
// @dev role which has rights to change permissions and set new policy in contract, keccak256("AccessController")
bytes32 internal constant ROLE_ACCESS_CONTROLLER = 0xac42f8beb17975ed062dcb80c63e6d203ef1c2c335ced149dc5664cc671cb7da;
}
/// @title Granular code execution permissions
/// @notice Intended to replace existing Ownable pattern with more granular permissions set to execute smart contract functions
/// for each function where 'only' modifier is applied, IAccessPolicy implementation is called to evaluate if msg.sender belongs to required role for contract being called.
/// Access evaluation specific belong to IAccessPolicy implementation, see RoleBasedAccessPolicy for details.
/// @dev Should be inherited by a contract requiring such permissions controll. IAccessPolicy must be provided in constructor. Access policy may be replaced to a different one
/// by msg.sender with ROLE_ACCESS_CONTROLLER role
contract AccessControlled is IAccessControlled, StandardRoles {
////////////////////////
// Mutable state
////////////////////////
IAccessPolicy private _accessPolicy;
////////////////////////
// Modifiers
////////////////////////
/// @dev limits function execution only to senders assigned to required 'role'
modifier only(bytes32 role) {
require(_accessPolicy.allowed(msg.sender, role, this, msg.sig));
_;
}
////////////////////////
// Constructor
////////////////////////
constructor(IAccessPolicy policy) internal {
require(address(policy) != 0x0);
_accessPolicy = policy;
}
////////////////////////
// Public functions
////////////////////////
//
// Implements IAccessControlled
//
function setAccessPolicy(IAccessPolicy newPolicy, address newAccessController)
public
only(ROLE_ACCESS_CONTROLLER)
{
// ROLE_ACCESS_CONTROLLER must be present
// under the new policy. This provides some
// protection against locking yourself out.
require(newPolicy.allowed(newAccessController, ROLE_ACCESS_CONTROLLER, this, msg.sig));
// We can now safely set the new policy without foot shooting.
IAccessPolicy oldPolicy = _accessPolicy;
_accessPolicy = newPolicy;
// Log event
emit LogAccessPolicyChanged(msg.sender, oldPolicy, newPolicy);
}
function accessPolicy()
public
constant
returns (IAccessPolicy)
{
return _accessPolicy;
}
}
contract IsContract {
////////////////////////
// Internal functions
////////////////////////
function isContract(address addr)
internal
constant
returns (bool)
{
uint256 size;
// takes 700 gas
assembly { size := extcodesize(addr) }
return size > 0;
}
}
/// @title standard access roles of the Platform
/// @dev constants are kept in CODE not in STORAGE so they are comparatively cheap
contract AccessRoles {
////////////////////////
// Constants
////////////////////////
// NOTE: All roles are set to the keccak256 hash of the
// CamelCased role name, i.e.
// ROLE_LOCKED_ACCOUNT_ADMIN = keccak256("LockedAccountAdmin")
// May issue (generate) Neumarks
bytes32 internal constant ROLE_NEUMARK_ISSUER = 0x921c3afa1f1fff707a785f953a1e197bd28c9c50e300424e015953cbf120c06c;
// May burn Neumarks it owns
bytes32 internal constant ROLE_NEUMARK_BURNER = 0x19ce331285f41739cd3362a3ec176edffe014311c0f8075834fdd19d6718e69f;
// May create new snapshots on Neumark
bytes32 internal constant ROLE_SNAPSHOT_CREATOR = 0x08c1785afc57f933523bc52583a72ce9e19b2241354e04dd86f41f887e3d8174;
// May enable/disable transfers on Neumark
bytes32 internal constant ROLE_TRANSFER_ADMIN = 0xb6527e944caca3d151b1f94e49ac5e223142694860743e66164720e034ec9b19;
// may reclaim tokens/ether from contracts supporting IReclaimable interface
bytes32 internal constant ROLE_RECLAIMER = 0x0542bbd0c672578966dcc525b30aa16723bb042675554ac5b0362f86b6e97dc5;
// represents legally platform operator in case of forks and contracts with legal agreement attached. keccak256("PlatformOperatorRepresentative")
bytes32 internal constant ROLE_PLATFORM_OPERATOR_REPRESENTATIVE = 0xb2b321377653f655206f71514ff9f150d0822d062a5abcf220d549e1da7999f0;
// allows to deposit EUR-T and allow addresses to send and receive EUR-T. keccak256("EurtDepositManager")
bytes32 internal constant ROLE_EURT_DEPOSIT_MANAGER = 0x7c8ecdcba80ce87848d16ad77ef57cc196c208fc95c5638e4a48c681a34d4fe7;
// allows to register identities and change associated claims keccak256("IdentityManager")
bytes32 internal constant ROLE_IDENTITY_MANAGER = 0x32964e6bc50f2aaab2094a1d311be8bda920fc4fb32b2fb054917bdb153a9e9e;
// allows to replace controller on euro token and to destroy tokens without withdraw kecckak256("EurtLegalManager")
bytes32 internal constant ROLE_EURT_LEGAL_MANAGER = 0x4eb6b5806954a48eb5659c9e3982d5e75bfb2913f55199877d877f157bcc5a9b;
// allows to change known interfaces in universe kecckak256("UniverseManager")
bytes32 internal constant ROLE_UNIVERSE_MANAGER = 0xe8d8f8f9ea4b19a5a4368dbdace17ad71a69aadeb6250e54c7b4c7b446301738;
// allows to exchange gas for EUR-T keccak("GasExchange")
bytes32 internal constant ROLE_GAS_EXCHANGE = 0x9fe43636e0675246c99e96d7abf9f858f518b9442c35166d87f0934abef8a969;
// allows to set token exchange rates keccak("TokenRateOracle")
bytes32 internal constant ROLE_TOKEN_RATE_ORACLE = 0xa80c3a0c8a5324136e4c806a778583a2a980f378bdd382921b8d28dcfe965585;
}
contract IBasicToken {
////////////////////////
// Events
////////////////////////
event Transfer(
address indexed from,
address indexed to,
uint256 amount
);
////////////////////////
// Public functions
////////////////////////
/// @dev This function makes it easy to get the total number of tokens
/// @return The total number of tokens
function totalSupply()
public
constant
returns (uint256);
/// @param owner The address that's balance is being requested
/// @return The balance of `owner` at the current block
function balanceOf(address owner)
public
constant
returns (uint256 balance);
/// @notice Send `amount` tokens to `to` from `msg.sender`
/// @param to The address of the recipient
/// @param amount The amount of tokens to be transferred
/// @return Whether the transfer was successful or not
function transfer(address to, uint256 amount)
public
returns (bool success);
}
/// @title allows deriving contract to recover any token or ether that it has balance of
/// @notice note that this opens your contracts to claims from various people saying they lost tokens and they want them back
/// be ready to handle such claims
/// @dev use with care!
/// 1. ROLE_RECLAIMER is allowed to claim tokens, it's not returning tokens to original owner
/// 2. in derived contract that holds any token by design you must override `reclaim` and block such possibility.
/// see ICBMLockedAccount as an example
contract Reclaimable is AccessControlled, AccessRoles {
////////////////////////
// Constants
////////////////////////
IBasicToken constant internal RECLAIM_ETHER = IBasicToken(0x0);
////////////////////////
// Public functions
////////////////////////
function reclaim(IBasicToken token)
public
only(ROLE_RECLAIMER)
{
address reclaimer = msg.sender;
if(token == RECLAIM_ETHER) {
reclaimer.transfer(address(this).balance);
} else {
uint256 balance = token.balanceOf(this);
require(token.transfer(reclaimer, balance));
}
}
}
contract ITokenMetadata {
////////////////////////
// Public functions
////////////////////////
function symbol()
public
constant
returns (string);
function name()
public
constant
returns (string);
function decimals()
public
constant
returns (uint8);
}
/// @title adds token metadata to token contract
/// @dev see Neumark for example implementation
contract TokenMetadata is ITokenMetadata {
////////////////////////
// Immutable state
////////////////////////
// The Token's name: e.g. DigixDAO Tokens
string private NAME;
// An identifier: e.g. REP
string private SYMBOL;
// Number of decimals of the smallest unit
uint8 private DECIMALS;
// An arbitrary versioning scheme
string private VERSION;
////////////////////////
// Constructor
////////////////////////
/// @notice Constructor to set metadata
/// @param tokenName Name of the new token
/// @param decimalUnits Number of decimals of the new token
/// @param tokenSymbol Token Symbol for the new token
/// @param version Token version ie. when cloning is used
constructor(
string tokenName,
uint8 decimalUnits,
string tokenSymbol,
string version
)
public
{
NAME = tokenName; // Set the name
SYMBOL = tokenSymbol; // Set the symbol
DECIMALS = decimalUnits; // Set the decimals
VERSION = version;
}
////////////////////////
// Public functions
////////////////////////
function name()
public
constant
returns (string)
{
return NAME;
}
function symbol()
public
constant
returns (string)
{
return SYMBOL;
}
function decimals()
public
constant
returns (uint8)
{
return DECIMALS;
}
function version()
public
constant
returns (string)
{
return VERSION;
}
}
/// @title controls spending approvals
/// @dev TokenAllowance observes this interface, Neumark contract implements it
contract MTokenAllowanceController {
////////////////////////
// Internal functions
////////////////////////
/// @notice Notifies the controller about an approval allowing the
/// controller to react if desired
/// @param owner The address that calls `approve()`
/// @param spender The spender in the `approve()` call
/// @param amount The amount in the `approve()` call
/// @return False if the controller does not authorize the approval
function mOnApprove(
address owner,
address spender,
uint256 amount
)
internal
returns (bool allow);
/// @notice Allows to override allowance approved by the owner
/// Primary role is to enable forced transfers, do not override if you do not like it
/// Following behavior is expected in the observer
/// approve() - should revert if mAllowanceOverride() > 0
/// allowance() - should return mAllowanceOverride() if set
/// transferFrom() - should override allowance if mAllowanceOverride() > 0
/// @param owner An address giving allowance to spender
/// @param spender An address getting a right to transfer allowance amount from the owner
/// @return current allowance amount
function mAllowanceOverride(
address owner,
address spender
)
internal
constant
returns (uint256 allowance);
}
/// @title controls token transfers
/// @dev BasicSnapshotToken observes this interface, Neumark contract implements it
contract MTokenTransferController {
////////////////////////
// Internal functions
////////////////////////
/// @notice Notifies the controller about a token transfer allowing the
/// controller to react if desired
/// @param from The origin of the transfer
/// @param to The destination of the transfer
/// @param amount The amount of the transfer
/// @return False if the controller does not authorize the transfer
function mOnTransfer(
address from,
address to,
uint256 amount
)
internal
returns (bool allow);
}
/// @title controls approvals and transfers
/// @dev The token controller contract must implement these functions, see Neumark as example
/// @dev please note that controller may be a separate contract that is called from mOnTransfer and mOnApprove functions
contract MTokenController is MTokenTransferController, MTokenAllowanceController {
}
contract TrustlessTokenController is
MTokenController
{
////////////////////////
// Internal functions
////////////////////////
//
// Implements MTokenController
//
function mOnTransfer(
address /*from*/,
address /*to*/,
uint256 /*amount*/
)
internal
returns (bool allow)
{
return true;
}
function mOnApprove(
address /*owner*/,
address /*spender*/,
uint256 /*amount*/
)
internal
returns (bool allow)
{
return true;
}
}
contract IERC20Allowance {
////////////////////////
// Events
////////////////////////
event Approval(
address indexed owner,
address indexed spender,
uint256 amount
);
////////////////////////
// Public functions
////////////////////////
/// @dev This function makes it easy to read the `allowed[]` map
/// @param owner The address of the account that owns the token
/// @param spender The address of the account able to transfer the tokens
/// @return Amount of remaining tokens of owner that spender is allowed
/// to spend
function allowance(address owner, address spender)
public
constant
returns (uint256 remaining);
/// @notice `msg.sender` approves `spender` to spend `amount` tokens on
/// its behalf. This is a modified version of the ERC20 approve function
/// to be a little bit safer
/// @param spender The address of the account able to transfer the tokens
/// @param amount The amount of tokens to be approved for transfer
/// @return True if the approval was successful
function approve(address spender, uint256 amount)
public
returns (bool success);
/// @notice Send `amount` tokens to `to` from `from` on the condition it
/// is approved by `from`
/// @param from The address holding the tokens being transferred
/// @param to The address of the recipient
/// @param amount The amount of tokens to be transferred
/// @return True if the transfer was successful
function transferFrom(address from, address to, uint256 amount)
public
returns (bool success);
}
contract IERC20Token is IBasicToken, IERC20Allowance {
}
contract IERC677Callback {
////////////////////////
// Public functions
////////////////////////
// NOTE: This call can be initiated by anyone. You need to make sure that
// it is send by the token (`require(msg.sender == token)`) or make sure
// amount is valid (`require(token.allowance(this) >= amount)`).
function receiveApproval(
address from,
uint256 amount,
address token, // IERC667Token
bytes data
)
public
returns (bool success);
}
contract IERC677Allowance is IERC20Allowance {
////////////////////////
// Public functions
////////////////////////
/// @notice `msg.sender` approves `spender` to send `amount` tokens on
/// its behalf, and then a function is triggered in the contract that is
/// being approved, `spender`. This allows users to use their tokens to
/// interact with contracts in one function call instead of two
/// @param spender The address of the contract able to transfer the tokens
/// @param amount The amount of tokens to be approved for transfer
/// @return True if the function call was successful
function approveAndCall(address spender, uint256 amount, bytes extraData)
public
returns (bool success);
}
contract IERC677Token is IERC20Token, IERC677Allowance {
}
contract Math {
////////////////////////
// Internal functions
////////////////////////
// absolute difference: |v1 - v2|
function absDiff(uint256 v1, uint256 v2)
internal
pure
returns(uint256)
{
return v1 > v2 ? v1 - v2 : v2 - v1;
}
// divide v by d, round up if remainder is 0.5 or more
function divRound(uint256 v, uint256 d)
internal
pure
returns(uint256)
{
return add(v, d/2) / d;
}
// computes decimal decimalFraction 'frac' of 'amount' with maximum precision (multiplication first)
// both amount and decimalFraction must have 18 decimals precision, frac 10**18 represents a whole (100% of) amount
// mind loss of precision as decimal fractions do not have finite binary expansion
// do not use instead of division
function decimalFraction(uint256 amount, uint256 frac)
internal
pure
returns(uint256)
{
// it's like 1 ether is 100% proportion
return proportion(amount, frac, 10**18);
}
// computes part/total of amount with maximum precision (multiplication first)
// part and total must have the same units
function proportion(uint256 amount, uint256 part, uint256 total)
internal
pure
returns(uint256)
{
return divRound(mul(amount, part), total);
}
//
// Open Zeppelin Math library below
//
function mul(uint256 a, uint256 b)
internal
pure
returns (uint256)
{
uint256 c = a * b;
assert(a == 0 || c / a == b);
return c;
}
function sub(uint256 a, uint256 b)
internal
pure
returns (uint256)
{
assert(b <= a);
return a - b;
}
function add(uint256 a, uint256 b)
internal
pure
returns (uint256)
{
uint256 c = a + b;
assert(c >= a);
return c;
}
function min(uint256 a, uint256 b)
internal
pure
returns (uint256)
{
return a < b ? a : b;
}
function max(uint256 a, uint256 b)
internal
pure
returns (uint256)
{
return a > b ? a : b;
}
}
/// @title internal token transfer function
/// @dev see BasicSnapshotToken for implementation
contract MTokenTransfer {
////////////////////////
// Internal functions
////////////////////////
/// @dev This is the actual transfer function in the token contract, it can
/// only be called by other functions in this contract.
/// @param from The address holding the tokens being transferred
/// @param to The address of the recipient
/// @param amount The amount of tokens to be transferred
/// @dev reverts if transfer was not successful
function mTransfer(
address from,
address to,
uint256 amount
)
internal;
}
/**
* @title Basic token
* @dev Basic version of StandardToken, with no allowances.
*/
contract BasicToken is
MTokenTransfer,
MTokenTransferController,
IBasicToken,
Math
{
////////////////////////
// Mutable state
////////////////////////
mapping(address => uint256) internal _balances;
uint256 internal _totalSupply;
////////////////////////
// Public functions
////////////////////////
/**
* @dev transfer token for a specified address
* @param to The address to transfer to.
* @param amount The amount to be transferred.
*/
function transfer(address to, uint256 amount)
public
returns (bool)
{
mTransfer(msg.sender, to, amount);
return true;
}
/// @dev This function makes it easy to get the total number of tokens
/// @return The total number of tokens
function totalSupply()
public
constant
returns (uint256)
{
return _totalSupply;
}
/**
* @dev Gets the balance of the specified address.
* @param owner The address to query the the balance of.
* @return An uint256 representing the amount owned by the passed address.
*/
function balanceOf(address owner)
public
constant
returns (uint256 balance)
{
return _balances[owner];
}
////////////////////////
// Internal functions
////////////////////////
//
// Implements MTokenTransfer
//
function mTransfer(address from, address to, uint256 amount)
internal
{
require(to != address(0));
require(mOnTransfer(from, to, amount));
_balances[from] = sub(_balances[from], amount);
_balances[to] = add(_balances[to], amount);
emit Transfer(from, to, amount);
}
}
/// @title token spending approval and transfer
/// @dev implements token approval and transfers and exposes relevant part of ERC20 and ERC677 approveAndCall
/// may be mixed in with any basic token (implementing mTransfer) like BasicSnapshotToken or MintableSnapshotToken to add approval mechanism
/// observes MTokenAllowanceController interface
/// observes MTokenTransfer
contract TokenAllowance is
MTokenTransfer,
MTokenAllowanceController,
IERC20Allowance,
IERC677Token
{
////////////////////////
// Mutable state
////////////////////////
// `allowed` tracks rights to spends others tokens as per ERC20
// owner => spender => amount
mapping (address => mapping (address => uint256)) private _allowed;
////////////////////////
// Constructor
////////////////////////
constructor()
internal
{
}
////////////////////////
// Public functions
////////////////////////
//
// Implements IERC20Token
//
/// @dev This function makes it easy to read the `allowed[]` map
/// @param owner The address of the account that owns the token
/// @param spender The address of the account able to transfer the tokens
/// @return Amount of remaining tokens of _owner that _spender is allowed
/// to spend
function allowance(address owner, address spender)
public
constant
returns (uint256 remaining)
{
uint256 override = mAllowanceOverride(owner, spender);
if (override > 0) {
return override;
}
return _allowed[owner][spender];
}
/// @notice `msg.sender` approves `_spender` to spend `_amount` tokens on
/// its behalf. This is a modified version of the ERC20 approve function
/// where allowance per spender must be 0 to allow change of such allowance
/// @param spender The address of the account able to transfer the tokens
/// @param amount The amount of tokens to be approved for transfer
/// @return True or reverts, False is never returned
function approve(address spender, uint256 amount)
public
returns (bool success)
{
// Alerts the token controller of the approve function call
require(mOnApprove(msg.sender, spender, amount));
// To change the approve amount you first have to reduce the addresses`
// allowance to zero by calling `approve(_spender,0)` if it is not
// already 0 to mitigate the race condition described here:
// https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
require((amount == 0 || _allowed[msg.sender][spender] == 0) && mAllowanceOverride(msg.sender, spender) == 0);
_allowed[msg.sender][spender] = amount;
emit Approval(msg.sender, spender, amount);
return true;
}
/// @notice Send `_amount` tokens to `_to` from `_from` on the condition it
/// is approved by `_from`
/// @param from The address holding the tokens being transferred
/// @param to The address of the recipient
/// @param amount The amount of tokens to be transferred
/// @return True if the transfer was successful, reverts in any other case
function transferFrom(address from, address to, uint256 amount)
public
returns (bool success)
{
uint256 allowed = mAllowanceOverride(from, msg.sender);
if (allowed == 0) {
// The standard ERC 20 transferFrom functionality
allowed = _allowed[from][msg.sender];
// yes this will underflow but then we'll revert. will cost gas however so don't underflow
_allowed[from][msg.sender] -= amount;
}
require(allowed >= amount);
mTransfer(from, to, amount);
return true;
}
//
// Implements IERC677Token
//
/// @notice `msg.sender` approves `_spender` to send `_amount` tokens on
/// its behalf, and then a function is triggered in the contract that is
/// being approved, `_spender`. This allows users to use their tokens to
/// interact with contracts in one function call instead of two
/// @param spender The address of the contract able to transfer the tokens
/// @param amount The amount of tokens to be approved for transfer
/// @return True or reverts, False is never returned
function approveAndCall(
address spender,
uint256 amount,
bytes extraData
)
public
returns (bool success)
{
require(approve(spender, amount));
success = IERC677Callback(spender).receiveApproval(
msg.sender,
amount,
this,
extraData
);
require(success);
return true;
}
////////////////////////
// Internal functions
////////////////////////
//
// Implements default MTokenAllowanceController
//
// no override in default implementation
function mAllowanceOverride(
address /*owner*/,
address /*spender*/
)
internal
constant
returns (uint256)
{
return 0;
}
}
/**
* @title Standard ERC20 token
*
* @dev Implementation of the standard token.
* @dev https://github.com/ethereum/EIPs/issues/20
*/
contract StandardToken is
IERC20Token,
BasicToken,
TokenAllowance
{
}
/// @title uniquely identifies deployable (non-abstract) platform contract
/// @notice cheap way of assigning implementations to knownInterfaces which represent system services
/// unfortunatelly ERC165 does not include full public interface (ABI) and does not provide way to list implemented interfaces
/// EIP820 still in the making
/// @dev ids are generated as follows keccak256("neufund-platform:<contract name>")
/// ids roughly correspond to ABIs
contract IContractId {
/// @param id defined as above
/// @param version implementation version
function contractId() public pure returns (bytes32 id, uint256 version);
}
/// @title current ERC223 fallback function
/// @dev to be used in all future token contract
/// @dev NEU and ICBMEtherToken (obsolete) are the only contracts that still uses IERC223LegacyCallback
contract IERC223Callback {
////////////////////////
// Public functions
////////////////////////
function tokenFallback(address from, uint256 amount, bytes data)
public;
}
contract IERC223Token is IERC20Token, ITokenMetadata {
/// @dev Departure: We do not log data, it has no advantage over a standard
/// log event. By sticking to the standard log event we
/// stay compatible with constracts that expect and ERC20 token.
// event Transfer(
// address indexed from,
// address indexed to,
// uint256 amount,
// bytes data);
/// @dev Departure: We do not use the callback on regular transfer calls to
/// stay compatible with constracts that expect and ERC20 token.
// function transfer(address to, uint256 amount)
// public
// returns (bool);
////////////////////////
// Public functions
////////////////////////
function transfer(address to, uint256 amount, bytes data)
public
returns (bool);
}
contract IWithdrawableToken {
////////////////////////
// Public functions
////////////////////////
/// @notice withdraws from a token holding assets
/// @dev amount of asset should be returned to msg.sender and corresponding balance burned
function withdraw(uint256 amount)
public;
}
contract EtherToken is
IsContract,
IContractId,
AccessControlled,
StandardToken,
TrustlessTokenController,
IWithdrawableToken,
TokenMetadata,
IERC223Token,
Reclaimable
{
////////////////////////
// Constants
////////////////////////
string private constant NAME = "Ether Token";
string private constant SYMBOL = "ETH-T";
uint8 private constant DECIMALS = 18;
////////////////////////
// Events
////////////////////////
event LogDeposit(
address indexed to,
uint256 amount
);
event LogWithdrawal(
address indexed from,
uint256 amount
);
event LogWithdrawAndSend(
address indexed from,
address indexed to,
uint256 amount
);
////////////////////////
// Constructor
////////////////////////
constructor(IAccessPolicy accessPolicy)
AccessControlled(accessPolicy)
StandardToken()
TokenMetadata(NAME, DECIMALS, SYMBOL, "")
Reclaimable()
public
{
}
////////////////////////
// Public functions
////////////////////////
/// deposit msg.value of Ether to msg.sender balance
function deposit()
public
payable
{
depositPrivate();
emit Transfer(address(0), msg.sender, msg.value);
}
/// @notice convenience function to deposit and immediately transfer amount
/// @param transferTo where to transfer after deposit
/// @param amount total amount to transfer, must be <= balance after deposit
/// @param data erc223 data
/// @dev intended to deposit from simple account and invest in ETO
function depositAndTransfer(address transferTo, uint256 amount, bytes data)
public
payable
{
depositPrivate();
transfer(transferTo, amount, data);
}
/// withdraws and sends 'amount' of ether to msg.sender
function withdraw(uint256 amount)
public
{
withdrawPrivate(amount);
msg.sender.transfer(amount);
}
/// @notice convenience function to withdraw and transfer to external account
/// @param sendTo address to which send total amount
/// @param amount total amount to withdraw and send
/// @dev function is payable and is meant to withdraw funds on accounts balance and token in single transaction
/// @dev BEWARE that msg.sender of the funds is Ether Token contract and not simple account calling it.
/// @dev when sent to smart conctract funds may be lost, so this is prevented below
function withdrawAndSend(address sendTo, uint256 amount)
public
payable
{
// must send at least what is in msg.value to being another deposit function
require(amount >= msg.value, "NF_ET_NO_DEPOSIT");
if (amount > msg.value) {
uint256 withdrawRemainder = amount - msg.value;
withdrawPrivate(withdrawRemainder);
}
emit LogWithdrawAndSend(msg.sender, sendTo, amount);
sendTo.transfer(amount);
}
//
// Implements IERC223Token
//
function transfer(address to, uint256 amount, bytes data)
public
returns (bool)
{
BasicToken.mTransfer(msg.sender, to, amount);
// Notify the receiving contract.
if (isContract(to)) {
// in case of re-entry (1) transfer is done (2) msg.sender is different
IERC223Callback(to).tokenFallback(msg.sender, amount, data);
}
return true;
}
//
// Overrides Reclaimable
//
/// @notice allows EtherToken to reclaim tokens wrongly sent to its address
/// @dev as EtherToken by design has balance of Ether (native Ethereum token)
/// such reclamation is not allowed
function reclaim(IBasicToken token)
public
{
// forbid reclaiming ETH hold in this contract.
require(token != RECLAIM_ETHER);
Reclaimable.reclaim(token);
}
//
// Implements IContractId
//
function contractId() public pure returns (bytes32 id, uint256 version) {
return (0x75b86bc24f77738576716a36431588ae768d80d077231d1661c2bea674c6373a, 0);
}
////////////////////////
// Private functions
////////////////////////
function depositPrivate()
private
{
_balances[msg.sender] = add(_balances[msg.sender], msg.value);
_totalSupply = add(_totalSupply, msg.value);
emit LogDeposit(msg.sender, msg.value);
}
function withdrawPrivate(uint256 amount)
private
{
require(_balances[msg.sender] >= amount);
_balances[msg.sender] = sub(_balances[msg.sender], amount);
_totalSupply = sub(_totalSupply, amount);
emit LogWithdrawal(msg.sender, amount);
emit Transfer(msg.sender, address(0), amount);
}
}