Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Is this a proxy?
• Similar
• Sol2Uml
• Submit Audit
• Compare

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.20;

import "@openzeppelin/contracts-upgradeable/proxy/utils/Initializable.sol";
import "@openzeppelin/contracts-upgradeable/proxy/utils/UUPSUpgradeable.sol";
import "@openzeppelin/contracts-upgradeable/access/OwnableUpgradeable.sol";

/**
 * @title AddressRecovery
 * @notice UUPS upgradeable contract to recover funds sent to wrong address
 * @dev Deploy multiple times with same nonce to reach target address
 */
contract AddressRecovery is Initializable, UUPSUpgradeable, OwnableUpgradeable {

    event FundsRecovered(address indexed token, uint256 amount, address indexed to);
    event ETHRecovered(uint256 amount, address indexed to);
    event NonceSet(uint256 newNonce);

    uint256 private currentNonce;

    /// @custom:oz-upgrades-unsafe-allow constructor
    constructor() {
        _disableInitializers();
    }

    /**
     * @notice Initialize the contract
     * @param _owner The owner address
     */
    function initialize(address _owner) public initializer {
        require(_owner != address(0), "Invalid owner");
        __Ownable_init(_owner);
        __UUPSUpgradeable_init();
    }

    /**
     * @notice Recover ERC20 tokens (including USDT)
     * @param token The token contract address
     * @param to The destination address
     * @param amount The amount to transfer
     */
    function recoverToken(
        address token,
        address to,
        uint256 amount
    ) public onlyOwner {
        require(to != address(0), "Invalid recipient");
        require(token != address(0), "Invalid token");

        // Use low-level call to support non-standard tokens like USDT
        (bool success, bytes memory data) = token.call(
            abi.encodeWithSelector(0xa9059cbb, to, amount) // transfer(address,uint256)
        );

        require(success && (data.length == 0 || abi.decode(data, (bool))), "Transfer failed");
        emit FundsRecovered(token, amount, to);
    }

    /**
     * @notice Recover all tokens of a specific type
     * @param token The token contract address
     * @param to The destination address
     */
    function recoverAllTokens(address token, address to) external onlyOwner {
        uint256 balance = getTokenBalance(token);
        require(balance > 0, "No tokens to recover");
        recoverToken(token, to, balance);
    }

    /**
     * @notice Recover ETH/native token
     * @param to The destination address
     */
    function recoverETH(address payable to) external onlyOwner {
        require(to != address(0), "Invalid recipient");

        uint256 balance = address(this).balance;
        require(balance > 0, "No ETH to recover");

        (bool success, ) = to.call{value: balance}("");
        require(success, "ETH transfer failed");

        emit ETHRecovered(balance, to);
    }

    /**
     * @notice Get ERC20 token balance
     * @param token The token contract address
     */
    function getTokenBalance(address token) public view returns (uint256) {
        (bool success, bytes memory data) = token.staticcall(
            abi.encodeWithSelector(0x70a08231, address(this)) // balanceOf(address)
        );

        if (!success || data.length == 0) return 0;
        return abi.decode(data, (uint256));
    }

    /**
     * @notice Get contract information
     */
    function getContractInfo() external view returns (
        address contractAddress,
        address ownerAddress,
        uint256 ethBalance,
        uint256 nonce
    ) {
        return (
            address(this),
            owner(),
            address(this).balance,
            currentNonce
        );
    }

    /**
     * @notice Set nonce for tracking deployments
     * @param _nonce The new nonce value
     */
    function setNonce(uint256 _nonce) external onlyOwner {
        currentNonce = _nonce;
        emit NonceSet(_nonce);
    }

    /**
     * @notice Get current nonce
     */
    function getNonce() external view returns (uint256) {
        return currentNonce;
    }

    /**
     * @notice Required by UUPS pattern
     */
    function _authorizeUpgrade(address newImplementation)
        internal
        override
        onlyOwner
    {}

    /**
     * @notice Get implementation version
     */
    function version() external pure returns (string memory) {
        return "1.0.0";
    }

    // Allow receiving ETH
    receive() external payable {}
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.3.0) (proxy/utils/Initializable.sol)

pragma solidity ^0.8.20;

/**
 * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
 * behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an
 * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
 * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
 *
 * The initialization functions use a version number. Once a version number is used, it is consumed and cannot be
 * reused. This mechanism prevents re-execution of each "step" but allows the creation of new initialization steps in
 * case an upgrade adds a module that needs to be initialized.
 *
 * For example:
 *
 * [.hljs-theme-light.nopadding]
 * ```solidity
 * contract MyToken is ERC20Upgradeable {
 *     function initialize() initializer public {
 *         __ERC20_init("MyToken", "MTK");
 *     }
 * }
 *
 * contract MyTokenV2 is MyToken, ERC20PermitUpgradeable {
 *     function initializeV2() reinitializer(2) public {
 *         __ERC20Permit_init("MyToken");
 *     }
 * }
 * ```
 *
 * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
 * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.
 *
 * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
 * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
 *
 * [CAUTION]
 * ====
 * Avoid leaving a contract uninitialized.
 *
 * An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation
 * contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke
 * the {_disableInitializers} function in the constructor to automatically lock it when it is deployed:
 *
 * [.hljs-theme-light.nopadding]
 * ```
 * /// @custom:oz-upgrades-unsafe-allow constructor
 * constructor() {
 *     _disableInitializers();
 * }
 * ```
 * ====
 */
abstract contract Initializable {
    /**
     * @dev Storage of the initializable contract.
     *
     * It's implemented on a custom ERC-7201 namespace to reduce the risk of storage collisions
     * when using with upgradeable contracts.
     *
     * @custom:storage-location erc7201:openzeppelin.storage.Initializable
     */
    struct InitializableStorage {
        /**
         * @dev Indicates that the contract has been initialized.
         */
        uint64 _initialized;
        /**
         * @dev Indicates that the contract is in the process of being initialized.
         */
        bool _initializing;
    }

    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.Initializable")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant INITIALIZABLE_STORAGE = 0xf0c57e16840df040f15088dc2f81fe391c3923bec73e23a9662efc9c229c6a00;

    /**
     * @dev The contract is already initialized.
     */
    error InvalidInitialization();

    /**
     * @dev The contract is not initializing.
     */
    error NotInitializing();

    /**
     * @dev Triggered when the contract has been initialized or reinitialized.
     */
    event Initialized(uint64 version);

    /**
     * @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope,
     * `onlyInitializing` functions can be used to initialize parent contracts.
     *
     * Similar to `reinitializer(1)`, except that in the context of a constructor an `initializer` may be invoked any
     * number of times. This behavior in the constructor can be useful during testing and is not expected to be used in
     * production.
     *
     * Emits an {Initialized} event.
     */
    modifier initializer() {
        // solhint-disable-next-line var-name-mixedcase
        InitializableStorage storage $ = _getInitializableStorage();

        // Cache values to avoid duplicated sloads
        bool isTopLevelCall = !$._initializing;
        uint64 initialized = $._initialized;

        // Allowed calls:
        // - initialSetup: the contract is not in the initializing state and no previous version was
        //                 initialized
        // - construction: the contract is initialized at version 1 (no reinitialization) and the
        //                 current contract is just being deployed
        bool initialSetup = initialized == 0 && isTopLevelCall;
        bool construction = initialized == 1 && address(this).code.length == 0;

        if (!initialSetup && !construction) {
            revert InvalidInitialization();
        }
        $._initialized = 1;
        if (isTopLevelCall) {
            $._initializing = true;
        }
        _;
        if (isTopLevelCall) {
            $._initializing = false;
            emit Initialized(1);
        }
    }

    /**
     * @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the
     * contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be
     * used to initialize parent contracts.
     *
     * A reinitializer may be used after the original initialization step. This is essential to configure modules that
     * are added through upgrades and that require initialization.
     *
     * When `version` is 1, this modifier is similar to `initializer`, except that functions marked with `reinitializer`
     * cannot be nested. If one is invoked in the context of another, execution will revert.
     *
     * Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in
     * a contract, executing them in the right order is up to the developer or operator.
     *
     * WARNING: Setting the version to 2**64 - 1 will prevent any future reinitialization.
     *
     * Emits an {Initialized} event.
     */
    modifier reinitializer(uint64 version) {
        // solhint-disable-next-line var-name-mixedcase
        InitializableStorage storage $ = _getInitializableStorage();

        if ($._initializing || $._initialized >= version) {
            revert InvalidInitialization();
        }
        $._initialized = version;
        $._initializing = true;
        _;
        $._initializing = false;
        emit Initialized(version);
    }

    /**
     * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the
     * {initializer} and {reinitializer} modifiers, directly or indirectly.
     */
    modifier onlyInitializing() {
        _checkInitializing();
        _;
    }

    /**
     * @dev Reverts if the contract is not in an initializing state. See {onlyInitializing}.
     */
    function _checkInitializing() internal view virtual {
        if (!_isInitializing()) {
            revert NotInitializing();
        }
    }

    /**
     * @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call.
     * Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized
     * to any version. It is recommended to use this to lock implementation contracts that are designed to be called
     * through proxies.
     *
     * Emits an {Initialized} event the first time it is successfully executed.
     */
    function _disableInitializers() internal virtual {
        // solhint-disable-next-line var-name-mixedcase
        InitializableStorage storage $ = _getInitializableStorage();

        if ($._initializing) {
            revert InvalidInitialization();
        }
        if ($._initialized != type(uint64).max) {
            $._initialized = type(uint64).max;
            emit Initialized(type(uint64).max);
        }
    }

    /**
     * @dev Returns the highest version that has been initialized. See {reinitializer}.
     */
    function _getInitializedVersion() internal view returns (uint64) {
        return _getInitializableStorage()._initialized;
    }

    /**
     * @dev Returns `true` if the contract is currently initializing. See {onlyInitializing}.
     */
    function _isInitializing() internal view returns (bool) {
        return _getInitializableStorage()._initializing;
    }

    /**
     * @dev Pointer to storage slot. Allows integrators to override it with a custom storage location.
     *
     * NOTE: Consider following the ERC-7201 formula to derive storage locations.
     */
    function _initializableStorageSlot() internal pure virtual returns (bytes32) {
        return INITIALIZABLE_STORAGE;
    }

    /**
     * @dev Returns a pointer to the storage namespace.
     */
    // solhint-disable-next-line var-name-mixedcase
    function _getInitializableStorage() private pure returns (InitializableStorage storage $) {
        bytes32 slot = _initializableStorageSlot();
        assembly {
            $.slot := slot
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.3.0) (proxy/utils/UUPSUpgradeable.sol)

pragma solidity ^0.8.22;

import {IERC1822Proxiable} from "@openzeppelin/contracts/interfaces/draft-IERC1822.sol";
import {ERC1967Utils} from "@openzeppelin/contracts/proxy/ERC1967/ERC1967Utils.sol";
import {Initializable} from "./Initializable.sol";

/**
 * @dev An upgradeability mechanism designed for UUPS proxies. The functions included here can perform an upgrade of an
 * {ERC1967Proxy}, when this contract is set as the implementation behind such a proxy.
 *
 * A security mechanism ensures that an upgrade does not turn off upgradeability accidentally, although this risk is
 * reinstated if the upgrade retains upgradeability but removes the security mechanism, e.g. by replacing
 * `UUPSUpgradeable` with a custom implementation of upgrades.
 *
 * The {_authorizeUpgrade} function must be overridden to include access restriction to the upgrade mechanism.
 */
abstract contract UUPSUpgradeable is Initializable, IERC1822Proxiable {
    /// @custom:oz-upgrades-unsafe-allow state-variable-immutable
    address private immutable __self = address(this);

    /**
     * @dev The version of the upgrade interface of the contract. If this getter is missing, both `upgradeTo(address)`
     * and `upgradeToAndCall(address,bytes)` are present, and `upgradeTo` must be used if no function should be called,
     * while `upgradeToAndCall` will invoke the `receive` function if the second argument is the empty byte string.
     * If the getter returns `"5.0.0"`, only `upgradeToAndCall(address,bytes)` is present, and the second argument must
     * be the empty byte string if no function should be called, making it impossible to invoke the `receive` function
     * during an upgrade.
     */
    string public constant UPGRADE_INTERFACE_VERSION = "5.0.0";

    /**
     * @dev The call is from an unauthorized context.
     */
    error UUPSUnauthorizedCallContext();

    /**
     * @dev The storage `slot` is unsupported as a UUID.
     */
    error UUPSUnsupportedProxiableUUID(bytes32 slot);

    /**
     * @dev Check that the execution is being performed through a delegatecall call and that the execution context is
     * a proxy contract with an implementation (as defined in ERC-1967) pointing to self. This should only be the case
     * for UUPS and transparent proxies that are using the current contract as their implementation. Execution of a
     * function through ERC-1167 minimal proxies (clones) would not normally pass this test, but is not guaranteed to
     * fail.
     */
    modifier onlyProxy() {
        _checkProxy();
        _;
    }

    /**
     * @dev Check that the execution is not being performed through a delegate call. This allows a function to be
     * callable on the implementing contract but not through proxies.
     */
    modifier notDelegated() {
        _checkNotDelegated();
        _;
    }

    function __UUPSUpgradeable_init() internal onlyInitializing {
    }

    function __UUPSUpgradeable_init_unchained() internal onlyInitializing {
    }
    /**
     * @dev Implementation of the ERC-1822 {proxiableUUID} function. This returns the storage slot used by the
     * implementation. It is used to validate the implementation's compatibility when performing an upgrade.
     *
     * IMPORTANT: A proxy pointing at a proxiable contract should not be considered proxiable itself, because this risks
     * bricking a proxy that upgrades to it, by delegating to itself until out of gas. Thus it is critical that this
     * function revert if invoked through a proxy. This is guaranteed by the `notDelegated` modifier.
     */
    function proxiableUUID() external view virtual notDelegated returns (bytes32) {
        return ERC1967Utils.IMPLEMENTATION_SLOT;
    }

    /**
     * @dev Upgrade the implementation of the proxy to `newImplementation`, and subsequently execute the function call
     * encoded in `data`.
     *
     * Calls {_authorizeUpgrade}.
     *
     * Emits an {Upgraded} event.
     *
     * @custom:oz-upgrades-unsafe-allow-reachable delegatecall
     */
    function upgradeToAndCall(address newImplementation, bytes memory data) public payable virtual onlyProxy {
        _authorizeUpgrade(newImplementation);
        _upgradeToAndCallUUPS(newImplementation, data);
    }

    /**
     * @dev Reverts if the execution is not performed via delegatecall or the execution
     * context is not of a proxy with an ERC-1967 compliant implementation pointing to self.
     */
    function _checkProxy() internal view virtual {
        if (
            address(this) == __self || // Must be called through delegatecall
            ERC1967Utils.getImplementation() != __self // Must be called through an active proxy
        ) {
            revert UUPSUnauthorizedCallContext();
        }
    }

    /**
     * @dev Reverts if the execution is performed via delegatecall.
     * See {notDelegated}.
     */
    function _checkNotDelegated() internal view virtual {
        if (address(this) != __self) {
            // Must not be called through delegatecall
            revert UUPSUnauthorizedCallContext();
        }
    }

    /**
     * @dev Function that should revert when `msg.sender` is not authorized to upgrade the contract. Called by
     * {upgradeToAndCall}.
     *
     * Normally, this function will use an xref:access.adoc[access control] modifier such as {Ownable-onlyOwner}.
     *
     * ```solidity
     * function _authorizeUpgrade(address) internal onlyOwner {}
     * ```
     */
    function _authorizeUpgrade(address newImplementation) internal virtual;

    /**
     * @dev Performs an implementation upgrade with a security check for UUPS proxies, and additional setup call.
     *
     * As a security check, {proxiableUUID} is invoked in the new implementation, and the return value
     * is expected to be the implementation slot in ERC-1967.
     *
     * Emits an {IERC1967-Upgraded} event.
     */
    function _upgradeToAndCallUUPS(address newImplementation, bytes memory data) private {
        try IERC1822Proxiable(newImplementation).proxiableUUID() returns (bytes32 slot) {
            if (slot != ERC1967Utils.IMPLEMENTATION_SLOT) {
                revert UUPSUnsupportedProxiableUUID(slot);
            }
            ERC1967Utils.upgradeToAndCall(newImplementation, data);
        } catch {
            // The implementation is not UUPS
            revert ERC1967Utils.ERC1967InvalidImplementation(newImplementation);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol)

pragma solidity ^0.8.20;

import {ContextUpgradeable} from "../utils/ContextUpgradeable.sol";
import {Initializable} from "../proxy/utils/Initializable.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * The initial owner is set to the address provided by the deployer. This can
 * later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract OwnableUpgradeable is Initializable, ContextUpgradeable {
    /// @custom:storage-location erc7201:openzeppelin.storage.Ownable
    struct OwnableStorage {
        address _owner;
    }

    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.Ownable")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant OwnableStorageLocation = 0x9016d09d72d40fdae2fd8ceac6b6234c7706214fd39c1cd1e609a0528c199300;

    function _getOwnableStorage() private pure returns (OwnableStorage storage $) {
        assembly {
            $.slot := OwnableStorageLocation
        }
    }

    /**
     * @dev The caller account is not authorized to perform an operation.
     */
    error OwnableUnauthorizedAccount(address account);

    /**
     * @dev The owner is not a valid owner account. (eg. `address(0)`)
     */
    error OwnableInvalidOwner(address owner);

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the address provided by the deployer as the initial owner.
     */
    function __Ownable_init(address initialOwner) internal onlyInitializing {
        __Ownable_init_unchained(initialOwner);
    }

    function __Ownable_init_unchained(address initialOwner) internal onlyInitializing {
        if (initialOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(initialOwner);
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        OwnableStorage storage $ = _getOwnableStorage();
        return $._owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        if (owner() != _msgSender()) {
            revert OwnableUnauthorizedAccount(_msgSender());
        }
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby disabling any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        if (newOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        OwnableStorage storage $ = _getOwnableStorage();
        address oldOwner = $._owner;
        $._owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.4.0) (interfaces/draft-IERC1822.sol)

pragma solidity >=0.4.16;

/**
 * @dev ERC-1822: Universal Upgradeable Proxy Standard (UUPS) documents a method for upgradeability through a simplified
 * proxy whose upgrades are fully controlled by the current implementation.
 */
interface IERC1822Proxiable {
    /**
     * @dev Returns the storage slot that the proxiable contract assumes is being used to store the implementation
     * address.
     *
     * IMPORTANT: A proxy pointing at a proxiable contract should not be considered proxiable itself, because this risks
     * bricking a proxy that upgrades to it, by delegating to itself until out of gas. Thus it is critical that this
     * function revert if invoked through a proxy.
     */
    function proxiableUUID() external view returns (bytes32);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.4.0) (proxy/ERC1967/ERC1967Utils.sol)

pragma solidity ^0.8.21;

import {IBeacon} from "../beacon/IBeacon.sol";
import {IERC1967} from "../../interfaces/IERC1967.sol";
import {Address} from "../../utils/Address.sol";
import {StorageSlot} from "../../utils/StorageSlot.sol";

/**
 * @dev This library provides getters and event emitting update functions for
 * https://eips.ethereum.org/EIPS/eip-1967[ERC-1967] slots.
 */
library ERC1967Utils {
    /**
     * @dev Storage slot with the address of the current implementation.
     * This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1.
     */
    // solhint-disable-next-line private-vars-leading-underscore
    bytes32 internal constant IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;

    /**
     * @dev The `implementation` of the proxy is invalid.
     */
    error ERC1967InvalidImplementation(address implementation);

    /**
     * @dev The `admin` of the proxy is invalid.
     */
    error ERC1967InvalidAdmin(address admin);

    /**
     * @dev The `beacon` of the proxy is invalid.
     */
    error ERC1967InvalidBeacon(address beacon);

    /**
     * @dev An upgrade function sees `msg.value > 0` that may be lost.
     */
    error ERC1967NonPayable();

    /**
     * @dev Returns the current implementation address.
     */
    function getImplementation() internal view returns (address) {
        return StorageSlot.getAddressSlot(IMPLEMENTATION_SLOT).value;
    }

    /**
     * @dev Stores a new address in the ERC-1967 implementation slot.
     */
    function _setImplementation(address newImplementation) private {
        if (newImplementation.code.length == 0) {
            revert ERC1967InvalidImplementation(newImplementation);
        }
        StorageSlot.getAddressSlot(IMPLEMENTATION_SLOT).value = newImplementation;
    }

    /**
     * @dev Performs implementation upgrade with additional setup call if data is nonempty.
     * This function is payable only if the setup call is performed, otherwise `msg.value` is rejected
     * to avoid stuck value in the contract.
     *
     * Emits an {IERC1967-Upgraded} event.
     */
    function upgradeToAndCall(address newImplementation, bytes memory data) internal {
        _setImplementation(newImplementation);
        emit IERC1967.Upgraded(newImplementation);

        if (data.length > 0) {
            Address.functionDelegateCall(newImplementation, data);
        } else {
            _checkNonPayable();
        }
    }

    /**
     * @dev Storage slot with the admin of the contract.
     * This is the keccak-256 hash of "eip1967.proxy.admin" subtracted by 1.
     */
    // solhint-disable-next-line private-vars-leading-underscore
    bytes32 internal constant ADMIN_SLOT = 0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103;

    /**
     * @dev Returns the current admin.
     *
     * TIP: To get this value clients can read directly from the storage slot shown below (specified by ERC-1967) using
     * the https://eth.wiki/json-rpc/API#eth_getstorageat[`eth_getStorageAt`] RPC call.
     * `0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103`
     */
    function getAdmin() internal view returns (address) {
        return StorageSlot.getAddressSlot(ADMIN_SLOT).value;
    }

    /**
     * @dev Stores a new address in the ERC-1967 admin slot.
     */
    function _setAdmin(address newAdmin) private {
        if (newAdmin == address(0)) {
            revert ERC1967InvalidAdmin(address(0));
        }
        StorageSlot.getAddressSlot(ADMIN_SLOT).value = newAdmin;
    }

    /**
     * @dev Changes the admin of the proxy.
     *
     * Emits an {IERC1967-AdminChanged} event.
     */
    function changeAdmin(address newAdmin) internal {
        emit IERC1967.AdminChanged(getAdmin(), newAdmin);
        _setAdmin(newAdmin);
    }

    /**
     * @dev The storage slot of the UpgradeableBeacon contract which defines the implementation for this proxy.
     * This is the keccak-256 hash of "eip1967.proxy.beacon" subtracted by 1.
     */
    // solhint-disable-next-line private-vars-leading-underscore
    bytes32 internal constant BEACON_SLOT = 0xa3f0ad74e5423aebfd80d3ef4346578335a9a72aeaee59ff6cb3582b35133d50;

    /**
     * @dev Returns the current beacon.
     */
    function getBeacon() internal view returns (address) {
        return StorageSlot.getAddressSlot(BEACON_SLOT).value;
    }

    /**
     * @dev Stores a new beacon in the ERC-1967 beacon slot.
     */
    function _setBeacon(address newBeacon) private {
        if (newBeacon.code.length == 0) {
            revert ERC1967InvalidBeacon(newBeacon);
        }

        StorageSlot.getAddressSlot(BEACON_SLOT).value = newBeacon;

        address beaconImplementation = IBeacon(newBeacon).implementation();
        if (beaconImplementation.code.length == 0) {
            revert ERC1967InvalidImplementation(beaconImplementation);
        }
    }

    /**
     * @dev Change the beacon and trigger a setup call if data is nonempty.
     * This function is payable only if the setup call is performed, otherwise `msg.value` is rejected
     * to avoid stuck value in the contract.
     *
     * Emits an {IERC1967-BeaconUpgraded} event.
     *
     * CAUTION: Invoking this function has no effect on an instance of {BeaconProxy} since v5, since
     * it uses an immutable beacon without looking at the value of the ERC-1967 beacon slot for
     * efficiency.
     */
    function upgradeBeaconToAndCall(address newBeacon, bytes memory data) internal {
        _setBeacon(newBeacon);
        emit IERC1967.BeaconUpgraded(newBeacon);

        if (data.length > 0) {
            Address.functionDelegateCall(IBeacon(newBeacon).implementation(), data);
        } else {
            _checkNonPayable();
        }
    }

    /**
     * @dev Reverts if `msg.value` is not zero. It can be used to avoid `msg.value` stuck in the contract
     * if an upgrade doesn't perform an initialization call.
     */
    function _checkNonPayable() private {
        if (msg.value > 0) {
            revert ERC1967NonPayable();
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)

pragma solidity ^0.8.20;
import {Initializable} from "../proxy/utils/Initializable.sol";

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract ContextUpgradeable is Initializable {
    function __Context_init() internal onlyInitializing {
    }

    function __Context_init_unchained() internal onlyInitializing {
    }
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    function _contextSuffixLength() internal view virtual returns (uint256) {
        return 0;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.4.0) (proxy/beacon/IBeacon.sol)

pragma solidity >=0.4.16;

/**
 * @dev This is the interface that {BeaconProxy} expects of its beacon.
 */
interface IBeacon {
    /**
     * @dev Must return an address that can be used as a delegate call target.
     *
     * {UpgradeableBeacon} will check that this address is a contract.
     */
    function implementation() external view returns (address);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.4.0) (interfaces/IERC1967.sol)

pragma solidity >=0.4.11;

/**
 * @dev ERC-1967: Proxy Storage Slots. This interface contains the events defined in the ERC.
 */
interface IERC1967 {
    /**
     * @dev Emitted when the implementation is upgraded.
     */
    event Upgraded(address indexed implementation);

    /**
     * @dev Emitted when the admin account has changed.
     */
    event AdminChanged(address previousAdmin, address newAdmin);

    /**
     * @dev Emitted when the beacon is changed.
     */
    event BeaconUpgraded(address indexed beacon);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.5.0) (utils/Address.sol)

pragma solidity ^0.8.20;

import {Errors} from "./Errors.sol";
import {LowLevelCall} from "./LowLevelCall.sol";

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev There's no code at `target` (it is not a contract).
     */
    error AddressEmptyCode(address target);

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.20/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        if (address(this).balance < amount) {
            revert Errors.InsufficientBalance(address(this).balance, amount);
        }
        if (LowLevelCall.callNoReturn(recipient, amount, "")) {
            // call successful, nothing to do
            return;
        } else if (LowLevelCall.returnDataSize() > 0) {
            LowLevelCall.bubbleRevert();
        } else {
            revert Errors.FailedCall();
        }
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason or custom error, it is bubbled
     * up by this function (like regular Solidity function calls). However, if
     * the call reverted with no returned reason, this function reverts with a
     * {Errors.FailedCall} error.
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        if (address(this).balance < value) {
            revert Errors.InsufficientBalance(address(this).balance, value);
        }
        bool success = LowLevelCall.callNoReturn(target, value, data);
        if (success && (LowLevelCall.returnDataSize() > 0 || target.code.length > 0)) {
            return LowLevelCall.returnData();
        } else if (success) {
            revert AddressEmptyCode(target);
        } else if (LowLevelCall.returnDataSize() > 0) {
            LowLevelCall.bubbleRevert();
        } else {
            revert Errors.FailedCall();
        }
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        bool success = LowLevelCall.staticcallNoReturn(target, data);
        if (success && (LowLevelCall.returnDataSize() > 0 || target.code.length > 0)) {
            return LowLevelCall.returnData();
        } else if (success) {
            revert AddressEmptyCode(target);
        } else if (LowLevelCall.returnDataSize() > 0) {
            LowLevelCall.bubbleRevert();
        } else {
            revert Errors.FailedCall();
        }
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        bool success = LowLevelCall.delegatecallNoReturn(target, data);
        if (success && (LowLevelCall.returnDataSize() > 0 || target.code.length > 0)) {
            return LowLevelCall.returnData();
        } else if (success) {
            revert AddressEmptyCode(target);
        } else if (LowLevelCall.returnDataSize() > 0) {
            LowLevelCall.bubbleRevert();
        } else {
            revert Errors.FailedCall();
        }
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and reverts if the target
     * was not a contract or bubbling up the revert reason (falling back to {Errors.FailedCall}) in case
     * of an unsuccessful call.
     *
     * NOTE: This function is DEPRECATED and may be removed in the next major release.
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata
    ) internal view returns (bytes memory) {
        // only check if target is a contract if the call was successful and the return data is empty
        // otherwise we already know that it was a contract
        if (success && (returndata.length > 0 || target.code.length > 0)) {
            return returndata;
        } else if (success) {
            revert AddressEmptyCode(target);
        } else if (returndata.length > 0) {
            LowLevelCall.bubbleRevert(returndata);
        } else {
            revert Errors.FailedCall();
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and reverts if it wasn't, either by bubbling the
     * revert reason or with a default {Errors.FailedCall} error.
     */
    function verifyCallResult(bool success, bytes memory returndata) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else if (returndata.length > 0) {
            LowLevelCall.bubbleRevert(returndata);
        } else {
            revert Errors.FailedCall();
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (utils/StorageSlot.sol)
// This file was procedurally generated from scripts/generate/templates/StorageSlot.js.

pragma solidity ^0.8.20;

/**
 * @dev Library for reading and writing primitive types to specific storage slots.
 *
 * Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
 * This library helps with reading and writing to such slots without the need for inline assembly.
 *
 * The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
 *
 * Example usage to set ERC-1967 implementation slot:
 * ```solidity
 * contract ERC1967 {
 *     // Define the slot. Alternatively, use the SlotDerivation library to derive the slot.
 *     bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
 *
 *     function _getImplementation() internal view returns (address) {
 *         return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
 *     }
 *
 *     function _setImplementation(address newImplementation) internal {
 *         require(newImplementation.code.length > 0);
 *         StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
 *     }
 * }
 * ```
 *
 * TIP: Consider using this library along with {SlotDerivation}.
 */
library StorageSlot {
    struct AddressSlot {
        address value;
    }

    struct BooleanSlot {
        bool value;
    }

    struct Bytes32Slot {
        bytes32 value;
    }

    struct Uint256Slot {
        uint256 value;
    }

    struct Int256Slot {
        int256 value;
    }

    struct StringSlot {
        string value;
    }

    struct BytesSlot {
        bytes value;
    }

    /**
     * @dev Returns an `AddressSlot` with member `value` located at `slot`.
     */
    function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
        assembly ("memory-safe") {
            r.slot := slot
        }
    }

    /**
     * @dev Returns a `BooleanSlot` with member `value` located at `slot`.
     */
    function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
        assembly ("memory-safe") {
            r.slot := slot
        }
    }

    /**
     * @dev Returns a `Bytes32Slot` with member `value` located at `slot`.
     */
    function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
        assembly ("memory-safe") {
            r.slot := slot
        }
    }

    /**
     * @dev Returns a `Uint256Slot` with member `value` located at `slot`.
     */
    function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
        assembly ("memory-safe") {
            r.slot := slot
        }
    }

    /**
     * @dev Returns a `Int256Slot` with member `value` located at `slot`.
     */
    function getInt256Slot(bytes32 slot) internal pure returns (Int256Slot storage r) {
        assembly ("memory-safe") {
            r.slot := slot
        }
    }

    /**
     * @dev Returns a `StringSlot` with member `value` located at `slot`.
     */
    function getStringSlot(bytes32 slot) internal pure returns (StringSlot storage r) {
        assembly ("memory-safe") {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `StringSlot` representation of the string storage pointer `store`.
     */
    function getStringSlot(string storage store) internal pure returns (StringSlot storage r) {
        assembly ("memory-safe") {
            r.slot := store.slot
        }
    }

    /**
     * @dev Returns a `BytesSlot` with member `value` located at `slot`.
     */
    function getBytesSlot(bytes32 slot) internal pure returns (BytesSlot storage r) {
        assembly ("memory-safe") {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `BytesSlot` representation of the bytes storage pointer `store`.
     */
    function getBytesSlot(bytes storage store) internal pure returns (BytesSlot storage r) {
        assembly ("memory-safe") {
            r.slot := store.slot
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (utils/Errors.sol)

pragma solidity ^0.8.20;

/**
 * @dev Collection of common custom errors used in multiple contracts
 *
 * IMPORTANT: Backwards compatibility is not guaranteed in future versions of the library.
 * It is recommended to avoid relying on the error API for critical functionality.
 *
 * _Available since v5.1._
 */
library Errors {
    /**
     * @dev The ETH balance of the account is not enough to perform the operation.
     */
    error InsufficientBalance(uint256 balance, uint256 needed);

    /**
     * @dev A call to an address target failed. The target may have reverted.
     */
    error FailedCall();

    /**
     * @dev The deployment failed.
     */
    error FailedDeployment();

    /**
     * @dev A necessary precompile is missing.
     */
    error MissingPrecompile(address);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.5.0) (utils/LowLevelCall.sol)

pragma solidity ^0.8.20;

/**
 * @dev Library of low level call functions that implement different calling strategies to deal with the return data.
 *
 * WARNING: Using this library requires an advanced understanding of Solidity and how the EVM works. It is recommended
 * to use the {Address} library instead.
 */
library LowLevelCall {
    /// @dev Performs a Solidity function call using a low level `call` and ignoring the return data.
    function callNoReturn(address target, bytes memory data) internal returns (bool success) {
        return callNoReturn(target, 0, data);
    }

    /// @dev Same as {callNoReturn}, but allows to specify the value to be sent in the call.
    function callNoReturn(address target, uint256 value, bytes memory data) internal returns (bool success) {
        assembly ("memory-safe") {
            success := call(gas(), target, value, add(data, 0x20), mload(data), 0x00, 0x00)
        }
    }

    /// @dev Performs a Solidity function call using a low level `call` and returns the first 64 bytes of the result
    /// in the scratch space of memory. Useful for functions that return a tuple of single-word values.
    ///
    /// WARNING: Do not assume that the results are zero if `success` is false. Memory can be already allocated
    /// and this function doesn't zero it out.
    function callReturn64Bytes(
        address target,
        bytes memory data
    ) internal returns (bool success, bytes32 result1, bytes32 result2) {
        return callReturn64Bytes(target, 0, data);
    }

    /// @dev Same as {callReturnBytes32Pair}, but allows to specify the value to be sent in the call.
    function callReturn64Bytes(
        address target,
        uint256 value,
        bytes memory data
    ) internal returns (bool success, bytes32 result1, bytes32 result2) {
        assembly ("memory-safe") {
            success := call(gas(), target, value, add(data, 0x20), mload(data), 0x00, 0x40)
            result1 := mload(0x00)
            result2 := mload(0x20)
        }
    }

    /// @dev Performs a Solidity function call using a low level `staticcall` and ignoring the return data.
    function staticcallNoReturn(address target, bytes memory data) internal view returns (bool success) {
        assembly ("memory-safe") {
            success := staticcall(gas(), target, add(data, 0x20), mload(data), 0x00, 0x00)
        }
    }

    /// @dev Performs a Solidity function call using a low level `staticcall` and returns the first 64 bytes of the result
    /// in the scratch space of memory. Useful for functions that return a tuple of single-word values.
    ///
    /// WARNING: Do not assume that the results are zero if `success` is false. Memory can be already allocated
    /// and this function doesn't zero it out.
    function staticcallReturn64Bytes(
        address target,
        bytes memory data
    ) internal view returns (bool success, bytes32 result1, bytes32 result2) {
        assembly ("memory-safe") {
            success := staticcall(gas(), target, add(data, 0x20), mload(data), 0x00, 0x40)
            result1 := mload(0x00)
            result2 := mload(0x20)
        }
    }

    /// @dev Performs a Solidity function call using a low level `delegatecall` and ignoring the return data.
    function delegatecallNoReturn(address target, bytes memory data) internal returns (bool success) {
        assembly ("memory-safe") {
            success := delegatecall(gas(), target, add(data, 0x20), mload(data), 0x00, 0x00)
        }
    }

    /// @dev Performs a Solidity function call using a low level `delegatecall` and returns the first 64 bytes of the result
    /// in the scratch space of memory. Useful for functions that return a tuple of single-word values.
    ///
    /// WARNING: Do not assume that the results are zero if `success` is false. Memory can be already allocated
    /// and this function doesn't zero it out.
    function delegatecallReturn64Bytes(
        address target,
        bytes memory data
    ) internal returns (bool success, bytes32 result1, bytes32 result2) {
        assembly ("memory-safe") {
            success := delegatecall(gas(), target, add(data, 0x20), mload(data), 0x00, 0x40)
            result1 := mload(0x00)
            result2 := mload(0x20)
        }
    }

    /// @dev Returns the size of the return data buffer.
    function returnDataSize() internal pure returns (uint256 size) {
        assembly ("memory-safe") {
            size := returndatasize()
        }
    }

    /// @dev Returns a buffer containing the return data from the last call.
    function returnData() internal pure returns (bytes memory result) {
        assembly ("memory-safe") {
            result := mload(0x40)
            mstore(result, returndatasize())
            returndatacopy(add(result, 0x20), 0x00, returndatasize())
            mstore(0x40, add(result, add(0x20, returndatasize())))
        }
    }

    /// @dev Revert with the return data from the last call.
    function bubbleRevert() internal pure {
        assembly ("memory-safe") {
            let fmp := mload(0x40)
            returndatacopy(fmp, 0x00, returndatasize())
            revert(fmp, returndatasize())
        }
    }

    function bubbleRevert(bytes memory returndata) internal pure {
        assembly ("memory-safe") {
            revert(add(returndata, 0x20), mload(returndata))
        }
    }
}

{
  "remappings": [
    "src/polygon/:@openzeppelin/contracts-upgradeable/=lib/openzeppelin-contracts-upgradeable-v4/contracts/",
    "src/polygon/:@openzeppelin/contracts/=lib/openzeppelin-contracts-v4/contracts/",
    "script/polygon/:@openzeppelin/contracts-upgradeable/=lib/openzeppelin-contracts-upgradeable-v4/contracts/",
    "script/polygon/:@openzeppelin/contracts/=lib/openzeppelin-contracts-v4/contracts/",
    "lib/account-abstraction/:@openzeppelin/contracts/=lib/openzeppelin-contracts-v4/contracts/",
    "account-abstraction/=lib/account-abstraction/",
    "lib/protocol-monorepo/packages/ethereum-contracts/:@openzeppelin/contracts/=lib/openzeppelin-contracts-v4/contracts/",
    "@openzeppelin/contracts/=lib/openzeppelin-contracts/contracts/",
    "@openzeppelin/contracts-upgradeable/=lib/openzeppelin-contracts-upgradeable/contracts/",
    "forge-std/=lib/forge-std/src/",
    "@superfluid-finance/ethereum-contracts/contracts/=lib/protocol-monorepo/packages/ethereum-contracts/contracts/",
    "@chainlink/contracts/=lib/chainlink-ccip/chains/evm/contracts/",
    "@openzeppelin/contracts@5.0.2/=lib/openzeppelin-contracts/contracts/",
    "chainlink-ccip/=lib/chainlink-ccip/chains/evm/contracts/vendor/optimism/interop-lib/v0/src/",
    "ds-test/=lib/openzeppelin-contracts-v4/lib/forge-std/lib/ds-test/src/",
    "erc4626-tests/=lib/openzeppelin-contracts-upgradeable/lib/erc4626-tests/",
    "halmos-cheatcodes/=lib/openzeppelin-contracts-upgradeable/lib/halmos-cheatcodes/src/",
    "openzeppelin-contracts-upgradeable-v4/=lib/openzeppelin-contracts-upgradeable-v4/",
    "openzeppelin-contracts-upgradeable/=lib/openzeppelin-contracts-upgradeable/",
    "openzeppelin-contracts-v4/=lib/openzeppelin-contracts-v4/",
    "openzeppelin-contracts/=lib/openzeppelin-contracts/",
    "openzeppelin/=lib/openzeppelin-contracts-v4/contracts/",
    "protocol-monorepo/=lib/protocol-monorepo/packages/solidity-semantic-money/src/"
  ],
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "metadata": {
    "useLiteralContent": false,
    "bytecodeHash": "ipfs",
    "appendCBOR": true
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "evmVersion": "prague",
  "viaIR": false
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[{"internalType":"address","name":"target","type":"address"}],"name":"AddressEmptyCode","type":"error"},{"inputs":[{"internalType":"address","name":"implementation","type":"address"}],"name":"ERC1967InvalidImplementation","type":"error"},{"inputs":[],"name":"ERC1967NonPayable","type":"error"},{"inputs":[],"name":"FailedCall","type":"error"},{"inputs":[],"name":"InvalidInitialization","type":"error"},{"inputs":[],"name":"NotInitializing","type":"error"},{"inputs":[{"internalType":"address","name":"owner","type":"address"}],"name":"OwnableInvalidOwner","type":"error"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"OwnableUnauthorizedAccount","type":"error"},{"inputs":[],"name":"UUPSUnauthorizedCallContext","type":"error"},{"inputs":[{"internalType":"bytes32","name":"slot","type":"bytes32"}],"name":"UUPSUnsupportedProxiableUUID","type":"error"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"},{"indexed":true,"internalType":"address","name":"to","type":"address"}],"name":"ETHRecovered","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"token","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"},{"indexed":true,"internalType":"address","name":"to","type":"address"}],"name":"FundsRecovered","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint64","name":"version","type":"uint64"}],"name":"Initialized","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"newNonce","type":"uint256"}],"name":"NonceSet","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"implementation","type":"address"}],"name":"Upgraded","type":"event"},{"inputs":[],"name":"UPGRADE_INTERFACE_VERSION","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getContractInfo","outputs":[{"internalType":"address","name":"contractAddress","type":"address"},{"internalType":"address","name":"ownerAddress","type":"address"},{"internalType":"uint256","name":"ethBalance","type":"uint256"},{"internalType":"uint256","name":"nonce","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getNonce","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"token","type":"address"}],"name":"getTokenBalance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_owner","type":"address"}],"name":"initialize","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"proxiableUUID","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"token","type":"address"},{"internalType":"address","name":"to","type":"address"}],"name":"recoverAllTokens","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address payable","name":"to","type":"address"}],"name":"recoverETH","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"token","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"recoverToken","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_nonce","type":"uint256"}],"name":"setNonce","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newImplementation","type":"address"},{"internalType":"bytes","name":"data","type":"bytes"}],"name":"upgradeToAndCall","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[],"name":"version","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"pure","type":"function"},{"stateMutability":"payable","type":"receive"}]

60a060405230608052348015610013575f5ffd5b5061001c610021565b6100d3565b7ff0c57e16840df040f15088dc2f81fe391c3923bec73e23a9662efc9c229c6a00805468010000000000000000900460ff16156100715760405163f92ee8a960e01b815260040160405180910390fd5b80546001600160401b03908116146100d05780546001600160401b0319166001600160401b0390811782556040519081527fc7f505b2f371ae2175ee4913f4499e1f2633a7b5936321eed1cdaeb6115181d29060200160405180910390a15b50565b6080516110f66100f95f395f8181610a3601528181610a5f0152610b9e01526110f65ff3fe6080604052600436106100e7575f3560e01c80638184be4011610087578063c4d66de811610057578063c4d66de81461028f578063d087d288146102ae578063f2fde38b146102c1578063f360c183146102e0575f5ffd5b80638184be40146101f55780638da5cb5b14610214578063a7229fd914610240578063ad3cb1cc1461025f575f5ffd5b806352d1902d116100c257806352d1902d1461015857806354fd4d501461016c578063715018a6146101a25780637cc1f867146101b6575f5ffd5b8063134dfcd8146100f25780633aecd0e3146101135780634f1ef28614610145575f5ffd5b366100ee57005b5f5ffd5b3480156100fd575f5ffd5b5061011161010c366004610e97565b6102ff565b005b34801561011e575f5ffd5b5061013261012d366004610e97565b610475565b6040519081526020015b60405180910390f35b610111610153366004610ecd565b610543565b348015610163575f5ffd5b50610132610562565b348015610177575f5ffd5b506040805180820190915260058152640312e302e360dc1b60208201525b60405161013c9190610f93565b3480156101ad575f5ffd5b5061011161057d565b3480156101c1575f5ffd5b506101ca610590565b604080516001600160a01b03958616815294909316602085015291830152606082015260800161013c565b348015610200575f5ffd5b5061011161020f366004610fc8565b6105ae565b34801561021f575f5ffd5b50610228610618565b6040516001600160a01b03909116815260200161013c565b34801561024b575f5ffd5b5061011161025a366004610fff565b610646565b34801561026a575f5ffd5b50610195604051806040016040528060058152602001640352e302e360dc1b81525081565b34801561029a575f5ffd5b506101116102a9366004610e97565b610833565b3480156102b9575f5ffd5b505f54610132565b3480156102cc575f5ffd5b506101116102db366004610e97565b61097a565b3480156102eb575f5ffd5b506101116102fa36600461103d565b6109b7565b6103076109f9565b6001600160a01b0381166103565760405162461bcd60e51b8152602060048201526011602482015270125b9d985b1a59081c9958da5c1a595b9d607a1b60448201526064015b60405180910390fd5b47806103985760405162461bcd60e51b815260206004820152601160248201527027379022aa24103a37903932b1b7bb32b960791b604482015260640161034d565b5f826001600160a01b0316826040515f6040518083038185875af1925050503d805f81146103e1576040519150601f19603f3d011682016040523d82523d5f602084013e6103e6565b606091505b505090508061042d5760405162461bcd60e51b8152602060048201526013602482015272115512081d1c985b9cd9995c8819985a5b1959606a1b604482015260640161034d565b826001600160a01b03167f25213c8d5048cca89c796aa5e8a729fc974306a669938d884d396f5c4318c5368360405161046891815260200190565b60405180910390a2505050565b604080513060248083019190915282518083039091018152604490910182526020810180516001600160e01b03166370a0823160e01b17905290515f91829182916001600160a01b038616916104cb9190611054565b5f60405180830381855afa9150503d805f8114610503576040519150601f19603f3d011682016040523d82523d5f602084013e610508565b606091505b509150915081158061051957508051155b1561052757505f9392505050565b8080602001905181019061053b919061106a565b949350505050565b61054b610a2b565b61055482610acf565b61055e8282610ad7565b5050565b5f61056b610b93565b505f5160206110a15f395f51905f5290565b6105856109f9565b61058e5f610bdc565b565b5f5f5f5f3061059d610618565b475f54935093509350935090919293565b6105b66109f9565b5f6105c083610475565b90505f81116106085760405162461bcd60e51b81526020600482015260146024820152732737903a37b5b2b739903a37903932b1b7bb32b960611b604482015260640161034d565b610613838383610646565b505050565b7f9016d09d72d40fdae2fd8ceac6b6234c7706214fd39c1cd1e609a0528c199300546001600160a01b031690565b61064e6109f9565b6001600160a01b0382166106985760405162461bcd60e51b8152602060048201526011602482015270125b9d985b1a59081c9958da5c1a595b9d607a1b604482015260640161034d565b6001600160a01b0383166106de5760405162461bcd60e51b815260206004820152600d60248201526c24b73b30b634b2103a37b5b2b760991b604482015260640161034d565b604080516001600160a01b038481166024830152604480830185905283518084039091018152606490920183526020820180516001600160e01b031663a9059cbb60e01b17905291515f928392908716916107399190611054565b5f604051808303815f865af19150503d805f8114610772576040519150601f19603f3d011682016040523d82523d5f602084013e610777565b606091505b50915091508180156107a15750805115806107a15750808060200190518101906107a19190611081565b6107df5760405162461bcd60e51b815260206004820152600f60248201526e151c985b9cd9995c8819985a5b1959608a1b604482015260640161034d565b836001600160a01b0316856001600160a01b03167fdd41482ef6c9c36b18740b9be7cafc1cc79e149e9639aae568478f28ac5390b48560405161082491815260200190565b60405180910390a35050505050565b5f61083c610c4c565b805490915060ff600160401b820416159067ffffffffffffffff165f811580156108635750825b90505f8267ffffffffffffffff16600114801561087f5750303b155b90508115801561088d575080155b156108ab5760405163f92ee8a960e01b815260040160405180910390fd5b845467ffffffffffffffff1916600117855583156108d557845460ff60401b1916600160401b1785555b6001600160a01b03861661091b5760405162461bcd60e51b815260206004820152600d60248201526c24b73b30b634b21037bbb732b960991b604482015260640161034d565b61092486610c76565b61092c610c87565b831561097257845460ff60401b19168555604051600181527fc7f505b2f371ae2175ee4913f4499e1f2633a7b5936321eed1cdaeb6115181d29060200160405180910390a15b505050505050565b6109826109f9565b6001600160a01b0381166109ab57604051631e4fbdf760e01b81525f600482015260240161034d565b6109b481610bdc565b50565b6109bf6109f9565b5f8190556040518181527f932769c161766a418f4a836d8368923ad778a1f0aa9d20de3cfca66ae6ccf13e9060200160405180910390a150565b33610a02610618565b6001600160a01b03161461058e5760405163118cdaa760e01b815233600482015260240161034d565b306001600160a01b037f0000000000000000000000000000000000000000000000000000000000000000161480610ab157507f00000000000000000000000000000000000000000000000000000000000000006001600160a01b0316610aa55f5160206110a15f395f51905f52546001600160a01b031690565b6001600160a01b031614155b1561058e5760405163703e46dd60e11b815260040160405180910390fd5b6109b46109f9565b816001600160a01b03166352d1902d6040518163ffffffff1660e01b8152600401602060405180830381865afa925050508015610b31575060408051601f3d908101601f19168201909252610b2e9181019061106a565b60015b610b5957604051634c9c8ce360e01b81526001600160a01b038316600482015260240161034d565b5f5160206110a15f395f51905f528114610b8957604051632a87526960e21b81526004810182905260240161034d565b6106138383610c8f565b306001600160a01b037f0000000000000000000000000000000000000000000000000000000000000000161461058e5760405163703e46dd60e11b815260040160405180910390fd5b7f9016d09d72d40fdae2fd8ceac6b6234c7706214fd39c1cd1e609a0528c19930080546001600160a01b031981166001600160a01b03848116918217845560405192169182907f8be0079c531659141344cd1fd0a4f28419497f9722a3daafe3b4186f6b6457e0905f90a3505050565b5f807ff0c57e16840df040f15088dc2f81fe391c3923bec73e23a9662efc9c229c6a005b92915050565b610c7e610ce4565b6109b481610d09565b61058e610ce4565b610c9882610d11565b6040516001600160a01b038316907fbc7cd75a20ee27fd9adebab32041f755214dbc6bffa90cc0225b39da2e5c2d3b905f90a2805115610cdc576106138282610d74565b61055e610e14565b610cec610e33565b61058e57604051631afcd79f60e31b815260040160405180910390fd5b610982610ce4565b806001600160a01b03163b5f03610d4657604051634c9c8ce360e01b81526001600160a01b038216600482015260240161034d565b5f5160206110a15f395f51905f5280546001600160a01b0319166001600160a01b0392909216919091179055565b60605f610d818484610e4c565b9050808015610da257505f3d1180610da257505f846001600160a01b03163b115b15610db757610daf610e5f565b915050610c70565b8015610de157604051639996b31560e01b81526001600160a01b038516600482015260240161034d565b3d15610df457610def610e78565b610e0d565b60405163d6bda27560e01b815260040160405180910390fd5b5092915050565b341561058e5760405163b398979f60e01b815260040160405180910390fd5b5f610e3c610c4c565b54600160401b900460ff16919050565b5f5f5f835160208501865af49392505050565b6040513d81523d5f602083013e3d602001810160405290565b6040513d5f823e3d81fd5b6001600160a01b03811681146109b4575f5ffd5b5f60208284031215610ea7575f5ffd5b8135610eb281610e83565b9392505050565b634e487b7160e01b5f52604160045260245ffd5b5f5f60408385031215610ede575f5ffd5b8235610ee981610e83565b9150602083013567ffffffffffffffff811115610f04575f5ffd5b8301601f81018513610f14575f5ffd5b803567ffffffffffffffff811115610f2e57610f2e610eb9565b604051601f8201601f19908116603f0116810167ffffffffffffffff81118282101715610f5d57610f5d610eb9565b604052818152828201602001871015610f74575f5ffd5b816020840160208301375f602083830101528093505050509250929050565b602081525f82518060208401528060208501604085015e5f604082850101526040601f19601f83011684010191505092915050565b5f5f60408385031215610fd9575f5ffd5b8235610fe481610e83565b91506020830135610ff481610e83565b809150509250929050565b5f5f5f60608486031215611011575f5ffd5b833561101c81610e83565b9250602084013561102c81610e83565b929592945050506040919091013590565b5f6020828403121561104d575f5ffd5b5035919050565b5f82518060208501845e5f920191825250919050565b5f6020828403121561107a575f5ffd5b5051919050565b5f60208284031215611091575f5ffd5b81518015158114610eb2575f5ffdfe360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbca26469706673582212201117b48f92ce05cd8251548d8e0e2e7dabb0c0a8cbe0bf3733657522ac8ec4e564736f6c634300081e0033

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