Contract Source Code (Solidity)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

/**
 *Submitted for verification at Etherscan.io on 2025-07-20
*/

// SPDX-License-Identifier: MIT



// File @openzeppelin/contracts/interfaces/draft-IERC6093.sol@v5.3.0

// Original license: SPDX_License_Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (interfaces/draft-IERC6093.sol)
pragma solidity ^0.8.20;

/**
 * @dev Standard ERC-20 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC-20 tokens.
 */
interface IERC20Errors {
    /**
     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param balance Current balance for the interacting account.
     * @param needed Minimum amount required to perform a transfer.
     */
    error ERC20InsufficientBalance(address sender, uint256 balance, uint256 needed);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC20InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC20InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `spender`’s `allowance`. Used in transfers.
     * @param spender Address that may be allowed to operate on tokens without being their owner.
     * @param allowance Amount of tokens a `spender` is allowed to operate with.
     * @param needed Minimum amount required to perform a transfer.
     */
    error ERC20InsufficientAllowance(address spender, uint256 allowance, uint256 needed);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC20InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `spender` to be approved. Used in approvals.
     * @param spender Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC20InvalidSpender(address spender);
}

/**
 * @dev Standard ERC-721 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC-721 tokens.
 */
interface IERC721Errors {
    /**
     * @dev Indicates that an address can't be an owner. For example, `address(0)` is a forbidden owner in ERC-20.
     * Used in balance queries.
     * @param owner Address of the current owner of a token.
     */
    error ERC721InvalidOwner(address owner);

    /**
     * @dev Indicates a `tokenId` whose `owner` is the zero address.
     * @param tokenId Identifier number of a token.
     */
    error ERC721NonexistentToken(uint256 tokenId);

    /**
     * @dev Indicates an error related to the ownership over a particular token. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param tokenId Identifier number of a token.
     * @param owner Address of the current owner of a token.
     */
    error ERC721IncorrectOwner(address sender, uint256 tokenId, address owner);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC721InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC721InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     * @param tokenId Identifier number of a token.
     */
    error ERC721InsufficientApproval(address operator, uint256 tokenId);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC721InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC721InvalidOperator(address operator);
}

/**
 * @dev Standard ERC-1155 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC-1155 tokens.
 */
interface IERC1155Errors {
    /**
     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param balance Current balance for the interacting account.
     * @param needed Minimum amount required to perform a transfer.
     * @param tokenId Identifier number of a token.
     */
    error ERC1155InsufficientBalance(address sender, uint256 balance, uint256 needed, uint256 tokenId);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC1155InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC1155InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     * @param owner Address of the current owner of a token.
     */
    error ERC1155MissingApprovalForAll(address operator, address owner);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC1155InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC1155InvalidOperator(address operator);

    /**
     * @dev Indicates an array length mismatch between ids and values in a safeBatchTransferFrom operation.
     * Used in batch transfers.
     * @param idsLength Length of the array of token identifiers
     * @param valuesLength Length of the array of token amounts
     */
    error ERC1155InvalidArrayLength(uint256 idsLength, uint256 valuesLength);
}


// File @openzeppelin/contracts/token/ERC20/IERC20.sol@v5.3.0

// Original license: SPDX_License_Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC-20 standard as defined in the ERC.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the value of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the value of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 value) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 value) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the
     * allowance mechanism. `value` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 value) external returns (bool);
}


// File @openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol@v5.3.0

// Original license: SPDX_License_Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface for the optional metadata functions from the ERC-20 standard.
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}


// File @openzeppelin/contracts/utils/Context.sol@v5.3.0

// Original license: SPDX_License_Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)

pragma solidity ^0.8.20;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    function _contextSuffixLength() internal view virtual returns (uint256) {
        return 0;
    }
}


// File @openzeppelin/contracts/token/ERC20/ERC20.sol@v5.3.0

// Original license: SPDX_License_Identifier: MIT
// OpenZeppelin Contracts (last updated v5.3.0) (token/ERC20/ERC20.sol)

pragma solidity ^0.8.20;




/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * The default value of {decimals} is 18. To change this, you should override
 * this function so it returns a different value.
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC-20
 * applications.
 */
abstract contract ERC20 is Context, IERC20, IERC20Metadata, IERC20Errors {
    mapping(address account => uint256) private _balances;

    mapping(address account => mapping(address spender => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * Both values are immutable: they can only be set once during construction.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the default value returned by this function, unless
     * it's overridden.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual returns (uint8) {
        return 18;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - the caller must have a balance of at least `value`.
     */
    function transfer(address to, uint256 value) public virtual returns (bool) {
        address owner = _msgSender();
        _transfer(owner, to, value);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * NOTE: If `value` is the maximum `uint256`, the allowance is not updated on
     * `transferFrom`. This is semantically equivalent to an infinite approval.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 value) public virtual returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, value);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Skips emitting an {Approval} event indicating an allowance update. This is not
     * required by the ERC. See {xref-ERC20-_approve-address-address-uint256-bool-}[_approve].
     *
     * NOTE: Does not update the allowance if the current allowance
     * is the maximum `uint256`.
     *
     * Requirements:
     *
     * - `from` and `to` cannot be the zero address.
     * - `from` must have a balance of at least `value`.
     * - the caller must have allowance for ``from``'s tokens of at least
     * `value`.
     */
    function transferFrom(address from, address to, uint256 value) public virtual returns (bool) {
        address spender = _msgSender();
        _spendAllowance(from, spender, value);
        _transfer(from, to, value);
        return true;
    }

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead.
     */
    function _transfer(address from, address to, uint256 value) internal {
        if (from == address(0)) {
            revert ERC20InvalidSender(address(0));
        }
        if (to == address(0)) {
            revert ERC20InvalidReceiver(address(0));
        }
        _update(from, to, value);
    }

    /**
     * @dev Transfers a `value` amount of tokens from `from` to `to`, or alternatively mints (or burns) if `from`
     * (or `to`) is the zero address. All customizations to transfers, mints, and burns should be done by overriding
     * this function.
     *
     * Emits a {Transfer} event.
     */
    function _update(address from, address to, uint256 value) internal virtual {
        if (from == address(0)) {
            // Overflow check required: The rest of the code assumes that totalSupply never overflows
            _totalSupply += value;
        } else {
            uint256 fromBalance = _balances[from];
            if (fromBalance < value) {
                revert ERC20InsufficientBalance(from, fromBalance, value);
            }
            unchecked {
                // Overflow not possible: value <= fromBalance <= totalSupply.
                _balances[from] = fromBalance - value;
            }
        }

        if (to == address(0)) {
            unchecked {
                // Overflow not possible: value <= totalSupply or value <= fromBalance <= totalSupply.
                _totalSupply -= value;
            }
        } else {
            unchecked {
                // Overflow not possible: balance + value is at most totalSupply, which we know fits into a uint256.
                _balances[to] += value;
            }
        }

        emit Transfer(from, to, value);
    }

    /**
     * @dev Creates a `value` amount of tokens and assigns them to `account`, by transferring it from address(0).
     * Relies on the `_update` mechanism
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead.
     */
    function _mint(address account, uint256 value) internal {
        if (account == address(0)) {
            revert ERC20InvalidReceiver(address(0));
        }
        _update(address(0), account, value);
    }

    /**
     * @dev Destroys a `value` amount of tokens from `account`, lowering the total supply.
     * Relies on the `_update` mechanism.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead
     */
    function _burn(address account, uint256 value) internal {
        if (account == address(0)) {
            revert ERC20InvalidSender(address(0));
        }
        _update(account, address(0), value);
    }

    /**
     * @dev Sets `value` as the allowance of `spender` over the `owner`'s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     *
     * Overrides to this logic should be done to the variant with an additional `bool emitEvent` argument.
     */
    function _approve(address owner, address spender, uint256 value) internal {
        _approve(owner, spender, value, true);
    }

    /**
     * @dev Variant of {_approve} with an optional flag to enable or disable the {Approval} event.
     *
     * By default (when calling {_approve}) the flag is set to true. On the other hand, approval changes made by
     * `_spendAllowance` during the `transferFrom` operation set the flag to false. This saves gas by not emitting any
     * `Approval` event during `transferFrom` operations.
     *
     * Anyone who wishes to continue emitting `Approval` events on the`transferFrom` operation can force the flag to
     * true using the following override:
     *
     * ```solidity
     * function _approve(address owner, address spender, uint256 value, bool) internal virtual override {
     *     super._approve(owner, spender, value, true);
     * }
     * ```
     *
     * Requirements are the same as {_approve}.
     */
    function _approve(address owner, address spender, uint256 value, bool emitEvent) internal virtual {
        if (owner == address(0)) {
            revert ERC20InvalidApprover(address(0));
        }
        if (spender == address(0)) {
            revert ERC20InvalidSpender(address(0));
        }
        _allowances[owner][spender] = value;
        if (emitEvent) {
            emit Approval(owner, spender, value);
        }
    }

    /**
     * @dev Updates `owner`'s allowance for `spender` based on spent `value`.
     *
     * Does not update the allowance value in case of infinite allowance.
     * Revert if not enough allowance is available.
     *
     * Does not emit an {Approval} event.
     */
    function _spendAllowance(address owner, address spender, uint256 value) internal virtual {
        uint256 currentAllowance = allowance(owner, spender);
        if (currentAllowance < type(uint256).max) {
            if (currentAllowance < value) {
                revert ERC20InsufficientAllowance(spender, currentAllowance, value);
            }
            unchecked {
                _approve(owner, spender, currentAllowance - value, false);
            }
        }
    }
}


// File contracts/token/ERC20/extensions/ERC20Decimals.sol

// Original license: SPDX_License_Identifier: MIT

pragma solidity ^0.8.20;

/**
 * @title ERC20Decimals
 * @dev Extension of ERC20 that adds decimals storage slot.
 */
abstract contract ERC20Decimals is ERC20 {
    // indicates the decimals amount
    uint8 private immutable _decimals;

    /**
     * @dev Sets the value of the `_decimals`.
     * This value is immutable, it can only be set once during construction.
     */
    constructor(uint8 decimals_) {
        _decimals = decimals_;
    }

    /**
     * @inheritdoc IERC20Metadata
     */
    function decimals() public view virtual override returns (uint8) {
        return _decimals;
    }
}


// File contracts/token/ERC20/extensions/ERC20Detailed.sol

// Original license: SPDX_License_Identifier: MIT

pragma solidity ^0.8.20;

/**
 * @title ERC20Detailed
 * @dev Extension of ERC20 and ERC20Decimals.
 */
abstract contract ERC20Detailed is ERC20Decimals {
    constructor(
        string memory name_,
        string memory symbol_,
        uint8 decimals_
    ) ERC20(name_, symbol_) ERC20Decimals(decimals_) {}
}


// File contracts/service/ServicePayer.sol

// Original license: SPDX_License_Identifier: MIT

pragma solidity ^0.8.20;

/**
 * @title IPayable
 */
interface IPayable {
    function pay(string calldata serviceName, bytes calldata signature, address wallet) external payable;
}

/**
 * @title ServicePayer
 * @dev Utility contract to pay the deployment fee. Used only during construction.
 */
abstract contract ServicePayer {
    constructor(address payable receiver, string memory serviceName, bytes memory signature, address wallet) payable {
        IPayable(receiver).pay{value: msg.value}(serviceName, signature, wallet);
    }
}


// File contracts/token/ERC20/StandardERC20.sol

// Original license: SPDX_License_Identifier: MIT

pragma solidity ^0.8.20;

/**
 * @title StandardERC20
 * @dev Implementation of the StandardERC20.
 */
contract StandardERC20 is ERC20Detailed, ServicePayer {
    constructor(
        string memory name_,
        string memory symbol_,
        uint8 decimals_,
        uint256 initialBalance_,
        bytes memory signature_,
        address payable feeReceiver_
    )
        payable
        ERC20Detailed(name_, symbol_, decimals_)
        ServicePayer(feeReceiver_, "StandardERC20", signature_, _msgSender())
    {
        require(initialBalance_ > 0, "Initial supply cannot be zero");

        _mint(_msgSender(), initialBalance_);
    }
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"string","name":"name_","type":"string"},{"internalType":"string","name":"symbol_","type":"string"},{"internalType":"uint8","name":"decimals_","type":"uint8"},{"internalType":"uint256","name":"initialBalance_","type":"uint256"},{"internalType":"bytes","name":"signature_","type":"bytes"},{"internalType":"address payable","name":"feeReceiver_","type":"address"}],"stateMutability":"payable","type":"constructor"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"allowance","type":"uint256"},{"internalType":"uint256","name":"needed","type":"uint256"}],"name":"ERC20InsufficientAllowance","type":"error"},{"inputs":[{"internalType":"address","name":"sender","type":"address"},{"internalType":"uint256","name":"balance","type":"uint256"},{"internalType":"uint256","name":"needed","type":"uint256"}],"name":"ERC20InsufficientBalance","type":"error"},{"inputs":[{"internalType":"address","name":"approver","type":"address"}],"name":"ERC20InvalidApprover","type":"error"},{"inputs":[{"internalType":"address","name":"receiver","type":"address"}],"name":"ERC20InvalidReceiver","type":"error"},{"inputs":[{"internalType":"address","name":"sender","type":"address"}],"name":"ERC20InvalidSender","type":"error"},{"inputs":[{"internalType":"address","name":"spender","type":"address"}],"name":"ERC20InvalidSpender","type":"error"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"spender","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Transfer","type":"event"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"}],"name":"allowance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"approve","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"decimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"transfer","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"transferFrom","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"}]

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

-----Decoded View---------------
Arg [0] : name_ (string): CourtAuctionGroup [경매그룹오메가]
Arg [1] : symbol_ (string): CAGO
Arg [2] : decimals_ (uint8): 18
Arg [3] : initialBalance_ (uint256): 10000000000000000000000000000
Arg [4] : signature_ (bytes): 0x9657a2818db3de430487005ae891fe995d00f652c10cc13d54b69852d437c79d109091e1bd95a1355dcb23211e8a0f54d079eeb90a4bf0340fa8832224191ed21b
Arg [5] : feeReceiver_ (address): 0x75Eee167D2E5cC675f5b07f95d6A93E7088d6c34

-----Encoded View---------------
15 Constructor Arguments found :
Arg [0] : 00000000000000000000000000000000000000000000000000000000000000c0
Arg [1] : 0000000000000000000000000000000000000000000000000000000000000120
Arg [2] : 0000000000000000000000000000000000000000000000000000000000000012
Arg [3] : 0000000000000000000000000000000000000000204fce5e3e25026110000000
Arg [4] : 0000000000000000000000000000000000000000000000000000000000000160
Arg [5] : 00000000000000000000000075eee167d2e5cc675f5b07f95d6a93e7088d6c34
Arg [6] : 0000000000000000000000000000000000000000000000000000000000000029
Arg [7] : 436f75727441756374696f6e47726f7570205beab2bdeba7a4eab7b8eba3b9ec
Arg [8] : 98a4eba994eab0805d0000000000000000000000000000000000000000000000
Arg [9] : 0000000000000000000000000000000000000000000000000000000000000004
Arg [10] : 4341474f00000000000000000000000000000000000000000000000000000000
Arg [11] : 0000000000000000000000000000000000000000000000000000000000000041
Arg [12] : 9657a2818db3de430487005ae891fe995d00f652c10cc13d54b69852d437c79d
Arg [13] : 109091e1bd95a1355dcb23211e8a0f54d079eeb90a4bf0340fa8832224191ed2
Arg [14] : 1b00000000000000000000000000000000000000000000000000000000000000