Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Is this a proxy?
• Similar
• Sol2Uml
• Submit Audit
• Compare

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {IACLManager, IPoolConfigurator, IPoolDataProvider} from 'aave-address-book/AaveV3.sol';
import {Address} from 'solidity-utils/contracts/oz-common/Address.sol';
import {EngineFlags} from 'aave-v3-origin/periphery/contracts/v3-config-engine/EngineFlags.sol';
import {IAaveV3ConfigEngine} from 'aave-v3-origin/periphery/contracts/v3-config-engine/IAaveV3ConfigEngine.sol';
import {ICapsPlusRiskSteward} from './ICapsPlusRiskSteward.sol';

/**
 * @title CapsPlusRiskStewardErrors
 * @author BGD labs
 * @notice Library with all the potential errors to be thrown by the steward
 */
library CapsPlusRiskStewardErrors {
  /**
   * @notice Only the permissioned council is allowed to call methods on the steward.
   */
  string public constant INVALID_CALLER = 'INVALID_CALLER';
  /**
   * @notice The steward only allows cap increases.
   */
  string public constant NOT_STRICTLY_HIGHER = 'NOT_STRICTLY_HIGHER';
  /**
   * @notice A single cap can only be increased once every 5 days
   */
  string public constant DEBOUNCE_NOT_RESPECTED = 'DEBOUNCE_NOT_RESPECTED';
  /**
   * @notice A single cap increase must not increase the cap by more than 100%
   */
  string public constant UPDATE_ABOVE_MAX = 'UPDATE_ABOVE_MAX';
  /**
   * @notice There must be at least one cap update per execution
   */
  string public constant NO_ZERO_UPDATES = 'NO_ZERO_UPDATES';
  /**
   * @notice The steward does allow updates of caps, but not the initialization of non existing caps.
   */
  string public constant NO_CAP_INITIALIZE = 'NO_CAP_INITIALIZE';
}

/**
 * @title CapsPlusRiskSteward
 * @author BGD labs
 * @notice Contract managing caps increasing on an aave v3 pool
 */
contract CapsPlusRiskSteward is ICapsPlusRiskSteward {
  using Address for address;

  /// @inheritdoc ICapsPlusRiskSteward
  uint256 public immutable MINIMUM_DELAY;

  /// @inheritdoc ICapsPlusRiskSteward
  IAaveV3ConfigEngine public immutable CONFIG_ENGINE;

  /// @inheritdoc ICapsPlusRiskSteward
  IPoolDataProvider public immutable POOL_DATA_PROVIDER;

  /// @inheritdoc ICapsPlusRiskSteward
  address public immutable RISK_COUNCIL;

  mapping(address => Debounce) internal _timelocks;

  /**
   * @dev Modifier preventing anyone, but the council to update caps.
   */
  modifier onlyRiskCouncil() {
    require(RISK_COUNCIL == msg.sender, CapsPlusRiskStewardErrors.INVALID_CALLER);
    _;
  }

  /**
   * @param poolDataProvider The pool data provider of the pool to be controlled by the steward
   * @param engine the config engine to be used by the steward
   * @param riskCouncil the safe address of the council being able to interact with the steward
   * @param minimumDelay the minimum delay between two cap updates
   */
  constructor(
    IPoolDataProvider poolDataProvider,
    IAaveV3ConfigEngine engine,
    address riskCouncil,
    uint256 minimumDelay
  ) {
    POOL_DATA_PROVIDER = poolDataProvider;
    RISK_COUNCIL = riskCouncil;
    CONFIG_ENGINE = engine;
    MINIMUM_DELAY = minimumDelay;
  }

  /// @inheritdoc ICapsPlusRiskSteward
  function updateCaps(
    IAaveV3ConfigEngine.CapsUpdate[] calldata capUpdates
  ) external onlyRiskCouncil {
    require(capUpdates.length > 0, CapsPlusRiskStewardErrors.NO_ZERO_UPDATES);
    for (uint256 i = 0; i < capUpdates.length; i++) {
      (uint256 currentBorrowCap, uint256 currentSupplyCap) = POOL_DATA_PROVIDER.getReserveCaps(
        capUpdates[i].asset
      );
      Debounce storage debounce = _timelocks[capUpdates[i].asset];
      if (capUpdates[i].supplyCap != EngineFlags.KEEP_CURRENT) {
        _validateCapIncrease(
          currentSupplyCap,
          capUpdates[i].supplyCap,
          debounce.supplyCapLastUpdated
        );
        debounce.supplyCapLastUpdated = uint40(block.timestamp);
      }
      if (capUpdates[i].borrowCap != EngineFlags.KEEP_CURRENT) {
        _validateCapIncrease(
          currentBorrowCap,
          capUpdates[i].borrowCap,
          debounce.borrowCapLastUpdated
        );
        debounce.borrowCapLastUpdated = uint40(block.timestamp);
      }
    }
    address(CONFIG_ENGINE).functionDelegateCall(
      abi.encodeWithSelector(CONFIG_ENGINE.updateCaps.selector, capUpdates)
    );
  }

  /// @inheritdoc ICapsPlusRiskSteward
  function getTimelock(address asset) external view returns (Debounce memory) {
    return _timelocks[asset];
  }

  /**
   * @notice A cap increase is valid, when it:
   * - respects the debounce duration (5 day pause between updates must be respected)
   * - the asset already had a cap (the steward can increase caps, but not initialize them)
   * - the increase increases by a maximum of 100% of the current cap
   * @param currentCap the current cap
   * @param newCap the new cap
   * @param lastUpdated the timestamp of the last update
   */
  function _validateCapIncrease(
    uint256 currentCap,
    uint256 newCap,
    uint40 lastUpdated
  ) internal view {
    require(currentCap != 0, CapsPlusRiskStewardErrors.NO_CAP_INITIALIZE);
    require(newCap > currentCap, CapsPlusRiskStewardErrors.NOT_STRICTLY_HIGHER);
    require(
      block.timestamp - lastUpdated > MINIMUM_DELAY,
      CapsPlusRiskStewardErrors.DEBOUNCE_NOT_RESPECTED
    );
    require(
      _capsIncreaseWithinAllowedRange(currentCap, newCap),
      CapsPlusRiskStewardErrors.UPDATE_ABOVE_MAX
    );
  }

  /**
   * @notice Ensures the cap increase is within the allowed range.
   * @param from current cap
   * @param to new cap
   * @return bool true, if difference is within the max 100% increase window
   */
  function _capsIncreaseWithinAllowedRange(uint256 from, uint256 to) internal pure returns (bool) {
    return to - from <= from;
  }
}

// SPDX-License-Identifier: MIT
// Chainlink Contracts v0.8
pragma solidity ^0.8.0;

interface AggregatorInterface {
  function latestAnswer() external view returns (int256);

  function latestTimestamp() external view returns (uint256);

  function latestRound() external view returns (uint256);

  function getAnswer(uint256 roundId) external view returns (int256);

  function getTimestamp(uint256 roundId) external view returns (uint256);

  event AnswerUpdated(int256 indexed current, uint256 indexed roundId, uint256 updatedAt);

  event NewRound(uint256 indexed roundId, address indexed startedBy, uint256 startedAt);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
  /**
   * @dev Returns the amount of tokens in existence.
   */
  function totalSupply() external view returns (uint256);

  /**
   * @dev Returns the amount of tokens owned by `account`.
   */
  function balanceOf(address account) external view returns (uint256);

  /**
   * @dev Moves `amount` tokens from the caller's account to `recipient`.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * Emits a {Transfer} event.
   */
  function transfer(address recipient, uint256 amount) external returns (bool);

  /**
   * @dev Returns the remaining number of tokens that `spender` will be
   * allowed to spend on behalf of `owner` through {transferFrom}. This is
   * zero by default.
   *
   * This value changes when {approve} or {transferFrom} are called.
   */
  function allowance(address owner, address spender) external view returns (uint256);

  /**
   * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * IMPORTANT: Beware that changing an allowance with this method brings the risk
   * that someone may use both the old and the new allowance by unfortunate
   * transaction ordering. One possible solution to mitigate this race
   * condition is to first reduce the spender's allowance to 0 and set the
   * desired value afterwards:
   * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
   *
   * Emits an {Approval} event.
   */
  function approve(address spender, uint256 amount) external returns (bool);

  /**
   * @dev Moves `amount` tokens from `sender` to `recipient` using the
   * allowance mechanism. `amount` is then deducted from the caller's
   * allowance.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * Emits a {Transfer} event.
   */
  function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

  /**
   * @dev Emitted when `value` tokens are moved from one account (`from`) to
   * another (`to`).
   *
   * Note that `value` may be zero.
   */
  event Transfer(address indexed from, address indexed to, uint256 value);

  /**
   * @dev Emitted when the allowance of a `spender` for an `owner` is set by
   * a call to {approve}. `value` is the new allowance.
   */
  event Approval(address indexed owner, address indexed spender, uint256 value);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {IPoolAddressesProvider} from './IPoolAddressesProvider.sol';

/**
 * @title IACLManager
 * @author Aave
 * @notice Defines the basic interface for the ACL Manager
 */
interface IACLManager {
  /**
   * @notice Returns the contract address of the PoolAddressesProvider
   * @return The address of the PoolAddressesProvider
   */
  function ADDRESSES_PROVIDER() external view returns (IPoolAddressesProvider);

  /**
   * @notice Returns the identifier of the PoolAdmin role
   * @return The id of the PoolAdmin role
   */
  function POOL_ADMIN_ROLE() external view returns (bytes32);

  /**
   * @notice Returns the identifier of the EmergencyAdmin role
   * @return The id of the EmergencyAdmin role
   */
  function EMERGENCY_ADMIN_ROLE() external view returns (bytes32);

  /**
   * @notice Returns the identifier of the RiskAdmin role
   * @return The id of the RiskAdmin role
   */
  function RISK_ADMIN_ROLE() external view returns (bytes32);

  /**
   * @notice Returns the identifier of the FlashBorrower role
   * @return The id of the FlashBorrower role
   */
  function FLASH_BORROWER_ROLE() external view returns (bytes32);

  /**
   * @notice Returns the identifier of the Bridge role
   * @return The id of the Bridge role
   */
  function BRIDGE_ROLE() external view returns (bytes32);

  /**
   * @notice Returns the identifier of the AssetListingAdmin role
   * @return The id of the AssetListingAdmin role
   */
  function ASSET_LISTING_ADMIN_ROLE() external view returns (bytes32);

  /**
   * @notice Set the role as admin of a specific role.
   * @dev By default the admin role for all roles is `DEFAULT_ADMIN_ROLE`.
   * @param role The role to be managed by the admin role
   * @param adminRole The admin role
   */
  function setRoleAdmin(bytes32 role, bytes32 adminRole) external;

  /**
   * @notice Adds a new admin as PoolAdmin
   * @param admin The address of the new admin
   */
  function addPoolAdmin(address admin) external;

  /**
   * @notice Removes an admin as PoolAdmin
   * @param admin The address of the admin to remove
   */
  function removePoolAdmin(address admin) external;

  /**
   * @notice Returns true if the address is PoolAdmin, false otherwise
   * @param admin The address to check
   * @return True if the given address is PoolAdmin, false otherwise
   */
  function isPoolAdmin(address admin) external view returns (bool);

  /**
   * @notice Adds a new admin as EmergencyAdmin
   * @param admin The address of the new admin
   */
  function addEmergencyAdmin(address admin) external;

  /**
   * @notice Removes an admin as EmergencyAdmin
   * @param admin The address of the admin to remove
   */
  function removeEmergencyAdmin(address admin) external;

  /**
   * @notice Returns true if the address is EmergencyAdmin, false otherwise
   * @param admin The address to check
   * @return True if the given address is EmergencyAdmin, false otherwise
   */
  function isEmergencyAdmin(address admin) external view returns (bool);

  /**
   * @notice Adds a new admin as RiskAdmin
   * @param admin The address of the new admin
   */
  function addRiskAdmin(address admin) external;

  /**
   * @notice Removes an admin as RiskAdmin
   * @param admin The address of the admin to remove
   */
  function removeRiskAdmin(address admin) external;

  /**
   * @notice Returns true if the address is RiskAdmin, false otherwise
   * @param admin The address to check
   * @return True if the given address is RiskAdmin, false otherwise
   */
  function isRiskAdmin(address admin) external view returns (bool);

  /**
   * @notice Adds a new address as FlashBorrower
   * @param borrower The address of the new FlashBorrower
   */
  function addFlashBorrower(address borrower) external;

  /**
   * @notice Removes an address as FlashBorrower
   * @param borrower The address of the FlashBorrower to remove
   */
  function removeFlashBorrower(address borrower) external;

  /**
   * @notice Returns true if the address is FlashBorrower, false otherwise
   * @param borrower The address to check
   * @return True if the given address is FlashBorrower, false otherwise
   */
  function isFlashBorrower(address borrower) external view returns (bool);

  /**
   * @notice Adds a new address as Bridge
   * @param bridge The address of the new Bridge
   */
  function addBridge(address bridge) external;

  /**
   * @notice Removes an address as Bridge
   * @param bridge The address of the bridge to remove
   */
  function removeBridge(address bridge) external;

  /**
   * @notice Returns true if the address is Bridge, false otherwise
   * @param bridge The address to check
   * @return True if the given address is Bridge, false otherwise
   */
  function isBridge(address bridge) external view returns (bool);

  /**
   * @notice Adds a new admin as AssetListingAdmin
   * @param admin The address of the new admin
   */
  function addAssetListingAdmin(address admin) external;

  /**
   * @notice Removes an admin as AssetListingAdmin
   * @param admin The address of the admin to remove
   */
  function removeAssetListingAdmin(address admin) external;

  /**
   * @notice Returns true if the address is AssetListingAdmin, false otherwise
   * @param admin The address to check
   * @return True if the given address is AssetListingAdmin, false otherwise
   */
  function isAssetListingAdmin(address admin) external view returns (bool);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {IERC20} from '../dependencies/openzeppelin/contracts/IERC20.sol';
import {IScaledBalanceToken} from './IScaledBalanceToken.sol';
import {IInitializableAToken} from './IInitializableAToken.sol';

/**
 * @title IAToken
 * @author Aave
 * @notice Defines the basic interface for an AToken.
 */
interface IAToken is IERC20, IScaledBalanceToken, IInitializableAToken {
  /**
   * @dev Emitted during the transfer action
   * @param from The user whose tokens are being transferred
   * @param to The recipient
   * @param value The scaled amount being transferred
   * @param index The next liquidity index of the reserve
   */
  event BalanceTransfer(address indexed from, address indexed to, uint256 value, uint256 index);

  /**
   * @notice Mints `amount` aTokens to `user`
   * @param caller The address performing the mint
   * @param onBehalfOf The address of the user that will receive the minted aTokens
   * @param amount The amount of tokens getting minted
   * @param index The next liquidity index of the reserve
   * @return `true` if the the previous balance of the user was 0
   */
  function mint(
    address caller,
    address onBehalfOf,
    uint256 amount,
    uint256 index
  ) external returns (bool);

  /**
   * @notice Burns aTokens from `user` and sends the equivalent amount of underlying to `receiverOfUnderlying`
   * @dev In some instances, the mint event could be emitted from a burn transaction
   * if the amount to burn is less than the interest that the user accrued
   * @param from The address from which the aTokens will be burned
   * @param receiverOfUnderlying The address that will receive the underlying
   * @param amount The amount being burned
   * @param index The next liquidity index of the reserve
   */
  function burn(address from, address receiverOfUnderlying, uint256 amount, uint256 index) external;

  /**
   * @notice Mints aTokens to the reserve treasury
   * @param amount The amount of tokens getting minted
   * @param index The next liquidity index of the reserve
   */
  function mintToTreasury(uint256 amount, uint256 index) external;

  /**
   * @notice Transfers aTokens in the event of a borrow being liquidated, in case the liquidators reclaims the aToken
   * @param from The address getting liquidated, current owner of the aTokens
   * @param to The recipient
   * @param value The amount of tokens getting transferred
   */
  function transferOnLiquidation(address from, address to, uint256 value) external;

  /**
   * @notice Transfers the underlying asset to `target`.
   * @dev Used by the Pool to transfer assets in borrow(), withdraw() and flashLoan()
   * @param target The recipient of the underlying
   * @param amount The amount getting transferred
   */
  function transferUnderlyingTo(address target, uint256 amount) external;

  /**
   * @notice Handles the underlying received by the aToken after the transfer has been completed.
   * @dev The default implementation is empty as with standard ERC20 tokens, nothing needs to be done after the
   * transfer is concluded. However in the future there may be aTokens that allow for example to stake the underlying
   * to receive LM rewards. In that case, `handleRepayment()` would perform the staking of the underlying asset.
   * @param user The user executing the repayment
   * @param onBehalfOf The address of the user who will get his debt reduced/removed
   * @param amount The amount getting repaid
   */
  function handleRepayment(address user, address onBehalfOf, uint256 amount) external;

  /**
   * @notice Allow passing a signed message to approve spending
   * @dev implements the permit function as for
   * https://github.com/ethereum/EIPs/blob/8a34d644aacf0f9f8f00815307fd7dd5da07655f/EIPS/eip-2612.md
   * @param owner The owner of the funds
   * @param spender The spender
   * @param value The amount
   * @param deadline The deadline timestamp, type(uint256).max for max deadline
   * @param v Signature param
   * @param s Signature param
   * @param r Signature param
   */
  function permit(
    address owner,
    address spender,
    uint256 value,
    uint256 deadline,
    uint8 v,
    bytes32 r,
    bytes32 s
  ) external;

  /**
   * @notice Returns the address of the underlying asset of this aToken (E.g. WETH for aWETH)
   * @return The address of the underlying asset
   */
  function UNDERLYING_ASSET_ADDRESS() external view returns (address);

  /**
   * @notice Returns the address of the Aave treasury, receiving the fees on this aToken.
   * @return Address of the Aave treasury
   */
  function RESERVE_TREASURY_ADDRESS() external view returns (address);

  /**
   * @notice Get the domain separator for the token
   * @dev Return cached value if chainId matches cache, otherwise recomputes separator
   * @return The domain separator of the token at current chain
   */
  function DOMAIN_SEPARATOR() external view returns (bytes32);

  /**
   * @notice Returns the nonce for owner.
   * @param owner The address of the owner
   * @return The nonce of the owner
   */
  function nonces(address owner) external view returns (uint256);

  /**
   * @notice Rescue and transfer tokens locked in this contract
   * @param token The address of the token
   * @param to The address of the recipient
   * @param amount The amount of token to transfer
   */
  function rescueTokens(address token, address to, uint256 amount) external;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

/**
 * @title IAaveIncentivesController
 * @author Aave
 * @notice Defines the basic interface for an Aave Incentives Controller.
 * @dev It only contains one single function, needed as a hook on aToken and debtToken transfers.
 */
interface IAaveIncentivesController {
  /**
   * @dev Called by the corresponding asset on transfer hook in order to update the rewards distribution.
   * @dev The units of `totalSupply` and `userBalance` should be the same.
   * @param user The address of the user whose asset balance has changed
   * @param totalSupply The total supply of the asset prior to user balance change
   * @param userBalance The previous user balance prior to balance change
   */
  function handleAction(address user, uint256 totalSupply, uint256 userBalance) external;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {IPriceOracleGetter} from './IPriceOracleGetter.sol';
import {IPoolAddressesProvider} from './IPoolAddressesProvider.sol';

/**
 * @title IAaveOracle
 * @author Aave
 * @notice Defines the basic interface for the Aave Oracle
 */
interface IAaveOracle is IPriceOracleGetter {
  /**
   * @dev Emitted after the base currency is set
   * @param baseCurrency The base currency of used for price quotes
   * @param baseCurrencyUnit The unit of the base currency
   */
  event BaseCurrencySet(address indexed baseCurrency, uint256 baseCurrencyUnit);

  /**
   * @dev Emitted after the price source of an asset is updated
   * @param asset The address of the asset
   * @param source The price source of the asset
   */
  event AssetSourceUpdated(address indexed asset, address indexed source);

  /**
   * @dev Emitted after the address of fallback oracle is updated
   * @param fallbackOracle The address of the fallback oracle
   */
  event FallbackOracleUpdated(address indexed fallbackOracle);

  /**
   * @notice Returns the PoolAddressesProvider
   * @return The address of the PoolAddressesProvider contract
   */
  function ADDRESSES_PROVIDER() external view returns (IPoolAddressesProvider);

  /**
   * @notice Sets or replaces price sources of assets
   * @param assets The addresses of the assets
   * @param sources The addresses of the price sources
   */
  function setAssetSources(address[] calldata assets, address[] calldata sources) external;

  /**
   * @notice Sets the fallback oracle
   * @param fallbackOracle The address of the fallback oracle
   */
  function setFallbackOracle(address fallbackOracle) external;

  /**
   * @notice Returns a list of prices from a list of assets addresses
   * @param assets The list of assets addresses
   * @return The prices of the given assets
   */
  function getAssetsPrices(address[] calldata assets) external view returns (uint256[] memory);

  /**
   * @notice Returns the address of the source for an asset address
   * @param asset The address of the asset
   * @return The address of the source
   */
  function getSourceOfAsset(address asset) external view returns (address);

  /**
   * @notice Returns the address of the fallback oracle
   * @return The address of the fallback oracle
   */
  function getFallbackOracle() external view returns (address);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {IReserveInterestRateStrategy} from './IReserveInterestRateStrategy.sol';
import {IPoolAddressesProvider} from './IPoolAddressesProvider.sol';

/**
 * @title IDefaultInterestRateStrategyV2
 * @author BGD Labs
 * @notice Interface of the default interest rate strategy used by the Aave protocol
 */
interface IDefaultInterestRateStrategyV2 is IReserveInterestRateStrategy {
  struct CalcInterestRatesLocalVars {
    uint256 availableLiquidity;
    uint256 totalDebt;
    uint256 currentVariableBorrowRate;
    uint256 currentLiquidityRate;
    uint256 borrowUsageRatio;
    uint256 supplyUsageRatio;
    uint256 availableLiquidityPlusDebt;
  }

  /**
   * @notice Holds the interest rate data for a given reserve
   *
   * @dev Since values are in bps, they are multiplied by 1e23 in order to become rays with 27 decimals. This
   * in turn means that the maximum supported interest rate is 4294967295 (2**32-1) bps or 42949672.95%.
   *
   * @param optimalUsageRatio The optimal usage ratio, in bps
   * @param baseVariableBorrowRate The base variable borrow rate, in bps
   * @param variableRateSlope1 The slope of the variable interest curve, before hitting the optimal ratio, in bps
   * @param variableRateSlope2 The slope of the variable interest curve, after hitting the optimal ratio, in bps
   */
  struct InterestRateData {
    uint16 optimalUsageRatio;
    uint32 baseVariableBorrowRate;
    uint32 variableRateSlope1;
    uint32 variableRateSlope2;
  }

  /**
   * @notice The interest rate data, where all values are in ray (fixed-point 27 decimal numbers) for a given reserve,
   * used in in-memory calculations.
   *
   * @param optimalUsageRatio The optimal usage ratio
   * @param baseVariableBorrowRate The base variable borrow rate
   * @param variableRateSlope1 The slope of the variable interest curve, before hitting the optimal ratio
   * @param variableRateSlope2 The slope of the variable interest curve, after hitting the optimal ratio
   */
  struct InterestRateDataRay {
    uint256 optimalUsageRatio;
    uint256 baseVariableBorrowRate;
    uint256 variableRateSlope1;
    uint256 variableRateSlope2;
  }

  /**
   * @notice emitted when new interest rate data is set in a reserve
   *
   * @param reserve address of the reserve that has new interest rate data set
   * @param optimalUsageRatio The optimal usage ratio, in bps
   * @param baseVariableBorrowRate The base variable borrow rate, in bps
   * @param variableRateSlope1 The slope of the variable interest curve, before hitting the optimal ratio, in bps
   * @param variableRateSlope2 The slope of the variable interest curve, after hitting the optimal ratio, in bps
   */
  event RateDataUpdate(
    address indexed reserve,
    uint256 optimalUsageRatio,
    uint256 baseVariableBorrowRate,
    uint256 variableRateSlope1,
    uint256 variableRateSlope2
  );

  /**
   * @notice Returns the address of the PoolAddressesProvider
   * @return The address of the PoolAddressesProvider contract
   */
  function ADDRESSES_PROVIDER() external view returns (IPoolAddressesProvider);

  /**
   * @notice Returns the maximum value achievable for variable borrow rate, in bps
   * @return The maximum rate
   */
  function MAX_BORROW_RATE() external view returns (uint256);

  /**
   * @notice Returns the minimum optimal point, in bps
   * @return The optimal point
   */
  function MIN_OPTIMAL_POINT() external view returns (uint256);

  /**
   * @notice Returns the maximum optimal point, in bps
   * @return The optimal point
   */
  function MAX_OPTIMAL_POINT() external view returns (uint256);

  /**
   * notice Returns the full InterestRateData object for the given reserve, in ray
   *
   * @param reserve The reserve to get the data of
   *
   * @return The InterestRateDataRay object for the given reserve
   */
  function getInterestRateData(address reserve) external view returns (InterestRateDataRay memory);

  /**
   * notice Returns the full InterestRateDataRay object for the given reserve, in bps
   *
   * @param reserve The reserve to get the data of
   *
   * @return The InterestRateData object for the given reserve
   */
  function getInterestRateDataBps(address reserve) external view returns (InterestRateData memory);

  /**
   * @notice Returns the optimal usage rate for the given reserve in ray
   *
   * @param reserve The reserve to get the optimal usage rate of
   *
   * @return The optimal usage rate is the level of borrow / collateral at which the borrow rate
   */
  function getOptimalUsageRatio(address reserve) external view returns (uint256);

  /**
   * @notice Returns the variable rate slope below optimal usage ratio in ray
   * @dev It's the variable rate when usage ratio > 0 and <= OPTIMAL_USAGE_RATIO
   *
   * @param reserve The reserve to get the variable rate slope 1 of
   *
   * @return The variable rate slope
   */
  function getVariableRateSlope1(address reserve) external view returns (uint256);

  /**
   * @notice Returns the variable rate slope above optimal usage ratio in ray
   * @dev It's the variable rate when usage ratio > OPTIMAL_USAGE_RATIO
   *
   * @param reserve The reserve to get the variable rate slope 2 of
   *
   * @return The variable rate slope
   */
  function getVariableRateSlope2(address reserve) external view returns (uint256);

  /**
   * @notice Returns the base variable borrow rate, in ray
   *
   * @param reserve The reserve to get the base variable borrow rate of
   *
   * @return The base variable borrow rate
   */
  function getBaseVariableBorrowRate(address reserve) external view returns (uint256);

  /**
   * @notice Returns the maximum variable borrow rate, in ray
   *
   * @param reserve The reserve to get the maximum variable borrow rate of
   *
   * @return The maximum variable borrow rate
   */
  function getMaxVariableBorrowRate(address reserve) external view returns (uint256);

  /**
   * @notice Sets interest rate data for an Aave rate strategy
   * @param reserve The reserve to update
   * @param rateData The reserve interest rate data to apply to the given reserve
   *   Being specific to this custom implementation, with custom struct type,
   *   overloading the function on the generic interface
   */
  function setInterestRateParams(address reserve, InterestRateData calldata rateData) external;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {IAaveIncentivesController} from './IAaveIncentivesController.sol';
import {IPool} from './IPool.sol';

/**
 * @title IInitializableAToken
 * @author Aave
 * @notice Interface for the initialize function on AToken
 */
interface IInitializableAToken {
  /**
   * @dev Emitted when an aToken is initialized
   * @param underlyingAsset The address of the underlying asset
   * @param pool The address of the associated pool
   * @param treasury The address of the treasury
   * @param incentivesController The address of the incentives controller for this aToken
   * @param aTokenDecimals The decimals of the underlying
   * @param aTokenName The name of the aToken
   * @param aTokenSymbol The symbol of the aToken
   * @param params A set of encoded parameters for additional initialization
   */
  event Initialized(
    address indexed underlyingAsset,
    address indexed pool,
    address treasury,
    address incentivesController,
    uint8 aTokenDecimals,
    string aTokenName,
    string aTokenSymbol,
    bytes params
  );

  /**
   * @notice Initializes the aToken
   * @param pool The pool contract that is initializing this contract
   * @param treasury The address of the Aave treasury, receiving the fees on this aToken
   * @param underlyingAsset The address of the underlying asset of this aToken (E.g. WETH for aWETH)
   * @param incentivesController The smart contract managing potential incentives distribution
   * @param aTokenDecimals The decimals of the aToken, same as the underlying asset's
   * @param aTokenName The name of the aToken
   * @param aTokenSymbol The symbol of the aToken
   * @param params A set of encoded parameters for additional initialization
   */
  function initialize(
    IPool pool,
    address treasury,
    address underlyingAsset,
    IAaveIncentivesController incentivesController,
    uint8 aTokenDecimals,
    string calldata aTokenName,
    string calldata aTokenSymbol,
    bytes calldata params
  ) external;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {IPoolAddressesProvider} from './IPoolAddressesProvider.sol';
import {DataTypes} from '../protocol/libraries/types/DataTypes.sol';

/**
 * @title IPool
 * @author Aave
 * @notice Defines the basic interface for an Aave Pool.
 */
interface IPool {
  /**
   * @dev Emitted on mintUnbacked()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address initiating the supply
   * @param onBehalfOf The beneficiary of the supplied assets, receiving the aTokens
   * @param amount The amount of supplied assets
   * @param referralCode The referral code used
   */
  event MintUnbacked(
    address indexed reserve,
    address user,
    address indexed onBehalfOf,
    uint256 amount,
    uint16 indexed referralCode
  );

  /**
   * @dev Emitted on backUnbacked()
   * @param reserve The address of the underlying asset of the reserve
   * @param backer The address paying for the backing
   * @param amount The amount added as backing
   * @param fee The amount paid in fees
   */
  event BackUnbacked(address indexed reserve, address indexed backer, uint256 amount, uint256 fee);

  /**
   * @dev Emitted on supply()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address initiating the supply
   * @param onBehalfOf The beneficiary of the supply, receiving the aTokens
   * @param amount The amount supplied
   * @param referralCode The referral code used
   */
  event Supply(
    address indexed reserve,
    address user,
    address indexed onBehalfOf,
    uint256 amount,
    uint16 indexed referralCode
  );

  /**
   * @dev Emitted on withdraw()
   * @param reserve The address of the underlying asset being withdrawn
   * @param user The address initiating the withdrawal, owner of aTokens
   * @param to The address that will receive the underlying
   * @param amount The amount to be withdrawn
   */
  event Withdraw(address indexed reserve, address indexed user, address indexed to, uint256 amount);

  /**
   * @dev Emitted on borrow() and flashLoan() when debt needs to be opened
   * @param reserve The address of the underlying asset being borrowed
   * @param user The address of the user initiating the borrow(), receiving the funds on borrow() or just
   * initiator of the transaction on flashLoan()
   * @param onBehalfOf The address that will be getting the debt
   * @param amount The amount borrowed out
   * @param interestRateMode The rate mode: 1 for Stable, 2 for Variable
   * @param borrowRate The numeric rate at which the user has borrowed, expressed in ray
   * @param referralCode The referral code used
   */
  event Borrow(
    address indexed reserve,
    address user,
    address indexed onBehalfOf,
    uint256 amount,
    DataTypes.InterestRateMode interestRateMode,
    uint256 borrowRate,
    uint16 indexed referralCode
  );

  /**
   * @dev Emitted on repay()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The beneficiary of the repayment, getting his debt reduced
   * @param repayer The address of the user initiating the repay(), providing the funds
   * @param amount The amount repaid
   * @param useATokens True if the repayment is done using aTokens, `false` if done with underlying asset directly
   */
  event Repay(
    address indexed reserve,
    address indexed user,
    address indexed repayer,
    uint256 amount,
    bool useATokens
  );

  /**
   * @dev Emitted on swapBorrowRateMode()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address of the user swapping his rate mode
   * @param interestRateMode The current interest rate mode of the position being swapped: 1 for Stable, 2 for Variable
   */
  event SwapBorrowRateMode(
    address indexed reserve,
    address indexed user,
    DataTypes.InterestRateMode interestRateMode
  );

  /**
   * @dev Emitted on borrow(), repay() and liquidationCall() when using isolated assets
   * @param asset The address of the underlying asset of the reserve
   * @param totalDebt The total isolation mode debt for the reserve
   */
  event IsolationModeTotalDebtUpdated(address indexed asset, uint256 totalDebt);

  /**
   * @dev Emitted when the user selects a certain asset category for eMode
   * @param user The address of the user
   * @param categoryId The category id
   */
  event UserEModeSet(address indexed user, uint8 categoryId);

  /**
   * @dev Emitted on setUserUseReserveAsCollateral()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address of the user enabling the usage as collateral
   */
  event ReserveUsedAsCollateralEnabled(address indexed reserve, address indexed user);

  /**
   * @dev Emitted on setUserUseReserveAsCollateral()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address of the user enabling the usage as collateral
   */
  event ReserveUsedAsCollateralDisabled(address indexed reserve, address indexed user);

  /**
   * @dev Emitted on rebalanceStableBorrowRate()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address of the user for which the rebalance has been executed
   */
  event RebalanceStableBorrowRate(address indexed reserve, address indexed user);

  /**
   * @dev Emitted on flashLoan()
   * @param target The address of the flash loan receiver contract
   * @param initiator The address initiating the flash loan
   * @param asset The address of the asset being flash borrowed
   * @param amount The amount flash borrowed
   * @param interestRateMode The flashloan mode: 0 for regular flashloan, 1 for Stable debt, 2 for Variable debt
   * @param premium The fee flash borrowed
   * @param referralCode The referral code used
   */
  event FlashLoan(
    address indexed target,
    address initiator,
    address indexed asset,
    uint256 amount,
    DataTypes.InterestRateMode interestRateMode,
    uint256 premium,
    uint16 indexed referralCode
  );

  /**
   * @dev Emitted when a borrower is liquidated.
   * @param collateralAsset The address of the underlying asset used as collateral, to receive as result of the liquidation
   * @param debtAsset The address of the underlying borrowed asset to be repaid with the liquidation
   * @param user The address of the borrower getting liquidated
   * @param debtToCover The debt amount of borrowed `asset` the liquidator wants to cover
   * @param liquidatedCollateralAmount The amount of collateral received by the liquidator
   * @param liquidator The address of the liquidator
   * @param receiveAToken True if the liquidators wants to receive the collateral aTokens, `false` if he wants
   * to receive the underlying collateral asset directly
   */
  event LiquidationCall(
    address indexed collateralAsset,
    address indexed debtAsset,
    address indexed user,
    uint256 debtToCover,
    uint256 liquidatedCollateralAmount,
    address liquidator,
    bool receiveAToken
  );

  /**
   * @dev Emitted when the state of a reserve is updated.
   * @param reserve The address of the underlying asset of the reserve
   * @param liquidityRate The next liquidity rate
   * @param stableBorrowRate The next stable borrow rate
   * @param variableBorrowRate The next variable borrow rate
   * @param liquidityIndex The next liquidity index
   * @param variableBorrowIndex The next variable borrow index
   */
  event ReserveDataUpdated(
    address indexed reserve,
    uint256 liquidityRate,
    uint256 stableBorrowRate,
    uint256 variableBorrowRate,
    uint256 liquidityIndex,
    uint256 variableBorrowIndex
  );

  /**
   * @dev Emitted when the protocol treasury receives minted aTokens from the accrued interest.
   * @param reserve The address of the reserve
   * @param amountMinted The amount minted to the treasury
   */
  event MintedToTreasury(address indexed reserve, uint256 amountMinted);

  /**
   * @notice Mints an `amount` of aTokens to the `onBehalfOf`
   * @param asset The address of the underlying asset to mint
   * @param amount The amount to mint
   * @param onBehalfOf The address that will receive the aTokens
   * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   */
  function mintUnbacked(
    address asset,
    uint256 amount,
    address onBehalfOf,
    uint16 referralCode
  ) external;

  /**
   * @notice Back the current unbacked underlying with `amount` and pay `fee`.
   * @param asset The address of the underlying asset to back
   * @param amount The amount to back
   * @param fee The amount paid in fees
   * @return The backed amount
   */
  function backUnbacked(address asset, uint256 amount, uint256 fee) external returns (uint256);

  /**
   * @notice Supplies an `amount` of underlying asset into the reserve, receiving in return overlying aTokens.
   * - E.g. User supplies 100 USDC and gets in return 100 aUSDC
   * @param asset The address of the underlying asset to supply
   * @param amount The amount to be supplied
   * @param onBehalfOf The address that will receive the aTokens, same as msg.sender if the user
   *   wants to receive them on his own wallet, or a different address if the beneficiary of aTokens
   *   is a different wallet
   * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   */
  function supply(address asset, uint256 amount, address onBehalfOf, uint16 referralCode) external;

  /**
   * @notice Supply with transfer approval of asset to be supplied done via permit function
   * see: https://eips.ethereum.org/EIPS/eip-2612 and https://eips.ethereum.org/EIPS/eip-713
   * @param asset The address of the underlying asset to supply
   * @param amount The amount to be supplied
   * @param onBehalfOf The address that will receive the aTokens, same as msg.sender if the user
   *   wants to receive them on his own wallet, or a different address if the beneficiary of aTokens
   *   is a different wallet
   * @param deadline The deadline timestamp that the permit is valid
   * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   * @param permitV The V parameter of ERC712 permit sig
   * @param permitR The R parameter of ERC712 permit sig
   * @param permitS The S parameter of ERC712 permit sig
   */
  function supplyWithPermit(
    address asset,
    uint256 amount,
    address onBehalfOf,
    uint16 referralCode,
    uint256 deadline,
    uint8 permitV,
    bytes32 permitR,
    bytes32 permitS
  ) external;

  /**
   * @notice Withdraws an `amount` of underlying asset from the reserve, burning the equivalent aTokens owned
   * E.g. User has 100 aUSDC, calls withdraw() and receives 100 USDC, burning the 100 aUSDC
   * @param asset The address of the underlying asset to withdraw
   * @param amount The underlying amount to be withdrawn
   *   - Send the value type(uint256).max in order to withdraw the whole aToken balance
   * @param to The address that will receive the underlying, same as msg.sender if the user
   *   wants to receive it on his own wallet, or a different address if the beneficiary is a
   *   different wallet
   * @return The final amount withdrawn
   */
  function withdraw(address asset, uint256 amount, address to) external returns (uint256);

  /**
   * @notice Allows users to borrow a specific `amount` of the reserve underlying asset, provided that the borrower
   * already supplied enough collateral, or he was given enough allowance by a credit delegator on the
   * corresponding debt token (StableDebtToken or VariableDebtToken)
   * - E.g. User borrows 100 USDC passing as `onBehalfOf` his own address, receiving the 100 USDC in his wallet
   *   and 100 stable/variable debt tokens, depending on the `interestRateMode`
   * @param asset The address of the underlying asset to borrow
   * @param amount The amount to be borrowed
   * @param interestRateMode The interest rate mode at which the user wants to borrow: 1 for Stable, 2 for Variable
   * @param referralCode The code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   * @param onBehalfOf The address of the user who will receive the debt. Should be the address of the borrower itself
   * calling the function if he wants to borrow against his own collateral, or the address of the credit delegator
   * if he has been given credit delegation allowance
   */
  function borrow(
    address asset,
    uint256 amount,
    uint256 interestRateMode,
    uint16 referralCode,
    address onBehalfOf
  ) external;

  /**
   * @notice Repays a borrowed `amount` on a specific reserve, burning the equivalent debt tokens owned
   * - E.g. User repays 100 USDC, burning 100 variable/stable debt tokens of the `onBehalfOf` address
   * @param asset The address of the borrowed underlying asset previously borrowed
   * @param amount The amount to repay
   * - Send the value type(uint256).max in order to repay the whole debt for `asset` on the specific `debtMode`
   * @param interestRateMode The interest rate mode at of the debt the user wants to repay: 1 for Stable, 2 for Variable
   * @param onBehalfOf The address of the user who will get his debt reduced/removed. Should be the address of the
   * user calling the function if he wants to reduce/remove his own debt, or the address of any other
   * other borrower whose debt should be removed
   * @return The final amount repaid
   */
  function repay(
    address asset,
    uint256 amount,
    uint256 interestRateMode,
    address onBehalfOf
  ) external returns (uint256);

  /**
   * @notice Repay with transfer approval of asset to be repaid done via permit function
   * see: https://eips.ethereum.org/EIPS/eip-2612 and https://eips.ethereum.org/EIPS/eip-713
   * @param asset The address of the borrowed underlying asset previously borrowed
   * @param amount The amount to repay
   * - Send the value type(uint256).max in order to repay the whole debt for `asset` on the specific `debtMode`
   * @param interestRateMode The interest rate mode at of the debt the user wants to repay: 1 for Stable, 2 for Variable
   * @param onBehalfOf Address of the user who will get his debt reduced/removed. Should be the address of the
   * user calling the function if he wants to reduce/remove his own debt, or the address of any other
   * other borrower whose debt should be removed
   * @param deadline The deadline timestamp that the permit is valid
   * @param permitV The V parameter of ERC712 permit sig
   * @param permitR The R parameter of ERC712 permit sig
   * @param permitS The S parameter of ERC712 permit sig
   * @return The final amount repaid
   */
  function repayWithPermit(
    address asset,
    uint256 amount,
    uint256 interestRateMode,
    address onBehalfOf,
    uint256 deadline,
    uint8 permitV,
    bytes32 permitR,
    bytes32 permitS
  ) external returns (uint256);

  /**
   * @notice Repays a borrowed `amount` on a specific reserve using the reserve aTokens, burning the
   * equivalent debt tokens
   * - E.g. User repays 100 USDC using 100 aUSDC, burning 100 variable/stable debt tokens
   * @dev  Passing uint256.max as amount will clean up any residual aToken dust balance, if the user aToken
   * balance is not enough to cover the whole debt
   * @param asset The address of the borrowed underlying asset previously borrowed
   * @param amount The amount to repay
   * - Send the value type(uint256).max in order to repay the whole debt for `asset` on the specific `debtMode`
   * @param interestRateMode The interest rate mode at of the debt the user wants to repay: 1 for Stable, 2 for Variable
   * @return The final amount repaid
   */
  function repayWithATokens(
    address asset,
    uint256 amount,
    uint256 interestRateMode
  ) external returns (uint256);

  /**
   * @notice Allows a borrower to swap his debt between stable and variable mode, or vice versa
   * @param asset The address of the underlying asset borrowed
   * @param interestRateMode The current interest rate mode of the position being swapped: 1 for Stable, 2 for Variable
   */
  function swapBorrowRateMode(address asset, uint256 interestRateMode) external;

  /**
   * @notice Permissionless method which allows anyone to swap a users stable debt to variable debt
   * @dev Introduced in favor of stable rate deprecation
   * @param asset The address of the underlying asset borrowed
   * @param user The address of the user whose debt will be swapped from stable to variable
   */
  function swapToVariable(address asset, address user) external;

  /**
   * @notice Rebalances the stable interest rate of a user to the current stable rate defined on the reserve.
   * - Users can be rebalanced if the following conditions are satisfied:
   *     1. Usage ratio is above 95%
   *     2. the current supply APY is below REBALANCE_UP_THRESHOLD * maxVariableBorrowRate, which means that too
   *        much has been borrowed at a stable rate and suppliers are not earning enough
   * @param asset The address of the underlying asset borrowed
   * @param user The address of the user to be rebalanced
   */
  function rebalanceStableBorrowRate(address asset, address user) external;

  /**
   * @notice Allows suppliers to enable/disable a specific supplied asset as collateral
   * @param asset The address of the underlying asset supplied
   * @param useAsCollateral True if the user wants to use the supply as collateral, false otherwise
   */
  function setUserUseReserveAsCollateral(address asset, bool useAsCollateral) external;

  /**
   * @notice Function to liquidate a non-healthy position collateral-wise, with Health Factor below 1
   * - The caller (liquidator) covers `debtToCover` amount of debt of the user getting liquidated, and receives
   *   a proportionally amount of the `collateralAsset` plus a bonus to cover market risk
   * @param collateralAsset The address of the underlying asset used as collateral, to receive as result of the liquidation
   * @param debtAsset The address of the underlying borrowed asset to be repaid with the liquidation
   * @param user The address of the borrower getting liquidated
   * @param debtToCover The debt amount of borrowed `asset` the liquidator wants to cover
   * @param receiveAToken True if the liquidators wants to receive the collateral aTokens, `false` if he wants
   * to receive the underlying collateral asset directly
   */
  function liquidationCall(
    address collateralAsset,
    address debtAsset,
    address user,
    uint256 debtToCover,
    bool receiveAToken
  ) external;

  /**
   * @notice Allows smartcontracts to access the liquidity of the pool within one transaction,
   * as long as the amount taken plus a fee is returned.
   * @dev IMPORTANT There are security concerns for developers of flashloan receiver contracts that must be kept
   * into consideration. For further details please visit https://docs.aave.com/developers/
   * @param receiverAddress The address of the contract receiving the funds, implementing IFlashLoanReceiver interface
   * @param assets The addresses of the assets being flash-borrowed
   * @param amounts The amounts of the assets being flash-borrowed
   * @param interestRateModes Types of the debt to open if the flash loan is not returned:
   *   0 -> Don't open any debt, just revert if funds can't be transferred from the receiver
   *   1 -> Open debt at stable rate for the value of the amount flash-borrowed to the `onBehalfOf` address
   *   2 -> Open debt at variable rate for the value of the amount flash-borrowed to the `onBehalfOf` address
   * @param onBehalfOf The address  that will receive the debt in the case of using on `modes` 1 or 2
   * @param params Variadic packed params to pass to the receiver as extra information
   * @param referralCode The code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   */
  function flashLoan(
    address receiverAddress,
    address[] calldata assets,
    uint256[] calldata amounts,
    uint256[] calldata interestRateModes,
    address onBehalfOf,
    bytes calldata params,
    uint16 referralCode
  ) external;

  /**
   * @notice Allows smartcontracts to access the liquidity of the pool within one transaction,
   * as long as the amount taken plus a fee is returned.
   * @dev IMPORTANT There are security concerns for developers of flashloan receiver contracts that must be kept
   * into consideration. For further details please visit https://docs.aave.com/developers/
   * @param receiverAddress The address of the contract receiving the funds, implementing IFlashLoanSimpleReceiver interface
   * @param asset The address of the asset being flash-borrowed
   * @param amount The amount of the asset being flash-borrowed
   * @param params Variadic packed params to pass to the receiver as extra information
   * @param referralCode The code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   */
  function flashLoanSimple(
    address receiverAddress,
    address asset,
    uint256 amount,
    bytes calldata params,
    uint16 referralCode
  ) external;

  /**
   * @notice Returns the user account data across all the reserves
   * @param user The address of the user
   * @return totalCollateralBase The total collateral of the user in the base currency used by the price feed
   * @return totalDebtBase The total debt of the user in the base currency used by the price feed
   * @return availableBorrowsBase The borrowing power left of the user in the base currency used by the price feed
   * @return currentLiquidationThreshold The liquidation threshold of the user
   * @return ltv The loan to value of The user
   * @return healthFactor The current health factor of the user
   */
  function getUserAccountData(
    address user
  )
    external
    view
    returns (
      uint256 totalCollateralBase,
      uint256 totalDebtBase,
      uint256 availableBorrowsBase,
      uint256 currentLiquidationThreshold,
      uint256 ltv,
      uint256 healthFactor
    );

  /**
   * @notice Initializes a reserve, activating it, assigning an aToken and debt tokens and an
   * interest rate strategy
   * @dev Only callable by the PoolConfigurator contract
   * @param asset The address of the underlying asset of the reserve
   * @param aTokenAddress The address of the aToken that will be assigned to the reserve
   * @param stableDebtAddress The address of the StableDebtToken that will be assigned to the reserve
   * @param variableDebtAddress The address of the VariableDebtToken that will be assigned to the reserve
   * @param interestRateStrategyAddress The address of the interest rate strategy contract
   */
  function initReserve(
    address asset,
    address aTokenAddress,
    address stableDebtAddress,
    address variableDebtAddress,
    address interestRateStrategyAddress
  ) external;

  /**
   * @notice Drop a reserve
   * @dev Only callable by the PoolConfigurator contract
   * @param asset The address of the underlying asset of the reserve
   */
  function dropReserve(address asset) external;

  /**
   * @notice Updates the address of the interest rate strategy contract
   * @dev Only callable by the PoolConfigurator contract
   * @param asset The address of the underlying asset of the reserve
   * @param rateStrategyAddress The address of the interest rate strategy contract
   */
  function setReserveInterestRateStrategyAddress(
    address asset,
    address rateStrategyAddress
  ) external;

  /**
   * @notice Accumulates interest to all indexes of the reserve
   * @dev Only callable by the PoolConfigurator contract
   * @dev To be used when required by the configurator, for example when updating interest rates strategy data
   * @param asset The address of the underlying asset of the reserve
   */
  function syncIndexesState(address asset) external;

  /**
   * @notice Updates interest rates on the reserve data
   * @dev Only callable by the PoolConfigurator contract
   * @dev To be used when required by the configurator, for example when updating interest rates strategy data
   * @param asset The address of the underlying asset of the reserve
   */
  function syncRatesState(address asset) external;

  /**
   * @notice Sets the configuration bitmap of the reserve as a whole
   * @dev Only callable by the PoolConfigurator contract
   * @param asset The address of the underlying asset of the reserve
   * @param configuration The new configuration bitmap
   */
  function setConfiguration(
    address asset,
    DataTypes.ReserveConfigurationMap calldata configuration
  ) external;

  /**
   * @notice Returns the configuration of the reserve
   * @param asset The address of the underlying asset of the reserve
   * @return The configuration of the reserve
   */
  function getConfiguration(
    address asset
  ) external view returns (DataTypes.ReserveConfigurationMap memory);

  /**
   * @notice Returns the configuration of the user across all the reserves
   * @param user The user address
   * @return The configuration of the user
   */
  function getUserConfiguration(
    address user
  ) external view returns (DataTypes.UserConfigurationMap memory);

  /**
   * @notice Returns the normalized income of the reserve
   * @param asset The address of the underlying asset of the reserve
   * @return The reserve's normalized income
   */
  function getReserveNormalizedIncome(address asset) external view returns (uint256);

  /**
   * @notice Returns the normalized variable debt per unit of asset
   * @dev WARNING: This function is intended to be used primarily by the protocol itself to get a
   * "dynamic" variable index based on time, current stored index and virtual rate at the current
   * moment (approx. a borrower would get if opening a position). This means that is always used in
   * combination with variable debt supply/balances.
   * If using this function externally, consider that is possible to have an increasing normalized
   * variable debt that is not equivalent to how the variable debt index would be updated in storage
   * (e.g. only updates with non-zero variable debt supply)
   * @param asset The address of the underlying asset of the reserve
   * @return The reserve normalized variable debt
   */
  function getReserveNormalizedVariableDebt(address asset) external view returns (uint256);

  /**
   * @notice Returns the state and configuration of the reserve
   * @param asset The address of the underlying asset of the reserve
   * @return The state and configuration data of the reserve
   */
  function getReserveData(address asset) external view returns (DataTypes.ReserveDataLegacy memory);

  /**
   * @notice Returns the state and configuration of the reserve, including extra data included with Aave v3.1
   * @param asset The address of the underlying asset of the reserve
   * @return The state and configuration data of the reserve with virtual accounting
   */
  function getReserveDataExtended(
    address asset
  ) external view returns (DataTypes.ReserveData memory);

  /**
   * @notice Returns the virtual underlying balance of the reserve
   * @param asset The address of the underlying asset of the reserve
   * @return The reserve virtual underlying balance
   */
  function getVirtualUnderlyingBalance(address asset) external view returns (uint128);

  /**
   * @notice Validates and finalizes an aToken transfer
   * @dev Only callable by the overlying aToken of the `asset`
   * @param asset The address of the underlying asset of the aToken
   * @param from The user from which the aTokens are transferred
   * @param to The user receiving the aTokens
   * @param amount The amount being transferred/withdrawn
   * @param balanceFromBefore The aToken balance of the `from` user before the transfer
   * @param balanceToBefore The aToken balance of the `to` user before the transfer
   */
  function finalizeTransfer(
    address asset,
    address from,
    address to,
    uint256 amount,
    uint256 balanceFromBefore,
    uint256 balanceToBefore
  ) external;

  /**
   * @notice Returns the list of the underlying assets of all the initialized reserves
   * @dev It does not include dropped reserves
   * @return The addresses of the underlying assets of the initialized reserves
   */
  function getReservesList() external view returns (address[] memory);

  /**
   * @notice Returns the number of initialized reserves
   * @dev It includes dropped reserves
   * @return The count
   */
  function getReservesCount() external view returns (uint256);

  /**
   * @notice Returns the address of the underlying asset of a reserve by the reserve id as stored in the DataTypes.ReserveData struct
   * @param id The id of the reserve as stored in the DataTypes.ReserveData struct
   * @return The address of the reserve associated with id
   */
  function getReserveAddressById(uint16 id) external view returns (address);

  /**
   * @notice Returns the PoolAddressesProvider connected to this contract
   * @return The address of the PoolAddressesProvider
   */
  function ADDRESSES_PROVIDER() external view returns (IPoolAddressesProvider);

  /**
   * @notice Updates the protocol fee on the bridging
   * @param bridgeProtocolFee The part of the premium sent to the protocol treasury
   */
  function updateBridgeProtocolFee(uint256 bridgeProtocolFee) external;

  /**
   * @notice Updates flash loan premiums. Flash loan premium consists of two parts:
   * - A part is sent to aToken holders as extra, one time accumulated interest
   * - A part is collected by the protocol treasury
   * @dev The total premium is calculated on the total borrowed amount
   * @dev The premium to protocol is calculated on the total premium, being a percentage of `flashLoanPremiumTotal`
   * @dev Only callable by the PoolConfigurator contract
   * @param flashLoanPremiumTotal The total premium, expressed in bps
   * @param flashLoanPremiumToProtocol The part of the premium sent to the protocol treasury, expressed in bps
   */
  function updateFlashloanPremiums(
    uint128 flashLoanPremiumTotal,
    uint128 flashLoanPremiumToProtocol
  ) external;

  /**
   * @notice Configures a new category for the eMode.
   * @dev In eMode, the protocol allows very high borrowing power to borrow assets of the same category.
   * The category 0 is reserved as it's the default for volatile assets
   * @param id The id of the category
   * @param config The configuration of the category
   */
  function configureEModeCategory(uint8 id, DataTypes.EModeCategory memory config) external;

  /**
   * @notice Returns the data of an eMode category
   * @param id The id of the category
   * @return The configuration data of the category
   */
  function getEModeCategoryData(uint8 id) external view returns (DataTypes.EModeCategory memory);

  /**
   * @notice Allows a user to use the protocol in eMode
   * @param categoryId The id of the category
   */
  function setUserEMode(uint8 categoryId) external;

  /**
   * @notice Returns the eMode the user is using
   * @param user The address of the user
   * @return The eMode id
   */
  function getUserEMode(address user) external view returns (uint256);

  /**
   * @notice Resets the isolation mode total debt of the given asset to zero
   * @dev It requires the given asset has zero debt ceiling
   * @param asset The address of the underlying asset to reset the isolationModeTotalDebt
   */
  function resetIsolationModeTotalDebt(address asset) external;

  /**
   * @notice Sets the liquidation grace period of the given asset
   * @dev To enable a liquidation grace period, a timestamp in the future should be set,
   *      To disable a liquidation grace period, any timestamp in the past works, like 0
   * @param asset The address of the underlying asset to set the liquidationGracePeriod
   * @param until Timestamp when the liquidation grace period will end
   **/
  function setLiquidationGracePeriod(address asset, uint40 until) external;

  /**
   * @notice Returns the liquidation grace period of the given asset
   * @param asset The address of the underlying asset
   * @return Timestamp when the liquidation grace period will end
   **/
  function getLiquidationGracePeriod(address asset) external returns (uint40);

  /**
   * @notice Returns the percentage of available liquidity that can be borrowed at once at stable rate
   * @return The percentage of available liquidity to borrow, expressed in bps
   */
  function MAX_STABLE_RATE_BORROW_SIZE_PERCENT() external view returns (uint256);

  /**
   * @notice Returns the total fee on flash loans
   * @return The total fee on flashloans
   */
  function FLASHLOAN_PREMIUM_TOTAL() external view returns (uint128);

  /**
   * @notice Returns the part of the bridge fees sent to protocol
   * @return The bridge fee sent to the protocol treasury
   */
  function BRIDGE_PROTOCOL_FEE() external view returns (uint256);

  /**
   * @notice Returns the part of the flashloan fees sent to protocol
   * @return The flashloan fee sent to the protocol treasury
   */
  function FLASHLOAN_PREMIUM_TO_PROTOCOL() external view returns (uint128);

  /**
   * @notice Returns the maximum number of reserves supported to be listed in this Pool
   * @return The maximum number of reserves supported
   */
  function MAX_NUMBER_RESERVES() external view returns (uint16);

  /**
   * @notice Mints the assets accrued through the reserve factor to the treasury in the form of aTokens
   * @param assets The list of reserves for which the minting needs to be executed
   */
  function mintToTreasury(address[] calldata assets) external;

  /**
   * @notice Rescue and transfer tokens locked in this contract
   * @param token The address of the token
   * @param to The address of the recipient
   * @param amount The amount of token to transfer
   */
  function rescueTokens(address token, address to, uint256 amount) external;

  /**
   * @notice Supplies an `amount` of underlying asset into the reserve, receiving in return overlying aTokens.
   * - E.g. User supplies 100 USDC and gets in return 100 aUSDC
   * @dev Deprecated: Use the `supply` function instead
   * @param asset The address of the underlying asset to supply
   * @param amount The amount to be supplied
   * @param onBehalfOf The address that will receive the aTokens, same as msg.sender if the user
   *   wants to receive them on his own wallet, or a different address if the beneficiary of aTokens
   *   is a different wallet
   * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   */
  function deposit(address asset, uint256 amount, address onBehalfOf, uint16 referralCode) external;

  /**
   * @notice Gets the address of the external FlashLoanLogic
   */
  function getFlashLoanLogic() external view returns (address);

  /**
   * @notice Gets the address of the external BorrowLogic
   */
  function getBorrowLogic() external view returns (address);

  /**
   * @notice Gets the address of the external BridgeLogic
   */
  function getBridgeLogic() external view returns (address);

  /**
   * @notice Gets the address of the external EModeLogic
   */
  function getEModeLogic() external view returns (address);

  /**
   * @notice Gets the address of the external LiquidationLogic
   */
  function getLiquidationLogic() external view returns (address);

  /**
   * @notice Gets the address of the external PoolLogic
   */
  function getPoolLogic() external view returns (address);

  /**
   * @notice Gets the address of the external SupplyLogic
   */
  function getSupplyLogic() external view returns (address);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

/**
 * @title IPoolAddressesProvider
 * @author Aave
 * @notice Defines the basic interface for a Pool Addresses Provider.
 */
interface IPoolAddressesProvider {
  /**
   * @dev Emitted when the market identifier is updated.
   * @param oldMarketId The old id of the market
   * @param newMarketId The new id of the market
   */
  event MarketIdSet(string indexed oldMarketId, string indexed newMarketId);

  /**
   * @dev Emitted when the pool is updated.
   * @param oldAddress The old address of the Pool
   * @param newAddress The new address of the Pool
   */
  event PoolUpdated(address indexed oldAddress, address indexed newAddress);

  /**
   * @dev Emitted when the pool configurator is updated.
   * @param oldAddress The old address of the PoolConfigurator
   * @param newAddress The new address of the PoolConfigurator
   */
  event PoolConfiguratorUpdated(address indexed oldAddress, address indexed newAddress);

  /**
   * @dev Emitted when the price oracle is updated.
   * @param oldAddress The old address of the PriceOracle
   * @param newAddress The new address of the PriceOracle
   */
  event PriceOracleUpdated(address indexed oldAddress, address indexed newAddress);

  /**
   * @dev Emitted when the ACL manager is updated.
   * @param oldAddress The old address of the ACLManager
   * @param newAddress The new address of the ACLManager
   */
  event ACLManagerUpdated(address indexed oldAddress, address indexed newAddress);

  /**
   * @dev Emitted when the ACL admin is updated.
   * @param oldAddress The old address of the ACLAdmin
   * @param newAddress The new address of the ACLAdmin
   */
  event ACLAdminUpdated(address indexed oldAddress, address indexed newAddress);

  /**
   * @dev Emitted when the price oracle sentinel is updated.
   * @param oldAddress The old address of the PriceOracleSentinel
   * @param newAddress The new address of the PriceOracleSentinel
   */
  event PriceOracleSentinelUpdated(address indexed oldAddress, address indexed newAddress);

  /**
   * @dev Emitted when the pool data provider is updated.
   * @param oldAddress The old address of the PoolDataProvider
   * @param newAddress The new address of the PoolDataProvider
   */
  event PoolDataProviderUpdated(address indexed oldAddress, address indexed newAddress);

  /**
   * @dev Emitted when a new proxy is created.
   * @param id The identifier of the proxy
   * @param proxyAddress The address of the created proxy contract
   * @param implementationAddress The address of the implementation contract
   */
  event ProxyCreated(
    bytes32 indexed id,
    address indexed proxyAddress,
    address indexed implementationAddress
  );

  /**
   * @dev Emitted when a new non-proxied contract address is registered.
   * @param id The identifier of the contract
   * @param oldAddress The address of the old contract
   * @param newAddress The address of the new contract
   */
  event AddressSet(bytes32 indexed id, address indexed oldAddress, address indexed newAddress);

  /**
   * @dev Emitted when the implementation of the proxy registered with id is updated
   * @param id The identifier of the contract
   * @param proxyAddress The address of the proxy contract
   * @param oldImplementationAddress The address of the old implementation contract
   * @param newImplementationAddress The address of the new implementation contract
   */
  event AddressSetAsProxy(
    bytes32 indexed id,
    address indexed proxyAddress,
    address oldImplementationAddress,
    address indexed newImplementationAddress
  );

  /**
   * @notice Returns the id of the Aave market to which this contract points to.
   * @return The market id
   */
  function getMarketId() external view returns (string memory);

  /**
   * @notice Associates an id with a specific PoolAddressesProvider.
   * @dev This can be used to create an onchain registry of PoolAddressesProviders to
   * identify and validate multiple Aave markets.
   * @param newMarketId The market id
   */
  function setMarketId(string calldata newMarketId) external;

  /**
   * @notice Returns an address by its identifier.
   * @dev The returned address might be an EOA or a contract, potentially proxied
   * @dev It returns ZERO if there is no registered address with the given id
   * @param id The id
   * @return The address of the registered for the specified id
   */
  function getAddress(bytes32 id) external view returns (address);

  /**
   * @notice General function to update the implementation of a proxy registered with
   * certain `id`. If there is no proxy registered, it will instantiate one and
   * set as implementation the `newImplementationAddress`.
   * @dev IMPORTANT Use this function carefully, only for ids that don't have an explicit
   * setter function, in order to avoid unexpected consequences
   * @param id The id
   * @param newImplementationAddress The address of the new implementation
   */
  function setAddressAsProxy(bytes32 id, address newImplementationAddress) external;

  /**
   * @notice Sets an address for an id replacing the address saved in the addresses map.
   * @dev IMPORTANT Use this function carefully, as it will do a hard replacement
   * @param id The id
   * @param newAddress The address to set
   */
  function setAddress(bytes32 id, address newAddress) external;

  /**
   * @notice Returns the address of the Pool proxy.
   * @return The Pool proxy address
   */
  function getPool() external view returns (address);

  /**
   * @notice Updates the implementation of the Pool, or creates a proxy
   * setting the new `pool` implementation when the function is called for the first time.
   * @param newPoolImpl The new Pool implementation
   */
  function setPoolImpl(address newPoolImpl) external;

  /**
   * @notice Returns the address of the PoolConfigurator proxy.
   * @return The PoolConfigurator proxy address
   */
  function getPoolConfigurator() external view returns (address);

  /**
   * @notice Updates the implementation of the PoolConfigurator, or creates a proxy
   * setting the new `PoolConfigurator` implementation when the function is called for the first time.
   * @param newPoolConfiguratorImpl The new PoolConfigurator implementation
   */
  function setPoolConfiguratorImpl(address newPoolConfiguratorImpl) external;

  /**
   * @notice Returns the address of the price oracle.
   * @return The address of the PriceOracle
   */
  function getPriceOracle() external view returns (address);

  /**
   * @notice Updates the address of the price oracle.
   * @param newPriceOracle The address of the new PriceOracle
   */
  function setPriceOracle(address newPriceOracle) external;

  /**
   * @notice Returns the address of the ACL manager.
   * @return The address of the ACLManager
   */
  function getACLManager() external view returns (address);

  /**
   * @notice Updates the address of the ACL manager.
   * @param newAclManager The address of the new ACLManager
   */
  function setACLManager(address newAclManager) external;

  /**
   * @notice Returns the address of the ACL admin.
   * @return The address of the ACL admin
   */
  function getACLAdmin() external view returns (address);

  /**
   * @notice Updates the address of the ACL admin.
   * @param newAclAdmin The address of the new ACL admin
   */
  function setACLAdmin(address newAclAdmin) external;

  /**
   * @notice Returns the address of the price oracle sentinel.
   * @return The address of the PriceOracleSentinel
   */
  function getPriceOracleSentinel() external view returns (address);

  /**
   * @notice Updates the address of the price oracle sentinel.
   * @param newPriceOracleSentinel The address of the new PriceOracleSentinel
   */
  function setPriceOracleSentinel(address newPriceOracleSentinel) external;

  /**
   * @notice Returns the address of the data provider.
   * @return The address of the DataProvider
   */
  function getPoolDataProvider() external view returns (address);

  /**
   * @notice Updates the address of the data provider.
   * @param newDataProvider The address of the new DataProvider
   */
  function setPoolDataProvider(address newDataProvider) external;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {ConfiguratorInputTypes} from '../protocol/libraries/types/ConfiguratorInputTypes.sol';
import {IDefaultInterestRateStrategyV2} from './IDefaultInterestRateStrategyV2.sol';

/**
 * @title IPoolConfigurator
 * @author Aave
 * @notice Defines the basic interface for a Pool configurator.
 */
interface IPoolConfigurator {
  /**
   * @dev Emitted when a reserve is initialized.
   * @param asset The address of the underlying asset of the reserve
   * @param aToken The address of the associated aToken contract
   * @param stableDebtToken The address of the associated stable rate debt token
   * @param variableDebtToken The address of the associated variable rate debt token
   * @param interestRateStrategyAddress The address of the interest rate strategy for the reserve
   */
  event ReserveInitialized(
    address indexed asset,
    address indexed aToken,
    address stableDebtToken,
    address variableDebtToken,
    address interestRateStrategyAddress
  );

  /**
   * @dev Emitted when borrowing is enabled or disabled on a reserve.
   * @param asset The address of the underlying asset of the reserve
   * @param enabled True if borrowing is enabled, false otherwise
   */
  event ReserveBorrowing(address indexed asset, bool enabled);

  /**
   * @dev Emitted when flashloans are enabled or disabled on a reserve.
   * @param asset The address of the underlying asset of the reserve
   * @param enabled True if flashloans are enabled, false otherwise
   */
  event ReserveFlashLoaning(address indexed asset, bool enabled);

  /**
   * @dev Emitted when the ltv is set for the frozen asset.
   * @param asset The address of the underlying asset of the reserve
   * @param ltv The loan to value of the asset when used as collateral
   */
  event PendingLtvChanged(address indexed asset, uint256 ltv);

  /**
   * @dev Emitted when the collateralization risk parameters for the specified asset are updated.
   * @param asset The address of the underlying asset of the reserve
   * @param ltv The loan to value of the asset when used as collateral
   * @param liquidationThreshold The threshold at which loans using this asset as collateral will be considered undercollateralized
   * @param liquidationBonus The bonus liquidators receive to liquidate this asset
   */
  event CollateralConfigurationChanged(
    address indexed asset,
    uint256 ltv,
    uint256 liquidationThreshold,
    uint256 liquidationBonus
  );

  /**
   * @dev Emitted when stable rate borrowing is enabled or disabled on a reserve
   * @param asset The address of the underlying asset of the reserve
   * @param enabled True if stable rate borrowing is enabled, false otherwise
   */
  event ReserveStableRateBorrowing(address indexed asset, bool enabled);

  /**
   * @dev Emitted when a reserve is activated or deactivated
   * @param asset The address of the underlying asset of the reserve
   * @param active True if reserve is active, false otherwise
   */
  event ReserveActive(address indexed asset, bool active);

  /**
   * @dev Emitted when a reserve is frozen or unfrozen
   * @param asset The address of the underlying asset of the reserve
   * @param frozen True if reserve is frozen, false otherwise
   */
  event ReserveFrozen(address indexed asset, bool frozen);

  /**
   * @dev Emitted when a reserve is paused or unpaused
   * @param asset The address of the underlying asset of the reserve
   * @param paused True if reserve is paused, false otherwise
   */
  event ReservePaused(address indexed asset, bool paused);

  /**
   * @dev Emitted when a reserve is dropped.
   * @param asset The address of the underlying asset of the reserve
   */
  event ReserveDropped(address indexed asset);

  /**
   * @dev Emitted when a reserve factor is updated.
   * @param asset The address of the underlying asset of the reserve
   * @param oldReserveFactor The old reserve factor, expressed in bps
   * @param newReserveFactor The new reserve factor, expressed in bps
   */
  event ReserveFactorChanged(
    address indexed asset,
    uint256 oldReserveFactor,
    uint256 newReserveFactor
  );

  /**
   * @dev Emitted when the borrow cap of a reserve is updated.
   * @param asset The address of the underlying asset of the reserve
   * @param oldBorrowCap The old borrow cap
   * @param newBorrowCap The new borrow cap
   */
  event BorrowCapChanged(address indexed asset, uint256 oldBorrowCap, uint256 newBorrowCap);

  /**
   * @dev Emitted when the supply cap of a reserve is updated.
   * @param asset The address of the underlying asset of the reserve
   * @param oldSupplyCap The old supply cap
   * @param newSupplyCap The new supply cap
   */
  event SupplyCapChanged(address indexed asset, uint256 oldSupplyCap, uint256 newSupplyCap);

  /**
   * @dev Emitted when the liquidation protocol fee of a reserve is updated.
   * @param asset The address of the underlying asset of the reserve
   * @param oldFee The old liquidation protocol fee, expressed in bps
   * @param newFee The new liquidation protocol fee, expressed in bps
   */
  event LiquidationProtocolFeeChanged(address indexed asset, uint256 oldFee, uint256 newFee);

  /**
   * @dev Emitted when the liquidation grace period is updated.
   * @param asset The address of the underlying asset of the reserve
   * @param gracePeriodUntil Timestamp until when liquidations will not be allowed post-unpause
   */
  event LiquidationGracePeriodChanged(address indexed asset, uint40 gracePeriodUntil);

  /**
   * @dev Emitted when the liquidation grace period is disabled.
   * @param asset The address of the underlying asset of the reserve
   */
  event LiquidationGracePeriodDisabled(address indexed asset);

  /**
   * @dev Emitted when the unbacked mint cap of a reserve is updated.
   * @param asset The address of the underlying asset of the reserve
   * @param oldUnbackedMintCap The old unbacked mint cap
   * @param newUnbackedMintCap The new unbacked mint cap
   */
  event UnbackedMintCapChanged(
    address indexed asset,
    uint256 oldUnbackedMintCap,
    uint256 newUnbackedMintCap
  );

  /**
   * @dev Emitted when the category of an asset in eMode is changed.
   * @param asset The address of the underlying asset of the reserve
   * @param oldCategoryId The old eMode asset category
   * @param newCategoryId The new eMode asset category
   */
  event EModeAssetCategoryChanged(address indexed asset, uint8 oldCategoryId, uint8 newCategoryId);

  /**
   * @dev Emitted when a new eMode category is added.
   * @param categoryId The new eMode category id
   * @param ltv The ltv for the asset category in eMode
   * @param liquidationThreshold The liquidationThreshold for the asset category in eMode
   * @param liquidationBonus The liquidationBonus for the asset category in eMode
   * @param oracle The optional address of the price oracle specific for this category
   * @param label A human readable identifier for the category
   */
  event EModeCategoryAdded(
    uint8 indexed categoryId,
    uint256 ltv,
    uint256 liquidationThreshold,
    uint256 liquidationBonus,
    address oracle,
    string label
  );

  /**
   * @dev Emitted when a reserve interest strategy contract is updated.
   * @param asset The address of the underlying asset of the reserve
   * @param oldStrategy The address of the old interest strategy contract
   * @param newStrategy The address of the new interest strategy contract
   */
  event ReserveInterestRateStrategyChanged(
    address indexed asset,
    address oldStrategy,
    address newStrategy
  );

  /**
   * @dev Emitted when the data of a reserve interest strategy contract is updated.
   * @param asset The address of the underlying asset of the reserve
   * @param data abi encoded data
   */
  event ReserveInterestRateDataChanged(address indexed asset, address indexed strategy, bytes data);

  /**
   * @dev Emitted when an aToken implementation is upgraded.
   * @param asset The address of the underlying asset of the reserve
   * @param proxy The aToken proxy address
   * @param implementation The new aToken implementation
   */
  event ATokenUpgraded(
    address indexed asset,
    address indexed proxy,
    address indexed implementation
  );

  /**
   * @dev Emitted when the implementation of a stable debt token is upgraded.
   * @param asset The address of the underlying asset of the reserve
   * @param proxy The stable debt token proxy address
   * @param implementation The new aToken implementation
   */
  event StableDebtTokenUpgraded(
    address indexed asset,
    address indexed proxy,
    address indexed implementation
  );

  /**
   * @dev Emitted when the implementation of a variable debt token is upgraded.
   * @param asset The address of the underlying asset of the reserve
   * @param proxy The variable debt token proxy address
   * @param implementation The new aToken implementation
   */
  event VariableDebtTokenUpgraded(
    address indexed asset,
    address indexed proxy,
    address indexed implementation
  );

  /**
   * @dev Emitted when the debt ceiling of an asset is set.
   * @param asset The address of the underlying asset of the reserve
   * @param oldDebtCeiling The old debt ceiling
   * @param newDebtCeiling The new debt ceiling
   */
  event DebtCeilingChanged(address indexed asset, uint256 oldDebtCeiling, uint256 newDebtCeiling);

  /**
   * @dev Emitted when the the siloed borrowing state for an asset is changed.
   * @param asset The address of the underlying asset of the reserve
   * @param oldState The old siloed borrowing state
   * @param newState The new siloed borrowing state
   */
  event SiloedBorrowingChanged(address indexed asset, bool oldState, bool newState);

  /**
   * @dev Emitted when the bridge protocol fee is updated.
   * @param oldBridgeProtocolFee The old protocol fee, expressed in bps
   * @param newBridgeProtocolFee The new protocol fee, expressed in bps
   */
  event BridgeProtocolFeeUpdated(uint256 oldBridgeProtocolFee, uint256 newBridgeProtocolFee);

  /**
   * @dev Emitted when the total premium on flashloans is updated.
   * @param oldFlashloanPremiumTotal The old premium, expressed in bps
   * @param newFlashloanPremiumTotal The new premium, expressed in bps
   */
  event FlashloanPremiumTotalUpdated(
    uint128 oldFlashloanPremiumTotal,
    uint128 newFlashloanPremiumTotal
  );

  /**
   * @dev Emitted when the part of the premium that goes to protocol is updated.
   * @param oldFlashloanPremiumToProtocol The old premium, expressed in bps
   * @param newFlashloanPremiumToProtocol The new premium, expressed in bps
   */
  event FlashloanPremiumToProtocolUpdated(
    uint128 oldFlashloanPremiumToProtocol,
    uint128 newFlashloanPremiumToProtocol
  );

  /**
   * @dev Emitted when the reserve is set as borrowable/non borrowable in isolation mode.
   * @param asset The address of the underlying asset of the reserve
   * @param borrowable True if the reserve is borrowable in isolation, false otherwise
   */
  event BorrowableInIsolationChanged(address asset, bool borrowable);

  /**
   * @notice Initializes multiple reserves.
   * @dev param useVirtualBalance of the input struct should be true for all normal assets and should be false
   *  only in special cases (ex. GHO) where an asset is minted instead of supplied.
   * @param input The array of initialization parameters
   */
  function initReserves(ConfiguratorInputTypes.InitReserveInput[] calldata input) external;

  /**
   * @dev Updates the aToken implementation for the reserve.
   * @param input The aToken update parameters
   */
  function updateAToken(ConfiguratorInputTypes.UpdateATokenInput calldata input) external;

  /**
   * @notice Updates the stable debt token implementation for the reserve.
   * @param input The stableDebtToken update parameters
   */
  function updateStableDebtToken(
    ConfiguratorInputTypes.UpdateDebtTokenInput calldata input
  ) external;

  /**
   * @notice Updates the variable debt token implementation for the asset.
   * @param input The variableDebtToken update parameters
   */
  function updateVariableDebtToken(
    ConfiguratorInputTypes.UpdateDebtTokenInput calldata input
  ) external;

  /**
   * @notice Configures borrowing on a reserve.
   * @dev Can only be disabled (set to false) if stable borrowing is disabled
   * @param asset The address of the underlying asset of the reserve
   * @param enabled True if borrowing needs to be enabled, false otherwise
   */
  function setReserveBorrowing(address asset, bool enabled) external;

  /**
   * @notice Configures the reserve collateralization parameters.
   * @dev All the values are expressed in bps. A value of 10000, results in 100.00%
   * @dev The `liquidationBonus` is always above 100%. A value of 105% means the liquidator will receive a 5% bonus
   * @param asset The address of the underlying asset of the reserve
   * @param ltv The loan to value of the asset when used as collateral
   * @param liquidationThreshold The threshold at which loans using this asset as collateral will be considered undercollateralized
   * @param liquidationBonus The bonus liquidators receive to liquidate this asset
   */
  function configureReserveAsCollateral(
    address asset,
    uint256 ltv,
    uint256 liquidationThreshold,
    uint256 liquidationBonus
  ) external;

  /**
   * @notice Enable or disable stable rate borrowing on a reserve.
   * @dev Can only be enabled (set to true) if borrowing is enabled
   * @param asset The address of the underlying asset of the reserve
   * @param enabled True if stable rate borrowing needs to be enabled, false otherwise
   */
  function setReserveStableRateBorrowing(address asset, bool enabled) external;

  /**
   * @notice Enable or disable flashloans on a reserve
   * @param asset The address of the underlying asset of the reserve
   * @param enabled True if flashloans need to be enabled, false otherwise
   */
  function setReserveFlashLoaning(address asset, bool enabled) external;

  /**
   * @notice Activate or deactivate a reserve
   * @param asset The address of the underlying asset of the reserve
   * @param active True if the reserve needs to be active, false otherwise
   */
  function setReserveActive(address asset, bool active) external;

  /**
   * @notice Freeze or unfreeze a reserve. A frozen reserve doesn't allow any new supply, borrow
   * or rate swap but allows repayments, liquidations, rate rebalances and withdrawals.
   * @param asset The address of the underlying asset of the reserve
   * @param freeze True if the reserve needs to be frozen, false otherwise
   */
  function setReserveFreeze(address asset, bool freeze) external;

  /**
   * @notice Sets the borrowable in isolation flag for the reserve.
   * @dev When this flag is set to true, the asset will be borrowable against isolated collaterals and the
   * borrowed amount will be accumulated in the isolated collateral's total debt exposure
   * @dev Only assets of the same family (e.g. USD stablecoins) should be borrowable in isolation mode to keep
   * consistency in the debt ceiling calculations
   * @param asset The address of the underlying asset of the reserve
   * @param borrowable True if the asset should be borrowable in isolation, false otherwise
   */
  function setBorrowableInIsolation(address asset, bool borrowable) external;

  /**
   * @notice Pauses a reserve. A paused reserve does not allow any interaction (supply, borrow, repay,
   * swap interest rate, liquidate, atoken transfers).
   * @param asset The address of the underlying asset of the reserve
   * @param paused True if pausing the reserve, false if unpausing
   * @param gracePeriod Count of seconds after unpause during which liquidations will not be available
   *   - Only applicable whenever unpausing (`paused` as false)
   *   - Passing 0 means no grace period
   *   - Capped to maximum MAX_GRACE_PERIOD
   */
  function setReservePause(address asset, bool paused, uint40 gracePeriod) external;

  /**
   * @notice Pauses a reserve. A paused reserve does not allow any interaction (supply, borrow, repay,
   * swap interest rate, liquidate, atoken transfers).
   * @dev Version with no grace period
   * @param asset The address of the underlying asset of the reserve
   * @param paused True if pausing the reserve, false if unpausing
   */
  function setReservePause(address asset, bool paused) external;

  /**
   * @notice Disables liquidation grace period for the asset. The liquidation grace period is set in the past
   * so that liquidations are allowed for the asset.
   * @param asset The address of the underlying asset of the reserve
   */
  function disableLiquidationGracePeriod(address asset) external;

  /**
   * @notice Updates the reserve factor of a reserve.
   * @param asset The address of the underlying asset of the reserve
   * @param newReserveFactor The new reserve factor of the reserve
   */
  function setReserveFactor(address asset, uint256 newReserveFactor) external;

  /**
   * @notice Sets the interest rate strategy of a reserve.
   * @param asset The address of the underlying asset of the reserve
   * @param newRateStrategyAddress The address of the new interest strategy contract
   * @param rateData bytes-encoded rate data. In this format in order to allow the rate strategy contract
   *  to de-structure custom data
   */
  function setReserveInterestRateStrategyAddress(
    address asset,
    address newRateStrategyAddress,
    bytes calldata rateData
  ) external;

  /**
   * @notice Sets interest rate data for a reserve
   * @param asset The address of the underlying asset of the reserve
   * @param rateData bytes-encoded rate data. In this format in order to allow the rate strategy contract
   *  to de-structure custom data
   */
  function setReserveInterestRateData(address asset, bytes calldata rateData) external;

  /**
   * @notice Pauses or unpauses all the protocol reserves. In the paused state all the protocol interactions
   * are suspended.
   * @param paused True if protocol needs to be paused, false otherwise
   * @param gracePeriod Count of seconds after unpause during which liquidations will not be available
   *   - Only applicable whenever unpausing (`paused` as false)
   *   - Passing 0 means no grace period
   *   - Capped to maximum MAX_GRACE_PERIOD
   */
  function setPoolPause(bool paused, uint40 gracePeriod) external;

  /**
   * @notice Pauses or unpauses all the protocol reserves. In the paused state all the protocol interactions
   * are suspended.
   * @dev Version with no grace period
   * @param paused True if protocol needs to be paused, false otherwise
   */
  function setPoolPause(bool paused) external;

  /**
   * @notice Updates the borrow cap of a reserve.
   * @param asset The address of the underlying asset of the reserve
   * @param newBorrowCap The new borrow cap of the reserve
   */
  function setBorrowCap(address asset, uint256 newBorrowCap) external;

  /**
   * @notice Updates the supply cap of a reserve.
   * @param asset The address of the underlying asset of the reserve
   * @param newSupplyCap The new supply cap of the reserve
   */
  function setSupplyCap(address asset, uint256 newSupplyCap) external;

  /**
   * @notice Updates the liquidation protocol fee of reserve.
   * @param asset The address of the underlying asset of the reserve
   * @param newFee The new liquidation protocol fee of the reserve, expressed in bps
   */
  function setLiquidationProtocolFee(address asset, uint256 newFee) external;

  /**
   * @notice Updates the unbacked mint cap of reserve.
   * @param asset The address of the underlying asset of the reserve
   * @param newUnbackedMintCap The new unbacked mint cap of the reserve
   */
  function setUnbackedMintCap(address asset, uint256 newUnbackedMintCap) external;

  /**
   * @notice Assign an efficiency mode (eMode) category to asset.
   * @param asset The address of the underlying asset of the reserve
   * @param newCategoryId The new category id of the asset
   */
  function setAssetEModeCategory(address asset, uint8 newCategoryId) external;

  /**
   * @notice Adds a new efficiency mode (eMode) category.
   * @dev If zero is provided as oracle address, the default asset oracles will be used to compute the overall debt and
   * overcollateralization of the users using this category.
   * @dev The new ltv and liquidation threshold must be greater than the base
   * ltvs and liquidation thresholds of all assets within the eMode category
   * @param categoryId The id of the category to be configured
   * @param ltv The ltv associated with the category
   * @param liquidationThreshold The liquidation threshold associated with the category
   * @param liquidationBonus The liquidation bonus associated with the category
   * @param oracle The oracle associated with the category
   * @param label A label identifying the category
   */
  function setEModeCategory(
    uint8 categoryId,
    uint16 ltv,
    uint16 liquidationThreshold,
    uint16 liquidationBonus,
    address oracle,
    string calldata label
  ) external;

  /**
   * @notice Drops a reserve entirely.
   * @param asset The address of the reserve to drop
   */
  function dropReserve(address asset) external;

  /**
   * @notice Updates the bridge fee collected by the protocol reserves.
   * @param newBridgeProtocolFee The part of the fee sent to the protocol treasury, expressed in bps
   */
  function updateBridgeProtocolFee(uint256 newBridgeProtocolFee) external;

  /**
   * @notice Updates the total flash loan premium.
   * Total flash loan premium consists of two parts:
   * - A part is sent to aToken holders as extra balance
   * - A part is collected by the protocol reserves
   * @dev Expressed in bps
   * @dev The premium is calculated on the total amount borrowed
   * @param newFlashloanPremiumTotal The total flashloan premium
   */
  function updateFlashloanPremiumTotal(uint128 newFlashloanPremiumTotal) external;

  /**
   * @notice Updates the flash loan premium collected by protocol reserves
   * @dev Expressed in bps
   * @dev The premium to protocol is calculated on the total flashloan premium
   * @param newFlashloanPremiumToProtocol The part of the flashloan premium sent to the protocol treasury
   */
  function updateFlashloanPremiumToProtocol(uint128 newFlashloanPremiumToProtocol) external;

  /**
   * @notice Sets the debt ceiling for an asset.
   * @param newDebtCeiling The new debt ceiling
   */
  function setDebtCeiling(address asset, uint256 newDebtCeiling) external;

  /**
   * @notice Sets siloed borrowing for an asset
   * @param siloed The new siloed borrowing state
   */
  function setSiloedBorrowing(address asset, bool siloed) external;

  /**
   * @notice Gets pending ltv value
   * @param asset The new siloed borrowing state
   */
  function getPendingLtv(address asset) external view returns (uint256);

  /**
   * @notice Gets the address of the external ConfiguratorLogic
   */
  function getConfiguratorLogic() external view returns (address);

  /**
   * @notice Gets the maximum liquidations grace period allowed, in seconds
   */
  function MAX_GRACE_PERIOD() external view returns (uint40);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {IPoolAddressesProvider} from './IPoolAddressesProvider.sol';

/**
 * @title IPoolDataProvider
 * @author Aave
 * @notice Defines the basic interface of a PoolDataProvider
 */
interface IPoolDataProvider {
  struct TokenData {
    string symbol;
    address tokenAddress;
  }

  /**
   * @notice Returns the address for the PoolAddressesProvider contract.
   * @return The address for the PoolAddressesProvider contract
   */
  function ADDRESSES_PROVIDER() external view returns (IPoolAddressesProvider);

  /**
   * @notice Returns the list of the existing reserves in the pool.
   * @dev Handling MKR and ETH in a different way since they do not have standard `symbol` functions.
   * @return The list of reserves, pairs of symbols and addresses
   */
  function getAllReservesTokens() external view returns (TokenData[] memory);

  /**
   * @notice Returns the list of the existing ATokens in the pool.
   * @return The list of ATokens, pairs of symbols and addresses
   */
  function getAllATokens() external view returns (TokenData[] memory);

  /**
   * @notice Returns the configuration data of the reserve
   * @dev Not returning borrow and supply caps for compatibility, nor pause flag
   * @param asset The address of the underlying asset of the reserve
   * @return decimals The number of decimals of the reserve
   * @return ltv The ltv of the reserve
   * @return liquidationThreshold The liquidationThreshold of the reserve
   * @return liquidationBonus The liquidationBonus of the reserve
   * @return reserveFactor The reserveFactor of the reserve
   * @return usageAsCollateralEnabled True if the usage as collateral is enabled, false otherwise
   * @return borrowingEnabled True if borrowing is enabled, false otherwise
   * @return stableBorrowRateEnabled True if stable rate borrowing is enabled, false otherwise
   * @return isActive True if it is active, false otherwise
   * @return isFrozen True if it is frozen, false otherwise
   */
  function getReserveConfigurationData(
    address asset
  )
    external
    view
    returns (
      uint256 decimals,
      uint256 ltv,
      uint256 liquidationThreshold,
      uint256 liquidationBonus,
      uint256 reserveFactor,
      bool usageAsCollateralEnabled,
      bool borrowingEnabled,
      bool stableBorrowRateEnabled,
      bool isActive,
      bool isFrozen
    );

  /**
   * @notice Returns the efficiency mode category of the reserve
   * @param asset The address of the underlying asset of the reserve
   * @return The eMode id of the reserve
   */
  function getReserveEModeCategory(address asset) external view returns (uint256);

  /**
   * @notice Returns the caps parameters of the reserve
   * @param asset The address of the underlying asset of the reserve
   * @return borrowCap The borrow cap of the reserve
   * @return supplyCap The supply cap of the reserve
   */
  function getReserveCaps(
    address asset
  ) external view returns (uint256 borrowCap, uint256 supplyCap);

  /**
   * @notice Returns if the pool is paused
   * @param asset The address of the underlying asset of the reserve
   * @return isPaused True if the pool is paused, false otherwise
   */
  function getPaused(address asset) external view returns (bool isPaused);

  /**
   * @notice Returns the siloed borrowing flag
   * @param asset The address of the underlying asset of the reserve
   * @return True if the asset is siloed for borrowing
   */
  function getSiloedBorrowing(address asset) external view returns (bool);

  /**
   * @notice Returns the protocol fee on the liquidation bonus
   * @param asset The address of the underlying asset of the reserve
   * @return The protocol fee on liquidation
   */
  function getLiquidationProtocolFee(address asset) external view returns (uint256);

  /**
   * @notice Returns the unbacked mint cap of the reserve
   * @param asset The address of the underlying asset of the reserve
   * @return The unbacked mint cap of the reserve
   */
  function getUnbackedMintCap(address asset) external view returns (uint256);

  /**
   * @notice Returns the debt ceiling of the reserve
   * @param asset The address of the underlying asset of the reserve
   * @return The debt ceiling of the reserve
   */
  function getDebtCeiling(address asset) external view returns (uint256);

  /**
   * @notice Returns the debt ceiling decimals
   * @return The debt ceiling decimals
   */
  function getDebtCeilingDecimals() external pure returns (uint256);

  /**
   * @notice Returns the reserve data
   * @param asset The address of the underlying asset of the reserve
   * @return unbacked The amount of unbacked tokens
   * @return accruedToTreasuryScaled The scaled amount of tokens accrued to treasury that is to be minted
   * @return totalAToken The total supply of the aToken
   * @return totalStableDebt The total stable debt of the reserve
   * @return totalVariableDebt The total variable debt of the reserve
   * @return liquidityRate The liquidity rate of the reserve
   * @return variableBorrowRate The variable borrow rate of the reserve
   * @return stableBorrowRate The stable borrow rate of the reserve
   * @return averageStableBorrowRate The average stable borrow rate of the reserve
   * @return liquidityIndex The liquidity index of the reserve
   * @return variableBorrowIndex The variable borrow index of the reserve
   * @return lastUpdateTimestamp The timestamp of the last update of the reserve
   */
  function getReserveData(
    address asset
  )
    external
    view
    returns (
      uint256 unbacked,
      uint256 accruedToTreasuryScaled,
      uint256 totalAToken,
      uint256 totalStableDebt,
      uint256 totalVariableDebt,
      uint256 liquidityRate,
      uint256 variableBorrowRate,
      uint256 stableBorrowRate,
      uint256 averageStableBorrowRate,
      uint256 liquidityIndex,
      uint256 variableBorrowIndex,
      uint40 lastUpdateTimestamp
    );

  /**
   * @notice Returns the total supply of aTokens for a given asset
   * @param asset The address of the underlying asset of the reserve
   * @return The total supply of the aToken
   */
  function getATokenTotalSupply(address asset) external view returns (uint256);

  /**
   * @notice Returns the total debt for a given asset
   * @param asset The address of the underlying asset of the reserve
   * @return The total debt for asset
   */
  function getTotalDebt(address asset) external view returns (uint256);

  /**
   * @notice Returns the user data in a reserve
   * @param asset The address of the underlying asset of the reserve
   * @param user The address of the user
   * @return currentATokenBalance The current AToken balance of the user
   * @return currentStableDebt The current stable debt of the user
   * @return currentVariableDebt The current variable debt of the user
   * @return principalStableDebt The principal stable debt of the user
   * @return scaledVariableDebt The scaled variable debt of the user
   * @return stableBorrowRate The stable borrow rate of the user
   * @return liquidityRate The liquidity rate of the reserve
   * @return stableRateLastUpdated The timestamp of the last update of the user stable rate
   * @return usageAsCollateralEnabled True if the user is using the asset as collateral, false
   *         otherwise
   */
  function getUserReserveData(
    address asset,
    address user
  )
    external
    view
    returns (
      uint256 currentATokenBalance,
      uint256 currentStableDebt,
      uint256 currentVariableDebt,
      uint256 principalStableDebt,
      uint256 scaledVariableDebt,
      uint256 stableBorrowRate,
      uint256 liquidityRate,
      uint40 stableRateLastUpdated,
      bool usageAsCollateralEnabled
    );

  /**
   * @notice Returns the token addresses of the reserve
   * @param asset The address of the underlying asset of the reserve
   * @return aTokenAddress The AToken address of the reserve
   * @return stableDebtTokenAddress The StableDebtToken address of the reserve
   * @return variableDebtTokenAddress The VariableDebtToken address of the reserve
   */
  function getReserveTokensAddresses(
    address asset
  )
    external
    view
    returns (
      address aTokenAddress,
      address stableDebtTokenAddress,
      address variableDebtTokenAddress
    );

  /**
   * @notice Returns the address of the Interest Rate strategy
   * @param asset The address of the underlying asset of the reserve
   * @return irStrategyAddress The address of the Interest Rate strategy
   */
  function getInterestRateStrategyAddress(
    address asset
  ) external view returns (address irStrategyAddress);

  /**
   * @notice Returns whether the reserve has FlashLoans enabled or disabled
   * @param asset The address of the underlying asset of the reserve
   * @return True if FlashLoans are enabled, false otherwise
   */
  function getFlashLoanEnabled(address asset) external view returns (bool);

  /**
   * @notice Returns whether virtual accounting is enabled/not for a reserve
   * @param asset The address of the underlying asset of the reserve
   * @return True if active, false otherwise
   */
  function getIsVirtualAccActive(address asset) external view returns (bool);

  /**
   * @notice Returns the virtual underlying balance of the reserve
   * @param asset The address of the underlying asset of the reserve
   * @return The reserve virtual underlying balance
   */
  function getVirtualUnderlyingBalance(address asset) external view returns (uint256);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

/**
 * @title IPriceOracleGetter
 * @author Aave
 * @notice Interface for the Aave price oracle.
 */
interface IPriceOracleGetter {
  /**
   * @notice Returns the base currency address
   * @dev Address 0x0 is reserved for USD as base currency.
   * @return Returns the base currency address.
   */
  function BASE_CURRENCY() external view returns (address);

  /**
   * @notice Returns the base currency unit
   * @dev 1 ether for ETH, 1e8 for USD.
   * @return Returns the base currency unit.
   */
  function BASE_CURRENCY_UNIT() external view returns (uint256);

  /**
   * @notice Returns the asset price in the base currency
   * @param asset The address of the asset
   * @return The price of the asset
   */
  function getAssetPrice(address asset) external view returns (uint256);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {DataTypes} from '../protocol/libraries/types/DataTypes.sol';

/**
 * @title IReserveInterestRateStrategy
 * @author BGD Labs
 * @notice Basic interface for any rate strategy used by the Aave protocol
 */
interface IReserveInterestRateStrategy {
  /**
   * @notice Sets interest rate data for an Aave rate strategy
   * @param reserve The reserve to update
   * @param rateData The abi encoded reserve interest rate data to apply to the given reserve
   *   Abstracted this way as rate strategies can be custom
   */
  function setInterestRateParams(address reserve, bytes calldata rateData) external;

  /**
   * @notice Calculates the interest rates depending on the reserve's state and configurations
   * @param params The parameters needed to calculate interest rates
   * @return liquidityRate The liquidity rate expressed in ray
   * @return stableBorrowRate The stable borrow rate expressed in ray
   * @return variableBorrowRate The variable borrow rate expressed in ray
   */
  function calculateInterestRates(
    DataTypes.CalculateInterestRatesParams memory params
  ) external view returns (uint256, uint256, uint256);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

/**
 * @title IScaledBalanceToken
 * @author Aave
 * @notice Defines the basic interface for a scaled-balance token.
 */
interface IScaledBalanceToken {
  /**
   * @dev Emitted after the mint action
   * @param caller The address performing the mint
   * @param onBehalfOf The address of the user that will receive the minted tokens
   * @param value The scaled-up amount being minted (based on user entered amount and balance increase from interest)
   * @param balanceIncrease The increase in scaled-up balance since the last action of 'onBehalfOf'
   * @param index The next liquidity index of the reserve
   */
  event Mint(
    address indexed caller,
    address indexed onBehalfOf,
    uint256 value,
    uint256 balanceIncrease,
    uint256 index
  );

  /**
   * @dev Emitted after the burn action
   * @dev If the burn function does not involve a transfer of the underlying asset, the target defaults to zero address
   * @param from The address from which the tokens will be burned
   * @param target The address that will receive the underlying, if any
   * @param value The scaled-up amount being burned (user entered amount - balance increase from interest)
   * @param balanceIncrease The increase in scaled-up balance since the last action of 'from'
   * @param index The next liquidity index of the reserve
   */
  event Burn(
    address indexed from,
    address indexed target,
    uint256 value,
    uint256 balanceIncrease,
    uint256 index
  );

  /**
   * @notice Returns the scaled balance of the user.
   * @dev The scaled balance is the sum of all the updated stored balance divided by the reserve's liquidity index
   * at the moment of the update
   * @param user The user whose balance is calculated
   * @return The scaled balance of the user
   */
  function scaledBalanceOf(address user) external view returns (uint256);

  /**
   * @notice Returns the scaled balance of the user and the scaled total supply.
   * @param user The address of the user
   * @return The scaled balance of the user
   * @return The scaled total supply
   */
  function getScaledUserBalanceAndSupply(address user) external view returns (uint256, uint256);

  /**
   * @notice Returns the scaled total supply of the scaled balance token. Represents sum(debt/index)
   * @return The scaled total supply
   */
  function scaledTotalSupply() external view returns (uint256);

  /**
   * @notice Returns last index interest was accrued to the user's balance
   * @param user The address of the user
   * @return The last index interest was accrued to the user's balance, expressed in ray
   */
  function getPreviousIndex(address user) external view returns (uint256);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

/**
 * @title Errors library
 * @author Aave
 * @notice Defines the error messages emitted by the different contracts of the Aave protocol
 */
library Errors {
  string public constant CALLER_NOT_POOL_ADMIN = '1'; // 'The caller of the function is not a pool admin'
  string public constant CALLER_NOT_EMERGENCY_ADMIN = '2'; // 'The caller of the function is not an emergency admin'
  string public constant CALLER_NOT_POOL_OR_EMERGENCY_ADMIN = '3'; // 'The caller of the function is not a pool or emergency admin'
  string public constant CALLER_NOT_RISK_OR_POOL_ADMIN = '4'; // 'The caller of the function is not a risk or pool admin'
  string public constant CALLER_NOT_ASSET_LISTING_OR_POOL_ADMIN = '5'; // 'The caller of the function is not an asset listing or pool admin'
  string public constant CALLER_NOT_BRIDGE = '6'; // 'The caller of the function is not a bridge'
  string public constant ADDRESSES_PROVIDER_NOT_REGISTERED = '7'; // 'Pool addresses provider is not registered'
  string public constant INVALID_ADDRESSES_PROVIDER_ID = '8'; // 'Invalid id for the pool addresses provider'
  string public constant NOT_CONTRACT = '9'; // 'Address is not a contract'
  string public constant CALLER_NOT_POOL_CONFIGURATOR = '10'; // 'The caller of the function is not the pool configurator'
  string public constant CALLER_NOT_ATOKEN = '11'; // 'The caller of the function is not an AToken'
  string public constant INVALID_ADDRESSES_PROVIDER = '12'; // 'The address of the pool addresses provider is invalid'
  string public constant INVALID_FLASHLOAN_EXECUTOR_RETURN = '13'; // 'Invalid return value of the flashloan executor function'
  string public constant RESERVE_ALREADY_ADDED = '14'; // 'Reserve has already been added to reserve list'
  string public constant NO_MORE_RESERVES_ALLOWED = '15'; // 'Maximum amount of reserves in the pool reached'
  string public constant EMODE_CATEGORY_RESERVED = '16'; // 'Zero eMode category is reserved for volatile heterogeneous assets'
  string public constant INVALID_EMODE_CATEGORY_ASSIGNMENT = '17'; // 'Invalid eMode category assignment to asset'
  string public constant RESERVE_LIQUIDITY_NOT_ZERO = '18'; // 'The liquidity of the reserve needs to be 0'
  string public constant FLASHLOAN_PREMIUM_INVALID = '19'; // 'Invalid flashloan premium'
  string public constant INVALID_RESERVE_PARAMS = '20'; // 'Invalid risk parameters for the reserve'
  string public constant INVALID_EMODE_CATEGORY_PARAMS = '21'; // 'Invalid risk parameters for the eMode category'
  string public constant BRIDGE_PROTOCOL_FEE_INVALID = '22'; // 'Invalid bridge protocol fee'
  string public constant CALLER_MUST_BE_POOL = '23'; // 'The caller of this function must be a pool'
  string public constant INVALID_MINT_AMOUNT = '24'; // 'Invalid amount to mint'
  string public constant INVALID_BURN_AMOUNT = '25'; // 'Invalid amount to burn'
  string public constant INVALID_AMOUNT = '26'; // 'Amount must be greater than 0'
  string public constant RESERVE_INACTIVE = '27'; // 'Action requires an active reserve'
  string public constant RESERVE_FROZEN = '28'; // 'Action cannot be performed because the reserve is frozen'
  string public constant RESERVE_PAUSED = '29'; // 'Action cannot be performed because the reserve is paused'
  string public constant BORROWING_NOT_ENABLED = '30'; // 'Borrowing is not enabled'
  string public constant STABLE_BORROWING_NOT_ENABLED = '31'; // 'Stable borrowing is not enabled'
  string public constant NOT_ENOUGH_AVAILABLE_USER_BALANCE = '32'; // 'User cannot withdraw more than the available balance'
  string public constant INVALID_INTEREST_RATE_MODE_SELECTED = '33'; // 'Invalid interest rate mode selected'
  string public constant COLLATERAL_BALANCE_IS_ZERO = '34'; // 'The collateral balance is 0'
  string public constant HEALTH_FACTOR_LOWER_THAN_LIQUIDATION_THRESHOLD = '35'; // 'Health factor is lesser than the liquidation threshold'
  string public constant COLLATERAL_CANNOT_COVER_NEW_BORROW = '36'; // 'There is not enough collateral to cover a new borrow'
  string public constant COLLATERAL_SAME_AS_BORROWING_CURRENCY = '37'; // 'Collateral is (mostly) the same currency that is being borrowed'
  string public constant AMOUNT_BIGGER_THAN_MAX_LOAN_SIZE_STABLE = '38'; // 'The requested amount is greater than the max loan size in stable rate mode'
  string public constant NO_DEBT_OF_SELECTED_TYPE = '39'; // 'For repayment of a specific type of debt, the user needs to have debt that type'
  string public constant NO_EXPLICIT_AMOUNT_TO_REPAY_ON_BEHALF = '40'; // 'To repay on behalf of a user an explicit amount to repay is needed'
  string public constant NO_OUTSTANDING_STABLE_DEBT = '41'; // 'User does not have outstanding stable rate debt on this reserve'
  string public constant NO_OUTSTANDING_VARIABLE_DEBT = '42'; // 'User does not have outstanding variable rate debt on this reserve'
  string public constant UNDERLYING_BALANCE_ZERO = '43'; // 'The underlying balance needs to be greater than 0'
  string public constant INTEREST_RATE_REBALANCE_CONDITIONS_NOT_MET = '44'; // 'Interest rate rebalance conditions were not met'
  string public constant HEALTH_FACTOR_NOT_BELOW_THRESHOLD = '45'; // 'Health factor is not below the threshold'
  string public constant COLLATERAL_CANNOT_BE_LIQUIDATED = '46'; // 'The collateral chosen cannot be liquidated'
  string public constant SPECIFIED_CURRENCY_NOT_BORROWED_BY_USER = '47'; // 'User did not borrow the specified currency'
  string public constant INCONSISTENT_FLASHLOAN_PARAMS = '49'; // 'Inconsistent flashloan parameters'
  string public constant BORROW_CAP_EXCEEDED = '50'; // 'Borrow cap is exceeded'
  string public constant SUPPLY_CAP_EXCEEDED = '51'; // 'Supply cap is exceeded'
  string public constant UNBACKED_MINT_CAP_EXCEEDED = '52'; // 'Unbacked mint cap is exceeded'
  string public constant DEBT_CEILING_EXCEEDED = '53'; // 'Debt ceiling is exceeded'
  string public constant UNDERLYING_CLAIMABLE_RIGHTS_NOT_ZERO = '54'; // 'Claimable rights over underlying not zero (aToken supply or accruedToTreasury)'
  string public constant STABLE_DEBT_NOT_ZERO = '55'; // 'Stable debt supply is not zero'
  string public constant VARIABLE_DEBT_SUPPLY_NOT_ZERO = '56'; // 'Variable debt supply is not zero'
  string public constant LTV_VALIDATION_FAILED = '57'; // 'Ltv validation failed'
  string public constant INCONSISTENT_EMODE_CATEGORY = '58'; // 'Inconsistent eMode category'
  string public constant PRICE_ORACLE_SENTINEL_CHECK_FAILED = '59'; // 'Price oracle sentinel validation failed'
  string public constant ASSET_NOT_BORROWABLE_IN_ISOLATION = '60'; // 'Asset is not borrowable in isolation mode'
  string public constant RESERVE_ALREADY_INITIALIZED = '61'; // 'Reserve has already been initialized'
  string public constant USER_IN_ISOLATION_MODE_OR_LTV_ZERO = '62'; // 'User is in isolation mode or ltv is zero'
  string public constant INVALID_LTV = '63'; // 'Invalid ltv parameter for the reserve'
  string public constant INVALID_LIQ_THRESHOLD = '64'; // 'Invalid liquidity threshold parameter for the reserve'
  string public constant INVALID_LIQ_BONUS = '65'; // 'Invalid liquidity bonus parameter for the reserve'
  string public constant INVALID_DECIMALS = '66'; // 'Invalid decimals parameter of the underlying asset of the reserve'
  string public constant INVALID_RESERVE_FACTOR = '67'; // 'Invalid reserve factor parameter for the reserve'
  string public constant INVALID_BORROW_CAP = '68'; // 'Invalid borrow cap for the reserve'
  string public constant INVALID_SUPPLY_CAP = '69'; // 'Invalid supply cap for the reserve'
  string public constant INVALID_LIQUIDATION_PROTOCOL_FEE = '70'; // 'Invalid liquidation protocol fee for the reserve'
  string public constant INVALID_EMODE_CATEGORY = '71'; // 'Invalid eMode category for the reserve'
  string public constant INVALID_UNBACKED_MINT_CAP = '72'; // 'Invalid unbacked mint cap for the reserve'
  string public constant INVALID_DEBT_CEILING = '73'; // 'Invalid debt ceiling for the reserve
  string public constant INVALID_RESERVE_INDEX = '74'; // 'Invalid reserve index'
  string public constant ACL_ADMIN_CANNOT_BE_ZERO = '75'; // 'ACL admin cannot be set to the zero address'
  string public constant INCONSISTENT_PARAMS_LENGTH = '76'; // 'Array parameters that should be equal length are not'
  string public constant ZERO_ADDRESS_NOT_VALID = '77'; // 'Zero address not valid'
  string public constant INVALID_EXPIRATION = '78'; // 'Invalid expiration'
  string public constant INVALID_SIGNATURE = '79'; // 'Invalid signature'
  string public constant OPERATION_NOT_SUPPORTED = '80'; // 'Operation not supported'
  string public constant DEBT_CEILING_NOT_ZERO = '81'; // 'Debt ceiling is not zero'
  string public constant ASSET_NOT_LISTED = '82'; // 'Asset is not listed'
  string public constant INVALID_OPTIMAL_USAGE_RATIO = '83'; // 'Invalid optimal usage ratio'
  string public constant INVALID_OPTIMAL_STABLE_TO_TOTAL_DEBT_RATIO = '84'; // 'Invalid optimal stable to total debt ratio'
  string public constant UNDERLYING_CANNOT_BE_RESCUED = '85'; // 'The underlying asset cannot be rescued'
  string public constant ADDRESSES_PROVIDER_ALREADY_ADDED = '86'; // 'Reserve has already been added to reserve list'
  string public constant POOL_ADDRESSES_DO_NOT_MATCH = '87'; // 'The token implementation pool address and the pool address provided by the initializing pool do not match'
  string public constant STABLE_BORROWING_ENABLED = '88'; // 'Stable borrowing is enabled'
  string public constant SILOED_BORROWING_VIOLATION = '89'; // 'User is trying to borrow multiple assets including a siloed one'
  string public constant RESERVE_DEBT_NOT_ZERO = '90'; // the total debt of the reserve needs to be 0
  string public constant FLASHLOAN_DISABLED = '91'; // FlashLoaning for this asset is disabled
  string public constant INVALID_MAX_RATE = '92'; // The expect maximum borrow rate is invalid
  string public constant WITHDRAW_TO_ATOKEN = '93'; // Withdrawing to the aToken is not allowed
  string public constant SUPPLY_TO_ATOKEN = '94'; // Supplying to the aToken is not allowed
  string public constant SLOPE_2_MUST_BE_GTE_SLOPE_1 = '95'; // Variable interest rate slope 2 can not be lower than slope 1
  string public constant CALLER_NOT_RISK_OR_POOL_OR_EMERGENCY_ADMIN = '96'; // 'The caller of the function is not a risk, pool or emergency admin'
  string public constant LIQUIDATION_GRACE_SENTINEL_CHECK_FAILED = '97'; // 'Liquidation grace sentinel validation failed'
  string public constant INVALID_GRACE_PERIOD = '98'; // Grace period above a valid range
  string public constant INVALID_FREEZE_STATE = '99'; // Reserve is already in the passed freeze state
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

library ConfiguratorInputTypes {
  struct InitReserveInput {
    address aTokenImpl;
    address stableDebtTokenImpl;
    address variableDebtTokenImpl;
    bool useVirtualBalance;
    address interestRateStrategyAddress;
    address underlyingAsset;
    address treasury;
    address incentivesController;
    string aTokenName;
    string aTokenSymbol;
    string variableDebtTokenName;
    string variableDebtTokenSymbol;
    string stableDebtTokenName;
    string stableDebtTokenSymbol;
    bytes params;
    bytes interestRateData;
  }

  struct UpdateATokenInput {
    address asset;
    address treasury;
    address incentivesController;
    string name;
    string symbol;
    address implementation;
    bytes params;
  }

  struct UpdateDebtTokenInput {
    address asset;
    address incentivesController;
    string name;
    string symbol;
    address implementation;
    bytes params;
  }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

library DataTypes {
  /**
   * This exists specifically to maintain the `getReserveData()` interface, since the new, internal
   * `ReserveData` struct includes the reserve's `virtualUnderlyingBalance`.
   */
  struct ReserveDataLegacy {
    //stores the reserve configuration
    ReserveConfigurationMap configuration;
    //the liquidity index. Expressed in ray
    uint128 liquidityIndex;
    //the current supply rate. Expressed in ray
    uint128 currentLiquidityRate;
    //variable borrow index. Expressed in ray
    uint128 variableBorrowIndex;
    //the current variable borrow rate. Expressed in ray
    uint128 currentVariableBorrowRate;
    //the current stable borrow rate. Expressed in ray
    uint128 currentStableBorrowRate;
    //timestamp of last update
    uint40 lastUpdateTimestamp;
    //the id of the reserve. Represents the position in the list of the active reserves
    uint16 id;
    //aToken address
    address aTokenAddress;
    //stableDebtToken address
    address stableDebtTokenAddress;
    //variableDebtToken address
    address variableDebtTokenAddress;
    //address of the interest rate strategy
    address interestRateStrategyAddress;
    //the current treasury balance, scaled
    uint128 accruedToTreasury;
    //the outstanding unbacked aTokens minted through the bridging feature
    uint128 unbacked;
    //the outstanding debt borrowed against this asset in isolation mode
    uint128 isolationModeTotalDebt;
  }

  struct ReserveData {
    //stores the reserve configuration
    ReserveConfigurationMap configuration;
    //the liquidity index. Expressed in ray
    uint128 liquidityIndex;
    //the current supply rate. Expressed in ray
    uint128 currentLiquidityRate;
    //variable borrow index. Expressed in ray
    uint128 variableBorrowIndex;
    //the current variable borrow rate. Expressed in ray
    uint128 currentVariableBorrowRate;
    //the current stable borrow rate. Expressed in ray
    uint128 currentStableBorrowRate;
    //timestamp of last update
    uint40 lastUpdateTimestamp;
    //the id of the reserve. Represents the position in the list of the active reserves
    uint16 id;
    //timestamp until when liquidations are not allowed on the reserve, if set to past liquidations will be allowed
    uint40 liquidationGracePeriodUntil;
    //aToken address
    address aTokenAddress;
    //stableDebtToken address
    address stableDebtTokenAddress;
    //variableDebtToken address
    address variableDebtTokenAddress;
    //address of the interest rate strategy
    address interestRateStrategyAddress;
    //the current treasury balance, scaled
    uint128 accruedToTreasury;
    //the outstanding unbacked aTokens minted through the bridging feature
    uint128 unbacked;
    //the outstanding debt borrowed against this asset in isolation mode
    uint128 isolationModeTotalDebt;
    //the amount of underlying accounted for by the protocol
    uint128 virtualUnderlyingBalance;
  }

  struct ReserveConfigurationMap {
    //bit 0-15: LTV
    //bit 16-31: Liq. threshold
    //bit 32-47: Liq. bonus
    //bit 48-55: Decimals
    //bit 56: reserve is active
    //bit 57: reserve is frozen
    //bit 58: borrowing is enabled
    //bit 59: stable rate borrowing enabled
    //bit 60: asset is paused
    //bit 61: borrowing in isolation mode is enabled
    //bit 62: siloed borrowing enabled
    //bit 63: flashloaning enabled
    //bit 64-79: reserve factor
    //bit 80-115: borrow cap in whole tokens, borrowCap == 0 => no cap
    //bit 116-151: supply cap in whole tokens, supplyCap == 0 => no cap
    //bit 152-167: liquidation protocol fee
    //bit 168-175: eMode category
    //bit 176-211: unbacked mint cap in whole tokens, unbackedMintCap == 0 => minting disabled
    //bit 212-251: debt ceiling for isolation mode with (ReserveConfiguration::DEBT_CEILING_DECIMALS) decimals
    //bit 252: virtual accounting is enabled for the reserve
    //bit 253-255 unused

    uint256 data;
  }

  struct UserConfigurationMap {
    /**
     * @dev Bitmap of the users collaterals and borrows. It is divided in pairs of bits, one pair per asset.
     * The first bit indicates if an asset is used as collateral by the user, the second whether an
     * asset is borrowed by the user.
     */
    uint256 data;
  }

  struct EModeCategory {
    // each eMode category has a custom ltv and liquidation threshold
    uint16 ltv;
    uint16 liquidationThreshold;
    uint16 liquidationBonus;
    // each eMode category may or may not have a custom oracle to override the individual assets price oracles
    address priceSource;
    string label;
  }

  enum InterestRateMode {
    NONE,
    STABLE,
    VARIABLE
  }

  struct ReserveCache {
    uint256 currScaledVariableDebt;
    uint256 nextScaledVariableDebt;
    uint256 currPrincipalStableDebt;
    uint256 currAvgStableBorrowRate;
    uint256 currTotalStableDebt;
    uint256 nextAvgStableBorrowRate;
    uint256 nextTotalStableDebt;
    uint256 currLiquidityIndex;
    uint256 nextLiquidityIndex;
    uint256 currVariableBorrowIndex;
    uint256 nextVariableBorrowIndex;
    uint256 currLiquidityRate;
    uint256 currVariableBorrowRate;
    uint256 reserveFactor;
    ReserveConfigurationMap reserveConfiguration;
    address aTokenAddress;
    address stableDebtTokenAddress;
    address variableDebtTokenAddress;
    uint40 reserveLastUpdateTimestamp;
    uint40 stableDebtLastUpdateTimestamp;
  }

  struct ExecuteLiquidationCallParams {
    uint256 reservesCount;
    uint256 debtToCover;
    address collateralAsset;
    address debtAsset;
    address user;
    bool receiveAToken;
    address priceOracle;
    uint8 userEModeCategory;
    address priceOracleSentinel;
  }

  struct ExecuteSupplyParams {
    address asset;
    uint256 amount;
    address onBehalfOf;
    uint16 referralCode;
  }

  struct ExecuteBorrowParams {
    address asset;
    address user;
    address onBehalfOf;
    uint256 amount;
    InterestRateMode interestRateMode;
    uint16 referralCode;
    bool releaseUnderlying;
    uint256 maxStableRateBorrowSizePercent;
    uint256 reservesCount;
    address oracle;
    uint8 userEModeCategory;
    address priceOracleSentinel;
  }

  struct ExecuteRepayParams {
    address asset;
    uint256 amount;
    InterestRateMode interestRateMode;
    address onBehalfOf;
    bool useATokens;
  }

  struct ExecuteWithdrawParams {
    address asset;
    uint256 amount;
    address to;
    uint256 reservesCount;
    address oracle;
    uint8 userEModeCategory;
  }

  struct ExecuteSetUserEModeParams {
    uint256 reservesCount;
    address oracle;
    uint8 categoryId;
  }

  struct FinalizeTransferParams {
    address asset;
    address from;
    address to;
    uint256 amount;
    uint256 balanceFromBefore;
    uint256 balanceToBefore;
    uint256 reservesCount;
    address oracle;
    uint8 fromEModeCategory;
  }

  struct FlashloanParams {
    address receiverAddress;
    address[] assets;
    uint256[] amounts;
    uint256[] interestRateModes;
    address onBehalfOf;
    bytes params;
    uint16 referralCode;
    uint256 flashLoanPremiumToProtocol;
    uint256 flashLoanPremiumTotal;
    uint256 maxStableRateBorrowSizePercent;
    uint256 reservesCount;
    address addressesProvider;
    address pool;
    uint8 userEModeCategory;
    bool isAuthorizedFlashBorrower;
  }

  struct FlashloanSimpleParams {
    address receiverAddress;
    address asset;
    uint256 amount;
    bytes params;
    uint16 referralCode;
    uint256 flashLoanPremiumToProtocol;
    uint256 flashLoanPremiumTotal;
  }

  struct FlashLoanRepaymentParams {
    uint256 amount;
    uint256 totalPremium;
    uint256 flashLoanPremiumToProtocol;
    address asset;
    address receiverAddress;
    uint16 referralCode;
  }

  struct CalculateUserAccountDataParams {
    UserConfigurationMap userConfig;
    uint256 reservesCount;
    address user;
    address oracle;
    uint8 userEModeCategory;
  }

  struct ValidateBorrowParams {
    ReserveCache reserveCache;
    UserConfigurationMap userConfig;
    address asset;
    address userAddress;
    uint256 amount;
    InterestRateMode interestRateMode;
    uint256 maxStableLoanPercent;
    uint256 reservesCount;
    address oracle;
    uint8 userEModeCategory;
    address priceOracleSentinel;
    bool isolationModeActive;
    address isolationModeCollateralAddress;
    uint256 isolationModeDebtCeiling;
  }

  struct ValidateLiquidationCallParams {
    ReserveCache debtReserveCache;
    uint256 totalDebt;
    uint256 healthFactor;
    address priceOracleSentinel;
  }

  struct CalculateInterestRatesParams {
    uint256 unbacked;
    uint256 liquidityAdded;
    uint256 liquidityTaken;
    uint256 totalStableDebt;
    uint256 totalVariableDebt;
    uint256 averageStableBorrowRate;
    uint256 reserveFactor;
    address reserve;
    bool usingVirtualBalance;
    uint256 virtualUnderlyingBalance;
  }

  struct InitReserveParams {
    address asset;
    address aTokenAddress;
    address stableDebtAddress;
    address variableDebtAddress;
    address interestRateStrategyAddress;
    uint16 reservesCount;
    uint16 maxNumberReserves;
  }
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.18;

library EngineFlags {
  /// @dev magic value to be used as flag to keep unchanged any current configuration
  /// Strongly assumes that the value `type(uint256).max - 42` will never be used, which seems reasonable
  uint256 internal constant KEEP_CURRENT = type(uint256).max - 42;

  /// @dev magic value to be used as flag to keep unchanged any current configuration
  /// Strongly assumes that the value `KEEP_CURRENT_STRING` will never be used, which seems reasonable
  string internal constant KEEP_CURRENT_STRING = 'KEEP_CURRENT_STRING';

  /// @dev magic value to be used as flag to keep unchanged any current configuration
  /// Strongly assumes that the value `0x0000000000000000000000000000000000000050` will never be used, which seems reasonable
  address internal constant KEEP_CURRENT_ADDRESS =
    address(0x0000000000000000000000000000000000000050);

  /// @dev value to be used as flag for bool value true
  uint256 internal constant ENABLED = 1;

  /// @dev value to be used as flag for bool value false
  uint256 internal constant DISABLED = 0;

  /// @dev converts flag ENABLED DISABLED to bool
  function toBool(uint256 flag) internal pure returns (bool) {
    require(flag == 0 || flag == 1, 'INVALID_CONVERSION_TO_BOOL');
    return flag == 1;
  }

  /// @dev converts bool to ENABLED DISABLED flags
  function fromBool(bool isTrue) internal pure returns (uint256) {
    return isTrue ? ENABLED : DISABLED;
  }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.18;

import {IPool} from '../../../core/contracts/interfaces/IPool.sol';
import {IPoolConfigurator} from '../../../core/contracts/interfaces/IPoolConfigurator.sol';
import {IAaveOracle} from '../../../core/contracts/interfaces/IAaveOracle.sol';
import {IDefaultInterestRateStrategyV2} from '../../../core/contracts/interfaces/IDefaultInterestRateStrategyV2.sol';

/// @dev Examples here assume the usage of the `AaveV3Payload` base contracts
/// contained in this same repository
interface IAaveV3ConfigEngine {
  struct Basic {
    string assetSymbol;
    TokenImplementations implementations;
  }

  struct EngineLibraries {
    address listingEngine;
    address eModeEngine;
    address borrowEngine;
    address collateralEngine;
    address priceFeedEngine;
    address rateEngine;
    address capsEngine;
  }

  struct EngineConstants {
    IPool pool;
    IPoolConfigurator poolConfigurator;
    IAaveOracle oracle;
    address rewardsController;
    address collector;
    address defaultInterestRateStrategy;
  }

  struct InterestRateInputData {
    uint256 optimalUsageRatio;
    uint256 baseVariableBorrowRate;
    uint256 variableRateSlope1;
    uint256 variableRateSlope2;
  }

  /**
   * @dev Required for naming of a/v/s tokens
   * Example (mock):
   * PoolContext({
   *   networkName: 'Polygon',
   *   networkAbbreviation: 'Pol'
   * })
   */
  struct PoolContext {
    string networkName;
    string networkAbbreviation;
  }

  /**
   * @dev Example (mock):
   * Listing({
   *   asset: 0x7Fc66500c84A76Ad7e9c93437bFc5Ac33E2DDaE9,
   *   assetSymbol: 'AAVE',
   *   priceFeed: 0x547a514d5e3769680Ce22B2361c10Ea13619e8a9,
   *   rateStrategyParams: InterestRateInputData({
   *     optimalUsageRatio: 80_00,
   *     baseVariableBorrowRate: 25, // 0.25%
   *     variableRateSlope1: 3_00,
   *     variableRateSlope2: 75_00
   *   }),
   *   enabledToBorrow: EngineFlags.ENABLED,
   *   flashloanable: EngineFlags.ENABLED,
   *   stableRateModeEnabled: EngineFlags.DISABLED,
   *   borrowableInIsolation: EngineFlags.ENABLED,
   *   withSiloedBorrowing:, EngineFlags.DISABLED,
   *   ltv: 70_50, // 70.5%
   *   liqThreshold: 76_00, // 76%
   *   liqBonus: 5_00, // 5%
   *   reserveFactor: 10_00, // 10%
   *   supplyCap: 100_000, // 100k AAVE
   *   borrowCap: 60_000, // 60k AAVE
   *   debtCeiling: 100_000, // 100k USD
   *   liqProtocolFee: 10_00, // 10%
   *   eModeCategory: 0, // No category
   * }
   */
  struct Listing {
    address asset;
    string assetSymbol;
    address priceFeed;
    InterestRateInputData rateStrategyParams; // Mandatory, no matter if enabled for borrowing or not
    uint256 enabledToBorrow;
    uint256 stableRateModeEnabled; // Only considered is enabledToBorrow == EngineFlags.ENABLED (true)
    uint256 borrowableInIsolation; // Only considered is enabledToBorrow == EngineFlags.ENABLED (true)
    uint256 withSiloedBorrowing; // Only considered if enabledToBorrow == EngineFlags.ENABLED (true)
    uint256 flashloanable; // Independent from enabled to borrow: an asset can be flashloanble and not enabled to borrow
    uint256 ltv; // Only considered if liqThreshold > 0
    uint256 liqThreshold; // If `0`, the asset will not be enabled as collateral
    uint256 liqBonus; // Only considered if liqThreshold > 0
    uint256 reserveFactor; // Only considered if enabledToBorrow == EngineFlags.ENABLED (true)
    uint256 supplyCap; // If passing any value distinct to EngineFlags.KEEP_CURRENT, always configured
    uint256 borrowCap; // If passing any value distinct to EngineFlags.KEEP_CURRENT, always configured
    uint256 debtCeiling; // Only considered if liqThreshold > 0
    uint256 liqProtocolFee; // Only considered if liqThreshold > 0
    uint8 eModeCategory; // If `O`, no eMode category will be set
  }

  struct RepackedListings {
    address[] ids;
    Basic[] basics;
    BorrowUpdate[] borrowsUpdates;
    CollateralUpdate[] collateralsUpdates;
    PriceFeedUpdate[] priceFeedsUpdates;
    AssetEModeUpdate[] assetsEModeUpdates;
    CapsUpdate[] capsUpdates;
    IDefaultInterestRateStrategyV2.InterestRateData[] rates;
  }

  struct TokenImplementations {
    address aToken;
    address vToken;
    address sToken;
  }

  struct ListingWithCustomImpl {
    Listing base;
    TokenImplementations implementations;
  }

  /**
   * @dev Example (mock):
   * CapsUpdate({
   *   asset: AaveV3EthereumAssets.AAVE_UNDERLYING,
   *   supplyCap: 1_000_000,
   *   borrowCap: EngineFlags.KEEP_CURRENT
   * }
   */
  struct CapsUpdate {
    address asset;
    uint256 supplyCap; // Pass any value, of EngineFlags.KEEP_CURRENT to keep it as it is
    uint256 borrowCap; // Pass any value, of EngineFlags.KEEP_CURRENT to keep it as it is
  }

  /**
   * @dev Example (mock):
   * PriceFeedUpdate({
   *   asset: AaveV3EthereumAssets.AAVE_UNDERLYING,
   *   priceFeed: 0x547a514d5e3769680Ce22B2361c10Ea13619e8a9
   * })
   */
  struct PriceFeedUpdate {
    address asset;
    address priceFeed;
  }

  /**
   * @dev Example (mock):
   * CollateralUpdate({
   *   asset: AaveV3EthereumAssets.AAVE_UNDERLYING,
   *   ltv: 60_00,
   *   liqThreshold: 70_00,
   *   liqBonus: EngineFlags.KEEP_CURRENT,
   *   debtCeiling: EngineFlags.KEEP_CURRENT,
   *   liqProtocolFee: 7_00
   * })
   */
  struct CollateralUpdate {
    address asset;
    uint256 ltv;
    uint256 liqThreshold;
    uint256 liqBonus;
    uint256 debtCeiling;
    uint256 liqProtocolFee;
  }

  /**
   * @dev Example (mock):
   * BorrowUpdate({
   *   asset: AaveV3EthereumAssets.AAVE_UNDERLYING,
   *   enabledToBorrow: EngineFlags.ENABLED,
   *   flashloanable: EngineFlags.KEEP_CURRENT,
   *   stableRateModeEnabled: EngineFlags.KEEP_CURRENT,
   *   borrowableInIsolation: EngineFlags.KEEP_CURRENT,
   *   withSiloedBorrowing: EngineFlags.KEEP_CURRENT,
   *   reserveFactor: 15_00, // 15%
   * })
   */
  struct BorrowUpdate {
    address asset;
    uint256 enabledToBorrow;
    uint256 flashloanable;
    uint256 stableRateModeEnabled;
    uint256 borrowableInIsolation;
    uint256 withSiloedBorrowing;
    uint256 reserveFactor;
  }

  /**
   * @dev Example (mock):
   * AssetEModeUpdate({
   *   asset: AaveV3EthereumAssets.rETH_UNDERLYING,
   *   eModeCategory: 1, // ETH correlated
   * })
   */
  struct AssetEModeUpdate {
    address asset;
    uint8 eModeCategory;
  }

  /**
   * @dev Example (mock):
   * EModeCategoryUpdate({
   *   eModeCategory: 1, // ETH correlated
   *   ltv: 60_00,
   *   liqThreshold: 70_00,
   *   liqBonus: EngineFlags.KEEP_CURRENT,
   *   priceSource: EngineFlags.KEEP_CURRENT_ADDRESS,
   *   label: EngineFlags.KEEP_CURRENT_STRING
   * })
   */
  struct EModeCategoryUpdate {
    uint8 eModeCategory;
    uint256 ltv;
    uint256 liqThreshold;
    uint256 liqBonus;
    address priceSource;
    string label;
  }

  /**
   * @dev Example (mock):
   * RateStrategyUpdate({
   *   asset: AaveV3OptimismAssets.USDT_UNDERLYING,
   *   params: InterestRateInputData({
   *     optimalUsageRatio: _bpsToRay(80_00),
   *     baseVariableBorrowRate: EngineFlags.KEEP_CURRENT,
   *     variableRateSlope1: EngineFlags.KEEP_CURRENT,
   *     variableRateSlope2: _bpsToRay(75_00)
   *   })
   * })
   */
  struct RateStrategyUpdate {
    address asset;
    InterestRateInputData params;
  }

  /**
   * @notice Performs full listing of the assets, in the Aave pool configured in this engine instance
   * @param context `PoolContext` struct, effectively meta-data for naming of a/v/s tokens.
   *   More information on the documentation of the struct.
   * @param listings `Listing[]` list of declarative configs for every aspect of the asset listings.
   *   More information on the documentation of the struct.
   */
  function listAssets(PoolContext memory context, Listing[] memory listings) external;

  /**
   * @notice Performs full listings of assets, in the Aave pool configured in this engine instance
   * @dev This function allows more customization, especifically enables to set custom implementations
   *   for a/v/s tokens.
   *   IMPORTANT. Use it only if understanding the internals of the Aave v3 protocol
   * @param context `PoolContext` struct, effectively meta-data for naming of a/v/s tokens.
   *   More information on the documentation of the struct.
   * @param listings `ListingWithCustomImpl[]` list of declarative configs for every aspect of the asset listings.
   */
  function listAssetsCustom(
    PoolContext memory context,
    ListingWithCustomImpl[] memory listings
  ) external;

  /**
   * @notice Performs an update of the caps (supply, borrow) of the assets, in the Aave pool configured in this engine instance
   * @param updates `CapsUpdate[]` list of declarative updates containing the new caps
   *   More information on the documentation of the struct.
   */
  function updateCaps(CapsUpdate[] memory updates) external;

  /**
   * @notice Performs an update on the rate strategy params of the assets, in the Aave pool configured in this engine instance
   * @dev The engine itself manages if a new rate strategy needs to be deployed or if an existing one can be re-used
   * @param updates `RateStrategyUpdate[]` list of declarative updates containing the new rate strategy params
   *   More information on the documentation of the struct.
   */
  function updateRateStrategies(RateStrategyUpdate[] memory updates) external;

  /**
   * @notice Performs an update of the collateral-related params of the assets, in the Aave pool configured in this engine instance
   * @param updates `CollateralUpdate[]` list of declarative updates containing the new parameters
   *   More information on the documentation of the struct.
   */
  function updateCollateralSide(CollateralUpdate[] memory updates) external;

  /**
   * @notice Performs an update of the price feed of the assets, in the Aave pool configured in this engine instance
   * @param updates `PriceFeedUpdate[]` list of declarative updates containing the new parameters
   *   More information on the documentation of the struct.
   */
  function updatePriceFeeds(PriceFeedUpdate[] memory updates) external;

  /**
   * @notice Performs an update of the borrow-related params of the assets, in the Aave pool configured in this engine instance
   * @param updates `BorrowUpdate[]` list of declarative updates containing the new parameters
   *   More information on the documentation of the struct.
   */
  function updateBorrowSide(BorrowUpdate[] memory updates) external;

  /**
   * @notice Performs an update of the e-mode categories, in the Aave pool configured in this engine instance
   * @param updates `EModeCategoryUpdate[]` list of declarative updates containing the new parameters
   *   More information on the documentation of the struct.
   */
  function updateEModeCategories(EModeCategoryUpdate[] memory updates) external;

  /**
   * @notice Performs an update of the e-mode category of the assets, in the Aave pool configured in this engine instance
   * @param updates `AssetEModeUpdate[]` list of declarative updates containing the new parameters
   *   More information on the documentation of the struct.
   */
  function updateAssetsEMode(AssetEModeUpdate[] calldata updates) external;

  function DEFAULT_INTEREST_RATE_STRATEGY() external view returns (address);

  function POOL() external view returns (IPool);

  function POOL_CONFIGURATOR() external view returns (IPoolConfigurator);

  function ORACLE() external view returns (IAaveOracle);

  function ATOKEN_IMPL() external view returns (address);

  function VTOKEN_IMPL() external view returns (address);

  function STOKEN_IMPL() external view returns (address);

  function REWARDS_CONTROLLER() external view returns (address);

  function COLLECTOR() external view returns (address);

  function BORROW_ENGINE() external view returns (address);

  function CAPS_ENGINE() external view returns (address);

  function COLLATERAL_ENGINE() external view returns (address);

  function EMODE_ENGINE() external view returns (address);

  function LISTING_ENGINE() external view returns (address);

  function PRICE_FEED_ENGINE() external view returns (address);

  function RATE_ENGINE() external view returns (address);
}

// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0;

import {DataTypes} from 'aave-v3-origin/core/contracts/protocol/libraries/types/DataTypes.sol';
import {Errors} from 'aave-v3-origin/core/contracts/protocol/libraries/helpers/Errors.sol';
import {ConfiguratorInputTypes} from 'aave-v3-origin/core/contracts/protocol/libraries/types/ConfiguratorInputTypes.sol';
import {IPoolAddressesProvider} from 'aave-v3-origin/core/contracts/interfaces/IPoolAddressesProvider.sol';
import {IAToken} from 'aave-v3-origin/core/contracts/interfaces/IAToken.sol';
import {IPool} from 'aave-v3-origin/core/contracts/interfaces/IPool.sol';
import {IPoolConfigurator} from 'aave-v3-origin/core/contracts/interfaces/IPoolConfigurator.sol';
import {IPriceOracleGetter} from 'aave-v3-origin/core/contracts/interfaces/IPriceOracleGetter.sol';
import {IAaveOracle} from 'aave-v3-origin/core/contracts/interfaces/IAaveOracle.sol';
import {IACLManager as BasicIACLManager} from 'aave-v3-origin/core/contracts/interfaces/IACLManager.sol';
import {IPoolDataProvider} from 'aave-v3-origin/core/contracts/interfaces/IPoolDataProvider.sol';
import {IDefaultInterestRateStrategyV2} from 'aave-v3-origin/core/contracts/interfaces/IDefaultInterestRateStrategyV2.sol';
import {IReserveInterestRateStrategy} from 'aave-v3-origin/core/contracts/interfaces/IReserveInterestRateStrategy.sol';
import {IPoolDataProvider as IAaveProtocolDataProvider} from 'aave-v3-origin/core/contracts/interfaces/IPoolDataProvider.sol';
import {AggregatorInterface} from 'aave-v3-origin/core/contracts/dependencies/chainlink/AggregatorInterface.sol';

interface IACLManager is BasicIACLManager {
  function hasRole(bytes32 role, address account) external view returns (bool);

  function DEFAULT_ADMIN_ROLE() external pure returns (bytes32);

  function renounceRole(bytes32 role, address account) external;

  function getRoleAdmin(bytes32 role) external view returns (bytes32);

  function grantRole(bytes32 role, address account) external;

  function revokeRole(bytes32 role, address account) external;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/Address.sol)
// From commit https://github.com/OpenZeppelin/openzeppelin-contracts/commit/8b778fa20d6d76340c5fac1ed66c80273f05b95a

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
  /**
   * @dev Returns true if `account` is a contract.
   *
   * [IMPORTANT]
   * ====
   * It is unsafe to assume that an address for which this function returns
   * false is an externally-owned account (EOA) and not a contract.
   *
   * Among others, `isContract` will return false for the following
   * types of addresses:
   *
   *  - an externally-owned account
   *  - a contract in construction
   *  - an address where a contract will be created
   *  - an address where a contract lived, but was destroyed
   * ====
   *
   * [IMPORTANT]
   * ====
   * You shouldn't rely on `isContract` to protect against flash loan attacks!
   *
   * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
   * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
   * constructor.
   * ====
   */
  function isContract(address account) internal view returns (bool) {
    // This method relies on extcodesize/address.code.length, which returns 0
    // for contracts in construction, since the code is only stored at the end
    // of the constructor execution.

    return account.code.length > 0;
  }

  /**
   * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
   * `recipient`, forwarding all available gas and reverting on errors.
   *
   * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
   * of certain opcodes, possibly making contracts go over the 2300 gas limit
   * imposed by `transfer`, making them unable to receive funds via
   * `transfer`. {sendValue} removes this limitation.
   *
   * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
   *
   * IMPORTANT: because control is transferred to `recipient`, care must be
   * taken to not create reentrancy vulnerabilities. Consider using
   * {ReentrancyGuard} or the
   * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
   */
  function sendValue(address payable recipient, uint256 amount) internal {
    require(address(this).balance >= amount, 'Address: insufficient balance');

    (bool success, ) = recipient.call{value: amount}('');
    require(success, 'Address: unable to send value, recipient may have reverted');
  }

  /**
   * @dev Performs a Solidity function call using a low level `call`. A
   * plain `call` is an unsafe replacement for a function call: use this
   * function instead.
   *
   * If `target` reverts with a revert reason, it is bubbled up by this
   * function (like regular Solidity function calls).
   *
   * Returns the raw returned data. To convert to the expected return value,
   * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
   *
   * Requirements:
   *
   * - `target` must be a contract.
   * - calling `target` with `data` must not revert.
   *
   * _Available since v3.1._
   */
  function functionCall(address target, bytes memory data) internal returns (bytes memory) {
    return functionCallWithValue(target, data, 0, 'Address: low-level call failed');
  }

  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
   * `errorMessage` as a fallback revert reason when `target` reverts.
   *
   * _Available since v3.1._
   */
  function functionCall(
    address target,
    bytes memory data,
    string memory errorMessage
  ) internal returns (bytes memory) {
    return functionCallWithValue(target, data, 0, errorMessage);
  }

  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
   * but also transferring `value` wei to `target`.
   *
   * Requirements:
   *
   * - the calling contract must have an ETH balance of at least `value`.
   * - the called Solidity function must be `payable`.
   *
   * _Available since v3.1._
   */
  function functionCallWithValue(
    address target,
    bytes memory data,
    uint256 value
  ) internal returns (bytes memory) {
    return functionCallWithValue(target, data, value, 'Address: low-level call with value failed');
  }

  /**
   * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
   * with `errorMessage` as a fallback revert reason when `target` reverts.
   *
   * _Available since v3.1._
   */
  function functionCallWithValue(
    address target,
    bytes memory data,
    uint256 value,
    string memory errorMessage
  ) internal returns (bytes memory) {
    require(address(this).balance >= value, 'Address: insufficient balance for call');
    (bool success, bytes memory returndata) = target.call{value: value}(data);
    return verifyCallResultFromTarget(target, success, returndata, errorMessage);
  }

  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
   * but performing a static call.
   *
   * _Available since v3.3._
   */
  function functionStaticCall(
    address target,
    bytes memory data
  ) internal view returns (bytes memory) {
    return functionStaticCall(target, data, 'Address: low-level static call failed');
  }

  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
   * but performing a static call.
   *
   * _Available since v3.3._
   */
  function functionStaticCall(
    address target,
    bytes memory data,
    string memory errorMessage
  ) internal view returns (bytes memory) {
    (bool success, bytes memory returndata) = target.staticcall(data);
    return verifyCallResultFromTarget(target, success, returndata, errorMessage);
  }

  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
   * but performing a delegate call.
   *
   * _Available since v3.4._
   */
  function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
    return functionDelegateCall(target, data, 'Address: low-level delegate call failed');
  }

  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
   * but performing a delegate call.
   *
   * _Available since v3.4._
   */
  function functionDelegateCall(
    address target,
    bytes memory data,
    string memory errorMessage
  ) internal returns (bytes memory) {
    (bool success, bytes memory returndata) = target.delegatecall(data);
    return verifyCallResultFromTarget(target, success, returndata, errorMessage);
  }

  /**
   * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
   * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
   *
   * _Available since v4.8._
   */
  function verifyCallResultFromTarget(
    address target,
    bool success,
    bytes memory returndata,
    string memory errorMessage
  ) internal view returns (bytes memory) {
    if (success) {
      if (returndata.length == 0) {
        // only check isContract if the call was successful and the return data is empty
        // otherwise we already know that it was a contract
        require(isContract(target), 'Address: call to non-contract');
      }
      return returndata;
    } else {
      _revert(returndata, errorMessage);
    }
  }

  /**
   * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
   * revert reason or using the provided one.
   *
   * _Available since v4.3._
   */
  function verifyCallResult(
    bool success,
    bytes memory returndata,
    string memory errorMessage
  ) internal pure returns (bytes memory) {
    if (success) {
      return returndata;
    } else {
      _revert(returndata, errorMessage);
    }
  }

  function _revert(bytes memory returndata, string memory errorMessage) private pure {
    // Look for revert reason and bubble it up if present
    if (returndata.length > 0) {
      // The easiest way to bubble the revert reason is using memory via assembly
      /// @solidity memory-safe-assembly
      assembly {
        let returndata_size := mload(returndata)
        revert(add(32, returndata), returndata_size)
      }
    } else {
      revert(errorMessage);
    }
  }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {IACLManager, IPoolConfigurator, IPoolDataProvider} from 'aave-address-book/AaveV3.sol';
import {Address} from 'solidity-utils/contracts/oz-common/Address.sol';
import {EngineFlags} from 'aave-v3-origin/periphery/contracts/v3-config-engine/EngineFlags.sol';
import {IAaveV3ConfigEngine} from 'aave-v3-origin/periphery/contracts/v3-config-engine/IAaveV3ConfigEngine.sol';

/**
 * @title ICapsPlusRiskSteward
 * @author BGD labs
 * @notice Contract managing caps increasing on an aave v3 pool
 */
interface ICapsPlusRiskSteward {
  /**
   * @notice Struct storing the last update of a specific cap
   */
  struct Debounce {
    uint40 supplyCapLastUpdated;
    uint40 borrowCapLastUpdated;
  }

  /**
   * @notice The minimum delay that must be respected between updating a specific cap twice
   */
  function MINIMUM_DELAY() external view returns (uint256);

  /**
   * @notice The config engine used to perform the cap update via delegatecall
   */
  function CONFIG_ENGINE() external view returns (IAaveV3ConfigEngine);

  /**
   * @notice The pool data provider of the POOL the steward controls
   */
  function POOL_DATA_PROVIDER() external view returns (IPoolDataProvider);

  /**
   * @notice The safe controlling the steward
   */
  function RISK_COUNCIL() external view returns (address);

  /**
   * @notice Allows increasing borrow and supply caps across multiple assets
   * @dev A cap increase is only possible ever 5 days per asset
   * @dev A cap increase is only allowed to increase the cap by 50%
   * @param capUpdates caps to be updated
   */
  function updateCaps(IAaveV3ConfigEngine.CapsUpdate[] calldata capUpdates) external;

  /**
   * @notice Returns the timelock for a specific asset
   * @param asset for which to fetch the timelock
   */
  function getTimelock(address asset) external view returns (Debounce memory);
}

{
  "remappings": [
    "aave-address-book/=lib/aave-address-book/src/",
    "aave-v3-origin/=lib/aave-address-book/lib/aave-v3-origin/src/",
    "aave-v3-core/=lib/aave-address-book/lib/aave-v3-origin/src/core/",
    "aave-v3-periphery/=lib/aave-address-book/lib/aave-v3-origin/src/periphery/",
    "forge-std/=lib/forge-std/src/",
    "solidity-utils/=lib/solidity-utils/src/",
    "@openzeppelin/contracts-upgradeable/=lib/solidity-utils/lib/openzeppelin-contracts-upgradeable/contracts/",
    "@openzeppelin/contracts/=lib/solidity-utils/lib/openzeppelin-contracts-upgradeable/lib/openzeppelin-contracts/contracts/",
    "ds-test/=lib/solidity-utils/lib/forge-std/lib/ds-test/src/",
    "erc4626-tests/=lib/solidity-utils/lib/openzeppelin-contracts-upgradeable/lib/erc4626-tests/",
    "openzeppelin-contracts-upgradeable/=lib/solidity-utils/lib/openzeppelin-contracts-upgradeable/",
    "openzeppelin-contracts/=lib/solidity-utils/lib/openzeppelin-contracts-upgradeable/lib/openzeppelin-contracts/"
  ],
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "metadata": {
    "useLiteralContent": false,
    "bytecodeHash": "ipfs",
    "appendCBOR": true
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "evmVersion": "paris",
  "viaIR": false,
  "libraries": {
    "lib/aave-address-book/lib/aave-v3-origin/src/core/contracts/protocol/libraries/logic/BorrowLogic.sol": {
      "BorrowLogic": "0x41717de714Db8630F02Dea8f6A39C73A5b5C7df1"
    },
    "lib/aave-address-book/lib/aave-v3-origin/src/core/contracts/protocol/libraries/logic/BridgeLogic.sol": {
      "BridgeLogic": "0xca2385754bCa5d632F5160B560352aBd12029685"
    },
    "lib/aave-address-book/lib/aave-v3-origin/src/core/contracts/protocol/libraries/logic/ConfiguratorLogic.sol": {
      "ConfiguratorLogic": "0x6F4964Db83CeCCDc98164796221d5259b922313C"
    },
    "lib/aave-address-book/lib/aave-v3-origin/src/core/contracts/protocol/libraries/logic/EModeLogic.sol": {
      "EModeLogic": "0x12959a64470Dd003590Bb1EcFC436dddE7608724"
    },
    "lib/aave-address-book/lib/aave-v3-origin/src/core/contracts/protocol/libraries/logic/FlashLoanLogic.sol": {
      "FlashLoanLogic": "0x6DA8d7EF0625e965dafc393793C048096392d4a5"
    },
    "lib/aave-address-book/lib/aave-v3-origin/src/core/contracts/protocol/libraries/logic/LiquidationLogic.sol": {
      "LiquidationLogic": "0x72c272aE914EC11AFe1e74A0016e0A91c1A6014e"
    },
    "lib/aave-address-book/lib/aave-v3-origin/src/core/contracts/protocol/libraries/logic/PoolLogic.sol": {
      "PoolLogic": "0x55D552EFbc8aEB87AffCEa8630B43a33BA24D975"
    },
    "lib/aave-address-book/lib/aave-v3-origin/src/core/contracts/protocol/libraries/logic/SupplyLogic.sol": {
      "SupplyLogic": "0x9336943ecd91C201D9ED5A21562b34Aef710052f"
    }
  }
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"contract IPoolDataProvider","name":"poolDataProvider","type":"address"},{"internalType":"contract IAaveV3ConfigEngine","name":"engine","type":"address"},{"internalType":"address","name":"riskCouncil","type":"address"},{"internalType":"uint256","name":"minimumDelay","type":"uint256"}],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[],"name":"CONFIG_ENGINE","outputs":[{"internalType":"contract IAaveV3ConfigEngine","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"MINIMUM_DELAY","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"POOL_DATA_PROVIDER","outputs":[{"internalType":"contract IPoolDataProvider","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"RISK_COUNCIL","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"asset","type":"address"}],"name":"getTimelock","outputs":[{"components":[{"internalType":"uint40","name":"supplyCapLastUpdated","type":"uint40"},{"internalType":"uint40","name":"borrowCapLastUpdated","type":"uint40"}],"internalType":"struct ICapsPlusRiskSteward.Debounce","name":"","type":"tuple"}],"stateMutability":"view","type":"function"},{"inputs":[{"components":[{"internalType":"address","name":"asset","type":"address"},{"internalType":"uint256","name":"supplyCap","type":"uint256"},{"internalType":"uint256","name":"borrowCap","type":"uint256"}],"internalType":"struct IAaveV3ConfigEngine.CapsUpdate[]","name":"capUpdates","type":"tuple[]"}],"name":"updateCaps","outputs":[],"stateMutability":"nonpayable","type":"function"}]

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

0000000000000000000000008cb4b66f7b13f2ae4d3c91338fc007dbf8c14208000000000000000000000000482548b76d4c577a0b5cb2a1f97efb2893e957ed00000000000000000000000047c71dfeb55ebaa431ae3fbf99ea50e0d3d30fa8000000000000000000000000000000000000000000000000000000000002a300

-----Decoded View---------------
Arg [0] : poolDataProvider (address): 0x8Cb4b66f7B13F2Ae4D3c91338fC007dbF8C14208
Arg [1] : engine (address): 0x482548b76D4C577A0b5cb2A1f97EFB2893E957ed
Arg [2] : riskCouncil (address): 0x47c71dFEB55Ebaa431Ae3fbF99Ea50e0D3d30fA8
Arg [3] : minimumDelay (uint256): 172800

-----Encoded View---------------
4 Constructor Arguments found :
Arg [0] : 0000000000000000000000008cb4b66f7b13f2ae4d3c91338fc007dbf8c14208
Arg [1] : 000000000000000000000000482548b76d4c577a0b5cb2a1f97efb2893e957ed
Arg [2] : 00000000000000000000000047c71dfeb55ebaa431ae3fbf99ea50e0d3d30fa8
Arg [3] : 000000000000000000000000000000000000000000000000000000000002a300