Contract Source Code (Solidity)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

/**
 *Submitted for verification at Etherscan.io on 2023-09-07
*/

// File: @openzeppelin/contracts/utils/math/SafeMath.sol
// OpenZeppelin Contracts (last updated v4.9.0) (utils/math/SafeMath.sol)

pragma solidity ^0.8.0;

// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.

/**
 * @dev Wrappers over Solidity's arithmetic operations.
 *
 * NOTE: `SafeMath` is generally not needed starting with Solidity 0.8, since the compiler
 * now has built in overflow checking.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            uint256 c = a + b;
            if (c < a) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b > a) return (false, 0);
            return (true, a - b);
        }
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
            // benefit is lost if 'b' is also tested.
            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
            if (a == 0) return (true, 0);
            uint256 c = a * b;
            if (c / a != b) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a / b);
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a % b);
        }
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        return a + b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        return a * b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator.
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        unchecked {
            require(b <= a, errorMessage);
            return a - b;
        }
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a / b;
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a % b;
        }
    }
}

// File: @openzeppelin/contracts/token/ERC20/IERC20.sol

// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 amount) external returns (bool);
}

// File: @openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol

// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 *
 * _Available since v4.1._
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

// File: @openzeppelin/contracts/utils/Context.sol

// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// File: @openzeppelin/contracts/token/ERC20/ERC20.sol

// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/ERC20.sol)

pragma solidity ^0.8.0;



/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * The default value of {decimals} is 18. To change this, you should override
 * this function so it returns a different value.
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC20
 * applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20, IERC20Metadata {
    mapping(address => uint256) private _balances;

    mapping(address => mapping(address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the default value returned by this function, unless
     * it's overridden.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual override returns (uint8) {
        return 18;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address to, uint256 amount) public virtual override returns (bool) {
        address owner = _msgSender();
        _transfer(owner, to, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on
     * `transferFrom`. This is semantically equivalent to an infinite approval.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * NOTE: Does not update the allowance if the current allowance
     * is the maximum `uint256`.
     *
     * Requirements:
     *
     * - `from` and `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     * - the caller must have allowance for ``from``'s tokens of at least
     * `amount`.
     */
    function transferFrom(address from, address to, uint256 amount) public virtual override returns (bool) {
        address spender = _msgSender();
        _spendAllowance(from, spender, amount);
        _transfer(from, to, amount);
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, allowance(owner, spender) + addedValue);
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        address owner = _msgSender();
        uint256 currentAllowance = allowance(owner, spender);
        require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
        unchecked {
            _approve(owner, spender, currentAllowance - subtractedValue);
        }

        return true;
    }

    /**
     * @dev Moves `amount` of tokens from `from` to `to`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     */
    function _transfer(address from, address to, uint256 amount) internal virtual {
        require(from != address(0), "ERC20: transfer from the zero address");
        require(to != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(from, to, amount);

        uint256 fromBalance = _balances[from];
        require(fromBalance >= amount, "ERC20: transfer amount exceeds balance");
        unchecked {
            _balances[from] = fromBalance - amount;
            // Overflow not possible: the sum of all balances is capped by totalSupply, and the sum is preserved by
            // decrementing then incrementing.
            _balances[to] += amount;
        }

        emit Transfer(from, to, amount);

        _afterTokenTransfer(from, to, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply += amount;
        unchecked {
            // Overflow not possible: balance + amount is at most totalSupply + amount, which is checked above.
            _balances[account] += amount;
        }
        emit Transfer(address(0), account, amount);

        _afterTokenTransfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        uint256 accountBalance = _balances[account];
        require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
        unchecked {
            _balances[account] = accountBalance - amount;
            // Overflow not possible: amount <= accountBalance <= totalSupply.
            _totalSupply -= amount;
        }

        emit Transfer(account, address(0), amount);

        _afterTokenTransfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(address owner, address spender, uint256 amount) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Updates `owner` s allowance for `spender` based on spent `amount`.
     *
     * Does not update the allowance amount in case of infinite allowance.
     * Revert if not enough allowance is available.
     *
     * Might emit an {Approval} event.
     */
    function _spendAllowance(address owner, address spender, uint256 amount) internal virtual {
        uint256 currentAllowance = allowance(owner, spender);
        if (currentAllowance != type(uint256).max) {
            require(currentAllowance >= amount, "ERC20: insufficient allowance");
            unchecked {
                _approve(owner, spender, currentAllowance - amount);
            }
        }
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual {}

    /**
     * @dev Hook that is called after any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * has been transferred to `to`.
     * - when `from` is zero, `amount` tokens have been minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens have been burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _afterTokenTransfer(address from, address to, uint256 amount) internal virtual {}
}

// File: contracts/tokens/TokenBase.sol

pragma solidity ^0.8.0;

contract TokenBase is ERC20 {
    address public admin;
    constructor(string memory name, string memory symbol) ERC20(name, symbol) {
        admin = msg.sender;
    }

    function updateAdmin(address newAdmin) external {
        require(msg.sender == admin, 'only admin');
        admin = newAdmin;
    }

    function mint(address to, uint amount) external {
        require(msg.sender == admin, 'only admin');
        _mint(to, amount);
    }
    
    function burn(address owner, uint amount) external {
        require(msg.sender == admin, 'only admin');
        _burn(owner, amount);
    }

    function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(sender, recipient, amount);
        return true;
    }

    function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(msg.sender, recipient, amount);
        return true;
    }

    function decimals() public view virtual override returns (uint8) {
        return 18;
    }

    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        _approve(msg.sender, spender, amount);
        return true;
    }

}

// File: contracts/trustless/TreatBridge.sol

pragma solidity ^0.8.0;

contract TreatBridge  {
    using SafeMath for uint256;
    
    address public owner;
    address public pendingOwner;
    address public controller;


    TokenBase public token;
    uint256 public _balance;
    uint256 public _tax;
    uint256 public _taxMaxValue;
    uint128 public _fee;


    enum Step { Burn, Mint }

    event Transfer(
        address from,
        address to,
        uint amount,
        uint date,
        Step indexed step
    );

    event Deposit(
        address indexed account,
        uint256 amount
    );

    event Withdraw(
        address indexed account,
        uint256 amount
    );

    event ControllerChanged(address indexed previousBridge, address indexed newBridge);
    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
    
    modifier onlyOwner() { require(msg.sender == owner, "BridgeBase: caller is not the owner"); _; }
    modifier onlyController() { require(msg.sender == controller, "TreatBridge: caller is not the bridge"); _; }

    constructor(address _token) {
        // Ensure that the _token address is not zero
        require(_token != address(0), "Bridge: token address cannot be 0");
        token = TokenBase(_token);
        
        owner = msg.sender;
        _tax = 0;
        _taxMaxValue = 0;
        
        // set _fee to 0.005 ether
        _fee = 5000000000000000;
    }

    function setFee(uint128 fee) external onlyOwner {
        _fee = fee;
    }

     function setController(address _bridge) external onlyOwner {
        controller = _bridge;
        emit ControllerChanged(controller, _bridge);
    }

    function transferOwnership(address _pendingOwner) external onlyOwner {
        pendingOwner = _pendingOwner;
    }

    function acceptOwnership() external {
        require(msg.sender == pendingOwner, "BridgeBase: caller is not the pending owner");
        emit OwnershipTransferred(owner, pendingOwner);
        owner = pendingOwner;
        pendingOwner = address(0);
    }

    function setToken (address _token) external onlyOwner {
        token = TokenBase(_token);
        
    }

    function setTax (uint256 tax) external onlyOwner {
        _tax = tax;
    }

    function setTaxMaxValue (uint256 taxMaxValue) external onlyOwner {
        _taxMaxValue = taxMaxValue;
    }

    function deposit(uint256 _amount) external onlyOwner {
       
        // Ensure bridge has allowance to transfer from user
        require(token.allowance(msg.sender, address(this)) >= _amount, "BridgeBase: insufficient allowance for deposit");
        require(token.balanceOf(msg.sender) >= _amount, "BridgeBase: insufficient balance for deposit");

        token.transferFrom(msg.sender, address(this), _amount);
        _balance = _balance.add(_amount);

        emit Deposit(msg.sender, _amount);

    }

    function withdraw(uint256 _amount) external onlyOwner {
        // Ensure bridge has enough token to mint
        require(token.balanceOf(address(this)) >= _amount, "BridgeBase: insufficient balance for withdraw");

        token.transfer(msg.sender, _amount);
        _balance = _balance.sub(_amount);

        emit Withdraw(msg.sender, _amount);
    }

    function unlock(address account, uint256 amount) virtual external onlyController returns (bool) {
        require(account != address(0), "Bridge: mint to the zero address");
        // Ensure bridge has enough token to mint
        require(token.balanceOf(address(this)) >= amount, "Bridge: insufficient balance for mint");



        _balance = _balance.sub(amount);
        token.transfer(account, amount);

       
        emit Transfer(
            address(this),
            account,
            amount,
            block.timestamp,
            Step.Mint
            
        );

        return true;
    }

    function lock(uint256 amount) payable external returns (bool) {
        require(token.allowance(msg.sender, address(this)) >= amount, "Bridge: insufficient allowance to bridge");
        require(token.balanceOf(msg.sender) >= amount, "Bridge: insufficient balance to bridge");
        // require _fee to be paid
        require(msg.value >= _fee, "Bridge: insufficient fee");


        
        token.transferFrom(msg.sender, address(this), amount);
        _balance = _balance.add(amount);

        payable(controller).transfer(_fee);

        // Calculate tax amount
        // Get the percentage value for the tax
        uint256 taxAmount = amount.mul(_tax).div(100);
        // Ensure tax amount is not greater than the max tax value
        if(taxAmount > _taxMaxValue) {
            taxAmount = _taxMaxValue;
        }

        uint256 amountAfterTax = amount.sub(taxAmount);

        emit Transfer(
            msg.sender,
            address(this),
            amountAfterTax,
            block.timestamp,
            Step.Burn
        );

        return true;
    }

    receive() external payable {}

}

// File: @openzeppelin/contracts/access/Ownable.sol

// OpenZeppelin Contracts (last updated v4.9.0) (access/Ownable.sol)

pragma solidity ^0.8.0;

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby disabling any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// File: @uniswap/v2-core/contracts/interfaces/IUniswapV2Factory.sol

pragma solidity >=0.5.0;

interface IUniswapV2Factory {
    event PairCreated(address indexed token0, address indexed token1, address pair, uint);

    function feeTo() external view returns (address);
    function feeToSetter() external view returns (address);

    function getPair(address tokenA, address tokenB) external view returns (address pair);
    function allPairs(uint) external view returns (address pair);
    function allPairsLength() external view returns (uint);

    function createPair(address tokenA, address tokenB) external returns (address pair);

    function setFeeTo(address) external;
    function setFeeToSetter(address) external;
}

// File: @uniswap/v2-core/contracts/interfaces/IUniswapV2ERC20.sol

pragma solidity >=0.5.0;

interface IUniswapV2ERC20 {
    event Approval(address indexed owner, address indexed spender, uint value);
    event Transfer(address indexed from, address indexed to, uint value);

    function name() external pure returns (string memory);
    function symbol() external pure returns (string memory);
    function decimals() external pure returns (uint8);
    function totalSupply() external view returns (uint);
    function balanceOf(address owner) external view returns (uint);
    function allowance(address owner, address spender) external view returns (uint);

    function approve(address spender, uint value) external returns (bool);
    function transfer(address to, uint value) external returns (bool);
    function transferFrom(address from, address to, uint value) external returns (bool);

    function DOMAIN_SEPARATOR() external view returns (bytes32);
    function PERMIT_TYPEHASH() external pure returns (bytes32);
    function nonces(address owner) external view returns (uint);

    function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external;
}

// File: @uniswap/v2-periphery/contracts/interfaces/IUniswapV2Router01.sol

pragma solidity >=0.6.2;

interface IUniswapV2Router01 {
    function factory() external pure returns (address);
    function WETH() external pure returns (address);

    function addLiquidity(
        address tokenA,
        address tokenB,
        uint amountADesired,
        uint amountBDesired,
        uint amountAMin,
        uint amountBMin,
        address to,
        uint deadline
    ) external returns (uint amountA, uint amountB, uint liquidity);
    function addLiquidityETH(
        address token,
        uint amountTokenDesired,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline
    ) external payable returns (uint amountToken, uint amountETH, uint liquidity);
    function removeLiquidity(
        address tokenA,
        address tokenB,
        uint liquidity,
        uint amountAMin,
        uint amountBMin,
        address to,
        uint deadline
    ) external returns (uint amountA, uint amountB);
    function removeLiquidityETH(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline
    ) external returns (uint amountToken, uint amountETH);
    function removeLiquidityWithPermit(
        address tokenA,
        address tokenB,
        uint liquidity,
        uint amountAMin,
        uint amountBMin,
        address to,
        uint deadline,
        bool approveMax, uint8 v, bytes32 r, bytes32 s
    ) external returns (uint amountA, uint amountB);
    function removeLiquidityETHWithPermit(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline,
        bool approveMax, uint8 v, bytes32 r, bytes32 s
    ) external returns (uint amountToken, uint amountETH);
    function swapExactTokensForTokens(
        uint amountIn,
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external returns (uint[] memory amounts);
    function swapTokensForExactTokens(
        uint amountOut,
        uint amountInMax,
        address[] calldata path,
        address to,
        uint deadline
    ) external returns (uint[] memory amounts);
    function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline)
        external
        payable
        returns (uint[] memory amounts);
    function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline)
        external
        returns (uint[] memory amounts);
    function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline)
        external
        returns (uint[] memory amounts);
    function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline)
        external
        payable
        returns (uint[] memory amounts);

    function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB);
    function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut);
    function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn);
    function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
    function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts);
}

// File: @uniswap/v2-periphery/contracts/interfaces/IUniswapV2Router02.sol

pragma solidity >=0.6.2;

interface IUniswapV2Router02 is IUniswapV2Router01 {
    function removeLiquidityETHSupportingFeeOnTransferTokens(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline
    ) external returns (uint amountETH);
    function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline,
        bool approveMax, uint8 v, bytes32 r, bytes32 s
    ) external returns (uint amountETH);

    function swapExactTokensForTokensSupportingFeeOnTransferTokens(
        uint amountIn,
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external;
    function swapExactETHForTokensSupportingFeeOnTransferTokens(
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external payable;
    function swapExactTokensForETHSupportingFeeOnTransferTokens(
        uint amountIn,
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external;
}

// File: contracts/tokens/EthTreatToken.sol


pragma solidity ^0.8.0;






contract TokenEth is ERC20, Ownable {
    using SafeMath for uint256;

    IUniswapV2Router02 public uniswapV2Router;
    address public uniswapV2Pair;

    uint8 public feeDecimals;
    uint32 public feePercentage;
    uint128 private minTokensBeforeSwap;

    address public treatBridge;
    address payable public treatTreasuryAddress;

    bool inSwapAndLiquify;
    bool swapAndLiquifyEnabled;

    address[] public nontaxedFromContracts;
    mapping(address => bool) public isAddressNotTaxedFrom;
    address[] public nontaxedToContracts;
    mapping(address => bool) public isAddressNotTaxedTo;

    event FeeUpdated(uint8 feeDecimals, uint32 feePercentage);
    event MinTokensBeforeSwapUpdated(uint128 minTokensBeforeSwap);
    event SwapAndLiquifyEnabledUpdated(bool enabled);
    event SwapAndLiquify(
        uint256 tokensSwapped,
        uint256 ethReceived,
        uint256 tokensIntoLiqudity
    );
    event RouterChanged(address newRouter);
    event Taxing(address from, address to, uint256 amount);

    modifier lockTheSwap {
        inSwapAndLiquify = true;
        _;
        inSwapAndLiquify = false;
    }

    modifier onlyBridge() {
        require(msg.sender == treatBridge, "Caller is not the bridge");
        _;
    }

    constructor(
        uint8 _feeDecimals,
        uint32 _feePercentage,
        uint128 _minTokensBeforeSwap,
        bool _swapAndLiquifyEnabled,
        address payable _treasuryAddress
    ) ERC20("Treat", "Treat") {        
        // Create a uniswap pair for this new token
        treatTreasuryAddress = _treasuryAddress;

        updateFee(_feeDecimals, _feePercentage);
        updateMinTokensBeforeSwap(_minTokensBeforeSwap);
        updateSwapAndLiquifyEnabled(_swapAndLiquifyEnabled);
    }

    function initializeUniswapFactory(IUniswapV2Router02 _uniswapV2Router) public onlyOwner {
        uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory())
            .createPair(address(this), _uniswapV2Router.WETH());

        // set the rest of the contract variables
        uniswapV2Router = _uniswapV2Router;

    }

    /*
        override the internal _transfer function so that we can
        take the fee, and conditionally do the swap + liquditiy
    */
    function _transfer(
        address from,
        address to,
        uint256 amount
    ) internal override {
        // is the token balance of this contract address over the min number of
        // tokens that we need to initiate a swap + liquidity lock?
        // also, don't get caught in a circular liquidity event.
        // also, don't swap & liquify if sender is uniswap pair.
        uint256 contractTokenBalance = balanceOf(address(this));
        bool overMinTokenBalance = contractTokenBalance >= minTokensBeforeSwap;
        if (
            overMinTokenBalance &&
            !inSwapAndLiquify &&
            msg.sender != uniswapV2Pair &&
            swapAndLiquifyEnabled
        ) {
            swapAndLiquify(contractTokenBalance);
        }

        // calculate the number of tokens to take as a fee
        uint256 tokensToLock = calculateTokenFee(
            amount,
            feeDecimals,
            feePercentage,
            from,
            to
        );

        // take the fee and send those tokens to this contract address
        // and then send the remainder of tokens to original recipient
        uint256 tokensToTransfer = amount.sub(tokensToLock);

        if(tokensToLock > 0) {
            super._transfer(from, address(this), tokensToLock.div(2));
            super._transfer(from, treatTreasuryAddress, tokensToLock.div(2));
        }
        super._transfer(from, to, tokensToTransfer);
    }

    function swapAndLiquify(uint256 contractTokenBalance) private lockTheSwap {
        // split the contract balance into halves
        uint256 half = contractTokenBalance.div(2);
        uint256 otherHalf = contractTokenBalance.sub(half);

        // capture the contract's current ETH balance.
        // this is so that we can capture exactly the amount of ETH that the
        // swap creates, and not make the liquidity event include any ETH that
        // has been manually sent to the contract
        uint256 initialBalance = address(this).balance;

        // swap tokens for ETH
        swapTokensForEth(half); // <- this breaks the ETH -> TreatDao swap when swap+liquify is triggered

        // how much ETH did we just swap into?
        uint256 newBalance = address(this).balance.sub(initialBalance);

        // add liquidity to pancakeswap
        addLiquidity(otherHalf, newBalance);

        emit SwapAndLiquify(half, newBalance, otherHalf);
    }

    function swapTokensForEth(uint256 tokenAmount) private {
        // generate the pancakeswap pair path of token -> weth
        address[] memory path = new address[](2);
        path[0] = address(this);
        path[1] = uniswapV2Router.WETH();

        _approve(address(this), address(uniswapV2Router), tokenAmount);

        // make the swap
        uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
            tokenAmount,
            0, // accept any amount of ETH
            path,
            address(this),
            block.timestamp
        );
    }

    function addLiquidity(uint256 tokenAmount, uint256 ethAmount) private {
        // approve token transfer to cover all possible scenarios
        _approve(address(this), address(uniswapV2Router), tokenAmount);

        // add the liquidity
        uniswapV2Router.addLiquidityETH{value: ethAmount}(
            address(this),
            tokenAmount,
            0, // slippage is unavoidable
            0, // slippage is unavoidable
            address(this),
            block.timestamp
        );
    }

    function calculateTokenFee(
        uint256 _amount,
        uint8 _feeDecimals,
        uint32 _feePercentage,
        address _from,
        address _to
    ) public view returns (uint256 locked) {
        bool isTaxed = true;
        if(isAddressNotTaxedFrom[_from]) {
            isTaxed = false;
        }
        if(isAddressNotTaxedTo[_to]) {
            isTaxed = false;
        }
        if(!isTaxed) {
            return 0;
        }
        locked = _amount.mul(_feePercentage).div(
            10**(uint256(_feeDecimals) + 2)
        );
    }

    function addNonTaxedToContract(address nontaxed) public onlyOwner {
        bool isAddedAlready = false;
        for(uint i=0; i< nontaxedToContracts.length; i++) {
            if(nontaxedToContracts[i] == nontaxed) {
                isAddedAlready = true;
            }
        }
        require(!isAddedAlready, "Address is already not taxed when sending to");
        nontaxedToContracts.push(nontaxed);
        isAddressNotTaxedTo[nontaxed] = true;
    }

    function addNonTaxedFromContract(address nontaxed) public onlyOwner {
        bool isAddedAlready = false;
        for(uint i=0; i< nontaxedFromContracts.length; i++) {
            if(nontaxedFromContracts[i] == nontaxed) {
                isAddedAlready = true;
            }
        }
        require(!isAddedAlready, "Address is already not taxed when sending from");
        nontaxedFromContracts.push(nontaxed);
        isAddressNotTaxedFrom[nontaxed] = true;
    }

    function removeNonTaxedToContract(address taxed) public onlyOwner {
        for (uint256 i=0; i < nontaxedToContracts.length; i++) {
            if(nontaxedToContracts[i] == taxed) {
                nontaxedToContracts[i] = nontaxedToContracts[nontaxedToContracts.length - 1];
                nontaxedToContracts.pop();
                isAddressNotTaxedTo[taxed] = false;
            }
        }
    }

    function removeNonTaxedFromContract(address taxed) public onlyOwner {
        for (uint256 i=0; i < nontaxedFromContracts.length; i++) {
            if(nontaxedFromContracts[i] == taxed) {
                nontaxedFromContracts[i] = nontaxedFromContracts[nontaxedFromContracts.length - 1];
                nontaxedFromContracts.pop();
                isAddressNotTaxedFrom[taxed] = false;
            }
        }
    }

    receive() external payable {}

    /**
     *
     * @dev burn and mint functions
     */
    function mint(address account, uint256 amount) public onlyBridge {
        _mint(account, amount);
    }

    function burn(address account, uint256 amount) public onlyBridge {
        _burn(account, amount);
    }

    ///
    /// Ownership adjustments
    ///
    function setRouter(address _uniswapRouter) public onlyOwner {
        uniswapV2Router = IUniswapV2Router02(_uniswapRouter);
        emit RouterChanged(_uniswapRouter);
    }

    function setBridge(address _treatBridge) public onlyOwner {
        treatBridge = _treatBridge;
    }

    function updateFee(uint8 _feeDecimals, uint32 _feePercentage) public onlyOwner {
        feeDecimals = _feeDecimals;
        feePercentage = _feePercentage;
        emit FeeUpdated(_feeDecimals, _feePercentage);
    }

    function updateMinTokensBeforeSwap(uint128 _minTokensBeforeSwap) public onlyOwner {
        minTokensBeforeSwap = _minTokensBeforeSwap;
        emit MinTokensBeforeSwapUpdated(_minTokensBeforeSwap);
    }

    function updateSwapAndLiquifyEnabled(bool _enabled) public onlyOwner {
        swapAndLiquifyEnabled = _enabled;
        emit SwapAndLiquifyEnabledUpdated(_enabled);
    }
    
    function withdrawAll(address _tokenAddress, address payable _to) public onlyOwner {
        uint balance = IERC20(_tokenAddress).balanceOf(address(this));
        IERC20(_tokenAddress).transfer(_to, balance);
    }

    function withdrawTokens(address _token,address _to,uint256 _amount) public onlyOwner {
        IUniswapV2ERC20 token = IUniswapV2ERC20(_token);
        token.transfer(_to, _amount);
    }

    function withdrawEther(address payable _to, uint256 _amount) public onlyOwner {
        _to.transfer(_amount);
    }
    
    function harvestTreats(address payable _to) public onlyOwner {
        _to.transfer(address(this).balance);
    }

    function treasury(address payable _treatTreasuryAddress) public onlyOwner {
        require(_treatTreasuryAddress != address(0), "cannot switch treasury to the zero address");
        treatTreasuryAddress = _treatTreasuryAddress;
    }

    function setPair(address _pairAddress) public onlyOwner {
        uniswapV2Pair = _pairAddress;
    }


}

// File: @openzeppelin/contracts/token/ERC20/extensions/ERC20Burnable.sol

// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC20/extensions/ERC20Burnable.sol)

pragma solidity ^0.8.0;


/**
 * @dev Extension of {ERC20} that allows token holders to destroy both their own
 * tokens and those that they have an allowance for, in a way that can be
 * recognized off-chain (via event analysis).
 */
abstract contract ERC20Burnable is Context, ERC20 {
    /**
     * @dev Destroys `amount` tokens from the caller.
     *
     * See {ERC20-_burn}.
     */
    function burn(uint256 amount) public virtual {
        _burn(_msgSender(), amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, deducting from the caller's
     * allowance.
     *
     * See {ERC20-_burn} and {ERC20-allowance}.
     *
     * Requirements:
     *
     * - the caller must have allowance for ``accounts``'s tokens of at least
     * `amount`.
     */
    function burnFrom(address account, uint256 amount) public virtual {
        _spendAllowance(account, _msgSender(), amount);
        _burn(account, amount);
    }
}

// File: contracts/trustless/BridgeEth.sol

pragma solidity ^0.8.0;




contract BridgeEth is TreatBridge {
    using SafeMath for uint256;

    TokenEth public ethToken;
    
    constructor(address payable _token) TreatBridge(_token) {
        // Ensure that the _token address is not zero
        require(_token != address(0), "Bridge: token address cannot be 0");
        
        ethToken = TokenEth(_token);
        // set fee to 0.0018 ether
        _fee = 1800000000000000;
    }

    function setEthToken(address payable _token) external onlyOwner {
        // Ensure that the _token address is not zero
        require(_token != address(0), "Bridge: token address cannot be 0");
        
        ethToken = TokenEth(_token);
    }

    function burn(uint256 amount) payable external returns(bool) {
        require(amount > 0, "Bridge: amount must be greater than zero");
        require(msg.value >= _fee, "Bridge: insufficient fee");
        
        // transfer _fee to bridge controller
        payable(controller).transfer(_fee);
        ethToken.burn(msg.sender, amount);

        // Get the percentage value for the tax
        uint256 taxAmount = amount.mul(_tax).div(100);
        // Ensure tax amount is not greater than the max tax value
        if(taxAmount > _taxMaxValue) {
            taxAmount = _taxMaxValue;
        }

        uint256 amountAfterTax = amount.sub(taxAmount);
    
        emit Transfer(
            msg.sender,
            address(this),
            amountAfterTax,
            block.timestamp,
            Step.Burn
        );
        return true;
    }

    function mint(address account, uint256 amount) external onlyController returns(bool) {
        require(account != address(0), "Bridge: mint to the zero address");
        require(msg.sender != address(this), "Bridge: mint to the bridge");


        ethToken.mint(account, amount);
        emit Transfer(
            address(this),
            account,
            amount,
            block.timestamp,
            Step.Mint
        );
        return true;
    }


}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"address payable","name":"_token","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousBridge","type":"address"},{"indexed":true,"internalType":"address","name":"newBridge","type":"address"}],"name":"ControllerChanged","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"account","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"Deposit","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"from","type":"address"},{"indexed":false,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"date","type":"uint256"},{"indexed":true,"internalType":"enum TreatBridge.Step","name":"step","type":"uint8"}],"name":"Transfer","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"account","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"Withdraw","type":"event"},{"inputs":[],"name":"_balance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"_fee","outputs":[{"internalType":"uint128","name":"","type":"uint128"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"_tax","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"_taxMaxValue","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"acceptOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"burn","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"payable","type":"function"},{"inputs":[],"name":"controller","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"deposit","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"ethToken","outputs":[{"internalType":"contract TokenEth","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"lock","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"mint","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"pendingOwner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_bridge","type":"address"}],"name":"setController","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address payable","name":"_token","type":"address"}],"name":"setEthToken","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint128","name":"fee","type":"uint128"}],"name":"setFee","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"tax","type":"uint256"}],"name":"setTax","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"taxMaxValue","type":"uint256"}],"name":"setTaxMaxValue","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_token","type":"address"}],"name":"setToken","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"token","outputs":[{"internalType":"contract TokenBase","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_pendingOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"unlock","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"withdraw","outputs":[],"stateMutability":"nonpayable","type":"function"},{"stateMutability":"payable","type":"receive"}]

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

000000000000000000000000bcee578e9b5a0f4d19e8d35e628faae293bbce80

-----Decoded View---------------
Arg [0] : _token (address): 0xbCEe578E9B5a0f4d19e8d35E628fAAE293BbcE80

-----Encoded View---------------
1 Constructor Arguments found :
Arg [0] : 000000000000000000000000bcee578e9b5a0f4d19e8d35e628faae293bbce80

52790:2061:0:-:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;28048:108;;;;;;;;;;-1:-1:-1;28048:108:0;;;;;:::i;:::-;;:::i;:::-;;28895:361;;;;;;;;;;-1:-1:-1;28895:361:0;;;;;:::i;:::-;;:::i;28164:78::-;;;;;;;;;;-1:-1:-1;28164:78:0;;;;;:::i;:::-;;:::i;27409:77::-;;;;;;;;;;-1:-1:-1;27409:77:0;;;;;:::i;:::-;;:::i;54370:474::-;;;;;;;;;;-1:-1:-1;54370:474:0;;;;;:::i;:::-;;:::i;:::-;;;1378:14:1;;1371:22;1353:41;;1341:2;1326:18;54370:474:0;;;;;;;;53485:877;;;;;;:::i;:::-;;:::i;28250:110::-;;;;;;;;;;-1:-1:-1;28250:110:0;;;;;:::i;:::-;;:::i;26156:23::-;;;;;;;;;;;;;;;;;;;1551:25:1;;;1539:2;1524:18;26156:23:0;1405:177:1;53225:252:0;;;;;;;;;;-1:-1:-1;53225:252:0;;;;;:::i;:::-;;:::i;27779:261::-;;;;;;;;;;;;;:::i;52866:24::-;;;;;;;;;;-1:-1:-1;52866:24:0;;;;-1:-1:-1;;;;;52866:24:0;;;;;;-1:-1:-1;;;;;2036:32:1;;;2018:51;;2006:2;1991:18;52866:24:0;1847:228:1;29264:632:0;;;;;;;;;;-1:-1:-1;29264:632:0;;;;;:::i;:::-;;:::i;26030:20::-;;;;;;;;;;-1:-1:-1;26030:20:0;;;;-1:-1:-1;;;;;26030:20:0;;;27495:152;;;;;;;;;;-1:-1:-1;27495:152:0;;;;;:::i;:::-;;:::i;28368:519::-;;;;;;;;;;-1:-1:-1;28368:519:0;;;;;:::i;:::-;;:::i;26246:19::-;;;;;;;;;;-1:-1:-1;26246:19:0;;;;-1:-1:-1;;;;;26246:19:0;;;;;;-1:-1:-1;;;;;2452:47:1;;;2434:66;;2422:2;2407:18;26246:19:0;2288:218:1;29904:1107:0;;;;;;:::i;:::-;;:::i;26057:27::-;;;;;;;;;;-1:-1:-1;26057:27:0;;;;-1:-1:-1;;;;;26057:27:0;;;26212;;;;;;;;;;;;;;;;26186:19;;;;;;;;;;;;;;;;27655:116;;;;;;;;;;-1:-1:-1;27655:116:0;;;;;:::i;:::-;;:::i;26091:25::-;;;;;;;;;;-1:-1:-1;26091:25:0;;;;-1:-1:-1;;;;;26091:25:0;;;26127:22;;;;;;;;;;-1:-1:-1;26127:22:0;;;;-1:-1:-1;;;;;26127:22:0;;;28048:108;26859:5;;-1:-1:-1;;;;;26859:5:0;26845:10;:19;26837:67;;;;-1:-1:-1;;;26837:67:0;;;;;;;:::i;:::-;;;;;;;;;28113:5:::1;:25:::0;;-1:-1:-1;;;;;;28113:25:0::1;-1:-1:-1::0;;;;;28113:25:0;;;::::1;::::0;;;::::1;::::0;;28048:108::o;28895:361::-;26859:5;;-1:-1:-1;;;;;26859:5:0;26845:10;:19;26837:67;;;;-1:-1:-1;;;26837:67:0;;;;;;;:::i;:::-;29019:5:::1;::::0;:30:::1;::::0;-1:-1:-1;;;29019:30:0;;29043:4:::1;29019:30;::::0;::::1;2018:51:1::0;29053:7:0;;-1:-1:-1;;;;;29019:5:0::1;::::0;:15:::1;::::0;1991:18:1;;29019:30:0::1;;;;;;;;;;;;;;;;;::::0;::::1;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;:41;;29011:99;;;::::0;-1:-1:-1;;;29011:99:0;;3532:2:1;29011:99:0::1;::::0;::::1;3514:21:1::0;3571:2;3551:18;;;3544:30;3610:34;3590:18;;;3583:62;-1:-1:-1;;;3661:18:1;;;3654:43;3714:19;;29011:99:0::1;3330:409:1::0;29011:99:0::1;29123:5;::::0;:35:::1;::::0;-1:-1:-1;;;29123:35:0;;29138:10:::1;29123:35;::::0;::::1;3918:51:1::0;3985:18;;;3978:34;;;-1:-1:-1;;;;;29123:5:0;;::::1;::::0;:14:::1;::::0;3891:18:1;;29123:35:0::1;;;;;;;;;;;;;;;;;;::::0;::::1;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;-1:-1:-1::0;29180:8:0::1;::::0;:21:::1;::::0;29193:7;29180:12:::1;:21::i;:::-;29169:8;:32:::0;29219:29:::1;::::0;1551:25:1;;;29228:10:0::1;::::0;29219:29:::1;::::0;1539:2:1;1524:18;29219:29:0::1;;;;;;;;28895:361:::0;:::o;28164:78::-;26859:5;;-1:-1:-1;;;;;26859:5:0;26845:10;:19;26837:67;;;;-1:-1:-1;;;26837:67:0;;;;;;;:::i;:::-;28224:4:::1;:10:::0;28164:78::o;27409:77::-;26859:5;;-1:-1:-1;;;;;26859:5:0;26845:10;:19;26837:67;;;;-1:-1:-1;;;26837:67:0;;;;;;;:::i;:::-;27468:4:::1;:10:::0;;-1:-1:-1;;27468:10:0::1;-1:-1:-1::0;;;;;27468:10:0;;;::::1;::::0;;;::::1;::::0;;27409:77::o;54370:474::-;26966:10;;54449:4;;-1:-1:-1;;;;;26966:10:0;26952;:24;26944:74;;;;-1:-1:-1;;;26944:74:0;;;;;;;:::i;:::-;-1:-1:-1;;;;;54474:21:0;::::1;54466:66;;;::::0;-1:-1:-1;;;54466:66:0;;4913:2:1;54466:66:0::1;::::0;::::1;4895:21:1::0;;;4932:18;;;4925:30;4991:34;4971:18;;;4964:62;5043:18;;54466:66:0::1;4711:356:1::0;54466:66:0::1;54573:4;54551:10;:27:::0;54543:66:::1;;;::::0;-1:-1:-1;;;54543:66:0;;5274:2:1;54543:66:0::1;::::0;::::1;5256:21:1::0;5313:2;5293:18;;;5286:30;5352:28;5332:18;;;5325:56;5398:18;;54543:66:0::1;5072:350:1::0;54543:66:0::1;54624:8;::::0;:30:::1;::::0;-1:-1:-1;;;54624:30:0;;-1:-1:-1;;;;;3936:32:1;;;54624:30:0::1;::::0;::::1;3918:51:1::0;3985:18;;;3978:34;;;54624:8:0;;::::1;::::0;:13:::1;::::0;3891:18:1;;54624:30:0::1;;;;;;;;;;;;;;;;;::::0;::::1;;;;;;;;;;;;::::0;::::1;;;;;-1:-1:-1::0;54794:9:0::1;::::0;-1:-1:-1;54670:144:0::1;::::0;-1:-1:-1;;54670:144:0;::::1;;::::0;;54701:4:::1;5828:34:1::0;;-1:-1:-1;;;;;5898:15:1;;5893:2;5878:18;;5871:43;5930:18;;;5923:34;;;54764:15:0::1;5988:2:1::0;5973:18;;5966:34;54670:144:0::1;::::0;5777:3:1;5762:19;54670:144:0::1;;;;;;;-1:-1:-1::0;54832:4:0::1;27020:1;54370:474:::0;;;;:::o;53485:877::-;53540:4;53574:1;53565:6;:10;53557:63;;;;-1:-1:-1;;;53557:63:0;;6213:2:1;53557:63:0;;;6195:21:1;6252:2;6232:18;;;6225:30;6291:34;6271:18;;;6264:62;-1:-1:-1;;;6342:18:1;;;6335:38;6390:19;;53557:63:0;6011:404:1;53557:63:0;53652:4;;-1:-1:-1;;;;;53652:4:0;53639:9;:17;;53631:54;;;;-1:-1:-1;;;53631:54:0;;6622:2:1;53631:54:0;;;6604:21:1;6661:2;6641:18;;;6634:30;-1:-1:-1;;;6680:18:1;;;6673:54;6744:18;;53631:54:0;6420:348:1;53631:54:0;53761:10;;53782:4;;53753:34;;-1:-1:-1;;;;;53761:10:0;;;;-1:-1:-1;;;;;53782:4:0;;;53753:34;;;;;53761:10;53753:34;53761:10;53753:34;53782:4;53761:10;53753:34;;;;;;;;;;;;;;;;;;;;-1:-1:-1;53798:8:0;;:33;;-1:-1:-1;;;53798:33:0;;53812:10;53798:33;;;3918:51:1;3985:18;;;3978:34;;;-1:-1:-1;;;;;53798:8:0;;;;:13;;3891:18:1;;53798:33:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;53893:17;53913:25;53934:3;53913:16;53924:4;;53913:6;:10;;:16;;;;:::i;:::-;:20;;:25::i;:::-;53893:45;;54032:12;;54020:9;:24;54017:80;;;-1:-1:-1;54073:12:0;;54017:80;54109:22;54134:21;:6;54145:9;54134:10;:21::i;:::-;54177:155;;;54200:10;5828:34:1;;54233:4:0;5893:2:1;5878:18;;5871:43;5930:18;;;5923:34;;;54282:15:0;5988:2:1;5973:18;;5966:34;54109:46:0;;-1:-1:-1;54312:9:0;;54177:155;;5777:3:1;5762:19;54177:155:0;;;;;;;-1:-1:-1;54350:4:0;;53485:877;-1:-1:-1;;;53485:877:0:o;28250:110::-;26859:5;;-1:-1:-1;;;;;26859:5:0;26845:10;:19;26837:67;;;;-1:-1:-1;;;26837:67:0;;;;;;;:::i;:::-;28326:12:::1;:26:::0;28250:110::o;53225:252::-;26859:5;;-1:-1:-1;;;;;26859:5:0;26845:10;:19;26837:67;;;;-1:-1:-1;;;26837:67:0;;;;;;;:::i;:::-;-1:-1:-1;;;;;53363:20:0;::::1;53355:66;;;::::0;-1:-1:-1;;;53355:66:0;;6975:2:1;53355:66:0::1;::::0;::::1;6957:21:1::0;7014:2;6994:18;;;6987:30;7053:34;7033:18;;;7026:62;-1:-1:-1;;;7104:18:1;;;7097:31;7145:19;;53355:66:0::1;6773:397:1::0;53355:66:0::1;53442:8;:27:::0;;-1:-1:-1;;;;;;53442:27:0::1;-1:-1:-1::0;;;;;53442:27:0;;;::::1;::::0;;;::::1;::::0;;53225:252::o;27779:261::-;27848:12;;-1:-1:-1;;;;;27848:12:0;27834:10;:26;27826:82;;;;-1:-1:-1;;;27826:82:0;;7377:2:1;27826:82:0;;;7359:21:1;7416:2;7396:18;;;7389:30;7455:34;7435:18;;;7428:62;-1:-1:-1;;;7506:18:1;;;7499:41;7557:19;;27826:82:0;7175:407:1;27826:82:0;27952:12;;;27945:5;;27924:41;;-1:-1:-1;;;;;27952:12:0;;;;27945:5;;;;27924:41;;;27984:12;;;;27976:20;;-1:-1:-1;;;;;;27976:20:0;;;-1:-1:-1;;;;;27984:12:0;;27976:20;;;;28007:25;;;27779:261::o;29264:632::-;26966:10;;29354:4;;-1:-1:-1;;;;;26966:10:0;26952;:24;26944:74;;;;-1:-1:-1;;;26944:74:0;;;;;;;:::i;:::-;-1:-1:-1;;;;;29379:21:0;::::1;29371:66;;;::::0;-1:-1:-1;;;29371:66:0;;4913:2:1;29371:66:0::1;::::0;::::1;4895:21:1::0;;;4932:18;;;4925:30;4991:34;4971:18;;;4964:62;5043:18;;29371:66:0::1;4711:356:1::0;29371:66:0::1;29507:5;::::0;:30:::1;::::0;-1:-1:-1;;;29507:30:0;;29531:4:::1;29507:30;::::0;::::1;2018:51:1::0;29541:6:0;;-1:-1:-1;;;;;29507:5:0::1;::::0;:15:::1;::::0;1991:18:1;;29507:30:0::1;;;;;;;;;;;;;;;;;::::0;::::1;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;:40;;29499:90;;;::::0;-1:-1:-1;;;29499:90:0;;7789:2:1;29499:90:0::1;::::0;::::1;7771:21:1::0;7828:2;7808:18;;;7801:30;7867:34;7847:18;;;7840:62;-1:-1:-1;;;7918:18:1;;;7911:35;7963:19;;29499:90:0::1;7587:401:1::0;29499:90:0::1;29617:8;::::0;:20:::1;::::0;29630:6;29617:12:::1;:20::i;:::-;29606:8;:31:::0;;;29648:5:::1;::::0;:31:::1;::::0;-1:-1:-1;;;29648:31:0;;-1:-1:-1;;;;;3936:32:1;;;29648:31:0;;::::1;3918:51:1::0;;;;3985:18;;;3978:34;;;29648:5:0;::::1;::::0;:14:::1;::::0;3891:18:1;;29648:31:0::1;;;;;;;;;;;;;;;;;;::::0;::::1;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;-1:-1:-1::0;29830:9:0::1;29706:158;::::0;27495:152;26859:5;;-1:-1:-1;;;;;26859:5:0;26845:10;:19;26837:67;;;;-1:-1:-1;;;26837:67:0;;;;;;;:::i;:::-;27565:10:::1;:20:::0;;-1:-1:-1;;;;;;27565:20:0::1;-1:-1:-1::0;;;;;27565:20:0;::::1;::::0;;::::1;::::0;;;27601:38:::1;::::0;27565:20;;27601:38:::1;::::0;-1:-1:-1;;27601:38:0::1;27495:152:::0;:::o;28368:519::-;26859:5;;-1:-1:-1;;;;;26859:5:0;26845:10;:19;26837:67;;;;-1:-1:-1;;;26837:67:0;;;;;;;:::i;:::-;28511:5:::1;::::0;:42:::1;::::0;-1:-1:-1;;;28511:42:0;;28527:10:::1;28511:42;::::0;::::1;8205:34:1::0;28547:4:0::1;8255:18:1::0;;;8248:43;28557:7:0;;-1:-1:-1;;;;;28511:5:0::1;::::0;:15:::1;::::0;8140:18:1;;28511:42:0::1;;;;;;;;;;;;;;;;;::::0;::::1;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;:53;;28503:112;;;::::0;-1:-1:-1;;;28503:112:0;;8504:2:1;28503:112:0::1;::::0;::::1;8486:21:1::0;8543:2;8523:18;;;8516:30;8582:34;8562:18;;;8555:62;-1:-1:-1;;;8633:18:1;;;8626:44;8687:19;;28503:112:0::1;8302:410:1::0;28503:112:0::1;28634:5;::::0;:27:::1;::::0;-1:-1:-1;;;28634:27:0;;28650:10:::1;28634:27;::::0;::::1;2018:51:1::0;28665:7:0;;-1:-1:-1;;;;;28634:5:0::1;::::0;:15:::1;::::0;1991:18:1;;28634:27:0::1;;;;;;;;;;;;;;;;;::::0;::::1;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;:38;;28626:95;;;::::0;-1:-1:-1;;;28626:95:0;;8919:2:1;28626:95:0::1;::::0;::::1;8901:21:1::0;8958:2;8938:18;;;8931:30;8997:34;8977:18;;;8970:62;-1:-1:-1;;;9048:18:1;;;9041:42;9100:19;;28626:95:0::1;8717:408:1::0;28626:95:0::1;28734:5;::::0;:54:::1;::::0;-1:-1:-1;;;28734:54:0;;28753:10:::1;28734:54;::::0;::::1;9370:34:1::0;28773:4:0::1;9420:18:1::0;;;9413:43;9472:18;;;9465:34;;;-1:-1:-1;;;;;28734:5:0;;::::1;::::0;:18:::1;::::0;9305::1;;28734:54:0::1;;;;;;;;;;;;;;;;;;::::0;::::1;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;-1:-1:-1::0;28810:8:0::1;::::0;:21:::1;::::0;28823:7;28810:12:::1;:21::i;:::-;28799:8;:32:::0;28849:28:::1;::::0;1551:25:1;;;28857:10:0::1;::::0;28849:28:::1;::::0;1539:2:1;1524:18;28849:28:0::1;1405:177:1::0;29904:1107:0;29985:5;;:42;;-1:-1:-1;;;29985:42:0;;30001:10;29985:42;;;8205:34:1;30021:4:0;8255:18:1;;;8248:43;29960:4:0;;30031:6;;-1:-1:-1;;;;;29985:5:0;;;;:15;;8140:18:1;;29985:42:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;:52;;29977:105;;;;-1:-1:-1;;;29977:105:0;;9712:2:1;29977:105:0;;;9694:21:1;9751:2;9731:18;;;9724:30;9790:34;9770:18;;;9763:62;-1:-1:-1;;;9841:18:1;;;9834:38;9889:19;;29977:105:0;9510:404:1;29977:105:0;30101:5;;:27;;-1:-1:-1;;;30101:27:0;;30117:10;30101:27;;;2018:51:1;30132:6:0;;-1:-1:-1;;;;;30101:5:0;;:15;;1991:18:1;;30101:27:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;:37;;30093:88;;;;-1:-1:-1;;;30093:88:0;;10121:2:1;30093:88:0;;;10103:21:1;10160:2;10140:18;;;10133:30;10199:34;10179:18;;;10172:62;-1:-1:-1;;;10250:18:1;;;10243:36;10296:19;;30093:88:0;9919:402:1;30093:88:0;30249:4;;-1:-1:-1;;;;;30249:4:0;30236:9;:17;;30228:54;;;;-1:-1:-1;;;30228:54:0;;6622:2:1;30228:54:0;;;6604:21:1;6661:2;6641:18;;;6634:30;-1:-1:-1;;;6680:18:1;;;6673:54;6744:18;;30228:54:0;6420:348:1;30228:54:0;30307:5;;:53;;-1:-1:-1;;;30307:53:0;;30326:10;30307:53;;;9370:34:1;30346:4:0;9420:18:1;;;9413:43;9472:18;;;9465:34;;;-1:-1:-1;;;;;30307:5:0;;;;:18;;9305::1;;30307:53:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;-1:-1:-1;30382:8:0;;:20;;30395:6;30382:12;:20::i;:::-;30371:8;:31;30423:10;;30444:4;;30415:34;;-1:-1:-1;;;;;30423:10:0;;;;-1:-1:-1;;;;;30444:4:0;;;30415:34;;;;;30423:10;30415:34;30423:10;30415:34;30444:4;30423:10;30415:34;;;;;;;;;;;;;;;;;;;;;30544:17;30564:25;30585:3;30564:16;30575:4;;30564:6;:10;;:16;;;;:::i;27655:116::-;26859:5;;-1:-1:-1;;;;;26859:5:0;26845:10;:19;26837:67;;;;-1:-1:-1;;;26837:67:0;;;;;;;:::i;:::-;27735:12:::1;:28:::0;;-1:-1:-1;;;;;;27735:28:0::1;-1:-1:-1::0;;;;;27735:28:0;;;::::1;::::0;;;::::1;::::0;;27655:116::o;3253:98::-;3311:7;3338:5;3342:1;3338;:5;:::i;:::-;3331:12;3253:98;-1:-1:-1;;;3253:98:0:o;3610:::-;3668:7;3695:5;3699:1;3695;:5;:::i;4009:98::-;4067:7;4094:5;4098:1;4094;:5;:::i;2872:98::-;2930:7;2957:5;2961:1;2957;:5;:::i;14:131:1:-;-1:-1:-1;;;;;89:31:1;;79:42;;69:70;;135:1;132;125:12;69:70;14:131;:::o;150:247::-;209:6;262:2;250:9;241:7;237:23;233:32;230:52;;;278:1;275;268:12;230:52;317:9;304:23;336:31;361:5;336:31;:::i;402:180::-;461:6;514:2;502:9;493:7;489:23;485:32;482:52;;;530:1;527;520:12;482:52;-1:-1:-1;553:23:1;;402:180;-1:-1:-1;402:180:1:o;587:301::-;646:6;699:2;687:9;678:7;674:23;670:32;667:52;;;715:1;712;705:12;667:52;754:9;741:23;-1:-1:-1;;;;;797:5:1;793:46;786:5;783:57;773:85;;854:1;851;844:12;893:315;961:6;969;1022:2;1010:9;1001:7;997:23;993:32;990:52;;;1038:1;1035;1028:12;990:52;1077:9;1064:23;1096:31;1121:5;1096:31;:::i;:::-;1146:5;1198:2;1183:18;;;;1170:32;;-1:-1:-1;;;893:315:1:o;2737:399::-;2939:2;2921:21;;;2978:2;2958:18;;;2951:30;3017:34;3012:2;2997:18;;2990:62;-1:-1:-1;;;3083:2:1;3068:18;;3061:33;3126:3;3111:19;;2737:399::o;3141:184::-;3211:6;3264:2;3252:9;3243:7;3239:23;3235:32;3232:52;;;3280:1;3277;3270:12;3232:52;-1:-1:-1;3303:16:1;;3141:184;-1:-1:-1;3141:184:1:o;4023:277::-;4090:6;4143:2;4131:9;4122:7;4118:23;4114:32;4111:52;;;4159:1;4156;4149:12;4111:52;4191:9;4185:16;4244:5;4237:13;4230:21;4223:5;4220:32;4210:60;;4266:1;4263;4256:12;4305:401;4507:2;4489:21;;;4546:2;4526:18;;;4519:30;4585:34;4580:2;4565:18;;4558:62;-1:-1:-1;;;4651:2:1;4636:18;;4629:35;4696:3;4681:19;;4305:401::o;10326:127::-;10387:10;10382:3;10378:20;10375:1;10368:31;10418:4;10415:1;10408:15;10442:4;10439:1;10432:15;10458:128;10525:9;;;10546:11;;;10543:37;;;10560:18;;:::i;10591:168::-;10664:9;;;10695;;10712:15;;;10706:22;;10692:37;10682:71;;10733:18;;:::i;10764:217::-;10804:1;10830;10820:132;;10874:10;10869:3;10865:20;10862:1;10855:31;10909:4;10906:1;10899:15;10937:4;10934:1;10927:15;10820:132;-1:-1:-1;10966:9:1;;10764:217::o;10986:125::-;11051:9;;;11072:10;;;11069:36;;;11085:18;;:::i

ipfs://1f379719af910c1ea7c8db3dd309a0eeae29739b6f3e1cbb9955906dd2e6508d