Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

// SPDX-License-Identifier: UNLICENSED
pragma solidity 0.8.20;

import '@openzeppelin/contracts/token/ERC721/IERC721.sol';
import '@openzeppelin/contracts/access/Ownable.sol';
import '@openzeppelin/contracts/utils/cryptography/MerkleProof.sol';
import '@openzeppelin/contracts/utils/math/Math.sol';
import '@openzeppelin/contracts/utils/Pausable.sol';
import './IDelegateRegistry.sol';
import './IDelegationRegistry.sol';

contract GrapePreSale is Ownable, Pausable {
    /**
     * @dev Public immutable state
     */
    IERC721 public immutable grapeNFT;
    uint256 public immutable minimumSpendAmount; // must be in WEI. set by constructor only
    bytes32 public immutable referralCodeMerkleRoot;
    uint256 public immutable referralCapPerBuyer; // must be in WEI. set by constructor only
    uint256 public immutable capPerNFT; // must be in WEI. set by constructor only
    uint256 public immutable nftStartDate;
    uint256 public immutable referralStartDate;
    uint256 public immutable endDate;
    uint256 public immutable nftSaleCap;
    address payable public immutable receiverWallet;
    IDelegateRegistry public immutable delegateRegistryV2 =
        IDelegateRegistry(0x00000000000000447e69651d841bD8D104Bed493);
    IDelegationRegistry public immutable delegateRegistryV1 =
        IDelegationRegistry(0x00000000000076A84feF008CDAbe6409d2FE638B);

    /**
     * @dev Public mutable state
     */
    uint256 public nftSoldSupply = 0; // managed internally
    mapping(uint256 tokenId => uint256 amount) public nftPurchases; // managed internally
    mapping(address buyer => uint256 amount) public referralPurchases; // managed internally

    /**
     * @notice Emitted when a purchase is made with an NFT
     */
    event PurchaseWithNFT(address indexed buyer, uint256 amount);

    /**
     * @notice Emitted when a purchase is made with a referral code
     */
    event PurchaseWithReferralCode(address indexed buyer, uint256 amount);

    /**
     * @dev Errors
     */
    error BelowMinimumSpend();
    error Closed();
    error AmountExceedsSupply();
    error NotTokenOwner(uint256 tokenId);
    error InvalidPaymentAmount();
    error InvalidReferralCode();

    /**
     * @notice Creates a new instance of the GrapePreSale contract.
     * @param grapeNFTAddress_ The address of the ERC721 token (Grape NFT) involved in the pre-sale.
     * @param initialOwner_ The initial owner of the contract, typically the deployer or the main administrative account.
     * @param receiverWallet_ The wallet address where funds (ETH) collected from the pre-sale will be sent.
     * @param referralCodeMerkleRoot_ The root of the Merkle tree used for validating referral codes.
     * @param config_ Array containing the following config in order:
     *        referralCapPerBuyer: The maximum amount of WEI a buyer can spend using referral codes.
     *        capPerNFT: The maximum amount of WEI that can be spent per NFT in the pre-sale.
     *        nftStartDate: The start date of the NFT pre-sale, represented as a Unix timestamp.
     *        referralStartDate: The start date of the referral pre-sale, represented as a Unix timestamp.
     *        endDate: The end date of the pre-sale, represented as a Unix timestamp.
     *        minimumSpendAmount: The minimum amount of WEI that can be spent in the pre-sale.
     *        nftSaleCap: The maximum amount of WEI that can be spend for NFT purchases.
     */
    constructor(
        address grapeNFTAddress_,
        address initialOwner_,
        address payable receiverWallet_,
        bytes32 referralCodeMerkleRoot_,
        uint256[7] memory config_
    ) Ownable(initialOwner_) {
        grapeNFT = IERC721(grapeNFTAddress_);
        receiverWallet = receiverWallet_;
        referralCodeMerkleRoot = referralCodeMerkleRoot_;
        referralCapPerBuyer = config_[0];
        capPerNFT = config_[1];
        nftStartDate = config_[2];
        referralStartDate = config_[3];
        endDate = config_[4];
        minimumSpendAmount = config_[5];
        nftSaleCap = config_[6];
    }

    /**
     * @dev Modifiers
     */

    /**
     * @notice Require the amount to spend to be greater than the minimum spend value
     */
    modifier checkMinimumSpend() {
        if (msg.value < minimumSpendAmount) revert BelowMinimumSpend();
        _;
    }

    /**
     * @dev Public functions
     */

    /**
     * @notice Allows a buyer to purchase with a list of NFTs
     * @dev This function calculates the total amount of Ether sent and ensures it does not exceed the NFT Sale Cap.
     *      It checks each NFT provided, verifies ownership, and calculates the amount included for each NFT.
     *      It reverts if the NFT is not owned by the sender or their delegate, if the NFT Sale Cap is reached,
     *      or if the payment amount is not valid.
     * @param tokenIds_ An array of token IDs which the buyer uses to make the purchase.
     */
    function buyWithNFTs(
        uint256[] calldata tokenIds_
    ) external payable whenNotPaused checkMinimumSpend {
        // check if the nft sale is closed
        if (block.timestamp < nftStartDate || block.timestamp > endDate) {
            revert Closed();
        }

        // calculate new nft sold supply
        uint256 _newNftSoldSupply = nftSoldSupply + msg.value;

        // verify nft sold supply is not greater than the nft sale cap
        if (_newNftSoldSupply > nftSaleCap) {
            revert AmountExceedsSupply();
        }

        // update nft sold supply
        nftSoldSupply = _newNftSoldSupply;

        // track amount included in NFT
        uint256 _amountIncluded = 0;

        // check each provided NFTs
        uint256 _i;
        do {
            uint256 _tokenId = tokenIds_[_i];

            // verify tokenId is owned by sender
            _verifyTokenOwner(_tokenId);

            // grab current NFT purchase amount
            uint256 _nftPurchaseAmount = nftPurchases[_tokenId];

            // calculate how much amount can be used for this NFT
            uint256 _maxAmount = Math.min(
                capPerNFT - _nftPurchaseAmount, // maximum the cap per NFT minus the amount previously purchase with this NFT
                msg.value - _amountIncluded // otherwise the difference between the total amount and the amount already included in other NFT
            );

            // update amount used for this NFT
            nftPurchases[_tokenId] = _nftPurchaseAmount + _maxAmount;

            // increase amount included
            _amountIncluded += _maxAmount;
        } while (++_i < tokenIds_.length && _amountIncluded < msg.value);

        // check amount is fully included across the NFTs
        if (_amountIncluded != msg.value) {
            revert InvalidPaymentAmount();
        }

        // transfer ETH to receiver wallet
        receiverWallet.transfer(_amountIncluded);

        // emit event
        emit PurchaseWithNFT(msg.sender, _amountIncluded);
    }

    /**
     * @notice Allows a buyer to purchase using a referral code.
     * @dev This function allows users to buy with a referral code and ensures purchases per wallet do not exceed the referralCapPerBuyer
     *      It validates the referral code and calculates the total sold per wallet.
     *      It transfers the ETH to the receiver wallet.
     * @param referralCode_ An array of bytes32 representing the referral code used for the purchase.
     */
    function buyWithReferralCode(
        bytes32[] calldata referralCode_
    ) external payable whenNotPaused checkMinimumSpend {
        // check if the referral sale is closed
        if (block.timestamp < referralStartDate || block.timestamp > endDate) {
            revert Closed();
        }

        // verify referral code is valid
        if (!verifyReferralCode(msg.sender, referralCode_)) {
            revert InvalidReferralCode();
        }

        // calculate new referral purchase for this sender
        uint256 _newReferralPurchase = referralPurchases[msg.sender] +
            msg.value;

        // verify amount is not greater than the referral cap per buyer
        if (_newReferralPurchase > referralCapPerBuyer) {
            revert InvalidPaymentAmount();
        }

        // update referral amount bought by sender
        referralPurchases[msg.sender] = _newReferralPurchase;

        // transfer ETH to receiver wallet
        receiverWallet.transfer(msg.value);

        // emit event
        emit PurchaseWithReferralCode(msg.sender, msg.value);
    }

    /**
     * @notice Verifies if a given referral code is valid for a specific wallet address.
     * @dev Uses a Merkle proof to verify if the provided referral code is part of the Merkle tree
     *      represented by the referralCodeMerkleRoot. This is used to validate the authenticity of the referral codes.
     * @param wallet_ The address of the wallet for which the referral code is being verified.
     * @param referralCode_ Merkle Proof to check against.
     * @return bool True if the referral code is valid for the given wallet address, false otherwise.
     */
    function verifyReferralCode(
        address wallet_,
        bytes32[] calldata referralCode_
    ) public view returns (bool) {
        return
            MerkleProof.verify(
                referralCode_,
                referralCodeMerkleRoot,
                keccak256(bytes.concat(keccak256(abi.encode(wallet_))))
            );
    }

    /**
     * @dev Only owner functions
     */

    /**
     * @notice Pause the purchase functions, only owner can call this function
     */
    function pause() external onlyOwner {
        _pause();
    }

    /**
     * @notice Unpause the purchase functions, only owner can call this function
     */
    function unpause() external onlyOwner {
        _unpause();
    }

    /**
     * @dev Internal functions
     */

    /**
     * @notice Verifies if the sender is the owner of a given token or a valid delegate.
     * @dev This internal function checks if the sender is either the owner of the specified token or an authorized delegate.
     *      It supports two versions of delegate checks: a newer version (`dcV2`) and an older one (`dc`).
     *      The function reverts with `NotTokenOwner` if the sender is neither the owner nor a valid delegate.
     * @param tokenId_ The token ID to verify ownership or delegation for.
     */
    function _verifyTokenOwner(uint256 tokenId_) internal view {
        address _tokenOwner = grapeNFT.ownerOf(tokenId_);

        // check sender is owner
        if (_tokenOwner == msg.sender) return;

        // check with delegate registry v2
        if (
            delegateRegistryV2.checkDelegateForERC721(
                msg.sender,
                _tokenOwner,
                address(grapeNFT),
                tokenId_,
                ''
            )
        ) return;

        // check with delegate registry v1
        if (
            delegateRegistryV1.checkDelegateForToken(
                msg.sender,
                _tokenOwner,
                address(grapeNFT),
                tokenId_
            )
        ) return;

        // revert if not owner or delegate
        revert NotTokenOwner(tokenId_);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol)

pragma solidity ^0.8.20;

import {Context} from "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * The initial owner is set to the address provided by the deployer. This can
 * later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    /**
     * @dev The caller account is not authorized to perform an operation.
     */
    error OwnableUnauthorizedAccount(address account);

    /**
     * @dev The owner is not a valid owner account. (eg. `address(0)`)
     */
    error OwnableInvalidOwner(address owner);

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the address provided by the deployer as the initial owner.
     */
    constructor(address initialOwner) {
        if (initialOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(initialOwner);
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        if (owner() != _msgSender()) {
            revert OwnableUnauthorizedAccount(_msgSender());
        }
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby disabling any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        if (newOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/draft-IERC6093.sol)
pragma solidity ^0.8.20;

/**
 * @dev Standard ERC20 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC20 tokens.
 */
interface IERC20Errors {
    /**
     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param balance Current balance for the interacting account.
     * @param needed Minimum amount required to perform a transfer.
     */
    error ERC20InsufficientBalance(address sender, uint256 balance, uint256 needed);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC20InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC20InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `spender`’s `allowance`. Used in transfers.
     * @param spender Address that may be allowed to operate on tokens without being their owner.
     * @param allowance Amount of tokens a `spender` is allowed to operate with.
     * @param needed Minimum amount required to perform a transfer.
     */
    error ERC20InsufficientAllowance(address spender, uint256 allowance, uint256 needed);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC20InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `spender` to be approved. Used in approvals.
     * @param spender Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC20InvalidSpender(address spender);
}

/**
 * @dev Standard ERC721 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC721 tokens.
 */
interface IERC721Errors {
    /**
     * @dev Indicates that an address can't be an owner. For example, `address(0)` is a forbidden owner in EIP-20.
     * Used in balance queries.
     * @param owner Address of the current owner of a token.
     */
    error ERC721InvalidOwner(address owner);

    /**
     * @dev Indicates a `tokenId` whose `owner` is the zero address.
     * @param tokenId Identifier number of a token.
     */
    error ERC721NonexistentToken(uint256 tokenId);

    /**
     * @dev Indicates an error related to the ownership over a particular token. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param tokenId Identifier number of a token.
     * @param owner Address of the current owner of a token.
     */
    error ERC721IncorrectOwner(address sender, uint256 tokenId, address owner);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC721InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC721InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     * @param tokenId Identifier number of a token.
     */
    error ERC721InsufficientApproval(address operator, uint256 tokenId);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC721InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC721InvalidOperator(address operator);
}

/**
 * @dev Standard ERC1155 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC1155 tokens.
 */
interface IERC1155Errors {
    /**
     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param balance Current balance for the interacting account.
     * @param needed Minimum amount required to perform a transfer.
     * @param tokenId Identifier number of a token.
     */
    error ERC1155InsufficientBalance(address sender, uint256 balance, uint256 needed, uint256 tokenId);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC1155InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC1155InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     * @param owner Address of the current owner of a token.
     */
    error ERC1155MissingApprovalForAll(address operator, address owner);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC1155InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC1155InvalidOperator(address operator);

    /**
     * @dev Indicates an array length mismatch between ids and values in a safeBatchTransferFrom operation.
     * Used in batch transfers.
     * @param idsLength Length of the array of token identifiers
     * @param valuesLength Length of the array of token amounts
     */
    error ERC1155InvalidArrayLength(uint256 idsLength, uint256 valuesLength);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC1271.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC1271 standard signature validation method for
 * contracts as defined in https://eips.ethereum.org/EIPS/eip-1271[ERC-1271].
 */
interface IERC1271 {
    /**
     * @dev Should return whether the signature provided is valid for the provided data
     * @param hash      Hash of the data to be signed
     * @param signature Signature byte array associated with _data
     */
    function isValidSignature(bytes32 hash, bytes memory signature) external view returns (bytes4 magicValue);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/ERC20.sol)

pragma solidity ^0.8.20;

import {IERC20} from "./IERC20.sol";
import {IERC20Metadata} from "./extensions/IERC20Metadata.sol";
import {Context} from "../../utils/Context.sol";
import {IERC20Errors} from "../../interfaces/draft-IERC6093.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * The default value of {decimals} is 18. To change this, you should override
 * this function so it returns a different value.
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC20
 * applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 */
abstract contract ERC20 is Context, IERC20, IERC20Metadata, IERC20Errors {
    mapping(address account => uint256) private _balances;

    mapping(address account => mapping(address spender => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the default value returned by this function, unless
     * it's overridden.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual returns (uint8) {
        return 18;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - the caller must have a balance of at least `value`.
     */
    function transfer(address to, uint256 value) public virtual returns (bool) {
        address owner = _msgSender();
        _transfer(owner, to, value);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * NOTE: If `value` is the maximum `uint256`, the allowance is not updated on
     * `transferFrom`. This is semantically equivalent to an infinite approval.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 value) public virtual returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, value);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * NOTE: Does not update the allowance if the current allowance
     * is the maximum `uint256`.
     *
     * Requirements:
     *
     * - `from` and `to` cannot be the zero address.
     * - `from` must have a balance of at least `value`.
     * - the caller must have allowance for ``from``'s tokens of at least
     * `value`.
     */
    function transferFrom(address from, address to, uint256 value) public virtual returns (bool) {
        address spender = _msgSender();
        _spendAllowance(from, spender, value);
        _transfer(from, to, value);
        return true;
    }

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead.
     */
    function _transfer(address from, address to, uint256 value) internal {
        if (from == address(0)) {
            revert ERC20InvalidSender(address(0));
        }
        if (to == address(0)) {
            revert ERC20InvalidReceiver(address(0));
        }
        _update(from, to, value);
    }

    /**
     * @dev Transfers a `value` amount of tokens from `from` to `to`, or alternatively mints (or burns) if `from`
     * (or `to`) is the zero address. All customizations to transfers, mints, and burns should be done by overriding
     * this function.
     *
     * Emits a {Transfer} event.
     */
    function _update(address from, address to, uint256 value) internal virtual {
        if (from == address(0)) {
            // Overflow check required: The rest of the code assumes that totalSupply never overflows
            _totalSupply += value;
        } else {
            uint256 fromBalance = _balances[from];
            if (fromBalance < value) {
                revert ERC20InsufficientBalance(from, fromBalance, value);
            }
            unchecked {
                // Overflow not possible: value <= fromBalance <= totalSupply.
                _balances[from] = fromBalance - value;
            }
        }

        if (to == address(0)) {
            unchecked {
                // Overflow not possible: value <= totalSupply or value <= fromBalance <= totalSupply.
                _totalSupply -= value;
            }
        } else {
            unchecked {
                // Overflow not possible: balance + value is at most totalSupply, which we know fits into a uint256.
                _balances[to] += value;
            }
        }

        emit Transfer(from, to, value);
    }

    /**
     * @dev Creates a `value` amount of tokens and assigns them to `account`, by transferring it from address(0).
     * Relies on the `_update` mechanism
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead.
     */
    function _mint(address account, uint256 value) internal {
        if (account == address(0)) {
            revert ERC20InvalidReceiver(address(0));
        }
        _update(address(0), account, value);
    }

    /**
     * @dev Destroys a `value` amount of tokens from `account`, lowering the total supply.
     * Relies on the `_update` mechanism.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead
     */
    function _burn(address account, uint256 value) internal {
        if (account == address(0)) {
            revert ERC20InvalidSender(address(0));
        }
        _update(account, address(0), value);
    }

    /**
     * @dev Sets `value` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     *
     * Overrides to this logic should be done to the variant with an additional `bool emitEvent` argument.
     */
    function _approve(address owner, address spender, uint256 value) internal {
        _approve(owner, spender, value, true);
    }

    /**
     * @dev Variant of {_approve} with an optional flag to enable or disable the {Approval} event.
     *
     * By default (when calling {_approve}) the flag is set to true. On the other hand, approval changes made by
     * `_spendAllowance` during the `transferFrom` operation set the flag to false. This saves gas by not emitting any
     * `Approval` event during `transferFrom` operations.
     *
     * Anyone who wishes to continue emitting `Approval` events on the`transferFrom` operation can force the flag to
     * true using the following override:
     * ```
     * function _approve(address owner, address spender, uint256 value, bool) internal virtual override {
     *     super._approve(owner, spender, value, true);
     * }
     * ```
     *
     * Requirements are the same as {_approve}.
     */
    function _approve(address owner, address spender, uint256 value, bool emitEvent) internal virtual {
        if (owner == address(0)) {
            revert ERC20InvalidApprover(address(0));
        }
        if (spender == address(0)) {
            revert ERC20InvalidSpender(address(0));
        }
        _allowances[owner][spender] = value;
        if (emitEvent) {
            emit Approval(owner, spender, value);
        }
    }

    /**
     * @dev Updates `owner` s allowance for `spender` based on spent `value`.
     *
     * Does not update the allowance value in case of infinite allowance.
     * Revert if not enough allowance is available.
     *
     * Does not emit an {Approval} event.
     */
    function _spendAllowance(address owner, address spender, uint256 value) internal virtual {
        uint256 currentAllowance = allowance(owner, spender);
        if (currentAllowance != type(uint256).max) {
            if (currentAllowance < value) {
                revert ERC20InsufficientAllowance(spender, currentAllowance, value);
            }
            unchecked {
                _approve(owner, spender, currentAllowance - value, false);
            }
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.20;

import {IERC20} from "../IERC20.sol";

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the value of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the value of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 value) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 value) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the
     * allowance mechanism. `value` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 value) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/ERC721.sol)

pragma solidity ^0.8.20;

import {IERC721} from "./IERC721.sol";
import {IERC721Receiver} from "./IERC721Receiver.sol";
import {IERC721Metadata} from "./extensions/IERC721Metadata.sol";
import {Context} from "../../utils/Context.sol";
import {Strings} from "../../utils/Strings.sol";
import {IERC165, ERC165} from "../../utils/introspection/ERC165.sol";
import {IERC721Errors} from "../../interfaces/draft-IERC6093.sol";

/**
 * @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
 * the Metadata extension, but not including the Enumerable extension, which is available separately as
 * {ERC721Enumerable}.
 */
abstract contract ERC721 is Context, ERC165, IERC721, IERC721Metadata, IERC721Errors {
    using Strings for uint256;

    // Token name
    string private _name;

    // Token symbol
    string private _symbol;

    mapping(uint256 tokenId => address) private _owners;

    mapping(address owner => uint256) private _balances;

    mapping(uint256 tokenId => address) private _tokenApprovals;

    mapping(address owner => mapping(address operator => bool)) private _operatorApprovals;

    /**
     * @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
        return
            interfaceId == type(IERC721).interfaceId ||
            interfaceId == type(IERC721Metadata).interfaceId ||
            super.supportsInterface(interfaceId);
    }

    /**
     * @dev See {IERC721-balanceOf}.
     */
    function balanceOf(address owner) public view virtual returns (uint256) {
        if (owner == address(0)) {
            revert ERC721InvalidOwner(address(0));
        }
        return _balances[owner];
    }

    /**
     * @dev See {IERC721-ownerOf}.
     */
    function ownerOf(uint256 tokenId) public view virtual returns (address) {
        return _requireOwned(tokenId);
    }

    /**
     * @dev See {IERC721Metadata-name}.
     */
    function name() public view virtual returns (string memory) {
        return _name;
    }

    /**
     * @dev See {IERC721Metadata-symbol}.
     */
    function symbol() public view virtual returns (string memory) {
        return _symbol;
    }

    /**
     * @dev See {IERC721Metadata-tokenURI}.
     */
    function tokenURI(uint256 tokenId) public view virtual returns (string memory) {
        _requireOwned(tokenId);

        string memory baseURI = _baseURI();
        return bytes(baseURI).length > 0 ? string.concat(baseURI, tokenId.toString()) : "";
    }

    /**
     * @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
     * token will be the concatenation of the `baseURI` and the `tokenId`. Empty
     * by default, can be overridden in child contracts.
     */
    function _baseURI() internal view virtual returns (string memory) {
        return "";
    }

    /**
     * @dev See {IERC721-approve}.
     */
    function approve(address to, uint256 tokenId) public virtual {
        _approve(to, tokenId, _msgSender());
    }

    /**
     * @dev See {IERC721-getApproved}.
     */
    function getApproved(uint256 tokenId) public view virtual returns (address) {
        _requireOwned(tokenId);

        return _getApproved(tokenId);
    }

    /**
     * @dev See {IERC721-setApprovalForAll}.
     */
    function setApprovalForAll(address operator, bool approved) public virtual {
        _setApprovalForAll(_msgSender(), operator, approved);
    }

    /**
     * @dev See {IERC721-isApprovedForAll}.
     */
    function isApprovedForAll(address owner, address operator) public view virtual returns (bool) {
        return _operatorApprovals[owner][operator];
    }

    /**
     * @dev See {IERC721-transferFrom}.
     */
    function transferFrom(address from, address to, uint256 tokenId) public virtual {
        if (to == address(0)) {
            revert ERC721InvalidReceiver(address(0));
        }
        // Setting an "auth" arguments enables the `_isAuthorized` check which verifies that the token exists
        // (from != 0). Therefore, it is not needed to verify that the return value is not 0 here.
        address previousOwner = _update(to, tokenId, _msgSender());
        if (previousOwner != from) {
            revert ERC721IncorrectOwner(from, tokenId, previousOwner);
        }
    }

    /**
     * @dev See {IERC721-safeTransferFrom}.
     */
    function safeTransferFrom(address from, address to, uint256 tokenId) public {
        safeTransferFrom(from, to, tokenId, "");
    }

    /**
     * @dev See {IERC721-safeTransferFrom}.
     */
    function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory data) public virtual {
        transferFrom(from, to, tokenId);
        _checkOnERC721Received(from, to, tokenId, data);
    }

    /**
     * @dev Returns the owner of the `tokenId`. Does NOT revert if token doesn't exist
     *
     * IMPORTANT: Any overrides to this function that add ownership of tokens not tracked by the
     * core ERC721 logic MUST be matched with the use of {_increaseBalance} to keep balances
     * consistent with ownership. The invariant to preserve is that for any address `a` the value returned by
     * `balanceOf(a)` must be equal to the number of tokens such that `_ownerOf(tokenId)` is `a`.
     */
    function _ownerOf(uint256 tokenId) internal view virtual returns (address) {
        return _owners[tokenId];
    }

    /**
     * @dev Returns the approved address for `tokenId`. Returns 0 if `tokenId` is not minted.
     */
    function _getApproved(uint256 tokenId) internal view virtual returns (address) {
        return _tokenApprovals[tokenId];
    }

    /**
     * @dev Returns whether `spender` is allowed to manage `owner`'s tokens, or `tokenId` in
     * particular (ignoring whether it is owned by `owner`).
     *
     * WARNING: This function assumes that `owner` is the actual owner of `tokenId` and does not verify this
     * assumption.
     */
    function _isAuthorized(address owner, address spender, uint256 tokenId) internal view virtual returns (bool) {
        return
            spender != address(0) &&
            (owner == spender || isApprovedForAll(owner, spender) || _getApproved(tokenId) == spender);
    }

    /**
     * @dev Checks if `spender` can operate on `tokenId`, assuming the provided `owner` is the actual owner.
     * Reverts if `spender` does not have approval from the provided `owner` for the given token or for all its assets
     * the `spender` for the specific `tokenId`.
     *
     * WARNING: This function assumes that `owner` is the actual owner of `tokenId` and does not verify this
     * assumption.
     */
    function _checkAuthorized(address owner, address spender, uint256 tokenId) internal view virtual {
        if (!_isAuthorized(owner, spender, tokenId)) {
            if (owner == address(0)) {
                revert ERC721NonexistentToken(tokenId);
            } else {
                revert ERC721InsufficientApproval(spender, tokenId);
            }
        }
    }

    /**
     * @dev Unsafe write access to the balances, used by extensions that "mint" tokens using an {ownerOf} override.
     *
     * NOTE: the value is limited to type(uint128).max. This protect against _balance overflow. It is unrealistic that
     * a uint256 would ever overflow from increments when these increments are bounded to uint128 values.
     *
     * WARNING: Increasing an account's balance using this function tends to be paired with an override of the
     * {_ownerOf} function to resolve the ownership of the corresponding tokens so that balances and ownership
     * remain consistent with one another.
     */
    function _increaseBalance(address account, uint128 value) internal virtual {
        unchecked {
            _balances[account] += value;
        }
    }

    /**
     * @dev Transfers `tokenId` from its current owner to `to`, or alternatively mints (or burns) if the current owner
     * (or `to`) is the zero address. Returns the owner of the `tokenId` before the update.
     *
     * The `auth` argument is optional. If the value passed is non 0, then this function will check that
     * `auth` is either the owner of the token, or approved to operate on the token (by the owner).
     *
     * Emits a {Transfer} event.
     *
     * NOTE: If overriding this function in a way that tracks balances, see also {_increaseBalance}.
     */
    function _update(address to, uint256 tokenId, address auth) internal virtual returns (address) {
        address from = _ownerOf(tokenId);

        // Perform (optional) operator check
        if (auth != address(0)) {
            _checkAuthorized(from, auth, tokenId);
        }

        // Execute the update
        if (from != address(0)) {
            // Clear approval. No need to re-authorize or emit the Approval event
            _approve(address(0), tokenId, address(0), false);

            unchecked {
                _balances[from] -= 1;
            }
        }

        if (to != address(0)) {
            unchecked {
                _balances[to] += 1;
            }
        }

        _owners[tokenId] = to;

        emit Transfer(from, to, tokenId);

        return from;
    }

    /**
     * @dev Mints `tokenId` and transfers it to `to`.
     *
     * WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
     *
     * Requirements:
     *
     * - `tokenId` must not exist.
     * - `to` cannot be the zero address.
     *
     * Emits a {Transfer} event.
     */
    function _mint(address to, uint256 tokenId) internal {
        if (to == address(0)) {
            revert ERC721InvalidReceiver(address(0));
        }
        address previousOwner = _update(to, tokenId, address(0));
        if (previousOwner != address(0)) {
            revert ERC721InvalidSender(address(0));
        }
    }

    /**
     * @dev Mints `tokenId`, transfers it to `to` and checks for `to` acceptance.
     *
     * Requirements:
     *
     * - `tokenId` must not exist.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function _safeMint(address to, uint256 tokenId) internal {
        _safeMint(to, tokenId, "");
    }

    /**
     * @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
     * forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
     */
    function _safeMint(address to, uint256 tokenId, bytes memory data) internal virtual {
        _mint(to, tokenId);
        _checkOnERC721Received(address(0), to, tokenId, data);
    }

    /**
     * @dev Destroys `tokenId`.
     * The approval is cleared when the token is burned.
     * This is an internal function that does not check if the sender is authorized to operate on the token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     *
     * Emits a {Transfer} event.
     */
    function _burn(uint256 tokenId) internal {
        address previousOwner = _update(address(0), tokenId, address(0));
        if (previousOwner == address(0)) {
            revert ERC721NonexistentToken(tokenId);
        }
    }

    /**
     * @dev Transfers `tokenId` from `from` to `to`.
     *  As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     *
     * Emits a {Transfer} event.
     */
    function _transfer(address from, address to, uint256 tokenId) internal {
        if (to == address(0)) {
            revert ERC721InvalidReceiver(address(0));
        }
        address previousOwner = _update(to, tokenId, address(0));
        if (previousOwner == address(0)) {
            revert ERC721NonexistentToken(tokenId);
        } else if (previousOwner != from) {
            revert ERC721IncorrectOwner(from, tokenId, previousOwner);
        }
    }

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`, checking that contract recipients
     * are aware of the ERC721 standard to prevent tokens from being forever locked.
     *
     * `data` is additional data, it has no specified format and it is sent in call to `to`.
     *
     * This internal function is like {safeTransferFrom} in the sense that it invokes
     * {IERC721Receiver-onERC721Received} on the receiver, and can be used to e.g.
     * implement alternative mechanisms to perform token transfer, such as signature-based.
     *
     * Requirements:
     *
     * - `tokenId` token must exist and be owned by `from`.
     * - `to` cannot be the zero address.
     * - `from` cannot be the zero address.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function _safeTransfer(address from, address to, uint256 tokenId) internal {
        _safeTransfer(from, to, tokenId, "");
    }

    /**
     * @dev Same as {xref-ERC721-_safeTransfer-address-address-uint256-}[`_safeTransfer`], with an additional `data` parameter which is
     * forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
     */
    function _safeTransfer(address from, address to, uint256 tokenId, bytes memory data) internal virtual {
        _transfer(from, to, tokenId);
        _checkOnERC721Received(from, to, tokenId, data);
    }

    /**
     * @dev Approve `to` to operate on `tokenId`
     *
     * The `auth` argument is optional. If the value passed is non 0, then this function will check that `auth` is
     * either the owner of the token, or approved to operate on all tokens held by this owner.
     *
     * Emits an {Approval} event.
     *
     * Overrides to this logic should be done to the variant with an additional `bool emitEvent` argument.
     */
    function _approve(address to, uint256 tokenId, address auth) internal {
        _approve(to, tokenId, auth, true);
    }

    /**
     * @dev Variant of `_approve` with an optional flag to enable or disable the {Approval} event. The event is not
     * emitted in the context of transfers.
     */
    function _approve(address to, uint256 tokenId, address auth, bool emitEvent) internal virtual {
        // Avoid reading the owner unless necessary
        if (emitEvent || auth != address(0)) {
            address owner = _requireOwned(tokenId);

            // We do not use _isAuthorized because single-token approvals should not be able to call approve
            if (auth != address(0) && owner != auth && !isApprovedForAll(owner, auth)) {
                revert ERC721InvalidApprover(auth);
            }

            if (emitEvent) {
                emit Approval(owner, to, tokenId);
            }
        }

        _tokenApprovals[tokenId] = to;
    }

    /**
     * @dev Approve `operator` to operate on all of `owner` tokens
     *
     * Requirements:
     * - operator can't be the address zero.
     *
     * Emits an {ApprovalForAll} event.
     */
    function _setApprovalForAll(address owner, address operator, bool approved) internal virtual {
        if (operator == address(0)) {
            revert ERC721InvalidOperator(operator);
        }
        _operatorApprovals[owner][operator] = approved;
        emit ApprovalForAll(owner, operator, approved);
    }

    /**
     * @dev Reverts if the `tokenId` doesn't have a current owner (it hasn't been minted, or it has been burned).
     * Returns the owner.
     *
     * Overrides to ownership logic should be done to {_ownerOf}.
     */
    function _requireOwned(uint256 tokenId) internal view returns (address) {
        address owner = _ownerOf(tokenId);
        if (owner == address(0)) {
            revert ERC721NonexistentToken(tokenId);
        }
        return owner;
    }

    /**
     * @dev Private function to invoke {IERC721Receiver-onERC721Received} on a target address. This will revert if the
     * recipient doesn't accept the token transfer. The call is not executed if the target address is not a contract.
     *
     * @param from address representing the previous owner of the given token ID
     * @param to target address that will receive the tokens
     * @param tokenId uint256 ID of the token to be transferred
     * @param data bytes optional data to send along with the call
     */
    function _checkOnERC721Received(address from, address to, uint256 tokenId, bytes memory data) private {
        if (to.code.length > 0) {
            try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, data) returns (bytes4 retval) {
                if (retval != IERC721Receiver.onERC721Received.selector) {
                    revert ERC721InvalidReceiver(to);
                }
            } catch (bytes memory reason) {
                if (reason.length == 0) {
                    revert ERC721InvalidReceiver(to);
                } else {
                    /// @solidity memory-safe-assembly
                    assembly {
                        revert(add(32, reason), mload(reason))
                    }
                }
            }
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/extensions/IERC721Metadata.sol)

pragma solidity ^0.8.20;

import {IERC721} from "../IERC721.sol";

/**
 * @title ERC-721 Non-Fungible Token Standard, optional metadata extension
 * @dev See https://eips.ethereum.org/EIPS/eip-721
 */
interface IERC721Metadata is IERC721 {
    /**
     * @dev Returns the token collection name.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the token collection symbol.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
     */
    function tokenURI(uint256 tokenId) external view returns (string memory);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/IERC721.sol)

pragma solidity ^0.8.20;

import {IERC165} from "../../utils/introspection/IERC165.sol";

/**
 * @dev Required interface of an ERC721 compliant contract.
 */
interface IERC721 is IERC165 {
    /**
     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.
     */
    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
     */
    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
     */
    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);

    /**
     * @dev Returns the number of tokens in ``owner``'s account.
     */
    function balanceOf(address owner) external view returns (uint256 balance);

    /**
     * @dev Returns the owner of the `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function ownerOf(uint256 tokenId) external view returns (address owner);

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon
     *   a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(address from, address to, uint256 tokenId, bytes calldata data) external;

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
     * are aware of the ERC721 protocol to prevent tokens from being forever locked.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must have been allowed to move this token by either {approve} or
     *   {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon
     *   a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(address from, address to, uint256 tokenId) external;

    /**
     * @dev Transfers `tokenId` token from `from` to `to`.
     *
     * WARNING: Note that the caller is responsible to confirm that the recipient is capable of receiving ERC721
     * or else they may be permanently lost. Usage of {safeTransferFrom} prevents loss, though the caller must
     * understand this adds an external call which potentially creates a reentrancy vulnerability.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 tokenId) external;

    /**
     * @dev Gives permission to `to` to transfer `tokenId` token to another account.
     * The approval is cleared when the token is transferred.
     *
     * Only a single account can be approved at a time, so approving the zero address clears previous approvals.
     *
     * Requirements:
     *
     * - The caller must own the token or be an approved operator.
     * - `tokenId` must exist.
     *
     * Emits an {Approval} event.
     */
    function approve(address to, uint256 tokenId) external;

    /**
     * @dev Approve or remove `operator` as an operator for the caller.
     * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
     *
     * Requirements:
     *
     * - The `operator` cannot be the address zero.
     *
     * Emits an {ApprovalForAll} event.
     */
    function setApprovalForAll(address operator, bool approved) external;

    /**
     * @dev Returns the account approved for `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function getApproved(uint256 tokenId) external view returns (address operator);

    /**
     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
     *
     * See {setApprovalForAll}
     */
    function isApprovedForAll(address owner, address operator) external view returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/IERC721Receiver.sol)

pragma solidity ^0.8.20;

/**
 * @title ERC721 token receiver interface
 * @dev Interface for any contract that wants to support safeTransfers
 * from ERC721 asset contracts.
 */
interface IERC721Receiver {
    /**
     * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
     * by `operator` from `from`, this function is called.
     *
     * It must return its Solidity selector to confirm the token transfer.
     * If any other value is returned or the interface is not implemented by the recipient, the transfer will be
     * reverted.
     *
     * The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`.
     */
    function onERC721Received(
        address operator,
        address from,
        uint256 tokenId,
        bytes calldata data
    ) external returns (bytes4);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Context.sol)

pragma solidity ^0.8.20;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/cryptography/ECDSA.sol)

pragma solidity ^0.8.20;

/**
 * @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.
 *
 * These functions can be used to verify that a message was signed by the holder
 * of the private keys of a given address.
 */
library ECDSA {
    enum RecoverError {
        NoError,
        InvalidSignature,
        InvalidSignatureLength,
        InvalidSignatureS
    }

    /**
     * @dev The signature derives the `address(0)`.
     */
    error ECDSAInvalidSignature();

    /**
     * @dev The signature has an invalid length.
     */
    error ECDSAInvalidSignatureLength(uint256 length);

    /**
     * @dev The signature has an S value that is in the upper half order.
     */
    error ECDSAInvalidSignatureS(bytes32 s);

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with `signature` or an error. This will not
     * return address(0) without also returning an error description. Errors are documented using an enum (error type)
     * and a bytes32 providing additional information about the error.
     *
     * If no error is returned, then the address can be used for verification purposes.
     *
     * The `ecrecover` EVM precompile allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {MessageHashUtils-toEthSignedMessageHash} on it.
     *
     * Documentation for signature generation:
     * - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]
     * - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]
     */
    function tryRecover(bytes32 hash, bytes memory signature) internal pure returns (address, RecoverError, bytes32) {
        if (signature.length == 65) {
            bytes32 r;
            bytes32 s;
            uint8 v;
            // ecrecover takes the signature parameters, and the only way to get them
            // currently is to use assembly.
            /// @solidity memory-safe-assembly
            assembly {
                r := mload(add(signature, 0x20))
                s := mload(add(signature, 0x40))
                v := byte(0, mload(add(signature, 0x60)))
            }
            return tryRecover(hash, v, r, s);
        } else {
            return (address(0), RecoverError.InvalidSignatureLength, bytes32(signature.length));
        }
    }

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with
     * `signature`. This address can then be used for verification purposes.
     *
     * The `ecrecover` EVM precompile allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {MessageHashUtils-toEthSignedMessageHash} on it.
     */
    function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {
        (address recovered, RecoverError error, bytes32 errorArg) = tryRecover(hash, signature);
        _throwError(error, errorArg);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `r` and `vs` short-signature fields separately.
     *
     * See https://eips.ethereum.org/EIPS/eip-2098[EIP-2098 short signatures]
     */
    function tryRecover(bytes32 hash, bytes32 r, bytes32 vs) internal pure returns (address, RecoverError, bytes32) {
        unchecked {
            bytes32 s = vs & bytes32(0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff);
            // We do not check for an overflow here since the shift operation results in 0 or 1.
            uint8 v = uint8((uint256(vs) >> 255) + 27);
            return tryRecover(hash, v, r, s);
        }
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `r and `vs` short-signature fields separately.
     */
    function recover(bytes32 hash, bytes32 r, bytes32 vs) internal pure returns (address) {
        (address recovered, RecoverError error, bytes32 errorArg) = tryRecover(hash, r, vs);
        _throwError(error, errorArg);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `v`,
     * `r` and `s` signature fields separately.
     */
    function tryRecover(
        bytes32 hash,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal pure returns (address, RecoverError, bytes32) {
        // EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
        // unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
        // the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most
        // signatures from current libraries generate a unique signature with an s-value in the lower half order.
        //
        // If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
        // with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
        // vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
        // these malleable signatures as well.
        if (uint256(s) > 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) {
            return (address(0), RecoverError.InvalidSignatureS, s);
        }

        // If the signature is valid (and not malleable), return the signer address
        address signer = ecrecover(hash, v, r, s);
        if (signer == address(0)) {
            return (address(0), RecoverError.InvalidSignature, bytes32(0));
        }

        return (signer, RecoverError.NoError, bytes32(0));
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `v`,
     * `r` and `s` signature fields separately.
     */
    function recover(bytes32 hash, uint8 v, bytes32 r, bytes32 s) internal pure returns (address) {
        (address recovered, RecoverError error, bytes32 errorArg) = tryRecover(hash, v, r, s);
        _throwError(error, errorArg);
        return recovered;
    }

    /**
     * @dev Optionally reverts with the corresponding custom error according to the `error` argument provided.
     */
    function _throwError(RecoverError error, bytes32 errorArg) private pure {
        if (error == RecoverError.NoError) {
            return; // no error: do nothing
        } else if (error == RecoverError.InvalidSignature) {
            revert ECDSAInvalidSignature();
        } else if (error == RecoverError.InvalidSignatureLength) {
            revert ECDSAInvalidSignatureLength(uint256(errorArg));
        } else if (error == RecoverError.InvalidSignatureS) {
            revert ECDSAInvalidSignatureS(errorArg);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/cryptography/MerkleProof.sol)

pragma solidity ^0.8.20;

/**
 * @dev These functions deal with verification of Merkle Tree proofs.
 *
 * The tree and the proofs can be generated using our
 * https://github.com/OpenZeppelin/merkle-tree[JavaScript library].
 * You will find a quickstart guide in the readme.
 *
 * WARNING: You should avoid using leaf values that are 64 bytes long prior to
 * hashing, or use a hash function other than keccak256 for hashing leaves.
 * This is because the concatenation of a sorted pair of internal nodes in
 * the Merkle tree could be reinterpreted as a leaf value.
 * OpenZeppelin's JavaScript library generates Merkle trees that are safe
 * against this attack out of the box.
 */
library MerkleProof {
    /**
     *@dev The multiproof provided is not valid.
     */
    error MerkleProofInvalidMultiproof();

    /**
     * @dev Returns true if a `leaf` can be proved to be a part of a Merkle tree
     * defined by `root`. For this, a `proof` must be provided, containing
     * sibling hashes on the branch from the leaf to the root of the tree. Each
     * pair of leaves and each pair of pre-images are assumed to be sorted.
     */
    function verify(bytes32[] memory proof, bytes32 root, bytes32 leaf) internal pure returns (bool) {
        return processProof(proof, leaf) == root;
    }

    /**
     * @dev Calldata version of {verify}
     */
    function verifyCalldata(bytes32[] calldata proof, bytes32 root, bytes32 leaf) internal pure returns (bool) {
        return processProofCalldata(proof, leaf) == root;
    }

    /**
     * @dev Returns the rebuilt hash obtained by traversing a Merkle tree up
     * from `leaf` using `proof`. A `proof` is valid if and only if the rebuilt
     * hash matches the root of the tree. When processing the proof, the pairs
     * of leafs & pre-images are assumed to be sorted.
     */
    function processProof(bytes32[] memory proof, bytes32 leaf) internal pure returns (bytes32) {
        bytes32 computedHash = leaf;
        for (uint256 i = 0; i < proof.length; i++) {
            computedHash = _hashPair(computedHash, proof[i]);
        }
        return computedHash;
    }

    /**
     * @dev Calldata version of {processProof}
     */
    function processProofCalldata(bytes32[] calldata proof, bytes32 leaf) internal pure returns (bytes32) {
        bytes32 computedHash = leaf;
        for (uint256 i = 0; i < proof.length; i++) {
            computedHash = _hashPair(computedHash, proof[i]);
        }
        return computedHash;
    }

    /**
     * @dev Returns true if the `leaves` can be simultaneously proven to be a part of a Merkle tree defined by
     * `root`, according to `proof` and `proofFlags` as described in {processMultiProof}.
     *
     * CAUTION: Not all Merkle trees admit multiproofs. See {processMultiProof} for details.
     */
    function multiProofVerify(
        bytes32[] memory proof,
        bool[] memory proofFlags,
        bytes32 root,
        bytes32[] memory leaves
    ) internal pure returns (bool) {
        return processMultiProof(proof, proofFlags, leaves) == root;
    }

    /**
     * @dev Calldata version of {multiProofVerify}
     *
     * CAUTION: Not all Merkle trees admit multiproofs. See {processMultiProof} for details.
     */
    function multiProofVerifyCalldata(
        bytes32[] calldata proof,
        bool[] calldata proofFlags,
        bytes32 root,
        bytes32[] memory leaves
    ) internal pure returns (bool) {
        return processMultiProofCalldata(proof, proofFlags, leaves) == root;
    }

    /**
     * @dev Returns the root of a tree reconstructed from `leaves` and sibling nodes in `proof`. The reconstruction
     * proceeds by incrementally reconstructing all inner nodes by combining a leaf/inner node with either another
     * leaf/inner node or a proof sibling node, depending on whether each `proofFlags` item is true or false
     * respectively.
     *
     * CAUTION: Not all Merkle trees admit multiproofs. To use multiproofs, it is sufficient to ensure that: 1) the tree
     * is complete (but not necessarily perfect), 2) the leaves to be proven are in the opposite order they are in the
     * tree (i.e., as seen from right to left starting at the deepest layer and continuing at the next layer).
     */
    function processMultiProof(
        bytes32[] memory proof,
        bool[] memory proofFlags,
        bytes32[] memory leaves
    ) internal pure returns (bytes32 merkleRoot) {
        // This function rebuilds the root hash by traversing the tree up from the leaves. The root is rebuilt by
        // consuming and producing values on a queue. The queue starts with the `leaves` array, then goes onto the
        // `hashes` array. At the end of the process, the last hash in the `hashes` array should contain the root of
        // the Merkle tree.
        uint256 leavesLen = leaves.length;
        uint256 proofLen = proof.length;
        uint256 totalHashes = proofFlags.length;

        // Check proof validity.
        if (leavesLen + proofLen != totalHashes + 1) {
            revert MerkleProofInvalidMultiproof();
        }

        // The xxxPos values are "pointers" to the next value to consume in each array. All accesses are done using
        // `xxx[xxxPos++]`, which return the current value and increment the pointer, thus mimicking a queue's "pop".
        bytes32[] memory hashes = new bytes32[](totalHashes);
        uint256 leafPos = 0;
        uint256 hashPos = 0;
        uint256 proofPos = 0;
        // At each step, we compute the next hash using two values:
        // - a value from the "main queue". If not all leaves have been consumed, we get the next leaf, otherwise we
        //   get the next hash.
        // - depending on the flag, either another value from the "main queue" (merging branches) or an element from the
        //   `proof` array.
        for (uint256 i = 0; i < totalHashes; i++) {
            bytes32 a = leafPos < leavesLen ? leaves[leafPos++] : hashes[hashPos++];
            bytes32 b = proofFlags[i]
                ? (leafPos < leavesLen ? leaves[leafPos++] : hashes[hashPos++])
                : proof[proofPos++];
            hashes[i] = _hashPair(a, b);
        }

        if (totalHashes > 0) {
            if (proofPos != proofLen) {
                revert MerkleProofInvalidMultiproof();
            }
            unchecked {
                return hashes[totalHashes - 1];
            }
        } else if (leavesLen > 0) {
            return leaves[0];
        } else {
            return proof[0];
        }
    }

    /**
     * @dev Calldata version of {processMultiProof}.
     *
     * CAUTION: Not all Merkle trees admit multiproofs. See {processMultiProof} for details.
     */
    function processMultiProofCalldata(
        bytes32[] calldata proof,
        bool[] calldata proofFlags,
        bytes32[] memory leaves
    ) internal pure returns (bytes32 merkleRoot) {
        // This function rebuilds the root hash by traversing the tree up from the leaves. The root is rebuilt by
        // consuming and producing values on a queue. The queue starts with the `leaves` array, then goes onto the
        // `hashes` array. At the end of the process, the last hash in the `hashes` array should contain the root of
        // the Merkle tree.
        uint256 leavesLen = leaves.length;
        uint256 proofLen = proof.length;
        uint256 totalHashes = proofFlags.length;

        // Check proof validity.
        if (leavesLen + proofLen != totalHashes + 1) {
            revert MerkleProofInvalidMultiproof();
        }

        // The xxxPos values are "pointers" to the next value to consume in each array. All accesses are done using
        // `xxx[xxxPos++]`, which return the current value and increment the pointer, thus mimicking a queue's "pop".
        bytes32[] memory hashes = new bytes32[](totalHashes);
        uint256 leafPos = 0;
        uint256 hashPos = 0;
        uint256 proofPos = 0;
        // At each step, we compute the next hash using two values:
        // - a value from the "main queue". If not all leaves have been consumed, we get the next leaf, otherwise we
        //   get the next hash.
        // - depending on the flag, either another value from the "main queue" (merging branches) or an element from the
        //   `proof` array.
        for (uint256 i = 0; i < totalHashes; i++) {
            bytes32 a = leafPos < leavesLen ? leaves[leafPos++] : hashes[hashPos++];
            bytes32 b = proofFlags[i]
                ? (leafPos < leavesLen ? leaves[leafPos++] : hashes[hashPos++])
                : proof[proofPos++];
            hashes[i] = _hashPair(a, b);
        }

        if (totalHashes > 0) {
            if (proofPos != proofLen) {
                revert MerkleProofInvalidMultiproof();
            }
            unchecked {
                return hashes[totalHashes - 1];
            }
        } else if (leavesLen > 0) {
            return leaves[0];
        } else {
            return proof[0];
        }
    }

    /**
     * @dev Sorts the pair (a, b) and hashes the result.
     */
    function _hashPair(bytes32 a, bytes32 b) private pure returns (bytes32) {
        return a < b ? _efficientHash(a, b) : _efficientHash(b, a);
    }

    /**
     * @dev Implementation of keccak256(abi.encode(a, b)) that doesn't allocate or expand memory.
     */
    function _efficientHash(bytes32 a, bytes32 b) private pure returns (bytes32 value) {
        /// @solidity memory-safe-assembly
        assembly {
            mstore(0x00, a)
            mstore(0x20, b)
            value := keccak256(0x00, 0x40)
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/cryptography/MessageHashUtils.sol)

pragma solidity ^0.8.20;

import {Strings} from "../Strings.sol";

/**
 * @dev Signature message hash utilities for producing digests to be consumed by {ECDSA} recovery or signing.
 *
 * The library provides methods for generating a hash of a message that conforms to the
 * https://eips.ethereum.org/EIPS/eip-191[EIP 191] and https://eips.ethereum.org/EIPS/eip-712[EIP 712]
 * specifications.
 */
library MessageHashUtils {
    /**
     * @dev Returns the keccak256 digest of an EIP-191 signed data with version
     * `0x45` (`personal_sign` messages).
     *
     * The digest is calculated by prefixing a bytes32 `messageHash` with
     * `"\x19Ethereum Signed Message:\n32"` and hashing the result. It corresponds with the
     * hash signed when using the https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`] JSON-RPC method.
     *
     * NOTE: The `messageHash` parameter is intended to be the result of hashing a raw message with
     * keccak256, although any bytes32 value can be safely used because the final digest will
     * be re-hashed.
     *
     * See {ECDSA-recover}.
     */
    function toEthSignedMessageHash(bytes32 messageHash) internal pure returns (bytes32 digest) {
        /// @solidity memory-safe-assembly
        assembly {
            mstore(0x00, "\x19Ethereum Signed Message:\n32") // 32 is the bytes-length of messageHash
            mstore(0x1c, messageHash) // 0x1c (28) is the length of the prefix
            digest := keccak256(0x00, 0x3c) // 0x3c is the length of the prefix (0x1c) + messageHash (0x20)
        }
    }

    /**
     * @dev Returns the keccak256 digest of an EIP-191 signed data with version
     * `0x45` (`personal_sign` messages).
     *
     * The digest is calculated by prefixing an arbitrary `message` with
     * `"\x19Ethereum Signed Message:\n" + len(message)` and hashing the result. It corresponds with the
     * hash signed when using the https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`] JSON-RPC method.
     *
     * See {ECDSA-recover}.
     */
    function toEthSignedMessageHash(bytes memory message) internal pure returns (bytes32) {
        return
            keccak256(bytes.concat("\x19Ethereum Signed Message:\n", bytes(Strings.toString(message.length)), message));
    }

    /**
     * @dev Returns the keccak256 digest of an EIP-191 signed data with version
     * `0x00` (data with intended validator).
     *
     * The digest is calculated by prefixing an arbitrary `data` with `"\x19\x00"` and the intended
     * `validator` address. Then hashing the result.
     *
     * See {ECDSA-recover}.
     */
    function toDataWithIntendedValidatorHash(address validator, bytes memory data) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked(hex"19_00", validator, data));
    }

    /**
     * @dev Returns the keccak256 digest of an EIP-712 typed data (EIP-191 version `0x01`).
     *
     * The digest is calculated from a `domainSeparator` and a `structHash`, by prefixing them with
     * `\x19\x01` and hashing the result. It corresponds to the hash signed by the
     * https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`] JSON-RPC method as part of EIP-712.
     *
     * See {ECDSA-recover}.
     */
    function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32 digest) {
        /// @solidity memory-safe-assembly
        assembly {
            let ptr := mload(0x40)
            mstore(ptr, hex"19_01")
            mstore(add(ptr, 0x02), domainSeparator)
            mstore(add(ptr, 0x22), structHash)
            digest := keccak256(ptr, 0x42)
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/cryptography/SignatureChecker.sol)

pragma solidity ^0.8.20;

import {ECDSA} from "./ECDSA.sol";
import {IERC1271} from "../../interfaces/IERC1271.sol";

/**
 * @dev Signature verification helper that can be used instead of `ECDSA.recover` to seamlessly support both ECDSA
 * signatures from externally owned accounts (EOAs) as well as ERC1271 signatures from smart contract wallets like
 * Argent and Safe Wallet (previously Gnosis Safe).
 */
library SignatureChecker {
    /**
     * @dev Checks if a signature is valid for a given signer and data hash. If the signer is a smart contract, the
     * signature is validated against that smart contract using ERC1271, otherwise it's validated using `ECDSA.recover`.
     *
     * NOTE: Unlike ECDSA signatures, contract signatures are revocable, and the outcome of this function can thus
     * change through time. It could return true at block N and false at block N+1 (or the opposite).
     */
    function isValidSignatureNow(address signer, bytes32 hash, bytes memory signature) internal view returns (bool) {
        (address recovered, ECDSA.RecoverError error, ) = ECDSA.tryRecover(hash, signature);
        return
            (error == ECDSA.RecoverError.NoError && recovered == signer) ||
            isValidERC1271SignatureNow(signer, hash, signature);
    }

    /**
     * @dev Checks if a signature is valid for a given signer and data hash. The signature is validated
     * against the signer smart contract using ERC1271.
     *
     * NOTE: Unlike ECDSA signatures, contract signatures are revocable, and the outcome of this function can thus
     * change through time. It could return true at block N and false at block N+1 (or the opposite).
     */
    function isValidERC1271SignatureNow(
        address signer,
        bytes32 hash,
        bytes memory signature
    ) internal view returns (bool) {
        (bool success, bytes memory result) = signer.staticcall(
            abi.encodeCall(IERC1271.isValidSignature, (hash, signature))
        );
        return (success &&
            result.length >= 32 &&
            abi.decode(result, (bytes32)) == bytes32(IERC1271.isValidSignature.selector));
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/ERC165.sol)

pragma solidity ^0.8.20;

import {IERC165} from "./IERC165.sol";

/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/IERC165.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/Math.sol)

pragma solidity ^0.8.20;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    /**
     * @dev Muldiv operation overflow.
     */
    error MathOverflowedMulDiv();

    enum Rounding {
        Floor, // Toward negative infinity
        Ceil, // Toward positive infinity
        Trunc, // Toward zero
        Expand // Away from zero
    }

    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            uint256 c = a + b;
            if (c < a) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, with an overflow flag.
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b > a) return (false, 0);
            return (true, a - b);
        }
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
            // benefit is lost if 'b' is also tested.
            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
            if (a == 0) return (true, 0);
            uint256 c = a * b;
            if (c / a != b) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a / b);
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a % b);
        }
    }

    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds towards infinity instead
     * of rounding towards zero.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        if (b == 0) {
            // Guarantee the same behavior as in a regular Solidity division.
            return a / b;
        }

        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }

    /**
     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or
     * denominator == 0.
     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv) with further edits by
     * Uniswap Labs also under MIT license.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2^256 + prod0.
            uint256 prod0 = x * y; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }

            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                // Solidity will revert if denominator == 0, unlike the div opcode on its own.
                // The surrounding unchecked block does not change this fact.
                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.
                return prod0 / denominator;
            }

            // Make sure the result is less than 2^256. Also prevents denominator == 0.
            if (denominator <= prod1) {
                revert MathOverflowedMulDiv();
            }

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)

                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }

            // Factor powers of two out of denominator and compute largest power of two divisor of denominator.
            // Always >= 1. See https://cs.stackexchange.com/q/138556/92363.

            uint256 twos = denominator & (0 - denominator);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)

                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)

                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }

            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;

            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 2^4.
            uint256 inverse = (3 * denominator) ^ 2;

            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also
            // works in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2^8
            inverse *= 2 - denominator * inverse; // inverse mod 2^16
            inverse *= 2 - denominator * inverse; // inverse mod 2^32
            inverse *= 2 - denominator * inverse; // inverse mod 2^64
            inverse *= 2 - denominator * inverse; // inverse mod 2^128
            inverse *= 2 - denominator * inverse; // inverse mod 2^256

            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }

    /**
     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {
        uint256 result = mulDiv(x, y, denominator);
        if (unsignedRoundsUp(rounding) && mulmod(x, y, denominator) > 0) {
            result += 1;
        }
        return result;
    }

    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded
     * towards zero.
     *
     * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }

        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
        //
        // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
        //
        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
        //
        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
        uint256 result = 1 << (log2(a) >> 1);

        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
        // into the expected uint128 result.
        unchecked {
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            return min(result, a / result);
        }
    }

    /**
     * @notice Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = sqrt(a);
            return result + (unsignedRoundsUp(rounding) && result * result < a ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 2 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     */
    function log2(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 128;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 64;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 32;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 16;
            }
            if (value >> 8 > 0) {
                value >>= 8;
                result += 8;
            }
            if (value >> 4 > 0) {
                value >>= 4;
                result += 4;
            }
            if (value >> 2 > 0) {
                value >>= 2;
                result += 2;
            }
            if (value >> 1 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log2(value);
            return result + (unsignedRoundsUp(rounding) && 1 << result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 10 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10 ** 64) {
                value /= 10 ** 64;
                result += 64;
            }
            if (value >= 10 ** 32) {
                value /= 10 ** 32;
                result += 32;
            }
            if (value >= 10 ** 16) {
                value /= 10 ** 16;
                result += 16;
            }
            if (value >= 10 ** 8) {
                value /= 10 ** 8;
                result += 8;
            }
            if (value >= 10 ** 4) {
                value /= 10 ** 4;
                result += 4;
            }
            if (value >= 10 ** 2) {
                value /= 10 ** 2;
                result += 2;
            }
            if (value >= 10 ** 1) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log10(value);
            return result + (unsignedRoundsUp(rounding) && 10 ** result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 256 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 16;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 8;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 4;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 2;
            }
            if (value >> 8 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log256(value);
            return result + (unsignedRoundsUp(rounding) && 1 << (result << 3) < value ? 1 : 0);
        }
    }

    /**
     * @dev Returns whether a provided rounding mode is considered rounding up for unsigned integers.
     */
    function unsignedRoundsUp(Rounding rounding) internal pure returns (bool) {
        return uint8(rounding) % 2 == 1;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/SignedMath.sol)

pragma solidity ^0.8.20;

/**
 * @dev Standard signed math utilities missing in the Solidity language.
 */
library SignedMath {
    /**
     * @dev Returns the largest of two signed numbers.
     */
    function max(int256 a, int256 b) internal pure returns (int256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two signed numbers.
     */
    function min(int256 a, int256 b) internal pure returns (int256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two signed numbers without overflow.
     * The result is rounded towards zero.
     */
    function average(int256 a, int256 b) internal pure returns (int256) {
        // Formula from the book "Hacker's Delight"
        int256 x = (a & b) + ((a ^ b) >> 1);
        return x + (int256(uint256(x) >> 255) & (a ^ b));
    }

    /**
     * @dev Returns the absolute unsigned value of a signed value.
     */
    function abs(int256 n) internal pure returns (uint256) {
        unchecked {
            // must be unchecked in order to support `n = type(int256).min`
            return uint256(n >= 0 ? n : -n);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Pausable.sol)

pragma solidity ^0.8.20;

import {Context} from "../utils/Context.sol";

/**
 * @dev Contract module which allows children to implement an emergency stop
 * mechanism that can be triggered by an authorized account.
 *
 * This module is used through inheritance. It will make available the
 * modifiers `whenNotPaused` and `whenPaused`, which can be applied to
 * the functions of your contract. Note that they will not be pausable by
 * simply including this module, only once the modifiers are put in place.
 */
abstract contract Pausable is Context {
    bool private _paused;

    /**
     * @dev Emitted when the pause is triggered by `account`.
     */
    event Paused(address account);

    /**
     * @dev Emitted when the pause is lifted by `account`.
     */
    event Unpaused(address account);

    /**
     * @dev The operation failed because the contract is paused.
     */
    error EnforcedPause();

    /**
     * @dev The operation failed because the contract is not paused.
     */
    error ExpectedPause();

    /**
     * @dev Initializes the contract in unpaused state.
     */
    constructor() {
        _paused = false;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is not paused.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    modifier whenNotPaused() {
        _requireNotPaused();
        _;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is paused.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    modifier whenPaused() {
        _requirePaused();
        _;
    }

    /**
     * @dev Returns true if the contract is paused, and false otherwise.
     */
    function paused() public view virtual returns (bool) {
        return _paused;
    }

    /**
     * @dev Throws if the contract is paused.
     */
    function _requireNotPaused() internal view virtual {
        if (paused()) {
            revert EnforcedPause();
        }
    }

    /**
     * @dev Throws if the contract is not paused.
     */
    function _requirePaused() internal view virtual {
        if (!paused()) {
            revert ExpectedPause();
        }
    }

    /**
     * @dev Triggers stopped state.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    function _pause() internal virtual whenNotPaused {
        _paused = true;
        emit Paused(_msgSender());
    }

    /**
     * @dev Returns to normal state.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    function _unpause() internal virtual whenPaused {
        _paused = false;
        emit Unpaused(_msgSender());
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Strings.sol)

pragma solidity ^0.8.20;

import {Math} from "./math/Math.sol";
import {SignedMath} from "./math/SignedMath.sol";

/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant HEX_DIGITS = "0123456789abcdef";
    uint8 private constant ADDRESS_LENGTH = 20;

    /**
     * @dev The `value` string doesn't fit in the specified `length`.
     */
    error StringsInsufficientHexLength(uint256 value, uint256 length);

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        unchecked {
            uint256 length = Math.log10(value) + 1;
            string memory buffer = new string(length);
            uint256 ptr;
            /// @solidity memory-safe-assembly
            assembly {
                ptr := add(buffer, add(32, length))
            }
            while (true) {
                ptr--;
                /// @solidity memory-safe-assembly
                assembly {
                    mstore8(ptr, byte(mod(value, 10), HEX_DIGITS))
                }
                value /= 10;
                if (value == 0) break;
            }
            return buffer;
        }
    }

    /**
     * @dev Converts a `int256` to its ASCII `string` decimal representation.
     */
    function toStringSigned(int256 value) internal pure returns (string memory) {
        return string.concat(value < 0 ? "-" : "", toString(SignedMath.abs(value)));
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        unchecked {
            return toHexString(value, Math.log256(value) + 1);
        }
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        uint256 localValue = value;
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = HEX_DIGITS[localValue & 0xf];
            localValue >>= 4;
        }
        if (localValue != 0) {
            revert StringsInsufficientHexLength(value, length);
        }
        return string(buffer);
    }

    /**
     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal
     * representation.
     */
    function toHexString(address addr) internal pure returns (string memory) {
        return toHexString(uint256(uint160(addr)), ADDRESS_LENGTH);
    }

    /**
     * @dev Returns true if the two strings are equal.
     */
    function equal(string memory a, string memory b) internal pure returns (bool) {
        return bytes(a).length == bytes(b).length && keccak256(bytes(a)) == keccak256(bytes(b));
    }
}

// SPDX-License-Identifier: UNLICENSED
pragma solidity 0.8.20;

import '@openzeppelin/contracts/token/ERC20/ERC20.sol';

contract Grape is ERC20 {
    constructor(address preMintWallet_) ERC20('Grape coin', 'GRAPE') {
        _mint(preMintWallet_, 2_000_000_000 * 10 ** decimals());
    }
}

// SPDX-License-Identifier: UNLICENSED
pragma solidity 0.8.20;

import '@openzeppelin/contracts/access/Ownable.sol';
import '@openzeppelin/contracts/token/ERC20/IERC20.sol';
import '@openzeppelin/contracts/utils/cryptography/MessageHashUtils.sol';
import '@openzeppelin/contracts/utils/cryptography/SignatureChecker.sol';

contract GrapePublicVesting is Ownable {
    /**
     * @dev Public immutable state
     */
    IERC20 public immutable grapeToken;
    uint256 public immutable tgeUnlockPercent = 25;
    uint256 public immutable bonusPercent = 10;
    address public immutable signerWallet;
    uint256 public immutable signatureValidity = 1 hours;

    /**
     * @dev Public mutable state
     */
    uint256 public tgeDate;
    uint256 public vestingEndDate;
    mapping(address investor => uint256 amountWithoutBonus) public withdraws; // managed internally

    /**
     * @notice Emitted when a investor withdraws
     */
    event Withdraw(
        address indexed investor,
        uint256 amount,
        uint256 bonusAmount
    );

    /**
     * @dev Errors
     */
    error ExpiredSignature();
    error InvalidSignature();
    error TGEPending();
    error ZeroWithdrawAmount();

    /**
     * @notice Initializes a new Grape Token Vesting contract.
     * @dev Sets up the Grape token vesting contract with the specified parameters.
     *      This includes the Grape token address, the initial owner of the contract, the TGE (Token Generation Event) date,
     *      the end date for the vesting period, and the signer wallet address.
     *      The constructor sets the initial state of the contract and transfers ownership to the specified initial owner.
     * @param grapeToken_ The address of the Grape ERC20 token that will be vested through this contract.
     * @param initialOwner_ The address of the initial owner of the contract, typically the deployer or the main administrative account.
     * @param tgeDate_ The date of the Token Generation Event (TGE), represented as a Unix timestamp,
     *        indicating when token distribution begins.
     * @param vestingEndDate_ The end date of the vesting period, represented as a Unix timestamp.
     * @param signerWallet_ The address of the wallet used for signing transactions or authorizations related to this contract.
     */
    constructor(
        address grapeToken_,
        address initialOwner_,
        uint256 tgeDate_,
        uint256 vestingEndDate_,
        address signerWallet_
    ) Ownable(initialOwner_) {
        grapeToken = IERC20(grapeToken_);
        tgeDate = tgeDate_;
        vestingEndDate = vestingEndDate_;
        signerWallet = signerWallet_;
    }

    /**
     * @dev Public functions
     */

    /**
     * @notice Calculates the amount of tokens that have vested for a user based on their NFT and referral purchases.
     * @dev This function computes the vested token amount using a linear vesting schedule. It takes into account
     *      both NFT and referral purchases. The vested amount depends on whether the cliff period has ended and
     *      if the vesting period is still ongoing.
     *      - If the cliff period (TGE date) hasn't started, no tokens are vested.
     *      - If the vesting period has ended, the total of NFT and referral purchases is returned.
     *      - Otherwise, a linear vesting calculation is applied.
     * @param nftAmountPurchased_ The total amount of tokens purchased through NFTs.
     * @param referralAmountPurchased_ The total amount of tokens purchased using referral codes.
     * @return uint256 The total vested amount of tokens for the given purchases at the current time.
     */
    function vestedAmount(
        uint256 nftAmountPurchased_,
        uint256 referralAmountPurchased_
    ) public view returns (uint256) {
        // check if cliff period has ended
        if (block.timestamp < tgeDate) return 0;

        // check if vesting period has ended
        if (block.timestamp >= vestingEndDate)
            return nftAmountPurchased_ + referralAmountPurchased_;

        // calculate vested amount using a linear vesting schedule
        uint256 _allowance = nftAmountPurchased_ + referralAmountPurchased_;
        return
            ((_allowance * tgeUnlockPercent) / 100) + // 25% unlocked at TGE
            (((_allowance * (100 - tgeUnlockPercent)) / 100) * // rest linearly unlocked
                (block.timestamp - tgeDate)) /
            (vestingEndDate - tgeDate);
    }

    /**
     * @notice Calculates the amount of tokens that an investor can currently withdraw, excluding any bonus amounts.
     * @dev This function determines the withdrawable amount by subtracting the total amount already withdrawn
     *      by the investor from their total vested amount. The vested amount is calculated based on the sum of
     *      NFT and referral purchases. This function does not account for any additional bonuses that might apply.
     * @param investor_ The address of the investor for whom the withdrawable amount is being calculated.
     * @param nftAmountPurchased_ The total amount of tokens purchased by the investor through NFTs.
     * @param referralAmountPurchased_ The total amount of tokens purchased by the investor using referral codes.
     * @return uint256 The total amount of tokens that the investor can withdraw at the current time,
     * excluding any bonus amounts.
     */
    function withdrawableAmountWithoutBonus(
        address investor_,
        uint256 nftAmountPurchased_,
        uint256 referralAmountPurchased_
    ) public view returns (uint256) {
        return
            vestedAmount(nftAmountPurchased_, referralAmountPurchased_) -
            withdraws[investor_];
    }

    /**
     * @notice Allows an investor to withdraw their vested tokens, with an option to apply a bonus.
     * @dev This function enables investors to withdraw their vested tokens based on their NFT and referral purchases.
     *      It checks the validity of a signature to authorize the withdrawal, ensures the token generation event (TGE) has occurred,
     *      and calculates the amount to withdraw, potentially including a bonus.
     *      - The signature is validated for expiry and authenticity.
     *      - The function reverts if the TGE hasn't occurred or if the signature is invalid or expired.
     *      - If there's nothing to withdraw, it also reverts.
     * @param nftAmountPurchased_ The amount of tokens purchased through NFTs by the investor.
     * @param referralAmountPurchased_ The amount of tokens purchased using referral codes by the investor.
     * @param applyBonus_ A boolean indicating whether to apply a bonus to the withdrawal amount.
     * @param signature_ The signature to validate the withdrawal request.
     * @param signatureTimestamp_ The timestamp associated with the signature.
     */
    function withdraw(
        uint256 nftAmountPurchased_,
        uint256 referralAmountPurchased_,
        bool applyBonus_,
        bytes calldata signature_,
        uint256 signatureTimestamp_
    ) external {
        // check signature is not expired
        if (block.timestamp > signatureTimestamp_ + signatureValidity) {
            revert ExpiredSignature();
        }

        // check signature is signed by signerWallet
        if (
            !SignatureChecker.isValidSignatureNow(
                signerWallet,
                MessageHashUtils.toEthSignedMessageHash(
                    keccak256(
                        abi.encodePacked(
                            msg.sender,
                            signatureTimestamp_,
                            nftAmountPurchased_,
                            referralAmountPurchased_,
                            applyBonus_
                        )
                    )
                ),
                signature_
            )
        ) {
            revert InvalidSignature();
        }

        // check if token generation event is reached
        if (block.timestamp < tgeDate) {
            revert TGEPending();
        }

        // calculate withdrawable amount without bonus
        uint256 _withdrawableAmountWithoutBonus = withdrawableAmountWithoutBonus(
                msg.sender,
                nftAmountPurchased_,
                referralAmountPurchased_
            );

        // check if there is anything to withdraw
        if (_withdrawableAmountWithoutBonus == 0) {
            revert ZeroWithdrawAmount();
        }

        // update withdraws state
        withdraws[msg.sender] += _withdrawableAmountWithoutBonus;

        // calculate bonus amount
        uint256 _bonusAmount = applyBonus_
            ? (((_withdrawableAmountWithoutBonus * bonusPercent) / 100) *
                nftAmountPurchased_) /
                (nftAmountPurchased_ + referralAmountPurchased_) // apply bonus only on nftAmountPurchased
            : 0;

        // transfer tokens
        grapeToken.transfer(
            msg.sender,
            _withdrawableAmountWithoutBonus + _bonusAmount
        );

        // emit event
        emit Withdraw(
            msg.sender,
            _withdrawableAmountWithoutBonus,
            _bonusAmount
        );
    }

    /**
     * @dev Only owner functions
     */

    /**
     * @notice Updates the Token Generation Event (TGE) date of the contract.
     * @dev Allows the contract owner to change the TGE date. This function can only be called by the owner.
     *      Changing the TGE date affects when investors can start withdrawing their vested tokens.
     * @param tgeDate_ The new TGE date, represented as a Unix timestamp.
     */
    function changeTgeDate(uint256 tgeDate_) external onlyOwner {
        tgeDate = tgeDate_;
    }

    /**
     * @notice Sets a new vesting end date for the contract.
     * @dev This function allows the contract owner to update the end date of the vesting period.
     *      It can only be called by the contract owner. Changing the vesting end date affects when the vesting period
     *      concludes and, as a result, impacts how vested amounts are calculated for investors.
     * @param vestingEndDate_ The new vesting end date, represented as a Unix timestamp.
     */
    function changeVestingEndDate(uint256 vestingEndDate_) external onlyOwner {
        vestingEndDate = vestingEndDate_;
    }

    /**
     * @notice Allows the contract owner to withdraw all Grape tokens held by the contract.
     * @dev This function enables the owner of the contract to transfer all Grape tokens currently stored in the contract
     *      to their own address. It's a mechanism for retrieving tokens from the contract, possibly for redistribution or other purposes.
     *      The transfer is executed via the Grape token's `transfer` method.
     */
    function withdrawAllGrapeToken() external onlyOwner {
        grapeToken.transfer(owner(), grapeToken.balanceOf(address(this)));
    }
}

// SPDX-License-Identifier: UNLICENSED
pragma solidity 0.8.20;

import '@openzeppelin/contracts/token/ERC20/IERC20.sol';
import '@openzeppelin/contracts/access/Ownable.sol';

contract GrapeVesting is Ownable {
    /**
     * @dev Public immutable state
     */
    IERC20 public immutable grapeToken;
    uint256 public immutable cliffUnlockPercent = 5;
    mapping(address investor => uint256 amount) public allowances;

    /**
     * @dev Public mutable state
     */
    uint256 public cliffEndDate;
    uint256 public vestingEndDate;
    mapping(address investor => uint256 amount) public withdraws; // managed internally

    /**
     * @notice Emitted when a investor withdraws
     */
    event Withdraw(address indexed investor, uint256 amount);

    /**
     * @dev Errors
     */
    error LengthMismatch();
    error CliffPending();
    error ZeroWithdrawAmount();

    /**
     * @notice Constructs a new GrapeVesting contract, initializing investor allowances and vesting parameters.
     * @dev Initializes the contract with Grape token address, vesting parameters, and investor allowances.
     *      It sets up a vesting schedule for each investor, specifying how much they are allowed to withdraw and when.
     *      This constructor also transfers the ownership of the contract to the specified initial owner.
     *      The constructor will revert if the lengths of the investors and allowances arrays do not match.
     * @param grapeToken_ The address of the Grape ERC20 token to be vested.
     * @param initialOwner_ The initial owner of the contract, responsible for administrative functions.
     * @param cliffEndDate_ The Unix timestamp representing the end date of the cliff period, after which vesting begins.
     * @param vestingEndDate_ The Unix timestamp representing the end date of the total vesting period.
     * @param investors_ An array of addresses representing investors who are eligible for vesting.
     * @param allowances_ An array of token amounts representing the allowances for each investor.
     */
    constructor(
        address grapeToken_,
        address initialOwner_,
        uint256 cliffEndDate_,
        uint256 vestingEndDate_,
        address[] memory investors_,
        uint256[] memory allowances_
    ) Ownable(initialOwner_) {
        grapeToken = IERC20(grapeToken_);
        cliffEndDate = cliffEndDate_;
        vestingEndDate = vestingEndDate_;

        if (investors_.length != allowances_.length) {
            revert LengthMismatch();
        }
        for (uint256 i = 0; i < investors_.length; i++) {
            allowances[investors_[i]] = allowances_[i];
        }
    }

    /**
     * @dev Public functions
     */

    /**
     * @notice Calculates the vested amount of tokens for a given investor based on the vesting schedule.
     * @dev This function computes the vested token amount for an investor considering the cliff period and the
     *      linear vesting schedule.
     *      - If the current time is before the cliff end date, the vested amount is 0.
     *      - If the current time is after the vesting end date, the entire allowance is considered vested.
     *      - Otherwise, a portion of the allowance is vested based on the time elapsed since the cliff end date.
     *      The vesting is linear between the cliff end date and the vesting end date.
     * @param investor_ The address of the investor for whom to calculate the vested amount.
     * @return uint256 The amount of tokens that have vested for the given investor as of now.
     */
    function vestedAmount(address investor_) public view returns (uint256) {
        // check if cliff period has ended
        if (block.timestamp < cliffEndDate) return 0;

        // check if vesting period has ended
        if (block.timestamp >= vestingEndDate) return allowances[investor_];

        // calculate vested amount using a linear vesting schedule
        return
            ((allowances[investor_] * cliffUnlockPercent) / 100) + // 5% unlocked at cliff
            ((((allowances[investor_] * (100 - cliffUnlockPercent)) / 100) * // rest linearly unlocked
                (block.timestamp - cliffEndDate)) /
                (vestingEndDate - cliffEndDate));
    }

    /**
     * @notice Calculates the amount of tokens that an investor can currently withdraw.
     * @dev Determines the withdrawable amount by subtracting the total amount already withdrawn
     *      by the investor from their vested amount. The vested amount is calculated based on the vesting schedule
     *      and the investor's total token allowance.
     * @param investor_ The address of the investor for whom to calculate the withdrawable amount.
     * @return uint256 The total amount of tokens that the investor can withdraw at the current time.
     */
    function withdrawableAmount(
        address investor_
    ) public view returns (uint256) {
        return vestedAmount(investor_) - withdraws[investor_];
    }

    /**
     * @notice Allows an investor to withdraw their vested tokens.
     * @dev This function enables an investor to withdraw the amount of tokens that have vested for them
     *      as of the current time. It checks if the cliff period has ended and if the investor has any tokens available to withdraw.
     *      The function updates the state to reflect the withdrawal and transfers the vested tokens to the investor.
     *      It reverts if the cliff period hasn't ended or if there are no tokens available for withdrawal.
     */
    function withdraw() external {
        // check if cliff period has ended
        if (block.timestamp < cliffEndDate) {
            revert CliffPending();
        }

        // calculate withdrawable amount
        uint256 _withdrawableAmount = withdrawableAmount(msg.sender);

        // check if there is anything to withdraw
        if (_withdrawableAmount == 0) {
            revert ZeroWithdrawAmount();
        }

        // update withdraws state
        withdraws[msg.sender] += _withdrawableAmount;

        // transfer tokens
        grapeToken.transfer(msg.sender, _withdrawableAmount);

        // emit event
        emit Withdraw(msg.sender, _withdrawableAmount);
    }

    /**
     * @dev Only owner functions
     */

    /**
     * @notice Updates the cliff end date for the vesting schedule.
     * @dev Allows the contract owner to modify the end date of the cliff period.
     *      Changing this date affects the start of the token vesting schedule for all investors.
     *      This function can only be called by the contract owner.
     * @param cliffEndDate_ The new end date for the cliff period, specified as a Unix timestamp.
     */
    function changeCliffEndDate(uint256 cliffEndDate_) external onlyOwner {
        cliffEndDate = cliffEndDate_;
    }

    /**
     * @notice Sets a new end date for the overall vesting period.
     * @dev Allows the contract owner to update the vesting end date. This change affects the duration
     *      of the vesting period for all investors. It can only be executed by the contract owner.
     *      Changing this date impacts how vested amounts are calculated for each investor.
     * @param vestingEndDate_ The new end date for the vesting period, represented as a Unix timestamp.
     */
    function changeVestingEndDate(uint256 vestingEndDate_) external onlyOwner {
        vestingEndDate = vestingEndDate_;
    }

    /**
     * @notice Enables the contract owner to withdraw all Grape tokens held by this contract.
     * @dev This function allows the owner to transfer all the Grape tokens from the contract's balance to their own address.
     *      This action can only be performed by the contract owner.
     */
    function withdrawAllGrapeToken() external onlyOwner {
        grapeToken.transfer(owner(), grapeToken.balanceOf(address(this)));
    }
}

// SPDX-License-Identifier: CC0-1.0
pragma solidity >=0.8.13;

/**
 * @title IDelegateRegistry
 * @custom:version 2.0
 * @custom:author foobar (0xfoobar)
 * @notice A standalone immutable registry storing delegated permissions from one address to another
 */
interface IDelegateRegistry {
    /// @notice Delegation type, NONE is used when a delegation does not exist or is revoked
    enum DelegationType {
        NONE,
        ALL,
        CONTRACT,
        ERC721,
        ERC20,
        ERC1155
    }

    /// @notice Struct for returning delegations
    struct Delegation {
        DelegationType type_;
        address to;
        address from;
        bytes32 rights;
        address contract_;
        uint256 tokenId;
        uint256 amount;
    }

    /// @notice Emitted when an address delegates or revokes rights for their entire wallet
    event DelegateAll(address indexed from, address indexed to, bytes32 rights, bool enable);

    /// @notice Emitted when an address delegates or revokes rights for a contract address
    event DelegateContract(address indexed from, address indexed to, address indexed contract_, bytes32 rights, bool enable);

    /// @notice Emitted when an address delegates or revokes rights for an ERC721 tokenId
    event DelegateERC721(address indexed from, address indexed to, address indexed contract_, uint256 tokenId, bytes32 rights, bool enable);

    /// @notice Emitted when an address delegates or revokes rights for an amount of ERC20 tokens
    event DelegateERC20(address indexed from, address indexed to, address indexed contract_, bytes32 rights, uint256 amount);

    /// @notice Emitted when an address delegates or revokes rights for an amount of an ERC1155 tokenId
    event DelegateERC1155(address indexed from, address indexed to, address indexed contract_, uint256 tokenId, bytes32 rights, uint256 amount);

    /// @notice Thrown if multicall calldata is malformed
    error MulticallFailed();

    /**
     * -----------  WRITE -----------
     */

    /**
     * @notice Call multiple functions in the current contract and return the data from all of them if they all succeed
     * @param data The encoded function data for each of the calls to make to this contract
     * @return results The results from each of the calls passed in via data
     */
    function multicall(bytes[] calldata data) external payable returns (bytes[] memory results);

    /**
     * @notice Allow the delegate to act on behalf of `msg.sender` for all contracts
     * @param to The address to act as delegate
     * @param rights Specific subdelegation rights granted to the delegate, pass an empty bytestring to encompass all rights
     * @param enable Whether to enable or disable this delegation, true delegates and false revokes
     * @return delegationHash The unique identifier of the delegation
     */
    function delegateAll(address to, bytes32 rights, bool enable) external payable returns (bytes32 delegationHash);

    /**
     * @notice Allow the delegate to act on behalf of `msg.sender` for a specific contract
     * @param to The address to act as delegate
     * @param contract_ The contract whose rights are being delegated
     * @param rights Specific subdelegation rights granted to the delegate, pass an empty bytestring to encompass all rights
     * @param enable Whether to enable or disable this delegation, true delegates and false revokes
     * @return delegationHash The unique identifier of the delegation
     */
    function delegateContract(address to, address contract_, bytes32 rights, bool enable) external payable returns (bytes32 delegationHash);

    /**
     * @notice Allow the delegate to act on behalf of `msg.sender` for a specific ERC721 token
     * @param to The address to act as delegate
     * @param contract_ The contract whose rights are being delegated
     * @param tokenId The token id to delegate
     * @param rights Specific subdelegation rights granted to the delegate, pass an empty bytestring to encompass all rights
     * @param enable Whether to enable or disable this delegation, true delegates and false revokes
     * @return delegationHash The unique identifier of the delegation
     */
    function delegateERC721(address to, address contract_, uint256 tokenId, bytes32 rights, bool enable) external payable returns (bytes32 delegationHash);

    /**
     * @notice Allow the delegate to act on behalf of `msg.sender` for a specific amount of ERC20 tokens
     * @dev The actual amount is not encoded in the hash, just the existence of a amount (since it is an upper bound)
     * @param to The address to act as delegate
     * @param contract_ The address for the fungible token contract
     * @param rights Specific subdelegation rights granted to the delegate, pass an empty bytestring to encompass all rights
     * @param amount The amount to delegate, > 0 delegates and 0 revokes
     * @return delegationHash The unique identifier of the delegation
     */
    function delegateERC20(address to, address contract_, bytes32 rights, uint256 amount) external payable returns (bytes32 delegationHash);

    /**
     * @notice Allow the delegate to act on behalf of `msg.sender` for a specific amount of ERC1155 tokens
     * @dev The actual amount is not encoded in the hash, just the existence of a amount (since it is an upper bound)
     * @param to The address to act as delegate
     * @param contract_ The address of the contract that holds the token
     * @param tokenId The token id to delegate
     * @param rights Specific subdelegation rights granted to the delegate, pass an empty bytestring to encompass all rights
     * @param amount The amount of that token id to delegate, > 0 delegates and 0 revokes
     * @return delegationHash The unique identifier of the delegation
     */
    function delegateERC1155(address to, address contract_, uint256 tokenId, bytes32 rights, uint256 amount) external payable returns (bytes32 delegationHash);

    /**
     * ----------- CHECKS -----------
     */

    /**
     * @notice Check if `to` is a delegate of `from` for the entire wallet
     * @param to The potential delegate address
     * @param from The potential address who delegated rights
     * @param rights Specific rights to check for, pass the zero value to ignore subdelegations and check full delegations only
     * @return valid Whether delegate is granted to act on the from's behalf
     */
    function checkDelegateForAll(address to, address from, bytes32 rights) external view returns (bool);

    /**
     * @notice Check if `to` is a delegate of `from` for the specified `contract_` or the entire wallet
     * @param to The delegated address to check
     * @param contract_ The specific contract address being checked
     * @param from The cold wallet who issued the delegation
     * @param rights Specific rights to check for, pass the zero value to ignore subdelegations and check full delegations only
     * @return valid Whether delegate is granted to act on from's behalf for entire wallet or that specific contract
     */
    function checkDelegateForContract(address to, address from, address contract_, bytes32 rights) external view returns (bool);

    /**
     * @notice Check if `to` is a delegate of `from` for the specific `contract` and `tokenId`, the entire `contract_`, or the entire wallet
     * @param to The delegated address to check
     * @param contract_ The specific contract address being checked
     * @param tokenId The token id for the token to delegating
     * @param from The wallet that issued the delegation
     * @param rights Specific rights to check for, pass the zero value to ignore subdelegations and check full delegations only
     * @return valid Whether delegate is granted to act on from's behalf for entire wallet, that contract, or that specific tokenId
     */
    function checkDelegateForERC721(address to, address from, address contract_, uint256 tokenId, bytes32 rights) external view returns (bool);

    /**
     * @notice Returns the amount of ERC20 tokens the delegate is granted rights to act on the behalf of
     * @param to The delegated address to check
     * @param contract_ The address of the token contract
     * @param from The cold wallet who issued the delegation
     * @param rights Specific rights to check for, pass the zero value to ignore subdelegations and check full delegations only
     * @return balance The delegated balance, which will be 0 if the delegation does not exist
     */
    function checkDelegateForERC20(address to, address from, address contract_, bytes32 rights) external view returns (uint256);

    /**
     * @notice Returns the amount of a ERC1155 tokens the delegate is granted rights to act on the behalf of
     * @param to The delegated address to check
     * @param contract_ The address of the token contract
     * @param tokenId The token id to check the delegated amount of
     * @param from The cold wallet who issued the delegation
     * @param rights Specific rights to check for, pass the zero value to ignore subdelegations and check full delegations only
     * @return balance The delegated balance, which will be 0 if the delegation does not exist
     */
    function checkDelegateForERC1155(address to, address from, address contract_, uint256 tokenId, bytes32 rights) external view returns (uint256);

    /**
     * ----------- ENUMERATIONS -----------
     */

    /**
     * @notice Returns all enabled delegations a given delegate has received
     * @param to The address to retrieve delegations for
     * @return delegations Array of Delegation structs
     */
    function getIncomingDelegations(address to) external view returns (Delegation[] memory delegations);

    /**
     * @notice Returns all enabled delegations an address has given out
     * @param from The address to retrieve delegations for
     * @return delegations Array of Delegation structs
     */
    function getOutgoingDelegations(address from) external view returns (Delegation[] memory delegations);

    /**
     * @notice Returns all hashes associated with enabled delegations an address has received
     * @param to The address to retrieve incoming delegation hashes for
     * @return delegationHashes Array of delegation hashes
     */
    function getIncomingDelegationHashes(address to) external view returns (bytes32[] memory delegationHashes);

    /**
     * @notice Returns all hashes associated with enabled delegations an address has given out
     * @param from The address to retrieve outgoing delegation hashes for
     * @return delegationHashes Array of delegation hashes
     */
    function getOutgoingDelegationHashes(address from) external view returns (bytes32[] memory delegationHashes);

    /**
     * @notice Returns the delegations for a given array of delegation hashes
     * @param delegationHashes is an array of hashes that correspond to delegations
     * @return delegations Array of Delegation structs, return empty structs for nonexistent or revoked delegations
     */
    function getDelegationsFromHashes(bytes32[] calldata delegationHashes) external view returns (Delegation[] memory delegations);

    /**
     * ----------- STORAGE ACCESS -----------
     */

    /**
     * @notice Allows external contracts to read arbitrary storage slots
     */
    function readSlot(bytes32 location) external view returns (bytes32);

    /**
     * @notice Allows external contracts to read an arbitrary array of storage slots
     */
    function readSlots(bytes32[] calldata locations) external view returns (bytes32[] memory);
}

// SPDX-License-Identifier: CC0-1.0
pragma solidity ^0.8.17;

/**
 * @title An immutable registry contract to be deployed as a standalone primitive
 * @dev See EIP-5639, new project launches can read previous cold wallet -> hot wallet delegations
 * from here and integrate those permissions into their flow
 */
interface IDelegationRegistry {
    /// @notice Delegation type
    enum DelegationType {
        NONE,
        ALL,
        CONTRACT,
        TOKEN
    }

    /// @notice Info about a single delegation, used for onchain enumeration
    struct DelegationInfo {
        DelegationType type_;
        address vault;
        address delegate;
        address contract_;
        uint256 tokenId;
    }

    /// @notice Info about a single contract-level delegation
    struct ContractDelegation {
        address contract_;
        address delegate;
    }

    /// @notice Info about a single token-level delegation
    struct TokenDelegation {
        address contract_;
        uint256 tokenId;
        address delegate;
    }

    /// @notice Emitted when a user delegates their entire wallet
    event DelegateForAll(address vault, address delegate, bool value);

    /// @notice Emitted when a user delegates a specific contract
    event DelegateForContract(address vault, address delegate, address contract_, bool value);

    /// @notice Emitted when a user delegates a specific token
    event DelegateForToken(address vault, address delegate, address contract_, uint256 tokenId, bool value);

    /// @notice Emitted when a user revokes all delegations
    event RevokeAllDelegates(address vault);

    /// @notice Emitted when a user revoes all delegations for a given delegate
    event RevokeDelegate(address vault, address delegate);

    /**
     * -----------  WRITE -----------
     */

    /**
     * @notice Allow the delegate to act on your behalf for all contracts
     * @param delegate The hotwallet to act on your behalf
     * @param value Whether to enable or disable delegation for this address, true for setting and false for revoking
     */
    function delegateForAll(address delegate, bool value) external;

    /**
     * @notice Allow the delegate to act on your behalf for a specific contract
     * @param delegate The hotwallet to act on your behalf
     * @param contract_ The address for the contract you're delegating
     * @param value Whether to enable or disable delegation for this address, true for setting and false for revoking
     */
    function delegateForContract(address delegate, address contract_, bool value) external;

    /**
     * @notice Allow the delegate to act on your behalf for a specific token
     * @param delegate The hotwallet to act on your behalf
     * @param contract_ The address for the contract you're delegating
     * @param tokenId The token id for the token you're delegating
     * @param value Whether to enable or disable delegation for this address, true for setting and false for revoking
     */
    function delegateForToken(address delegate, address contract_, uint256 tokenId, bool value) external;

    /**
     * @notice Revoke all delegates
     */
    function revokeAllDelegates() external;

    /**
     * @notice Revoke a specific delegate for all their permissions
     * @param delegate The hotwallet to revoke
     */
    function revokeDelegate(address delegate) external;

    /**
     * @notice Remove yourself as a delegate for a specific vault
     * @param vault The vault which delegated to the msg.sender, and should be removed
     */
    function revokeSelf(address vault) external;

    /**
     * -----------  READ -----------
     */

    /**
     * @notice Returns all active delegations a given delegate is able to claim on behalf of
     * @param delegate The delegate that you would like to retrieve delegations for
     * @return info Array of DelegationInfo structs
     */
    function getDelegationsByDelegate(address delegate) external view returns (DelegationInfo[] memory);

    /**
     * @notice Returns an array of wallet-level delegates for a given vault
     * @param vault The cold wallet who issued the delegation
     * @return addresses Array of wallet-level delegates for a given vault
     */
    function getDelegatesForAll(address vault) external view returns (address[] memory);

    /**
     * @notice Returns an array of contract-level delegates for a given vault and contract
     * @param vault The cold wallet who issued the delegation
     * @param contract_ The address for the contract you're delegating
     * @return addresses Array of contract-level delegates for a given vault and contract
     */
    function getDelegatesForContract(address vault, address contract_) external view returns (address[] memory);

    /**
     * @notice Returns an array of contract-level delegates for a given vault's token
     * @param vault The cold wallet who issued the delegation
     * @param contract_ The address for the contract holding the token
     * @param tokenId The token id for the token you're delegating
     * @return addresses Array of contract-level delegates for a given vault's token
     */
    function getDelegatesForToken(address vault, address contract_, uint256 tokenId)
        external
        view
        returns (address[] memory);

    /**
     * @notice Returns all contract-level delegations for a given vault
     * @param vault The cold wallet who issued the delegations
     * @return delegations Array of ContractDelegation structs
     */
    function getContractLevelDelegations(address vault)
        external
        view
        returns (ContractDelegation[] memory delegations);

    /**
     * @notice Returns all token-level delegations for a given vault
     * @param vault The cold wallet who issued the delegations
     * @return delegations Array of TokenDelegation structs
     */
    function getTokenLevelDelegations(address vault) external view returns (TokenDelegation[] memory delegations);

    /**
     * @notice Returns true if the address is delegated to act on the entire vault
     * @param delegate The hotwallet to act on your behalf
     * @param vault The cold wallet who issued the delegation
     */
    function checkDelegateForAll(address delegate, address vault) external view returns (bool);

    /**
     * @notice Returns true if the address is delegated to act on your behalf for a token contract or an entire vault
     * @param delegate The hotwallet to act on your behalf
     * @param contract_ The address for the contract you're delegating
     * @param vault The cold wallet who issued the delegation
     */
    function checkDelegateForContract(address delegate, address vault, address contract_)
        external
        view
        returns (bool);

    /**
     * @notice Returns true if the address is delegated to act on your behalf for a specific token, the token's contract or an entire vault
     * @param delegate The hotwallet to act on your behalf
     * @param contract_ The address for the contract you're delegating
     * @param tokenId The token id for the token you're delegating
     * @param vault The cold wallet who issued the delegation
     */
    function checkDelegateForToken(address delegate, address vault, address contract_, uint256 tokenId)
        external
        view
        returns (bool);
}

// SPDX-License-Identifier: UNLICENSED
pragma solidity 0.8.20;

import '@openzeppelin/contracts/token/ERC721/ERC721.sol';

contract TestNFT is ERC721 {
    constructor(uint256 premint_) ERC721('NFT', 'NFT') {
        for (uint256 i = 0; i < premint_; i++) {
            _mint(msg.sender, i);
        }
    }
}

{
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "evmVersion": "paris",
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "abi"
      ]
    }
  }
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"address","name":"grapeNFTAddress_","type":"address"},{"internalType":"address","name":"initialOwner_","type":"address"},{"internalType":"address payable","name":"receiverWallet_","type":"address"},{"internalType":"bytes32","name":"referralCodeMerkleRoot_","type":"bytes32"},{"internalType":"uint256[7]","name":"config_","type":"uint256[7]"}],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[],"name":"AmountExceedsSupply","type":"error"},{"inputs":[],"name":"BelowMinimumSpend","type":"error"},{"inputs":[],"name":"Closed","type":"error"},{"inputs":[],"name":"EnforcedPause","type":"error"},{"inputs":[],"name":"ExpectedPause","type":"error"},{"inputs":[],"name":"InvalidPaymentAmount","type":"error"},{"inputs":[],"name":"InvalidReferralCode","type":"error"},{"inputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"NotTokenOwner","type":"error"},{"inputs":[{"internalType":"address","name":"owner","type":"address"}],"name":"OwnableInvalidOwner","type":"error"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"OwnableUnauthorizedAccount","type":"error"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"account","type":"address"}],"name":"Paused","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"buyer","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"PurchaseWithNFT","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"buyer","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"PurchaseWithReferralCode","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"account","type":"address"}],"name":"Unpaused","type":"event"},{"inputs":[{"internalType":"uint256[]","name":"tokenIds_","type":"uint256[]"}],"name":"buyWithNFTs","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"bytes32[]","name":"referralCode_","type":"bytes32[]"}],"name":"buyWithReferralCode","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[],"name":"capPerNFT","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"delegateRegistryV1","outputs":[{"internalType":"contract IDelegationRegistry","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"delegateRegistryV2","outputs":[{"internalType":"contract IDelegateRegistry","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"endDate","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"grapeNFT","outputs":[{"internalType":"contract IERC721","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"minimumSpendAmount","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"nftPurchases","outputs":[{"internalType":"uint256","name":"amount","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"nftSaleCap","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"nftSoldSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"nftStartDate","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"pause","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"paused","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"receiverWallet","outputs":[{"internalType":"address payable","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"referralCapPerBuyer","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"referralCodeMerkleRoot","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"buyer","type":"address"}],"name":"referralPurchases","outputs":[{"internalType":"uint256","name":"amount","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"referralStartDate","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"unpause","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"wallet_","type":"address"},{"internalType":"bytes32[]","name":"referralCode_","type":"bytes32[]"}],"name":"verifyReferralCode","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"}]

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

-----Decoded View---------------
Arg [0] : grapeNFTAddress_ (address): 0xe1dC516B1486Aba548eecD2947A11273518434a4
Arg [1] : initialOwner_ (address): 0xb6263616C46A8e92B440B728deC3aaDfb3A78012
Arg [2] : receiverWallet_ (address): 0x3b4e0b1747D2F44920d6281C751ff3a2B46a4aaC
Arg [3] : referralCodeMerkleRoot_ (bytes32): 0xdb6c7c557ca72794b249fa0c5ec78eadc86a7b1e3535de5e9c3fe0a1125aae87
Arg [4] : config_ (uint256[7]): 250000000000000000,750000000000000000,1701345600,1701360000,1701446400,50000000000000000,2148000000000000000000

-----Encoded View---------------
11 Constructor Arguments found :
Arg [0] : 000000000000000000000000e1dc516b1486aba548eecd2947a11273518434a4
Arg [1] : 000000000000000000000000b6263616c46a8e92b440b728dec3aadfb3a78012
Arg [2] : 0000000000000000000000003b4e0b1747d2f44920d6281c751ff3a2b46a4aac
Arg [3] : db6c7c557ca72794b249fa0c5ec78eadc86a7b1e3535de5e9c3fe0a1125aae87
Arg [4] : 00000000000000000000000000000000000000000000000003782dace9d90000
Arg [5] : 0000000000000000000000000000000000000000000000000a688906bd8b0000
Arg [6] : 0000000000000000000000000000000000000000000000000000000065687940
Arg [7] : 000000000000000000000000000000000000000000000000000000006568b180
Arg [8] : 00000000000000000000000000000000000000000000000000000000656a0300
Arg [9] : 00000000000000000000000000000000000000000000000000b1a2bc2ec50000
Arg [10] : 000000000000000000000000000000000000000000000074717cfb6883100000

423:10832:22:-:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;1422:32;;;;;;;;;;;;;;;;;;;160:25:28;;;148:2;133:18;1422:32:22;;;;;;;;800:34;;;;;;;;;;;;;;;9780:65;;;;;;;;;;;;;:::i;:::-;;1850:84:11;;;;;;;;;;-1:-1:-1;1897:4:11;1920:7;-1:-1:-1;;;1920:7:11;;;;1850:84;;;361:14:28;;354:22;336:41;;324:2;309:18;1850:84:11;196:187:28;926:42:22;;;;;;;;;;;;;;;1053:47;;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;568:32:28;;;550:51;;538:2;523:18;1053:47:22;388:219:28;2293:101:0;;;;;;;;;;;;;:::i;1012:35:22:-;;;;;;;;;;;;;;;9616:61;;;;;;;;;;;;;:::i;1237:129::-;;;;;;;;;;;;;;;1638:85:0;;;;;;;;;;-1:-1:-1;1684:7:0;1710:6;-1:-1:-1;;;;;1710:6:0;1638:85;;654:47:22;;;;;;;;;;;;;;;707:44;;;;;;;;;;;;;;;9125:340;;;;;;;;;;-1:-1:-1;9125:340:22;;;;;:::i;:::-;;:::i;1572:65::-;;;;;;;;;;-1:-1:-1;1572:65:22;;;;;:::i;:::-;;;;;;;;;;;;;;883:37;;;;;;;;;;;;;;;523:33;;;;;;;;;;;;;;;974:32;;;;;;;;;;;;;;;562:43;;;;;;;;;;;;;;;1106:125;;;;;;;;;;;;;;;1482:62;;;;;;;;;;-1:-1:-1;1482:62:22;;;;;:::i;:::-;;;;;;;;;;;;;;2543:215:0;;;;;;;;;;-1:-1:-1;2543:215:0;;;;;:::i;:::-;;:::i;7458:1081:22:-;;;;;;:::i;:::-;;:::i;4958:2031::-;;;;;;:::i;:::-;;:::i;9780:65::-;1531:13:0;:11;:13::i;:::-;9828:10:22::1;:8;:10::i;:::-;9780:65::o:0;2293:101:0:-;1531:13;:11;:13::i;:::-;2357:30:::1;2384:1;2357:18;:30::i;9616:61:22:-:0;1531:13:0;:11;:13::i;:::-;9662:8:22::1;:6;:8::i;9125:340::-:0;9247:4;9282:176;9318:13;;9282:176;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;9422:19:22;;;-1:-1:-1;;;;;568:32:28;;9422:19:22;;;550:51:28;9349:22:22;;-1:-1:-1;523:18:28;;-1:-1:-1;9422:19:22;;;-1:-1:-1;;9422:19:22;;;;;;;;;9412:30;;9422:19;9412:30;;;;9399:44;;;4231:19:28;4266:12;9399:44:22;;;;;;;;;;;;9389:55;;;;;;9282:18;:176::i;:::-;9263:195;9125:340;-1:-1:-1;;;;9125:340:22:o;2543:215:0:-;1531:13;:11;:13::i;:::-;-1:-1:-1;;;;;2627:22:0;::::1;2623:91;;2672:31;::::0;-1:-1:-1;;;2672:31:0;;2700:1:::1;2672:31;::::0;::::1;550:51:28::0;523:18;;2672:31:0::1;;;;;;;;2623:91;2723:28;2742:8;2723:18;:28::i;:::-;2543:215:::0;:::o;7458:1081:22:-;1474:19:11;:17;:19::i;:::-;4285:18:22::1;4273:9;:30;4269:62;;;4312:19;;-1:-1:-1::0;;;4312:19:22::1;;;;;;;;;;;4269:62;7664:17:::2;7646:15;:35;:64;;;;7703:7;7685:15;:25;7646:64;7642:110;;;7733:8;;-1:-1:-1::0;;;7733:8:22::2;;;;;;;;;;;7642:110;7808:45;7827:10;7839:13;;7808:18;:45::i;:::-;7803:105;;7876:21;;-1:-1:-1::0;;;7876:21:22::2;;;;;;;;;;;7803:105;8026:10;7977:28;8008:29:::0;;;:17:::2;:29;::::0;;;;;:53:::2;::::0;8052:9:::2;::::0;8008:53:::2;:::i;:::-;7977:84;;8171:19;8148:20;:42;8144:102;;;8213:22;;-1:-1:-1::0;;;8213:22:22::2;;;;;;;;;;;8144:102;8325:10;8307:29;::::0;;;:17:::2;:29;::::0;;;;;:52;;;8413:34;:14:::2;-1:-1:-1::0;;;;;8413:23:22::2;::::0;8437:9:::2;8413:34:::0;::::2;;;::::0;8437:9;;8413:34;8307:29;8413:34;8437:9;8413:23;:34;::::2;;;;;;;;;;;;;::::0;::::2;;;;;-1:-1:-1::0;8485:47:22::2;::::0;8522:9:::2;160:25:28::0;;8510:10:22::2;::::0;8485:47:::2;::::0;148:2:28;133:18;8485:47:22::2;;;;;;;7584:955;7458:1081:::0;;:::o;4958:2031::-;1474:19:11;:17;:19::i;:::-;4285:18:22::1;4273:9;:30;4269:62;;;4312:19;;-1:-1:-1::0;;;4312:19:22::1;;;;;;;;;;;4269:62;5147:12:::2;5129:15;:30;:59;;;;5181:7;5163:15;:25;5129:59;5125:105;;;5211:8;;-1:-1:-1::0;;;5211:8:22::2;;;;;;;;;;;5125:105;5281:25;5325:9;5309:13;;:25;;;;:::i;:::-;5281:53;;5440:10;5420:17;:30;5416:89;;;5473:21;;-1:-1:-1::0;;;5473:21:22::2;;;;;;;;;;;5416:89;5549:13;:33:::0;;;5633:23:::2;::::0;5727:924:::2;5744:16;5763:9;;5773:2;5763:13;;;;;;;:::i;:::-;;;;;;;5744:32;;5840:27;5858:8;5840:17;:27::i;:::-;5930:26;5959:22:::0;;;:12:::2;:22;::::0;;;;;;6083:291:::2;6109:30;5959:22:::0;6109:9:::2;:30;:::i;:::-;6235:27;6247:15:::0;6235:9:::2;:27;:::i;:::-;6083:8;:291::i;:::-;6062:312:::0;-1:-1:-1;6461:31:22::2;6062:312:::0;6461:18;:31:::2;:::i;:::-;6436:22;::::0;;;:12:::2;:22;::::0;;;;:56;6547:29:::2;6566:10:::0;6547:29;::::2;:::i;:::-;::::0;-1:-1:-1;6602:9:22;;-1:-1:-1;6595:4:22::2;::::0;-1:-1:-1;6595:4:22;;-1:-1:-1;6595:4:22::2;:::i;:::-;;;;:23;:54;;;;;6640:9;6622:15;:27;6595:54;5727:924;;6742:9;6723:15;:28;6719:88;;6774:22;;-1:-1:-1::0;;;6774:22:22::2;;;;;;;;;;;6719:88;6860:40;::::0;-1:-1:-1;;;;;6860:14:22::2;:23;::::0;:40;::::2;;;::::0;6884:15;;6860:40:::2;::::0;;;6884:15;6860:23;:40;::::2;;;;;;;;;;;;;::::0;::::2;;;;;-1:-1:-1::0;6938:44:22::2;::::0;160:25:28;;;6954:10:22::2;::::0;6938:44:::2;::::0;148:2:28;133:18;6938:44:22::2;;;;;;;5072:1917;;;4958:2031:::0;;:::o;1796:162:0:-;1684:7;1710:6;-1:-1:-1;;;;;1710:6:0;735:10:10;1855:23:0;1851:101;;1901:40;;-1:-1:-1;;;1901:40:0;;735:10:10;1901:40:0;;;550:51:28;523:18;;1901:40:0;388:219:28;2710:117:11;1721:16;:14;:16::i;:::-;2778:5:::1;2768:15:::0;;-1:-1:-1;;;;2768:15:11::1;::::0;;2798:22:::1;735:10:10::0;2807:12:11::1;2798:22;::::0;-1:-1:-1;;;;;568:32:28;;;550:51;;538:2;523:18;2798:22:11::1;;;;;;;2710:117::o:0;2912:187:0:-;2985:16;3004:6;;-1:-1:-1;;;;;3020:17:0;;;-1:-1:-1;;;;;;3020:17:0;;;;;;3052:40;;3004:6;;;;;;;3052:40;;2985:16;3052:40;2975:124;2912:187;:::o;2463:115:11:-;1474:19;:17;:19::i;:::-;2522:7:::1;:14:::0;;-1:-1:-1;;;;2522:14:11::1;-1:-1:-1::0;;;2522:14:11::1;::::0;;2551:20:::1;2558:12;735:10:10::0;;656:96;1265:154:14;1356:4;1408;1379:25;1392:5;1399:4;1379:12;:25::i;:::-;:33;;1265:154;-1:-1:-1;;;;1265:154:14:o;2002:128:11:-;1897:4;1920:7;-1:-1:-1;;;1920:7:11;;;;2063:61;;;2098:15;;-1:-1:-1;;;2098:15:11;;;;;;;;;;;10423:830:22;10514:26;;-1:-1:-1;;;10514:26:22;;;;;160:25:28;;;10492:19:22;;10514:8;-1:-1:-1;;;;;10514:16:22;;;;133:18:28;;10514:26:22;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;10492:48;-1:-1:-1;10603:10:22;-1:-1:-1;;;;;10588:25:22;;;10584:38;;10615:7;10423:830;:::o;10584:38::-;10692:193;;-1:-1:-1;;;10692:193:22;;10751:10;10692:193;;;5572:34:28;-1:-1:-1;;;;;5642:15:28;;;5622:18;;;5615:43;10816:8:22;5694:15:28;;5674:18;;;5667:43;5726:18;;;5719:34;;;-1:-1:-1;5769:19:28;;;5762:31;10692:18:22;:41;;;;5506:19:28;;10692:193:22;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;10675:228;;;10896:7;10423:830;:::o;10675:228::-;10973:172;;-1:-1:-1;;;10973:172:22;;11031:10;10973:172;;;6355:34:28;-1:-1:-1;;;;;6425:15:28;;;6405:18;;;6398:43;11096:8:22;6477:15:28;;6457:18;;;6450:43;6509:18;;;6502:34;;;10973:18:22;:40;;;;6289:19:28;;10973:172:22;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;10956:207;;;11156:7;10423:830;:::o;10956:207::-;11223:23;;-1:-1:-1;;;11223:23:22;;;;;160:25:28;;;133:18;;11223:23:22;14:177:28;2557:104:19;2615:7;2645:1;2641;:5;:13;;2653:1;2641:13;;;2649:1;2641:13;2634:20;;2557:104;;;;;:::o;2202:126:11:-;1897:4;1920:7;-1:-1:-1;;;1920:7:11;;;;2260:62;;2296:15;;-1:-1:-1;;;2296:15:11;;;;;;;;;;;1967:290:14;2050:7;2092:4;2050:7;2106:116;2130:5;:12;2126:1;:16;2106:116;;;2178:33;2188:12;2202:5;2208:1;2202:8;;;;;;;;:::i;:::-;;;;;;;2178:9;:33::i;:::-;2163:48;-1:-1:-1;2144:3:14;;;;:::i;:::-;;;;2106:116;;;-1:-1:-1;2238:12:14;1967:290;-1:-1:-1;;;1967:290:14:o;9229:147::-;9292:7;9322:1;9318;:5;:51;;9564:13;9655:15;;;9690:4;9683:15;;;9736:4;9720:21;;9318:51;;;9564:13;9655:15;;;9690:4;9683:15;;;9736:4;9720:21;;9326:20;9496:261;1238:131:28;-1:-1:-1;;;;;1313:31:28;;1303:42;;1293:70;;1359:1;1356;1349:12;1374:367;1437:8;1447:6;1501:3;1494:4;1486:6;1482:17;1478:27;1468:55;;1519:1;1516;1509:12;1468:55;-1:-1:-1;1542:20:28;;1585:18;1574:30;;1571:50;;;1617:1;1614;1607:12;1571:50;1654:4;1646:6;1642:17;1630:29;;1714:3;1707:4;1697:6;1694:1;1690:14;1682:6;1678:27;1674:38;1671:47;1668:67;;;1731:1;1728;1721:12;1668:67;1374:367;;;;;:::o;1746:572::-;1841:6;1849;1857;1910:2;1898:9;1889:7;1885:23;1881:32;1878:52;;;1926:1;1923;1916:12;1878:52;1965:9;1952:23;1984:31;2009:5;1984:31;:::i;:::-;2034:5;-1:-1:-1;2090:2:28;2075:18;;2062:32;2117:18;2106:30;;2103:50;;;2149:1;2146;2139:12;2103:50;2188:70;2250:7;2241:6;2230:9;2226:22;2188:70;:::i;:::-;1746:572;;2277:8;;-1:-1:-1;2162:96:28;;-1:-1:-1;;;;1746:572:28:o;2323:247::-;2382:6;2435:2;2423:9;2414:7;2410:23;2406:32;2403:52;;;2451:1;2448;2441:12;2403:52;2490:9;2477:23;2509:31;2534:5;2509:31;:::i;:::-;2559:5;2323:247;-1:-1:-1;;;2323:247:28:o;3033:180::-;3092:6;3145:2;3133:9;3124:7;3120:23;3116:32;3113:52;;;3161:1;3158;3151:12;3113:52;-1:-1:-1;3184:23:28;;3033:180;-1:-1:-1;3033:180:28:o;3218:437::-;3304:6;3312;3365:2;3353:9;3344:7;3340:23;3336:32;3333:52;;;3381:1;3378;3371:12;3333:52;3421:9;3408:23;3454:18;3446:6;3443:30;3440:50;;;3486:1;3483;3476:12;3440:50;3525:70;3587:7;3578:6;3567:9;3563:22;3525:70;:::i;:::-;3614:8;;3499:96;;-1:-1:-1;3218:437:28;-1:-1:-1;;;;3218:437:28:o;4289:127::-;4350:10;4345:3;4341:20;4338:1;4331:31;4381:4;4378:1;4371:15;4405:4;4402:1;4395:15;4421:125;4486:9;;;4507:10;;;4504:36;;;4520:18;;:::i;4551:127::-;4612:10;4607:3;4603:20;4600:1;4593:31;4643:4;4640:1;4633:15;4667:4;4664:1;4657:15;4683:128;4750:9;;;4771:11;;;4768:37;;;4785:18;;:::i;4816:135::-;4855:3;4876:17;;;4873:43;;4896:18;;:::i;:::-;-1:-1:-1;4943:1:28;4932:13;;4816:135::o;4956:251::-;5026:6;5079:2;5067:9;5058:7;5054:23;5050:32;5047:52;;;5095:1;5092;5085:12;5047:52;5127:9;5121:16;5146:31;5171:5;5146:31;:::i;5804:277::-;5871:6;5924:2;5912:9;5903:7;5899:23;5895:32;5892:52;;;5940:1;5937;5930:12;5892:52;5972:9;5966:16;6025:5;6018:13;6011:21;6004:5;6001:32;5991:60;;6047:1;6044;6037:12

ipfs://09733d6a2fc7b689de8a8d5e460b5a89c0e95f1856f1a6ed7a637b6f2744394d