Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Is this a proxy?
• Similar
• Sol2Uml
• Submit Audit
• Compare

// SPDX-License-Identifier: AGPL-3.0
pragma solidity 0.8.28;

import {BaseHealthCheck, ERC20} from "@periphery/Bases/HealthCheck/BaseHealthCheck.sol";
import {SafeERC20} from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import {UniswapV3Swapper} from "@periphery/swappers/UniswapV3Swapper.sol";
import {Auction} from "@periphery/Auctions/Auction.sol";
import {IStaking} from "src/interfaces/IStaking.sol";
import {IPsmWrapper} from "src/interfaces/IPsmWrapper.sol";

contract SparkCompounder is UniswapV3Swapper, BaseHealthCheck {
    using SafeERC20 for ERC20;

    /// @notice yearn's referral code
    uint16 public referral = 1007;

    /// @notice Address of the specific Auction this strategy uses.
    address public auction;

    /// @notice True if we should use auctions, if false use UniV3
    bool public useAuction;

    /// @notice True if strategy deposits are open to any address
    bool public openDeposits;

    /// @notice Mapping of addresses and whether they are allowed to deposit to this strategy
    mapping(address => bool) public allowed;

    /// @notice Reward token we get for staking
    address public immutable REWARDS_TOKEN;

    /// @notice Staking contract we use
    IStaking public constant STAKING =
        IStaking(0x173e314C7635B45322cd8Cb14f44b312e079F3af);

    /// @notice Wrapper for PSM with USDS
    IPsmWrapper internal constant PSM_WRAPPER =
        IPsmWrapper(0xA188EEC8F81263234dA3622A406892F3D630f98c);

    /// @notice Don't bother spending the gas to stake dust
    uint256 internal constant DUST = 1e18;

    constructor() BaseHealthCheck(PSM_WRAPPER.usds(), "Spark USDS Compounder") {
        require(!STAKING.paused(), "!paused");
        require(PSM_WRAPPER.usds() == STAKING.stakingToken(), "!stakingToken");
        REWARDS_TOKEN = STAKING.rewardsToken();

        // approve staking contract and our PSM wrapper
        asset.forceApprove(address(STAKING), type(uint256).max);

        // use USDC for our UniV3 swaps and then send it through the PSM for USDS
        address usdc = PSM_WRAPPER.gem();
        ERC20(usdc).forceApprove(address(PSM_WRAPPER), type(uint).max); //approve the PSM

        // Set the min amount for the swapper/auction to sell
        base = usdc; // use USDC as base in UniV3
        minAmountToSell = 5_000e18; // SPK is ~$0.03
        _setUniFees(REWARDS_TOKEN, usdc, 100); // SPK-USDC pool is 0.01%. uniV3 fees in 1/100 of bps
    }

    /* ========== VIEW FUNCTIONS ========== */

    function balanceOfAsset() public view returns (uint256) {
        return asset.balanceOf(address(this));
    }

    function balanceOfStake() public view returns (uint256) {
        return STAKING.balanceOf(address(this));
    }

    function balanceOfRewards() public view returns (uint256) {
        return ERC20(REWARDS_TOKEN).balanceOf(address(this));
    }

    function claimableRewards() external view returns (uint256) {
        return STAKING.earned(address(this));
    }

    /* ========== CORE STRATEGY FUNCTIONS ========== */

    function _deployFunds(uint256 _amount) internal override {
        STAKING.stake(_amount, referral);
    }

    function _freeFunds(uint256 _amount) internal override {
        STAKING.withdraw(_amount);
    }

    function _harvestAndReport()
        internal
        override
        returns (uint256 _totalAssets)
    {
        // get our rewards. if no rewards is a noop so no worries about reverts
        _claimRewards();

        // store in memory to save gas
        uint256 toSwap = balanceOfRewards();

        if (!useAuction) {
            if (toSwap > minAmountToSell) {
                // swap if using UniV3 to sell rewards
                _swapFrom(REWARDS_TOKEN, base, toSwap, 0);
                // use PSM to go from USDC to USDS for free, assuming psm.tin() stays zero
                PSM_WRAPPER.sellGem(
                    address(this),
                    ERC20(base).balanceOf(address(this))
                );
            }
        } else if (toSwap > minAmountToSell) {
            _kickAuction(REWARDS_TOKEN, toSwap);
        }

        uint256 balance = balanceOfAsset();
        if (!TokenizedStrategy.isShutdown()) {
            if (balance > DUST) {
                _deployFunds(balance);
            }
        }
        _totalAssets = balanceOfStake() + balanceOfAsset();
    }

    function _emergencyWithdraw(uint256 _amount) internal override {
        _amount = _min(_amount, balanceOfStake());
        _freeFunds(_amount);
    }

    function availableDepositLimit(
        address _receiver
    ) public view override returns (uint256) {
        if (STAKING.paused()) {
            return 0;
        } else if (openDeposits || allowed[_receiver]) {
            return type(uint256).max;
        } else {
            return 0;
        }
    }

    function _min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /* ========== REWARD & AUCTION FUNCTIONS ========== */

    /**
     * @notice Manually claim rewards from staking contract.
     * @dev Can only be called by management.
     */
    function claimRewards() external onlyManagement {
        _claimRewards();
    }

    function _claimRewards() internal {
        STAKING.getReward();
    }

    /**
     * @notice Kick an auction to sell rewards to more asset.
     * @dev Can only be called by keepers. useAuction must be set to true. Can't kick asset.
     * @param _token Token to kick the auction for.
     */
    function kickAuction(address _token) external onlyKeepers {
        require(useAuction, "!useAuction");
        uint256 rewardsBalance;

        if (_token == REWARDS_TOKEN) {
            _claimRewards();
            rewardsBalance = balanceOfRewards();
        } else {
            rewardsBalance = ERC20(_token).balanceOf(address(this));
        }

        if (rewardsBalance > minAmountToSell) {
            _kickAuction(_token, rewardsBalance);
        }
    }

    function _kickAuction(address _token, uint256 _balance) internal {
        require(_token != address(asset), "!asset");
        ERC20(_token).safeTransfer(auction, _balance);
        Auction(auction).kick(_token);
    }

    /* ========== PERMISSIONED SETTER FUNCTIONS ========== */

    /**
     * @notice Set the minimum amount of rewardsToken to sell.
     * @dev Can only be called by management.
     * @param _minAmountToSell minimum amount to sell in wei.
     */
    function setMinAmountToSell(
        uint256 _minAmountToSell
    ) external onlyManagement {
        minAmountToSell = _minAmountToSell;
    }

    /**
     * @notice Set fees for UniswapV3 to sell rewardsToken.
     * @dev Can only be called by management.
     * @param _rewardToBase fee reward to base (spk/usdc)
     */
    function setUniV3Fees(uint24 _rewardToBase) external onlyManagement {
        _setUniFees(REWARDS_TOKEN, base, _rewardToBase);
    }

    /**
     * @notice Set address for our auction contract.
     * @dev Can only be called by management.
     * @param _auction Address of the auction to use.
     */
    function setAuction(address _auction) external onlyManagement {
        if (_auction != address(0)) {
            require(Auction(_auction).receiver() == address(this), "receiver");
            require(Auction(_auction).want() == address(asset), "want");
        }
        auction = _auction;
    }

    /**
     * @notice Set whether to use auction or UniV3 for rewards selling.
     * @dev Can only be called by management.
     * @param _useAuction Use auction to sell rewards (true) or UniV3 (false).
     */
    function setUseAuction(bool _useAuction) external onlyManagement {
        if (_useAuction) require(auction != address(0), "!auction");
        useAuction = _useAuction;
    }

    /**
     * @notice Set the referral code for staking.
     * @dev Can only be called by management.
     * @param _referral Referral code for deposits in the staking contract.
     */
    function setReferral(uint16 _referral) external onlyManagement {
        referral = _referral;
    }

    /**
     * @notice Set whether deposits are open to anyone or restricted to our allowed mapping.
     * @dev Can only be called by management.
     * @param _openDeposits Allow deposits from anyone (true) or use mapping (false).
     */
    function setOpenDeposits(bool _openDeposits) external onlyManagement {
        openDeposits = _openDeposits;
    }

    /**
     * @notice Set whether an address can deposit to the strategy or not.
     * @dev Can only be called by management.
     * @param _depositor Address to set mapping for.
     * @param _allowed Whether the address is allowed to deposit to the strategy.
     */
    function setAllowed(
        address _depositor,
        bool _allowed
    ) external onlyManagement {
        allowed[_depositor] = _allowed;
    }
}

// SPDX-License-Identifier: AGPL-3.0
pragma solidity >=0.8.18;

import {BaseStrategy, ERC20} from "@tokenized-strategy/BaseStrategy.sol";

/**
 *   @title Base Health Check
 *   @author Yearn.finance
 *   @notice This contract can be inherited by any Yearn
 *   V3 strategy wishing to implement a health check during
 *   the `report` function in order to prevent any unexpected
 *   behavior from being permanently recorded as well as the
 *   `checkHealth` modifier.
 *
 *   A strategist simply needs to inherit this contract. Set
 *   the limit ratios to the desired amounts and then
 *   override `_harvestAndReport()` just as they otherwise
 *  would. If the profit or loss that would be recorded is
 *   outside the acceptable bounds the tx will revert.
 *
 *   The healthcheck does not prevent a strategy from reporting
 *   losses, but rather can make sure manual intervention is
 *   needed before reporting an unexpected loss or profit.
 */
abstract contract BaseHealthCheck is BaseStrategy {
    // Can be used to determine if a healthcheck should be called.
    // Defaults to true;
    bool public doHealthCheck = true;

    uint256 internal constant MAX_BPS = 10_000;

    // Default profit limit to 100%.
    uint16 private _profitLimitRatio = uint16(MAX_BPS);

    // Defaults loss limit to 0.
    uint16 private _lossLimitRatio;

    constructor(
        address _asset,
        string memory _name
    ) BaseStrategy(_asset, _name) {}

    /**
     * @notice Returns the current profit limit ratio.
     * @dev Use a getter function to keep the variable private.
     * @return . The current profit limit ratio.
     */
    function profitLimitRatio() public view returns (uint256) {
        return _profitLimitRatio;
    }

    /**
     * @notice Returns the current loss limit ratio.
     * @dev Use a getter function to keep the variable private.
     * @return . The current loss limit ratio.
     */
    function lossLimitRatio() public view returns (uint256) {
        return _lossLimitRatio;
    }

    /**
     * @notice Set the `profitLimitRatio`.
     * @dev Denominated in basis points. I.E. 1_000 == 10%.
     * @param _newProfitLimitRatio The mew profit limit ratio.
     */
    function setProfitLimitRatio(
        uint256 _newProfitLimitRatio
    ) external onlyManagement {
        _setProfitLimitRatio(_newProfitLimitRatio);
    }

    /**
     * @dev Internally set the profit limit ratio. Denominated
     * in basis points. I.E. 1_000 == 10%.
     * @param _newProfitLimitRatio The mew profit limit ratio.
     */
    function _setProfitLimitRatio(uint256 _newProfitLimitRatio) internal {
        require(_newProfitLimitRatio > 0, "!zero profit");
        require(_newProfitLimitRatio <= type(uint16).max, "!too high");
        _profitLimitRatio = uint16(_newProfitLimitRatio);
    }

    /**
     * @notice Set the `lossLimitRatio`.
     * @dev Denominated in basis points. I.E. 1_000 == 10%.
     * @param _newLossLimitRatio The new loss limit ratio.
     */
    function setLossLimitRatio(
        uint256 _newLossLimitRatio
    ) external onlyManagement {
        _setLossLimitRatio(_newLossLimitRatio);
    }

    /**
     * @dev Internally set the loss limit ratio. Denominated
     * in basis points. I.E. 1_000 == 10%.
     * @param _newLossLimitRatio The new loss limit ratio.
     */
    function _setLossLimitRatio(uint256 _newLossLimitRatio) internal {
        require(_newLossLimitRatio < MAX_BPS, "!loss limit");
        _lossLimitRatio = uint16(_newLossLimitRatio);
    }

    /**
     * @notice Turns the healthcheck on and off.
     * @dev If turned off the next report will auto turn it back on.
     * @param _doHealthCheck Bool if healthCheck should be done.
     */
    function setDoHealthCheck(bool _doHealthCheck) public onlyManagement {
        doHealthCheck = _doHealthCheck;
    }

    /**
     * @notice OVerrides the default {harvestAndReport} to include a healthcheck.
     * @return _totalAssets New totalAssets post report.
     */
    function harvestAndReport()
        external
        override
        onlySelf
        returns (uint256 _totalAssets)
    {
        // Let the strategy report.
        _totalAssets = _harvestAndReport();

        // Run the healthcheck on the amount returned.
        _executeHealthCheck(_totalAssets);
    }

    /**
     * @dev To be called during a report to make sure the profit
     * or loss being recorded is within the acceptable bound.
     *
     * @param _newTotalAssets The amount that will be reported.
     */
    function _executeHealthCheck(uint256 _newTotalAssets) internal virtual {
        if (!doHealthCheck) {
            doHealthCheck = true;
            return;
        }

        // Get the current total assets from the implementation.
        uint256 currentTotalAssets = TokenizedStrategy.totalAssets();

        if (_newTotalAssets > currentTotalAssets) {
            require(
                ((_newTotalAssets - currentTotalAssets) <=
                    (currentTotalAssets * uint256(_profitLimitRatio)) /
                        MAX_BPS),
                "healthCheck"
            );
        } else if (currentTotalAssets > _newTotalAssets) {
            require(
                (currentTotalAssets - _newTotalAssets <=
                    ((currentTotalAssets * uint256(_lossLimitRatio)) /
                        MAX_BPS)),
                "healthCheck"
            );
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.3) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";
import "../extensions/IERC20Permit.sol";
import "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    /**
     * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    /**
     * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
     * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
     */
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    /**
     * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 oldAllowance = token.allowance(address(this), spender);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance + value));
    }

    /**
     * @dev Decrease the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance - value));
        }
    }

    /**
     * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval
     * to be set to zero before setting it to a non-zero value, such as USDT.
     */
    function forceApprove(IERC20 token, address spender, uint256 value) internal {
        bytes memory approvalCall = abi.encodeWithSelector(token.approve.selector, spender, value);

        if (!_callOptionalReturnBool(token, approvalCall)) {
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, 0));
            _callOptionalReturn(token, approvalCall);
        }
    }

    /**
     * @dev Use a ERC-2612 signature to set the `owner` approval toward `spender` on `token`.
     * Revert on invalid signature.
     */
    function safePermit(
        IERC20Permit token,
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        uint256 nonceBefore = token.nonces(owner);
        token.permit(owner, spender, value, deadline, v, r, s);
        uint256 nonceAfter = token.nonces(owner);
        require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        require(returndata.length == 0 || abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     *
     * This is a variant of {_callOptionalReturn} that silents catches all reverts and returns a bool instead.
     */
    function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We cannot use {Address-functionCall} here since this should return false
        // and not revert is the subcall reverts.

        (bool success, bytes memory returndata) = address(token).call(data);
        return
            success && (returndata.length == 0 || abi.decode(returndata, (bool))) && Address.isContract(address(token));
    }
}

// SPDX-License-Identifier: AGPL-3.0
pragma solidity >=0.8.18;

import {ERC20} from "@openzeppelin/contracts/token/ERC20/ERC20.sol";
import {SafeERC20} from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";

import {ISwapRouter} from "../interfaces/Uniswap/V3/ISwapRouter.sol";

/**
 *   @title UniswapV3Swapper
 *   @author Yearn.finance
 *   @dev This is a simple contract that can be inherited by any tokenized
 *   strategy that would like to use Uniswap V3 for swaps. It hold all needed
 *   logic to perform both exact input and exact output swaps.
 *
 *   The global address variables default to the ETH mainnet addresses but
 *   remain settable by the inheriting contract to allow for customization
 *   based on needs or chain its used on.
 *
 *   The only variables that are required to be set are the specific fees
 *   for each token pair. The inheriting contract can use the {_setUniFees}
 *   function to easily set this for any token pairs needed.
 */
contract UniswapV3Swapper {
    using SafeERC20 for ERC20;

    // Optional Variable to be set to not sell dust.
    uint256 public minAmountToSell;
    // Defaults to WETH on mainnet.
    address public base = 0xC02aaA39b223FE8D0A0e5C4F27eAD9083C756Cc2;

    // Defaults to Uniswap V3 router on mainnet.
    address public router = 0xE592427A0AEce92De3Edee1F18E0157C05861564;

    // Fees for the Uni V3 pools. Each fee should get set each way in
    // the mapping so no matter the direction the correct fee will get
    // returned for any two tokens.
    mapping(address => mapping(address => uint24)) public uniFees;

    /**
     * @dev All fess will default to 0 on creation. A strategist will need
     * To set the mapping for the tokens expected to swap. This function
     * is to help set the mapping. It can be called internally during
     * initialization, through permissioned functions etc.
     */
    function _setUniFees(
        address _token0,
        address _token1,
        uint24 _fee
    ) internal virtual {
        uniFees[_token0][_token1] = _fee;
        uniFees[_token1][_token0] = _fee;
    }

    /**
     * @dev Used to swap a specific amount of `_from` to `_to`.
     * This will check and handle all allowances as well as not swapping
     * unless `_amountIn` is greater than the set `_minAmountOut`
     *
     * If one of the tokens matches with the `base` token it will do only
     * one jump, otherwise will do two jumps.
     *
     * The corresponding uniFees for each token pair will need to be set
     * other wise this function will revert.
     *
     * @param _from The token we are swapping from.
     * @param _to The token we are swapping to.
     * @param _amountIn The amount of `_from` we will swap.
     * @param _minAmountOut The min of `_to` to get out.
     * @return _amountOut The actual amount of `_to` that was swapped to
     */
    function _swapFrom(
        address _from,
        address _to,
        uint256 _amountIn,
        uint256 _minAmountOut
    ) internal virtual returns (uint256 _amountOut) {
        if (_amountIn != 0 && _amountIn >= minAmountToSell) {
            _checkAllowance(router, _from, _amountIn);
            if (_from == base || _to == base) {
                ISwapRouter.ExactInputSingleParams memory params = ISwapRouter
                    .ExactInputSingleParams(
                        _from, // tokenIn
                        _to, // tokenOut
                        uniFees[_from][_to], // from-to fee
                        address(this), // recipient
                        block.timestamp, // deadline
                        _amountIn, // amountIn
                        _minAmountOut, // amountOut
                        0 // sqrtPriceLimitX96
                    );

                _amountOut = ISwapRouter(router).exactInputSingle(params);
            } else {
                bytes memory path = abi.encodePacked(
                    _from, // tokenIn
                    uniFees[_from][base], // from-base fee
                    base, // base token
                    uniFees[base][_to], // base-to fee
                    _to // tokenOut
                );

                _amountOut = ISwapRouter(router).exactInput(
                    ISwapRouter.ExactInputParams(
                        path,
                        address(this),
                        block.timestamp,
                        _amountIn,
                        _minAmountOut
                    )
                );
            }
        }
    }

    /**
     * @dev Used to swap a specific amount of `_to` from `_from` unless
     * it takes more than `_maxAmountFrom`.
     *
     * This will check and handle all allowances as well as not swapping
     * unless `_maxAmountFrom` is greater than the set `minAmountToSell`
     *
     * If one of the tokens matches with the `base` token it will do only
     * one jump, otherwise will do two jumps.
     *
     * The corresponding uniFees for each token pair will need to be set
     * other wise this function will revert.
     *
     * @param _from The token we are swapping from.
     * @param _to The token we are swapping to.
     * @param _amountTo The amount of `_to` we need out.
     * @param _maxAmountFrom The max of `_from` we will swap.
     * @return _amountIn The actual amount of `_from` swapped.
     */
    function _swapTo(
        address _from,
        address _to,
        uint256 _amountTo,
        uint256 _maxAmountFrom
    ) internal virtual returns (uint256 _amountIn) {
        if (_maxAmountFrom != 0 && _maxAmountFrom >= minAmountToSell) {
            _checkAllowance(router, _from, _maxAmountFrom);
            if (_from == base || _to == base) {
                ISwapRouter.ExactOutputSingleParams memory params = ISwapRouter
                    .ExactOutputSingleParams(
                        _from, // tokenIn
                        _to, // tokenOut
                        uniFees[_from][_to], // from-to fee
                        address(this), // recipient
                        block.timestamp, // deadline
                        _amountTo, // amountOut
                        _maxAmountFrom, // maxAmountIn
                        0 // sqrtPriceLimitX96
                    );

                _amountIn = ISwapRouter(router).exactOutputSingle(params);
            } else {
                bytes memory path = abi.encodePacked(
                    _to,
                    uniFees[base][_to], // base-to fee
                    base,
                    uniFees[_from][base], // from-base fee
                    _from
                );

                _amountIn = ISwapRouter(router).exactOutput(
                    ISwapRouter.ExactOutputParams(
                        path,
                        address(this),
                        block.timestamp,
                        _amountTo, // How much we want out
                        _maxAmountFrom
                    )
                );
            }
        }
    }

    /**
     * @dev Internal safe function to make sure the contract you want to
     * interact with has enough allowance to pull the desired tokens.
     *
     * @param _contract The address of the contract that will move the token.
     * @param _token The ERC-20 token that will be getting spent.
     * @param _amount The amount of `_token` to be spent.
     */
    function _checkAllowance(
        address _contract,
        address _token,
        uint256 _amount
    ) internal virtual {
        if (ERC20(_token).allowance(address(this), _contract) < _amount) {
            ERC20(_token).forceApprove(_contract, 0);
            ERC20(_token).forceApprove(_contract, _amount);
        }
    }
}

// SPDX-License-Identifier: AGPL-3.0
pragma solidity >=0.8.18;

import {Maths} from "../libraries/Maths.sol";
import {ITaker} from "../interfaces/ITaker.sol";
import {GPv2Order} from "../libraries/GPv2Order.sol";
import {Governance2Step} from "../utils/Governance2Step.sol";
import {ERC20} from "@openzeppelin/contracts/token/ERC20/ERC20.sol";
import {SafeERC20} from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import {ReentrancyGuard} from "@openzeppelin/contracts/security/ReentrancyGuard.sol";

interface ICowSettlement {
    function domainSeparator() external view returns (bytes32);
}

/**
 *   @title Auction
 *   @author yearn.fi
 *   @notice General use dutch auction contract for token sales.
 */
contract Auction is Governance2Step, ReentrancyGuard {
    using GPv2Order for GPv2Order.Data;
    using SafeERC20 for ERC20;

    /// @notice Emitted when a new auction is enabled
    event AuctionEnabled(address indexed from, address indexed to);

    /// @notice Emitted when an auction is disabled.
    event AuctionDisabled(address indexed from, address indexed to);

    /// @notice Emitted when auction has been kicked.
    event AuctionKicked(address indexed from, uint256 available);

    /// @notice Emitted when the starting price is updated.
    event UpdatedStartingPrice(uint256 startingPrice);

    /// @dev Store address and scaler in one slot.
    struct TokenInfo {
        address tokenAddress;
        uint96 scaler;
    }

    /// @notice Store all the auction specific information.
    struct AuctionInfo {
        uint64 kicked;
        uint64 scaler;
        uint128 initialAvailable;
    }

    uint256 internal constant WAD = 1e18;

    /// @notice Used for the price decay.
    uint256 internal constant MINUTE_HALF_LIFE =
        0.988514020352896135_356867505 * 1e27; // 0.5^(1/60)

    address internal constant COW_SETTLEMENT =
        0x9008D19f58AAbD9eD0D60971565AA8510560ab41;

    address internal constant VAULT_RELAYER =
        0xC92E8bdf79f0507f65a392b0ab4667716BFE0110;

    bytes32 internal immutable COW_DOMAIN_SEPARATOR;

    /// @notice Struct to hold the info for `want`.
    TokenInfo internal wantInfo;

    /// @notice The address that will receive the funds in the auction.
    address public receiver;

    /// @notice The amount to start the auction at.
    uint256 public startingPrice;

    /// @notice The time that each auction lasts.
    uint256 public auctionLength;

    /// @notice Mapping from `from` token to its struct.
    mapping(address => AuctionInfo) public auctions;

    /// @notice Array of all the enabled auction for this contract.
    address[] public enabledAuctions;

    constructor() Governance2Step(msg.sender) {
        bytes32 domainSeparator;
        if (COW_SETTLEMENT.code.length > 0) {
            domainSeparator = ICowSettlement(COW_SETTLEMENT).domainSeparator();
        } else {
            domainSeparator = bytes32(0);
        }

        COW_DOMAIN_SEPARATOR = domainSeparator;
    }

    /**
     * @notice Initializes the Auction contract with initial parameters.
     * @param _want Address this auction is selling to.
     * @param _receiver Address that will receive the funds from the auction.
     * @param _governance Address of the contract governance.
     * @param _auctionLength Duration of each auction in seconds.
     * @param _startingPrice Starting price for each auction.
     */
    function initialize(
        address _want,
        address _receiver,
        address _governance,
        uint256 _auctionLength,
        uint256 _startingPrice
    ) public virtual {
        require(auctionLength == 0, "initialized");
        require(_want != address(0), "ZERO ADDRESS");
        require(_auctionLength != 0, "length");
        require(_startingPrice != 0, "starting price");
        require(_receiver != address(0), "receiver");
        // Cannot have more than 18 decimals.
        uint256 decimals = ERC20(_want).decimals();
        require(decimals <= 18, "unsupported decimals");

        // Set variables
        wantInfo = TokenInfo({
            tokenAddress: _want,
            scaler: uint96(WAD / 10 ** decimals)
        });

        receiver = _receiver;
        governance = _governance;
        auctionLength = _auctionLength;
        startingPrice = _startingPrice;
        emit UpdatedStartingPrice(_startingPrice);
    }

    /*//////////////////////////////////////////////////////////////
                         VIEW METHODS
    //////////////////////////////////////////////////////////////*/

    /**
     * @notice Get the address of this auctions want token.
     * @return . The want token.
     */
    function want() public view virtual returns (address) {
        return wantInfo.tokenAddress;
    }

    /**
     * @notice Get the available amount for the auction.
     * @param _from The address of the token to be auctioned.
     * @return . The available amount for the auction.
     */
    function available(address _from) public view virtual returns (uint256) {
        if (!isActive(_from)) return 0;

        return
            Maths.min(
                auctions[_from].initialAvailable,
                ERC20(_from).balanceOf(address(this))
            );
    }

    /**
     * @notice Get the kicked timestamp for the auction.
     * @param _from The address of the token to be auctioned.
     * @return . The kicked timestamp for the auction.
     */
    function kicked(address _from) external view virtual returns (uint256) {
        return auctions[_from].kicked;
    }

    /**
     * @notice Check if the auction is active.
     * @param _from The address of the token to be auctioned.
     * @return . Whether the auction is active.
     */
    function isActive(address _from) public view virtual returns (bool) {
        return auctions[_from].kicked + auctionLength >= block.timestamp;
    }

    /**
     * @notice Get all the enabled auctions.
     */
    function getAllEnabledAuctions()
        external
        view
        virtual
        returns (address[] memory)
    {
        return enabledAuctions;
    }

    /**
     * @notice Get the pending amount available for the next auction.
     * @dev Defaults to the auctions balance of the from token if no hook.
     * @param _from The address of the token to be auctioned.
     * @return uint256 The amount that can be kicked into the auction.
     */
    function kickable(address _from) external view virtual returns (uint256) {
        // If not enough time has passed then `kickable` is 0.
        if (isActive(_from)) return 0;

        // Use the full balance of this contract.
        return ERC20(_from).balanceOf(address(this));
    }

    /**
     * @notice Gets the amount of `want` needed to buy the available amount of `from`.
     * @param _from The address of the token to be auctioned.
     * @return . The amount of `want` needed to fulfill the take amount.
     */
    function getAmountNeeded(
        address _from
    ) external view virtual returns (uint256) {
        return
            _getAmountNeeded(
                auctions[_from],
                available(_from),
                block.timestamp
            );
    }

    /**
     * @notice Gets the amount of `want` needed to buy a specific amount of `from`.
     * @param _from The address of the token to be auctioned.
     * @param _amountToTake The amount of `from` to take in the auction.
     * @return . The amount of `want` needed to fulfill the take amount.
     */
    function getAmountNeeded(
        address _from,
        uint256 _amountToTake
    ) external view virtual returns (uint256) {
        return
            _getAmountNeeded(auctions[_from], _amountToTake, block.timestamp);
    }

    /**
     * @notice Gets the amount of `want` needed to buy a specific amount of `from` at a specific timestamp.
     * @param _from The address of the token to be auctioned.
     * @param _amountToTake The amount `from` to take in the auction.
     * @param _timestamp The specific timestamp for calculating the amount needed.
     * @return . The amount of `want` needed to fulfill the take amount.
     */
    function getAmountNeeded(
        address _from,
        uint256 _amountToTake,
        uint256 _timestamp
    ) external view virtual returns (uint256) {
        return _getAmountNeeded(auctions[_from], _amountToTake, _timestamp);
    }

    /**
     * @dev Return the amount of `want` needed to buy `_amountToTake`.
     */
    function _getAmountNeeded(
        AuctionInfo memory _auction,
        uint256 _amountToTake,
        uint256 _timestamp
    ) internal view virtual returns (uint256) {
        return
            // Scale _amountToTake to 1e18
            (_amountToTake *
                _auction.scaler *
                // Price is always 1e18
                _price(
                    _auction.kicked,
                    _auction.initialAvailable * _auction.scaler,
                    _timestamp
                )) /
            1e18 /
            // Scale back down to want.
            wantInfo.scaler;
    }

    /**
     * @notice Gets the price of the auction at the current timestamp.
     * @param _from The address of the token to be auctioned.
     * @return . The price of the auction.
     */
    function price(address _from) external view virtual returns (uint256) {
        return price(_from, block.timestamp);
    }

    /**
     * @notice Gets the price of the auction at a specific timestamp.
     * @param _from The address of the token to be auctioned.
     * @param _timestamp The specific timestamp for calculating the price.
     * @return . The price of the auction.
     */
    function price(
        address _from,
        uint256 _timestamp
    ) public view virtual returns (uint256) {
        // Get unscaled price and scale it down.
        return
            _price(
                auctions[_from].kicked,
                auctions[_from].initialAvailable * auctions[_from].scaler,
                _timestamp
            ) / wantInfo.scaler;
    }

    /**
     * @dev Internal function to calculate the scaled price based on auction parameters.
     * @param _kicked The timestamp the auction was kicked.
     * @param _available The initial available amount scaled 1e18.
     * @param _timestamp The specific timestamp for calculating the price.
     * @return . The calculated price scaled to 1e18.
     */
    function _price(
        uint256 _kicked,
        uint256 _available,
        uint256 _timestamp
    ) internal view virtual returns (uint256) {
        if (_available == 0) return 0;

        uint256 secondsElapsed = _timestamp - _kicked;

        if (secondsElapsed > auctionLength) return 0;

        // Exponential step decay from https://github.com/ajna-finance/ajna-core/blob/master/src/libraries/helpers/PoolHelper.sol
        uint256 hoursComponent = 1e27 >> (secondsElapsed / 3600);
        uint256 minutesComponent = Maths.rpow(
            MINUTE_HALF_LIFE,
            (secondsElapsed % 3600) / 60
        );
        uint256 initialPrice = Maths.wdiv(startingPrice * 1e18, _available);

        return
            (initialPrice * Maths.rmul(hoursComponent, minutesComponent)) /
            1e27;
    }

    /*//////////////////////////////////////////////////////////////
                            SETTERS
    //////////////////////////////////////////////////////////////*/

    /**
     * @notice Enables a new auction.
     * @param _from The address of the token to be auctioned.
     */
    function enable(address _from) external virtual onlyGovernance {
        address _want = want();
        require(_from != address(0) && _from != _want, "ZERO ADDRESS");
        require(auctions[_from].scaler == 0, "already enabled");

        // Cannot have more than 18 decimals.
        uint256 decimals = ERC20(_from).decimals();
        require(decimals <= 18, "unsupported decimals");

        // Store all needed info.
        auctions[_from].scaler = uint64(WAD / 10 ** decimals);

        ERC20(_from).forceApprove(VAULT_RELAYER, type(uint256).max);

        // Add to the array.
        enabledAuctions.push(_from);

        emit AuctionEnabled(_from, _want);
    }

    /**
     * @notice Disables an existing auction.
     * @dev Only callable by governance.
     * @param _from The address of the token being sold.
     */
    function disable(address _from) external virtual {
        disable(_from, 0);
    }

    /**
     * @notice Disables an existing auction.
     * @dev Only callable by governance.
     * @param _from The address of the token being sold.
     * @param _index The index the auctionId is at in the array.
     */
    function disable(
        address _from,
        uint256 _index
    ) public virtual onlyGovernance {
        // Make sure the auction was enabled.
        require(auctions[_from].scaler != 0, "not enabled");

        // Remove the struct.
        delete auctions[_from];

        ERC20(_from).forceApprove(VAULT_RELAYER, 0);

        // Remove the auction ID from the array.
        address[] memory _enabledAuctions = enabledAuctions;
        if (_enabledAuctions[_index] != _from) {
            // If the _index given is not the id find it.
            for (uint256 i = 0; i < _enabledAuctions.length; ++i) {
                if (_enabledAuctions[i] == _from) {
                    _index = i;
                    break;
                }
            }
        }

        // Move the id to the last spot if not there.
        if (_index < _enabledAuctions.length - 1) {
            _enabledAuctions[_index] = _enabledAuctions[
                _enabledAuctions.length - 1
            ];
            // Update the array.
            enabledAuctions = _enabledAuctions;
        }

        // Pop the id off the array.
        enabledAuctions.pop();

        emit AuctionDisabled(_from, want());
    }

    /**
     * @notice Sets the starting price for the auction.
     * @param _startingPrice The new starting price for the auction.
     */
    function setStartingPrice(
        uint256 _startingPrice
    ) external virtual onlyGovernance {
        require(_startingPrice != 0, "starting price");

        // Don't change the price when an auction is active.
        address[] memory _enabledAuctions = enabledAuctions;
        for (uint256 i = 0; i < _enabledAuctions.length; ++i) {
            require(!isActive(_enabledAuctions[i]), "active auction");
        }

        startingPrice = _startingPrice;

        emit UpdatedStartingPrice(_startingPrice);
    }

    /*//////////////////////////////////////////////////////////////
                      PARTICIPATE IN AUCTION
    //////////////////////////////////////////////////////////////*/

    /**
     * @notice Kicks off an auction, updating its status and making funds available for bidding.
     * @param _from The address of the token to be auctioned.
     * @return _available The available amount for bidding on in the auction.
     */
    function kick(
        address _from
    ) external virtual nonReentrant returns (uint256 _available) {
        require(auctions[_from].scaler != 0, "not enabled");
        require(
            block.timestamp > auctions[_from].kicked + auctionLength,
            "too soon"
        );

        // Just use current balance.
        _available = ERC20(_from).balanceOf(address(this));

        require(_available != 0, "nothing to kick");

        // Update the auctions status.
        auctions[_from].kicked = uint64(block.timestamp);
        auctions[_from].initialAvailable = uint128(_available);

        emit AuctionKicked(_from, _available);
    }

    /**
     * @notice Take the token being sold in a live auction.
     * @dev Defaults to taking the full amount and sending to the msg sender.
     * @param _from The address of the token to be auctioned.
     * @return . The amount of fromToken taken in the auction.
     */
    function take(address _from) external virtual returns (uint256) {
        return _take(_from, type(uint256).max, msg.sender, new bytes(0));
    }

    /**
     * @notice Take the token being sold in a live auction with a specified maximum amount.
     * @dev Will send the funds to the msg sender.
     * @param _from The address of the token to be auctioned.
     * @param _maxAmount The maximum amount of fromToken to take in the auction.
     * @return . The amount of fromToken taken in the auction.
     */
    function take(
        address _from,
        uint256 _maxAmount
    ) external virtual returns (uint256) {
        return _take(_from, _maxAmount, msg.sender, new bytes(0));
    }

    /**
     * @notice Take the token being sold in a live auction.
     * @param _from The address of the token to be auctioned.
     * @param _maxAmount The maximum amount of fromToken to take in the auction.
     * @param _receiver The address that will receive the fromToken.
     * @return _amountTaken The amount of fromToken taken in the auction.
     */
    function take(
        address _from,
        uint256 _maxAmount,
        address _receiver
    ) external virtual returns (uint256) {
        return _take(_from, _maxAmount, _receiver, new bytes(0));
    }

    /**
     * @notice Take the token being sold in a live auction.
     * @param _from The address of the token to be auctioned.
     * @param _maxAmount The maximum amount of fromToken to take in the auction.
     * @param _receiver The address that will receive the fromToken.
     * @param _data The data signify the callback should be used and sent with it.
     * @return _amountTaken The amount of fromToken taken in the auction.
     */
    function take(
        address _from,
        uint256 _maxAmount,
        address _receiver,
        bytes calldata _data
    ) external virtual returns (uint256) {
        return _take(_from, _maxAmount, _receiver, _data);
    }

    /// @dev Implements the take of the auction.
    function _take(
        address _from,
        uint256 _maxAmount,
        address _receiver,
        bytes memory _data
    ) internal virtual nonReentrant returns (uint256 _amountTaken) {
        AuctionInfo memory auction = auctions[_from];
        // Make sure the auction is active.
        require(
            auction.kicked + auctionLength >= block.timestamp,
            "not kicked"
        );

        // Max amount that can be taken.
        uint256 _available = available(_from);
        _amountTaken = _available > _maxAmount ? _maxAmount : _available;

        // Get the amount needed
        uint256 needed = _getAmountNeeded(
            auction,
            _amountTaken,
            block.timestamp
        );

        require(needed != 0, "zero needed");

        // Send `from`.
        ERC20(_from).safeTransfer(_receiver, _amountTaken);

        // If the caller has specified data.
        if (_data.length != 0) {
            // Do the callback.
            ITaker(_receiver).auctionTakeCallback(
                _from,
                msg.sender,
                _amountTaken,
                needed,
                _data
            );
        }

        // Cache the want address.
        address _want = want();

        // Pull `want`.
        ERC20(_want).safeTransferFrom(msg.sender, receiver, needed);
    }

    /// @dev Validates a COW order signature.
    function isValidSignature(
        bytes32 _hash,
        bytes calldata signature
    ) external view returns (bytes4) {
        // Make sure `_take` has not already been entered.
        require(!_reentrancyGuardEntered(), "ReentrancyGuard: reentrant call");

        // Decode the signature to get the order.
        GPv2Order.Data memory order = abi.decode(signature, (GPv2Order.Data));

        AuctionInfo memory auction = auctions[address(order.sellToken)];

        // Get the current amount needed for the auction.
        uint256 paymentAmount = _getAmountNeeded(
            auction,
            order.sellAmount,
            block.timestamp
        );

        // Verify the order details.
        require(_hash == order.hash(COW_DOMAIN_SEPARATOR), "bad order");
        require(paymentAmount != 0, "zero amount");
        require(available(address(order.sellToken)) != 0, "zero available");
        require(order.feeAmount == 0, "fee");
        require(order.partiallyFillable, "partial fill");
        require(order.validTo < auction.kicked + auctionLength, "expired");
        require(order.appData == bytes32(0), "app data");
        require(order.buyAmount >= paymentAmount, "bad price");
        require(address(order.buyToken) == want(), "bad token");
        require(order.receiver == receiver, "bad receiver");
        require(order.sellAmount <= auction.initialAvailable, "bad amount");

        // If all checks pass, return the magic value
        return this.isValidSignature.selector;
    }

    /**
     * @notice Allows the auction to be stopped if the full amount is taken.
     * @param _from The address of the token to be auctioned.
     */
    function settle(address _from) external virtual {
        require(isActive(_from), "!active");
        require(ERC20(_from).balanceOf(address(this)) == 0, "!empty");

        auctions[_from].kicked = uint64(0);
    }

    function sweep(address _token) external virtual onlyGovernance {
        ERC20(_token).safeTransfer(
            msg.sender,
            ERC20(_token).balanceOf(address(this))
        );
    }
}

// SPDX-License-Identifier: AGPL-3.0
pragma solidity 0.8.28;

interface IStaking {
    function stakingToken() external view returns (address);

    function rewardsToken() external view returns (address);

    function paused() external view returns (bool);

    function balanceOf(address) external view returns (uint256);

    function earned(address) external view returns (uint256);

    function totalSupply() external view returns (uint256);

    function rewardRate() external view returns (uint256);

    function stake(uint256 _amount, uint16 _referral) external;

    function withdraw(uint256 _amount) external;

    function setPaused(bool _paused) external;

    function getReward() external;
}

// SPDX-License-Identifier: AGPL-3.0
pragma solidity 0.8.28;

interface IPsmWrapper {
    function sellGem(address, uint256) external returns (uint256);

    function usds() external view returns (address);

    function gem() external view returns (address);
}

// SPDX-License-Identifier: AGPL-3.0
pragma solidity >=0.8.18;

import {ERC20} from "@openzeppelin/contracts/token/ERC20/ERC20.sol";

// TokenizedStrategy interface used for internal view delegateCalls.
import {ITokenizedStrategy} from "./interfaces/ITokenizedStrategy.sol";

/**
 * @title YearnV3 Base Strategy
 * @author yearn.finance
 * @notice
 *  BaseStrategy implements all of the required functionality to
 *  seamlessly integrate with the `TokenizedStrategy` implementation contract
 *  allowing anyone to easily build a fully permissionless ERC-4626 compliant
 *  Vault by inheriting this contract and overriding three simple functions.

 *  It utilizes an immutable proxy pattern that allows the BaseStrategy
 *  to remain simple and small. All standard logic is held within the
 *  `TokenizedStrategy` and is reused over any n strategies all using the
 *  `fallback` function to delegatecall the implementation so that strategists
 *  can only be concerned with writing their strategy specific code.
 *
 *  This contract should be inherited and the three main abstract methods
 *  `_deployFunds`, `_freeFunds` and `_harvestAndReport` implemented to adapt
 *  the Strategy to the particular needs it has to generate yield. There are
 *  other optional methods that can be implemented to further customize
 *  the strategy if desired.
 *
 *  All default storage for the strategy is controlled and updated by the
 *  `TokenizedStrategy`. The implementation holds a storage struct that
 *  contains all needed global variables in a manual storage slot. This
 *  means strategists can feel free to implement their own custom storage
 *  variables as they need with no concern of collisions. All global variables
 *  can be viewed within the Strategy by a simple call using the
 *  `TokenizedStrategy` variable. IE: TokenizedStrategy.globalVariable();.
 */
abstract contract BaseStrategy {
    /*//////////////////////////////////////////////////////////////
                            MODIFIERS
    //////////////////////////////////////////////////////////////*/
    /**
     * @dev Used on TokenizedStrategy callback functions to make sure it is post
     * a delegateCall from this address to the TokenizedStrategy.
     */
    modifier onlySelf() {
        _onlySelf();
        _;
    }

    /**
     * @dev Use to assure that the call is coming from the strategies management.
     */
    modifier onlyManagement() {
        TokenizedStrategy.requireManagement(msg.sender);
        _;
    }

    /**
     * @dev Use to assure that the call is coming from either the strategies
     * management or the keeper.
     */
    modifier onlyKeepers() {
        TokenizedStrategy.requireKeeperOrManagement(msg.sender);
        _;
    }

    /**
     * @dev Use to assure that the call is coming from either the strategies
     * management or the emergency admin.
     */
    modifier onlyEmergencyAuthorized() {
        TokenizedStrategy.requireEmergencyAuthorized(msg.sender);
        _;
    }

    /**
     * @dev Require that the msg.sender is this address.
     */
    function _onlySelf() internal view {
        require(msg.sender == address(this), "!self");
    }

    /*//////////////////////////////////////////////////////////////
                            CONSTANTS
    //////////////////////////////////////////////////////////////*/

    /**
     * @dev This is the address of the TokenizedStrategy implementation
     * contract that will be used by all strategies to handle the
     * accounting, logic, storage etc.
     *
     * Any external calls to the that don't hit one of the functions
     * defined in this base or the strategy will end up being forwarded
     * through the fallback function, which will delegateCall this address.
     *
     * This address should be the same for every strategy, never be adjusted
     * and always be checked before any integration with the Strategy.
     */
    address public constant tokenizedStrategyAddress =
        0xD377919FA87120584B21279a491F82D5265A139c;

    /*//////////////////////////////////////////////////////////////
                            IMMUTABLES
    //////////////////////////////////////////////////////////////*/

    /**
     * @dev Underlying asset the Strategy is earning yield on.
     * Stored here for cheap retrievals within the strategy.
     */
    ERC20 internal immutable asset;

    /**
     * @dev This variable is set to address(this) during initialization of each strategy.
     *
     * This can be used to retrieve storage data within the strategy
     * contract as if it were a linked library.
     *
     *       i.e. uint256 totalAssets = TokenizedStrategy.totalAssets()
     *
     * Using address(this) will mean any calls using this variable will lead
     * to a call to itself. Which will hit the fallback function and
     * delegateCall that to the actual TokenizedStrategy.
     */
    ITokenizedStrategy internal immutable TokenizedStrategy;

    /**
     * @notice Used to initialize the strategy on deployment.
     *
     * This will set the `TokenizedStrategy` variable for easy
     * internal view calls to the implementation. As well as
     * initializing the default storage variables based on the
     * parameters and using the deployer for the permissioned roles.
     *
     * @param _asset Address of the underlying asset.
     * @param _name Name the strategy will use.
     */
    constructor(address _asset, string memory _name) {
        asset = ERC20(_asset);

        // Set instance of the implementation for internal use.
        TokenizedStrategy = ITokenizedStrategy(address(this));

        // Initialize the strategy's storage variables.
        _delegateCall(
            abi.encodeCall(
                ITokenizedStrategy.initialize,
                (_asset, _name, msg.sender, msg.sender, msg.sender)
            )
        );

        // Store the tokenizedStrategyAddress at the standard implementation
        // address storage slot so etherscan picks up the interface. This gets
        // stored on initialization and never updated.
        assembly {
            sstore(
                // keccak256('eip1967.proxy.implementation' - 1)
                0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc,
                tokenizedStrategyAddress
            )
        }
    }

    /*//////////////////////////////////////////////////////////////
                NEEDED TO BE OVERRIDDEN BY STRATEGIST
    //////////////////////////////////////////////////////////////*/

    /**
     * @dev Can deploy up to '_amount' of 'asset' in the yield source.
     *
     * This function is called at the end of a {deposit} or {mint}
     * call. Meaning that unless a whitelist is implemented it will
     * be entirely permissionless and thus can be sandwiched or otherwise
     * manipulated.
     *
     * @param _amount The amount of 'asset' that the strategy can attempt
     * to deposit in the yield source.
     */
    function _deployFunds(uint256 _amount) internal virtual;

    /**
     * @dev Should attempt to free the '_amount' of 'asset'.
     *
     * NOTE: The amount of 'asset' that is already loose has already
     * been accounted for.
     *
     * This function is called during {withdraw} and {redeem} calls.
     * Meaning that unless a whitelist is implemented it will be
     * entirely permissionless and thus can be sandwiched or otherwise
     * manipulated.
     *
     * Should not rely on asset.balanceOf(address(this)) calls other than
     * for diff accounting purposes.
     *
     * Any difference between `_amount` and what is actually freed will be
     * counted as a loss and passed on to the withdrawer. This means
     * care should be taken in times of illiquidity. It may be better to revert
     * if withdraws are simply illiquid so not to realize incorrect losses.
     *
     * @param _amount, The amount of 'asset' to be freed.
     */
    function _freeFunds(uint256 _amount) internal virtual;

    /**
     * @dev Internal function to harvest all rewards, redeploy any idle
     * funds and return an accurate accounting of all funds currently
     * held by the Strategy.
     *
     * This should do any needed harvesting, rewards selling, accrual,
     * redepositing etc. to get the most accurate view of current assets.
     *
     * NOTE: All applicable assets including loose assets should be
     * accounted for in this function.
     *
     * Care should be taken when relying on oracles or swap values rather
     * than actual amounts as all Strategy profit/loss accounting will
     * be done based on this returned value.
     *
     * This can still be called post a shutdown, a strategist can check
     * `TokenizedStrategy.isShutdown()` to decide if funds should be
     * redeployed or simply realize any profits/losses.
     *
     * @return _totalAssets A trusted and accurate account for the total
     * amount of 'asset' the strategy currently holds including idle funds.
     */
    function _harvestAndReport()
        internal
        virtual
        returns (uint256 _totalAssets);

    /*//////////////////////////////////////////////////////////////
                    OPTIONAL TO OVERRIDE BY STRATEGIST
    //////////////////////////////////////////////////////////////*/

    /**
     * @dev Optional function for strategist to override that can
     *  be called in between reports.
     *
     * If '_tend' is used tendTrigger() will also need to be overridden.
     *
     * This call can only be called by a permissioned role so may be
     * through protected relays.
     *
     * This can be used to harvest and compound rewards, deposit idle funds,
     * perform needed position maintenance or anything else that doesn't need
     * a full report for.
     *
     *   EX: A strategy that can not deposit funds without getting
     *       sandwiched can use the tend when a certain threshold
     *       of idle to totalAssets has been reached.
     *
     * This will have no effect on PPS of the strategy till report() is called.
     *
     * @param _totalIdle The current amount of idle funds that are available to deploy.
     */
    function _tend(uint256 _totalIdle) internal virtual {}

    /**
     * @dev Optional trigger to override if tend() will be used by the strategy.
     * This must be implemented if the strategy hopes to invoke _tend().
     *
     * @return . Should return true if tend() should be called by keeper or false if not.
     */
    function _tendTrigger() internal view virtual returns (bool) {
        return false;
    }

    /**
     * @notice Returns if tend() should be called by a keeper.
     *
     * @return . Should return true if tend() should be called by keeper or false if not.
     * @return . Calldata for the tend call.
     */
    function tendTrigger() external view virtual returns (bool, bytes memory) {
        return (
            // Return the status of the tend trigger.
            _tendTrigger(),
            // And the needed calldata either way.
            abi.encodeWithSelector(ITokenizedStrategy.tend.selector)
        );
    }

    /**
     * @notice Gets the max amount of `asset` that an address can deposit.
     * @dev Defaults to an unlimited amount for any address. But can
     * be overridden by strategists.
     *
     * This function will be called before any deposit or mints to enforce
     * any limits desired by the strategist. This can be used for either a
     * traditional deposit limit or for implementing a whitelist etc.
     *
     *   EX:
     *      if(isAllowed[_owner]) return super.availableDepositLimit(_owner);
     *
     * This does not need to take into account any conversion rates
     * from shares to assets. But should know that any non max uint256
     * amounts may be converted to shares. So it is recommended to keep
     * custom amounts low enough as not to cause overflow when multiplied
     * by `totalSupply`.
     *
     * @param . The address that is depositing into the strategy.
     * @return . The available amount the `_owner` can deposit in terms of `asset`
     */
    function availableDepositLimit(
        address /*_owner*/
    ) public view virtual returns (uint256) {
        return type(uint256).max;
    }

    /**
     * @notice Gets the max amount of `asset` that can be withdrawn.
     * @dev Defaults to an unlimited amount for any address. But can
     * be overridden by strategists.
     *
     * This function will be called before any withdraw or redeem to enforce
     * any limits desired by the strategist. This can be used for illiquid
     * or sandwichable strategies. It should never be lower than `totalIdle`.
     *
     *   EX:
     *       return TokenIzedStrategy.totalIdle();
     *
     * This does not need to take into account the `_owner`'s share balance
     * or conversion rates from shares to assets.
     *
     * @param . The address that is withdrawing from the strategy.
     * @return . The available amount that can be withdrawn in terms of `asset`
     */
    function availableWithdrawLimit(
        address /*_owner*/
    ) public view virtual returns (uint256) {
        return type(uint256).max;
    }

    /**
     * @dev Optional function for a strategist to override that will
     * allow management to manually withdraw deployed funds from the
     * yield source if a strategy is shutdown.
     *
     * This should attempt to free `_amount`, noting that `_amount` may
     * be more than is currently deployed.
     *
     * NOTE: This will not realize any profits or losses. A separate
     * {report} will be needed in order to record any profit/loss. If
     * a report may need to be called after a shutdown it is important
     * to check if the strategy is shutdown during {_harvestAndReport}
     * so that it does not simply re-deploy all funds that had been freed.
     *
     * EX:
     *   if(freeAsset > 0 && !TokenizedStrategy.isShutdown()) {
     *       depositFunds...
     *    }
     *
     * @param _amount The amount of asset to attempt to free.
     */
    function _emergencyWithdraw(uint256 _amount) internal virtual {}

    /*//////////////////////////////////////////////////////////////
                        TokenizedStrategy HOOKS
    //////////////////////////////////////////////////////////////*/

    /**
     * @notice Can deploy up to '_amount' of 'asset' in yield source.
     * @dev Callback for the TokenizedStrategy to call during a {deposit}
     * or {mint} to tell the strategy it can deploy funds.
     *
     * Since this can only be called after a {deposit} or {mint}
     * delegateCall to the TokenizedStrategy msg.sender == address(this).
     *
     * Unless a whitelist is implemented this will be entirely permissionless
     * and thus can be sandwiched or otherwise manipulated.
     *
     * @param _amount The amount of 'asset' that the strategy can
     * attempt to deposit in the yield source.
     */
    function deployFunds(uint256 _amount) external virtual onlySelf {
        _deployFunds(_amount);
    }

    /**
     * @notice Should attempt to free the '_amount' of 'asset'.
     * @dev Callback for the TokenizedStrategy to call during a withdraw
     * or redeem to free the needed funds to service the withdraw.
     *
     * This can only be called after a 'withdraw' or 'redeem' delegateCall
     * to the TokenizedStrategy so msg.sender == address(this).
     *
     * @param _amount The amount of 'asset' that the strategy should attempt to free up.
     */
    function freeFunds(uint256 _amount) external virtual onlySelf {
        _freeFunds(_amount);
    }

    /**
     * @notice Returns the accurate amount of all funds currently
     * held by the Strategy.
     * @dev Callback for the TokenizedStrategy to call during a report to
     * get an accurate accounting of assets the strategy controls.
     *
     * This can only be called after a report() delegateCall to the
     * TokenizedStrategy so msg.sender == address(this).
     *
     * @return . A trusted and accurate account for the total amount
     * of 'asset' the strategy currently holds including idle funds.
     */
    function harvestAndReport() external virtual onlySelf returns (uint256) {
        return _harvestAndReport();
    }

    /**
     * @notice Will call the internal '_tend' when a keeper tends the strategy.
     * @dev Callback for the TokenizedStrategy to initiate a _tend call in the strategy.
     *
     * This can only be called after a tend() delegateCall to the TokenizedStrategy
     * so msg.sender == address(this).
     *
     * We name the function `tendThis` so that `tend` calls are forwarded to
     * the TokenizedStrategy.

     * @param _totalIdle The amount of current idle funds that can be
     * deployed during the tend
     */
    function tendThis(uint256 _totalIdle) external virtual onlySelf {
        _tend(_totalIdle);
    }

    /**
     * @notice Will call the internal '_emergencyWithdraw' function.
     * @dev Callback for the TokenizedStrategy during an emergency withdraw.
     *
     * This can only be called after a emergencyWithdraw() delegateCall to
     * the TokenizedStrategy so msg.sender == address(this).
     *
     * We name the function `shutdownWithdraw` so that `emergencyWithdraw`
     * calls are forwarded to the TokenizedStrategy.
     *
     * @param _amount The amount of asset to attempt to free.
     */
    function shutdownWithdraw(uint256 _amount) external virtual onlySelf {
        _emergencyWithdraw(_amount);
    }

    /**
     * @dev Function used to delegate call the TokenizedStrategy with
     * certain `_calldata` and return any return values.
     *
     * This is used to setup the initial storage of the strategy, and
     * can be used by strategist to forward any other call to the
     * TokenizedStrategy implementation.
     *
     * @param _calldata The abi encoded calldata to use in delegatecall.
     * @return . The return value if the call was successful in bytes.
     */
    function _delegateCall(
        bytes memory _calldata
    ) internal returns (bytes memory) {
        // Delegate call the tokenized strategy with provided calldata.
        (bool success, bytes memory result) = tokenizedStrategyAddress
            .delegatecall(_calldata);

        // If the call reverted. Return the error.
        if (!success) {
            assembly {
                let ptr := mload(0x40)
                let size := returndatasize()
                returndatacopy(ptr, 0, size)
                revert(ptr, size)
            }
        }

        // Return the result.
        return result;
    }

    /**
     * @dev Execute a function on the TokenizedStrategy and return any value.
     *
     * This fallback function will be executed when any of the standard functions
     * defined in the TokenizedStrategy are called since they wont be defined in
     * this contract.
     *
     * It will delegatecall the TokenizedStrategy implementation with the exact
     * calldata and return any relevant values.
     *
     */
    fallback() external {
        // load our target address
        address _tokenizedStrategyAddress = tokenizedStrategyAddress;
        // Execute external function using delegatecall and return any value.
        assembly {
            // Copy function selector and any arguments.
            calldatacopy(0, 0, calldatasize())
            // Execute function delegatecall.
            let result := delegatecall(
                gas(),
                _tokenizedStrategyAddress,
                0,
                calldatasize(),
                0,
                0
            )
            // Get any return value
            returndatacopy(0, 0, returndatasize())
            // Return any return value or error back to the caller
            switch result
            case 0 {
                revert(0, returndatasize())
            }
            default {
                return(0, returndatasize())
            }
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 amount) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.4) (token/ERC20/extensions/IERC20Permit.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 *
 * ==== Security Considerations
 *
 * There are two important considerations concerning the use of `permit`. The first is that a valid permit signature
 * expresses an allowance, and it should not be assumed to convey additional meaning. In particular, it should not be
 * considered as an intention to spend the allowance in any specific way. The second is that because permits have
 * built-in replay protection and can be submitted by anyone, they can be frontrun. A protocol that uses permits should
 * take this into consideration and allow a `permit` call to fail. Combining these two aspects, a pattern that may be
 * generally recommended is:
 *
 * ```solidity
 * function doThingWithPermit(..., uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) public {
 *     try token.permit(msg.sender, address(this), value, deadline, v, r, s) {} catch {}
 *     doThing(..., value);
 * }
 *
 * function doThing(..., uint256 value) public {
 *     token.safeTransferFrom(msg.sender, address(this), value);
 *     ...
 * }
 * ```
 *
 * Observe that: 1) `msg.sender` is used as the owner, leaving no ambiguity as to the signer intent, and 2) the use of
 * `try/catch` allows the permit to fail and makes the code tolerant to frontrunning. (See also
 * {SafeERC20-safeTransferFrom}).
 *
 * Additionally, note that smart contract wallets (such as Argent or Safe) are not able to produce permit signatures, so
 * contracts should have entry points that don't rely on permit.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     *
     * CAUTION: See Security Considerations above.
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     *
     * Furthermore, `isContract` will also return true if the target contract within
     * the same transaction is already scheduled for destruction by `SELFDESTRUCT`,
     * which only has an effect at the end of a transaction.
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.0/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/ERC20.sol)

pragma solidity ^0.8.0;

import "./IERC20.sol";
import "./extensions/IERC20Metadata.sol";
import "../../utils/Context.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * The default value of {decimals} is 18. To change this, you should override
 * this function so it returns a different value.
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC20
 * applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20, IERC20Metadata {
    mapping(address => uint256) private _balances;

    mapping(address => mapping(address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the default value returned by this function, unless
     * it's overridden.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual override returns (uint8) {
        return 18;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address to, uint256 amount) public virtual override returns (bool) {
        address owner = _msgSender();
        _transfer(owner, to, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on
     * `transferFrom`. This is semantically equivalent to an infinite approval.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * NOTE: Does not update the allowance if the current allowance
     * is the maximum `uint256`.
     *
     * Requirements:
     *
     * - `from` and `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     * - the caller must have allowance for ``from``'s tokens of at least
     * `amount`.
     */
    function transferFrom(address from, address to, uint256 amount) public virtual override returns (bool) {
        address spender = _msgSender();
        _spendAllowance(from, spender, amount);
        _transfer(from, to, amount);
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, allowance(owner, spender) + addedValue);
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        address owner = _msgSender();
        uint256 currentAllowance = allowance(owner, spender);
        require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
        unchecked {
            _approve(owner, spender, currentAllowance - subtractedValue);
        }

        return true;
    }

    /**
     * @dev Moves `amount` of tokens from `from` to `to`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     */
    function _transfer(address from, address to, uint256 amount) internal virtual {
        require(from != address(0), "ERC20: transfer from the zero address");
        require(to != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(from, to, amount);

        uint256 fromBalance = _balances[from];
        require(fromBalance >= amount, "ERC20: transfer amount exceeds balance");
        unchecked {
            _balances[from] = fromBalance - amount;
            // Overflow not possible: the sum of all balances is capped by totalSupply, and the sum is preserved by
            // decrementing then incrementing.
            _balances[to] += amount;
        }

        emit Transfer(from, to, amount);

        _afterTokenTransfer(from, to, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply += amount;
        unchecked {
            // Overflow not possible: balance + amount is at most totalSupply + amount, which is checked above.
            _balances[account] += amount;
        }
        emit Transfer(address(0), account, amount);

        _afterTokenTransfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        uint256 accountBalance = _balances[account];
        require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
        unchecked {
            _balances[account] = accountBalance - amount;
            // Overflow not possible: amount <= accountBalance <= totalSupply.
            _totalSupply -= amount;
        }

        emit Transfer(account, address(0), amount);

        _afterTokenTransfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(address owner, address spender, uint256 amount) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Updates `owner` s allowance for `spender` based on spent `amount`.
     *
     * Does not update the allowance amount in case of infinite allowance.
     * Revert if not enough allowance is available.
     *
     * Might emit an {Approval} event.
     */
    function _spendAllowance(address owner, address spender, uint256 amount) internal virtual {
        uint256 currentAllowance = allowance(owner, spender);
        if (currentAllowance != type(uint256).max) {
            require(currentAllowance >= amount, "ERC20: insufficient allowance");
            unchecked {
                _approve(owner, spender, currentAllowance - amount);
            }
        }
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual {}

    /**
     * @dev Hook that is called after any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * has been transferred to `to`.
     * - when `from` is zero, `amount` tokens have been minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens have been burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _afterTokenTransfer(address from, address to, uint256 amount) internal virtual {}
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.6.12;
pragma experimental ABIEncoderV2;

import "./IUniswapV3SwapCallback.sol";

/// @title Router token swapping functionality
/// @notice Functions for swapping tokens via Uniswap V3
interface ISwapRouter is IUniswapV3SwapCallback {
    struct ExactInputSingleParams {
        address tokenIn;
        address tokenOut;
        uint24 fee;
        address recipient;
        uint256 deadline;
        uint256 amountIn;
        uint256 amountOutMinimum;
        uint160 sqrtPriceLimitX96;
    }

    /// @notice Swaps `amountIn` of one token for as much as possible of another token
    /// @param params The parameters necessary for the swap, encoded as `ExactInputSingleParams` in calldata
    /// @return amountOut The amount of the received token
    function exactInputSingle(
        ExactInputSingleParams calldata params
    ) external payable returns (uint256 amountOut);

    struct ExactInputParams {
        bytes path;
        address recipient;
        uint256 deadline;
        uint256 amountIn;
        uint256 amountOutMinimum;
    }

    /// @notice Swaps `amountIn` of one token for as much as possible of another along the specified path
    /// @param params The parameters necessary for the multi-hop swap, encoded as `ExactInputParams` in calldata
    /// @return amountOut The amount of the received token
    function exactInput(
        ExactInputParams calldata params
    ) external payable returns (uint256 amountOut);

    struct ExactOutputSingleParams {
        address tokenIn;
        address tokenOut;
        uint24 fee;
        address recipient;
        uint256 deadline;
        uint256 amountOut;
        uint256 amountInMaximum;
        uint160 sqrtPriceLimitX96;
    }

    /// @notice Swaps as little as possible of one token for `amountOut` of another token
    /// @param params The parameters necessary for the swap, encoded as `ExactOutputSingleParams` in calldata
    /// @return amountIn The amount of the input token
    function exactOutputSingle(
        ExactOutputSingleParams calldata params
    ) external payable returns (uint256 amountIn);

    struct ExactOutputParams {
        bytes path;
        address recipient;
        uint256 deadline;
        uint256 amountOut;
        uint256 amountInMaximum;
    }

    /// @notice Swaps as little as possible of one token for `amountOut` of another along the specified path (reversed)
    /// @param params The parameters necessary for the multi-hop swap, encoded as `ExactOutputParams` in calldata
    /// @return amountIn The amount of the input token
    function exactOutput(
        ExactOutputParams calldata params
    ) external payable returns (uint256 amountIn);

    // Taken from https://soliditydeveloper.com/uniswap3
    // Manually added to the interface
    function refundETH() external payable;
}

// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity >=0.8.18;

// Math library from https://github.com/ajna-finance/ajna-core/blob/master/src/libraries/internal/Maths.sol

/**
    @title  Maths library
    @notice Internal library containing common maths.
 */
library Maths {
    uint256 internal constant WAD = 1e18;
    uint256 internal constant RAY = 1e27;

    function wmul(uint256 x, uint256 y) internal pure returns (uint256) {
        return (x * y + WAD / 2) / WAD;
    }

    function floorWmul(uint256 x, uint256 y) internal pure returns (uint256) {
        return (x * y) / WAD;
    }

    function ceilWmul(uint256 x, uint256 y) internal pure returns (uint256) {
        return (x * y + WAD - 1) / WAD;
    }

    function wdiv(uint256 x, uint256 y) internal pure returns (uint256) {
        return (x * WAD + y / 2) / y;
    }

    function floorWdiv(uint256 x, uint256 y) internal pure returns (uint256) {
        return (x * WAD) / y;
    }

    function ceilWdiv(uint256 x, uint256 y) internal pure returns (uint256) {
        return (x * WAD + y - 1) / y;
    }

    function ceilDiv(uint256 x, uint256 y) internal pure returns (uint256) {
        return (x + y - 1) / y;
    }

    function max(uint256 x, uint256 y) internal pure returns (uint256) {
        return x >= y ? x : y;
    }

    function min(uint256 x, uint256 y) internal pure returns (uint256) {
        return x <= y ? x : y;
    }

    function wad(uint256 x) internal pure returns (uint256) {
        return x * WAD;
    }

    function rmul(uint256 x, uint256 y) internal pure returns (uint256) {
        return (x * y + RAY / 2) / RAY;
    }

    function rpow(uint256 x, uint256 n) internal pure returns (uint256 z) {
        z = n % 2 != 0 ? x : RAY;

        for (n /= 2; n != 0; n /= 2) {
            x = rmul(x, x);

            if (n % 2 != 0) {
                z = rmul(z, x);
            }
        }
    }

    /*************************/
    /*** Integer Functions ***/
    /*************************/

    function maxInt(int256 x, int256 y) internal pure returns (int256) {
        return x >= y ? x : y;
    }

    function minInt(int256 x, int256 y) internal pure returns (int256) {
        return x <= y ? x : y;
    }
}

// SPDX-License-Identifier: AGPL-3.0
pragma solidity >=0.8.18;

interface ITaker {
    function auctionTakeCallback(
        address _from,
        address _sender,
        uint256 _amountTaken,
        uint256 _amountNeeded,
        bytes calldata _data
    ) external;
}

// SPDX-License-Identifier: LGPL-3.0-or-later
pragma solidity ^0.8.0;

import {ERC20} from "@openzeppelin/contracts/token/ERC20/ERC20.sol";

/// @title Gnosis Protocol v2 Order Library
/// @author Gnosis Developers
library GPv2Order {
    /// @dev The complete data for a Gnosis Protocol order. This struct contains
    /// all order parameters that are signed for submitting to GP.
    struct Data {
        ERC20 sellToken;
        ERC20 buyToken;
        address receiver;
        uint256 sellAmount;
        uint256 buyAmount;
        uint32 validTo;
        bytes32 appData;
        uint256 feeAmount;
        bytes32 kind;
        bool partiallyFillable;
        bytes32 sellTokenBalance;
        bytes32 buyTokenBalance;
    }

    /// @dev The order EIP-712 type hash for the [`GPv2Order.Data`] struct.
    ///
    /// This value is pre-computed from the following expression:
    /// ```
    /// keccak256(
    ///     "Order(" +
    ///         "address sellToken," +
    ///         "address buyToken," +
    ///         "address receiver," +
    ///         "uint256 sellAmount," +
    ///         "uint256 buyAmount," +
    ///         "uint32 validTo," +
    ///         "bytes32 appData," +
    ///         "uint256 feeAmount," +
    ///         "string kind," +
    ///         "bool partiallyFillable" +
    ///         "string sellTokenBalance" +
    ///         "string buyTokenBalance" +
    ///     ")"
    /// )
    /// ```
    bytes32 internal constant TYPE_HASH =
        hex"d5a25ba2e97094ad7d83dc28a6572da797d6b3e7fc6663bd93efb789fc17e489";

    /// @dev The marker value for a sell order for computing the order struct
    /// hash. This allows the EIP-712 compatible wallets to display a
    /// descriptive string for the order kind (instead of 0 or 1).
    ///
    /// This value is pre-computed from the following expression:
    /// ```
    /// keccak256("sell")
    /// ```
    bytes32 internal constant KIND_SELL =
        hex"f3b277728b3fee749481eb3e0b3b48980dbbab78658fc419025cb16eee346775";

    /// @dev The OrderKind marker value for a buy order for computing the order
    /// struct hash.
    ///
    /// This value is pre-computed from the following expression:
    /// ```
    /// keccak256("buy")
    /// ```
    bytes32 internal constant KIND_BUY =
        hex"6ed88e868af0a1983e3886d5f3e95a2fafbd6c3450bc229e27342283dc429ccc";

    /// @dev The TokenBalance marker value for using direct ERC20 balances for
    /// computing the order struct hash.
    ///
    /// This value is pre-computed from the following expression:
    /// ```
    /// keccak256("erc20")
    /// ```
    bytes32 internal constant BALANCE_ERC20 =
        hex"5a28e9363bb942b639270062aa6bb295f434bcdfc42c97267bf003f272060dc9";

    /// @dev The TokenBalance marker value for using Balancer Vault external
    /// balances (in order to re-use Vault ERC20 approvals) for computing the
    /// order struct hash.
    ///
    /// This value is pre-computed from the following expression:
    /// ```
    /// keccak256("external")
    /// ```
    bytes32 internal constant BALANCE_EXTERNAL =
        hex"abee3b73373acd583a130924aad6dc38cfdc44ba0555ba94ce2ff63980ea0632";

    /// @dev The TokenBalance marker value for using Balancer Vault internal
    /// balances for computing the order struct hash.
    ///
    /// This value is pre-computed from the following expression:
    /// ```
    /// keccak256("internal")
    /// ```
    bytes32 internal constant BALANCE_INTERNAL =
        hex"4ac99ace14ee0a5ef932dc609df0943ab7ac16b7583634612f8dc35a4289a6ce";

    /// @dev Marker address used to indicate that the receiver of the trade
    /// proceeds should the owner of the order.
    ///
    /// This is chosen to be `address(0)` for gas efficiency as it is expected
    /// to be the most common case.
    address internal constant RECEIVER_SAME_AS_OWNER = address(0);

    /// @dev The byte length of an order unique identifier.
    uint256 internal constant UID_LENGTH = 56;

    /// @dev Returns the actual receiver for an order. This function checks
    /// whether or not the [`receiver`] field uses the marker value to indicate
    /// it is the same as the order owner.
    ///
    /// @return receiver The actual receiver of trade proceeds.
    function actualReceiver(
        Data memory order,
        address owner
    ) internal pure returns (address receiver) {
        if (order.receiver == RECEIVER_SAME_AS_OWNER) {
            receiver = owner;
        } else {
            receiver = order.receiver;
        }
    }

    /// @dev Return the EIP-712 signing hash for the specified order.
    ///
    /// @param order The order to compute the EIP-712 signing hash for.
    /// @param domainSeparator The EIP-712 domain separator to use.
    /// @return orderDigest The 32 byte EIP-712 struct hash.
    function hash(
        Data memory order,
        bytes32 domainSeparator
    ) internal pure returns (bytes32 orderDigest) {
        bytes32 structHash;

        // NOTE: Compute the EIP-712 order struct hash in place. As suggested
        // in the EIP proposal, noting that the order struct has 10 fields, and
        // including the type hash `(12 + 1) * 32 = 416` bytes to hash.
        // <https://github.com/ethereum/EIPs/blob/master/EIPS/eip-712.md#rationale-for-encodedata>
        // solhint-disable-next-line no-inline-assembly
        assembly {
            let dataStart := sub(order, 32)
            let temp := mload(dataStart)
            mstore(dataStart, TYPE_HASH)
            structHash := keccak256(dataStart, 416)
            mstore(dataStart, temp)
        }

        // NOTE: Now that we have the struct hash, compute the EIP-712 signing
        // hash using scratch memory past the free memory pointer. The signing
        // hash is computed from `"\x19\x01" || domainSeparator || structHash`.
        // <https://docs.soliditylang.org/en/v0.7.6/internals/layout_in_memory.html#layout-in-memory>
        // <https://github.com/ethereum/EIPs/blob/master/EIPS/eip-712.md#specification>
        // solhint-disable-next-line no-inline-assembly
        assembly {
            let freeMemoryPointer := mload(0x40)
            mstore(freeMemoryPointer, "\x19\x01")
            mstore(add(freeMemoryPointer, 2), domainSeparator)
            mstore(add(freeMemoryPointer, 34), structHash)
            orderDigest := keccak256(freeMemoryPointer, 66)
        }
    }

    /// @dev Packs order UID parameters into the specified memory location. The
    /// result is equivalent to `abi.encodePacked(...)` with the difference that
    /// it allows re-using the memory for packing the order UID.
    ///
    /// This function reverts if the order UID buffer is not the correct size.
    ///
    /// @param orderUid The buffer pack the order UID parameters into.
    /// @param orderDigest The EIP-712 struct digest derived from the order
    /// parameters.
    /// @param owner The address of the user who owns this order.
    /// @param validTo The epoch time at which the order will stop being valid.
    function packOrderUidParams(
        bytes memory orderUid,
        bytes32 orderDigest,
        address owner,
        uint32 validTo
    ) internal pure {
        require(orderUid.length == UID_LENGTH, "GPv2: uid buffer overflow");

        // NOTE: Write the order UID to the allocated memory buffer. The order
        // parameters are written to memory in **reverse order** as memory
        // operations write 32-bytes at a time and we want to use a packed
        // encoding. This means, for example, that after writing the value of
        // `owner` to bytes `20:52`, writing the `orderDigest` to bytes `0:32`
        // will **overwrite** bytes `20:32`. This is desirable as addresses are
        // only 20 bytes and `20:32` should be `0`s:
        //
        //        |           1111111111222222222233333333334444444444555555
        //   byte | 01234567890123456789012345678901234567890123456789012345
        // -------+---------------------------------------------------------
        //  field | [.........orderDigest..........][......owner.......][vT]
        // -------+---------------------------------------------------------
        // mstore |                         [000000000000000000000000000.vT]
        //        |                     [00000000000.......owner.......]
        //        | [.........orderDigest..........]
        //
        // Additionally, since Solidity `bytes memory` are length prefixed,
        // 32 needs to be added to all the offsets.
        //
        // solhint-disable-next-line no-inline-assembly
        assembly {
            mstore(add(orderUid, 56), validTo)
            mstore(add(orderUid, 52), owner)
            mstore(add(orderUid, 32), orderDigest)
        }
    }

    /// @dev Extracts specific order information from the standardized unique
    /// order id of the protocol.
    ///
    /// @param orderUid The unique identifier used to represent an order in
    /// the protocol. This uid is the packed concatenation of the order digest,
    /// the validTo order parameter and the address of the user who created the
    /// order. It is used by the user to interface with the contract directly,
    /// and not by calls that are triggered by the solvers.
    /// @return orderDigest The EIP-712 signing digest derived from the order
    /// parameters.
    /// @return owner The address of the user who owns this order.
    /// @return validTo The epoch time at which the order will stop being valid.
    function extractOrderUidParams(
        bytes calldata orderUid
    )
        internal
        pure
        returns (bytes32 orderDigest, address owner, uint32 validTo)
    {
        require(orderUid.length == UID_LENGTH, "GPv2: invalid uid");

        // Use assembly to efficiently decode packed calldata.
        // solhint-disable-next-line no-inline-assembly
        assembly {
            orderDigest := calldataload(orderUid.offset)
            owner := shr(96, calldataload(add(orderUid.offset, 32)))
            validTo := shr(224, calldataload(add(orderUid.offset, 52)))
        }
    }
}

// SPDX-License-Identifier: AGPL-3.0
pragma solidity >=0.8.18;

import {Governance} from "./Governance.sol";

contract Governance2Step is Governance {
    /// @notice Emitted when the pending governance address is set.
    event UpdatePendingGovernance(address indexed newPendingGovernance);

    /// @notice Address that is set to take over governance.
    address public pendingGovernance;

    constructor(address _governance) Governance(_governance) {}

    /**
     * @notice Sets a new address as the `pendingGovernance` of the contract.
     * @dev Throws if the caller is not current governance.
     * @param _newGovernance The new governance address.
     */
    function transferGovernance(
        address _newGovernance
    ) external virtual override onlyGovernance {
        require(_newGovernance != address(0), "ZERO ADDRESS");
        pendingGovernance = _newGovernance;

        emit UpdatePendingGovernance(_newGovernance);
    }

    /**
     * @notice Allows the `pendingGovernance` to accept the role.
     */
    function acceptGovernance() external virtual {
        require(msg.sender == pendingGovernance, "!pending governance");

        emit GovernanceTransferred(governance, msg.sender);

        governance = msg.sender;
        pendingGovernance = address(0);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (security/ReentrancyGuard.sol)

pragma solidity ^0.8.0;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;

    uint256 private _status;

    constructor() {
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and making it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        _nonReentrantBefore();
        _;
        _nonReentrantAfter();
    }

    function _nonReentrantBefore() private {
        // On the first call to nonReentrant, _status will be _NOT_ENTERED
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");

        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;
    }

    function _nonReentrantAfter() private {
        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Returns true if the reentrancy guard is currently set to "entered", which indicates there is a
     * `nonReentrant` function in the call stack.
     */
    function _reentrancyGuardEntered() internal view returns (bool) {
        return _status == _ENTERED;
    }
}

// SPDX-License-Identifier: AGPL-3.0
pragma solidity >=0.8.18;

import {ERC20} from "@openzeppelin/contracts/token/ERC20/ERC20.sol";
import {IERC4626} from "@openzeppelin/contracts/interfaces/IERC4626.sol";
import {IERC20Permit} from "@openzeppelin/contracts/token/ERC20/extensions/IERC20Permit.sol";

// Interface that implements the 4626 standard and the implementation functions
interface ITokenizedStrategy is IERC4626, IERC20Permit {
    /*//////////////////////////////////////////////////////////////
                                 EVENTS
    //////////////////////////////////////////////////////////////*/

    event StrategyShutdown();

    event NewTokenizedStrategy(
        address indexed strategy,
        address indexed asset,
        string apiVersion
    );

    event Reported(
        uint256 profit,
        uint256 loss,
        uint256 protocolFees,
        uint256 performanceFees
    );

    event UpdatePerformanceFeeRecipient(
        address indexed newPerformanceFeeRecipient
    );

    event UpdateKeeper(address indexed newKeeper);

    event UpdatePerformanceFee(uint16 newPerformanceFee);

    event UpdateManagement(address indexed newManagement);

    event UpdateEmergencyAdmin(address indexed newEmergencyAdmin);

    event UpdateProfitMaxUnlockTime(uint256 newProfitMaxUnlockTime);

    event UpdatePendingManagement(address indexed newPendingManagement);

    /*//////////////////////////////////////////////////////////////
                           INITIALIZATION
    //////////////////////////////////////////////////////////////*/

    function initialize(
        address _asset,
        string memory _name,
        address _management,
        address _performanceFeeRecipient,
        address _keeper
    ) external;

    /*//////////////////////////////////////////////////////////////
                    NON-STANDARD 4626 OPTIONS
    //////////////////////////////////////////////////////////////*/

    function withdraw(
        uint256 assets,
        address receiver,
        address owner,
        uint256 maxLoss
    ) external returns (uint256);

    function redeem(
        uint256 shares,
        address receiver,
        address owner,
        uint256 maxLoss
    ) external returns (uint256);

    function maxWithdraw(
        address owner,
        uint256 /*maxLoss*/
    ) external view returns (uint256);

    function maxRedeem(
        address owner,
        uint256 /*maxLoss*/
    ) external view returns (uint256);

    /*//////////////////////////////////////////////////////////////
                        MODIFIER HELPERS
    //////////////////////////////////////////////////////////////*/

    function requireManagement(address _sender) external view;

    function requireKeeperOrManagement(address _sender) external view;

    function requireEmergencyAuthorized(address _sender) external view;

    /*//////////////////////////////////////////////////////////////
                        KEEPERS FUNCTIONS
    //////////////////////////////////////////////////////////////*/

    function tend() external;

    function report() external returns (uint256 _profit, uint256 _loss);

    /*//////////////////////////////////////////////////////////////
                        CONSTANTS
    //////////////////////////////////////////////////////////////*/

    function MAX_FEE() external view returns (uint16);

    function FACTORY() external view returns (address);

    /*//////////////////////////////////////////////////////////////
                            GETTERS
    //////////////////////////////////////////////////////////////*/

    function apiVersion() external view returns (string memory);

    function pricePerShare() external view returns (uint256);

    function management() external view returns (address);

    function pendingManagement() external view returns (address);

    function keeper() external view returns (address);

    function emergencyAdmin() external view returns (address);

    function performanceFee() external view returns (uint16);

    function performanceFeeRecipient() external view returns (address);

    function fullProfitUnlockDate() external view returns (uint256);

    function profitUnlockingRate() external view returns (uint256);

    function profitMaxUnlockTime() external view returns (uint256);

    function lastReport() external view returns (uint256);

    function isShutdown() external view returns (bool);

    function unlockedShares() external view returns (uint256);

    /*//////////////////////////////////////////////////////////////
                            SETTERS
    //////////////////////////////////////////////////////////////*/

    function setPendingManagement(address) external;

    function acceptManagement() external;

    function setKeeper(address _keeper) external;

    function setEmergencyAdmin(address _emergencyAdmin) external;

    function setPerformanceFee(uint16 _performanceFee) external;

    function setPerformanceFeeRecipient(
        address _performanceFeeRecipient
    ) external;

    function setProfitMaxUnlockTime(uint256 _profitMaxUnlockTime) external;

    function setName(string calldata _newName) external;

    function shutdownStrategy() external;

    function emergencyWithdraw(uint256 _amount) external;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 *
 * _Available since v4.1._
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.4) (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    function _contextSuffixLength() internal view virtual returns (uint256) {
        return 0;
    }
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;

/// @title Callback for IUniswapV3PoolActions#swap
/// @notice Any contract that calls IUniswapV3PoolActions#swap must implement this interface
interface IUniswapV3SwapCallback {
    /// @notice Called to `msg.sender` after executing a swap via IUniswapV3Pool#swap.
    /// @dev In the implementation you must pay the pool tokens owed for the swap.
    /// The caller of this method must be checked to be a UniswapV3Pool deployed by the canonical UniswapV3Factory.
    /// amount0Delta and amount1Delta can both be 0 if no tokens were swapped.
    /// @param amount0Delta The amount of token0 that was sent (negative) or must be received (positive) by the pool by
    /// the end of the swap. If positive, the callback must send that amount of token0 to the pool.
    /// @param amount1Delta The amount of token1 that was sent (negative) or must be received (positive) by the pool by
    /// the end of the swap. If positive, the callback must send that amount of token1 to the pool.
    /// @param data Any data passed through by the caller via the IUniswapV3PoolActions#swap call
    function uniswapV3SwapCallback(
        int256 amount0Delta,
        int256 amount1Delta,
        bytes calldata data
    ) external;
}

// SPDX-License-Identifier: AGPL-3.0
pragma solidity >=0.8.18;

contract Governance {
    /// @notice Emitted when the governance address is updated.
    event GovernanceTransferred(
        address indexed previousGovernance,
        address indexed newGovernance
    );

    modifier onlyGovernance() {
        _checkGovernance();
        _;
    }

    /// @notice Checks if the msg sender is the governance.
    function _checkGovernance() internal view virtual {
        require(governance == msg.sender, "!governance");
    }

    /// @notice Address that can set the default base fee and provider
    address public governance;

    constructor(address _governance) {
        governance = _governance;

        emit GovernanceTransferred(address(0), _governance);
    }

    /**
     * @notice Sets a new address as the governance of the contract.
     * @dev Throws if the caller is not current governance.
     * @param _newGovernance The new governance address.
     */
    function transferGovernance(
        address _newGovernance
    ) external virtual onlyGovernance {
        require(_newGovernance != address(0), "ZERO ADDRESS");
        address oldGovernance = governance;
        governance = _newGovernance;

        emit GovernanceTransferred(oldGovernance, _newGovernance);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (interfaces/IERC4626.sol)

pragma solidity ^0.8.0;

import "../token/ERC20/IERC20.sol";
import "../token/ERC20/extensions/IERC20Metadata.sol";

/**
 * @dev Interface of the ERC4626 "Tokenized Vault Standard", as defined in
 * https://eips.ethereum.org/EIPS/eip-4626[ERC-4626].
 *
 * _Available since v4.7._
 */
interface IERC4626 is IERC20, IERC20Metadata {
    event Deposit(address indexed sender, address indexed owner, uint256 assets, uint256 shares);

    event Withdraw(
        address indexed sender,
        address indexed receiver,
        address indexed owner,
        uint256 assets,
        uint256 shares
    );

    /**
     * @dev Returns the address of the underlying token used for the Vault for accounting, depositing, and withdrawing.
     *
     * - MUST be an ERC-20 token contract.
     * - MUST NOT revert.
     */
    function asset() external view returns (address assetTokenAddress);

    /**
     * @dev Returns the total amount of the underlying asset that is “managed” by Vault.
     *
     * - SHOULD include any compounding that occurs from yield.
     * - MUST be inclusive of any fees that are charged against assets in the Vault.
     * - MUST NOT revert.
     */
    function totalAssets() external view returns (uint256 totalManagedAssets);

    /**
     * @dev Returns the amount of shares that the Vault would exchange for the amount of assets provided, in an ideal
     * scenario where all the conditions are met.
     *
     * - MUST NOT be inclusive of any fees that are charged against assets in the Vault.
     * - MUST NOT show any variations depending on the caller.
     * - MUST NOT reflect slippage or other on-chain conditions, when performing the actual exchange.
     * - MUST NOT revert.
     *
     * NOTE: This calculation MAY NOT reflect the “per-user” price-per-share, and instead should reflect the
     * “average-user’s” price-per-share, meaning what the average user should expect to see when exchanging to and
     * from.
     */
    function convertToShares(uint256 assets) external view returns (uint256 shares);

    /**
     * @dev Returns the amount of assets that the Vault would exchange for the amount of shares provided, in an ideal
     * scenario where all the conditions are met.
     *
     * - MUST NOT be inclusive of any fees that are charged against assets in the Vault.
     * - MUST NOT show any variations depending on the caller.
     * - MUST NOT reflect slippage or other on-chain conditions, when performing the actual exchange.
     * - MUST NOT revert.
     *
     * NOTE: This calculation MAY NOT reflect the “per-user” price-per-share, and instead should reflect the
     * “average-user’s” price-per-share, meaning what the average user should expect to see when exchanging to and
     * from.
     */
    function convertToAssets(uint256 shares) external view returns (uint256 assets);

    /**
     * @dev Returns the maximum amount of the underlying asset that can be deposited into the Vault for the receiver,
     * through a deposit call.
     *
     * - MUST return a limited value if receiver is subject to some deposit limit.
     * - MUST return 2 ** 256 - 1 if there is no limit on the maximum amount of assets that may be deposited.
     * - MUST NOT revert.
     */
    function maxDeposit(address receiver) external view returns (uint256 maxAssets);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their deposit at the current block, given
     * current on-chain conditions.
     *
     * - MUST return as close to and no more than the exact amount of Vault shares that would be minted in a deposit
     *   call in the same transaction. I.e. deposit should return the same or more shares as previewDeposit if called
     *   in the same transaction.
     * - MUST NOT account for deposit limits like those returned from maxDeposit and should always act as though the
     *   deposit would be accepted, regardless if the user has enough tokens approved, etc.
     * - MUST be inclusive of deposit fees. Integrators should be aware of the existence of deposit fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToShares and previewDeposit SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by depositing.
     */
    function previewDeposit(uint256 assets) external view returns (uint256 shares);

    /**
     * @dev Mints shares Vault shares to receiver by depositing exactly amount of underlying tokens.
     *
     * - MUST emit the Deposit event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
     *   deposit execution, and are accounted for during deposit.
     * - MUST revert if all of assets cannot be deposited (due to deposit limit being reached, slippage, the user not
     *   approving enough underlying tokens to the Vault contract, etc).
     *
     * NOTE: most implementations will require pre-approval of the Vault with the Vault’s underlying asset token.
     */
    function deposit(uint256 assets, address receiver) external returns (uint256 shares);

    /**
     * @dev Returns the maximum amount of the Vault shares that can be minted for the receiver, through a mint call.
     * - MUST return a limited value if receiver is subject to some mint limit.
     * - MUST return 2 ** 256 - 1 if there is no limit on the maximum amount of shares that may be minted.
     * - MUST NOT revert.
     */
    function maxMint(address receiver) external view returns (uint256 maxShares);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their mint at the current block, given
     * current on-chain conditions.
     *
     * - MUST return as close to and no fewer than the exact amount of assets that would be deposited in a mint call
     *   in the same transaction. I.e. mint should return the same or fewer assets as previewMint if called in the
     *   same transaction.
     * - MUST NOT account for mint limits like those returned from maxMint and should always act as though the mint
     *   would be accepted, regardless if the user has enough tokens approved, etc.
     * - MUST be inclusive of deposit fees. Integrators should be aware of the existence of deposit fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToAssets and previewMint SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by minting.
     */
    function previewMint(uint256 shares) external view returns (uint256 assets);

    /**
     * @dev Mints exactly shares Vault shares to receiver by depositing amount of underlying tokens.
     *
     * - MUST emit the Deposit event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the mint
     *   execution, and are accounted for during mint.
     * - MUST revert if all of shares cannot be minted (due to deposit limit being reached, slippage, the user not
     *   approving enough underlying tokens to the Vault contract, etc).
     *
     * NOTE: most implementations will require pre-approval of the Vault with the Vault’s underlying asset token.
     */
    function mint(uint256 shares, address receiver) external returns (uint256 assets);

    /**
     * @dev Returns the maximum amount of the underlying asset that can be withdrawn from the owner balance in the
     * Vault, through a withdraw call.
     *
     * - MUST return a limited value if owner is subject to some withdrawal limit or timelock.
     * - MUST NOT revert.
     */
    function maxWithdraw(address owner) external view returns (uint256 maxAssets);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their withdrawal at the current block,
     * given current on-chain conditions.
     *
     * - MUST return as close to and no fewer than the exact amount of Vault shares that would be burned in a withdraw
     *   call in the same transaction. I.e. withdraw should return the same or fewer shares as previewWithdraw if
     *   called
     *   in the same transaction.
     * - MUST NOT account for withdrawal limits like those returned from maxWithdraw and should always act as though
     *   the withdrawal would be accepted, regardless if the user has enough shares, etc.
     * - MUST be inclusive of withdrawal fees. Integrators should be aware of the existence of withdrawal fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToShares and previewWithdraw SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by depositing.
     */
    function previewWithdraw(uint256 assets) external view returns (uint256 shares);

    /**
     * @dev Burns shares from owner and sends exactly assets of underlying tokens to receiver.
     *
     * - MUST emit the Withdraw event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
     *   withdraw execution, and are accounted for during withdraw.
     * - MUST revert if all of assets cannot be withdrawn (due to withdrawal limit being reached, slippage, the owner
     *   not having enough shares, etc).
     *
     * Note that some implementations will require pre-requesting to the Vault before a withdrawal may be performed.
     * Those methods should be performed separately.
     */
    function withdraw(uint256 assets, address receiver, address owner) external returns (uint256 shares);

    /**
     * @dev Returns the maximum amount of Vault shares that can be redeemed from the owner balance in the Vault,
     * through a redeem call.
     *
     * - MUST return a limited value if owner is subject to some withdrawal limit or timelock.
     * - MUST return balanceOf(owner) if owner is not subject to any withdrawal limit or timelock.
     * - MUST NOT revert.
     */
    function maxRedeem(address owner) external view returns (uint256 maxShares);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their redeemption at the current block,
     * given current on-chain conditions.
     *
     * - MUST return as close to and no more than the exact amount of assets that would be withdrawn in a redeem call
     *   in the same transaction. I.e. redeem should return the same or more assets as previewRedeem if called in the
     *   same transaction.
     * - MUST NOT account for redemption limits like those returned from maxRedeem and should always act as though the
     *   redemption would be accepted, regardless if the user has enough shares, etc.
     * - MUST be inclusive of withdrawal fees. Integrators should be aware of the existence of withdrawal fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToAssets and previewRedeem SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by redeeming.
     */
    function previewRedeem(uint256 shares) external view returns (uint256 assets);

    /**
     * @dev Burns exactly shares from owner and sends assets of underlying tokens to receiver.
     *
     * - MUST emit the Withdraw event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
     *   redeem execution, and are accounted for during redeem.
     * - MUST revert if all of shares cannot be redeemed (due to withdrawal limit being reached, slippage, the owner
     *   not having enough shares, etc).
     *
     * NOTE: some implementations will require pre-requesting to the Vault before a withdrawal may be performed.
     * Those methods should be performed separately.
     */
    function redeem(uint256 shares, address receiver, address owner) external returns (uint256 assets);
}

{
  "remappings": [
    "@openzeppelin/=lib/openzeppelin-contracts/",
    "forge-std/=lib/forge-std/src/",
    "@tokenized-strategy/=lib/tokenized-strategy/src/",
    "@periphery/=lib/tokenized-strategy-periphery/src/",
    "@uniswap-v3-core/=lib/uniswap-v3-core/contracts/",
    "@yearn-vaults/=lib/tokenized-strategy-periphery/lib/yearn-vaults-v3/contracts/",
    "ds-test/=lib/forge-std/lib/ds-test/src/",
    "erc4626-tests/=lib/tokenized-strategy/lib/erc4626-tests/",
    "openzeppelin-contracts/=lib/openzeppelin-contracts/",
    "openzeppelin/=lib/openzeppelin-contracts/contracts/",
    "tokenized-strategy-periphery/=lib/tokenized-strategy-periphery/",
    "tokenized-strategy/=lib/tokenized-strategy/",
    "uniswap-v3-core/=lib/uniswap-v3-core/contracts/",
    "yearn-vaults-v3/=lib/tokenized-strategy-periphery/lib/yearn-vaults-v3/"
  ],
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "metadata": {
    "useLiteralContent": false,
    "bytecodeHash": "ipfs",
    "appendCBOR": true
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "evmVersion": "cancun",
  "viaIR": false,
  "libraries": {
    "src/libraries/UniswapV3SwapSimulator.sol": {
      "UniswapV3SwapSimulator": "0x2d26333c3Ca32A6ceaE0BCfB07155Ed8e8563072"
    }
  }
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[],"stateMutability":"nonpayable","type":"constructor"},{"stateMutability":"nonpayable","type":"fallback"},{"inputs":[],"name":"REWARDS_TOKEN","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"STAKING","outputs":[{"internalType":"contract IStaking","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"allowed","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"auction","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_receiver","type":"address"}],"name":"availableDepositLimit","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"availableWithdrawLimit","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"balanceOfAsset","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"balanceOfRewards","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"balanceOfStake","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"base","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"claimRewards","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"claimableRewards","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"deployFunds","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"doHealthCheck","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"freeFunds","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"harvestAndReport","outputs":[{"internalType":"uint256","name":"_totalAssets","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_token","type":"address"}],"name":"kickAuction","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"lossLimitRatio","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"minAmountToSell","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"openDeposits","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"profitLimitRatio","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"referral","outputs":[{"internalType":"uint16","name":"","type":"uint16"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"router","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_depositor","type":"address"},{"internalType":"bool","name":"_allowed","type":"bool"}],"name":"setAllowed","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_auction","type":"address"}],"name":"setAuction","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bool","name":"_doHealthCheck","type":"bool"}],"name":"setDoHealthCheck","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_newLossLimitRatio","type":"uint256"}],"name":"setLossLimitRatio","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_minAmountToSell","type":"uint256"}],"name":"setMinAmountToSell","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bool","name":"_openDeposits","type":"bool"}],"name":"setOpenDeposits","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_newProfitLimitRatio","type":"uint256"}],"name":"setProfitLimitRatio","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint16","name":"_referral","type":"uint16"}],"name":"setReferral","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint24","name":"_rewardToBase","type":"uint24"}],"name":"setUniV3Fees","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bool","name":"_useAuction","type":"bool"}],"name":"setUseAuction","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"shutdownWithdraw","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_totalIdle","type":"uint256"}],"name":"tendThis","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"tendTrigger","outputs":[{"internalType":"bool","name":"","type":"bool"},{"internalType":"bytes","name":"","type":"bytes"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"tokenizedStrategyAddress","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"},{"internalType":"address","name":"","type":"address"}],"name":"uniFees","outputs":[{"internalType":"uint24","name":"","type":"uint24"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"useAuction","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"}]

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