// SPDX-License-Identifier: BUSL-1.1
/**
 *
 * For additional terms of the smart contract, please refer to the documentation uploaded under the documents section.
 * You can access the documents by calling the smart contract function named "getAllDocuments".
 *
 */
pragma solidity 0.8.15;

import {Address} from "@openzeppelin/contracts/utils/Address.sol";
import {EnumerableSet} from "@openzeppelin/contracts/utils/structs/EnumerableSet.sol";
import {ERC165Checker} from "@openzeppelin/contracts/utils/introspection/ERC165Checker.sol";
import {ERC165Upgradeable} from "@openzeppelin/contracts-upgradeable/utils/introspection/ERC165Upgradeable.sol";
import {ERC20BurnableUpgradeable} from "@openzeppelin/contracts-upgradeable/token/ERC20/extensions/ERC20BurnableUpgradeable.sol";
import {ERC20Upgradeable} from "@openzeppelin/contracts-upgradeable/token/ERC20/ERC20Upgradeable.sol";
import {OwnableUpgradeable} from "@openzeppelin/contracts-upgradeable/access/OwnableUpgradeable.sol";
import {PausableUpgradeable} from "@openzeppelin/contracts-upgradeable/security/PausableUpgradeable.sol";
import {SafeERC20} from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";

import {IAddressScreen} from "../../../interfaces/IAddressScreen.sol";
import {IBondRolloverable} from "../../../interfaces/IBondRolloverable.sol";
import {IERC20Burnable} from "../../../interfaces/IERC20Burnable.sol";
import {IERC20Standard} from "../../../interfaces/IERC20Standard.sol";
import {IERC4626Asset} from "../../../interfaces/IERC4626Asset.sol";
import {PreciseUnitMath} from "../../../libs/PreciseUnitMath.sol";

/**
 * @title PV01SinglePaymentBondV2
 * @dev PV01SinglePaymentBond implementation contract for V2.
 * Added support for bond token to be used in an ERC-4626 vault.
 * - Added rollover commitments (equivalent of funding commitments, but sent by a vault)
 * - Bond tokens can be burnedFrom() if an address is given spending approval
 * Breaking changes:
 * - Event SettleBondPurchase now has field for the proceed token (vault asset token) address.
 * We intentionally use the "*Upgradeable.sol" versions of the Open Zeppelin contracts where applicable
 * because they support the initializer pattern which is required to support the bond factory initializing the clones it produces.
 */
contract PV01SinglePaymentBondV2 is
  IBondRolloverable,
  PausableUpgradeable,
  OwnableUpgradeable,
  ERC20BurnableUpgradeable,
  ERC165Upgradeable
{
  using PreciseUnitMath for uint256;
  using SafeERC20 for IERC20Standard;
  using EnumerableSet for EnumerableSet.AddressSet;
  using EnumerableSet for EnumerableSet.Bytes32Set;
  using Address for address;
  using ERC165Checker for address;

  // Custom Errors
  error AddressScreenAddressZero();
  error AddressScreenDenyListedFrom();
  error AddressScreenDenyListedSender();
  error AddressScreenDenyListedTo();
  error AddressScreenIsNotContract();
  error AssetTokenAddressZero();
  error AssetTokenNotContract();
  error BondIssuerAddressZero();
  error BondTokenAmountMustBePositive();
  error CallerNotAllowListed();
  error CannotSendEtherDirectly();
  error ContractNotFullyRepaid();
  error DateMustBeBeforeMaturity();
  error DocumentAlreadyExists();
  error FundingCommitmentDatePassed();
  error FundingCommitmentDoesNotExist();
  error FundingCommitmentExists();
  error FundingCommitmentsPresent();
  error FundingCommitmentTimeoutNotFinished();
  error InvalidDocumentName();
  error InvalidProceedTokenAddress();
  error InvalidURI();
  error MaturityDateMustBeInFuture();
  error NameCannotBeEmpty();
  error NewAddressScreenMustBeDifferent();
  error NewMaturityDateMustBeDifferent();
  error NoBondTokenToClaim();
  error NoDocumentSpecificationsProvided();
  error NoFundingCommitment();
  error NoFundingCommitmentsOrDocumentsProvided();
  error NoFundingCommitmentsProvided();
  error NoRolloverCommitment();
  error NothingToSweep();
  error OwnerAddressZero();
  error PriceMustBePositive();
  error ProceedAmountLimitNotPositive();
  error ProceedAmountMustBePositive();
  error ProceedExceedsLimit();
  error ProceedTokenAddressNotERC20();
  error ProceedTokenDecimalsMismatch();
  error RolloverCommitmentAddressNotERC4626();
  error RolloverCommitmentDatePassed();
  error RolloverCommitmentDoesNotExist();
  error RolloverCommitmentExists();
  error RolloverCommitmentTimeoutNotFinished();
  error SweepDateMustBeAfterMaturity();
  error SweepDateNotPassed();
  error SweepDelayMustExceedLimit();
  error SymbolCannotBeEmpty();
  error UseSweepForAssetToken();

  /**
   * @dev Emitted when the address screening contract being used by this bond contract changes
   */
  event AddressScreenContractUpdated(address indexed newAddress, string reason);

  /**
   * @dev Emitted when an investor successfully claims their investment plus yield
   */
  event Claim(address indexed addr, uint256 bondTokenAmount, uint256 assetTokenAmount);

  /**
   * @dev Emitted when a funding commitment is removed from this bond contract
   */
  event FundingCommitmentRemoved(address indexed addr);

  /**
   * @dev Emitted when a funding commitment is updated on this bond contract
   */
  event FundingCommitmentUpdated(address indexed addr, uint256 bondTokenAmount, uint256 proceed, uint256 date);

  /**
   * @dev Emitted when a new document is added to this bond contract
   */
  event NewDocumentAdded(bytes32 indexed docNameHash, string docName, string uri, bytes32 docHashSha256);

  /**
   * @dev Emitted when a new funding commitment is added to this bond contract
   */
  event NewFundingCommitmentAdded(address indexed addr, uint256 bondTokenAmount, uint256 proceed, uint256 date);

  /**
   * @dev Emitted when a new rollover commitment is added to this bond contract
   */
  event NewRolloverCommitmentAdded(
    address indexed addr,
    address indexed proceedTokenAddress,
    uint256 proceedTokenAmountLimit,
    uint256 price,
    uint256 date
  );

  /**
   * @dev Emitted when a rollover commitment is updated on this bond contract
   */
  event RolloverCommitmentUpdated(
    address indexed addr,
    address indexed proceedTokenAddress,
    uint256 proceedTokenAmountLimit,
    uint256 price,
    uint256 date
  );

  /**
   * @dev Emitted when a rollover commitment is removed from this bond contract
   */
  event RolloverCommitmentRemoved(address indexed addr);

  /**
   * @dev Emitted when all bond tokens have been claimed
   */
  event Redeemed();

  /**
   * @dev Emitted when this bond's maturity date is updated
   */
  event MaturityDateUpdated(uint64 newDate, string reason);

  /**
   * @dev Emitted when an investor pays a funding commitment
   */
  event SettleBondPurchase(
    address indexed addr,
    address indexed proceedTokenAddress,
    uint256 proceed,
    uint256 bondTokenAmount
  );

  /**
   * @dev Emitted when this bond is swept of remaining bond tokens
   */
  event Sweep(address indexed addr, uint256 assetTokenAmount);

  /**
   * @dev Emitted when this bond is swept of any non-bond tokens
   */
  event SweepOther(address indexed addr, address otherTokenAddress, uint256 otherTokenAmount);

  /**
   * @dev Caller address must be in the address screen allow list
   */
  modifier onlyAllowListed() {
    if (!addressScreen.isAllowListed(msg.sender)) revert CallerNotAllowListed();
    _;
  }

  /**
   * @dev Details of a funding commitment
   */
  struct FundingCommitmentInternal {
    uint256 bondTokenAmount;
    uint256 proceed;
    uint256 date;
  }

  /**
   * @dev Details of a rollover commitment along with the investor (vault) address for that rollover commitment
   */
  struct RolloverCommitmentExternal {
    address address_;
    RolloverCommitmentInternal rolloverCommitmentInternal;
  }

  /**
   * @dev Details of a rollover commitment.
   * Consider a rollover from Bond01 to Bond02, we have:
   *   Proceed token = Bond01 = existing asset tokens in the vault at the time of settling the rollover.
   *   Bond token = Bond02 = the new asset tokens in the vault after settling the rollover.
   * The amount of bond token Bond02 = ( proceed token amount Bond01 / price )
   */
  struct RolloverCommitmentInternal {
    /// @dev Maximum amount of proceed tokens that can be used for the given price
    uint256 proceedTokenAmountLimit;
    /// @dev Address of the proceed token ERC20 contract
    address proceedTokenAddress;
    /**
     * @dev Price is the amount of proceed tokens Bond01 required to get one new bond token Bond02.
     * Price uses 18 decimals precision and units are 'proceed tokens required to get one new bond token'.
     * For example a price of 990_000_000_000_000_000, which equates to 99%, means:
     *   number of new bond Bond02 tokens to mint = number of proceed tokens Bond01 sent / price.
     */
    uint256 price;
    /// @dev Rollover commitment date
    uint256 date;
  }

  /**
   * @dev Details of a funding commitment along with the investor address for that funding commitment
   */
  struct FundingCommitmentExternal {
    address address_;
    FundingCommitmentInternal fundingCommitmentInternal;
  }

  /**
   * @dev Document details as stored in the bond contract
   */
  struct DocumentDetail {
    string docName;
    bytes32 docNameHash;
    bytes32 docHashSha256;
    uint256 lastModified;
    string uri;
  }

  /**
   * @dev Document specification provided when a document is created
   */
  struct DocumentSpec {
    string docName;
    bytes32 docHashSha256;
    string uri;
  }

  //------------------------------------------------------------------------------
  // Funding commitments
  //------------------------------------------------------------------------------
  /**
   * @dev Mapping of investor address => funding commitment details
   */
  mapping(address => FundingCommitmentInternal) internal fundingCommitments;

  /**
   * @dev Set of investor addresses that have funding commitments. Once an investor settles the bond purchase, the funding commitment is removed.
   */
  EnumerableSet.AddressSet internal addressWithFundingCommitment;

  //------------------------------------------------------------------------------
  // Rollover commitments
  //------------------------------------------------------------------------------
  /**
   * @dev Mapping of investor (vault) address => rollover commitment details
   */
  mapping(address => RolloverCommitmentInternal) internal rolloverCommitments;

  /**
   * @dev Set of investor (vault) addresses that have rollover commitments. Once an investor (vault) settles the bond purchase rollover, the rollovercommitment is removed.
   */
  EnumerableSet.AddressSet internal addressWithRolloverCommitment;

  //------------------------------------------------------------------------------
  // Documents
  //------------------------------------------------------------------------------
  /**
   * @dev Mapping of document name hashes => document details
   */
  mapping(bytes32 => DocumentDetail) internal documents;

  /**
   * @dev Set of document name hashes
   */
  EnumerableSet.Bytes32Set internal docNameHashes;

  //------------------------------------------------------------------------------
  // Asset token
  //------------------------------------------------------------------------------
  /**
   * @dev Number of decimals on the asset token
   */
  uint8 public assetTokenDecimals;

  /**
   * @dev Asset token
   */
  IERC20Standard public assetToken;

  //------------------------------------------------------------------------------
  // Bond details
  //------------------------------------------------------------------------------
  /**
   * @dev Maturity date for this bond contract
   */
  uint64 public maturityDate;

  /**
   * @dev Address screen contract used by this bond contract
   */
  IAddressScreen public addressScreen;

  /**
   * @dev Interest rate fraction of the investment, held as percentage with 18 decimals for example:
   * 10% => interestRateFraction_ = 10 ** 17. The interest rate fraction is not the annualised interest
   * rate, it is already pro-rata and can be used directly to calculate the total amount to redeem. Max value
   * is 1844% (a uint64 storing 18 decimals equivalent).
   */
  uint64 public interestRateFraction;

  /**
   * @dev Address of the bond issuer
   */
  address public bondIssuer;

  /**
   * @dev Time interval in seconds between the maturity date and the earliest possible sweep date.
   * This time interval is fixed at bond creation time and is used to calculate actual sweep date according
   * to the current maturity date.
   */
  uint64 public sweepDelaySecondsFromMaturityDate;

  /**
   * @dev Bond collateral identifier
   */
  string public collateralId;

  /**
   * @dev Bond type
   */
  bytes32 public constant BOND_TYPE = "SinglePaymentBond";

  /**
   * @dev Bond version for bond type
   */
  uint8 public constant VERSION = 2;

  string internal constant REASON_INITIALIZE = "Initialize";

  constructor() {
    _disableInitializers();
  }

  //------------------------------------------------------------------------------
  // External
  //------------------------------------------------------------------------------
  /**
    @dev Make explicit the intention to revert transaction if contract is directly sent Ether
  */
  receive() external payable {
    revert CannotSendEtherDirectly();
  }

  /**
   * @dev Add a new document, reverts if document name already exists. Can emit {NewDocumentAdded}.
   * @param documentSpec the document specification
   */
  function addDocument(DocumentSpec calldata documentSpec) external onlyOwner {
    _addDocument(documentSpec);
  }

  /**
   * @dev Create multiple documents at once, reverts if any document name already exists.
   * Can emit one or more {NewDocumentAdded}.
   * @param documentSpecs array of document specifications
   */
  function addDocuments(DocumentSpec[] calldata documentSpecs) external onlyOwner {
    uint256 length = documentSpecs.length;
    if (length == 0) revert NoDocumentSpecificationsProvided();
    for (uint256 i = 0; i < length; ) {
      _addDocument(documentSpecs[i]);
      unchecked {
        i++;
      }
    }
  }

  /**
   * @dev Add a funding commitment. Can emit {NewFundingCommitmentAdded}.
   * @param fundingCommitment FundingCommitmentExternal
   */
  function addFundingCommitment(FundingCommitmentExternal calldata fundingCommitment) external onlyOwner {
    _addFundingCommitment(fundingCommitment);
  }

  /**
   * @dev Add funding commitments. Can emit one or more {NewFundingCommitmentAdded}.
   * @param fundingCommitments_ FundingCommitmentExternal[]
   */
  function addFundingCommitments(FundingCommitmentExternal[] calldata fundingCommitments_) external onlyOwner {
    uint256 length = fundingCommitments_.length;
    if (length == 0) revert NoFundingCommitmentsProvided();
    for (uint256 i = 0; i < length; ) {
      _addFundingCommitment(fundingCommitments_[i]);
      unchecked {
        i++;
      }
    }
  }

  /**
   * @dev Add funding commitments and documents. This is a helper function to reduce possible approval
   * steps and save gas. If any funding commitment or any document is not valid, the whole transaction
   * reverts. Leaving either funding commitments or documents arrays empty is fine, but not both.
   * Can emit none, one or more {NewFundingCommitmentAdded} and {NewDocumentAdded}.
   * @param fundingCommitments_ array of funding commitments
   * @param documentSpecs_ array of document specifications
   */
  function addFundingCommitmentsAndDocuments(
    FundingCommitmentExternal[] calldata fundingCommitments_,
    DocumentSpec[] calldata documentSpecs_
  ) external onlyOwner {
    uint256 fundingsLength = fundingCommitments_.length;
    uint256 docsLength = documentSpecs_.length;
    if (fundingsLength == 0 && docsLength == 0) revert NoFundingCommitmentsOrDocumentsProvided();

    // Funding commitments
    if (fundingsLength > 0) {
      for (uint256 i = 0; i < fundingsLength; ) {
        _addFundingCommitment(fundingCommitments_[i]);
        unchecked {
          i++;
        }
      }
    }

    // Documents
    if (docsLength > 0) {
      for (uint256 i = 0; i < docsLength; ) {
        _addDocument(documentSpecs_[i]);
        unchecked {
          i++;
        }
      }
    }
  }

  /**
   * @dev Add a rollover commitment. Can emit {NewRolloverCommitmentAdded}.
   * @param rolloverCommitment FundingCommitmentExternal
   */
  function addRolloverCommitment(RolloverCommitmentExternal calldata rolloverCommitment) external onlyOwner {
    _addRolloverCommitment(rolloverCommitment);
  }

  /**
   * @dev Burn an amount of bond tokens that are owned by the allow-listed sender. Equivalent of the sender doing a transfer to
   * address zero, but with the addition of reducing total supply. Can emit a {Transfer} event to address zero.
   * @param amount of bond tokens to burn
   */
  function burn(uint256 amount) public override whenNotPaused onlyAllowListed {
    super.burn(amount);
  }

  /**
   * @dev Burn an amount of bond tokens that are owned by the address `account`. Caller must have sufficient allowance.
   * Equivalent of `account` doing a transfer to address zero, but with the addition of reducing total supply. Can emit
   * a {Transfer} event to address zero.
   * @param account The account from which tokens will be burned.
   * @param amount of bond tokens to burn
   */
  function burnFrom(address account, uint256 amount) public override whenNotPaused onlyAllowListed {
    super.burnFrom(account, amount);
  }

  /**
   * @dev Get all documents. This includes all document details. We expect 2 or 3 docs per bond.
   * @return DocumentDetail[] array of document names
   */
  function getAllDocuments() external view returns (DocumentDetail[] memory) {
    uint256 length = docNameHashes.length();
    DocumentDetail[] memory docs = new DocumentDetail[](length);
    for (uint256 i = 0; i < length; ) {
      bytes32 docNameHash = docNameHashes.at(i);
      docs[i] = documents[docNameHash];
      unchecked {
        i++;
      }
    }
    return docs;
  }

  /**
   * @dev Get names of all documents. Expect 2 or 3 docs per bond.
   * @return string[] array of document names
   */
  function getAllDocumentNames() external view returns (string[] memory) {
    uint256 length = docNameHashes.length();
    string[] memory docNames = new string[](length);
    for (uint256 i = 0; i < length; ) {
      bytes32 docNameHash = docNameHashes.at(i);
      DocumentDetail memory document = documents[docNameHash];
      docNames[i] = document.docName;
      unchecked {
        i++;
      }
    }
    return docNames;
  }

  /**
   * @dev external function to get all the funding commitments
   * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
   * to mostly be used by view accessors that are queried without any gas fees.
   */
  function getAllFundingCommitment() external view returns (FundingCommitmentExternal[] memory) {
    address[] memory addressWithFundingCommitment_ = addressWithFundingCommitment.values();
    FundingCommitmentExternal[] memory fundingCommitments_ = new FundingCommitmentExternal[](
      addressWithFundingCommitment_.length
    );
    for (uint256 i = 0; i < addressWithFundingCommitment_.length; ) {
      fundingCommitments_[i] = FundingCommitmentExternal({
        address_: addressWithFundingCommitment_[i],
        fundingCommitmentInternal: fundingCommitments[addressWithFundingCommitment_[i]]
      });
      unchecked {
        i++;
      }
    }
    return fundingCommitments_;
  }

  /**
   * @dev external function to get all the rollover commitments
   * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
   * to mostly be used by view accessors that are queried without any gas fees.
   */
  function getAllRolloverCommitment() external view returns (RolloverCommitmentExternal[] memory) {
    address[] memory addressWithRolloverCommitment_ = addressWithRolloverCommitment.values();
    RolloverCommitmentExternal[] memory rolloverCommitments_ = new RolloverCommitmentExternal[](
      addressWithRolloverCommitment_.length
    );
    for (uint256 i = 0; i < addressWithRolloverCommitment_.length; ) {
      rolloverCommitments_[i] = RolloverCommitmentExternal({
        address_: addressWithRolloverCommitment_[i],
        rolloverCommitmentInternal: rolloverCommitments[addressWithRolloverCommitment_[i]]
      });
      unchecked {
        i++;
      }
    }
    return rolloverCommitments_;
  }

  /**
   * @dev Amount of asset token remaining to be repaid by the bond issuer.
   * This is a convenience function for those interacting with the bond contract outside the platform.
   * The minimum value this function can return is zero, meaning nothing is due.
   * @return assetTokenAmount remaining to be repaid by the bond issuer
   */
  function getAmountToRepay() external view returns (uint256 assetTokenAmount) {
    uint256 totalDue = _calculateAmount(totalSupply(), interestRateFraction);
    uint256 totalReceived = assetToken.balanceOf(address(this));
    if (totalDue > totalReceived) {
      return totalDue - totalReceived;
    } else {
      return 0;
    }
  }

  /**
   * @dev Get details of a document
   * @param docName name of the document
   * @return DocumentDetail document detail
   */
  function getDocument(string calldata docName) external view returns (DocumentDetail memory) {
    bytes32 docNameHash = keccak256(abi.encodePacked(docName));
    return (documents[docNameHash]);
  }

  /**
   * @dev Returns the final amount of asset tokens based on the bond token amount provided as input.
   * @param bondTokenAmount_ uint256: amount of bond token to be used to calculate the final amount
   */
  function getFinalAmount(uint256 bondTokenAmount_) external view returns (uint256) {
    return _calculateAmount(bondTokenAmount_, interestRateFraction);
  }

  /**
   * @dev Returns the final amount of asset tokens based on the bond token balance of the user.
   * @param user_ address: address of the user to be used to calculate the final amount
   */
  function getFinalAmount(address user_) external view returns (uint256) {
    return _calculateAmount(balanceOf(user_), interestRateFraction);
  }

  /**
   * @dev Returns the funding commitment for the provided user address.
   * @param userAddress address: address of the user.
   */
  function getFundingCommitment(address userAddress) external view returns (FundingCommitmentInternal memory) {
    return fundingCommitments[userAddress];
  }

  /**
   * @dev Returns the addresses of all the user that have a funding commitment.
   */
  function getFundingCommitmentInvestors() external view returns (address[] memory) {
    return addressWithFundingCommitment.values();
  }

  /**
   * @dev Returns timestamp of the earliest date that a sweep can happen
   * @return unix timestamp of sweep date
   */
  function getSweepDate() external view returns (uint64) {
    return maturityDate + sweepDelaySecondsFromMaturityDate;
  }

  /**
   * @dev Called at bond creation time to initialise a new bond
   * @param name_ string: name of the bond
   * @param symbol_ string: symbol of the bond
   * @param fundingCommitments_ FundingCommitmentExternal[]: initial funding commitment
   * @param assetTokenAddress_ address: address of the asset token for the investments
   * @param interestRateFraction_ uint64: interest rate fraction of the investment, must be initialized as a percentage with
   *        18 decimals for example: 10% => interestRateFraction_ = 10 ** 17. The interest rate fraction is not the annualised interest
   *        rate, it is already pro-rata and can be used directly to calculate the total amount to redeem. Max value is 1844% (a
   *        uint64 storing 18 decimals equivalent). Converted to uint256 during calculations.
   * @param maturityDate_ uint64: unix timestamp of the maturity date
   * @param bondIssuer_ address: address of the bond issuer which will receive the investment token
   * @param addressScreen_ address: address of the previously deployed address screening contract
   * @param sweepDate_ uint64: unix timestamp of earliest sweep date, must be at least 7 days later than maturity date
   * @param owner_ address: owner administrator of bond able to call admin functions
   * @param collateralId_ string: external id of bond, may be blank
   */
  function initialize(
    string memory name_,
    string memory symbol_,
    FundingCommitmentExternal[] memory fundingCommitments_,
    address assetTokenAddress_,
    uint64 interestRateFraction_,
    uint64 maturityDate_,
    address bondIssuer_,
    address addressScreen_,
    uint64 sweepDate_,
    address owner_,
    string memory collateralId_
  ) public virtual initializer {
    if (bondIssuer_ == address(0)) revert BondIssuerAddressZero();
    if (sweepDate_ <= maturityDate_) revert SweepDateMustBeAfterMaturity();
    if (owner_ == address(0)) revert OwnerAddressZero();
    if (bytes(name_).length == 0) revert NameCannotBeEmpty();
    if (bytes(symbol_).length == 0) revert SymbolCannotBeEmpty();
    if (assetTokenAddress_ == address(0)) revert AssetTokenAddressZero();
    if (!assetTokenAddress_.isContract()) revert AssetTokenNotContract();

    // ERC20, ERC165, owners
    __ERC20_init(name_, symbol_);
    __ERC165_init();
    _transferOwnership(owner_);
    bondIssuer = bondIssuer_;

    // Asset token, interest
    assetToken = IERC20Standard(assetTokenAddress_);
    assetTokenDecimals = assetToken.decimals();
    interestRateFraction = interestRateFraction_;

    // Dates
    _setMaturityDate(maturityDate_, REASON_INITIALIZE);
    sweepDelaySecondsFromMaturityDate = sweepDate_ - maturityDate;
    if (sweepDelaySecondsFromMaturityDate < 3 days) revert SweepDelayMustExceedLimit();

    // Address screening
    _setAddressScreenContract(addressScreen_, REASON_INITIALIZE);

    // Funding commitments
    uint256 length_ = fundingCommitments_.length;
    for (uint256 i = 0; i < length_; ) {
      _addFundingCommitment(fundingCommitments_[i]);
      unchecked {
        i++;
      }
    }

    // Bond id
    collateralId = collateralId_;
  }

  /**
   * @dev Remove the funding commitment of the specified user. Can emit {FundingCommitmentRemoved}.
   * @param userAddress address
   */
  function removeFundingCommitment(address userAddress) external onlyOwner {
    _removeFundingCommitment(userAddress);
  }

  /**
   * @dev Remove the rollover commitment of the specified user. Can emit {RolloverCommitmentRemoved}.
   * @param userAddress address
   */
  function removeRolloverCommitment(address userAddress) external onlyOwner {
    _removeRolloverCommitment(userAddress);
  }

  /**
   * @dev Remove funding commitments of the specified users. Can emit one or more {FundingCommitmentRemoved}.
   * @param userAddresses address
   */
  function removeFundingCommitments(address[] calldata userAddresses) external onlyOwner {
    uint256 length = userAddresses.length;
    for (uint256 i = 0; i < length; ) {
      _removeFundingCommitment(userAddresses[i]);
      unchecked {
        i++;
      }
    }
  }

  /**
   * @dev Checks and sets the address screening contract. Can emit {AddressScreenContractUpdated}.
   * @param newAddress new address of the screening contract
   * @param reason the reason for the change
   */
  function setAddressScreenContract(address newAddress, string calldata reason) external onlyOwner {
    _setAddressScreenContract(newAddress, reason);
  }

  /**
   * @dev Checks and sets a maturity date. Can emit {MaturityDateUpdated}.
   * @param newDate the maturity date
   * @param reason the reason for the change
   */
  function setMaturityDate(uint64 newDate, string calldata reason) external onlyOwner {
    // checks applied for external calls only (these checks do not apply during contract init)
    if (addressWithFundingCommitment.length() > 0) revert FundingCommitmentsPresent();
    _setMaturityDate(newDate, reason);
  }

  /**
   * @dev Update a funding commitment. Can emit {FundingCommitmentUpdated}.
   * @param fundingCommitment FundingCommitmentExternal
   */
  function updateFundingCommitment(FundingCommitmentExternal calldata fundingCommitment) external onlyOwner {
    _updateFundingCommitment(fundingCommitment);
  }

  /**
   * @dev Update funding commitments. Can emit one more {FundingCommitmentUpdated}.
   * @param fundingCommitments_ FundingCommitmentExternal[]
   */
  function updateFundingCommitments(FundingCommitmentExternal[] calldata fundingCommitments_) external onlyOwner {
    uint256 length = fundingCommitments_.length;
    for (uint256 i = 0; i < length; ) {
      _updateFundingCommitment(fundingCommitments_[i]);
      unchecked {
        i++;
      }
    }
  }

  /**
   * @dev Update a rollover commitment. Can emit {RolloverCommitmentUpdated}.
   * @param rolloverCommitment RolloverCommitmentExternal
   */
  function updateRolloverCommitment(RolloverCommitmentExternal calldata rolloverCommitment) external onlyOwner {
    _updateRolloverCommitment(rolloverCommitment);
  }

  //------------------------------------------------------------------------------
  // Public
  //------------------------------------------------------------------------------
  /**
   * @dev Can be called by allow listed address in order to claim the investment.
   * Can emit {Claim} if claim was successful and {Redeemed} if bond is fully redeemed.
   * @return bondTokenAmount uint256: amount of bond token claimed
   * @return assetTokenAmount uint256: amount of asset token received by the user
   */
  function claim()
    public
    virtual
    whenNotPaused
    onlyAllowListed
    returns (uint256 bondTokenAmount, uint256 assetTokenAmount)
  {
    // Checks
    bondTokenAmount = balanceOf(msg.sender);
    if (bondTokenAmount == 0) revert NoBondTokenToClaim();
    if (!isRepaidInFull()) revert ContractNotFullyRepaid();

    // Effects
    _burn(msg.sender, bondTokenAmount);
    assetTokenAmount = _calculateAmount(bondTokenAmount, interestRateFraction);

    // Interactions (safeTransfer reverts if unsuccessful)
    assetToken.safeTransfer(msg.sender, assetTokenAmount);
    // events
    emit Claim(msg.sender, bondTokenAmount, assetTokenAmount);
    if (totalSupply() == 0) {
      // all funds have been claimed, the bond is redeemed
      emit Redeemed();
    }
  }

  /**
   * @dev Return decimals for the bond token. This is the same decimals as the associated asset token.
   */
  function decimals() public view override returns (uint8) {
    return assetTokenDecimals;
  }

  /**
   * @dev Return bond issuer
   */
  function getBondIssuer() external view returns (address) {
    return bondIssuer;
  }

  /**
   * @return hasBeenRepaid bool: did the bond issuer pay back the debt in full?
   */
  function isRepaidInFull() public view virtual returns (bool) {
    uint256 totalSupply_ = totalSupply();
    if (totalSupply_ > 0) {
      // bond tokens exist, do we have enough asset token to repay everyone?
      return assetToken.balanceOf(address(this)) >= _calculateAmount(totalSupply_, interestRateFraction);
    } else {
      // no bond tokens, can only have repaid in full if no funding commitments remain
      return addressWithFundingCommitment.length() == 0;
    }
  }

  /**
   * @dev Pauses this bond contract, preventing claim, settle bond purchase, bond token transfers.
   */
  function pause() public onlyOwner {
    _pause();
  }

  /**
   * @dev Can be called by an address in the funding commitment list in order to fulfill a funding commitment.
   * Can emit {SettleBondPurchase}.
   * @return bondTokenAmount uint256: amount of new bond token minted
   * @return proceed uint256: amount of asset token sent by the user to the bond issuer
   */
  function settleBondPurchase() public virtual whenNotPaused returns (uint256 bondTokenAmount, uint256 proceed) {
    // Checks
    bondTokenAmount = fundingCommitments[msg.sender].bondTokenAmount;
    proceed = fundingCommitments[msg.sender].proceed;
    if (bondTokenAmount == 0) revert NoFundingCommitment();
    uint256 date_ = fundingCommitments[msg.sender].date;
    if (block.timestamp > date_) revert FundingCommitmentDatePassed();
    if (block.timestamp <= date_ - (24 hours)) revert FundingCommitmentTimeoutNotFinished();

    // Effects
    addressWithFundingCommitment.remove(msg.sender);
    delete fundingCommitments[msg.sender];

    // Interactions (safeTransferFrom reverts if unsuccessful)
    assetToken.safeTransferFrom(msg.sender, bondIssuer, proceed);
    _mint(msg.sender, bondTokenAmount);
    // events
    emit SettleBondPurchase(msg.sender, address(assetToken), proceed, bondTokenAmount);
  }

  /**
   * @dev Can be called by a vault contract address in the rollover commitment list in order to fulfill a rollover commitment.
   * Terminology:
   *   proceed token - vault's existing vault asset token
   *   proceed - amount of the proceed token held by the vault
   *   bond token - the token of this bond contract, destined to become the vault's new asset token
   * This function consumes all of the proceed token that is available from the sender (the vault contract). The vault sender
   * must previously have approved this bond contract be able to spend the the proceed token (vault asset token).
   * Can emit {SettleBondPurchase}.
   * @return proceedTokenAddress uint256: address of the proceed token (existing vault asset token)
   * @return proceed uint256: amount of existing vault asset token sent by the vault and burned
   * @return bondTokenAmount uint256: amount of new bond token minted
   */
  function settleBondPurchaseRollover()
    public
    virtual
    whenNotPaused
    returns (address proceedTokenAddress, uint256 proceed, uint256 bondTokenAmount)
  {
    //------------------------------------------------------------------------------
    // Checks
    //------------------------------------------------------------------------------
    // Existence of rollover commitment
    uint256 proceedTokenAmountLimit = rolloverCommitments[msg.sender].proceedTokenAmountLimit;
    if (proceedTokenAmountLimit == 0) revert NoRolloverCommitment();

    // Date
    uint256 date_ = rolloverCommitments[msg.sender].date;
    if (block.timestamp > date_) revert RolloverCommitmentDatePassed();
    if (block.timestamp <= date_ - (24 hours)) revert RolloverCommitmentTimeoutNotFinished();

    // Proceed is the balance that the vault holds of its own asset token
    proceedTokenAddress = rolloverCommitments[msg.sender].proceedTokenAddress;
    IERC20Standard proceedToken = IERC20Standard(proceedTokenAddress);
    proceed = proceedToken.balanceOf(msg.sender);

    // Check if price limit is sufficient
    if (proceed > proceedTokenAmountLimit) revert ProceedExceedsLimit();

    //------------------------------------------------------------------------------
    // Effects
    //------------------------------------------------------------------------------
    uint256 price = rolloverCommitments[msg.sender].price;
    addressWithRolloverCommitment.remove(msg.sender);
    delete rolloverCommitments[msg.sender];

    //------------------------------------------------------------------------------
    // Interactions (_mint will revert if unsuccessful)
    //------------------------------------------------------------------------------
    // Mint
    bondTokenAmount = proceed.div(price);
    _mint(msg.sender, bondTokenAmount);

    // Events
    emit SettleBondPurchase(msg.sender, proceedTokenAddress, proceed, bondTokenAmount);
  }

  /**
   * @dev Checks if the contract supports a given interface
   * @param interfaceId The interface identifier, as specified in ERC-165
   * @return bool True if the contract implements the requested interface
   */
  function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165Upgradeable) returns (bool) {
    return
      interfaceId == type(IERC20Standard).interfaceId ||
      interfaceId == type(IBondRolloverable).interfaceId ||
      super.supportsInterface(interfaceId);
  }

  /**
   * @dev Can be called by the owner in order to take off all the remaining asset token in the bond.
   * The tokens are sent to the bond issuer. Can emit {Sweep}.
   * @return transferAmount uint256: amount of asset token received by the bond issuer
   */
  function sweep() public virtual onlyOwner returns (uint256 transferAmount) {
    // Checks
    if (block.timestamp < (maturityDate + sweepDelaySecondsFromMaturityDate)) revert SweepDateNotPassed();
    transferAmount = assetToken.balanceOf(address(this));
    if (transferAmount == 0) revert NothingToSweep();
    // Effects
    emit Sweep(bondIssuer, transferAmount);
    // Interactions
    assetToken.safeTransfer(bondIssuer, transferAmount);
  }

  /**
   * @dev Can be called by the owner in order to take off any other tokens accidentally sent to the bond. This means
   * tokens other than the asset token. The tokens are sent to the bond issuer. Can emit {SweepOther}.
   * @return transferAmount uint256: amount of token received by the bond issuer
   */
  function sweepOther(address otherTokenAddress) public virtual onlyOwner returns (uint256 transferAmount) {
    // Checks
    if (otherTokenAddress == address(assetToken)) revert UseSweepForAssetToken();
    IERC20Standard otherToken = IERC20Standard(otherTokenAddress);
    transferAmount = otherToken.balanceOf(address(this));
    if (transferAmount == 0) revert NothingToSweep();
    // Effects
    emit SweepOther(bondIssuer, otherTokenAddress, transferAmount);
    // Interactions
    otherToken.safeTransfer(bondIssuer, transferAmount);
  }

  /**
   * @dev Unpauses this bond contract, allowing claim, settle bond purchase, bond token transfers.
   */
  function unpause() public onlyOwner {
    _unpause();
  }

  //------------------------------------------------------------------------------
  // Internal
  //------------------------------------------------------------------------------

  /**
   * @dev Add a new document, reverts if document name already exists. Can emit {NewDocumentAdded}.
   * @param documentSpec the document specification
   */
  function _addDocument(DocumentSpec memory documentSpec) internal {
    string memory docName = documentSpec.docName;
    if (bytes(docName).length == 0) revert InvalidDocumentName();
    if (bytes(documentSpec.uri).length == 0) revert InvalidURI();

    bytes32 docNameHash = keccak256(abi.encodePacked(docName));
    if (!docNameHashes.add(docNameHash)) revert DocumentAlreadyExists();
    documents[docNameHash] = DocumentDetail(
      docName,
      docNameHash,
      documentSpec.docHashSha256,
      block.timestamp,
      documentSpec.uri
    );
    emit NewDocumentAdded(docNameHash, docName, documentSpec.uri, documentSpec.docHashSha256);
  }

  /**
   * @dev Internal function to add a funding commitment. Can emit {NewFundingCommitmentAdded}.
   * @param fundingCommitment FundingCommitmentExternal
   */
  function _addFundingCommitment(FundingCommitmentExternal memory fundingCommitment) internal {
    if (!addressWithFundingCommitment.add(fundingCommitment.address_)) revert FundingCommitmentExists();
    _checkAndSetFundingCommitment(fundingCommitment);
    emit NewFundingCommitmentAdded(
      fundingCommitment.address_,
      fundingCommitment.fundingCommitmentInternal.bondTokenAmount,
      fundingCommitment.fundingCommitmentInternal.proceed,
      fundingCommitment.fundingCommitmentInternal.date
    );
  }

  /**
   * @dev Internal function to add a rollover commitment.
   * @param rolloverCommitment RolloverCommitmentExternal
   */
  function _addRolloverCommitment(RolloverCommitmentExternal memory rolloverCommitment) internal {
    if (!addressWithRolloverCommitment.add(rolloverCommitment.address_)) revert RolloverCommitmentExists();
    _checkAndSetRolloverCommitment(rolloverCommitment);
    emit NewRolloverCommitmentAdded(
      rolloverCommitment.address_,
      rolloverCommitment.rolloverCommitmentInternal.proceedTokenAddress,
      rolloverCommitment.rolloverCommitmentInternal.proceedTokenAmountLimit,
      rolloverCommitment.rolloverCommitmentInternal.price,
      rolloverCommitment.rolloverCommitmentInternal.date
    );
  }

  /**
   * @dev Apply transfer restrictions, this OpenZeppelin dev hook gets called inside
   * all mint, burn, transfer and transferFrom functions. Restrictions applied are:
   *  - contract must be not paused (restricts everything, transfers and minting and burning).
   *  - the spender/from/to addresses must be not on deny list.
   */
  function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual override whenNotPaused {
    super._beforeTokenTransfer(from, to, amount);
    if (addressScreen.isDenyListed(from)) revert AddressScreenDenyListedFrom();
    if (addressScreen.isDenyListed(to)) revert AddressScreenDenyListedTo();
    if (addressScreen.isDenyListed(_msgSender())) revert AddressScreenDenyListedSender();
  }

  /**
   * @dev Returns the amount plus interest
   * @param amount uint256: amount to have interest added to it
   * @param _interestRateFraction uint256: interest rate fraction to be used
   */
  function _calculateAmount(uint256 amount, uint256 _interestRateFraction) internal pure returns (uint256) {
    return (amount + amount.mul(_interestRateFraction));
  }

  /**
   * @dev Internal function to check and add or modify a funding commitment.
   * @param fundingCommitment FundingCommitmentExternal
   */
  function _checkAndSetFundingCommitment(FundingCommitmentExternal memory fundingCommitment) internal {
    if (fundingCommitment.fundingCommitmentInternal.bondTokenAmount == 0) revert BondTokenAmountMustBePositive();
    if (fundingCommitment.fundingCommitmentInternal.proceed == 0) revert ProceedAmountMustBePositive();
    if (fundingCommitment.fundingCommitmentInternal.date >= maturityDate) revert DateMustBeBeforeMaturity();
    fundingCommitments[fundingCommitment.address_] = fundingCommitment.fundingCommitmentInternal;
  }

  /**
   * @dev Internal function to check a rollover commitment.
   * @param rolloverCommitment RolloverCommitmentExternal
   */
  function _checkAndSetRolloverCommitment(RolloverCommitmentExternal memory rolloverCommitment) internal {
    // rollover commitment investor must be a vault
    if (!rolloverCommitment.address_.supportsInterface(type(IERC4626Asset).interfaceId))
      revert RolloverCommitmentAddressNotERC4626();

    // sanity check rollover commitment params
    if (rolloverCommitment.rolloverCommitmentInternal.proceedTokenAmountLimit == 0)
      revert ProceedAmountLimitNotPositive();
    if (rolloverCommitment.rolloverCommitmentInternal.proceedTokenAddress == address(0))
      revert InvalidProceedTokenAddress();
    if (rolloverCommitment.rolloverCommitmentInternal.price == 0) revert PriceMustBePositive();

    // proceed token (bond token being used to pay) must be ERC20 and have the same decimals as this bond uses
    if (
      !rolloverCommitment.rolloverCommitmentInternal.proceedTokenAddress.supportsInterface(
        type(IERC20Standard).interfaceId
      )
    ) revert ProceedTokenAddressNotERC20();
    IERC20Standard proceedToken = IERC20Standard(rolloverCommitment.rolloverCommitmentInternal.proceedTokenAddress);
    if (proceedToken.decimals() != decimals()) revert ProceedTokenDecimalsMismatch();

    // rollover can't be later than this bond's maturity
    if (rolloverCommitment.rolloverCommitmentInternal.date >= maturityDate) revert DateMustBeBeforeMaturity();

    // create rollover commitment
    rolloverCommitments[rolloverCommitment.address_] = rolloverCommitment.rolloverCommitmentInternal;
  }

  /**
   * @dev Internal function to remove the funding commitment of the specified user. Can emit {FundingCommitmentRemoved}.
   * @param userAddress address
   */
  function _removeFundingCommitment(address userAddress) internal {
    if (!addressWithFundingCommitment.remove(userAddress)) revert FundingCommitmentDoesNotExist();
    delete fundingCommitments[userAddress];
    emit FundingCommitmentRemoved(userAddress);
  }

  /**
   * @dev Internal function to remove the rollover commitment of the specified user. Can emit {RolloverCommitmentRemoved}.
   * @param userAddress address
   */
  function _removeRolloverCommitment(address userAddress) internal {
    if (!addressWithRolloverCommitment.remove(userAddress)) revert RolloverCommitmentDoesNotExist();
    delete rolloverCommitments[userAddress];
    emit RolloverCommitmentRemoved(userAddress);
  }

  /**
   * @dev Checks and sets the address screening contract. Can emit {AddressScreenContractUpdated}.
   * @param newAddress new address of the screening contract
   * @param reason the reason for the change
   */
  function _setAddressScreenContract(address newAddress, string memory reason) internal {
    if (newAddress == address(0)) revert AddressScreenAddressZero();
    if (!newAddress.isContract()) revert AddressScreenIsNotContract();
    if (newAddress == address(addressScreen)) revert NewAddressScreenMustBeDifferent();
    addressScreen = IAddressScreen(newAddress);
    emit AddressScreenContractUpdated(newAddress, reason);
  }

  /**
   * @dev Checks and sets a maturity date. Can emit {MaturityDateUpdated}.
   * @param newDate the maturity date
   * @param reason the reason for the change
   */
  function _setMaturityDate(uint64 newDate, string memory reason) internal {
    if (newDate <= block.timestamp) revert MaturityDateMustBeInFuture();
    if (newDate == maturityDate) revert NewMaturityDateMustBeDifferent();
    maturityDate = newDate;
    emit MaturityDateUpdated(newDate, reason);
  }

  /**
   * @dev Internal function to update a funding commitment. Can emit {FundingCommitmentUpdated}.
   * @param fundingCommitment FundingCommitmentExternal
   */
  function _updateFundingCommitment(FundingCommitmentExternal calldata fundingCommitment) internal {
    if (!addressWithFundingCommitment.contains(fundingCommitment.address_)) revert FundingCommitmentDoesNotExist();
    _checkAndSetFundingCommitment(fundingCommitment);
    emit FundingCommitmentUpdated(
      fundingCommitment.address_,
      fundingCommitment.fundingCommitmentInternal.bondTokenAmount,
      fundingCommitment.fundingCommitmentInternal.proceed,
      fundingCommitment.fundingCommitmentInternal.date
    );
  }

  /**
   * @dev Internal function to update a rollover commitment. Can emit {RolloverCommitmentUpdated}.
   * @param rolloverCommitment RolloverCommitmentExternal
   */
  function _updateRolloverCommitment(RolloverCommitmentExternal calldata rolloverCommitment) internal {
    if (!addressWithRolloverCommitment.contains(rolloverCommitment.address_)) revert RolloverCommitmentDoesNotExist();
    _checkAndSetRolloverCommitment(rolloverCommitment);
    emit RolloverCommitmentUpdated(
      rolloverCommitment.address_,
      rolloverCommitment.rolloverCommitmentInternal.proceedTokenAddress,
      rolloverCommitment.rolloverCommitmentInternal.proceedTokenAmountLimit,
      rolloverCommitment.rolloverCommitmentInternal.price,
      rolloverCommitment.rolloverCommitmentInternal.date
    );
  }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)

pragma solidity ^0.8.0;

import "../utils/ContextUpgradeable.sol";
import "../proxy/utils/Initializable.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract OwnableUpgradeable is Initializable, ContextUpgradeable {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    function __Ownable_init() internal onlyInitializing {
        __Ownable_init_unchained();
    }

    function __Ownable_init_unchained() internal onlyInitializing {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }

    /**
     * @dev This empty reserved space is put in place to allow future versions to add new
     * variables without shifting down storage in the inheritance chain.
     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
     */
    uint256[49] private __gap;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.1) (proxy/utils/Initializable.sol)

pragma solidity ^0.8.2;

import "../../utils/AddressUpgradeable.sol";

/**
 * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
 * behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an
 * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
 * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
 *
 * The initialization functions use a version number. Once a version number is used, it is consumed and cannot be
 * reused. This mechanism prevents re-execution of each "step" but allows the creation of new initialization steps in
 * case an upgrade adds a module that needs to be initialized.
 *
 * For example:
 *
 * [.hljs-theme-light.nopadding]
 * ```
 * contract MyToken is ERC20Upgradeable {
 *     function initialize() initializer public {
 *         __ERC20_init("MyToken", "MTK");
 *     }
 * }
 * contract MyTokenV2 is MyToken, ERC20PermitUpgradeable {
 *     function initializeV2() reinitializer(2) public {
 *         __ERC20Permit_init("MyToken");
 *     }
 * }
 * ```
 *
 * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
 * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.
 *
 * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
 * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
 *
 * [CAUTION]
 * ====
 * Avoid leaving a contract uninitialized.
 *
 * An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation
 * contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke
 * the {_disableInitializers} function in the constructor to automatically lock it when it is deployed:
 *
 * [.hljs-theme-light.nopadding]
 * ```
 * /// @custom:oz-upgrades-unsafe-allow constructor
 * constructor() {
 *     _disableInitializers();
 * }
 * ```
 * ====
 */
abstract contract Initializable {
    /**
     * @dev Indicates that the contract has been initialized.
     * @custom:oz-retyped-from bool
     */
    uint8 private _initialized;

    /**
     * @dev Indicates that the contract is in the process of being initialized.
     */
    bool private _initializing;

    /**
     * @dev Triggered when the contract has been initialized or reinitialized.
     */
    event Initialized(uint8 version);

    /**
     * @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope,
     * `onlyInitializing` functions can be used to initialize parent contracts.
     *
     * Similar to `reinitializer(1)`, except that functions marked with `initializer` can be nested in the context of a
     * constructor.
     *
     * Emits an {Initialized} event.
     */
    modifier initializer() {
        bool isTopLevelCall = !_initializing;
        require(
            (isTopLevelCall && _initialized < 1) || (!AddressUpgradeable.isContract(address(this)) && _initialized == 1),
            "Initializable: contract is already initialized"
        );
        _initialized = 1;
        if (isTopLevelCall) {
            _initializing = true;
        }
        _;
        if (isTopLevelCall) {
            _initializing = false;
            emit Initialized(1);
        }
    }

    /**
     * @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the
     * contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be
     * used to initialize parent contracts.
     *
     * A reinitializer may be used after the original initialization step. This is essential to configure modules that
     * are added through upgrades and that require initialization.
     *
     * When `version` is 1, this modifier is similar to `initializer`, except that functions marked with `reinitializer`
     * cannot be nested. If one is invoked in the context of another, execution will revert.
     *
     * Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in
     * a contract, executing them in the right order is up to the developer or operator.
     *
     * WARNING: setting the version to 255 will prevent any future reinitialization.
     *
     * Emits an {Initialized} event.
     */
    modifier reinitializer(uint8 version) {
        require(!_initializing && _initialized < version, "Initializable: contract is already initialized");
        _initialized = version;
        _initializing = true;
        _;
        _initializing = false;
        emit Initialized(version);
    }

    /**
     * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the
     * {initializer} and {reinitializer} modifiers, directly or indirectly.
     */
    modifier onlyInitializing() {
        require(_initializing, "Initializable: contract is not initializing");
        _;
    }

    /**
     * @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call.
     * Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized
     * to any version. It is recommended to use this to lock implementation contracts that are designed to be called
     * through proxies.
     *
     * Emits an {Initialized} event the first time it is successfully executed.
     */
    function _disableInitializers() internal virtual {
        require(!_initializing, "Initializable: contract is initializing");
        if (_initialized < type(uint8).max) {
            _initialized = type(uint8).max;
            emit Initialized(type(uint8).max);
        }
    }

    /**
     * @dev Returns the highest version that has been initialized. See {reinitializer}.
     */
    function _getInitializedVersion() internal view returns (uint8) {
        return _initialized;
    }

    /**
     * @dev Returns `true` if the contract is currently initializing. See {onlyInitializing}.
     */
    function _isInitializing() internal view returns (bool) {
        return _initializing;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (security/Pausable.sol)

pragma solidity ^0.8.0;

import "../utils/ContextUpgradeable.sol";
import "../proxy/utils/Initializable.sol";

/**
 * @dev Contract module which allows children to implement an emergency stop
 * mechanism that can be triggered by an authorized account.
 *
 * This module is used through inheritance. It will make available the
 * modifiers `whenNotPaused` and `whenPaused`, which can be applied to
 * the functions of your contract. Note that they will not be pausable by
 * simply including this module, only once the modifiers are put in place.
 */
abstract contract PausableUpgradeable is Initializable, ContextUpgradeable {
    /**
     * @dev Emitted when the pause is triggered by `account`.
     */
    event Paused(address account);

    /**
     * @dev Emitted when the pause is lifted by `account`.
     */
    event Unpaused(address account);

    bool private _paused;

    /**
     * @dev Initializes the contract in unpaused state.
     */
    function __Pausable_init() internal onlyInitializing {
        __Pausable_init_unchained();
    }

    function __Pausable_init_unchained() internal onlyInitializing {
        _paused = false;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is not paused.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    modifier whenNotPaused() {
        _requireNotPaused();
        _;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is paused.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    modifier whenPaused() {
        _requirePaused();
        _;
    }

    /**
     * @dev Returns true if the contract is paused, and false otherwise.
     */
    function paused() public view virtual returns (bool) {
        return _paused;
    }

    /**
     * @dev Throws if the contract is paused.
     */
    function _requireNotPaused() internal view virtual {
        require(!paused(), "Pausable: paused");
    }

    /**
     * @dev Throws if the contract is not paused.
     */
    function _requirePaused() internal view virtual {
        require(paused(), "Pausable: not paused");
    }

    /**
     * @dev Triggers stopped state.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    function _pause() internal virtual whenNotPaused {
        _paused = true;
        emit Paused(_msgSender());
    }

    /**
     * @dev Returns to normal state.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    function _unpause() internal virtual whenPaused {
        _paused = false;
        emit Unpaused(_msgSender());
    }

    /**
     * @dev This empty reserved space is put in place to allow future versions to add new
     * variables without shifting down storage in the inheritance chain.
     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
     */
    uint256[49] private __gap;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC20/ERC20.sol)

pragma solidity ^0.8.0;

import "./IERC20Upgradeable.sol";
import "./extensions/IERC20MetadataUpgradeable.sol";
import "../../utils/ContextUpgradeable.sol";
import "../../proxy/utils/Initializable.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC20
 * applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20Upgradeable is Initializable, ContextUpgradeable, IERC20Upgradeable, IERC20MetadataUpgradeable {
    mapping(address => uint256) private _balances;

    mapping(address => mapping(address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * The default value of {decimals} is 18. To select a different value for
     * {decimals} you should overload it.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    function __ERC20_init(string memory name_, string memory symbol_) internal onlyInitializing {
        __ERC20_init_unchained(name_, symbol_);
    }

    function __ERC20_init_unchained(string memory name_, string memory symbol_) internal onlyInitializing {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless this function is
     * overridden;
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual override returns (uint8) {
        return 18;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address to, uint256 amount) public virtual override returns (bool) {
        address owner = _msgSender();
        _transfer(owner, to, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on
     * `transferFrom`. This is semantically equivalent to an infinite approval.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * NOTE: Does not update the allowance if the current allowance
     * is the maximum `uint256`.
     *
     * Requirements:
     *
     * - `from` and `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     * - the caller must have allowance for ``from``'s tokens of at least
     * `amount`.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) public virtual override returns (bool) {
        address spender = _msgSender();
        _spendAllowance(from, spender, amount);
        _transfer(from, to, amount);
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, allowance(owner, spender) + addedValue);
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        address owner = _msgSender();
        uint256 currentAllowance = allowance(owner, spender);
        require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
        unchecked {
            _approve(owner, spender, currentAllowance - subtractedValue);
        }

        return true;
    }

    /**
     * @dev Moves `amount` of tokens from `from` to `to`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     */
    function _transfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {
        require(from != address(0), "ERC20: transfer from the zero address");
        require(to != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(from, to, amount);

        uint256 fromBalance = _balances[from];
        require(fromBalance >= amount, "ERC20: transfer amount exceeds balance");
        unchecked {
            _balances[from] = fromBalance - amount;
            // Overflow not possible: the sum of all balances is capped by totalSupply, and the sum is preserved by
            // decrementing then incrementing.
            _balances[to] += amount;
        }

        emit Transfer(from, to, amount);

        _afterTokenTransfer(from, to, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply += amount;
        unchecked {
            // Overflow not possible: balance + amount is at most totalSupply + amount, which is checked above.
            _balances[account] += amount;
        }
        emit Transfer(address(0), account, amount);

        _afterTokenTransfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        uint256 accountBalance = _balances[account];
        require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
        unchecked {
            _balances[account] = accountBalance - amount;
            // Overflow not possible: amount <= accountBalance <= totalSupply.
            _totalSupply -= amount;
        }

        emit Transfer(account, address(0), amount);

        _afterTokenTransfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(
        address owner,
        address spender,
        uint256 amount
    ) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Updates `owner` s allowance for `spender` based on spent `amount`.
     *
     * Does not update the allowance amount in case of infinite allowance.
     * Revert if not enough allowance is available.
     *
     * Might emit an {Approval} event.
     */
    function _spendAllowance(
        address owner,
        address spender,
        uint256 amount
    ) internal virtual {
        uint256 currentAllowance = allowance(owner, spender);
        if (currentAllowance != type(uint256).max) {
            require(currentAllowance >= amount, "ERC20: insufficient allowance");
            unchecked {
                _approve(owner, spender, currentAllowance - amount);
            }
        }
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {}

    /**
     * @dev Hook that is called after any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * has been transferred to `to`.
     * - when `from` is zero, `amount` tokens have been minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens have been burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _afterTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {}

    /**
     * @dev This empty reserved space is put in place to allow future versions to add new
     * variables without shifting down storage in the inheritance chain.
     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
     */
    uint256[45] private __gap;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC20/extensions/ERC20Burnable.sol)

pragma solidity ^0.8.0;

import "../ERC20Upgradeable.sol";
import "../../../utils/ContextUpgradeable.sol";
import "../../../proxy/utils/Initializable.sol";

/**
 * @dev Extension of {ERC20} that allows token holders to destroy both their own
 * tokens and those that they have an allowance for, in a way that can be
 * recognized off-chain (via event analysis).
 */
abstract contract ERC20BurnableUpgradeable is Initializable, ContextUpgradeable, ERC20Upgradeable {
    function __ERC20Burnable_init() internal onlyInitializing {
    }

    function __ERC20Burnable_init_unchained() internal onlyInitializing {
    }
    /**
     * @dev Destroys `amount` tokens from the caller.
     *
     * See {ERC20-_burn}.
     */
    function burn(uint256 amount) public virtual {
        _burn(_msgSender(), amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, deducting from the caller's
     * allowance.
     *
     * See {ERC20-_burn} and {ERC20-allowance}.
     *
     * Requirements:
     *
     * - the caller must have allowance for ``accounts``'s tokens of at least
     * `amount`.
     */
    function burnFrom(address account, uint256 amount) public virtual {
        _spendAllowance(account, _msgSender(), amount);
        _burn(account, amount);
    }

    /**
     * @dev This empty reserved space is put in place to allow future versions to add new
     * variables without shifting down storage in the inheritance chain.
     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
     */
    uint256[50] private __gap;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.0;

import "../IERC20Upgradeable.sol";

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 *
 * _Available since v4.1._
 */
interface IERC20MetadataUpgradeable is IERC20Upgradeable {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20Upgradeable {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library AddressUpgradeable {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;
import "../proxy/utils/Initializable.sol";

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract ContextUpgradeable is Initializable {
    function __Context_init() internal onlyInitializing {
    }

    function __Context_init_unchained() internal onlyInitializing {
    }
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    /**
     * @dev This empty reserved space is put in place to allow future versions to add new
     * variables without shifting down storage in the inheritance chain.
     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
     */
    uint256[50] private __gap;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)

pragma solidity ^0.8.0;

import "./IERC165Upgradeable.sol";
import "../../proxy/utils/Initializable.sol";

/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 *
 * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
 */
abstract contract ERC165Upgradeable is Initializable, IERC165Upgradeable {
    function __ERC165_init() internal onlyInitializing {
    }

    function __ERC165_init_unchained() internal onlyInitializing {
    }
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IERC165Upgradeable).interfaceId;
    }

    /**
     * @dev This empty reserved space is put in place to allow future versions to add new
     * variables without shifting down storage in the inheritance chain.
     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
     */
    uint256[50] private __gap;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165Upgradeable {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";
import "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    function safeTransfer(
        IERC20 token,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(
        IERC20 token,
        address from,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender) + value;
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            uint256 newAllowance = oldAllowance - value;
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) {
            // Return data is optional
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Address.sol)

pragma solidity ^0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        assembly {
            size := extcodesize(account)
        }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165Checker.sol)

pragma solidity ^0.8.0;

import "./IERC165.sol";

/**
 * @dev Library used to query support of an interface declared via {IERC165}.
 *
 * Note that these functions return the actual result of the query: they do not
 * `revert` if an interface is not supported. It is up to the caller to decide
 * what to do in these cases.
 */
library ERC165Checker {
    // As per the EIP-165 spec, no interface should ever match 0xffffffff
    bytes4 private constant _INTERFACE_ID_INVALID = 0xffffffff;

    /**
     * @dev Returns true if `account` supports the {IERC165} interface,
     */
    function supportsERC165(address account) internal view returns (bool) {
        // Any contract that implements ERC165 must explicitly indicate support of
        // InterfaceId_ERC165 and explicitly indicate non-support of InterfaceId_Invalid
        return
            _supportsERC165Interface(account, type(IERC165).interfaceId) &&
            !_supportsERC165Interface(account, _INTERFACE_ID_INVALID);
    }

    /**
     * @dev Returns true if `account` supports the interface defined by
     * `interfaceId`. Support for {IERC165} itself is queried automatically.
     *
     * See {IERC165-supportsInterface}.
     */
    function supportsInterface(address account, bytes4 interfaceId) internal view returns (bool) {
        // query support of both ERC165 as per the spec and support of _interfaceId
        return supportsERC165(account) && _supportsERC165Interface(account, interfaceId);
    }

    /**
     * @dev Returns a boolean array where each value corresponds to the
     * interfaces passed in and whether they're supported or not. This allows
     * you to batch check interfaces for a contract where your expectation
     * is that some interfaces may not be supported.
     *
     * See {IERC165-supportsInterface}.
     *
     * _Available since v3.4._
     */
    function getSupportedInterfaces(address account, bytes4[] memory interfaceIds)
        internal
        view
        returns (bool[] memory)
    {
        // an array of booleans corresponding to interfaceIds and whether they're supported or not
        bool[] memory interfaceIdsSupported = new bool[](interfaceIds.length);

        // query support of ERC165 itself
        if (supportsERC165(account)) {
            // query support of each interface in interfaceIds
            for (uint256 i = 0; i < interfaceIds.length; i++) {
                interfaceIdsSupported[i] = _supportsERC165Interface(account, interfaceIds[i]);
            }
        }

        return interfaceIdsSupported;
    }

    /**
     * @dev Returns true if `account` supports all the interfaces defined in
     * `interfaceIds`. Support for {IERC165} itself is queried automatically.
     *
     * Batch-querying can lead to gas savings by skipping repeated checks for
     * {IERC165} support.
     *
     * See {IERC165-supportsInterface}.
     */
    function supportsAllInterfaces(address account, bytes4[] memory interfaceIds) internal view returns (bool) {
        // query support of ERC165 itself
        if (!supportsERC165(account)) {
            return false;
        }

        // query support of each interface in _interfaceIds
        for (uint256 i = 0; i < interfaceIds.length; i++) {
            if (!_supportsERC165Interface(account, interfaceIds[i])) {
                return false;
            }
        }

        // all interfaces supported
        return true;
    }

    /**
     * @notice Query if a contract implements an interface, does not check ERC165 support
     * @param account The address of the contract to query for support of an interface
     * @param interfaceId The interface identifier, as specified in ERC-165
     * @return true if the contract at account indicates support of the interface with
     * identifier interfaceId, false otherwise
     * @dev Assumes that account contains a contract that supports ERC165, otherwise
     * the behavior of this method is undefined. This precondition can be checked
     * with {supportsERC165}.
     * Interface identification is specified in ERC-165.
     */
    function _supportsERC165Interface(address account, bytes4 interfaceId) private view returns (bool) {
        bytes memory encodedParams = abi.encodeWithSelector(IERC165.supportsInterface.selector, interfaceId);
        (bool success, bytes memory result) = account.staticcall{gas: 30000}(encodedParams);
        if (result.length < 32) return false;
        return success && abi.decode(result, (bool));
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/math/SafeCast.sol)

pragma solidity ^0.8.0;

/**
 * @dev Wrappers over Solidity's uintXX/intXX casting operators with added overflow
 * checks.
 *
 * Downcasting from uint256/int256 in Solidity does not revert on overflow. This can
 * easily result in undesired exploitation or bugs, since developers usually
 * assume that overflows raise errors. `SafeCast` restores this intuition by
 * reverting the transaction when such an operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 *
 * Can be combined with {SafeMath} and {SignedSafeMath} to extend it to smaller types, by performing
 * all math on `uint256` and `int256` and then downcasting.
 */
library SafeCast {
    /**
     * @dev Returns the downcasted uint224 from uint256, reverting on
     * overflow (when the input is greater than largest uint224).
     *
     * Counterpart to Solidity's `uint224` operator.
     *
     * Requirements:
     *
     * - input must fit into 224 bits
     */
    function toUint224(uint256 value) internal pure returns (uint224) {
        require(value <= type(uint224).max, "SafeCast: value doesn't fit in 224 bits");
        return uint224(value);
    }

    /**
     * @dev Returns the downcasted uint128 from uint256, reverting on
     * overflow (when the input is greater than largest uint128).
     *
     * Counterpart to Solidity's `uint128` operator.
     *
     * Requirements:
     *
     * - input must fit into 128 bits
     */
    function toUint128(uint256 value) internal pure returns (uint128) {
        require(value <= type(uint128).max, "SafeCast: value doesn't fit in 128 bits");
        return uint128(value);
    }

    /**
     * @dev Returns the downcasted uint96 from uint256, reverting on
     * overflow (when the input is greater than largest uint96).
     *
     * Counterpart to Solidity's `uint96` operator.
     *
     * Requirements:
     *
     * - input must fit into 96 bits
     */
    function toUint96(uint256 value) internal pure returns (uint96) {
        require(value <= type(uint96).max, "SafeCast: value doesn't fit in 96 bits");
        return uint96(value);
    }

    /**
     * @dev Returns the downcasted uint64 from uint256, reverting on
     * overflow (when the input is greater than largest uint64).
     *
     * Counterpart to Solidity's `uint64` operator.
     *
     * Requirements:
     *
     * - input must fit into 64 bits
     */
    function toUint64(uint256 value) internal pure returns (uint64) {
        require(value <= type(uint64).max, "SafeCast: value doesn't fit in 64 bits");
        return uint64(value);
    }

    /**
     * @dev Returns the downcasted uint32 from uint256, reverting on
     * overflow (when the input is greater than largest uint32).
     *
     * Counterpart to Solidity's `uint32` operator.
     *
     * Requirements:
     *
     * - input must fit into 32 bits
     */
    function toUint32(uint256 value) internal pure returns (uint32) {
        require(value <= type(uint32).max, "SafeCast: value doesn't fit in 32 bits");
        return uint32(value);
    }

    /**
     * @dev Returns the downcasted uint16 from uint256, reverting on
     * overflow (when the input is greater than largest uint16).
     *
     * Counterpart to Solidity's `uint16` operator.
     *
     * Requirements:
     *
     * - input must fit into 16 bits
     */
    function toUint16(uint256 value) internal pure returns (uint16) {
        require(value <= type(uint16).max, "SafeCast: value doesn't fit in 16 bits");
        return uint16(value);
    }

    /**
     * @dev Returns the downcasted uint8 from uint256, reverting on
     * overflow (when the input is greater than largest uint8).
     *
     * Counterpart to Solidity's `uint8` operator.
     *
     * Requirements:
     *
     * - input must fit into 8 bits.
     */
    function toUint8(uint256 value) internal pure returns (uint8) {
        require(value <= type(uint8).max, "SafeCast: value doesn't fit in 8 bits");
        return uint8(value);
    }

    /**
     * @dev Converts a signed int256 into an unsigned uint256.
     *
     * Requirements:
     *
     * - input must be greater than or equal to 0.
     */
    function toUint256(int256 value) internal pure returns (uint256) {
        require(value >= 0, "SafeCast: value must be positive");
        return uint256(value);
    }

    /**
     * @dev Returns the downcasted int128 from int256, reverting on
     * overflow (when the input is less than smallest int128 or
     * greater than largest int128).
     *
     * Counterpart to Solidity's `int128` operator.
     *
     * Requirements:
     *
     * - input must fit into 128 bits
     *
     * _Available since v3.1._
     */
    function toInt128(int256 value) internal pure returns (int128) {
        require(value >= type(int128).min && value <= type(int128).max, "SafeCast: value doesn't fit in 128 bits");
        return int128(value);
    }

    /**
     * @dev Returns the downcasted int64 from int256, reverting on
     * overflow (when the input is less than smallest int64 or
     * greater than largest int64).
     *
     * Counterpart to Solidity's `int64` operator.
     *
     * Requirements:
     *
     * - input must fit into 64 bits
     *
     * _Available since v3.1._
     */
    function toInt64(int256 value) internal pure returns (int64) {
        require(value >= type(int64).min && value <= type(int64).max, "SafeCast: value doesn't fit in 64 bits");
        return int64(value);
    }

    /**
     * @dev Returns the downcasted int32 from int256, reverting on
     * overflow (when the input is less than smallest int32 or
     * greater than largest int32).
     *
     * Counterpart to Solidity's `int32` operator.
     *
     * Requirements:
     *
     * - input must fit into 32 bits
     *
     * _Available since v3.1._
     */
    function toInt32(int256 value) internal pure returns (int32) {
        require(value >= type(int32).min && value <= type(int32).max, "SafeCast: value doesn't fit in 32 bits");
        return int32(value);
    }

    /**
     * @dev Returns the downcasted int16 from int256, reverting on
     * overflow (when the input is less than smallest int16 or
     * greater than largest int16).
     *
     * Counterpart to Solidity's `int16` operator.
     *
     * Requirements:
     *
     * - input must fit into 16 bits
     *
     * _Available since v3.1._
     */
    function toInt16(int256 value) internal pure returns (int16) {
        require(value >= type(int16).min && value <= type(int16).max, "SafeCast: value doesn't fit in 16 bits");
        return int16(value);
    }

    /**
     * @dev Returns the downcasted int8 from int256, reverting on
     * overflow (when the input is less than smallest int8 or
     * greater than largest int8).
     *
     * Counterpart to Solidity's `int8` operator.
     *
     * Requirements:
     *
     * - input must fit into 8 bits.
     *
     * _Available since v3.1._
     */
    function toInt8(int256 value) internal pure returns (int8) {
        require(value >= type(int8).min && value <= type(int8).max, "SafeCast: value doesn't fit in 8 bits");
        return int8(value);
    }

    /**
     * @dev Converts an unsigned uint256 into a signed int256.
     *
     * Requirements:
     *
     * - input must be less than or equal to maxInt256.
     */
    function toInt256(uint256 value) internal pure returns (int256) {
        // Note: Unsafe cast below is okay because `type(int256).max` is guaranteed to be positive
        require(value <= uint256(type(int256).max), "SafeCast: value doesn't fit in an int256");
        return int256(value);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/structs/EnumerableSet.sol)

pragma solidity ^0.8.0;

/**
 * @dev Library for managing
 * https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
 * types.
 *
 * Sets have the following properties:
 *
 * - Elements are added, removed, and checked for existence in constant time
 * (O(1)).
 * - Elements are enumerated in O(n). No guarantees are made on the ordering.
 *
 * ```
 * contract Example {
 *     // Add the library methods
 *     using EnumerableSet for EnumerableSet.AddressSet;
 *
 *     // Declare a set state variable
 *     EnumerableSet.AddressSet private mySet;
 * }
 * ```
 *
 * As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
 * and `uint256` (`UintSet`) are supported.
 */
library EnumerableSet {
    // To implement this library for multiple types with as little code
    // repetition as possible, we write it in terms of a generic Set type with
    // bytes32 values.
    // The Set implementation uses private functions, and user-facing
    // implementations (such as AddressSet) are just wrappers around the
    // underlying Set.
    // This means that we can only create new EnumerableSets for types that fit
    // in bytes32.

    struct Set {
        // Storage of set values
        bytes32[] _values;
        // Position of the value in the `values` array, plus 1 because index 0
        // means a value is not in the set.
        mapping(bytes32 => uint256) _indexes;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function _add(Set storage set, bytes32 value) private returns (bool) {
        if (!_contains(set, value)) {
            set._values.push(value);
            // The value is stored at length-1, but we add 1 to all indexes
            // and use 0 as a sentinel value
            set._indexes[value] = set._values.length;
            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function _remove(Set storage set, bytes32 value) private returns (bool) {
        // We read and store the value's index to prevent multiple reads from the same storage slot
        uint256 valueIndex = set._indexes[value];

        if (valueIndex != 0) {
            // Equivalent to contains(set, value)
            // To delete an element from the _values array in O(1), we swap the element to delete with the last one in
            // the array, and then remove the last element (sometimes called as 'swap and pop').
            // This modifies the order of the array, as noted in {at}.

            uint256 toDeleteIndex = valueIndex - 1;
            uint256 lastIndex = set._values.length - 1;

            if (lastIndex != toDeleteIndex) {
                bytes32 lastvalue = set._values[lastIndex];

                // Move the last value to the index where the value to delete is
                set._values[toDeleteIndex] = lastvalue;
                // Update the index for the moved value
                set._indexes[lastvalue] = valueIndex; // Replace lastvalue's index to valueIndex
            }

            // Delete the slot where the moved value was stored
            set._values.pop();

            // Delete the index for the deleted slot
            delete set._indexes[value];

            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function _contains(Set storage set, bytes32 value) private view returns (bool) {
        return set._indexes[value] != 0;
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function _length(Set storage set) private view returns (uint256) {
        return set._values.length;
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function _at(Set storage set, uint256 index) private view returns (bytes32) {
        return set._values[index];
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function _values(Set storage set) private view returns (bytes32[] memory) {
        return set._values;
    }

    // Bytes32Set

    struct Bytes32Set {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _add(set._inner, value);
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _remove(set._inner, value);
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
        return _contains(set._inner, value);
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(Bytes32Set storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
        return _at(set._inner, index);
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(Bytes32Set storage set) internal view returns (bytes32[] memory) {
        return _values(set._inner);
    }

    // AddressSet

    struct AddressSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(AddressSet storage set, address value) internal returns (bool) {
        return _add(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(AddressSet storage set, address value) internal returns (bool) {
        return _remove(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(AddressSet storage set, address value) internal view returns (bool) {
        return _contains(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(AddressSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(AddressSet storage set, uint256 index) internal view returns (address) {
        return address(uint160(uint256(_at(set._inner, index))));
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(AddressSet storage set) internal view returns (address[] memory) {
        bytes32[] memory store = _values(set._inner);
        address[] memory result;

        assembly {
            result := store
        }

        return result;
    }

    // UintSet

    struct UintSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(UintSet storage set, uint256 value) internal returns (bool) {
        return _add(set._inner, bytes32(value));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(UintSet storage set, uint256 value) internal returns (bool) {
        return _remove(set._inner, bytes32(value));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(UintSet storage set, uint256 value) internal view returns (bool) {
        return _contains(set._inner, bytes32(value));
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function length(UintSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(UintSet storage set, uint256 index) internal view returns (uint256) {
        return uint256(_at(set._inner, index));
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(UintSet storage set) internal view returns (uint256[] memory) {
        bytes32[] memory store = _values(set._inner);
        uint256[] memory result;

        assembly {
            result := store
        }

        return result;
    }
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.15;

/**
 * @title IAddressScreen
 * @dev Interface that the address screening contract exposes to consumers.
 */
interface IAddressScreen {
  /**
   * @dev Return true if the address is allow listed, false otherwise.
   * @param addr address
   */
  function isAllowListed(address addr) external view returns (bool);

  /**
   * @dev Returns true if the address is deny listed, false otherwise.
   * @param addr address
   */
  function isDenyListed(address addr) external view returns (bool);
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.15;

interface IBondRolloverable {
  function getBondIssuer() external view returns (address);

  function settleBondPurchaseRollover()
    external
    returns (address proceedTokenAddress, uint256 proceed, uint256 bondTokenAmount);
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.15;

interface IERC20Burnable {  
  function burn(uint256 amount) external;
  function burnFrom(address account, uint256 amount) external;
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.15;

import {IERC20} from "@openzeppelin/contracts/token/ERC20/IERC20.sol";

interface IERC20Standard is IERC20 {
  function decimals() external view returns (uint8);
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.15;

/**
 * @title IERC4626Asset
 * @dev Interface for ERC-4626 vault asset
 */
interface IERC4626Asset {
  /**
   * @notice Returns the address of the underlying asset token used by the vault.
   * @dev This function is a part of the ERC-4626 standard.
   * @return assetTokenAddress The address of the underlying asset token.
   */
  function asset() external view returns (address assetTokenAddress);      
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.15;

import {SafeCast} from "@openzeppelin/contracts/utils/math/SafeCast.sol";

/**
 * @title PreciseUnitMath
 *
 * Arithmetic for fixed-point numbers with 18 decimals of precision. Some functions taken from
 * dYdX's BaseMath library.
 *
 */
library PreciseUnitMath {
  using SafeCast for int256;

  // The number One in precise units.
  uint256 internal constant PRECISE_UNIT = 10 ** 18;
  int256 internal constant PRECISE_UNIT_INT = 10 ** 18;

  // Max unsigned integer value
  uint256 internal constant MAX_UINT_256 = type(uint256).max;
  // Max and min signed integer value
  int256 internal constant MAX_INT_256 = type(int256).max;
  int256 internal constant MIN_INT_256 = type(int256).min;

  /**
   * @dev Getter function since constants can't be read directly from libraries.
   */
  function preciseUnit() internal pure returns (uint256) {
    return PRECISE_UNIT;
  }

  /**
   * @dev Getter function since constants can't be read directly from libraries.
   */
  function preciseUnitInt() internal pure returns (int256) {
    return PRECISE_UNIT_INT;
  }

  /**
   * @dev Getter function since constants can't be read directly from libraries.
   */
  function maxUint256() internal pure returns (uint256) {
    return MAX_UINT_256;
  }

  /**
   * @dev Getter function since constants can't be read directly from libraries.
   */
  function maxInt256() internal pure returns (int256) {
    return MAX_INT_256;
  }

  /**
   * @dev Getter function since constants can't be read directly from libraries.
   */
  function minInt256() internal pure returns (int256) {
    return MIN_INT_256;
  }

  /**
   * @dev Multiplies value a by value b (result is rounded down). It's assumed that the value b is the significand
   * of a number with 18 decimals precision.
   */
  function mul(uint256 a, uint256 b) internal pure returns (uint256) {
    return (a * b) / PRECISE_UNIT;
  }

  /**
   * @dev Multiplies value a by value b (result is rounded towards zero). It's assumed that the value b is the
   * significand of a number with 18 decimals precision.
   */
  function mul(int256 a, int256 b) internal pure returns (int256) {
    return (a * b) / PRECISE_UNIT_INT;
  }

  /**
   * @dev Multiplies value a by value b (result is rounded up). It's assumed that the value b is the significand
   * of a number with 18 decimals precision.
   */
  function mulCeil(uint256 a, uint256 b) internal pure returns (uint256) {
    if (a == 0 || b == 0) {
      return 0;
    }
    return (a * b - 1) / PRECISE_UNIT + 1;
  }

  /**
   * @dev Divides value a by value b (result is rounded down).
   */
  function div(uint256 a, uint256 b) internal pure returns (uint256) {
    return (a * PRECISE_UNIT) / b;
  }

  /**
   * @dev Divides value a by value b (result is rounded towards 0).
   */
  function div(int256 a, int256 b) internal pure returns (int256) {
    return (a * PRECISE_UNIT_INT) / b;
  }

  /**
   * @dev Divides value a by value b (result is rounded up or away from 0).
   */
  function divCeil(uint256 a, uint256 b) internal pure returns (uint256) {
    require(b != 0, "Cant divide by 0");

    return a > 0 ? (a * PRECISE_UNIT - 1) / b + 1 : 0;
  }

  /**
   * @dev Divides value a by value b (result is rounded up or away from 0). When `a` is 0, 0 is
   * returned. When `b` is 0, method reverts with divide-by-zero error.
   */
  function divCeil(int256 a, int256 b) internal pure returns (int256) {
    require(b != 0, "Cant divide by 0");

    a = a * PRECISE_UNIT_INT;
    int256 c = a / b;

    if (a % b != 0) {
      // a ^ b == 0 case is covered by the previous if statement, hence it won't resolve to --c
      (a ^ b > 0) ? ++c : --c;
    }

    return c;
  }

  /**
   * @dev Divides value a by value b (result is rounded down - positive numbers toward 0 and negative away from 0).
   */
  function divDown(int256 a, int256 b) internal pure returns (int256) {
    require(b != 0, "Cant divide by 0");
    require(a != MIN_INT_256 || b != -1, "Invalid input");

    int256 result = a / b;
    if (a ^ b < 0 && a % b != 0) {
      result -= 1;
    }

    return result;
  }

  /**
   * @dev Multiplies value a by value b where rounding is towards the lesser number.
   * (positive values are rounded towards zero and negative values are rounded away from 0).
   */
  function conservativeMul(int256 a, int256 b) internal pure returns (int256) {
    return divDown(a * b, PRECISE_UNIT_INT);
  }

  /**
   * @dev Divides value a by value b where rounding is towards the lesser number.
   * (positive values are rounded towards zero and negative values are rounded away from 0).
   */
  function conservativeDiv(int256 a, int256 b) internal pure returns (int256) {
    return divDown(a * PRECISE_UNIT_INT, b);
  }

  /**
   * @dev Performs the power on a specified value, reverts on overflow.
   */
  function safePower(uint256 a, uint256 pow) internal pure returns (uint256) {
    require(a > 0, "Value must be positive");

    uint256 result = 1;
    for (uint256 i = 0; i < pow; i++) {
      uint256 previousResult = result;

      result = previousResult * a;
    }

    return result;
  }

  /**
   * @dev Returns true if a =~ b within range, false otherwise.
   */
  function approximatelyEquals(uint256 a, uint256 b, uint256 range) internal pure returns (bool) {
    return a <= b + range && a >= b - range;
  }

  /**
   * Returns the absolute value of int256 `a` as a uint256
   */
  function abs(int256 a) internal pure returns (uint256) {
    return a >= 0 ? a.toUint256() : (a * -1).toUint256();
  }

  /**
   * Returns the negation of a
   */
  function neg(int256 a) internal pure returns (int256) {
    require(a > MIN_INT_256, "Inversion overflow");
    return -a;
  }
}

{
  "optimizer": {
    "enabled": true,
    "runs": 1
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "libraries": {}
}

[{"inputs":[],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[],"name":"AddressScreenAddressZero","type":"error"},{"inputs":[],"name":"AddressScreenDenyListedFrom","type":"error"},{"inputs":[],"name":"AddressScreenDenyListedSender","type":"error"},{"inputs":[],"name":"AddressScreenDenyListedTo","type":"error"},{"inputs":[],"name":"AddressScreenIsNotContract","type":"error"},{"inputs":[],"name":"AssetTokenAddressZero","type":"error"},{"inputs":[],"name":"AssetTokenNotContract","type":"error"},{"inputs":[],"name":"BondIssuerAddressZero","type":"error"},{"inputs":[],"name":"BondTokenAmountMustBePositive","type":"error"},{"inputs":[],"name":"CallerNotAllowListed","type":"error"},{"inputs":[],"name":"CannotSendEtherDirectly","type":"error"},{"inputs":[],"name":"ContractNotFullyRepaid","type":"error"},{"inputs":[],"name":"DateMustBeBeforeMaturity","type":"error"},{"inputs":[],"name":"DocumentAlreadyExists","type":"error"},{"inputs":[],"name":"FundingCommitmentDatePassed","type":"error"},{"inputs":[],"name":"FundingCommitmentDoesNotExist","type":"error"},{"inputs":[],"name":"FundingCommitmentExists","type":"error"},{"inputs":[],"name":"FundingCommitmentTimeoutNotFinished","type":"error"},{"inputs":[],"name":"FundingCommitmentsPresent","type":"error"},{"inputs":[],"name":"InvalidDocumentName","type":"error"},{"inputs":[],"name":"InvalidProceedTokenAddress","type":"error"},{"inputs":[],"name":"InvalidURI","type":"error"},{"inputs":[],"name":"MaturityDateMustBeInFuture","type":"error"},{"inputs":[],"name":"NameCannotBeEmpty","type":"error"},{"inputs":[],"name":"NewAddressScreenMustBeDifferent","type":"error"},{"inputs":[],"name":"NewMaturityDateMustBeDifferent","type":"error"},{"inputs":[],"name":"NoBondTokenToClaim","type":"error"},{"inputs":[],"name":"NoDocumentSpecificationsProvided","type":"error"},{"inputs":[],"name":"NoFundingCommitment","type":"error"},{"inputs":[],"name":"NoFundingCommitmentsOrDocumentsProvided","type":"error"},{"inputs":[],"name":"NoFundingCommitmentsProvided","type":"error"},{"inputs":[],"name":"NoRolloverCommitment","type":"error"},{"inputs":[],"name":"NothingToSweep","type":"error"},{"inputs":[],"name":"OwnerAddressZero","type":"error"},{"inputs":[],"name":"PriceMustBePositive","type":"error"},{"inputs":[],"name":"ProceedAmountLimitNotPositive","type":"error"},{"inputs":[],"name":"ProceedAmountMustBePositive","type":"error"},{"inputs":[],"name":"ProceedExceedsLimit","type":"error"},{"inputs":[],"name":"ProceedTokenAddressNotERC20","type":"error"},{"inputs":[],"name":"ProceedTokenDecimalsMismatch","type":"error"},{"inputs":[],"name":"RolloverCommitmentAddressNotERC4626","type":"error"},{"inputs":[],"name":"RolloverCommitmentDatePassed","type":"error"},{"inputs":[],"name":"RolloverCommitmentDoesNotExist","type":"error"},{"inputs":[],"name":"RolloverCommitmentExists","type":"error"},{"inputs":[],"name":"RolloverCommitmentTimeoutNotFinished","type":"error"},{"inputs":[],"name":"SweepDateMustBeAfterMaturity","type":"error"},{"inputs":[],"name":"SweepDateNotPassed","type":"error"},{"inputs":[],"name":"SweepDelayMustExceedLimit","type":"error"},{"inputs":[],"name":"SymbolCannotBeEmpty","type":"error"},{"inputs":[],"name":"UseSweepForAssetToken","type":"error"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"newAddress","type":"address"},{"indexed":false,"internalType":"string","name":"reason","type":"string"}],"name":"AddressScreenContractUpdated","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"spender","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"addr","type":"address"},{"indexed":false,"internalType":"uint256","name":"bondTokenAmount","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"assetTokenAmount","type":"uint256"}],"name":"Claim","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"addr","type":"address"}],"name":"FundingCommitmentRemoved","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"addr","type":"address"},{"indexed":false,"internalType":"uint256","name":"bondTokenAmount","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"proceed","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"date","type":"uint256"}],"name":"FundingCommitmentUpdated","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint8","name":"version","type":"uint8"}],"name":"Initialized","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint64","name":"newDate","type":"uint64"},{"indexed":false,"internalType":"string","name":"reason","type":"string"}],"name":"MaturityDateUpdated","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"docNameHash","type":"bytes32"},{"indexed":false,"internalType":"string","name":"docName","type":"string"},{"indexed":false,"internalType":"string","name":"uri","type":"string"},{"indexed":false,"internalType":"bytes32","name":"docHashSha256","type":"bytes32"}],"name":"NewDocumentAdded","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"addr","type":"address"},{"indexed":false,"internalType":"uint256","name":"bondTokenAmount","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"proceed","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"date","type":"uint256"}],"name":"NewFundingCommitmentAdded","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"addr","type":"address"},{"indexed":true,"internalType":"address","name":"proceedTokenAddress","type":"address"},{"indexed":false,"internalType":"uint256","name":"proceedTokenAmountLimit","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"price","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"date","type":"uint256"}],"name":"NewRolloverCommitmentAdded","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"account","type":"address"}],"name":"Paused","type":"event"},{"anonymous":false,"inputs":[],"name":"Redeemed","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"addr","type":"address"}],"name":"RolloverCommitmentRemoved","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"addr","type":"address"},{"indexed":true,"internalType":"address","name":"proceedTokenAddress","type":"address"},{"indexed":false,"internalType":"uint256","name":"proceedTokenAmountLimit","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"price","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"date","type":"uint256"}],"name":"RolloverCommitmentUpdated","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"addr","type":"address"},{"indexed":true,"internalType":"address","name":"proceedTokenAddress","type":"address"},{"indexed":false,"internalType":"uint256","name":"proceed","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"bondTokenAmount","type":"uint256"}],"name":"SettleBondPurchase","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"addr","type":"address"},{"indexed":false,"internalType":"uint256","name":"assetTokenAmount","type":"uint256"}],"name":"Sweep","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"addr","type":"address"},{"indexed":false,"internalType":"address","name":"otherTokenAddress","type":"address"},{"indexed":false,"internalType":"uint256","name":"otherTokenAmount","type":"uint256"}],"name":"SweepOther","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Transfer","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"account","type":"address"}],"name":"Unpaused","type":"event"},{"inputs":[],"name":"BOND_TYPE","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"VERSION","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[{"components":[{"internalType":"string","name":"docName","type":"string"},{"internalType":"bytes32","name":"docHashSha256","type":"bytes32"},{"internalType":"string","name":"uri","type":"string"}],"internalType":"struct PV01SinglePaymentBondV2.DocumentSpec","name":"documentSpec","type":"tuple"}],"name":"addDocument","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"components":[{"internalType":"string","name":"docName","type":"string"},{"internalType":"bytes32","name":"docHashSha256","type":"bytes32"},{"internalType":"string","name":"uri","type":"string"}],"internalType":"struct PV01SinglePaymentBondV2.DocumentSpec[]","name":"documentSpecs","type":"tuple[]"}],"name":"addDocuments","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"components":[{"internalType":"address","name":"address_","type":"address"},{"components":[{"internalType":"uint256","name":"bondTokenAmount","type":"uint256"},{"internalType":"uint256","name":"proceed","type":"uint256"},{"internalType":"uint256","name":"date","type":"uint256"}],"internalType":"struct PV01SinglePaymentBondV2.FundingCommitmentInternal","name":"fundingCommitmentInternal","type":"tuple"}],"internalType":"struct PV01SinglePaymentBondV2.FundingCommitmentExternal","name":"fundingCommitment","type":"tuple"}],"name":"addFundingCommitment","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"components":[{"internalType":"address","name":"address_","type":"address"},{"components":[{"internalType":"uint256","name":"bondTokenAmount","type":"uint256"},{"internalType":"uint256","name":"proceed","type":"uint256"},{"internalType":"uint256","name":"date","type":"uint256"}],"internalType":"struct PV01SinglePaymentBondV2.FundingCommitmentInternal","name":"fundingCommitmentInternal","type":"tuple"}],"internalType":"struct PV01SinglePaymentBondV2.FundingCommitmentExternal[]","name":"fundingCommitments_","type":"tuple[]"}],"name":"addFundingCommitments","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"components":[{"internalType":"address","name":"address_","type":"address"},{"components":[{"internalType":"uint256","name":"bondTokenAmount","type":"uint256"},{"internalType":"uint256","name":"proceed","type":"uint256"},{"internalType":"uint256","name":"date","type":"uint256"}],"internalType":"struct PV01SinglePaymentBondV2.FundingCommitmentInternal","name":"fundingCommitmentInternal","type":"tuple"}],"internalType":"struct PV01SinglePaymentBondV2.FundingCommitmentExternal[]","name":"fundingCommitments_","type":"tuple[]"},{"components":[{"internalType":"string","name":"docName","type":"string"},{"internalType":"bytes32","name":"docHashSha256","type":"bytes32"},{"internalType":"string","name":"uri","type":"string"}],"internalType":"struct PV01SinglePaymentBondV2.DocumentSpec[]","name":"documentSpecs_","type":"tuple[]"}],"name":"addFundingCommitmentsAndDocuments","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"components":[{"internalType":"address","name":"address_","type":"address"},{"components":[{"internalType":"uint256","name":"proceedTokenAmountLimit","type":"uint256"},{"internalType":"address","name":"proceedTokenAddress","type":"address"},{"internalType":"uint256","name":"price","type":"uint256"},{"internalType":"uint256","name":"date","type":"uint256"}],"internalType":"struct PV01SinglePaymentBondV2.RolloverCommitmentInternal","name":"rolloverCommitmentInternal","type":"tuple"}],"internalType":"struct PV01SinglePaymentBondV2.RolloverCommitmentExternal","name":"rolloverCommitment","type":"tuple"}],"name":"addRolloverCommitment","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"addressScreen","outputs":[{"internalType":"contract IAddressScreen","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"}],"name":"allowance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"approve","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"assetToken","outputs":[{"internalType":"contract IERC20Standard","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"assetTokenDecimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"bondIssuer","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"burn","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"burnFrom","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"claim","outputs":[{"internalType":"uint256","name":"bondTokenAmount","type":"uint256"},{"internalType":"uint256","name":"assetTokenAmount","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"collateralId","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"decimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"subtractedValue","type":"uint256"}],"name":"decreaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"getAllDocumentNames","outputs":[{"internalType":"string[]","name":"","type":"string[]"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getAllDocuments","outputs":[{"components":[{"internalType":"string","name":"docName","type":"string"},{"internalType":"bytes32","name":"docNameHash","type":"bytes32"},{"internalType":"bytes32","name":"docHashSha256","type":"bytes32"},{"internalType":"uint256","name":"lastModified","type":"uint256"},{"internalType":"string","name":"uri","type":"string"}],"internalType":"struct PV01SinglePaymentBondV2.DocumentDetail[]","name":"","type":"tuple[]"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getAllFundingCommitment","outputs":[{"components":[{"internalType":"address","name":"address_","type":"address"},{"components":[{"internalType":"uint256","name":"bondTokenAmount","type":"uint256"},{"internalType":"uint256","name":"proceed","type":"uint256"},{"internalType":"uint256","name":"date","type":"uint256"}],"internalType":"struct PV01SinglePaymentBondV2.FundingCommitmentInternal","name":"fundingCommitmentInternal","type":"tuple"}],"internalType":"struct PV01SinglePaymentBondV2.FundingCommitmentExternal[]","name":"","type":"tuple[]"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getAllRolloverCommitment","outputs":[{"components":[{"internalType":"address","name":"address_","type":"address"},{"components":[{"internalType":"uint256","name":"proceedTokenAmountLimit","type":"uint256"},{"internalType":"address","name":"proceedTokenAddress","type":"address"},{"internalType":"uint256","name":"price","type":"uint256"},{"internalType":"uint256","name":"date","type":"uint256"}],"internalType":"struct PV01SinglePaymentBondV2.RolloverCommitmentInternal","name":"rolloverCommitmentInternal","type":"tuple"}],"internalType":"struct PV01SinglePaymentBondV2.RolloverCommitmentExternal[]","name":"","type":"tuple[]"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getAmountToRepay","outputs":[{"internalType":"uint256","name":"assetTokenAmount","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getBondIssuer","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"string","name":"docName","type":"string"}],"name":"getDocument","outputs":[{"components":[{"internalType":"string","name":"docName","type":"string"},{"internalType":"bytes32","name":"docNameHash","type":"bytes32"},{"internalType":"bytes32","name":"docHashSha256","type":"bytes32"},{"internalType":"uint256","name":"lastModified","type":"uint256"},{"internalType":"string","name":"uri","type":"string"}],"internalType":"struct PV01SinglePaymentBondV2.DocumentDetail","name":"","type":"tuple"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"bondTokenAmount_","type":"uint256"}],"name":"getFinalAmount","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"user_","type":"address"}],"name":"getFinalAmount","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"userAddress","type":"address"}],"name":"getFundingCommitment","outputs":[{"components":[{"internalType":"uint256","name":"bondTokenAmount","type":"uint256"},{"internalType":"uint256","name":"proceed","type":"uint256"},{"internalType":"uint256","name":"date","type":"uint256"}],"internalType":"struct PV01SinglePaymentBondV2.FundingCommitmentInternal","name":"","type":"tuple"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getFundingCommitmentInvestors","outputs":[{"internalType":"address[]","name":"","type":"address[]"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getSweepDate","outputs":[{"internalType":"uint64","name":"","type":"uint64"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"addedValue","type":"uint256"}],"name":"increaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"string","name":"name_","type":"string"},{"internalType":"string","name":"symbol_","type":"string"},{"components":[{"internalType":"address","name":"address_","type":"address"},{"components":[{"internalType":"uint256","name":"bondTokenAmount","type":"uint256"},{"internalType":"uint256","name":"proceed","type":"uint256"},{"internalType":"uint256","name":"date","type":"uint256"}],"internalType":"struct PV01SinglePaymentBondV2.FundingCommitmentInternal","name":"fundingCommitmentInternal","type":"tuple"}],"internalType":"struct PV01SinglePaymentBondV2.FundingCommitmentExternal[]","name":"fundingCommitments_","type":"tuple[]"},{"internalType":"address","name":"assetTokenAddress_","type":"address"},{"internalType":"uint64","name":"interestRateFraction_","type":"uint64"},{"internalType":"uint64","name":"maturityDate_","type":"uint64"},{"internalType":"address","name":"bondIssuer_","type":"address"},{"internalType":"address","name":"addressScreen_","type":"address"},{"internalType":"uint64","name":"sweepDate_","type":"uint64"},{"internalType":"address","name":"owner_","type":"address"},{"internalType":"string","name":"collateralId_","type":"string"}],"name":"initialize","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"interestRateFraction","outputs":[{"internalType":"uint64","name":"","type":"uint64"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"isRepaidInFull","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"maturityDate","outputs":[{"internalType":"uint64","name":"","type":"uint64"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"pause","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"paused","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"userAddress","type":"address"}],"name":"removeFundingCommitment","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address[]","name":"userAddresses","type":"address[]"}],"name":"removeFundingCommitments","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"userAddress","type":"address"}],"name":"removeRolloverCommitment","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newAddress","type":"address"},{"internalType":"string","name":"reason","type":"string"}],"name":"setAddressScreenContract","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint64","name":"newDate","type":"uint64"},{"internalType":"string","name":"reason","type":"string"}],"name":"setMaturityDate","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"settleBondPurchase","outputs":[{"internalType":"uint256","name":"bondTokenAmount","type":"uint256"},{"internalType":"uint256","name":"proceed","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"settleBondPurchaseRollover","outputs":[{"internalType":"address","name":"proceedTokenAddress","type":"address"},{"internalType":"uint256","name":"proceed","type":"uint256"},{"internalType":"uint256","name":"bondTokenAmount","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes4","name":"interfaceId","type":"bytes4"}],"name":"supportsInterface","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"sweep","outputs":[{"internalType":"uint256","name":"transferAmount","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"sweepDelaySecondsFromMaturityDate","outputs":[{"internalType":"uint64","name":"","type":"uint64"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"otherTokenAddress","type":"address"}],"name":"sweepOther","outputs":[{"internalType":"uint256","name":"transferAmount","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transfer","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transferFrom","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"unpause","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"components":[{"internalType":"address","name":"address_","type":"address"},{"components":[{"internalType":"uint256","name":"bondTokenAmount","type":"uint256"},{"internalType":"uint256","name":"proceed","type":"uint256"},{"internalType":"uint256","name":"date","type":"uint256"}],"internalType":"struct PV01SinglePaymentBondV2.FundingCommitmentInternal","name":"fundingCommitmentInternal","type":"tuple"}],"internalType":"struct PV01SinglePaymentBondV2.FundingCommitmentExternal","name":"fundingCommitment","type":"tuple"}],"name":"updateFundingCommitment","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"components":[{"internalType":"address","name":"address_","type":"address"},{"components":[{"internalType":"uint256","name":"bondTokenAmount","type":"uint256"},{"internalType":"uint256","name":"proceed","type":"uint256"},{"internalType":"uint256","name":"date","type":"uint256"}],"internalType":"struct PV01SinglePaymentBondV2.FundingCommitmentInternal","name":"fundingCommitmentInternal","type":"tuple"}],"internalType":"struct PV01SinglePaymentBondV2.FundingCommitmentExternal[]","name":"fundingCommitments_","type":"tuple[]"}],"name":"updateFundingCommitments","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"components":[{"internalType":"address","name":"address_","type":"address"},{"components":[{"internalType":"uint256","name":"proceedTokenAmountLimit","type":"uint256"},{"internalType":"address","name":"proceedTokenAddress","type":"address"},{"internalType":"uint256","name":"price","type":"uint256"},{"internalType":"uint256","name":"date","type":"uint256"}],"internalType":"struct PV01SinglePaymentBondV2.RolloverCommitmentInternal","name":"rolloverCommitmentInternal","type":"tuple"}],"internalType":"struct PV01SinglePaymentBondV2.RolloverCommitmentExternal","name":"rolloverCommitment","type":"tuple"}],"name":"updateRolloverCommitment","outputs":[],"stateMutability":"nonpayable","type":"function"},{"stateMutability":"payable","type":"receive"}]